[PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[Tejun Heo]

Hello,

There are multiple ways to represent memory configuration during boot.
Even with the latest incarnation - nobootmem, the configuration isn't
centralized or easy to use.  NUMA information lives in
early_node_map[] while memory config and alloc/reservation live in
memblock.  This leads to ugly code pieces which try to combine the two
separate information sources both in generic and arch specfic parts.

This patchset extends memblock such that it can also host node
information and allows an arch to do away with early_node_map[] and
use memblock as the sole early memory config / allocation mechanism.

For short term, this adds yet another config option -
HAVE_MEMBLOCK_NODE_MAP in this area.  Longer term goal is removing
early_node_map[] completely and convert everyone over to memblock.  As
early_node_map[] usage is limited only to NUMA archs, this should be
easiser than bootmem allocator conversion.  In the end, memblock will
be the only early mem mechanism.

Note that this patchset still leaves good amount of code which can be
removed / cleaned up in not too distant future.  For example, memblock
non-NUMA alloc code can simply be degenerate case of NUMA aware alloc,
which can also be implemented in simpler and more efficient way with
reverse free area iterator.

This patchset first extends memblock so that it can contain node
information and then replaces x86 specific memblock code with the
generic one.

 0001-memblock-Remove-memblock_memory_can_coalesce.patch
 0002-memblock-Reimplement-memblock_add_region.patch
 0003-memblock-Add-optional-region-nid.patch
 0004-x86-Use-HAVE_MEMBLOCK_NODE_MAP.patch
 0005-x86-Use-__memblock_alloc_base-in-early_reserve_e820.patch
 0006-memblock-Implement-for_each_free_mem_range.patch
 0007-x86-Replace-memblock_x86_find_in_range_size-with-for.patch
 0008-memblock-x86-Make-free_all_memory_core_early-explici.patch
 0009-memblock-x86-Replace-__get_free_all_memory_range-wit.patch
 0010-memblock-x86-Reimplement-memblock_find_dma_reserve-u.patch
 0011-x86-Use-absent_pages_in_range-instead-of-memblock_x8.patch
 0012-memblock-x86-Make-ARCH_DISCARD_MEMBLOCK-a-config-opt.patch
 0013-memblock-x86-Replace-memblock_x86_reserve-free_range.patch

0001-0004 implement HAVE_MEMBLOCK_NODE_MAP and use it in x86.

0005-0013 adds generic memblock free area iterator and gradually
replaces x86 specific memblock mechanism with generic one.

This patchset is on top of

  x86/urgent (5da0ef9a85 "x86: Disable AMD_NUMA for 32bit for now")
+ pfn->nid granularity check patches [1]
+ "memblock, x86: Misc cleanups" patchset [2]
+ "memblock, x86: Implement for_each_mem_pfn_range() and use it to improve memblock allocator" patchset [3]

and available in the following git branch.

 git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git review-x86-mm-memblock

Diffstat follows.

 arch/x86/Kconfig                |    2
 arch/x86/include/asm/e820.h     |    2
 arch/x86/include/asm/memblock.h |   22 --
 arch/x86/kernel/aperture_64.c   |    2
 arch/x86/kernel/check.c         |   34 +--
 arch/x86/kernel/e820.c          |   55 ++---
 arch/x86/kernel/head.c          |    2
 arch/x86/kernel/head32.c        |    5
 arch/x86/kernel/head64.c        |    5
 arch/x86/kernel/mpparse.c       |   12 -
 arch/x86/kernel/setup.c         |   17 -
 arch/x86/kernel/trampoline.c    |    2
 arch/x86/mm/Makefile            |    2
 arch/x86/mm/init.c              |    6
 arch/x86/mm/init_32.c           |   28 +-
 arch/x86/mm/memblock.c          |  318 ----------------------------
 arch/x86/mm/memtest.c           |   33 +--
 arch/x86/mm/numa.c              |   24 +-
 arch/x86/mm/numa_32.c           |    6
 arch/x86/mm/numa_64.c           |    2
 arch/x86/mm/numa_emulation.c    |   34 +--
 arch/x86/platform/efi/efi.c     |    6
 arch/x86/xen/mmu.c              |   12 -
 arch/x86/xen/setup.c            |    7
 include/linux/bootmem.h         |    2
 include/linux/memblock.h        |   54 ++++
 include/linux/mm.h              |    2
 mm/Kconfig                      |    6
 mm/memblock.c                   |  440 ++++++++++++++++++++++++++++------------
 mm/nobootmem.c                  |   40 ++-
 mm/page_alloc.c                 |   47 ++--
 31 files changed, 554 insertions(+), 675 deletions(-)

Thanks.

--
tejun

[1] http://thread.gmane.org/gmane.linux.kernel/1166521
[2] http://thread.gmane.org/gmane.linux.kernel.cross-arch/10338
[3] http://thread.gmane.org/gmane.linux.kernel.cross-arch/10345

[PATCH 01/13] memblock: Remove memblock_memory_can_coalesce()

[Tejun Heo]

Arch could implement memblock_memor_can_coalesce() to veto merging of
adjacent or overlapping memblock regions; however, no arch did and any
vetoing would trigger WARN_ON().  Memblock regions are supposed to
deal with proper memory anyway.  Remove the unused hook.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/linux/memblock.h |    4 ----
 mm/memblock.c            |   29 -----------------------------
 2 files changed, 0 insertions(+), 33 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 7400d02..aa5df9e 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -92,10 +92,6 @@ extern int memblock_is_region_reserved(phys_addr_t base, phys_addr_t size);
 
 extern void memblock_dump_all(void);
 
-/* Provided by the architecture */
-extern int memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1,
-				   phys_addr_t addr2, phys_addr_t size2);
-
 /**
  * memblock_set_current_limit - Set the current allocation limit to allow
  *                         limiting allocations to what is currently
diff --git a/mm/memblock.c b/mm/memblock.c
index a8edb42..bd3a3a9 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -251,12 +251,6 @@ static int __init_memblock memblock_double_array(struct memblock_type *type)
 	return 0;
 }
 
-extern int __init_memblock __weak memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1,
-					  phys_addr_t addr2, phys_addr_t size2)
-{
-	return 1;
-}
-
 static long __init_memblock memblock_add_region(struct memblock_type *type,
 						phys_addr_t base, phys_addr_t size)
 {
@@ -282,17 +276,6 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		 * of a block.
 		 */
 		if (base < rgn->base && end >= rgn->base) {
-			/* If we can't coalesce, create a new block */
-			if (!memblock_memory_can_coalesce(base, size,
-							  rgn->base,
-							  rgn->size)) {
-				/* Overlap & can't coalesce are mutually
-				 * exclusive, if you do that, be prepared
-				 * for trouble
-				 */
-				WARN_ON(end != rgn->base);
-				goto new_block;
-			}
 			/* We extend the bottom of the block down to our
 			 * base
 			 */
@@ -316,17 +299,6 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		 * top of a block
 		 */
 		if (base <= rend && end >= rend) {
-			/* If we can't coalesce, create a new block */
-			if (!memblock_memory_can_coalesce(rgn->base,
-							  rgn->size,
-							  base, size)) {
-				/* Overlap & can't coalesce are mutually
-				 * exclusive, if you do that, be prepared
-				 * for trouble
-				 */
-				WARN_ON(rend != base);
-				goto new_block;
-			}
 			/* We adjust our base down to enclose the
 			 * original block and destroy it. It will be
 			 * part of our new allocation. Since we've
@@ -349,7 +321,6 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		return 0;
 	}
 
- new_block:
 	/* If we are out of space, we fail. It's too late to resize the array
 	 * but then this shouldn't have happened in the first place.
 	 */
-- 
1.7.6

[PATCH 02/13] memblock: Reimplement memblock_add_region()

[Tejun Heo]

memblock_add_region() carefully checked for merge and overlap
conditions while adding a new region, which is complicated and makes
it difficult to allow arbitrary overlaps or add more merge conditions
(e.g. node ID).

This re-implements memblock_add_region() such that insertion is done
in two steps - all non-overlapping portions of new area are inserted
as separate regions first and then memblock_merge_regions() scan and
merge all neighbouring compatible regions.

This makes addition logic simpler and more versatile and enables
adding node information to memblock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 mm/memblock.c |  197 ++++++++++++++++++++++++++++++++-------------------------
 1 files changed, 111 insertions(+), 86 deletions(-)

diff --git a/mm/memblock.c b/mm/memblock.c
index bd3a3a9..992aa18 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -251,117 +251,142 @@ static int __init_memblock memblock_double_array(struct memblock_type *type)
 	return 0;
 }
 
-static long __init_memblock memblock_add_region(struct memblock_type *type,
-						phys_addr_t base, phys_addr_t size)
+/**
+ * memblock_merge_regions - merge neighboring compatible regions
+ * @type: memblock type to scan
+ *
+ * Scan @type and merge neighboring compatible regions.
+ */
+static void __init_memblock memblock_merge_regions(struct memblock_type *type)
 {
-	phys_addr_t end = base + size;
-	int i, slot = -1;
+	int i = 0;
 
-	/* First try and coalesce this MEMBLOCK with others */
-	for (i = 0; i < type->cnt; i++) {
-		struct memblock_region *rgn = &type->regions[i];
-		phys_addr_t rend = rgn->base + rgn->size;
+	/* cnt never goes below 1 */
+	while (i < type->cnt - 1) {
+		struct memblock_region *this = &type->regions[i];
+		struct memblock_region *next = &type->regions[i + 1];
 
-		/* Exit if there's no possible hits */
-		if (rgn->base > end || rgn->size == 0)
-			break;
-
-		/* Check if we are fully enclosed within an existing
-		 * block
-		 */
-		if (rgn->base <= base && rend >= end)
-			return 0;
+		if (this->base + this->size != next->base) {
+			BUG_ON(this->base + this->size > next->base);
+			i++;
+			continue;
+		}
 
-		/* Check if we overlap or are adjacent with the bottom
-		 * of a block.
-		 */
-		if (base < rgn->base && end >= rgn->base) {
-			/* We extend the bottom of the block down to our
-			 * base
-			 */
-			rgn->base = base;
-			rgn->size = rend - base;
+		this->size += next->size;
+		memmove(next, next + 1, (type->cnt - (i + 1)) * sizeof(*next));
+		type->cnt--;
+	}
+}
 
-			/* Return if we have nothing else to allocate
-			 * (fully coalesced)
-			 */
-			if (rend >= end)
-				return 0;
+/**
+ * memblock_insert_region - insert new memblock region
+ * @type: memblock type to insert into
+ * @idx: index for the insertion point
+ * @base: base address of the new region
+ * @size: size of the new region
+ *
+ * Insert new memblock region [@base,@base+@size) into @type at @idx.
+ * @type must already have extra room to accomodate the new region.
+ */
+static void __init_memblock memblock_insert_region(struct memblock_type *type,
+						   int idx, phys_addr_t base,
+						   phys_addr_t size)
+{
+	struct memblock_region *rgn = &type->regions[idx];
 
-			/* We continue processing from the end of the
-			 * coalesced block.
-			 */
-			base = rend;
-			size = end - base;
-		}
+	BUG_ON(type->cnt >= type->max);
+	memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn));
+	rgn->base = base;
+	rgn->size = size;
+	type->cnt++;
+}
 
-		/* Now check if we overlap or are adjacent with the
-		 * top of a block
-		 */
-		if (base <= rend && end >= rend) {
-			/* We adjust our base down to enclose the
-			 * original block and destroy it. It will be
-			 * part of our new allocation. Since we've
-			 * freed an entry, we know we won't fail
-			 * to allocate one later, so we won't risk
-			 * losing the original block allocation.
-			 */
-			size += (base - rgn->base);
-			base = rgn->base;
-			memblock_remove_region(type, i--);
-		}
-	}
+/**
+ * memblock_add_region - add new memblock region
+ * @type: memblock type to add new region into
+ * @base: base address of the new region
+ * @size: size of the new region
+ *
+ * Add new memblock region [@base,@base+@size) into @type.  The new region
+ * is allowed to overlap with existing ones - overlaps don't affect already
+ * existing regions.  @type is guaranteed to be minimal (all neighbouring
+ * compatible regions are merged) after the addition.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static long __init_memblock memblock_add_region(struct memblock_type *type,
+						phys_addr_t base, phys_addr_t size)
+{
+	bool insert = false;
+	phys_addr_t obase = base, end = base + size;
+	int i, nr_new;
 
-	/* If the array is empty, special case, replace the fake
-	 * filler region and return
-	 */
-	if ((type->cnt == 1) && (type->regions[0].size == 0)) {
+	/* special case for empty array */
+	if (type->regions[0].size == 0) {
+		WARN_ON(type->cnt != 1);
 		type->regions[0].base = base;
 		type->regions[0].size = size;
 		return 0;
 	}
-
-	/* If we are out of space, we fail. It's too late to resize the array
-	 * but then this shouldn't have happened in the first place.
+repeat:
+	/*
+	 * The following is executed twice.  Once with %false @insert and
+	 * then with %true.  The first counts the number of regions needed
+	 * to accomodate the new area.  The second actually inserts them.
 	 */
-	if (WARN_ON(type->cnt >= type->max))
-		return -1;
+	base = obase;
+	nr_new = 0;
+
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		phys_addr_t rbase = rgn->base;
+		phys_addr_t rend = rbase + rgn->size;
 
-	/* Couldn't coalesce the MEMBLOCK, so add it to the sorted table. */
-	for (i = type->cnt - 1; i >= 0; i--) {
-		if (base < type->regions[i].base) {
-			type->regions[i+1].base = type->regions[i].base;
-			type->regions[i+1].size = type->regions[i].size;
-		} else {
-			type->regions[i+1].base = base;
-			type->regions[i+1].size = size;
-			slot = i + 1;
+		if (rbase >= end)
 			break;
+		if (rend <= base)
+			continue;
+		/*
+		 * @rgn overlaps.  If it separates the lower part of new
+		 * area, insert that portion.
+		 */
+		if (rbase > base) {
+			nr_new++;
+			if (insert)
+				memblock_insert_region(type, i++, base,
+						       rbase - base);
 		}
+		/* area below @rend is dealt with, forget about it */
+		base = min(rend, end);
 	}
-	if (base < type->regions[0].base) {
-		type->regions[0].base = base;
-		type->regions[0].size = size;
-		slot = 0;
+
+	/* insert the remaining portion */
+	if (base < end) {
+		nr_new++;
+		if (insert)
+			memblock_insert_region(type, i, base, end - base);
 	}
-	type->cnt++;
 
-	/* The array is full ? Try to resize it. If that fails, we undo
-	 * our allocation and return an error
+	/*
+	 * If this was the first round, resize array and repeat for actual
+	 * insertions; otherwise, merge and return.
 	 */
-	if (type->cnt == type->max && memblock_double_array(type)) {
-		BUG_ON(slot < 0);
-		memblock_remove_region(type, slot);
-		return -1;
+	if (!insert) {
+		while (type->cnt + nr_new > type->max)
+			if (memblock_double_array(type) < 0)
+				return -ENOMEM;
+		insert = true;
+		goto repeat;
+	} else {
+		memblock_merge_regions(type);
+		return 0;
 	}
-
-	return 0;
 }
 
 long __init_memblock memblock_add(phys_addr_t base, phys_addr_t size)
 {
 	return memblock_add_region(&memblock.memory, base, size);
-
 }
 
 static long __init_memblock __memblock_remove(struct memblock_type *type,
-- 
1.7.6

[PATCH 03/13] memblock: Add optional region->nid

[Tejun Heo]

Add optional region->nid which can be enabled by arch using
CONFIG_HAVE_MEMBLOCK_NODE_MAP.  When enabled, memblock also carries
NUMA node information and replaces early_node_map[].

Newly added memblocks have MAX_NUMNODES as nid.  Arch can then call
memblock_set_node() to set node information.  memblock takes care of
merging and node affine allocations w.r.t. node information.

When MEMBLOCK_NODE_MAP is enabled, early_node_map[], related data
structures and functions to manipulate and iterate it are disabled.
memblock version of __next_mem_pfn_range() is provided such that
for_each_mem_pfn_range() behaves the same and its users don't have to
be updated.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/linux/memblock.h |   26 +++++++++
 include/linux/mm.h       |    2 +
 mm/Kconfig               |    3 +
 mm/memblock.c            |  141 ++++++++++++++++++++++++++++++++++++++++------
 mm/page_alloc.c          |   47 +++++++++------
 5 files changed, 182 insertions(+), 37 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index aa5df9e..e78a9ad 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -24,6 +24,9 @@
 struct memblock_region {
 	phys_addr_t base;
 	phys_addr_t size;
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+	int nid;
+#endif
 };
 
 struct memblock_type {
@@ -58,6 +61,29 @@ extern long memblock_remove(phys_addr_t base, phys_addr_t size);
 extern long memblock_free(phys_addr_t base, phys_addr_t size);
 extern long memblock_reserve(phys_addr_t base, phys_addr_t size);
 
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+extern int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid);
+
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+	r->nid = nid;
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return r->nid;
+}
+#else
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return 0;
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
 /* The numa aware allocator is only available if
  * CONFIG_ARCH_POPULATES_NODE_MAP is set
  */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 9ebc65a..ceb1e4a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1307,12 +1307,14 @@ extern void free_area_init_node(int nid, unsigned long * zones_size,
  * CONFIG_ARCH_POPULATES_NODE_MAP
  */
 extern void free_area_init_nodes(unsigned long *max_zone_pfn);
+#ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 extern void add_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
 extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
 extern void remove_all_active_ranges(void);
 void sort_node_map(void);
+#endif
 unsigned long node_map_pfn_alignment(void);
 unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn,
 						unsigned long end_pfn);
diff --git a/mm/Kconfig b/mm/Kconfig
index 8ca47a5..30a5d47 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -131,6 +131,9 @@ config SPARSEMEM_VMEMMAP
 config HAVE_MEMBLOCK
 	boolean
 
+config HAVE_MEMBLOCK_NODE_MAP
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/memblock.c b/mm/memblock.c
index 992aa18..766adec 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -161,12 +161,8 @@ int __init_memblock memblock_reserve_reserved_regions(void)
 
 static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
 {
-	unsigned long i;
-
-	for (i = r; i < type->cnt - 1; i++) {
-		type->regions[i].base = type->regions[i + 1].base;
-		type->regions[i].size = type->regions[i + 1].size;
-	}
+	memmove(&type->regions[r], &type->regions[r + 1],
+		(type->cnt - (r + 1)) * sizeof(type->regions[r]));
 	type->cnt--;
 
 	/* Special case for empty arrays */
@@ -174,6 +170,7 @@ static void __init_memblock memblock_remove_region(struct memblock_type *type, u
 		type->cnt = 1;
 		type->regions[0].base = 0;
 		type->regions[0].size = 0;
+		memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
 	}
 }
 
@@ -266,7 +263,9 @@ static void __init_memblock memblock_merge_regions(struct memblock_type *type)
 		struct memblock_region *this = &type->regions[i];
 		struct memblock_region *next = &type->regions[i + 1];
 
-		if (this->base + this->size != next->base) {
+		if (this->base + this->size != next->base ||
+		    memblock_get_region_node(this) !=
+		    memblock_get_region_node(next)) {
 			BUG_ON(this->base + this->size > next->base);
 			i++;
 			continue;
@@ -290,7 +289,7 @@ static void __init_memblock memblock_merge_regions(struct memblock_type *type)
  */
 static void __init_memblock memblock_insert_region(struct memblock_type *type,
 						   int idx, phys_addr_t base,
-						   phys_addr_t size)
+						   phys_addr_t size, int nid)
 {
 	struct memblock_region *rgn = &type->regions[idx];
 
@@ -298,6 +297,7 @@ static void __init_memblock memblock_insert_region(struct memblock_type *type,
 	memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn));
 	rgn->base = base;
 	rgn->size = size;
+	memblock_set_region_node(rgn, nid);
 	type->cnt++;
 }
 
@@ -327,6 +327,7 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		WARN_ON(type->cnt != 1);
 		type->regions[0].base = base;
 		type->regions[0].size = size;
+		memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
 		return 0;
 	}
 repeat:
@@ -355,7 +356,7 @@ repeat:
 			nr_new++;
 			if (insert)
 				memblock_insert_region(type, i++, base,
-						       rbase - base);
+						rbase - base, MAX_NUMNODES);
 		}
 		/* area below @rend is dealt with, forget about it */
 		base = min(rend, end);
@@ -365,7 +366,8 @@ repeat:
 	if (base < end) {
 		nr_new++;
 		if (insert)
-			memblock_insert_region(type, i, base, end - base);
+			memblock_insert_region(type, i, base, end - base,
+					       MAX_NUMNODES);
 	}
 
 	/*
@@ -459,6 +461,100 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 	return memblock_add_region(_rgn, base, size);
 }
 
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+/*
+ * Common iterator interface used to define for_each_mem_range().
+ */
+void __init_memblock __next_mem_pfn_range(int *idx, int nid,
+				unsigned long *out_start_pfn,
+				unsigned long *out_end_pfn, int *out_nid)
+{
+	struct memblock_type *type = &memblock.memory;
+	struct memblock_region *r;
+
+	while (++*idx < type->cnt) {
+		r = &type->regions[*idx];
+
+		if (PFN_UP(r->base) >= PFN_DOWN(r->base + r->size))
+			continue;
+		if (nid == MAX_NUMNODES || nid == r->nid)
+			break;
+	}
+	if (*idx >= type->cnt) {
+		*idx = -1;
+		return;
+	}
+
+	if (out_start_pfn)
+		*out_start_pfn = PFN_UP(r->base);
+	if (out_end_pfn)
+		*out_end_pfn = PFN_DOWN(r->base + r->size);
+	if (out_nid)
+		*out_nid = r->nid;
+}
+
+/**
+ * memblock_set_node - set node ID on memblock regions
+ * @base: base of area to set node ID for
+ * @size: size of area to set node ID for
+ * @nid: node ID to set
+ *
+ * Set the nid of memblock memory regions in [@base,@base+@size) to @nid.
+ * Regions which cross the area boundaries are split as necessary.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid)
+{
+	struct memblock_type *type = &memblock.memory;
+	phys_addr_t end = base + size;
+	int i;
+
+	/* we'll create at most two more regions */
+	while (type->cnt + 2 > type->max)
+		if (memblock_double_array(type) < 0)
+			return -ENOMEM;
+
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		phys_addr_t rbase = rgn->base;
+		phys_addr_t rend = rbase + rgn->size;
+
+		if (rbase >= end)
+			break;
+		if (rend <= base)
+			continue;
+
+		if (rbase < base) {
+			/*
+			 * @rgn intersects from below.  Split and continue
+			 * to process the next region - the new top half.
+			 */
+			rgn->base = base;
+			rgn->size = rend - rgn->base;
+			memblock_insert_region(type, i, rbase, base - rbase,
+					       rgn->nid);
+		} else if (rend > end) {
+			/*
+			 * @rgn intersects from above.  Split and redo the
+			 * current region - the new bottom half.
+			 */
+			rgn->base = end;
+			rgn->size = rend - rgn->base;
+			memblock_insert_region(type, i--, rbase, end - rbase,
+					       rgn->nid);
+		} else {
+			/* @rgn is fully contained, set ->nid */
+			rgn->nid = nid;
+		}
+	}
+
+	memblock_merge_regions(type);
+	return 0;
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
 phys_addr_t __init __memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr)
 {
 	phys_addr_t found;
@@ -689,19 +785,26 @@ void __init_memblock memblock_set_current_limit(phys_addr_t limit)
 	memblock.current_limit = limit;
 }
 
-static void __init_memblock memblock_dump(struct memblock_type *region, char *name)
+static void __init_memblock memblock_dump(struct memblock_type *type, char *name)
 {
 	unsigned long long base, size;
 	int i;
 
-	pr_info(" %s.cnt  = 0x%lx\n", name, region->cnt);
-
-	for (i = 0; i < region->cnt; i++) {
-		base = region->regions[i].base;
-		size = region->regions[i].size;
+	pr_info(" %s.cnt  = 0x%lx\n", name, type->cnt);
 
-		pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes\n",
-		    name, i, base, base + size - 1, size);
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		char nid_buf[32] = "";
+
+		base = rgn->base;
+		size = rgn->size;
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+		if (memblock_get_region_node(rgn) != MAX_NUMNODES)
+			snprintf(nid_buf, sizeof(nid_buf), " on node %d",
+				 memblock_get_region_node(rgn));
+#endif
+		pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes%s\n",
+			name, i, base, base + size - 1, size, nid_buf);
 	}
 }
 
@@ -759,11 +862,13 @@ void __init memblock_init(void)
 	 */
 	memblock.memory.regions[0].base = 0;
 	memblock.memory.regions[0].size = 0;
+	memblock_set_region_node(&memblock.memory.regions[0], MAX_NUMNODES);
 	memblock.memory.cnt = 1;
 
 	/* Ditto. */
 	memblock.reserved.regions[0].base = 0;
 	memblock.reserved.regions[0].size = 0;
+	memblock_set_region_node(&memblock.reserved.regions[0], MAX_NUMNODES);
 	memblock.reserved.cnt = 1;
 
 	memblock.current_limit = MEMBLOCK_ALLOC_ANYWHERE;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8ab5e5e..3c7ea45 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -182,28 +182,31 @@ static unsigned long __meminitdata nr_all_pages;
 static unsigned long __meminitdata dma_reserve;
 
 #ifdef CONFIG_ARCH_POPULATES_NODE_MAP
-  /*
-   * MAX_ACTIVE_REGIONS determines the maximum number of distinct
-   * ranges of memory (RAM) that may be registered with add_active_range().
-   * Ranges passed to add_active_range() will be merged if possible
-   * so the number of times add_active_range() can be called is
-   * related to the number of nodes and the number of holes
-   */
-  #ifdef CONFIG_MAX_ACTIVE_REGIONS
-    /* Allow an architecture to set MAX_ACTIVE_REGIONS to save memory */
-    #define MAX_ACTIVE_REGIONS CONFIG_MAX_ACTIVE_REGIONS
-  #else
-    #if MAX_NUMNODES >= 32
-      /* If there can be many nodes, allow up to 50 holes per node */
-      #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
+  #ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+    /*
+     * MAX_ACTIVE_REGIONS determines the maximum number of distinct ranges
+     * of memory (RAM) that may be registered with add_active_range().
+     * Ranges passed to add_active_range() will be merged if possible so
+     * the number of times add_active_range() can be called is related to
+     * the number of nodes and the number of holes
+     */
+    #ifdef CONFIG_MAX_ACTIVE_REGIONS
+      /* Allow an architecture to set MAX_ACTIVE_REGIONS to save memory */
+      #define MAX_ACTIVE_REGIONS CONFIG_MAX_ACTIVE_REGIONS
     #else
-      /* By default, allow up to 256 distinct regions */
-      #define MAX_ACTIVE_REGIONS 256
+      #if MAX_NUMNODES >= 32
+        /* If there can be many nodes, allow up to 50 holes per node */
+        #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
+      #else
+        /* By default, allow up to 256 distinct regions */
+        #define MAX_ACTIVE_REGIONS 256
+      #endif
     #endif
-  #endif
 
-  static struct node_active_region __meminitdata early_node_map[MAX_ACTIVE_REGIONS];
-  static int __meminitdata nr_nodemap_entries;
+    static struct node_active_region __meminitdata early_node_map[MAX_ACTIVE_REGIONS];
+    static int __meminitdata nr_nodemap_entries;
+#endif /* !CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
   static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
   static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
   static unsigned long __initdata required_kernelcore;
@@ -4268,6 +4271,7 @@ static inline void setup_nr_node_ids(void)
 }
 #endif
 
+#ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 /*
  * Common iterator interface used to define for_each_mem_pfn_range().
  */
@@ -4456,6 +4460,11 @@ void __init sort_node_map(void)
 			sizeof(struct node_active_region),
 			cmp_node_active_region, NULL);
 }
+#else /* !CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+static inline void sort_node_map(void)
+{
+}
+#endif
 
 /**
  * node_map_pfn_alignment - determine the maximum internode alignment
-- 
1.7.6

[PATCH 04/13] x86: Use HAVE_MEMBLOCK_NODE_MAP

[Tejun Heo]

Convert x86 to HAVE_MEMBLOCK_NODE_MAP.  The only difference in memory
handling is that allocations can't no longer cross node boundaries
whether they're node affine or not, which shouldn't matter at all.

