linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Berthold Cogel <cogel@uni-koeln.de>
To: linux-kernel@vger.kernel.org
Subject: BUG: system hangs in DRM during/after radeon init with linux-2.6.36-rc5
Date: Sun, 26 Sep 2010 23:13:23 +0200	[thread overview]
Message-ID: <4C9FB773.9010903@uni-koeln.de> (raw)

Hello!

I wanted to verify if the problem I've reported two weeks ago (Oops in
linux-2.6.34.3 radeon at xserver start) is still present in newer
versions. I've build linux-2.6.36-rc5 (config from working
linux-2.6.34.2, make oldconfig ....) and the system got stuck during
boot. Last line on screen was a message from DRM about initializing
radeon. No bug, no Oops... Nothing. And nothing in the logs ... to early...

Hardware:
Asus P6T
Intel Core i7
12 GB RAM
HIS HD4670 IceQ Turbo PCIe

System is Debian stable/testing x86_64.

Output of lspci:

00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port
(rev 12)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 (rev 12)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 (rev 12)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 (rev 12)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers (rev 12)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers (rev 12)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and
RAS Registers (rev 12)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
(rev 12)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 4
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2
02:00.0 VGA compatible controller: ATI Technologies Inc RV730XT [Radeon
HD 4670]
02:00.1 Audio device: ATI Technologies Inc RV710/730
04:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series
Firewire Controller
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)

This problem didn't occur with 2.6.35.4 (although this version had the
problem with the Oops mentioned above). I haven't tested earlier
2.6.36-rc versions yet.


Regards,
Berthold Cogel

             reply	other threads:[~2010-09-26 21:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-26 21:13 Berthold Cogel [this message]
2010-09-26 23:01 ` BUG: system hangs in DRM during/after radeon init with linux-2.6.36-rc5 Berthold Cogel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C9FB773.9010903@uni-koeln.de \
    --to=cogel@uni-koeln.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).