This conversion will enable further simplification of boot memory
handling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/Kconfig                |    1 +
 arch/x86/include/asm/memblock.h |    2 --
 arch/x86/mm/memblock.c          |   14 --------------
 arch/x86/mm/numa.c              |   15 +++++++--------
 4 files changed, 8 insertions(+), 24 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 37357a5..91aa1b4e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -25,6 +25,7 @@ config X86
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 161792e..1460db2 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -12,8 +12,6 @@ int __get_free_all_memory_range(struct range **range, int nodeid,
 			 unsigned long start_pfn, unsigned long end_pfn);
 int get_free_all_memory_range(struct range **rangep, int nodeid);
 
-void memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn);
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
 u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index e4569f8..97fbc39 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -283,20 +283,6 @@ static int __init memblock_x86_find_active_region(const struct memblock_region *
 	return 1;
 }
 
-/* Walk the memblock.memory map and register active regions within a node */
-void __init memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn)
-{
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r)
-		if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
-					   &ei_startpfn, &ei_endpfn))
-			add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
 /*
  * Find the hole size (in bytes) in the memory range.
  * @start: starting address of the memory range to scan
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 824efad..f4a40bd 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -498,13 +498,10 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 	if (WARN_ON(nodes_empty(node_possible_map)))
 		return -EINVAL;
 
-	for (i = 0; i < mi->nr_blks; i++)
-		memblock_x86_register_active_regions(mi->blk[i].nid,
-					mi->blk[i].start >> PAGE_SHIFT,
-					mi->blk[i].end >> PAGE_SHIFT);
-
-	/* for out of order entries */
-	sort_node_map();
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *mb = &mi->blk[i];
+		memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
+	}
 
 	/*
 	 * If sections array is gonna be used for pfn -> nid mapping, check
@@ -538,6 +535,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			setup_node_data(nid, start, end);
 	}
 
+	/* Dump memblock with node info and return. */
+	memblock_dump_all();
 	return 0;
 }
 
@@ -575,7 +574,7 @@ static int __init numa_init(int (*init_func)(void))
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	remove_all_active_ranges();
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
 	numa_reset_distance();
 
 	ret = init_func();
-- 
1.7.6

[PATCH 05/13] x86: Use __memblock_alloc_base() in early_reserve_e820()

[Tejun Heo]

early_reserve_e820() implements its own ad-hoc early allocator using
memblock_x86_find_in_range_size().  Use __memblock_alloc_base()
instead and remove the unnecessary @startt parameter (it's top-down
allocation anyway).

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/include/asm/e820.h |    2 +-
 arch/x86/kernel/e820.c      |   30 ++++++------------------------
 arch/x86/kernel/mpparse.c   |    6 ++----
 3 files changed, 9 insertions(+), 29 deletions(-)

diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 908b969..3778256 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -117,7 +117,7 @@ static inline void early_memtest(unsigned long start, unsigned long end)
 
 extern unsigned long e820_end_of_ram_pfn(void);
 extern unsigned long e820_end_of_low_ram_pfn(void);
-extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+extern u64 early_reserve_e820(u64 sizet, u64 align);
 
 void memblock_x86_fill(void);
 void memblock_find_dma_reserve(void);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 0f9ff58..b99d940 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -737,35 +737,17 @@ core_initcall(e820_mark_nvs_memory);
 /*
  * pre allocated 4k and reserved it in memblock and e820_saved
  */
-u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
+u64 __init early_reserve_e820(u64 size, u64 align)
 {
-	u64 size = 0;
 	u64 addr;
-	u64 start;
 
-	for (start = startt; ; start += size) {
-		start = memblock_x86_find_in_range_size(start, &size, align);
-		if (!start)
-			return 0;
-		if (size >= sizet)
-			break;
+	addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
+	if (addr) {
+		e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED);
+		printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
+		update_e820_saved();
 	}
 
-#ifdef CONFIG_X86_32
-	if (start >= MAXMEM)
-		return 0;
-	if (start + size > MAXMEM)
-		size = MAXMEM - start;
-#endif
-
-	addr = round_down(start + size - sizet, align);
-	if (addr < start)
-		return 0;
-	memblock_x86_reserve_range(addr, addr + sizet, "new next");
-	e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
-	printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
-	update_e820_saved();
-
 	return addr;
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 9103b89..8faeaa0 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -836,10 +836,8 @@ early_param("alloc_mptable", parse_alloc_mptable_opt);
 
 void __init early_reserve_e820_mpc_new(void)
 {
-	if (enable_update_mptable && alloc_mptable) {
-		u64 startt = 0;
-		mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
-	}
+	if (enable_update_mptable && alloc_mptable)
+		mpc_new_phys = early_reserve_e820(mpc_new_length, 4);
 }
 
 static int __init update_mp_table(void)
-- 
1.7.6

[PATCH 06/13] memblock: Implement for_each_free_mem_range()

[Tejun Heo]

Implement for_each_free_mem_range() which iterates over free memory
areas according to memblock (memory && !reserved).  This will be used
to simplify memblock users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/linux/memblock.h |   20 ++++++++++++
 mm/memblock.c            |   76 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 96 insertions(+), 0 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index e78a9ad..013dfe0 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -61,6 +61,26 @@ extern long memblock_remove(phys_addr_t base, phys_addr_t size);
 extern long memblock_free(phys_addr_t base, phys_addr_t size);
 extern long memblock_reserve(phys_addr_t base, phys_addr_t size);
 
+extern void __next_free_mem_range(u64 *idx, int nid, phys_addr_t *out_start,
+				  phys_addr_t *out_end, int *out_nid);
+
+/**
+ * for_each_free_mem_range - iterate through free memblock areas
+ * @i: u64 used as loop variable
+ * @nid: node selector, %MAX_NUMNODES for all nodes
+ * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @p_nid: ptr to int for nid of the range, can be %NULL
+ *
+ * Walks over free (memory && !reserved) areas of memblock.  Available as
+ * soon as memblock is initialized.
+ */
+#define for_each_free_mem_range(i, nid, p_start, p_end, p_nid)		\
+	for (i = 0,							\
+	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid);	\
+	     i != (u64)ULLONG_MAX;					\
+	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid))
+
 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 extern int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid);
 
diff --git a/mm/memblock.c b/mm/memblock.c
index 766adec..4d318bf 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -461,6 +461,82 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 	return memblock_add_region(_rgn, base, size);
 }
 
+/**
+ * __next_free_mem_range - next function for for_each_free_mem_range()
+ * @idx: pointer to u64 loop variable
+ * @nid: nid: node selector, %MAX_NUMNODES for all nodes
+ * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @p_nid: ptr to int for nid of the range, can be %NULL
+ *
+ * Find the first free area from *@idx which matches @nid, fill the out
+ * parameters, and update *@idx for the next iteration.  The lower 32bit of
+ * *@idx contains index into memory region and the upper 32bit indexes the
+ * areas before each reserved region.  For example, if reserved regions
+ * look like the following,
+ *
+ *	0:[0-16), 1:[32-48), 2:[128-130)
+ *
+ * The upper 32bit indexes the following regions.
+ *
+ *	0:[0-0), 1:[16-32), 2:[48-128), 3:[130-MAX)
+ *
+ * As both region arrays are sorted, the function advances the two indices
+ * in lockstep and returns each intersection.
+ */
+void __init_memblock __next_free_mem_range(u64 *idx, int nid,
+					   phys_addr_t *out_start,
+					   phys_addr_t *out_end, int *out_nid)
+{
+	struct memblock_type *mem = &memblock.memory;
+	struct memblock_type *rsv = &memblock.reserved;
+	int mi = *idx & 0xffffffff;
+	int ri = *idx >> 32;
+
+	for ( ; mi < mem->cnt; mi++) {
+		struct memblock_region *m = &mem->regions[mi];
+		phys_addr_t m_start = m->base;
+		phys_addr_t m_end = m->base + m->size;
+
+		/* only memory regions are associated with nodes, check it */
+		if (nid != MAX_NUMNODES && nid != memblock_get_region_node(m))
+			continue;
+
+		/* scan areas before each reservation for intersection */
+		for ( ; ri < rsv->cnt + 1; ri++) {
+			struct memblock_region *r = &rsv->regions[ri];
+			phys_addr_t r_start = ri ? r[-1].base + r[-1].size : 0;
+			phys_addr_t r_end = ri < rsv->cnt ? r->base : ULLONG_MAX;
+
+			/* if ri advanced past mi, break out to advance mi */
+			if (r_start >= m_end)
+				break;
+			/* if the two regions intersect, we're done */
+			if (m_start < r_end) {
+				if (out_start)
+					*out_start = max(m_start, r_start);
+				if (out_end)
+					*out_end = min(m_end, r_end);
+				if (out_nid)
+					*out_nid = memblock_get_region_node(m);
+				/*
+				 * The region which ends first is advanced
+				 * for the next iteration.
+				 */
+				if (m_end <= r_end)
+					mi++;
+				else
+					ri++;
+				*idx = (u32)mi | (u64)ri << 32;
+				return;
+			}
+		}
+	}
+
+	/* signal end of iteration */
+	*idx = ULLONG_MAX;
+}
+
 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 /*
  * Common iterator interface used to define for_each_mem_range().
-- 
1.7.6

[PATCH 07/13] x86: Replace memblock_x86_find_in_range_size() with for_each_free_mem_range()

[Tejun Heo]

setup_bios_corruption_check() and memtest do_one_pass() open code
memblock free area iteration using memblock_x86_find_in_range_size().
Convert them to use for_each_free_mem_range() instead.

This leaves memblock_x86_find_in_range_size() and
memblock_x86_check_reserved_size() unused.  Kill them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/include/asm/memblock.h |    3 --
 arch/x86/kernel/check.c         |   34 +++++++++------------
 arch/x86/mm/memblock.c          |   62 ---------------------------------------
 arch/x86/mm/memtest.c           |   31 ++++++++-----------
 4 files changed, 28 insertions(+), 102 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 1460db2..d2a5a59 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -3,8 +3,6 @@
 
 #define ARCH_DISCARD_MEMBLOCK
 
-u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align);
-
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 struct range;
@@ -15,6 +13,5 @@ int get_free_all_memory_range(struct range **rangep, int nodeid);
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
 u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
-bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align);
 
 #endif
diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index 95680fc..621cd23 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -62,7 +62,8 @@ early_param("memory_corruption_check_size", set_corruption_check_size);
 
 void __init setup_bios_corruption_check(void)
 {
-	u64 addr = PAGE_SIZE;	/* assume first page is reserved anyway */
+	phys_addr_t start, end;
+	u64 i;
 
 	if (memory_corruption_check == -1) {
 		memory_corruption_check =
@@ -82,28 +83,23 @@ void __init setup_bios_corruption_check(void)
 
 	corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
 
-	while (addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
-		u64 size;
-		addr = memblock_x86_find_in_range_size(addr, &size, PAGE_SIZE);
+	for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
+		start = clamp_t(phys_addr_t, round_up(start, PAGE_SIZE),
+				PAGE_SIZE, corruption_check_size);
+		end = clamp_t(phys_addr_t, round_down(end, PAGE_SIZE),
+			      PAGE_SIZE, corruption_check_size);
+		if (start >= end)
+			continue;
 
-		if (!addr)
-			break;
-
-		if (addr >= corruption_check_size)
-			break;
-
-		if ((addr + size) > corruption_check_size)
-			size = corruption_check_size - addr;
-
-		memblock_x86_reserve_range(addr, addr + size, "SCAN RAM");
-		scan_areas[num_scan_areas].addr = addr;
-		scan_areas[num_scan_areas].size = size;
-		num_scan_areas++;
+		memblock_x86_reserve_range(start, end, "SCAN RAM");
+		scan_areas[num_scan_areas].addr = start;
+		scan_areas[num_scan_areas].size = end - start;
 
 		/* Assume we've already mapped this early memory */
-		memset(__va(addr), 0, size);
+		memset(__va(start), 0, end - start);
 
-		addr += size;
+		if (++num_scan_areas >= MAX_SCAN_AREAS)
+			break;
 	}
 
 	if (num_scan_areas)
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 97fbc39..648d47d 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -7,68 +7,6 @@
 #include <linux/mm.h>
 #include <linux/range.h>
 
-/* Check for already reserved areas */
-bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align)
-{
-	struct memblock_region *r;
-	u64 addr = *addrp, last;
-	u64 size = *sizep;
-	bool changed = false;
-
-again:
-	last = addr + size;
-	for_each_memblock(reserved, r) {
-		if (last > r->base && addr < r->base) {
-			size = r->base - addr;
-			changed = true;
-			goto again;
-		}
-		if (last > (r->base + r->size) && addr < (r->base + r->size)) {
-			addr = round_up(r->base + r->size, align);
-			size = last - addr;
-			changed = true;
-			goto again;
-		}
-		if (last <= (r->base + r->size) && addr >= r->base) {
-			*sizep = 0;
-			return false;
-		}
-	}
-	if (changed) {
-		*addrp = addr;
-		*sizep = size;
-	}
-	return changed;
-}
-
-/*
- * Find next free range after start, and size is returned in *sizep
- */
-u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align)
-{
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r) {
-		u64 ei_start = r->base;
-		u64 ei_last = ei_start + r->size;
-		u64 addr;
-
-		addr = round_up(ei_start, align);
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		*sizep = ei_last - addr;
-		while (memblock_x86_check_reserved_size(&addr, sizep, align))
-			;
-
-		if (*sizep)
-			return addr;
-	}
-
-	return 0;
-}
-
 static __init struct range *find_range_array(int count)
 {
 	u64 end, size, mem;
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 92faf3a..46a5ff2 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -70,24 +70,19 @@ static void __init memtest(u64 pattern, u64 start_phys, u64 size)
 
 static void __init do_one_pass(u64 pattern, u64 start, u64 end)
 {
-	u64 size = 0;
-
-	while (start < end) {
-		start = memblock_x86_find_in_range_size(start, &size, 1);
-
-		/* done ? */
-		if (start >= end)
-			break;
-		if (start + size > end)
-			size = end - start;
-
-		printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
-		       (unsigned long long) start,
-		       (unsigned long long) start + size,
-		       (unsigned long long) cpu_to_be64(pattern));
-		memtest(pattern, start, size);
-
-		start += size;
+	u64 i;
+	phys_addr_t this_start, this_end;
+
+	for_each_free_mem_range(i, MAX_NUMNODES, &this_start, &this_end, NULL) {
+		this_start = clamp_t(phys_addr_t, this_start, start, end);
+		this_end = clamp_t(phys_addr_t, this_end, start, end);
+		if (this_start < this_end) {
+			printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
+			       (unsigned long long)this_start,
+			       (unsigned long long)this_end,
+			       (unsigned long long)cpu_to_be64(pattern));
+			memtest(pattern, this_start, this_end - this_start);
+		}
 	}
 }
 
-- 
1.7.6

[PATCH 08/13] memblock, x86: Make free_all_memory_core_early() explicitly free lowmem only

[Tejun Heo]

nomemblock is currently used only by x86 and on x86_32
free_all_memory_core_early() silently freed only the low mem because
get_free_all_memory_range() in arch/x86/mm/memblock.c implicitly
limited range to max_low_pfn.

Rename free_all_memory_core_early() to free_low_memory_core_early()
and make it call __get_free_all_memory_range() and limit the range to
max_low_pfn explicitly.  This makes things clearer and also is
consistent with the bootmem behavior.

This leaves get_free_all_memory_range() without any user.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/include/asm/memblock.h |    1 -
 arch/x86/mm/memblock.c          |   10 ----------
 arch/x86/mm/numa_64.c           |    2 +-
 include/linux/bootmem.h         |    2 +-
 mm/nobootmem.c                  |    8 ++++----
 5 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index d2a5a59..6c72eca 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -8,7 +8,6 @@ void memblock_x86_free_range(u64 start, u64 end);
 struct range;
 int __get_free_all_memory_range(struct range **range, int nodeid,
 			 unsigned long start_pfn, unsigned long end_pfn);
-int get_free_all_memory_range(struct range **rangep, int nodeid);
 
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 648d47d..0e8442a 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -89,16 +89,6 @@ int __init __get_free_all_memory_range(struct range **rangep, int nodeid,
 	return nr_range;
 }
 
-int __init get_free_all_memory_range(struct range **rangep, int nodeid)
-{
-	unsigned long end_pfn = -1UL;
-
-#ifdef CONFIG_X86_32
-	end_pfn = max_low_pfn;
-#endif
-	return __get_free_all_memory_range(rangep, nodeid, 0, end_pfn);
-}
-
 static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
 {
 	int i, count;
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index dd27f40..92e2711 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -19,7 +19,7 @@ unsigned long __init numa_free_all_bootmem(void)
 	for_each_online_node(i)
 		pages += free_all_bootmem_node(NODE_DATA(i));
 
-	pages += free_all_memory_core_early(MAX_NUMNODES);
+	pages += free_low_memory_core_early(MAX_NUMNODES);
 
 	return pages;
 }
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index ab344a5..66d3e95 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -44,7 +44,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat,
 				       unsigned long endpfn);
 extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
 
-unsigned long free_all_memory_core_early(int nodeid);
+extern unsigned long free_low_memory_core_early(int nodeid);
 extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
 extern unsigned long free_all_bootmem(void);
 
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index c781626..2037a8a 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -106,7 +106,7 @@ static void __init __free_pages_memory(unsigned long start, unsigned long end)
 		__free_pages_bootmem(pfn_to_page(i), 0);
 }
 
-unsigned long __init free_all_memory_core_early(int nodeid)
+unsigned long __init free_low_memory_core_early(int nodeid)
 {
 	int i;
 	u64 start, end;
@@ -114,7 +114,7 @@ unsigned long __init free_all_memory_core_early(int nodeid)
 	struct range *range = NULL;
 	int nr_range;
 
-	nr_range = get_free_all_memory_range(&range, nodeid);
+	nr_range = __get_free_all_memory_range(&range, nodeid, 0, max_low_pfn);
 
 	for (i = 0; i < nr_range; i++) {
 		start = range[i].start;
@@ -136,7 +136,7 @@ unsigned long __init free_all_bootmem_node(pg_data_t *pgdat)
 {
 	register_page_bootmem_info_node(pgdat);
 
-	/* free_all_memory_core_early(MAX_NUMNODES) will be called later */
+	/* free_low_memory_core_early(MAX_NUMNODES) will be called later */
 	return 0;
 }
 
@@ -154,7 +154,7 @@ unsigned long __init free_all_bootmem(void)
 	 * Use MAX_NUMNODES will make sure all ranges in early_node_map[]
 	 *  will be used instead of only Node0 related
 	 */
-	return free_all_memory_core_early(MAX_NUMNODES);
+	return free_low_memory_core_early(MAX_NUMNODES);
 }
 
 /**
-- 
1.7.6

[PATCH 09/13] memblock, x86: Replace __get_free_all_memory_range() with for_each_free_mem_range()

[Tejun Heo]

__get_free_all_memory_range() walks memblock, calculates free memory
areas and fills in the specified range.  It can be easily replaced
with for_each_free_mem_range().

Convert free_low_memory_core_early() and
add_highpages_with_active_regions() to for_each_free_mem_range().
This leaves __get_free_all_memory_range() without any user.  Kill it
and related functions.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/include/asm/memblock.h |    3 --
 arch/x86/mm/init_32.c           |   28 +++++++-----------
 arch/x86/mm/memblock.c          |   59 ---------------------------------------
 mm/nobootmem.c                  |   28 ++++++++++--------
 4 files changed, 27 insertions(+), 91 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 6c72eca..bc9e44b 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -5,9 +5,6 @@
 
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
-struct range;
-int __get_free_all_memory_range(struct range **range, int nodeid,
-			 unsigned long start_pfn, unsigned long end_pfn);
 
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 29f7c6d..a631a57 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -427,23 +427,17 @@ static void __init add_one_highpage_init(struct page *page)
 void __init add_highpages_with_active_regions(int nid,
 			 unsigned long start_pfn, unsigned long end_pfn)
 {
-	struct range *range;
-	int nr_range;
-	int i;
-
-	nr_range = __get_free_all_memory_range(&range, nid, start_pfn, end_pfn);
-
-	for (i = 0; i < nr_range; i++) {
-		struct page *page;
-		int node_pfn;
-
-		for (node_pfn = range[i].start; node_pfn < range[i].end;
-		     node_pfn++) {
-			if (!pfn_valid(node_pfn))
-				continue;
-			page = pfn_to_page(node_pfn);
-			add_one_highpage_init(page);
-		}
+	phys_addr_t start, end;
+	u64 i;
+
+	for_each_free_mem_range(i, nid, &start, &end, NULL) {
+		unsigned long pfn = clamp_t(unsigned long, PFN_UP(start),
+					    start_pfn, end_pfn);
+		unsigned long e_pfn = clamp_t(unsigned long, PFN_DOWN(end),
+					      start_pfn, end_pfn);
+		for ( ; pfn < e_pfn; pfn++)
+			if (pfn_valid(pfn))
+				add_one_highpage_init(pfn_to_page(pfn));
 	}
 }
 #else
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 0e8442a..4107c1a 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -30,65 +30,6 @@ static __init struct range *find_range_array(int count)
 	return range;
 }
 
-static void __init memblock_x86_subtract_reserved(struct range *range, int az)
-{
-	u64 final_start, final_end;
-	struct memblock_region *r;
-
-	/* Take out region array itself at first*/
-	memblock_free_reserved_regions();
-
-	memblock_dbg("Subtract (%ld early reservations)\n", memblock.reserved.cnt);
-
-	for_each_memblock(reserved, r) {
-		memblock_dbg("  [%010llx-%010llx]\n", (u64)r->base, (u64)r->base + r->size - 1);
-		final_start = PFN_DOWN(r->base);
-		final_end = PFN_UP(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		subtract_range(range, az, final_start, final_end);
-	}
-
-	/* Put region array back ? */
-	memblock_reserve_reserved_regions();
-}
-
-static int __init count_early_node_map(int nodeid)
-{
-	int i, cnt = 0;
-
-	for_each_mem_pfn_range(i, nodeid, NULL, NULL, NULL)
-		cnt++;
-	return cnt;
-}
-
-int __init __get_free_all_memory_range(struct range **rangep, int nodeid,
-			 unsigned long start_pfn, unsigned long end_pfn)
-{
-	int count;
-	struct range *range;
-	int nr_range;
-
-	count = (memblock.reserved.cnt + count_early_node_map(nodeid)) * 2;
-
-	range = find_range_array(count);
-	nr_range = 0;
-
-	/*
-	 * Use early_node_map[] and memblock.reserved.region to get range array
-	 * at first
-	 */
-	nr_range = add_from_early_node_map(range, count, nr_range, nodeid);
-	subtract_range(range, count, 0, start_pfn);
-	subtract_range(range, count, end_pfn, -1ULL);
-
-	memblock_x86_subtract_reserved(range, count);
-	nr_range = clean_sort_range(range, count);
-
-	*rangep = range;
-	return nr_range;
-}
-
 static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
 {
 	int i, count;
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 2037a8a..7075bc0 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -108,21 +108,25 @@ static void __init __free_pages_memory(unsigned long start, unsigned long end)
 
 unsigned long __init free_low_memory_core_early(int nodeid)
 {
-	int i;
-	u64 start, end;
 	unsigned long count = 0;
-	struct range *range = NULL;
-	int nr_range;
-
-	nr_range = __get_free_all_memory_range(&range, nodeid, 0, max_low_pfn);
-
-	for (i = 0; i < nr_range; i++) {
-		start = range[i].start;
-		end = range[i].end;
-		count += end - start;
-		__free_pages_memory(start, end);
+	phys_addr_t start, end;
+	u64 i;
+
+	/* free reserved array temporarily so that it's treated as free area */
+	memblock_free_reserved_regions();
+
+	for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
+		unsigned long start_pfn = PFN_UP(start);
+		unsigned long end_pfn = min_t(unsigned long,
+					      PFN_DOWN(end), max_low_pfn);
+		if (start_pfn < end_pfn) {
+			__free_pages_memory(start_pfn, end_pfn);
+			count += end_pfn - start_pfn;
+		}
 	}
 
+	/* put region array back? */
+	memblock_reserve_reserved_regions();
 	return count;
 }
 
-- 
1.7.6

[PATCH 10/13] memblock, x86: Reimplement memblock_find_dma_reserve() using iterators

[Tejun Heo]

memblock_find_dma_reserve() wants to find out how much memory is
reserved under MAX_DMA_PFN.  memblock_x86_memory_[free_]in_range() are
used to find out the amounts of all available and free memory in the
area, which are then subtracted to find out the amount of reservation.

memblock_x86_memblock_[free_]in_range() are implemented using
__memblock_x86_memory_in_range() which builds ranges from memblock and
then count them, which is rather unnecessarily complex.

This patch open codes the counting logic directly in
memblock_find_dma_reserve() using memblock iterators and removes now
unused __memblock_x86_memory_in_range() and find_range_array().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/include/asm/memblock.h |    2 -
 arch/x86/kernel/e820.c          |   25 +++++++++--
 arch/x86/mm/memblock.c          |   87 ---------------------------------------
 3 files changed, 20 insertions(+), 94 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index bc9e44b..a0cc7d6 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -7,7 +7,5 @@ void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 
 u64 memblock_x86_hole_size(u64 start, u64 end);
-u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
-u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
 
 #endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index b99d940..84475f1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1093,15 +1093,30 @@ void __init memblock_x86_fill(void)
 void __init memblock_find_dma_reserve(void)
 {
 #ifdef CONFIG_X86_64
-	u64 free_size_pfn;
-	u64 mem_size_pfn;
+	u64 nr_pages = 0, nr_free_pages = 0;
+	unsigned long start_pfn, end_pfn;
+	phys_addr_t start, end;
+	int i;
+	u64 u;
+
 	/*
 	 * need to find out used area below MAX_DMA_PFN
 	 * need to use memblock to get free size in [0, MAX_DMA_PFN]
 	 * at first, and assume boot_mem will not take below MAX_DMA_PFN
 	 */
-	mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
-	free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
-	set_dma_reserve(mem_size_pfn - free_size_pfn);
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
+		start_pfn = min_t(unsigned long, start_pfn, MAX_DMA_PFN);
+		end_pfn = min_t(unsigned long, end_pfn, MAX_DMA_PFN);
+		nr_pages += end_pfn - start_pfn;
+	}
+
+	for_each_free_mem_range(u, MAX_NUMNODES, &start, &end, NULL) {
+		start_pfn = min_t(unsigned long, PFN_UP(start), MAX_DMA_PFN);
+		end_pfn = min_t(unsigned long, PFN_DOWN(end), MAX_DMA_PFN);
+		if (start_pfn < end_pfn)
+			nr_free_pages += end_pfn - start_pfn;
+	}
+
+	set_dma_reserve(nr_pages - nr_free_pages);
 #endif
 }
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 4107c1a..a9d0972 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -7,93 +7,6 @@
 #include <linux/mm.h>
 #include <linux/range.h>
 
-static __init struct range *find_range_array(int count)
-{
-	u64 end, size, mem;
-	struct range *range;
-
-	size = sizeof(struct range) * count;
-	end = memblock.current_limit;
-
-	mem = memblock_find_in_range(0, end, size, sizeof(struct range));
-	if (!mem)
-		panic("can not find more space for range array");
-
-	/*
-	 * This range is tempoaray, so don't reserve it, it will not be
-	 * overlapped because We will not alloccate new buffer before
-	 * We discard this one
-	 */
-	range = __va(mem);
-	memset(range, 0, size);
-
-	return range;
-}
-
-static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
-{
-	int i, count;
-	struct range *range;
-	int nr_range;
-	u64 final_start, final_end;
-	u64 free_size;
-	struct memblock_region *r;
-
-	count = (memblock.reserved.cnt + memblock.memory.cnt) * 2;
-
-	range = find_range_array(count);
-	nr_range = 0;
-
-	addr = PFN_UP(addr);
-	limit = PFN_DOWN(limit);
-
-	for_each_memblock(memory, r) {
-		final_start = PFN_UP(r->base);
-		final_end = PFN_DOWN(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		if (final_start >= limit || final_end <= addr)
-			continue;
-
-		nr_range = add_range(range, count, nr_range, final_start, final_end);
-	}
-	subtract_range(range, count, 0, addr);
-	subtract_range(range, count, limit, -1ULL);
-
-	/* Subtract memblock.reserved.region in range ? */
-	if (!get_free)
-		goto sort_and_count_them;
-	for_each_memblock(reserved, r) {
-		final_start = PFN_DOWN(r->base);
-		final_end = PFN_UP(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		if (final_start >= limit || final_end <= addr)
-			continue;
-
-		subtract_range(range, count, final_start, final_end);
-	}
-
-sort_and_count_them:
-	nr_range = clean_sort_range(range, count);
-
-	free_size = 0;
-	for (i = 0; i < nr_range; i++)
-		free_size += range[i].end - range[i].start;
-
-	return free_size << PAGE_SHIFT;
-}
-
-u64 __init memblock_x86_free_memory_in_range(u64 addr, u64 limit)
-{
-	return __memblock_x86_memory_in_range(addr, limit, true);
-}
-
-u64 __init memblock_x86_memory_in_range(u64 addr, u64 limit)
-{
-	return __memblock_x86_memory_in_range(addr, limit, false);
-}
-
 void __init memblock_x86_reserve_range(u64 start, u64 end, char *name)
 {
 	if (start == end)
-- 
1.7.6

[PATCH 11/13] x86: Use absent_pages_in_range() instead of memblock_x86_hole_size()

[Tejun Heo]

memblock_x86_hole_size() calculates the total size of holes in a given
range according to memblock and is used by numa emulation code and
numa_meminfo_cover_memory().

Since conversion to MEMBLOCK_NODE_MAP, absent_pages_in_range() also
uses memblock and gives the same result.  This patch replaces
memblock_x86_hole_size() uses with absent_pages_in_range().  After the
conversion the x86 function doesn't have any user left and is killed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/include/asm/memblock.h |    2 -
 arch/x86/mm/memblock.c          |   52 ---------------------------------------
 arch/x86/mm/numa.c              |    4 +-
 arch/x86/mm/numa_emulation.c    |   30 +++++++++++++---------
 4 files changed, 20 insertions(+), 68 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index a0cc7d6..17a882e 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -6,6 +6,4 @@
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 
-u64 memblock_x86_hole_size(u64 start, u64 end);
-
 #endif
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index a9d0972..7325c5d 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -32,55 +32,3 @@ void __init memblock_x86_free_range(u64 start, u64 end)
 
 	memblock_free(start, end - start);
 }
-
-/*
- * Finds an active region in the address range from start_pfn to last_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the memblock entry.
- */
-static int __init memblock_x86_find_active_region(const struct memblock_region *ei,
-				  unsigned long start_pfn,
-				  unsigned long last_pfn,
-				  unsigned long *ei_startpfn,
-				  unsigned long *ei_endpfn)
-{
-	u64 align = PAGE_SIZE;
-
-	*ei_startpfn = round_up(ei->base, align) >> PAGE_SHIFT;
-	*ei_endpfn = round_down(ei->base + ei->size, align) >> PAGE_SHIFT;
-
-	/* Skip map entries smaller than a page */
-	if (*ei_startpfn >= *ei_endpfn)
-		return 0;
-
-	/* Skip if map is outside the node */
-	if (*ei_endpfn <= start_pfn || *ei_startpfn >= last_pfn)
-		return 0;
-
-	/* Check for overlaps */
-	if (*ei_startpfn < start_pfn)
-		*ei_startpfn = start_pfn;
-	if (*ei_endpfn > last_pfn)
-		*ei_endpfn = last_pfn;
-
-	return 1;
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-u64 __init memblock_x86_hole_size(u64 start, u64 end)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long last_pfn = end >> PAGE_SHIFT;
-	unsigned long ei_startpfn, ei_endpfn, ram = 0;
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r)
-		if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
-					   &ei_startpfn, &ei_endpfn))
-			ram += ei_endpfn - ei_startpfn;
-
-	return end - start - ((u64)ram << PAGE_SHIFT);
-}
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index f4a40bd..88e5627 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -475,8 +475,8 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
 			numaram = 0;
 	}
 
-	e820ram = max_pfn - (memblock_x86_hole_size(0,
-					PFN_PHYS(max_pfn)) >> PAGE_SHIFT);
+	e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
+
 	/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
 	if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
 		printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index e3d471c..971fe70 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -28,6 +28,16 @@ static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi)
 	return -ENOENT;
 }
 
+static u64 mem_hole_size(u64 start, u64 end)
+{
+	unsigned long start_pfn = PFN_UP(start);
+	unsigned long end_pfn = PFN_DOWN(end);
+
+	if (start_pfn < end_pfn)
+		return PFN_PHYS(absent_pages_in_range(start_pfn, end_pfn));
+	return 0;
+}
+
 /*
  * Sets up nid to range from @start to @end.  The return value is -errno if
  * something went wrong, 0 otherwise.
@@ -89,7 +99,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 	 * Calculate target node size.  x86_32 freaks on __udivdi3() so do
 	 * the division in ulong number of pages and convert back.
 	 */
-	size = max_addr - addr - memblock_x86_hole_size(addr, max_addr);
+	size = max_addr - addr - mem_hole_size(addr, max_addr);
 	size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes);
 
 	/*
@@ -135,8 +145,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * Continue to add memory to this fake node if its
 			 * non-reserved memory is less than the per-node size.
 			 */
-			while (end - start -
-			       memblock_x86_hole_size(start, end) < size) {
+			while (end - start - mem_hole_size(start, end) < size) {
 				end += FAKE_NODE_MIN_SIZE;
 				if (end > limit) {
 					end = limit;
@@ -150,7 +159,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * this one must extend to the boundary.
 			 */
 			if (end < dma32_end && dma32_end - end -
-			    memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+			    mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
 				end = dma32_end;
 
 			/*
@@ -158,8 +167,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * next node, this one must extend to the end of the
 			 * physical node.
 			 */
-			if (limit - end -
-			    memblock_x86_hole_size(end, limit) < size)
+			if (limit - end - mem_hole_size(end, limit) < size)
 				end = limit;
 
 			ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes,
@@ -180,7 +188,7 @@ static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size)
 {
 	u64 end = start + size;
 
-	while (end - start - memblock_x86_hole_size(start, end) < size) {
+	while (end - start - mem_hole_size(start, end) < size) {
 		end += FAKE_NODE_MIN_SIZE;
 		if (end > max_addr) {
 			end = max_addr;
@@ -211,8 +219,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 	 * creates a uniform distribution of node sizes across the entire
 	 * machine (but not necessarily over physical nodes).
 	 */
-	min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) /
-						MAX_NUMNODES;
+	min_size = (max_addr - addr - mem_hole_size(addr, max_addr)) / MAX_NUMNODES;
 	min_size = max(min_size, FAKE_NODE_MIN_SIZE);
 	if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size)
 		min_size = (min_size + FAKE_NODE_MIN_SIZE) &
@@ -252,7 +259,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 			 * this one must extend to the boundary.
 			 */
 			if (end < dma32_end && dma32_end - end -
-			    memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+			    mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
 				end = dma32_end;
 
 			/*
@@ -260,8 +267,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 			 * next node, this one must extend to the end of the
 			 * physical node.
 			 */
-			if (limit - end -
-			    memblock_x86_hole_size(end, limit) < size)
+			if (limit - end - mem_hole_size(end, limit) < size)
 				end = limit;
 
 			ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES,
-- 
1.7.6

[PATCH 12/13] memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option

[Tejun Heo]

Make ARCH_DISCARD_MEMBLOCK a config option so that it can be handled
together with other MEMBLOCK options.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/Kconfig                |    1 +
 arch/x86/include/asm/memblock.h |    2 --
 include/linux/memblock.h        |    2 +-
 mm/Kconfig                      |    3 +++
 mm/memblock.c                   |    2 +-
 5 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 91aa1b4e..30f4571 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,6 +26,7 @@ config X86
 	select HAVE_KPROBES
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 17a882e..bc56670 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -1,8 +1,6 @@
 #ifndef _X86_MEMBLOCK_H
 #define _X86_MEMBLOCK_H
 
-#define ARCH_DISCARD_MEMBLOCK
-
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 013dfe0..f2611d7 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -197,7 +197,7 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
 	     region++)
 
 
-#ifdef ARCH_DISCARD_MEMBLOCK
+#ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
 #define __init_memblock __init
 #define __initdata_memblock __initdata
 #else
diff --git a/mm/Kconfig b/mm/Kconfig
index 30a5d47..7c56971 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -134,6 +134,9 @@ config HAVE_MEMBLOCK
 config HAVE_MEMBLOCK_NODE_MAP
 	boolean
 
+config ARCH_DISCARD_MEMBLOCK
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/memblock.c b/mm/memblock.c
index 4d318bf..8971d06 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -958,7 +958,7 @@ static int __init early_memblock(char *p)
 }
 early_param("memblock", early_memblock);
 
-#if defined(CONFIG_DEBUG_FS) && !defined(ARCH_DISCARD_MEMBLOCK)
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_ARCH_DISCARD_MEMBLOCK)
 
 static int memblock_debug_show(struct seq_file *m, void *private)
 {
-- 
1.7.6

[PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Tejun Heo]

Other than sanity check and debug message, the x86 specific version of
memblock reserve/free functions are simple wrappers around the generic
versions - memblock_reserve/free().

This patch adds debug messages with caller identification to the
generic versions and replaces x86 specific ones and kills them.
arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty
after this change and removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/include/asm/memblock.h |    7 -------
 arch/x86/kernel/aperture_64.c   |    2 +-
 arch/x86/kernel/check.c         |    2 +-
 arch/x86/kernel/head.c          |    2 +-
 arch/x86/kernel/head32.c        |    5 +++--
 arch/x86/kernel/head64.c        |    5 +++--
 arch/x86/kernel/mpparse.c       |    6 ++----
 arch/x86/kernel/setup.c         |   17 ++++++++---------
 arch/x86/kernel/trampoline.c    |    2 +-
 arch/x86/mm/Makefile            |    2 --
 arch/x86/mm/init.c              |    6 +++---
 arch/x86/mm/memblock.c          |   34 ----------------------------------
 arch/x86/mm/memtest.c           |    2 +-
 arch/x86/mm/numa.c              |    5 ++---
 arch/x86/mm/numa_32.c           |    6 +++---
 arch/x86/mm/numa_emulation.c    |    4 ++--
 arch/x86/platform/efi/efi.c     |    6 ++----
 arch/x86/xen/mmu.c              |   12 ++++--------
 arch/x86/xen/setup.c            |    7 +++----
 include/linux/memblock.h        |    2 --
 mm/memblock.c                   |    5 +++++
 mm/nobootmem.c                  |    6 +++---
 22 files changed, 48 insertions(+), 97 deletions(-)
 delete mode 100644 arch/x86/include/asm/memblock.h
 delete mode 100644 arch/x86/mm/memblock.c

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
deleted file mode 100644
index bc56670..0000000
--- a/arch/x86/include/asm/memblock.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _X86_MEMBLOCK_H
-#define _X86_MEMBLOCK_H
-
-void memblock_x86_reserve_range(u64 start, u64 end, char *name);
-void memblock_x86_free_range(u64 start, u64 end);
-
-#endif
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 5636308..6e76c19 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -94,7 +94,7 @@ static u32 __init allocate_aperture(void)
 				addr, aper_size>>10);
 		return 0;
 	}
-	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64");
+	memblock_reserve(addr, aper_size);
 	/*
 	 * Kmemleak should not scan this block as it may not be mapped via the
 	 * kernel direct mapping.
diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index 621cd23..5da1269 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -91,7 +91,7 @@ void __init setup_bios_corruption_check(void)
 		if (start >= end)
 			continue;
 
-		memblock_x86_reserve_range(start, end, "SCAN RAM");
+		memblock_reserve(start, end - start);
 		scan_areas[num_scan_areas].addr = start;
 		scan_areas[num_scan_areas].size = end - start;
 
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
index af0699b..48d9d4e 100644
--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -52,5 +52,5 @@ void __init reserve_ebda_region(void)
 		lowmem = 0x9f000;
 
 	/* reserve all memory between lowmem and the 1MB mark */
-	memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved");
+	memblock_reserve(lowmem, 0x100000 - lowmem);
 }
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3bb0850..be9282b 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -33,7 +33,8 @@ void __init i386_start_kernel(void)
 {
 	memblock_init();
 
-	memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+	memblock_reserve(__pa_symbol(&_text),
+			 __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
@@ -42,7 +43,7 @@ void __init i386_start_kernel(void)
 		u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 		u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
 		u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
-		memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+		memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
 	}
 #endif
 
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 5655c22..fd25b11 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -100,7 +100,8 @@ void __init x86_64_start_reservations(char *real_mode_data)
 
 	memblock_init();
 
-	memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+	memblock_reserve(__pa_symbol(&_text),
+			 __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
@@ -109,7 +110,7 @@ void __init x86_64_start_reservations(char *real_mode_data)
 		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
 		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
 		unsigned long ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
-		memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+		memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
 	}
 #endif
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 8faeaa0..a6b79c1 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -564,9 +564,7 @@ void __init default_get_smp_config(unsigned int early)
 
 static void __init smp_reserve_memory(struct mpf_intel *mpf)
 {
-	unsigned long size = get_mpc_size(mpf->physptr);
-
-	memblock_x86_reserve_range(mpf->physptr, mpf->physptr+size, "* MP-table mpc");
+	memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
 }
 
 static int __init smp_scan_config(unsigned long base, unsigned long length)
@@ -595,7 +593,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
 			       mpf, (u64)virt_to_phys(mpf));
 
 			mem = virt_to_phys(mpf);
-			memblock_x86_reserve_range(mem, mem + sizeof(*mpf), "* MP-table mpf");
+			memblock_reserve(mem, sizeof(*mpf));
 			if (mpf->physptr)
 				smp_reserve_memory(mpf);
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 31ffe20..97d227e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -306,7 +306,8 @@ static void __init cleanup_highmap(void)
 static void __init reserve_brk(void)
 {
 	if (_brk_end > _brk_start)
-		memblock_x86_reserve_range(__pa(_brk_start), __pa(_brk_end), "BRK");
+		memblock_reserve(__pa(_brk_start),
+				 __pa(_brk_end) - __pa(_brk_start));
 
 	/* Mark brk area as locked down and no longer taking any
 	   new allocations */
@@ -337,7 +338,7 @@ static void __init relocate_initrd(void)
 
 	/* Note: this includes all the lowmem currently occupied by
 	   the initrd, we rely on that fact to keep the data intact. */
-	memblock_x86_reserve_range(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK");
+	memblock_reserve(ramdisk_here, area_size);
 	initrd_start = ramdisk_here + PAGE_OFFSET;
 	initrd_end   = initrd_start + ramdisk_size;
 	printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
@@ -393,7 +394,7 @@ static void __init reserve_initrd(void)
 	initrd_start = 0;
 
 	if (ramdisk_size >= (end_of_lowmem>>1)) {
-		memblock_x86_free_range(ramdisk_image, ramdisk_end);
+		memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
 		printk(KERN_ERR "initrd too large to handle, "
 		       "disabling initrd\n");
 		return;
@@ -416,7 +417,7 @@ static void __init reserve_initrd(void)
 
 	relocate_initrd();
 
-	memblock_x86_free_range(ramdisk_image, ramdisk_end);
+	memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
 }
 #else
 static void __init reserve_initrd(void)
@@ -490,15 +491,13 @@ static void __init memblock_x86_reserve_range_setup_data(void)
 {
 	struct setup_data *data;
 	u64 pa_data;
-	char buf[32];
 
 	if (boot_params.hdr.version < 0x0209)
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
-		sprintf(buf, "setup data %x", data->type);
-		memblock_x86_reserve_range(pa_data, pa_data+sizeof(*data)+data->len, buf);
+		memblock_reserve(pa_data, sizeof(*data) + data->len);
 		pa_data = data->next;
 		early_iounmap(data, sizeof(*data));
 	}
@@ -568,7 +567,7 @@ static void __init reserve_crashkernel(void)
 			return;
 		}
 	}
-	memblock_x86_reserve_range(crash_base, crash_base + crash_size, "CRASH KERNEL");
+	memblock_reserve(crash_base, crash_size);
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
 			"for crashkernel (System RAM: %ldMB)\n",
@@ -626,7 +625,7 @@ static __init void reserve_ibft_region(void)
 	addr = find_ibft_region(&size);
 
 	if (size)
-		memblock_x86_reserve_range(addr, addr + size, "* ibft");
+		memblock_reserve(addr, size);
 }
 
 static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index a1f13dd..a73b610 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -18,7 +18,7 @@ void __init setup_trampolines(void)
 		panic("Cannot allocate trampoline\n");
 
 	x86_trampoline_base = __va(mem);
-	memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE");
+	memblock_reserve(mem, size);
 
 	printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
 	       x86_trampoline_base, (unsigned long long)mem, size);
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 3d11327..23d8e5f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -27,6 +27,4 @@ obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
 obj-$(CONFIG_ACPI_NUMA)		+= srat.o
 obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
-obj-$(CONFIG_HAVE_MEMBLOCK)		+= memblock.o
-
 obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 13cf05a..0b736b9 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -81,7 +81,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse,
 
 void __init native_pagetable_reserve(u64 start, u64 end)
 {
-	memblock_x86_reserve_range(start, end, "PGTABLE");
+	memblock_reserve(start, end - start);
 }
 
 struct map_range {
@@ -280,8 +280,8 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	 * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top)
 	 * so that they can be reused for other purposes.
 	 *
-	 * On native it just means calling memblock_x86_reserve_range, on Xen it
-	 * also means marking RW the pagetable pages that we allocated before
+	 * On native it just means calling memblock_reserve, on Xen it also
+	 * means marking RW the pagetable pages that we allocated before
 	 * but that haven't been used.
 	 *
 	 * In fact on xen we mark RO the whole range pgt_buf_start -
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
deleted file mode 100644
index 7325c5d..0000000
--- a/arch/x86/mm/memblock.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/memblock.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/range.h>
-
-void __init memblock_x86_reserve_range(u64 start, u64 end, char *name)
-{
-	if (start == end)
-		return;
-
-	if (WARN_ONCE(start > end, "memblock_x86_reserve_range: wrong range [%#llx, %#llx)\n", start, end))
-		return;
-
-	memblock_dbg("    memblock_x86_reserve_range: [%#010llx-%#010llx] %16s\n", start, end - 1, name);
-
-	memblock_reserve(start, end - start);
-}
-
-void __init memblock_x86_free_range(u64 start, u64 end)
-{
-	if (start == end)
-		return;
-
-	if (WARN_ONCE(start > end, "memblock_x86_free_range: wrong range [%#llx, %#llx)\n", start, end))
-		return;
-
-	memblock_dbg("       memblock_x86_free_range: [%#010llx-%#010llx]\n", start, end - 1);
-
-	memblock_free(start, end - start);
-}
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 46a5ff2..c80b9fb 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -34,7 +34,7 @@ static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad)
 	       (unsigned long long) pattern,
 	       (unsigned long long) start_bad,
 	       (unsigned long long) end_bad);
-	memblock_x86_reserve_range(start_bad, end_bad, "BAD RAM");
+	memblock_reserve(start_bad, end_bad - start_bad);
 }
 
 static void __init memtest(u64 pattern, u64 start_phys, u64 size)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 88e5627..496f494 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -364,8 +364,7 @@ void __init numa_reset_distance(void)
 
 	/* numa_distance could be 1LU marking allocation failure, test cnt */
 	if (numa_distance_cnt)
-		memblock_x86_free_range(__pa(numa_distance),
-					__pa(numa_distance) + size);
+		memblock_free(__pa(numa_distance), size);
 	numa_distance_cnt = 0;
 	numa_distance = NULL;	/* enable table creation */
 }
@@ -394,7 +393,7 @@ static int __init numa_alloc_distance(void)
 		numa_distance = (void *)1LU;
 		return -ENOMEM;
 	}
-	memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
+	memblock_reserve(phys, size);
 
 	numa_distance = __va(phys);
 	numa_distance_cnt = cnt;
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 58878b5..534255a 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -204,7 +204,7 @@ void __init init_alloc_remap(int nid, u64 start, u64 end)
 			   size, nid);
 		return;
 	}
-	memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
+	memblock_reserve(node_pa, size);
 
 	remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
 					  max_low_pfn << PAGE_SHIFT,
@@ -212,10 +212,10 @@ void __init init_alloc_remap(int nid, u64 start, u64 end)
 	if (!remap_pa) {
 		pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
 			   size, nid);
-		memblock_x86_free_range(node_pa, node_pa + size);
+		memblock_free(node_pa, size);
 		return;
 	}
-	memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
+	memblock_reserve(remap_pa, size);
 	remap_va = phys_to_virt(remap_pa);
 
 	/* perform actual remap */
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index 971fe70..46db568 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -361,7 +361,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 			pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
 			goto no_emu;
 		}
-		memblock_x86_reserve_range(phys, phys + phys_size, "TMP NUMA DIST");
+		memblock_reserve(phys, phys_size);
 		phys_dist = __va(phys);
 
 		for (i = 0; i < numa_dist_cnt; i++)
@@ -430,7 +430,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 
 	/* free the copied physical distance table */
 	if (phys_dist)
-		memblock_x86_free_range(__pa(phys_dist), __pa(phys_dist) + phys_size);
+		memblock_free(__pa(phys_dist), phys_size);
 	return;
 
 no_emu:
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index a4c322c..3b4e86b 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -280,8 +280,7 @@ void __init efi_memblock_x86_reserve_range(void)
 		boot_params.efi_info.efi_memdesc_size;
 	memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
 	memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
-	memblock_x86_reserve_range(pmap, pmap + memmap.nr_map * memmap.desc_size,
-		      "EFI memmap");
+	memblock_reserve(pmap, memmap.nr_map * memmap.desc_size);
 }
 
 #if EFI_DEBUG
@@ -332,8 +331,7 @@ void __init efi_reserve_boot_services(void)
 					"[0x%010llx-0x%010llx]\n",
 						start, start+size-1);
 		} else
-			memblock_x86_reserve_range(start, start+size,
-							"EFI Boot");
+			memblock_reserve(start, size);
 	}
 }
 
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0ccccb6..ad54fa1 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1720,10 +1720,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 	__xen_write_cr3(true, __pa(pgd));
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 
-	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
+	memblock_reserve(__pa(xen_start_info->pt_base),
+			 xen_start_info->nr_pt_frames * PAGE_SIZE);
 
 	return pgd;
 }
@@ -1799,10 +1797,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 			  PFN_DOWN(__pa(initial_page_table)));
 	xen_write_cr3(__pa(initial_page_table));
 
-	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
+	memblock_reserve(__pa(xen_start_info->pt_base),
+			 xen_start_info->nr_pt_frames * PAGE_SIZE));
 
 	return initial_page_table;
 }
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 60aeeb5..73daaf7 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -63,7 +63,7 @@ static void __init xen_add_extra_mem(unsigned long pages)
 	e820_add_region(extra_start, size, E820_RAM);
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
-	memblock_x86_reserve_range(extra_start, extra_start + size, "XEN EXTRA");
+	memblock_reserve(extra_start, size);
 
 	xen_extra_mem_size += size;
 
@@ -287,9 +287,8 @@ char * __init xen_memory_setup(void)
 	 *  - xen_start_info
 	 * See comment above "struct start_info" in <xen/interface/xen.h>
 	 */
-	memblock_x86_reserve_range(__pa(xen_start_info->mfn_list),
-		      __pa(xen_start_info->pt_base),
-			"XEN START INFO");
+	memblock_reserve(__pa(xen_start_info->mfn_list),
+			 xen_start_info->pt_base - xen_start_info->mfn_list);
 
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index f2611d7..86805f9 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -17,8 +17,6 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 
-#include <asm/memblock.h>
-
 #define INIT_MEMBLOCK_REGIONS	128
 
 struct memblock_region {
diff --git a/mm/memblock.c b/mm/memblock.c
index 8971d06..1896c06 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -449,6 +449,9 @@ long __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size)
 
 long __init_memblock memblock_free(phys_addr_t base, phys_addr_t size)
 {
+	memblock_dbg("   memblock_free: [%#016llx-%#016llx] %pF\n",
+		     base, base + size, (void *)_RET_IP_);
+
 	return __memblock_remove(&memblock.reserved, base, size);
 }
 
@@ -456,6 +459,8 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 {
 	struct memblock_type *_rgn = &memblock.reserved;
 
+	memblock_dbg("memblock_reserve: [%#016llx-%#016llx] %pF\n",
+		     base, base + size, (void *)_RET_IP_);
 	BUG_ON(0 == size);
 
 	return memblock_add_region(_rgn, base, size);
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 7075bc0..29d948c 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -47,7 +47,7 @@ static void * __init __alloc_memory_core_early(int nid, u64 size, u64 align,
 
 	ptr = phys_to_virt(addr);
 	memset(ptr, 0, size);
-	memblock_x86_reserve_range(addr, addr + size, "BOOTMEM");
+	memblock_reserve(addr, size);
 	/*
 	 * The min_count is set to 0 so that bootmem allocated blocks
 	 * are never reported as leaks.
@@ -175,7 +175,7 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 			      unsigned long size)
 {
 	kmemleak_free_part(__va(physaddr), size);
-	memblock_x86_free_range(physaddr, physaddr + size);
+	memblock_free(physaddr, size);
 }
 
 /**
@@ -190,7 +190,7 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 void __init free_bootmem(unsigned long addr, unsigned long size)
 {
 	kmemleak_free_part(__va(addr), size);
-	memblock_x86_free_range(addr, addr + size);
+	memblock_free(addr, size);
 }
 
 static void * __init ___alloc_bootmem_nopanic(unsigned long size,
-- 
1.7.6

Re: [PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[Yinghai Lu]

On Tue, Jul 12, 2011 at 2:15 AM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> There are multiple ways to represent memory configuration during boot.
> Even with the latest incarnation - nobootmem, the configuration isn't
> centralized or easy to use.  NUMA information lives in
> early_node_map[] while memory config and alloc/reservation live in
> memblock.  This leads to ugly code pieces which try to combine the two
> separate information sources both in generic and arch specfic parts.
>
> This patchset extends memblock such that it can also host node
> information and allows an arch to do away with early_node_map[] and
> use memblock as the sole early memory config / allocation mechanism.
>
> For short term, this adds yet another config option -
> HAVE_MEMBLOCK_NODE_MAP in this area.  Longer term goal is removing
> early_node_map[] completely and convert everyone over to memblock.  As
> early_node_map[] usage is limited only to NUMA archs, this should be
> easiser than bootmem allocator conversion.  In the end, memblock will
> be the only early mem mechanism.
>
> Note that this patchset still leaves good amount of code which can be
> removed / cleaned up in not too distant future.  For example, memblock
> non-NUMA alloc code can simply be degenerate case of NUMA aware alloc,
> which can also be implemented in simpler and more efficient way with
> reverse free area iterator.
>
> This patchset first extends memblock so that it can contain node
> information and then replaces x86 specific memblock code with the
> generic one.
>
>  0001-memblock-Remove-memblock_memory_can_coalesce.patch
>  0002-memblock-Reimplement-memblock_add_region.patch
>  0003-memblock-Add-optional-region-nid.patch
>  0004-x86-Use-HAVE_MEMBLOCK_NODE_MAP.patch
>  0005-x86-Use-__memblock_alloc_base-in-early_reserve_e820.patch
>  0006-memblock-Implement-for_each_free_mem_range.patch
>  0007-x86-Replace-memblock_x86_find_in_range_size-with-for.patch
>  0008-memblock-x86-Make-free_all_memory_core_early-explici.patch
>  0009-memblock-x86-Replace-__get_free_all_memory_range-wit.patch
>  0010-memblock-x86-Reimplement-memblock_find_dma_reserve-u.patch
>  0011-x86-Use-absent_pages_in_range-instead-of-memblock_x8.patch
>  0012-memblock-x86-Make-ARCH_DISCARD_MEMBLOCK-a-config-opt.patch
>  0013-memblock-x86-Replace-memblock_x86_reserve-free_range.patch
>
> 0001-0004 implement HAVE_MEMBLOCK_NODE_MAP and use it in x86.
>
> 0005-0013 adds generic memblock free area iterator and gradually
> replaces x86 specific memblock mechanism with generic one.

that is great, merge early_node_map into memblock array.

looks it comes with some mismatch section warning...

WARNING: vmlinux.o(.text+0x120ba5): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120baa): Section mismatch in reference from
the function memblock_set_node() to the function
.init.text:memblock_double_array()
The function memblock_set_node() references
the function __init memblock_double_array().
This is often because memblock_set_node lacks a __init
annotation or the annotation of memblock_double_array is wrong.

WARNING: vmlinux.o(.text+0x120bb9): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120bc4): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120bd9): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120c10): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120c15): Section mismatch in reference from
the function memblock_set_node() to the function
.init.text:memblock_insert_region()
The function memblock_set_node() references
the function __init memblock_insert_region().
This is often because memblock_set_node lacks a __init
annotation or the annotation of memblock_insert_region is wrong.

WARNING: vmlinux.o(.text+0x120c3e): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120c43): Section mismatch in reference from
the function memblock_set_node() to the function
.init.text:memblock_insert_region()
The function memblock_set_node() references
the function __init memblock_insert_region().
This is often because memblock_set_node lacks a __init
annotation or the annotation of memblock_insert_region is wrong.

WARNING: vmlinux.o(.text+0x120c59): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120c66): Section mismatch in reference from
the function memblock_set_node() to the variable .init.data:memblock
The function memblock_set_node() references
the variable __initdata memblock.
This is often because memblock_set_node lacks a __initdata
annotation or the annotation of memblock is wrong.

WARNING: vmlinux.o(.text+0x120c6b): Section mismatch in reference from
the function memblock_set_node() to the function
.init.text:memblock_merge_regions()
The function memblock_set_node() references
the function __init memblock_merge_regions().
This is often because memblock_set_node lacks a __init
annotation or the annotation of memblock_merge_regions is wrong.

WARNING: vmlinux.o(.meminit.text+0xacc): Section mismatch in reference
from the function __early_pfn_to_nid() to the function
.init.text:__next_mem_pfn_range()
The function __meminit __early_pfn_to_nid() references
a function __init __next_mem_pfn_range().
If __next_mem_pfn_range is only used by __early_pfn_to_nid then
annotate __next_mem_pfn_range with a matching annotation.

WARNING: vmlinux.o(.meminit.text+0xb70): Section mismatch in reference
from the function get_pfn_range_for_nid() to the function
.init.text:__next_mem_pfn_range()
The function __meminit get_pfn_range_for_nid() references
a function __init __next_mem_pfn_range().
If __next_mem_pfn_range is only used by get_pfn_range_for_nid then
annotate __next_mem_pfn_range with a matching annotation.

WARNING: vmlinux.o(.meminit.text+0xbad): Section mismatch in reference
from the function get_pfn_range_for_nid() to the function
.init.text:__next_mem_pfn_range()
The function __meminit get_pfn_range_for_nid() references
a function __init __next_mem_pfn_range().
If __next_mem_pfn_range is only used by get_pfn_range_for_nid then
annotate __next_mem_pfn_range with a matching annotation.

WARNING: vmlinux.o(.meminit.text+0xcc9): Section mismatch in reference
from the function __absent_pages_in_range() to the function
.init.text:__next_mem_pfn_range()
The function __meminit __absent_pages_in_range() references
a function __init __next_mem_pfn_range().
If __next_mem_pfn_range is only used by __absent_pages_in_range then
annotate __next_mem_pfn_range with a matching annotation.

WARNING: vmlinux.o(.meminit.text+0xd1a): Section mismatch in reference
from the function __absent_pages_in_range() to the function
.init.text:__next_mem_pfn_range()
The function __meminit __absent_pages_in_range() references
a function __init __next_mem_pfn_range().
If __next_mem_pfn_range is only used by __absent_pages_in_range then
annotate __next_mem_pfn_range with a matching annotation.

Re: [PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[H. Peter Anvin]

On 07/12/2011 04:26 PM, Yinghai Lu wrote:
> 
> that is great, merge early_node_map into memblock array.
> 
> looks it comes with some mismatch section warning...
> 

I'm also confused about the baseline of the patchset...

	-hpa

Re: [PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[Tejun Heo]

Hello, Yinghai.

On Tue, Jul 12, 2011 at 04:26:57PM -0700, Yinghai Lu wrote:
> On Tue, Jul 12, 2011 at 2:15 AM, Tejun Heo <tj@kernel.org> wrote:
> > 0005-0013 adds generic memblock free area iterator and gradually
> > replaces x86 specific memblock mechanism with generic one.
> 
> that is great, merge early_node_map into memblock array.

Yeah and with proper top down allocator and iterator, we should be
able to add back the early per-node allocaiton thing.

> looks it comes with some mismatch section warning...
> 
> WARNING: vmlinux.o(.text+0x120ba5): Section mismatch in reference from
> the function memblock_set_node() to the variable .init.data:memblock
> The function memblock_set_node() references
> the variable __initdata memblock.
> This is often because memblock_set_node lacks a __initdata
> annotation or the annotation of memblock is wrong.

Oh, the __memblock_init thing.  Can you please attach .config you
used?

Thanks.

-- 
tejun

Re: [PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[Tejun Heo]

Hello,

On Tue, Jul 12, 2011 at 08:21:23PM -0700, H. Peter Anvin wrote:
> On 07/12/2011 04:26 PM, Yinghai Lu wrote:
> > 
> > that is great, merge early_node_map into memblock array.
> > 
> > looks it comes with some mismatch section warning...
> > 
> 
> I'm also confused about the baseline of the patchset...

The whole thing is on top of x86/urgent for the commit which disabled
AMD NUMA on 32bit, so it's like the following.

  x86/urgent (5da0ef9a8 "x86: Disable AMD_NUMA for 32bit for now")

+ Two patches for pfn->nid mapping granularity check (applied now)

    http://thread.gmane.org/gmane.linux.kernel/1166521

+ memblock, x86: Misc cleanups

    http://thread.gmane.org/gmane.linux.kernel.cross-arch/10338

+ memblock, x86: Implement for_each_mem_pfn_range() and use it to improve memblock allocator

    http://thread.gmane.org/gmane.linux.kernel.cross-arch/10345

+ memblock, x86: Allow node info in memblock and remove x86 specific memblock code

    http://thread.gmane.org/gmane.linux.kernel.cross-arch/10354

Thanks.

-- 
tejun

Re: [PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[Yinghai Lu]

[-- Attachment #1: Type: text/plain, Size: 605 bytes --]

On Wed, Jul 13, 2011 at 2:11 AM, Tejun Heo <tj@kernel.org> wrote:
>> looks it comes with some mismatch section warning...
>>
>> WARNING: vmlinux.o(.text+0x120ba5): Section mismatch in reference from
>> the function memblock_set_node() to the variable .init.data:memblock
>> The function memblock_set_node() references
>> the variable __initdata memblock.
>> This is often because memblock_set_node lacks a __initdata
>> annotation or the annotation of memblock is wrong.
>
> Oh, the __memblock_init thing.  Can you please attach .config you
> used?

please check attached config.

Yinghai

[-- Attachment #2: config.full.999999 --]
[-- Type: application/octet-stream, Size: 86958 bytes --]

#
# Automatically generated make config: don't edit
# Linux/x86_64 3.0.0-rc7 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-yh"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=255
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
CONFIG_TCP_CONG_HSTCP=y
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
CONFIG_TCP_CONG_SCALABLE=y
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=y
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y

#
# Near Field Communication (NFC) devices
#
# CONFIG_PN544_NFC is not set
# CONFIG_NFC_PN533 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="ql2100_fw.bin ql2300_fw.bin ql2400_fw.bin ql2200_fw.bin ql2322_fw.bin ql2500_fw.bin"
CONFIG_EXTRA_FIRMWARE_DIR="../firmware"
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=262144
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_LPFC_DEBUG_FS=y
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
CONFIG_SATA_SVW=y
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_RAID is not set
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_JME=y
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4VF=y
CONFIG_ENIC=y
CONFIG_IXGBE=y
CONFIG_IXGBEVF=y
CONFIG_IXGB=y
CONFIG_S2IO=y
CONFIG_MYRI10GE=y
CONFIG_NIU=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLCNIC=y
CONFIG_QLGE=y
CONFIG_BNA=y
CONFIG_SFC=y
CONFIG_BE2NET=y
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
# CONFIG_USB_VL600 is not set
# CONFIG_WAN is not set

#
# CAIF transport drivers
#
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_NET_FC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_VIRTIO_NET=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
CONFIG_SP5100_TCO=y
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_RC_CORE=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_LIRC_CODEC=y
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
CONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_IMX074 is not set
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_RJ54N1 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV2640 is not set
# CONFIG_SOC_CAMERA_OV6650 is not set
# CONFIG_SOC_CAMERA_OV772X is not set
# CONFIG_SOC_CAMERA_OV9640 is not set
# CONFIG_SOC_CAMERA_OV9740 is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
CONFIG_USB_GSPCA_SPCA505=y
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_TLG2300 is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_SIANO_MDTV is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported Mantis Adapters
#
CONFIG_MANTIS_CORE=y
CONFIG_DVB_MANTIS=y
CONFIG_DVB_HOPPER=y

#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=y
CONFIG_DVB_MB86A16=y

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_ZL10353=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#

#
# ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=y
CONFIG_DVB_TDA665x=y

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_SOC=y
# CONFIG_SND_SOC_CACHE_LZO is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_QIB=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
CONFIG_INFINIBAND_CXGB3_DEBUG=y
CONFIG_INFINIBAND_CXGB4=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_DECODE_MCE is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_MXM_WMI is not set
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_INTR_REMAP=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_GFS2_FS_LOCKING_DLM is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_XZ is not set
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_BASE=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_LKDTM=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
CONFIG_SAMPLE_TRACE_EVENTS=m
CONFIG_SAMPLE_KOBJECT=m
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
# CONFIG_INTEL_TXT is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set

Re: [PATCH 04/13] x86: Use HAVE_MEMBLOCK_NODE_MAP

[H. Peter Anvin]

On 07/12/2011 02:15 AM, Tejun Heo wrote:
> Convert x86 to HAVE_MEMBLOCK_NODE_MAP.  The only difference in memory
> handling is that allocations can't no longer cross node boundaries
> whether they're node affine or not, which shouldn't matter at all.
> 
> This conversion will enable further simplification of boot memory
> handling.
> 
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Yinghai Lu <yinghai@kernel.org>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: "H. Peter Anvin" <hpa@zytor.com>

Hi Tejun,

This patch causes a build error on i386 allnoconfig:

/home/hpa/kernel/linux-2.6-tip.memblock/arch/x86/mm/init_32.c: In
function ‘initmem_init’:
/home/hpa/kernel/linux-2.6-tip.memblock/arch/x86/mm/init_32.c:653:2:
error: implicit declaration of function
‘memblock_x86_register_active_regions’
[-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors

	-hpa

[PATCH 2.5/13] memblock: Use __meminit[data] instead of __init[data]

[Tejun Heo]

>From 19ab281ed67b87a6623d725237a7333ca79f1e75 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

memblock will be extended to include early_node_map[], which is also
used during memory hotplug.  Make memblock use __meminit[data] instead
of __init[data] so that memory hotplug code can safely reference it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/linux/memblock.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index aa5df9e..434b958 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -152,8 +152,8 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
 
 
 #ifdef ARCH_DISCARD_MEMBLOCK
-#define __init_memblock __init
-#define __initdata_memblock __initdata
+#define __init_memblock __meminit
+#define __initdata_memblock __meminitdata
 #else
 #define __init_memblock
 #define __initdata_memblock
-- 
1.7.6

[PATCH UPDATED 03/13] memblock: Add optional region->nid

[Tejun Heo]

>From 83103b92f3234ec830852bbc5c45911bd6cbdb20 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

Add optional region->nid which can be enabled by arch using
CONFIG_HAVE_MEMBLOCK_NODE_MAP.  When enabled, memblock also carries
NUMA node information and replaces early_node_map[].

Newly added memblocks have MAX_NUMNODES as nid.  Arch can then call
memblock_set_node() to set node information.  memblock takes care of
merging and node affine allocations w.r.t. node information.

When MEMBLOCK_NODE_MAP is enabled, early_node_map[], related data
structures and functions to manipulate and iterate it are disabled.
memblock version of __next_mem_pfn_range() is provided such that
for_each_mem_pfn_range() behaves the same and its users don't have to
be updated.

-v2: Yinghai spotted section mismatch caused by missing
     __init_memblock in memblock_set_node().  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/linux/memblock.h |   26 ++++++++
 include/linux/mm.h       |    2 +
 mm/Kconfig               |    3 +
 mm/memblock.c            |  142 ++++++++++++++++++++++++++++++++++++++++------
 mm/page_alloc.c          |   47 +++++++++------
 5 files changed, 183 insertions(+), 37 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 434b958..c36a55d 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -24,6 +24,9 @@
 struct memblock_region {
 	phys_addr_t base;
 	phys_addr_t size;
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+	int nid;
+#endif
 };
 
 struct memblock_type {
@@ -58,6 +61,29 @@ extern long memblock_remove(phys_addr_t base, phys_addr_t size);
 extern long memblock_free(phys_addr_t base, phys_addr_t size);
 extern long memblock_reserve(phys_addr_t base, phys_addr_t size);
 
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+extern int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid);
+
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+	r->nid = nid;
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return r->nid;
+}
+#else
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return 0;
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
 /* The numa aware allocator is only available if
  * CONFIG_ARCH_POPULATES_NODE_MAP is set
  */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 9ebc65a..ceb1e4a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1307,12 +1307,14 @@ extern void free_area_init_node(int nid, unsigned long * zones_size,
  * CONFIG_ARCH_POPULATES_NODE_MAP
  */
 extern void free_area_init_nodes(unsigned long *max_zone_pfn);
+#ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 extern void add_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
 extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
 extern void remove_all_active_ranges(void);
 void sort_node_map(void);
+#endif
 unsigned long node_map_pfn_alignment(void);
 unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn,
 						unsigned long end_pfn);
diff --git a/mm/Kconfig b/mm/Kconfig
index 8ca47a5..30a5d47 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -131,6 +131,9 @@ config SPARSEMEM_VMEMMAP
 config HAVE_MEMBLOCK
 	boolean
 
+config HAVE_MEMBLOCK_NODE_MAP
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/memblock.c b/mm/memblock.c
index 992aa18..e815f4b 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -161,12 +161,8 @@ int __init_memblock memblock_reserve_reserved_regions(void)
 
 static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
 {
-	unsigned long i;
-
-	for (i = r; i < type->cnt - 1; i++) {
-		type->regions[i].base = type->regions[i + 1].base;
-		type->regions[i].size = type->regions[i + 1].size;
-	}
+	memmove(&type->regions[r], &type->regions[r + 1],
+		(type->cnt - (r + 1)) * sizeof(type->regions[r]));
 	type->cnt--;
 
 	/* Special case for empty arrays */
@@ -174,6 +170,7 @@ static void __init_memblock memblock_remove_region(struct memblock_type *type, u
 		type->cnt = 1;
 		type->regions[0].base = 0;
 		type->regions[0].size = 0;
+		memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
 	}
 }
 
@@ -266,7 +263,9 @@ static void __init_memblock memblock_merge_regions(struct memblock_type *type)
 		struct memblock_region *this = &type->regions[i];
 		struct memblock_region *next = &type->regions[i + 1];
 
-		if (this->base + this->size != next->base) {
+		if (this->base + this->size != next->base ||
+		    memblock_get_region_node(this) !=
+		    memblock_get_region_node(next)) {
 			BUG_ON(this->base + this->size > next->base);
 			i++;
 			continue;
@@ -290,7 +289,7 @@ static void __init_memblock memblock_merge_regions(struct memblock_type *type)
  */
 static void __init_memblock memblock_insert_region(struct memblock_type *type,
 						   int idx, phys_addr_t base,
-						   phys_addr_t size)
+						   phys_addr_t size, int nid)
 {
 	struct memblock_region *rgn = &type->regions[idx];
 
@@ -298,6 +297,7 @@ static void __init_memblock memblock_insert_region(struct memblock_type *type,
 	memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn));
 	rgn->base = base;
 	rgn->size = size;
+	memblock_set_region_node(rgn, nid);
 	type->cnt++;
 }
 
@@ -327,6 +327,7 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		WARN_ON(type->cnt != 1);
 		type->regions[0].base = base;
 		type->regions[0].size = size;
+		memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
 		return 0;
 	}
 repeat:
@@ -355,7 +356,7 @@ repeat:
 			nr_new++;
 			if (insert)
 				memblock_insert_region(type, i++, base,
-						       rbase - base);
+						rbase - base, MAX_NUMNODES);
 		}
 		/* area below @rend is dealt with, forget about it */
 		base = min(rend, end);
@@ -365,7 +366,8 @@ repeat:
 	if (base < end) {
 		nr_new++;
 		if (insert)
-			memblock_insert_region(type, i, base, end - base);
+			memblock_insert_region(type, i, base, end - base,
+					       MAX_NUMNODES);
 	}
 
 	/*
@@ -459,6 +461,101 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 	return memblock_add_region(_rgn, base, size);
 }
 
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+/*
+ * Common iterator interface used to define for_each_mem_range().
+ */
+void __init_memblock __next_mem_pfn_range(int *idx, int nid,
+				unsigned long *out_start_pfn,
+				unsigned long *out_end_pfn, int *out_nid)
+{
+	struct memblock_type *type = &memblock.memory;
+	struct memblock_region *r;
+
+	while (++*idx < type->cnt) {
+		r = &type->regions[*idx];
+
+		if (PFN_UP(r->base) >= PFN_DOWN(r->base + r->size))
+			continue;
+		if (nid == MAX_NUMNODES || nid == r->nid)
+			break;
+	}
+	if (*idx >= type->cnt) {
+		*idx = -1;
+		return;
+	}
+
+	if (out_start_pfn)
+		*out_start_pfn = PFN_UP(r->base);
+	if (out_end_pfn)
+		*out_end_pfn = PFN_DOWN(r->base + r->size);
+	if (out_nid)
+		*out_nid = r->nid;
+}
+
+/**
+ * memblock_set_node - set node ID on memblock regions
+ * @base: base of area to set node ID for
+ * @size: size of area to set node ID for
+ * @nid: node ID to set
+ *
+ * Set the nid of memblock memory regions in [@base,@base+@size) to @nid.
+ * Regions which cross the area boundaries are split as necessary.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init_memblock memblock_set_node(phys_addr_t base, phys_addr_t size,
+				      int nid)
+{
+	struct memblock_type *type = &memblock.memory;
+	phys_addr_t end = base + size;
+	int i;
+
+	/* we'll create at most two more regions */
+	while (type->cnt + 2 > type->max)
+		if (memblock_double_array(type) < 0)
+			return -ENOMEM;
+
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		phys_addr_t rbase = rgn->base;
+		phys_addr_t rend = rbase + rgn->size;
+
+		if (rbase >= end)
+			break;
+		if (rend <= base)
+			continue;
+
+		if (rbase < base) {
+			/*
+			 * @rgn intersects from below.  Split and continue
+			 * to process the next region - the new top half.
+			 */
+			rgn->base = base;
+			rgn->size = rend - rgn->base;
+			memblock_insert_region(type, i, rbase, base - rbase,
+					       rgn->nid);
+		} else if (rend > end) {
+			/*
+			 * @rgn intersects from above.  Split and redo the
+			 * current region - the new bottom half.
+			 */
+			rgn->base = end;
+			rgn->size = rend - rgn->base;
+			memblock_insert_region(type, i--, rbase, end - rbase,
+					       rgn->nid);
+		} else {
+			/* @rgn is fully contained, set ->nid */
+			rgn->nid = nid;
+		}
+	}
+
+	memblock_merge_regions(type);
+	return 0;
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
 phys_addr_t __init __memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr)
 {
 	phys_addr_t found;
@@ -689,19 +786,26 @@ void __init_memblock memblock_set_current_limit(phys_addr_t limit)
 	memblock.current_limit = limit;
 }
 
-static void __init_memblock memblock_dump(struct memblock_type *region, char *name)
+static void __init_memblock memblock_dump(struct memblock_type *type, char *name)
 {
 	unsigned long long base, size;
 	int i;
 
-	pr_info(" %s.cnt  = 0x%lx\n", name, region->cnt);
-
-	for (i = 0; i < region->cnt; i++) {
-		base = region->regions[i].base;
-		size = region->regions[i].size;
+	pr_info(" %s.cnt  = 0x%lx\n", name, type->cnt);
 
-		pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes\n",
-		    name, i, base, base + size - 1, size);
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		char nid_buf[32] = "";
+
+		base = rgn->base;
+		size = rgn->size;
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+		if (memblock_get_region_node(rgn) != MAX_NUMNODES)
+			snprintf(nid_buf, sizeof(nid_buf), " on node %d",
+				 memblock_get_region_node(rgn));
+#endif
+		pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes%s\n",
+			name, i, base, base + size - 1, size, nid_buf);
 	}
 }
 
@@ -759,11 +863,13 @@ void __init memblock_init(void)
 	 */
 	memblock.memory.regions[0].base = 0;
 	memblock.memory.regions[0].size = 0;
+	memblock_set_region_node(&memblock.memory.regions[0], MAX_NUMNODES);
 	memblock.memory.cnt = 1;
 
 	/* Ditto. */
 	memblock.reserved.regions[0].base = 0;
 	memblock.reserved.regions[0].size = 0;
+	memblock_set_region_node(&memblock.reserved.regions[0], MAX_NUMNODES);
 	memblock.reserved.cnt = 1;
 
 	memblock.current_limit = MEMBLOCK_ALLOC_ANYWHERE;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8ab5e5e..3c7ea45 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -182,28 +182,31 @@ static unsigned long __meminitdata nr_all_pages;
 static unsigned long __meminitdata dma_reserve;
 
 #ifdef CONFIG_ARCH_POPULATES_NODE_MAP
-  /*
-   * MAX_ACTIVE_REGIONS determines the maximum number of distinct
-   * ranges of memory (RAM) that may be registered with add_active_range().
-   * Ranges passed to add_active_range() will be merged if possible
-   * so the number of times add_active_range() can be called is
-   * related to the number of nodes and the number of holes
-   */
-  #ifdef CONFIG_MAX_ACTIVE_REGIONS
-    /* Allow an architecture to set MAX_ACTIVE_REGIONS to save memory */
-    #define MAX_ACTIVE_REGIONS CONFIG_MAX_ACTIVE_REGIONS
-  #else
-    #if MAX_NUMNODES >= 32
-      /* If there can be many nodes, allow up to 50 holes per node */
-      #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
+  #ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+    /*
+     * MAX_ACTIVE_REGIONS determines the maximum number of distinct ranges
+     * of memory (RAM) that may be registered with add_active_range().
+     * Ranges passed to add_active_range() will be merged if possible so
+     * the number of times add_active_range() can be called is related to
+     * the number of nodes and the number of holes
+     */
+    #ifdef CONFIG_MAX_ACTIVE_REGIONS
+      /* Allow an architecture to set MAX_ACTIVE_REGIONS to save memory */
+      #define MAX_ACTIVE_REGIONS CONFIG_MAX_ACTIVE_REGIONS
     #else
-      /* By default, allow up to 256 distinct regions */
-      #define MAX_ACTIVE_REGIONS 256
+      #if MAX_NUMNODES >= 32
+        /* If there can be many nodes, allow up to 50 holes per node */
+        #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
+      #else
+        /* By default, allow up to 256 distinct regions */
+        #define MAX_ACTIVE_REGIONS 256
+      #endif
     #endif
-  #endif
 
-  static struct node_active_region __meminitdata early_node_map[MAX_ACTIVE_REGIONS];
-  static int __meminitdata nr_nodemap_entries;
+    static struct node_active_region __meminitdata early_node_map[MAX_ACTIVE_REGIONS];
+    static int __meminitdata nr_nodemap_entries;
+#endif /* !CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
   static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
   static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
   static unsigned long __initdata required_kernelcore;
@@ -4268,6 +4271,7 @@ static inline void setup_nr_node_ids(void)
 }
 #endif
 
+#ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 /*
  * Common iterator interface used to define for_each_mem_pfn_range().
  */
@@ -4456,6 +4460,11 @@ void __init sort_node_map(void)
 			sizeof(struct node_active_region),
 			cmp_node_active_region, NULL);
 }
+#else /* !CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+static inline void sort_node_map(void)
+{
+}
+#endif
 
 /**
  * node_map_pfn_alignment - determine the maximum internode alignment
-- 
1.7.6

[PATCH UPDATED 04/13] x86: Use HAVE_MEMBLOCK_NODE_MAP

[Tejun Heo]

>From 5732e1247898d67cbf837585150fe9f68974671d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

Convert x86 to HAVE_MEMBLOCK_NODE_MAP.  The only difference in memory
handling is that allocations can't no longer cross node boundaries
whether they're node affine or not, which shouldn't matter at all.

This conversion will enable further simplification of boot memory
handling.

-v2: Fix build failure on !NUMA configurations discovered by hpa.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/Kconfig                |    1 +
 arch/x86/include/asm/memblock.h |    2 --
 arch/x86/mm/init_32.c           |    8 ++++----
 arch/x86/mm/init_64.c           |    2 +-
 arch/x86/mm/memblock.c          |   14 --------------
 arch/x86/mm/numa.c              |   15 +++++++--------
 6 files changed, 13 insertions(+), 29 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index da34972..97f0894 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -25,6 +25,7 @@ config X86
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 161792e..1460db2 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -12,8 +12,6 @@ int __get_free_all_memory_range(struct range **range, int nodeid,
 			 unsigned long start_pfn, unsigned long end_pfn);
 int get_free_all_memory_range(struct range **rangep, int nodeid);
 
-void memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn);
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
 u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 29f7c6d..5d173db 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -650,18 +650,18 @@ void __init initmem_init(void)
 	highstart_pfn = highend_pfn = max_pfn;
 	if (max_pfn > max_low_pfn)
 		highstart_pfn = max_low_pfn;
-	memblock_x86_register_active_regions(0, 0, highend_pfn);
-	sparse_memory_present_with_active_regions(0);
 	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
 		pages_to_mb(highend_pfn - highstart_pfn));
 	num_physpages = highend_pfn;
 	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
 #else
-	memblock_x86_register_active_regions(0, 0, max_low_pfn);
-	sparse_memory_present_with_active_regions(0);
 	num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
 #endif
+
+	memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
+	sparse_memory_present_with_active_regions(0);
+
 #ifdef CONFIG_FLATMEM
 	max_mapnr = num_physpages;
 #endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index d865c4a..7fb064c 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -607,7 +607,7 @@ kernel_physical_mapping_init(unsigned long start,
 #ifndef CONFIG_NUMA
 void __init initmem_init(void)
 {
-	memblock_x86_register_active_regions(0, 0, max_pfn);
+	memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
 }
 #endif
 
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index e4569f8..97fbc39 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -283,20 +283,6 @@ static int __init memblock_x86_find_active_region(const struct memblock_region *
 	return 1;
 }
 
-/* Walk the memblock.memory map and register active regions within a node */
-void __init memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn)
-{
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r)
-		if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
-					   &ei_startpfn, &ei_endpfn))
-			add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
 /*
  * Find the hole size (in bytes) in the memory range.
  * @start: starting address of the memory range to scan
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 824efad..f4a40bd 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -498,13 +498,10 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 	if (WARN_ON(nodes_empty(node_possible_map)))
 		return -EINVAL;
 
-	for (i = 0; i < mi->nr_blks; i++)
-		memblock_x86_register_active_regions(mi->blk[i].nid,
-					mi->blk[i].start >> PAGE_SHIFT,
-					mi->blk[i].end >> PAGE_SHIFT);
-
-	/* for out of order entries */
-	sort_node_map();
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *mb = &mi->blk[i];
+		memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
+	}
 
 	/*
 	 * If sections array is gonna be used for pfn -> nid mapping, check
@@ -538,6 +535,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			setup_node_data(nid, start, end);
 	}
 
+	/* Dump memblock with node info and return. */
+	memblock_dump_all();
 	return 0;
 }
 
@@ -575,7 +574,7 @@ static int __init numa_init(int (*init_func)(void))
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	remove_all_active_ranges();
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
 	numa_reset_distance();
 
 	ret = init_func();
-- 
1.7.6

[PATCH UPDATED 12/13] memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option

[Tejun Heo]

>From 6839454ae63f1eb21e515c10229ca95c22955fec Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:17 +0200

Make ARCH_DISCARD_MEMBLOCK a config option so that it can be handled
together with other MEMBLOCK options.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
Nothing really changed.  Just patch context update to resolve conflict
from updates earlier in the series.

Thanks.

 arch/x86/Kconfig                |    1 +
 arch/x86/include/asm/memblock.h |    2 --
 include/linux/memblock.h        |    2 +-
 mm/Kconfig                      |    3 +++
 mm/memblock.c                   |    2 +-
 5 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 97f0894..28116d4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,6 +26,7 @@ config X86
 	select HAVE_KPROBES
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 17a882e..bc56670 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -1,8 +1,6 @@
 #ifndef _X86_MEMBLOCK_H
 #define _X86_MEMBLOCK_H
 
-#define ARCH_DISCARD_MEMBLOCK
-
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 31def58..2491355 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -197,7 +197,7 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
 	     region++)
 
 
-#ifdef ARCH_DISCARD_MEMBLOCK
+#ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
 #define __init_memblock __meminit
 #define __initdata_memblock __meminitdata
 #else
diff --git a/mm/Kconfig b/mm/Kconfig
index 30a5d47..7c56971 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -134,6 +134,9 @@ config HAVE_MEMBLOCK
 config HAVE_MEMBLOCK_NODE_MAP
 	boolean
 
+config ARCH_DISCARD_MEMBLOCK
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/memblock.c b/mm/memblock.c
index c4a8750..ebc6119 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -959,7 +959,7 @@ static int __init early_memblock(char *p)
 }
 early_param("memblock", early_memblock);
 
-#if defined(CONFIG_DEBUG_FS) && !defined(ARCH_DISCARD_MEMBLOCK)
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_ARCH_DISCARD_MEMBLOCK)
 
 static int memblock_debug_show(struct seq_file *m, void *private)
 {
-- 
1.7.6

Re: [PATCHSET x86/mm] memblock, x86: Allow node info in memblock and remove x86 specific memblock code

[Tejun Heo]

Hello,

I just posted one extra patch and several updated patches.  All the
updates were minor so I didn't want to resend the whole thing (yet).
It would probably be easiest to check the updated git branches.

 git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git review-x86-mm-iter
 git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git review-x86-mm-memblock

git.korg is still synching.  The first one should be
8168136c0d47b53b7964385990710516c1199124 and the second
fb514c91dd44d9d88f29b20dddeeb8882bd89066.

Thank you.

-- 
tejun

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[H. Peter Anvin]

On 07/12/2011 02:16 AM, Tejun Heo wrote:
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -449,6 +449,9 @@ long __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size)
>  
>  long __init_memblock memblock_free(phys_addr_t base, phys_addr_t size)
>  {
> +	memblock_dbg("   memblock_free: [%#016llx-%#016llx] %pF\n",
> +		     base, base + size, (void *)_RET_IP_);
> +
>  	return __memblock_remove(&memblock.reserved, base, size);
>  }
>  
> @@ -456,6 +459,8 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
>  {
>  	struct memblock_type *_rgn = &memblock.reserved;
>  
> +	memblock_dbg("memblock_reserve: [%#016llx-%#016llx] %pF\n",
> +		     base, base + size, (void *)_RET_IP_);
>  	BUG_ON(0 == size);
>  
>  	return memblock_add_region(_rgn, base, size);

This assumes phys_addr_t == unsigned long long, which is just plain
wrong.  I will fix it up, but please take more care with that in the
future.  This triggers a warning when building for i386 non-PAE, which
is a good thing because it is a real error.

Also, don't we usually display resources as an *inclusive* range,
meaning that the last one should be base + size - 1?

	-hpa

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Tejun Heo]

Hello,

On Thu, Jul 14, 2011 at 10:10 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 07/12/2011 02:16 AM, Tejun Heo wrote:
>> +     memblock_dbg("memblock_reserve: [%#016llx-%#016llx] %pF\n",
>> +                  base, base + size, (void *)_RET_IP_);
>>       BUG_ON(0 == size);
>>
>>       return memblock_add_region(_rgn, base, size);
>
> This assumes phys_addr_t == unsigned long long, which is just plain
> wrong.  I will fix it up, but please take more care with that in the
> future.  This triggers a warning when building for i386 non-PAE, which
> is a good thing because it is a real error.

Oh, right, I got confused w/ u64.

> Also, don't we usually display resources as an *inclusive* range,
> meaning that the last one should be base + size - 1?

Hmm... looking at the boot log, not really. [ ) ranges are more
common. memblock code is one of notable exceptions and I actually was
thinking about converting it. [ ) ranges are easier to recognize and
most of code we have can't deal with the full range (and it shouldn't
need to - chopping off one top and bottom is much saner approach
anyway).

Thanks.

-- 
tejun

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[H. Peter Anvin]

On 07/14/2011 01:20 PM, Tejun Heo wrote:
> 
> Hmm... looking at the boot log, not really. [ ) ranges are more
> common. memblock code is one of notable exceptions and I actually was
> thinking about converting it. [ ) ranges are easier to recognize and
> most of code we have can't deal with the full range (and it shouldn't
> need to - chopping off one top and bottom is much saner approach
> anyway).
> 

Sorry I don't follow.  We display resources as [...] ranges, and in
particular when there are those kinds of brackets they tend to be
inclusive ranges.

For the internal representation, of course, [ ) ranges or (base, length)
are the only sensible options.

	-hpa

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Tejun Heo]

Hello,

On Thu, Jul 14, 2011 at 10:23 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 07/14/2011 01:20 PM, Tejun Heo wrote:
> Sorry I don't follow.  We display resources as [...] ranges, and in
> particular when there are those kinds of brackets they tend to be
> inclusive ranges.
>
> For the internal representation, of course, [ ) ranges or (base, length)
> are the only sensible options.

[ ) ranges: e820, init_memory_mapping, NUMA nodes, Zone PFN ranges, PM
nosave memory

[ ] ranges: MTRR, NODE_DATA, early_node_map, [mm]io ranges

Hmm... I was only looking at the early boot messages which didn't
include the io ranges.  It ultimately is a cosmetic issue so my
opinions aren't very strong but I think we can leave [mm]io ranges
alone and converge the rest into [ ) ranges sans the brackets?

Thanks.

-- 
tejun

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[H. Peter Anvin]

On 07/14/2011 01:32 PM, Tejun Heo wrote:
> Hello,
> 
> On Thu, Jul 14, 2011 at 10:23 PM, H. Peter Anvin <hpa@zytor.com> wrote:
>> On 07/14/2011 01:20 PM, Tejun Heo wrote:
>> Sorry I don't follow.  We display resources as [...] ranges, and in
>> particular when there are those kinds of brackets they tend to be
>> inclusive ranges.
>>
>> For the internal representation, of course, [ ) ranges or (base, length)
>> are the only sensible options.
> 
> [ ) ranges: e820, init_memory_mapping, NUMA nodes, Zone PFN ranges, PM
> nosave memory
> 
> [ ] ranges: MTRR, NODE_DATA, early_node_map, [mm]io ranges
> 
> Hmm... I was only looking at the early boot messages which didn't
> include the io ranges.  It ultimately is a cosmetic issue so my
> opinions aren't very strong but I think we can leave [mm]io ranges
> alone and converge the rest into [ ) ranges sans the brackets?
> 

Agreed it's a cosmetic issue... this discussion has already been had,
though, and the consensus is to move the kernel to the standardized
resource format.

	-hpa

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Tejun Heo]

Hello,

On Thu, Jul 14, 2011 at 10:38 PM, H. Peter Anvin <hpa@zytor.com> wrote:
>> Hmm... I was only looking at the early boot messages which didn't
>> include the io ranges.  It ultimately is a cosmetic issue so my
>> opinions aren't very strong but I think we can leave [mm]io ranges
>> alone and converge the rest into [ ) ranges sans the brackets?
>
> Agreed it's a cosmetic issue... this discussion has already been had,
> though, and the consensus is to move the kernel to the standardized
> resource format.

OIC, in that case, please go ahead and change it.  It seems that we
haven't been too successful at applying the decision tho. :(

Thanks.

-- 
tejun

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[H. Peter Anvin]

On 07/14/2011 01:41 PM, Tejun Heo wrote:
> Hello,
> 
> On Thu, Jul 14, 2011 at 10:38 PM, H. Peter Anvin <hpa@zytor.com> wrote:
>>> Hmm... I was only looking at the early boot messages which didn't
>>> include the io ranges.  It ultimately is a cosmetic issue so my
>>> opinions aren't very strong but I think we can leave [mm]io ranges
>>> alone and converge the rest into [ ) ranges sans the brackets?
>>
>> Agreed it's a cosmetic issue... this discussion has already been had,
>> though, and the consensus is to move the kernel to the standardized
>> resource format.
> 
> OIC, in that case, please go ahead and change it.  It seems that we
> haven't been too successful at applying the decision tho. :(
> 

It's a work in progress.

	-hpa

Re: [PATCH 2.5/13] memblock: Use __meminit[data] instead of __init[data]

[Yinghai Lu]

On Thu, Jul 14, 2011 at 2:42 AM, Tejun Heo <tj@kernel.org> wrote:
> From 19ab281ed67b87a6623d725237a7333ca79f1e75 Mon Sep 17 00:00:00 2001
> From: Tejun Heo <tj@kernel.org>
> Date: Thu, 14 Jul 2011 11:22:16 +0200
>
> memblock will be extended to include early_node_map[], which is also
> used during memory hotplug.  Make memblock use __meminit[data] instead
> of __init[data] so that memory hotplug code can safely reference it.
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Reported-by: Yinghai Lu <yinghai@kernel.org>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>  include/linux/memblock.h |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/memblock.h b/include/linux/memblock.h
> index aa5df9e..434b958 100644
> --- a/include/linux/memblock.h
> +++ b/include/linux/memblock.h
> @@ -152,8 +152,8 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
>
>
>  #ifdef ARCH_DISCARD_MEMBLOCK
> -#define __init_memblock __init
> -#define __initdata_memblock __initdata
> +#define __init_memblock __meminit
> +#define __initdata_memblock __meminitdata
>  #else
>  #define __init_memblock
>  #define __initdata_memblock

that is not good. It will keep memblock.reserved related data and
functions after boot.
and those data/func are not used after slab is ready.

Thanks

Yinghai

Re: [PATCH 2.5/13] memblock: Use __meminit[data] instead of __init[data]

[H. Peter Anvin]

On 07/14/2011 02:00 PM, Yinghai Lu wrote:
>>
>> diff --git a/include/linux/memblock.h b/include/linux/memblock.h
>> index aa5df9e..434b958 100644
>> --- a/include/linux/memblock.h
>> +++ b/include/linux/memblock.h
>> @@ -152,8 +152,8 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
>>
>>
>>  #ifdef ARCH_DISCARD_MEMBLOCK
>> -#define __init_memblock __init
>> -#define __initdata_memblock __initdata
>> +#define __init_memblock __meminit
>> +#define __initdata_memblock __meminitdata
>>  #else
>>  #define __init_memblock
>>  #define __initdata_memblock
> 
> that is not good. It will keep memblock.reserved related data and
> functions after boot.
> and those data/func are not used after slab is ready.
> 

>From the look of it this ranges from about 7-19K, so I'm going to take
this and we can optimize this later.

	-hpa

[tip:x86/memblock] memblock: Remove memblock_memory_can_coalesce()

[tip-bot for Tejun Heo]

Commit-ID:  ed7b56a799cade11f458cd83e1150af54a66b7e8
Gitweb:     http://git.kernel.org/tip/ed7b56a799cade11f458cd83e1150af54a66b7e8
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:15:54 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:40 -0700

memblock: Remove memblock_memory_can_coalesce()

Arch could implement memblock_memor_can_coalesce() to veto merging of
adjacent or overlapping memblock regions; however, no arch did and any
vetoing would trigger WARN_ON().  Memblock regions are supposed to
deal with proper memory anyway.  Remove the unused hook.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-2-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 include/linux/memblock.h |    4 ----
 mm/memblock.c            |   29 -----------------------------
 2 files changed, 0 insertions(+), 33 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 7400d02..aa5df9e 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -92,10 +92,6 @@ extern int memblock_is_region_reserved(phys_addr_t base, phys_addr_t size);
 
 extern void memblock_dump_all(void);
 
-/* Provided by the architecture */
-extern int memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1,
-				   phys_addr_t addr2, phys_addr_t size2);
-
 /**
  * memblock_set_current_limit - Set the current allocation limit to allow
  *                         limiting allocations to what is currently
diff --git a/mm/memblock.c b/mm/memblock.c
index a8edb42..bd3a3a9 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -251,12 +251,6 @@ static int __init_memblock memblock_double_array(struct memblock_type *type)
 	return 0;
 }
 
-extern int __init_memblock __weak memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1,
-					  phys_addr_t addr2, phys_addr_t size2)
-{
-	return 1;
-}
-
 static long __init_memblock memblock_add_region(struct memblock_type *type,
 						phys_addr_t base, phys_addr_t size)
 {
@@ -282,17 +276,6 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		 * of a block.
 		 */
 		if (base < rgn->base && end >= rgn->base) {
-			/* If we can't coalesce, create a new block */
-			if (!memblock_memory_can_coalesce(base, size,
-							  rgn->base,
-							  rgn->size)) {
-				/* Overlap & can't coalesce are mutually
-				 * exclusive, if you do that, be prepared
-				 * for trouble
-				 */
-				WARN_ON(end != rgn->base);
-				goto new_block;
-			}
 			/* We extend the bottom of the block down to our
 			 * base
 			 */
@@ -316,17 +299,6 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		 * top of a block
 		 */
 		if (base <= rend && end >= rend) {
-			/* If we can't coalesce, create a new block */
-			if (!memblock_memory_can_coalesce(rgn->base,
-							  rgn->size,
-							  base, size)) {
-				/* Overlap & can't coalesce are mutually
-				 * exclusive, if you do that, be prepared
-				 * for trouble
-				 */
-				WARN_ON(rend != base);
-				goto new_block;
-			}
 			/* We adjust our base down to enclose the
 			 * original block and destroy it. It will be
 			 * part of our new allocation. Since we've
@@ -349,7 +321,6 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		return 0;
 	}
 
- new_block:
 	/* If we are out of space, we fail. It's too late to resize the array
 	 * but then this shouldn't have happened in the first place.
 	 */

[tip:x86/memblock] memblock: Reimplement memblock_add_region()

[tip-bot for Tejun Heo]

Commit-ID:  784656f9c680d334e7b4cdb6951c5c913e5a26bf
Gitweb:     http://git.kernel.org/tip/784656f9c680d334e7b4cdb6951c5c913e5a26bf
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:15:55 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:41 -0700

memblock: Reimplement memblock_add_region()

memblock_add_region() carefully checked for merge and overlap
conditions while adding a new region, which is complicated and makes
it difficult to allow arbitrary overlaps or add more merge conditions
(e.g. node ID).

This re-implements memblock_add_region() such that insertion is done
in two steps - all non-overlapping portions of new area are inserted
as separate regions first and then memblock_merge_regions() scan and
merge all neighbouring compatible regions.

This makes addition logic simpler and more versatile and enables
adding node information to memblock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-3-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 mm/memblock.c |  197 ++++++++++++++++++++++++++++++++-------------------------
 1 files changed, 111 insertions(+), 86 deletions(-)

diff --git a/mm/memblock.c b/mm/memblock.c
index bd3a3a9..992aa18 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -251,117 +251,142 @@ static int __init_memblock memblock_double_array(struct memblock_type *type)
 	return 0;
 }
 
-static long __init_memblock memblock_add_region(struct memblock_type *type,
-						phys_addr_t base, phys_addr_t size)
+/**
+ * memblock_merge_regions - merge neighboring compatible regions
+ * @type: memblock type to scan
+ *
+ * Scan @type and merge neighboring compatible regions.
+ */
+static void __init_memblock memblock_merge_regions(struct memblock_type *type)
 {
-	phys_addr_t end = base + size;
-	int i, slot = -1;
+	int i = 0;
 
-	/* First try and coalesce this MEMBLOCK with others */
-	for (i = 0; i < type->cnt; i++) {
-		struct memblock_region *rgn = &type->regions[i];
-		phys_addr_t rend = rgn->base + rgn->size;
+	/* cnt never goes below 1 */
+	while (i < type->cnt - 1) {
+		struct memblock_region *this = &type->regions[i];
+		struct memblock_region *next = &type->regions[i + 1];
 
-		/* Exit if there's no possible hits */
-		if (rgn->base > end || rgn->size == 0)
-			break;
-
-		/* Check if we are fully enclosed within an existing
-		 * block
-		 */
-		if (rgn->base <= base && rend >= end)
-			return 0;
+		if (this->base + this->size != next->base) {
+			BUG_ON(this->base + this->size > next->base);
+			i++;
+			continue;
+		}
 
-		/* Check if we overlap or are adjacent with the bottom
-		 * of a block.
-		 */
-		if (base < rgn->base && end >= rgn->base) {
-			/* We extend the bottom of the block down to our
-			 * base
-			 */
-			rgn->base = base;
-			rgn->size = rend - base;
+		this->size += next->size;
+		memmove(next, next + 1, (type->cnt - (i + 1)) * sizeof(*next));
+		type->cnt--;
+	}
+}
 
-			/* Return if we have nothing else to allocate
-			 * (fully coalesced)
-			 */
-			if (rend >= end)
-				return 0;
+/**
+ * memblock_insert_region - insert new memblock region
+ * @type: memblock type to insert into
+ * @idx: index for the insertion point
+ * @base: base address of the new region
+ * @size: size of the new region
+ *
+ * Insert new memblock region [@base,@base+@size) into @type at @idx.
+ * @type must already have extra room to accomodate the new region.
+ */
+static void __init_memblock memblock_insert_region(struct memblock_type *type,
+						   int idx, phys_addr_t base,
+						   phys_addr_t size)
+{
+	struct memblock_region *rgn = &type->regions[idx];
 
-			/* We continue processing from the end of the
-			 * coalesced block.
-			 */
-			base = rend;
-			size = end - base;
-		}
+	BUG_ON(type->cnt >= type->max);
+	memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn));
+	rgn->base = base;
+	rgn->size = size;
+	type->cnt++;
+}
 
-		/* Now check if we overlap or are adjacent with the
-		 * top of a block
-		 */
-		if (base <= rend && end >= rend) {
-			/* We adjust our base down to enclose the
-			 * original block and destroy it. It will be
-			 * part of our new allocation. Since we've
-			 * freed an entry, we know we won't fail
-			 * to allocate one later, so we won't risk
-			 * losing the original block allocation.
-			 */
-			size += (base - rgn->base);
-			base = rgn->base;
-			memblock_remove_region(type, i--);
-		}
-	}
+/**
+ * memblock_add_region - add new memblock region
+ * @type: memblock type to add new region into
+ * @base: base address of the new region
+ * @size: size of the new region
+ *
+ * Add new memblock region [@base,@base+@size) into @type.  The new region
+ * is allowed to overlap with existing ones - overlaps don't affect already
+ * existing regions.  @type is guaranteed to be minimal (all neighbouring
+ * compatible regions are merged) after the addition.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static long __init_memblock memblock_add_region(struct memblock_type *type,
+						phys_addr_t base, phys_addr_t size)
+{
+	bool insert = false;
+	phys_addr_t obase = base, end = base + size;
+	int i, nr_new;
 
-	/* If the array is empty, special case, replace the fake
-	 * filler region and return
-	 */
-	if ((type->cnt == 1) && (type->regions[0].size == 0)) {
+	/* special case for empty array */
+	if (type->regions[0].size == 0) {
+		WARN_ON(type->cnt != 1);
 		type->regions[0].base = base;
 		type->regions[0].size = size;
 		return 0;
 	}
-
-	/* If we are out of space, we fail. It's too late to resize the array
-	 * but then this shouldn't have happened in the first place.
+repeat:
+	/*
+	 * The following is executed twice.  Once with %false @insert and
+	 * then with %true.  The first counts the number of regions needed
+	 * to accomodate the new area.  The second actually inserts them.
 	 */
-	if (WARN_ON(type->cnt >= type->max))
-		return -1;
+	base = obase;
+	nr_new = 0;
+
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		phys_addr_t rbase = rgn->base;
+		phys_addr_t rend = rbase + rgn->size;
 
-	/* Couldn't coalesce the MEMBLOCK, so add it to the sorted table. */
-	for (i = type->cnt - 1; i >= 0; i--) {
-		if (base < type->regions[i].base) {
-			type->regions[i+1].base = type->regions[i].base;
-			type->regions[i+1].size = type->regions[i].size;
-		} else {
-			type->regions[i+1].base = base;
-			type->regions[i+1].size = size;
-			slot = i + 1;
+		if (rbase >= end)
 			break;
+		if (rend <= base)
+			continue;
+		/*
+		 * @rgn overlaps.  If it separates the lower part of new
+		 * area, insert that portion.
+		 */
+		if (rbase > base) {
+			nr_new++;
+			if (insert)
+				memblock_insert_region(type, i++, base,
+						       rbase - base);
 		}
+		/* area below @rend is dealt with, forget about it */
+		base = min(rend, end);
 	}
-	if (base < type->regions[0].base) {
-		type->regions[0].base = base;
-		type->regions[0].size = size;
-		slot = 0;
+
+	/* insert the remaining portion */
+	if (base < end) {
+		nr_new++;
+		if (insert)
+			memblock_insert_region(type, i, base, end - base);
 	}
-	type->cnt++;
 
-	/* The array is full ? Try to resize it. If that fails, we undo
-	 * our allocation and return an error
+	/*
+	 * If this was the first round, resize array and repeat for actual
+	 * insertions; otherwise, merge and return.
 	 */
-	if (type->cnt == type->max && memblock_double_array(type)) {
-		BUG_ON(slot < 0);
-		memblock_remove_region(type, slot);
-		return -1;
+	if (!insert) {
+		while (type->cnt + nr_new > type->max)
+			if (memblock_double_array(type) < 0)
+				return -ENOMEM;
+		insert = true;
+		goto repeat;
+	} else {
+		memblock_merge_regions(type);
+		return 0;
 	}
-
-	return 0;
 }
 
 long __init_memblock memblock_add(phys_addr_t base, phys_addr_t size)
 {
 	return memblock_add_region(&memblock.memory, base, size);
-
 }
 
 static long __init_memblock __memblock_remove(struct memblock_type *type,

[tip:x86/memblock] memblock: Use __meminit[data] instead of __init[data]

[tip-bot for Tejun Heo]

Commit-ID:  67e24bcb725cabd15ef577bf301275d03d6086d7
Gitweb:     http://git.kernel.org/tip/67e24bcb725cabd15ef577bf301275d03d6086d7
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Thu, 14 Jul 2011 11:42:03 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:42 -0700

memblock: Use __meminit[data] instead of __init[data]

>From 19ab281ed67b87a6623d725237a7333ca79f1e75 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

memblock will be extended to include early_node_map[], which is also
used during memory hotplug.  Make memblock use __meminit[data] instead
of __init[data] so that memory hotplug code can safely reference it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094203.GE3455@htj.dyndns.org
Reported-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 include/linux/memblock.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index aa5df9e..434b958 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -152,8 +152,8 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
 
 
 #ifdef ARCH_DISCARD_MEMBLOCK
-#define __init_memblock __init
-#define __initdata_memblock __initdata
+#define __init_memblock __meminit
+#define __initdata_memblock __meminitdata
 #else
 #define __init_memblock
 #define __initdata_memblock

[tip:x86/memblock] memblock: Add optional region->nid

[tip-bot for Tejun Heo]

Commit-ID:  7c0caeb866b0f648d91bb75b8bc6f86af95bb033
Gitweb:     http://git.kernel.org/tip/7c0caeb866b0f648d91bb75b8bc6f86af95bb033
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Thu, 14 Jul 2011 11:43:42 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:43 -0700

memblock: Add optional region->nid

>From 83103b92f3234ec830852bbc5c45911bd6cbdb20 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

Add optional region->nid which can be enabled by arch using
CONFIG_HAVE_MEMBLOCK_NODE_MAP.  When enabled, memblock also carries
NUMA node information and replaces early_node_map[].

Newly added memblocks have MAX_NUMNODES as nid.  Arch can then call
memblock_set_node() to set node information.  memblock takes care of
merging and node affine allocations w.r.t. node information.

When MEMBLOCK_NODE_MAP is enabled, early_node_map[], related data
structures and functions to manipulate and iterate it are disabled.
memblock version of __next_mem_pfn_range() is provided such that
for_each_mem_pfn_range() behaves the same and its users don't have to
be updated.

-v2: Yinghai spotted section mismatch caused by missing
     __init_memblock in memblock_set_node().  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094342.GF3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 include/linux/memblock.h |   26 ++++++++
 include/linux/mm.h       |    2 +
 mm/Kconfig               |    3 +
 mm/memblock.c            |  142 ++++++++++++++++++++++++++++++++++++++++------
 mm/page_alloc.c          |   47 +++++++++------
 5 files changed, 183 insertions(+), 37 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 434b958..c36a55d 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -24,6 +24,9 @@
 struct memblock_region {
 	phys_addr_t base;
 	phys_addr_t size;
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+	int nid;
+#endif
 };
 
 struct memblock_type {
@@ -58,6 +61,29 @@ extern long memblock_remove(phys_addr_t base, phys_addr_t size);
 extern long memblock_free(phys_addr_t base, phys_addr_t size);
 extern long memblock_reserve(phys_addr_t base, phys_addr_t size);
 
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+extern int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid);
+
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+	r->nid = nid;
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return r->nid;
+}
+#else
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return 0;
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
 /* The numa aware allocator is only available if
  * CONFIG_ARCH_POPULATES_NODE_MAP is set
  */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 9ebc65a..ceb1e4a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1307,12 +1307,14 @@ extern void free_area_init_node(int nid, unsigned long * zones_size,
  * CONFIG_ARCH_POPULATES_NODE_MAP
  */
 extern void free_area_init_nodes(unsigned long *max_zone_pfn);
+#ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 extern void add_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
 extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
 extern void remove_all_active_ranges(void);
 void sort_node_map(void);
+#endif
 unsigned long node_map_pfn_alignment(void);
 unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn,
 						unsigned long end_pfn);
diff --git a/mm/Kconfig b/mm/Kconfig
index 8ca47a5..30a5d47 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -131,6 +131,9 @@ config SPARSEMEM_VMEMMAP
 config HAVE_MEMBLOCK
 	boolean
 
+config HAVE_MEMBLOCK_NODE_MAP
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/memblock.c b/mm/memblock.c
index 992aa18..e815f4b 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -161,12 +161,8 @@ int __init_memblock memblock_reserve_reserved_regions(void)
 
 static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
 {
-	unsigned long i;
-
-	for (i = r; i < type->cnt - 1; i++) {
-		type->regions[i].base = type->regions[i + 1].base;
-		type->regions[i].size = type->regions[i + 1].size;
-	}
+	memmove(&type->regions[r], &type->regions[r + 1],
+		(type->cnt - (r + 1)) * sizeof(type->regions[r]));
 	type->cnt--;
 
 	/* Special case for empty arrays */
@@ -174,6 +170,7 @@ static void __init_memblock memblock_remove_region(struct memblock_type *type, u
 		type->cnt = 1;
 		type->regions[0].base = 0;
 		type->regions[0].size = 0;
+		memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
 	}
 }
 
@@ -266,7 +263,9 @@ static void __init_memblock memblock_merge_regions(struct memblock_type *type)
 		struct memblock_region *this = &type->regions[i];
 		struct memblock_region *next = &type->regions[i + 1];
 
-		if (this->base + this->size != next->base) {
+		if (this->base + this->size != next->base ||
+		    memblock_get_region_node(this) !=
+		    memblock_get_region_node(next)) {
 			BUG_ON(this->base + this->size > next->base);
 			i++;
 			continue;
@@ -290,7 +289,7 @@ static void __init_memblock memblock_merge_regions(struct memblock_type *type)
  */
 static void __init_memblock memblock_insert_region(struct memblock_type *type,
 						   int idx, phys_addr_t base,
-						   phys_addr_t size)
+						   phys_addr_t size, int nid)
 {
 	struct memblock_region *rgn = &type->regions[idx];
 
@@ -298,6 +297,7 @@ static void __init_memblock memblock_insert_region(struct memblock_type *type,
 	memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn));
 	rgn->base = base;
 	rgn->size = size;
+	memblock_set_region_node(rgn, nid);
 	type->cnt++;
 }
 
@@ -327,6 +327,7 @@ static long __init_memblock memblock_add_region(struct memblock_type *type,
 		WARN_ON(type->cnt != 1);
 		type->regions[0].base = base;
 		type->regions[0].size = size;
+		memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
 		return 0;
 	}
 repeat:
@@ -355,7 +356,7 @@ repeat:
 			nr_new++;
 			if (insert)
 				memblock_insert_region(type, i++, base,
-						       rbase - base);
+						rbase - base, MAX_NUMNODES);
 		}
 		/* area below @rend is dealt with, forget about it */
 		base = min(rend, end);
@@ -365,7 +366,8 @@ repeat:
 	if (base < end) {
 		nr_new++;
 		if (insert)
-			memblock_insert_region(type, i, base, end - base);
+			memblock_insert_region(type, i, base, end - base,
+					       MAX_NUMNODES);
 	}
 
 	/*
@@ -459,6 +461,101 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 	return memblock_add_region(_rgn, base, size);
 }
 
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+/*
+ * Common iterator interface used to define for_each_mem_range().
+ */
+void __init_memblock __next_mem_pfn_range(int *idx, int nid,
+				unsigned long *out_start_pfn,
+				unsigned long *out_end_pfn, int *out_nid)
+{
+	struct memblock_type *type = &memblock.memory;
+	struct memblock_region *r;
+
+	while (++*idx < type->cnt) {
+		r = &type->regions[*idx];
+
+		if (PFN_UP(r->base) >= PFN_DOWN(r->base + r->size))
+			continue;
+		if (nid == MAX_NUMNODES || nid == r->nid)
+			break;
+	}
+	if (*idx >= type->cnt) {
+		*idx = -1;
+		return;
+	}
+
+	if (out_start_pfn)
+		*out_start_pfn = PFN_UP(r->base);
+	if (out_end_pfn)
+		*out_end_pfn = PFN_DOWN(r->base + r->size);
+	if (out_nid)
+		*out_nid = r->nid;
+}
+
+/**
+ * memblock_set_node - set node ID on memblock regions
+ * @base: base of area to set node ID for
+ * @size: size of area to set node ID for
+ * @nid: node ID to set
+ *
+ * Set the nid of memblock memory regions in [@base,@base+@size) to @nid.
+ * Regions which cross the area boundaries are split as necessary.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init_memblock memblock_set_node(phys_addr_t base, phys_addr_t size,
+				      int nid)
+{
+	struct memblock_type *type = &memblock.memory;
+	phys_addr_t end = base + size;
+	int i;
+
+	/* we'll create at most two more regions */
+	while (type->cnt + 2 > type->max)
+		if (memblock_double_array(type) < 0)
+			return -ENOMEM;
+
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		phys_addr_t rbase = rgn->base;
+		phys_addr_t rend = rbase + rgn->size;
+
+		if (rbase >= end)
+			break;
+		if (rend <= base)
+			continue;
+
+		if (rbase < base) {
+			/*
+			 * @rgn intersects from below.  Split and continue
+			 * to process the next region - the new top half.
+			 */
+			rgn->base = base;
+			rgn->size = rend - rgn->base;
+			memblock_insert_region(type, i, rbase, base - rbase,
+					       rgn->nid);
+		} else if (rend > end) {
+			/*
+			 * @rgn intersects from above.  Split and redo the
+			 * current region - the new bottom half.
+			 */
+			rgn->base = end;
+			rgn->size = rend - rgn->base;
+			memblock_insert_region(type, i--, rbase, end - rbase,
+					       rgn->nid);
+		} else {
+			/* @rgn is fully contained, set ->nid */
+			rgn->nid = nid;
+		}
+	}
+
+	memblock_merge_regions(type);
+	return 0;
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
 phys_addr_t __init __memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr)
 {
 	phys_addr_t found;
@@ -689,19 +786,26 @@ void __init_memblock memblock_set_current_limit(phys_addr_t limit)
 	memblock.current_limit = limit;
 }
 
-static void __init_memblock memblock_dump(struct memblock_type *region, char *name)
+static void __init_memblock memblock_dump(struct memblock_type *type, char *name)
 {
 	unsigned long long base, size;
 	int i;
 
-	pr_info(" %s.cnt  = 0x%lx\n", name, region->cnt);
-
-	for (i = 0; i < region->cnt; i++) {
-		base = region->regions[i].base;
-		size = region->regions[i].size;
+	pr_info(" %s.cnt  = 0x%lx\n", name, type->cnt);
 
-		pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes\n",
-		    name, i, base, base + size - 1, size);
+	for (i = 0; i < type->cnt; i++) {
+		struct memblock_region *rgn = &type->regions[i];
+		char nid_buf[32] = "";
+
+		base = rgn->base;
+		size = rgn->size;
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+		if (memblock_get_region_node(rgn) != MAX_NUMNODES)
+			snprintf(nid_buf, sizeof(nid_buf), " on node %d",
+				 memblock_get_region_node(rgn));
+#endif
+		pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes%s\n",
+			name, i, base, base + size - 1, size, nid_buf);
 	}
 }
 
@@ -759,11 +863,13 @@ void __init memblock_init(void)
 	 */
 	memblock.memory.regions[0].base = 0;
 	memblock.memory.regions[0].size = 0;
+	memblock_set_region_node(&memblock.memory.regions[0], MAX_NUMNODES);
 	memblock.memory.cnt = 1;
 
 	/* Ditto. */
 	memblock.reserved.regions[0].base = 0;
 	memblock.reserved.regions[0].size = 0;
+	memblock_set_region_node(&memblock.reserved.regions[0], MAX_NUMNODES);
 	memblock.reserved.cnt = 1;
 
 	memblock.current_limit = MEMBLOCK_ALLOC_ANYWHERE;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8ab5e5e..3c7ea45 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -182,28 +182,31 @@ static unsigned long __meminitdata nr_all_pages;
 static unsigned long __meminitdata dma_reserve;
 
 #ifdef CONFIG_ARCH_POPULATES_NODE_MAP
-  /*
-   * MAX_ACTIVE_REGIONS determines the maximum number of distinct
-   * ranges of memory (RAM) that may be registered with add_active_range().
-   * Ranges passed to add_active_range() will be merged if possible
-   * so the number of times add_active_range() can be called is
-   * related to the number of nodes and the number of holes
-   */
-  #ifdef CONFIG_MAX_ACTIVE_REGIONS
-    /* Allow an architecture to set MAX_ACTIVE_REGIONS to save memory */
-    #define MAX_ACTIVE_REGIONS CONFIG_MAX_ACTIVE_REGIONS
-  #else
-    #if MAX_NUMNODES >= 32
-      /* If there can be many nodes, allow up to 50 holes per node */
-      #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
+  #ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+    /*
+     * MAX_ACTIVE_REGIONS determines the maximum number of distinct ranges
+     * of memory (RAM) that may be registered with add_active_range().
+     * Ranges passed to add_active_range() will be merged if possible so
+     * the number of times add_active_range() can be called is related to
+     * the number of nodes and the number of holes
+     */
+    #ifdef CONFIG_MAX_ACTIVE_REGIONS
+      /* Allow an architecture to set MAX_ACTIVE_REGIONS to save memory */
+      #define MAX_ACTIVE_REGIONS CONFIG_MAX_ACTIVE_REGIONS
     #else
-      /* By default, allow up to 256 distinct regions */
-      #define MAX_ACTIVE_REGIONS 256
+      #if MAX_NUMNODES >= 32
+        /* If there can be many nodes, allow up to 50 holes per node */
+        #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
+      #else
+        /* By default, allow up to 256 distinct regions */
+        #define MAX_ACTIVE_REGIONS 256
+      #endif
     #endif
-  #endif
 
-  static struct node_active_region __meminitdata early_node_map[MAX_ACTIVE_REGIONS];
-  static int __meminitdata nr_nodemap_entries;
+    static struct node_active_region __meminitdata early_node_map[MAX_ACTIVE_REGIONS];
+    static int __meminitdata nr_nodemap_entries;
+#endif /* !CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
   static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
   static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
   static unsigned long __initdata required_kernelcore;
@@ -4268,6 +4271,7 @@ static inline void setup_nr_node_ids(void)
 }
 #endif
 
+#ifndef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 /*
  * Common iterator interface used to define for_each_mem_pfn_range().
  */
@@ -4456,6 +4460,11 @@ void __init sort_node_map(void)
 			sizeof(struct node_active_region),
 			cmp_node_active_region, NULL);
 }
+#else /* !CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+static inline void sort_node_map(void)
+{
+}
+#endif
 
 /**
  * node_map_pfn_alignment - determine the maximum internode alignment

[tip:x86/memblock] x86: Use HAVE_MEMBLOCK_NODE_MAP

[tip-bot for Tejun Heo]

Commit-ID:  0608f70c78a384c2f225f2de226ca057a196f108
Gitweb:     http://git.kernel.org/tip/0608f70c78a384c2f225f2de226ca057a196f108
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Thu, 14 Jul 2011 11:44:23 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:43 -0700

x86: Use HAVE_MEMBLOCK_NODE_MAP

>From 5732e1247898d67cbf837585150fe9f68974671d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

Convert x86 to HAVE_MEMBLOCK_NODE_MAP.  The only difference in memory
handling is that allocations can't no longer cross node boundaries
whether they're node affine or not, which shouldn't matter at all.

This conversion will enable further simplification of boot memory
handling.

-v2: Fix build failure on !NUMA configurations discovered by hpa.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094423.GG3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/Kconfig                |    1 +
 arch/x86/include/asm/memblock.h |    2 --
 arch/x86/mm/init_32.c           |    8 ++++----
 arch/x86/mm/init_64.c           |    2 +-
 arch/x86/mm/memblock.c          |   14 --------------
 arch/x86/mm/numa.c              |   15 +++++++--------
 6 files changed, 13 insertions(+), 29 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index da34972..97f0894 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -25,6 +25,7 @@ config X86
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 161792e..1460db2 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -12,8 +12,6 @@ int __get_free_all_memory_range(struct range **range, int nodeid,
 			 unsigned long start_pfn, unsigned long end_pfn);
 int get_free_all_memory_range(struct range **rangep, int nodeid);
 
-void memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn);
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
 u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 29f7c6d..5d173db 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -650,18 +650,18 @@ void __init initmem_init(void)
 	highstart_pfn = highend_pfn = max_pfn;
 	if (max_pfn > max_low_pfn)
 		highstart_pfn = max_low_pfn;
-	memblock_x86_register_active_regions(0, 0, highend_pfn);
-	sparse_memory_present_with_active_regions(0);
 	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
 		pages_to_mb(highend_pfn - highstart_pfn));
 	num_physpages = highend_pfn;
 	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
 #else
-	memblock_x86_register_active_regions(0, 0, max_low_pfn);
-	sparse_memory_present_with_active_regions(0);
 	num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
 #endif
+
+	memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
+	sparse_memory_present_with_active_regions(0);
+
 #ifdef CONFIG_FLATMEM
 	max_mapnr = num_physpages;
 #endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index d865c4a..7fb064c 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -607,7 +607,7 @@ kernel_physical_mapping_init(unsigned long start,
 #ifndef CONFIG_NUMA
 void __init initmem_init(void)
 {
-	memblock_x86_register_active_regions(0, 0, max_pfn);
+	memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
 }
 #endif
 
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index e4569f8..97fbc39 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -283,20 +283,6 @@ static int __init memblock_x86_find_active_region(const struct memblock_region *
 	return 1;
 }
 
-/* Walk the memblock.memory map and register active regions within a node */
-void __init memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn)
-{
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r)
-		if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
-					   &ei_startpfn, &ei_endpfn))
-			add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
 /*
  * Find the hole size (in bytes) in the memory range.
  * @start: starting address of the memory range to scan
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 824efad..f4a40bd 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -498,13 +498,10 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 	if (WARN_ON(nodes_empty(node_possible_map)))
 		return -EINVAL;
 
-	for (i = 0; i < mi->nr_blks; i++)
-		memblock_x86_register_active_regions(mi->blk[i].nid,
-					mi->blk[i].start >> PAGE_SHIFT,
-					mi->blk[i].end >> PAGE_SHIFT);
-
-	/* for out of order entries */
-	sort_node_map();
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *mb = &mi->blk[i];
+		memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
+	}
 
 	/*
 	 * If sections array is gonna be used for pfn -> nid mapping, check
@@ -538,6 +535,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			setup_node_data(nid, start, end);
 	}
 
+	/* Dump memblock with node info and return. */
+	memblock_dump_all();
 	return 0;
 }
 
@@ -575,7 +574,7 @@ static int __init numa_init(int (*init_func)(void))
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	remove_all_active_ranges();
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
 	numa_reset_distance();
 
 	ret = init_func();

[tip:x86/memblock] x86: Use __memblock_alloc_base() in early_reserve_e820()

[tip-bot for Tejun Heo]

Commit-ID:  ab5d140b9eafae402aa3e673a63c5ef6164a9dd2
Gitweb:     http://git.kernel.org/tip/ab5d140b9eafae402aa3e673a63c5ef6164a9dd2
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:15:58 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:47 -0700

x86: Use __memblock_alloc_base() in early_reserve_e820()

early_reserve_e820() implements its own ad-hoc early allocator using
memblock_x86_find_in_range_size().  Use __memblock_alloc_base()
instead and remove the unnecessary @startt parameter (it's top-down
allocation anyway).

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-6-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/e820.h |    2 +-
 arch/x86/kernel/e820.c      |   30 ++++++------------------------
 arch/x86/kernel/mpparse.c   |    6 ++----
 3 files changed, 9 insertions(+), 29 deletions(-)

diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 908b969..3778256 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -117,7 +117,7 @@ static inline void early_memtest(unsigned long start, unsigned long end)
 
 extern unsigned long e820_end_of_ram_pfn(void);
 extern unsigned long e820_end_of_low_ram_pfn(void);
-extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+extern u64 early_reserve_e820(u64 sizet, u64 align);
 
 void memblock_x86_fill(void);
 void memblock_find_dma_reserve(void);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 0f9ff58..b99d940 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -737,35 +737,17 @@ core_initcall(e820_mark_nvs_memory);
 /*
  * pre allocated 4k and reserved it in memblock and e820_saved
  */
-u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
+u64 __init early_reserve_e820(u64 size, u64 align)
 {
-	u64 size = 0;
 	u64 addr;
-	u64 start;
 
-	for (start = startt; ; start += size) {
-		start = memblock_x86_find_in_range_size(start, &size, align);
-		if (!start)
-			return 0;
-		if (size >= sizet)
-			break;
+	addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
+	if (addr) {
+		e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED);
+		printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
+		update_e820_saved();
 	}
 
-#ifdef CONFIG_X86_32
-	if (start >= MAXMEM)
-		return 0;
-	if (start + size > MAXMEM)
-		size = MAXMEM - start;
-#endif
-
-	addr = round_down(start + size - sizet, align);
-	if (addr < start)
-		return 0;
-	memblock_x86_reserve_range(addr, addr + sizet, "new next");
-	e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
-	printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
-	update_e820_saved();
-
 	return addr;
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 9103b89..8faeaa0 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -836,10 +836,8 @@ early_param("alloc_mptable", parse_alloc_mptable_opt);
 
 void __init early_reserve_e820_mpc_new(void)
 {
-	if (enable_update_mptable && alloc_mptable) {
-		u64 startt = 0;
-		mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
-	}
+	if (enable_update_mptable && alloc_mptable)
+		mpc_new_phys = early_reserve_e820(mpc_new_length, 4);
 }
 
 static int __init update_mp_table(void)

[tip:x86/memblock] memblock: Implement for_each_free_mem_range()

[tip-bot for Tejun Heo]

Commit-ID:  35fd0808d7d8d001cd72f112e3bca84664b596a3
Gitweb:     http://git.kernel.org/tip/35fd0808d7d8d001cd72f112e3bca84664b596a3
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:15:59 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:47 -0700

memblock: Implement for_each_free_mem_range()

Implement for_each_free_mem_range() which iterates over free memory
areas according to memblock (memory && !reserved).  This will be used
to simplify memblock users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-7-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 include/linux/memblock.h |   20 ++++++++++++
 mm/memblock.c            |   76 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 96 insertions(+), 0 deletions(-)

diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index c36a55d..31def58 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -61,6 +61,26 @@ extern long memblock_remove(phys_addr_t base, phys_addr_t size);
 extern long memblock_free(phys_addr_t base, phys_addr_t size);
 extern long memblock_reserve(phys_addr_t base, phys_addr_t size);
 
+extern void __next_free_mem_range(u64 *idx, int nid, phys_addr_t *out_start,
+				  phys_addr_t *out_end, int *out_nid);
+
+/**
+ * for_each_free_mem_range - iterate through free memblock areas
+ * @i: u64 used as loop variable
+ * @nid: node selector, %MAX_NUMNODES for all nodes
+ * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @p_nid: ptr to int for nid of the range, can be %NULL
+ *
+ * Walks over free (memory && !reserved) areas of memblock.  Available as
+ * soon as memblock is initialized.
+ */
+#define for_each_free_mem_range(i, nid, p_start, p_end, p_nid)		\
+	for (i = 0,							\
+	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid);	\
+	     i != (u64)ULLONG_MAX;					\
+	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid))
+
 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 extern int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid);
 
diff --git a/mm/memblock.c b/mm/memblock.c
index e815f4b..c4a8750 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -461,6 +461,82 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 	return memblock_add_region(_rgn, base, size);
 }
 
+/**
+ * __next_free_mem_range - next function for for_each_free_mem_range()
+ * @idx: pointer to u64 loop variable
+ * @nid: nid: node selector, %MAX_NUMNODES for all nodes
+ * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @p_nid: ptr to int for nid of the range, can be %NULL
+ *
+ * Find the first free area from *@idx which matches @nid, fill the out
+ * parameters, and update *@idx for the next iteration.  The lower 32bit of
+ * *@idx contains index into memory region and the upper 32bit indexes the
+ * areas before each reserved region.  For example, if reserved regions
+ * look like the following,
+ *
+ *	0:[0-16), 1:[32-48), 2:[128-130)
+ *
+ * The upper 32bit indexes the following regions.
+ *
+ *	0:[0-0), 1:[16-32), 2:[48-128), 3:[130-MAX)
+ *
+ * As both region arrays are sorted, the function advances the two indices
+ * in lockstep and returns each intersection.
+ */
+void __init_memblock __next_free_mem_range(u64 *idx, int nid,
+					   phys_addr_t *out_start,
+					   phys_addr_t *out_end, int *out_nid)
+{
+	struct memblock_type *mem = &memblock.memory;
+	struct memblock_type *rsv = &memblock.reserved;
+	int mi = *idx & 0xffffffff;
+	int ri = *idx >> 32;
+
+	for ( ; mi < mem->cnt; mi++) {
+		struct memblock_region *m = &mem->regions[mi];
+		phys_addr_t m_start = m->base;
+		phys_addr_t m_end = m->base + m->size;
+
+		/* only memory regions are associated with nodes, check it */
+		if (nid != MAX_NUMNODES && nid != memblock_get_region_node(m))
+			continue;
+
+		/* scan areas before each reservation for intersection */
+		for ( ; ri < rsv->cnt + 1; ri++) {
+			struct memblock_region *r = &rsv->regions[ri];
+			phys_addr_t r_start = ri ? r[-1].base + r[-1].size : 0;
+			phys_addr_t r_end = ri < rsv->cnt ? r->base : ULLONG_MAX;
+
+			/* if ri advanced past mi, break out to advance mi */
+			if (r_start >= m_end)
+				break;
+			/* if the two regions intersect, we're done */
+			if (m_start < r_end) {
+				if (out_start)
+					*out_start = max(m_start, r_start);
+				if (out_end)
+					*out_end = min(m_end, r_end);
+				if (out_nid)
+					*out_nid = memblock_get_region_node(m);
+				/*
+				 * The region which ends first is advanced
+				 * for the next iteration.
+				 */
+				if (m_end <= r_end)
+					mi++;
+				else
+					ri++;
+				*idx = (u32)mi | (u64)ri << 32;
+				return;
+			}
+		}
+	}
+
+	/* signal end of iteration */
+	*idx = ULLONG_MAX;
+}
+
 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 /*
  * Common iterator interface used to define for_each_mem_range().

[tip:x86/memblock] x86: Replace memblock_x86_find_in_range_size() with for_each_free_mem_range()

[tip-bot for Tejun Heo]

Commit-ID:  8d89ac808417e92a33fb5fa3c86352016643775a
Gitweb:     http://git.kernel.org/tip/8d89ac808417e92a33fb5fa3c86352016643775a
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:16:00 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:48 -0700

x86: Replace memblock_x86_find_in_range_size() with for_each_free_mem_range()

setup_bios_corruption_check() and memtest do_one_pass() open code
memblock free area iteration using memblock_x86_find_in_range_size().
Convert them to use for_each_free_mem_range() instead.

This leaves memblock_x86_find_in_range_size() and
memblock_x86_check_reserved_size() unused.  Kill them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-8-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/memblock.h |    3 --
 arch/x86/kernel/check.c         |   34 +++++++++------------
 arch/x86/mm/memblock.c          |   62 ---------------------------------------
 arch/x86/mm/memtest.c           |   31 ++++++++-----------
 4 files changed, 28 insertions(+), 102 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 1460db2..d2a5a59 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -3,8 +3,6 @@
 
 #define ARCH_DISCARD_MEMBLOCK
 
-u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align);
-
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 struct range;
@@ -15,6 +13,5 @@ int get_free_all_memory_range(struct range **rangep, int nodeid);
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
 u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
-bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align);
 
 #endif
diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index 95680fc..621cd23 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -62,7 +62,8 @@ early_param("memory_corruption_check_size", set_corruption_check_size);
 
 void __init setup_bios_corruption_check(void)
 {
-	u64 addr = PAGE_SIZE;	/* assume first page is reserved anyway */
+	phys_addr_t start, end;
+	u64 i;
 
 	if (memory_corruption_check == -1) {
 		memory_corruption_check =
@@ -82,28 +83,23 @@ void __init setup_bios_corruption_check(void)
 
 	corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
 
-	while (addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
-		u64 size;
-		addr = memblock_x86_find_in_range_size(addr, &size, PAGE_SIZE);
+	for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
+		start = clamp_t(phys_addr_t, round_up(start, PAGE_SIZE),
+				PAGE_SIZE, corruption_check_size);
+		end = clamp_t(phys_addr_t, round_down(end, PAGE_SIZE),
+			      PAGE_SIZE, corruption_check_size);
+		if (start >= end)
+			continue;
 
-		if (!addr)
-			break;
-
-		if (addr >= corruption_check_size)
-			break;
-
-		if ((addr + size) > corruption_check_size)
-			size = corruption_check_size - addr;
-
-		memblock_x86_reserve_range(addr, addr + size, "SCAN RAM");
-		scan_areas[num_scan_areas].addr = addr;
-		scan_areas[num_scan_areas].size = size;
-		num_scan_areas++;
+		memblock_x86_reserve_range(start, end, "SCAN RAM");
+		scan_areas[num_scan_areas].addr = start;
+		scan_areas[num_scan_areas].size = end - start;
 
 		/* Assume we've already mapped this early memory */
-		memset(__va(addr), 0, size);
+		memset(__va(start), 0, end - start);
 
-		addr += size;
+		if (++num_scan_areas >= MAX_SCAN_AREAS)
+			break;
 	}
 
 	if (num_scan_areas)
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 97fbc39..648d47d 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -7,68 +7,6 @@
 #include <linux/mm.h>
 #include <linux/range.h>
 
-/* Check for already reserved areas */
-bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align)
-{
-	struct memblock_region *r;
-	u64 addr = *addrp, last;
-	u64 size = *sizep;
-	bool changed = false;
-
-again:
-	last = addr + size;
-	for_each_memblock(reserved, r) {
-		if (last > r->base && addr < r->base) {
-			size = r->base - addr;
-			changed = true;
-			goto again;
-		}
-		if (last > (r->base + r->size) && addr < (r->base + r->size)) {
-			addr = round_up(r->base + r->size, align);
-			size = last - addr;
-			changed = true;
-			goto again;
-		}
-		if (last <= (r->base + r->size) && addr >= r->base) {
-			*sizep = 0;
-			return false;
-		}
-	}
-	if (changed) {
-		*addrp = addr;
-		*sizep = size;
-	}
-	return changed;
-}
-
-/*
- * Find next free range after start, and size is returned in *sizep
- */
-u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align)
-{
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r) {
-		u64 ei_start = r->base;
-		u64 ei_last = ei_start + r->size;
-		u64 addr;
-
-		addr = round_up(ei_start, align);
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		*sizep = ei_last - addr;
-		while (memblock_x86_check_reserved_size(&addr, sizep, align))
-			;
-
-		if (*sizep)
-			return addr;
-	}
-
-	return 0;
-}
-
 static __init struct range *find_range_array(int count)
 {
 	u64 end, size, mem;
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 92faf3a..46a5ff2 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -70,24 +70,19 @@ static void __init memtest(u64 pattern, u64 start_phys, u64 size)
 
 static void __init do_one_pass(u64 pattern, u64 start, u64 end)
 {
-	u64 size = 0;
-
-	while (start < end) {
-		start = memblock_x86_find_in_range_size(start, &size, 1);
-
-		/* done ? */
-		if (start >= end)
-			break;
-		if (start + size > end)
-			size = end - start;
-
-		printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
-		       (unsigned long long) start,
-		       (unsigned long long) start + size,
-		       (unsigned long long) cpu_to_be64(pattern));
-		memtest(pattern, start, size);
-
-		start += size;
+	u64 i;
+	phys_addr_t this_start, this_end;
+
+	for_each_free_mem_range(i, MAX_NUMNODES, &this_start, &this_end, NULL) {
+		this_start = clamp_t(phys_addr_t, this_start, start, end);
+		this_end = clamp_t(phys_addr_t, this_end, start, end);
+		if (this_start < this_end) {
+			printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
+			       (unsigned long long)this_start,
+			       (unsigned long long)this_end,
+			       (unsigned long long)cpu_to_be64(pattern));
+			memtest(pattern, this_start, this_end - this_start);
+		}
 	}
 }
 

[tip:x86/memblock] memblock, x86: Make free_all_memory_core_early() explicitly free lowmem only

[tip-bot for Tejun Heo]

Commit-ID:  64a02daacbc880bac1d6b3aeefbcd226a9341fa7
Gitweb:     http://git.kernel.org/tip/64a02daacbc880bac1d6b3aeefbcd226a9341fa7
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:16:01 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:49 -0700

memblock, x86: Make free_all_memory_core_early() explicitly free lowmem only

nomemblock is currently used only by x86 and on x86_32
free_all_memory_core_early() silently freed only the low mem because
get_free_all_memory_range() in arch/x86/mm/memblock.c implicitly
limited range to max_low_pfn.

Rename free_all_memory_core_early() to free_low_memory_core_early()
and make it call __get_free_all_memory_range() and limit the range to
max_low_pfn explicitly.  This makes things clearer and also is
consistent with the bootmem behavior.

This leaves get_free_all_memory_range() without any user.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-9-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/memblock.h |    1 -
 arch/x86/mm/memblock.c          |   10 ----------
 arch/x86/mm/numa_64.c           |    2 +-
 include/linux/bootmem.h         |    2 +-
 mm/nobootmem.c                  |    8 ++++----
 5 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index d2a5a59..6c72eca 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -8,7 +8,6 @@ void memblock_x86_free_range(u64 start, u64 end);
 struct range;
 int __get_free_all_memory_range(struct range **range, int nodeid,
 			 unsigned long start_pfn, unsigned long end_pfn);
-int get_free_all_memory_range(struct range **rangep, int nodeid);
 
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 648d47d..0e8442a 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -89,16 +89,6 @@ int __init __get_free_all_memory_range(struct range **rangep, int nodeid,
 	return nr_range;
 }
 
-int __init get_free_all_memory_range(struct range **rangep, int nodeid)
-{
-	unsigned long end_pfn = -1UL;
-
-#ifdef CONFIG_X86_32
-	end_pfn = max_low_pfn;
-#endif
-	return __get_free_all_memory_range(rangep, nodeid, 0, end_pfn);
-}
-
 static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
 {
 	int i, count;
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index dd27f40..92e2711 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -19,7 +19,7 @@ unsigned long __init numa_free_all_bootmem(void)
 	for_each_online_node(i)
 		pages += free_all_bootmem_node(NODE_DATA(i));
 
-	pages += free_all_memory_core_early(MAX_NUMNODES);
+	pages += free_low_memory_core_early(MAX_NUMNODES);
 
 	return pages;
 }
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index ab344a5..66d3e95 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -44,7 +44,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat,
 				       unsigned long endpfn);
 extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
 
-unsigned long free_all_memory_core_early(int nodeid);
+extern unsigned long free_low_memory_core_early(int nodeid);
 extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
 extern unsigned long free_all_bootmem(void);
 
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index c781626..2037a8a 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -106,7 +106,7 @@ static void __init __free_pages_memory(unsigned long start, unsigned long end)
 		__free_pages_bootmem(pfn_to_page(i), 0);
 }
 
-unsigned long __init free_all_memory_core_early(int nodeid)
+unsigned long __init free_low_memory_core_early(int nodeid)
 {
 	int i;
 	u64 start, end;
@@ -114,7 +114,7 @@ unsigned long __init free_all_memory_core_early(int nodeid)
 	struct range *range = NULL;
 	int nr_range;
 
-	nr_range = get_free_all_memory_range(&range, nodeid);
+	nr_range = __get_free_all_memory_range(&range, nodeid, 0, max_low_pfn);
 
 	for (i = 0; i < nr_range; i++) {
 		start = range[i].start;
@@ -136,7 +136,7 @@ unsigned long __init free_all_bootmem_node(pg_data_t *pgdat)
 {
 	register_page_bootmem_info_node(pgdat);
 
-	/* free_all_memory_core_early(MAX_NUMNODES) will be called later */
+	/* free_low_memory_core_early(MAX_NUMNODES) will be called later */
 	return 0;
 }
 
@@ -154,7 +154,7 @@ unsigned long __init free_all_bootmem(void)
 	 * Use MAX_NUMNODES will make sure all ranges in early_node_map[]
 	 *  will be used instead of only Node0 related
 	 */
-	return free_all_memory_core_early(MAX_NUMNODES);
+	return free_low_memory_core_early(MAX_NUMNODES);
 }
 
 /**

[tip:x86/memblock] memblock, x86: Replace __get_free_all_memory_range() with for_each_free_mem_range()

[tip-bot for Tejun Heo]

Commit-ID:  8a9ca34c11e1695dab7aff3cfa7780fbfe76b2f8
Gitweb:     http://git.kernel.org/tip/8a9ca34c11e1695dab7aff3cfa7780fbfe76b2f8
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:16:02 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:49 -0700

memblock, x86: Replace __get_free_all_memory_range() with for_each_free_mem_range()

__get_free_all_memory_range() walks memblock, calculates free memory
areas and fills in the specified range.  It can be easily replaced
with for_each_free_mem_range().

Convert free_low_memory_core_early() and
add_highpages_with_active_regions() to for_each_free_mem_range().
This leaves __get_free_all_memory_range() without any user.  Kill it
and related functions.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-10-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/memblock.h |    3 --
 arch/x86/mm/init_32.c           |   28 +++++++-----------
 arch/x86/mm/memblock.c          |   59 ---------------------------------------
 mm/nobootmem.c                  |   28 ++++++++++--------
 4 files changed, 27 insertions(+), 91 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 6c72eca..bc9e44b 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -5,9 +5,6 @@
 
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
-struct range;
-int __get_free_all_memory_range(struct range **range, int nodeid,
-			 unsigned long start_pfn, unsigned long end_pfn);
 
 u64 memblock_x86_hole_size(u64 start, u64 end);
 u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 5d173db..0c1da39 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -427,23 +427,17 @@ static void __init add_one_highpage_init(struct page *page)
 void __init add_highpages_with_active_regions(int nid,
 			 unsigned long start_pfn, unsigned long end_pfn)
 {
-	struct range *range;
-	int nr_range;
-	int i;
-
-	nr_range = __get_free_all_memory_range(&range, nid, start_pfn, end_pfn);
-
-	for (i = 0; i < nr_range; i++) {
-		struct page *page;
-		int node_pfn;
-
-		for (node_pfn = range[i].start; node_pfn < range[i].end;
-		     node_pfn++) {
-			if (!pfn_valid(node_pfn))
-				continue;
-			page = pfn_to_page(node_pfn);
-			add_one_highpage_init(page);
-		}
+	phys_addr_t start, end;
+	u64 i;
+
+	for_each_free_mem_range(i, nid, &start, &end, NULL) {
+		unsigned long pfn = clamp_t(unsigned long, PFN_UP(start),
+					    start_pfn, end_pfn);
+		unsigned long e_pfn = clamp_t(unsigned long, PFN_DOWN(end),
+					      start_pfn, end_pfn);
+		for ( ; pfn < e_pfn; pfn++)
+			if (pfn_valid(pfn))
+				add_one_highpage_init(pfn_to_page(pfn));
 	}
 }
 #else
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 0e8442a..4107c1a 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -30,65 +30,6 @@ static __init struct range *find_range_array(int count)
 	return range;
 }
 
-static void __init memblock_x86_subtract_reserved(struct range *range, int az)
-{
-	u64 final_start, final_end;
-	struct memblock_region *r;
-
-	/* Take out region array itself at first*/
-	memblock_free_reserved_regions();
-
-	memblock_dbg("Subtract (%ld early reservations)\n", memblock.reserved.cnt);
-
-	for_each_memblock(reserved, r) {
-		memblock_dbg("  [%010llx-%010llx]\n", (u64)r->base, (u64)r->base + r->size - 1);
-		final_start = PFN_DOWN(r->base);
-		final_end = PFN_UP(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		subtract_range(range, az, final_start, final_end);
-	}
-
-	/* Put region array back ? */
-	memblock_reserve_reserved_regions();
-}
-
-static int __init count_early_node_map(int nodeid)
-{
-	int i, cnt = 0;
-
-	for_each_mem_pfn_range(i, nodeid, NULL, NULL, NULL)
-		cnt++;
-	return cnt;
-}
-
-int __init __get_free_all_memory_range(struct range **rangep, int nodeid,
-			 unsigned long start_pfn, unsigned long end_pfn)
-{
-	int count;
-	struct range *range;
-	int nr_range;
-
-	count = (memblock.reserved.cnt + count_early_node_map(nodeid)) * 2;
-
-	range = find_range_array(count);
-	nr_range = 0;
-
-	/*
-	 * Use early_node_map[] and memblock.reserved.region to get range array
-	 * at first
-	 */
-	nr_range = add_from_early_node_map(range, count, nr_range, nodeid);
-	subtract_range(range, count, 0, start_pfn);
-	subtract_range(range, count, end_pfn, -1ULL);
-
-	memblock_x86_subtract_reserved(range, count);
-	nr_range = clean_sort_range(range, count);
-
-	*rangep = range;
-	return nr_range;
-}
-
 static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
 {
 	int i, count;
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 2037a8a..7075bc0 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -108,21 +108,25 @@ static void __init __free_pages_memory(unsigned long start, unsigned long end)
 
 unsigned long __init free_low_memory_core_early(int nodeid)
 {
-	int i;
-	u64 start, end;
 	unsigned long count = 0;
-	struct range *range = NULL;
-	int nr_range;
-
-	nr_range = __get_free_all_memory_range(&range, nodeid, 0, max_low_pfn);
-
-	for (i = 0; i < nr_range; i++) {
-		start = range[i].start;
-		end = range[i].end;
-		count += end - start;
-		__free_pages_memory(start, end);
+	phys_addr_t start, end;
+	u64 i;
+
+	/* free reserved array temporarily so that it's treated as free area */
+	memblock_free_reserved_regions();
+
+	for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
+		unsigned long start_pfn = PFN_UP(start);
+		unsigned long end_pfn = min_t(unsigned long,
+					      PFN_DOWN(end), max_low_pfn);
+		if (start_pfn < end_pfn) {
+			__free_pages_memory(start_pfn, end_pfn);
+			count += end_pfn - start_pfn;
+		}
 	}
 
+	/* put region array back? */
+	memblock_reserve_reserved_regions();
 	return count;
 }
 

[tip:x86/memblock] memblock, x86: Reimplement memblock_find_dma_reserve() using iterators

[tip-bot for Tejun Heo]

Commit-ID:  6b5d41a1b97f5529284f16170211b87fd60264c0
Gitweb:     http://git.kernel.org/tip/6b5d41a1b97f5529284f16170211b87fd60264c0
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:16:03 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:50 -0700

memblock, x86: Reimplement memblock_find_dma_reserve() using iterators

memblock_find_dma_reserve() wants to find out how much memory is
reserved under MAX_DMA_PFN.  memblock_x86_memory_[free_]in_range() are
used to find out the amounts of all available and free memory in the
area, which are then subtracted to find out the amount of reservation.

memblock_x86_memblock_[free_]in_range() are implemented using
__memblock_x86_memory_in_range() which builds ranges from memblock and
then count them, which is rather unnecessarily complex.

This patch open codes the counting logic directly in
memblock_find_dma_reserve() using memblock iterators and removes now
unused __memblock_x86_memory_in_range() and find_range_array().

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-11-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/memblock.h |    2 -
 arch/x86/kernel/e820.c          |   25 +++++++++--
 arch/x86/mm/memblock.c          |   87 ---------------------------------------
 3 files changed, 20 insertions(+), 94 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index bc9e44b..a0cc7d6 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -7,7 +7,5 @@ void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 
 u64 memblock_x86_hole_size(u64 start, u64 end);
-u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
-u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
 
 #endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index b99d940..84475f1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1093,15 +1093,30 @@ void __init memblock_x86_fill(void)
 void __init memblock_find_dma_reserve(void)
 {
 #ifdef CONFIG_X86_64
-	u64 free_size_pfn;
-	u64 mem_size_pfn;
+	u64 nr_pages = 0, nr_free_pages = 0;
+	unsigned long start_pfn, end_pfn;
+	phys_addr_t start, end;
+	int i;
+	u64 u;
+
 	/*
 	 * need to find out used area below MAX_DMA_PFN
 	 * need to use memblock to get free size in [0, MAX_DMA_PFN]
 	 * at first, and assume boot_mem will not take below MAX_DMA_PFN
 	 */
-	mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
-	free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
-	set_dma_reserve(mem_size_pfn - free_size_pfn);
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
+		start_pfn = min_t(unsigned long, start_pfn, MAX_DMA_PFN);
+		end_pfn = min_t(unsigned long, end_pfn, MAX_DMA_PFN);
+		nr_pages += end_pfn - start_pfn;
+	}
+
+	for_each_free_mem_range(u, MAX_NUMNODES, &start, &end, NULL) {
+		start_pfn = min_t(unsigned long, PFN_UP(start), MAX_DMA_PFN);
+		end_pfn = min_t(unsigned long, PFN_DOWN(end), MAX_DMA_PFN);
+		if (start_pfn < end_pfn)
+			nr_free_pages += end_pfn - start_pfn;
+	}
+
+	set_dma_reserve(nr_pages - nr_free_pages);
 #endif
 }
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index 4107c1a..a9d0972 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -7,93 +7,6 @@
 #include <linux/mm.h>
 #include <linux/range.h>
 
-static __init struct range *find_range_array(int count)
-{
-	u64 end, size, mem;
-	struct range *range;
-
-	size = sizeof(struct range) * count;
-	end = memblock.current_limit;
-
-	mem = memblock_find_in_range(0, end, size, sizeof(struct range));
-	if (!mem)
-		panic("can not find more space for range array");
-
-	/*
-	 * This range is tempoaray, so don't reserve it, it will not be
-	 * overlapped because We will not alloccate new buffer before
-	 * We discard this one
-	 */
-	range = __va(mem);
-	memset(range, 0, size);
-
-	return range;
-}
-
-static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
-{
-	int i, count;
-	struct range *range;
-	int nr_range;
-	u64 final_start, final_end;
-	u64 free_size;
-	struct memblock_region *r;
-
-	count = (memblock.reserved.cnt + memblock.memory.cnt) * 2;
-
-	range = find_range_array(count);
-	nr_range = 0;
-
-	addr = PFN_UP(addr);
-	limit = PFN_DOWN(limit);
-
-	for_each_memblock(memory, r) {
-		final_start = PFN_UP(r->base);
-		final_end = PFN_DOWN(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		if (final_start >= limit || final_end <= addr)
-			continue;
-
-		nr_range = add_range(range, count, nr_range, final_start, final_end);
-	}
-	subtract_range(range, count, 0, addr);
-	subtract_range(range, count, limit, -1ULL);
-
-	/* Subtract memblock.reserved.region in range ? */
-	if (!get_free)
-		goto sort_and_count_them;
-	for_each_memblock(reserved, r) {
-		final_start = PFN_DOWN(r->base);
-		final_end = PFN_UP(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		if (final_start >= limit || final_end <= addr)
-			continue;
-
-		subtract_range(range, count, final_start, final_end);
-	}
-
-sort_and_count_them:
-	nr_range = clean_sort_range(range, count);
-
-	free_size = 0;
-	for (i = 0; i < nr_range; i++)
-		free_size += range[i].end - range[i].start;
-
-	return free_size << PAGE_SHIFT;
-}
-
-u64 __init memblock_x86_free_memory_in_range(u64 addr, u64 limit)
-{
-	return __memblock_x86_memory_in_range(addr, limit, true);
-}
-
-u64 __init memblock_x86_memory_in_range(u64 addr, u64 limit)
-{
-	return __memblock_x86_memory_in_range(addr, limit, false);
-}
-
 void __init memblock_x86_reserve_range(u64 start, u64 end, char *name)
 {
 	if (start == end)

[tip:x86/memblock] x86: Use absent_pages_in_range() instead of memblock_x86_hole_size()

[tip-bot for Tejun Heo]

Commit-ID:  474b881bf4ee86aba55d46a4fdf293de32cba91b
Gitweb:     http://git.kernel.org/tip/474b881bf4ee86aba55d46a4fdf293de32cba91b
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:16:04 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:51 -0700

x86: Use absent_pages_in_range() instead of memblock_x86_hole_size()

memblock_x86_hole_size() calculates the total size of holes in a given
range according to memblock and is used by numa emulation code and
numa_meminfo_cover_memory().

Since conversion to MEMBLOCK_NODE_MAP, absent_pages_in_range() also
uses memblock and gives the same result.  This patch replaces
memblock_x86_hole_size() uses with absent_pages_in_range().  After the
conversion the x86 function doesn't have any user left and is killed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-12-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/memblock.h |    2 -
 arch/x86/mm/memblock.c          |   52 ---------------------------------------
 arch/x86/mm/numa.c              |    4 +-
 arch/x86/mm/numa_emulation.c    |   30 +++++++++++++---------
 4 files changed, 20 insertions(+), 68 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index a0cc7d6..17a882e 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -6,6 +6,4 @@
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 
-u64 memblock_x86_hole_size(u64 start, u64 end);
-
 #endif
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index a9d0972..7325c5d 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -32,55 +32,3 @@ void __init memblock_x86_free_range(u64 start, u64 end)
 
 	memblock_free(start, end - start);
 }
-
-/*
- * Finds an active region in the address range from start_pfn to last_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the memblock entry.
- */
-static int __init memblock_x86_find_active_region(const struct memblock_region *ei,
-				  unsigned long start_pfn,
-				  unsigned long last_pfn,
-				  unsigned long *ei_startpfn,
-				  unsigned long *ei_endpfn)
-{
-	u64 align = PAGE_SIZE;
-
-	*ei_startpfn = round_up(ei->base, align) >> PAGE_SHIFT;
-	*ei_endpfn = round_down(ei->base + ei->size, align) >> PAGE_SHIFT;
-
-	/* Skip map entries smaller than a page */
-	if (*ei_startpfn >= *ei_endpfn)
-		return 0;
-
-	/* Skip if map is outside the node */
-	if (*ei_endpfn <= start_pfn || *ei_startpfn >= last_pfn)
-		return 0;
-
-	/* Check for overlaps */
-	if (*ei_startpfn < start_pfn)
-		*ei_startpfn = start_pfn;
-	if (*ei_endpfn > last_pfn)
-		*ei_endpfn = last_pfn;
-
-	return 1;
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-u64 __init memblock_x86_hole_size(u64 start, u64 end)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long last_pfn = end >> PAGE_SHIFT;
-	unsigned long ei_startpfn, ei_endpfn, ram = 0;
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r)
-		if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
-					   &ei_startpfn, &ei_endpfn))
-			ram += ei_endpfn - ei_startpfn;
-
-	return end - start - ((u64)ram << PAGE_SHIFT);
-}
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index f4a40bd..88e5627 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -475,8 +475,8 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
 			numaram = 0;
 	}
 
-	e820ram = max_pfn - (memblock_x86_hole_size(0,
-					PFN_PHYS(max_pfn)) >> PAGE_SHIFT);
+	e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
+
 	/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
 	if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
 		printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index e3d471c..971fe70 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -28,6 +28,16 @@ static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi)
 	return -ENOENT;
 }
 
+static u64 mem_hole_size(u64 start, u64 end)
+{
+	unsigned long start_pfn = PFN_UP(start);
+	unsigned long end_pfn = PFN_DOWN(end);
+
+	if (start_pfn < end_pfn)
+		return PFN_PHYS(absent_pages_in_range(start_pfn, end_pfn));
+	return 0;
+}
+
 /*
  * Sets up nid to range from @start to @end.  The return value is -errno if
  * something went wrong, 0 otherwise.
@@ -89,7 +99,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 	 * Calculate target node size.  x86_32 freaks on __udivdi3() so do
 	 * the division in ulong number of pages and convert back.
 	 */
-	size = max_addr - addr - memblock_x86_hole_size(addr, max_addr);
+	size = max_addr - addr - mem_hole_size(addr, max_addr);
 	size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes);
 
 	/*
@@ -135,8 +145,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * Continue to add memory to this fake node if its
 			 * non-reserved memory is less than the per-node size.
 			 */
-			while (end - start -
-			       memblock_x86_hole_size(start, end) < size) {
+			while (end - start - mem_hole_size(start, end) < size) {
 				end += FAKE_NODE_MIN_SIZE;
 				if (end > limit) {
 					end = limit;
@@ -150,7 +159,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * this one must extend to the boundary.
 			 */
 			if (end < dma32_end && dma32_end - end -
-			    memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+			    mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
 				end = dma32_end;
 
 			/*
@@ -158,8 +167,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * next node, this one must extend to the end of the
 			 * physical node.
 			 */
-			if (limit - end -
-			    memblock_x86_hole_size(end, limit) < size)
+			if (limit - end - mem_hole_size(end, limit) < size)
 				end = limit;
 
 			ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes,
@@ -180,7 +188,7 @@ static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size)
 {
 	u64 end = start + size;
 
-	while (end - start - memblock_x86_hole_size(start, end) < size) {
+	while (end - start - mem_hole_size(start, end) < size) {
 		end += FAKE_NODE_MIN_SIZE;
 		if (end > max_addr) {
 			end = max_addr;
@@ -211,8 +219,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 	 * creates a uniform distribution of node sizes across the entire
 	 * machine (but not necessarily over physical nodes).
 	 */
-	min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) /
-						MAX_NUMNODES;
+	min_size = (max_addr - addr - mem_hole_size(addr, max_addr)) / MAX_NUMNODES;
 	min_size = max(min_size, FAKE_NODE_MIN_SIZE);
 	if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size)
 		min_size = (min_size + FAKE_NODE_MIN_SIZE) &
@@ -252,7 +259,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 			 * this one must extend to the boundary.
 			 */
 			if (end < dma32_end && dma32_end - end -
-			    memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+			    mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
 				end = dma32_end;
 
 			/*
@@ -260,8 +267,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 			 * next node, this one must extend to the end of the
 			 * physical node.
 			 */
-			if (limit - end -
-			    memblock_x86_hole_size(end, limit) < size)
+			if (limit - end - mem_hole_size(end, limit) < size)
 				end = limit;
 
 			ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES,

[tip:x86/memblock] memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option

[tip-bot for Tejun Heo]

Commit-ID:  c378ddd53f9b8832a46fd4fec050a97fc2269858
Gitweb:     http://git.kernel.org/tip/c378ddd53f9b8832a46fd4fec050a97fc2269858
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Thu, 14 Jul 2011 11:46:03 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:52 -0700

memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option

>From 6839454ae63f1eb21e515c10229ca95c22955fec Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:17 +0200

Make ARCH_DISCARD_MEMBLOCK a config option so that it can be handled
together with other MEMBLOCK options.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094603.GH3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/Kconfig                |    1 +
 arch/x86/include/asm/memblock.h |    2 --
 include/linux/memblock.h        |    2 +-
 mm/Kconfig                      |    3 +++
 mm/memblock.c                   |    2 +-
 5 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 97f0894..28116d4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,6 +26,7 @@ config X86
 	select HAVE_KPROBES
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 17a882e..bc56670 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -1,8 +1,6 @@
 #ifndef _X86_MEMBLOCK_H
 #define _X86_MEMBLOCK_H
 
-#define ARCH_DISCARD_MEMBLOCK
-
 void memblock_x86_reserve_range(u64 start, u64 end, char *name);
 void memblock_x86_free_range(u64 start, u64 end);
 
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 31def58..2491355 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -197,7 +197,7 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
 	     region++)
 
 
-#ifdef ARCH_DISCARD_MEMBLOCK
+#ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
 #define __init_memblock __meminit
 #define __initdata_memblock __meminitdata
 #else
diff --git a/mm/Kconfig b/mm/Kconfig
index 30a5d47..7c56971 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -134,6 +134,9 @@ config HAVE_MEMBLOCK
 config HAVE_MEMBLOCK_NODE_MAP
 	boolean
 
+config ARCH_DISCARD_MEMBLOCK
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/memblock.c b/mm/memblock.c
index c4a8750..ebc6119 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -959,7 +959,7 @@ static int __init early_memblock(char *p)
 }
 early_param("memblock", early_memblock);
 
-#if defined(CONFIG_DEBUG_FS) && !defined(ARCH_DISCARD_MEMBLOCK)
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_ARCH_DISCARD_MEMBLOCK)
 
 static int memblock_debug_show(struct seq_file *m, void *private)
 {

[tip:x86/memblock] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[tip-bot for Tejun Heo]

Commit-ID:  24aa07882b672fff2da2f5c955759f0bd13d32d5
Gitweb:     http://git.kernel.org/tip/24aa07882b672fff2da2f5c955759f0bd13d32d5
Author:     Tejun Heo <tj@kernel.org>
AuthorDate: Tue, 12 Jul 2011 11:16:06 +0200
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:47:53 -0700

memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

Other than sanity check and debug message, the x86 specific version of
memblock reserve/free functions are simple wrappers around the generic
versions - memblock_reserve/free().

This patch adds debug messages with caller identification to the
generic versions and replaces x86 specific ones and kills them.
arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty
after this change and removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/memblock.h |    7 -------
 arch/x86/kernel/aperture_64.c   |    2 +-
 arch/x86/kernel/check.c         |    2 +-
 arch/x86/kernel/head.c          |    2 +-
 arch/x86/kernel/head32.c        |    5 +++--
 arch/x86/kernel/head64.c        |    5 +++--
 arch/x86/kernel/mpparse.c       |    6 ++----
 arch/x86/kernel/setup.c         |   17 ++++++++---------
 arch/x86/kernel/trampoline.c    |    2 +-
 arch/x86/mm/Makefile            |    2 --
 arch/x86/mm/init.c              |    6 +++---
 arch/x86/mm/memblock.c          |   34 ----------------------------------
 arch/x86/mm/memtest.c           |    2 +-
 arch/x86/mm/numa.c              |    5 ++---
 arch/x86/mm/numa_32.c           |    6 +++---
 arch/x86/mm/numa_emulation.c    |    4 ++--
 arch/x86/platform/efi/efi.c     |    6 ++----
 arch/x86/xen/mmu.c              |   12 ++++--------
 arch/x86/xen/setup.c            |    7 +++----
 include/linux/memblock.h        |    2 --
 mm/memblock.c                   |    5 +++++
 mm/nobootmem.c                  |    6 +++---
 22 files changed, 48 insertions(+), 97 deletions(-)

diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
deleted file mode 100644
index bc56670..0000000
--- a/arch/x86/include/asm/memblock.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _X86_MEMBLOCK_H
-#define _X86_MEMBLOCK_H
-
-void memblock_x86_reserve_range(u64 start, u64 end, char *name);
-void memblock_x86_free_range(u64 start, u64 end);
-
-#endif
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 5636308..6e76c19 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -94,7 +94,7 @@ static u32 __init allocate_aperture(void)
 				addr, aper_size>>10);
 		return 0;
 	}
-	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64");
+	memblock_reserve(addr, aper_size);
 	/*
 	 * Kmemleak should not scan this block as it may not be mapped via the
 	 * kernel direct mapping.
diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index 621cd23..5da1269 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -91,7 +91,7 @@ void __init setup_bios_corruption_check(void)
 		if (start >= end)
 			continue;
 
-		memblock_x86_reserve_range(start, end, "SCAN RAM");
+		memblock_reserve(start, end - start);
 		scan_areas[num_scan_areas].addr = start;
 		scan_areas[num_scan_areas].size = end - start;
 
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
index af0699b..48d9d4e 100644
--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -52,5 +52,5 @@ void __init reserve_ebda_region(void)
 		lowmem = 0x9f000;
 
 	/* reserve all memory between lowmem and the 1MB mark */
-	memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved");
+	memblock_reserve(lowmem, 0x100000 - lowmem);
 }
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3bb0850..be9282b 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -33,7 +33,8 @@ void __init i386_start_kernel(void)
 {
 	memblock_init();
 
-	memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+	memblock_reserve(__pa_symbol(&_text),
+			 __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
@@ -42,7 +43,7 @@ void __init i386_start_kernel(void)
 		u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 		u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
 		u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
-		memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+		memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
 	}
 #endif
 
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 5655c22..fd25b11 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -100,7 +100,8 @@ void __init x86_64_start_reservations(char *real_mode_data)
 
 	memblock_init();
 
-	memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+	memblock_reserve(__pa_symbol(&_text),
+			 __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
@@ -109,7 +110,7 @@ void __init x86_64_start_reservations(char *real_mode_data)
 		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
 		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
 		unsigned long ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
-		memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+		memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
 	}
 #endif
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 8faeaa0..a6b79c1 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -564,9 +564,7 @@ void __init default_get_smp_config(unsigned int early)
 
 static void __init smp_reserve_memory(struct mpf_intel *mpf)
 {
-	unsigned long size = get_mpc_size(mpf->physptr);
-
-	memblock_x86_reserve_range(mpf->physptr, mpf->physptr+size, "* MP-table mpc");
+	memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
 }
 
 static int __init smp_scan_config(unsigned long base, unsigned long length)
@@ -595,7 +593,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
 			       mpf, (u64)virt_to_phys(mpf));
 
 			mem = virt_to_phys(mpf);
-			memblock_x86_reserve_range(mem, mem + sizeof(*mpf), "* MP-table mpf");
+			memblock_reserve(mem, sizeof(*mpf));
 			if (mpf->physptr)
 				smp_reserve_memory(mpf);
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 31ffe20..97d227e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -306,7 +306,8 @@ static void __init cleanup_highmap(void)
 static void __init reserve_brk(void)
 {
 	if (_brk_end > _brk_start)
-		memblock_x86_reserve_range(__pa(_brk_start), __pa(_brk_end), "BRK");
+		memblock_reserve(__pa(_brk_start),
+				 __pa(_brk_end) - __pa(_brk_start));
 
 	/* Mark brk area as locked down and no longer taking any
 	   new allocations */
@@ -337,7 +338,7 @@ static void __init relocate_initrd(void)
 
 	/* Note: this includes all the lowmem currently occupied by
 	   the initrd, we rely on that fact to keep the data intact. */
-	memblock_x86_reserve_range(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK");
+	memblock_reserve(ramdisk_here, area_size);
 	initrd_start = ramdisk_here + PAGE_OFFSET;
 	initrd_end   = initrd_start + ramdisk_size;
 	printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
@@ -393,7 +394,7 @@ static void __init reserve_initrd(void)
 	initrd_start = 0;
 
 	if (ramdisk_size >= (end_of_lowmem>>1)) {
-		memblock_x86_free_range(ramdisk_image, ramdisk_end);
+		memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
 		printk(KERN_ERR "initrd too large to handle, "
 		       "disabling initrd\n");
 		return;
@@ -416,7 +417,7 @@ static void __init reserve_initrd(void)
 
 	relocate_initrd();
 
-	memblock_x86_free_range(ramdisk_image, ramdisk_end);
+	memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
 }
 #else
 static void __init reserve_initrd(void)
@@ -490,15 +491,13 @@ static void __init memblock_x86_reserve_range_setup_data(void)
 {
 	struct setup_data *data;
 	u64 pa_data;
-	char buf[32];
 
 	if (boot_params.hdr.version < 0x0209)
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
-		sprintf(buf, "setup data %x", data->type);
-		memblock_x86_reserve_range(pa_data, pa_data+sizeof(*data)+data->len, buf);
+		memblock_reserve(pa_data, sizeof(*data) + data->len);
 		pa_data = data->next;
 		early_iounmap(data, sizeof(*data));
 	}
@@ -568,7 +567,7 @@ static void __init reserve_crashkernel(void)
 			return;
 		}
 	}
-	memblock_x86_reserve_range(crash_base, crash_base + crash_size, "CRASH KERNEL");
+	memblock_reserve(crash_base, crash_size);
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
 			"for crashkernel (System RAM: %ldMB)\n",
@@ -626,7 +625,7 @@ static __init void reserve_ibft_region(void)
 	addr = find_ibft_region(&size);
 
 	if (size)
-		memblock_x86_reserve_range(addr, addr + size, "* ibft");
+		memblock_reserve(addr, size);
 }
 
 static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index a1f13dd..a73b610 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -18,7 +18,7 @@ void __init setup_trampolines(void)
 		panic("Cannot allocate trampoline\n");
 
 	x86_trampoline_base = __va(mem);
-	memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE");
+	memblock_reserve(mem, size);
 
 	printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
 	       x86_trampoline_base, (unsigned long long)mem, size);
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 3d11327..23d8e5f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -27,6 +27,4 @@ obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
 obj-$(CONFIG_ACPI_NUMA)		+= srat.o
 obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
-obj-$(CONFIG_HAVE_MEMBLOCK)		+= memblock.o
-
 obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 13cf05a..0b736b9 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -81,7 +81,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse,
 
 void __init native_pagetable_reserve(u64 start, u64 end)
 {
-	memblock_x86_reserve_range(start, end, "PGTABLE");
+	memblock_reserve(start, end - start);
 }
 
 struct map_range {
@@ -280,8 +280,8 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	 * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top)
 	 * so that they can be reused for other purposes.
 	 *
-	 * On native it just means calling memblock_x86_reserve_range, on Xen it
-	 * also means marking RW the pagetable pages that we allocated before
+	 * On native it just means calling memblock_reserve, on Xen it also
+	 * means marking RW the pagetable pages that we allocated before
 	 * but that haven't been used.
 	 *
 	 * In fact on xen we mark RO the whole range pgt_buf_start -
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
deleted file mode 100644
index 7325c5d..0000000
--- a/arch/x86/mm/memblock.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/memblock.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/range.h>
-
-void __init memblock_x86_reserve_range(u64 start, u64 end, char *name)
-{
-	if (start == end)
-		return;
-
-	if (WARN_ONCE(start > end, "memblock_x86_reserve_range: wrong range [%#llx, %#llx)\n", start, end))
-		return;
-
-	memblock_dbg("    memblock_x86_reserve_range: [%#010llx-%#010llx] %16s\n", start, end - 1, name);
-
-	memblock_reserve(start, end - start);
-}
-
-void __init memblock_x86_free_range(u64 start, u64 end)
-{
-	if (start == end)
-		return;
-
-	if (WARN_ONCE(start > end, "memblock_x86_free_range: wrong range [%#llx, %#llx)\n", start, end))
-		return;
-
-	memblock_dbg("       memblock_x86_free_range: [%#010llx-%#010llx]\n", start, end - 1);
-
-	memblock_free(start, end - start);
-}
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 46a5ff2..c80b9fb 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -34,7 +34,7 @@ static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad)
 	       (unsigned long long) pattern,
 	       (unsigned long long) start_bad,
 	       (unsigned long long) end_bad);
-	memblock_x86_reserve_range(start_bad, end_bad, "BAD RAM");
+	memblock_reserve(start_bad, end_bad - start_bad);
 }
 
 static void __init memtest(u64 pattern, u64 start_phys, u64 size)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 88e5627..496f494 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -364,8 +364,7 @@ void __init numa_reset_distance(void)
 
 	/* numa_distance could be 1LU marking allocation failure, test cnt */
 	if (numa_distance_cnt)
-		memblock_x86_free_range(__pa(numa_distance),
-					__pa(numa_distance) + size);
+		memblock_free(__pa(numa_distance), size);
 	numa_distance_cnt = 0;
 	numa_distance = NULL;	/* enable table creation */
 }
@@ -394,7 +393,7 @@ static int __init numa_alloc_distance(void)
 		numa_distance = (void *)1LU;
 		return -ENOMEM;
 	}
-	memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
+	memblock_reserve(phys, size);
 
 	numa_distance = __va(phys);
 	numa_distance_cnt = cnt;
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 58878b5..534255a 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -204,7 +204,7 @@ void __init init_alloc_remap(int nid, u64 start, u64 end)
 			   size, nid);
 		return;
 	}
-	memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
+	memblock_reserve(node_pa, size);
 
 	remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
 					  max_low_pfn << PAGE_SHIFT,
@@ -212,10 +212,10 @@ void __init init_alloc_remap(int nid, u64 start, u64 end)
 	if (!remap_pa) {
 		pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
 			   size, nid);
-		memblock_x86_free_range(node_pa, node_pa + size);
+		memblock_free(node_pa, size);
 		return;
 	}
-	memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
+	memblock_reserve(remap_pa, size);
 	remap_va = phys_to_virt(remap_pa);
 
 	/* perform actual remap */
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index 971fe70..46db568 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -361,7 +361,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 			pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
 			goto no_emu;
 		}
-		memblock_x86_reserve_range(phys, phys + phys_size, "TMP NUMA DIST");
+		memblock_reserve(phys, phys_size);
 		phys_dist = __va(phys);
 
 		for (i = 0; i < numa_dist_cnt; i++)
@@ -430,7 +430,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 
 	/* free the copied physical distance table */
 	if (phys_dist)
-		memblock_x86_free_range(__pa(phys_dist), __pa(phys_dist) + phys_size);
+		memblock_free(__pa(phys_dist), phys_size);
 	return;
 
 no_emu:
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index a4c322c..3b4e86b 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -280,8 +280,7 @@ void __init efi_memblock_x86_reserve_range(void)
 		boot_params.efi_info.efi_memdesc_size;
 	memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
 	memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
-	memblock_x86_reserve_range(pmap, pmap + memmap.nr_map * memmap.desc_size,
-		      "EFI memmap");
+	memblock_reserve(pmap, memmap.nr_map * memmap.desc_size);
 }
 
 #if EFI_DEBUG
@@ -332,8 +331,7 @@ void __init efi_reserve_boot_services(void)
 					"[0x%010llx-0x%010llx]\n",
 						start, start+size-1);
 		} else
-			memblock_x86_reserve_range(start, start+size,
-							"EFI Boot");
+			memblock_reserve(start, size);
 	}
 }
 
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0ccccb6..ad54fa1 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1720,10 +1720,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 	__xen_write_cr3(true, __pa(pgd));
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 
-	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
+	memblock_reserve(__pa(xen_start_info->pt_base),
+			 xen_start_info->nr_pt_frames * PAGE_SIZE);
 
 	return pgd;
 }
@@ -1799,10 +1797,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 			  PFN_DOWN(__pa(initial_page_table)));
 	xen_write_cr3(__pa(initial_page_table));
 
-	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
+	memblock_reserve(__pa(xen_start_info->pt_base),
+			 xen_start_info->nr_pt_frames * PAGE_SIZE));
 
 	return initial_page_table;
 }
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 60aeeb5..73daaf7 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -63,7 +63,7 @@ static void __init xen_add_extra_mem(unsigned long pages)
 	e820_add_region(extra_start, size, E820_RAM);
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
-	memblock_x86_reserve_range(extra_start, extra_start + size, "XEN EXTRA");
+	memblock_reserve(extra_start, size);
 
 	xen_extra_mem_size += size;
 
@@ -287,9 +287,8 @@ char * __init xen_memory_setup(void)
 	 *  - xen_start_info
 	 * See comment above "struct start_info" in <xen/interface/xen.h>
 	 */
-	memblock_x86_reserve_range(__pa(xen_start_info->mfn_list),
-		      __pa(xen_start_info->pt_base),
-			"XEN START INFO");
+	memblock_reserve(__pa(xen_start_info->mfn_list),
+			 xen_start_info->pt_base - xen_start_info->mfn_list);
 
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 2491355..9074631 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -17,8 +17,6 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 
-#include <asm/memblock.h>
-
 #define INIT_MEMBLOCK_REGIONS	128
 
 struct memblock_region {
diff --git a/mm/memblock.c b/mm/memblock.c
index ebc6119..0cb4da6 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -449,6 +449,9 @@ long __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size)
 
 long __init_memblock memblock_free(phys_addr_t base, phys_addr_t size)
 {
+	memblock_dbg("   memblock_free: [%#016llx-%#016llx] %pF\n",
+		     base, base + size, (void *)_RET_IP_);
+
 	return __memblock_remove(&memblock.reserved, base, size);
 }
 
@@ -456,6 +459,8 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 {
 	struct memblock_type *_rgn = &memblock.reserved;
 
+	memblock_dbg("memblock_reserve: [%#016llx-%#016llx] %pF\n",
+		     base, base + size, (void *)_RET_IP_);
 	BUG_ON(0 == size);
 
 	return memblock_add_region(_rgn, base, size);
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 7075bc0..29d948c 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -47,7 +47,7 @@ static void * __init __alloc_memory_core_early(int nid, u64 size, u64 align,
 
 	ptr = phys_to_virt(addr);
 	memset(ptr, 0, size);
-	memblock_x86_reserve_range(addr, addr + size, "BOOTMEM");
+	memblock_reserve(addr, size);
 	/*
 	 * The min_count is set to 0 so that bootmem allocated blocks
 	 * are never reported as leaks.
@@ -175,7 +175,7 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 			      unsigned long size)
 {
 	kmemleak_free_part(__va(physaddr), size);
-	memblock_x86_free_range(physaddr, physaddr + size);
+	memblock_free(physaddr, size);
 }
 
 /**
@@ -190,7 +190,7 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 void __init free_bootmem(unsigned long addr, unsigned long size)
 {
 	kmemleak_free_part(__va(addr), size);
-	memblock_x86_free_range(addr, addr + size);
+	memblock_free(addr, size);
 }
 
 static void * __init ___alloc_bootmem_nopanic(unsigned long size,

[tip:x86/memblock] memblock: Cast phys_addr_t to unsigned long long for printf use

[tip-bot for H. Peter Anvin]

Commit-ID:  a150439c4a97db379f0ed6faa46fbbb6e7bf3cb2
Gitweb:     http://git.kernel.org/tip/a150439c4a97db379f0ed6faa46fbbb6e7bf3cb2
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Thu, 14 Jul 2011 11:57:10 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 14 Jul 2011 11:57:10 -0700

memblock: Cast phys_addr_t to unsigned long long for printf use

phys_addr_t is not necessarily the same thing as unsigned long long.
It is, however, easier to cast it to unsigned long long for printf
purposes than it is to deal with differnent printf formats.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/4E1F4D2C.3000507@zytor.com
---
 mm/memblock.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/mm/memblock.c b/mm/memblock.c
index 0cb4da6..a75723d 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -450,7 +450,9 @@ long __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size)
 long __init_memblock memblock_free(phys_addr_t base, phys_addr_t size)
 {
 	memblock_dbg("   memblock_free: [%#016llx-%#016llx] %pF\n",
-		     base, base + size, (void *)_RET_IP_);
+		     (unsigned long long)base,
+		     (unsigned long long)base + size,
+		     (void *)_RET_IP_);
 
 	return __memblock_remove(&memblock.reserved, base, size);
 }
@@ -460,7 +462,9 @@ long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
 	struct memblock_type *_rgn = &memblock.reserved;
 
 	memblock_dbg("memblock_reserve: [%#016llx-%#016llx] %pF\n",
-		     base, base + size, (void *)_RET_IP_);
+		     (unsigned long long)base,
+		     (unsigned long long)base + size,
+		     (void *)_RET_IP_);
 	BUG_ON(0 == size);
 
 	return memblock_add_region(_rgn, base, size);

Re: [PATCH 2.5/13] memblock: Use __meminit[data] instead of __init[data]

[Tejun Heo]

Hello,

On Thu, Jul 14, 2011 at 02:00:51PM -0700, Yinghai Lu wrote:
> >  #ifdef ARCH_DISCARD_MEMBLOCK
> > -#define __init_memblock __init
> > -#define __initdata_memblock __initdata
> > +#define __init_memblock __meminit
> > +#define __initdata_memblock __meminitdata
> >  #else
> >  #define __init_memblock
> >  #define __initdata_memblock
> 
> that is not good. It will keep memblock.reserved related data and
> functions after boot.
> and those data/func are not used after slab is ready.

Yeah, if MEMORY_HOTPLUG is enabled.  It isn't too big area to begin
with and early_node_map[] and related code removal should offset it.
The problem is that refining different __init tags here is a bit
complex thanks to DISCARD_MEMBLOCK.  We end up having to deal with the
combination of DISCARD_MEMBLOCK and MEMORY_HOTPLUG.  I was hoping that
once we get memblock usage more consistent across different archs, we
could do away with DISCARD_MEMBLOCK.

Thank you.

-- 
tejun

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Yinghai Lu]

On Tue, Jul 12, 2011 at 2:16 AM, Tejun Heo <tj@kernel.org> wrote:
> Other than sanity check and debug message, the x86 specific version of
> memblock reserve/free functions are simple wrappers around the generic
> versions - memblock_reserve/free().
>
> This patch adds debug messages with caller identification to the
> generic versions and replaces x86 specific ones and kills them.
> arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty
> after this change and removed.
>
...
> diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
> index 5636308..6e76c19 100644
> --- a/arch/x86/kernel/aperture_64.c
> +++ b/arch/x86/kernel/aperture_64.c
> @@ -94,7 +94,7 @@ static u32 __init allocate_aperture(void)
>                                addr, aper_size>>10);
>                return 0;
>        }
> -       memblock_x86_reserve_range(addr, addr + aper_size, "aperture64");
> +       memblock_reserve(addr, aper_size);

Wonder if we have a new function like

__memblock_reserve(addr, size, name)

in mm/memblock.c

so could keep string for debug purpose instead of using _RET_IP_.

with that, we can figure out what is in exact reserved position with boot log.

Thanks

Yinghai

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Tejun Heo]

Hello, Yinghai.

On Tue, Jul 26, 2011 at 11:06 PM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
> Wonder if we have a new function like
>
> __memblock_reserve(addr, size, name)
>
> in mm/memblock.c
>
> so could keep string for debug purpose instead of using _RET_IP_.
>
> with that, we can figure out what is in exact reserved position with boot log.

If you look at the current users, the caller function name is unique
except for one or two cases, so we can already tell who's doing what
even without consulting the exact IP.  I can't see much point in
providing debug strings explicitly.  The only benefit would be that it
would be prettier but these are purely debug messages.  One thing
which might make sense is preserving _RET_IP_ of callers of alloc
functions so that reserve can show who's allocating instead of
printing the alloc function each time.

Thanks.

-- 
tejun

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Yinghai Lu]

On Tue, Jul 26, 2011 at 2:46 PM, Tejun Heo <tj@kernel.org> wrote:
> Hello, Yinghai.
>
> On Tue, Jul 26, 2011 at 11:06 PM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
>> Wonder if we have a new function like
>>
>> __memblock_reserve(addr, size, name)
>>
>> in mm/memblock.c
>>
>> so could keep string for debug purpose instead of using _RET_IP_.
>>
>> with that, we can figure out what is in exact reserved position with boot log.
>
> If you look at the current users, the caller function name is unique
> except for one or two cases, so we can already tell who's doing what
> even without consulting the exact IP.  I can't see much point in
> providing debug strings explicitly.  The only benefit would be that it
> would be prettier but these are purely debug messages.  One thing
> which might make sense is preserving _RET_IP_ of callers of alloc
> functions so that reserve can show who's allocating instead of
> printing the alloc function each time.

yes, with bootmem wrap stage, the print out are all the same.

will have
__alloc_memory_core_early+0x63
everywhere.

add name print out for comparing, name could give some hint.

early console in decompress_kernel
decompress_kernel:
  input: [0x268a269-0x2e110ac], output: 0x1000000, heap: [0x2e16080-0x2e1e07f]..

Decompressing Linux... xz... Parsing ELF... done
Booting the kernel
[    0.000000] bootconsole [uart0] enabled
[    0.000000] Kernel Layout:
[    0.000000]   .text: [0x01000000-0x01c40639]
[    0.000000] .rodata: [0x01c46000-0x023e7fff]
[    0.000000]   .data: [0x023e8000-0x02521b7f]
[    0.000000]   .init: [0x02524000-0x027f3fff]
[    0.000000]    .bss: [0x027fe000-0x033affff]
[    0.000000]    .brk: [0x033b0000-0x033cffff]
[    0.000000] memblock_reserve: [0x01000000-0x033affff]
x86_64_start_reservations+0x67/0xaf TEXT DATA BSS
[    0.000000] memblock_reserve: [0x7baf3000-0x7f72ffff]
x86_64_start_reservations+0xa0/0xaf RAMDISK
[    0.000000] memblock_reserve: [0x00095400-0x000fffff]
reserve_ebda_region+0x62/0x64 * BIOS reserved
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-tip-yh-06478-g4d387ec-dirty
(yhlu@linux-siqj.site) (gcc version 4.5.0 20100604 [gcc-4_5-branch
revision 160292] (SUSE Linux) ) #1155 SMP Tue Jul 26 17:28:15 PDT 2011
[    0.000000] Command line: console=uart8250,io,0x3f8,115200n8
initrd=kernel.org/x.gz rw root=/dev/ram0 debug ignore_loglevel
unknown_nmi_panic initcall_debug apic=debug pci=routeirq ip=dhcp
load_ramdisk=1 BOOT_IMAGE=kernel.org/bzImage_3.0_k8.2
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: [0x00000000000000-0x000000000957ff] (usable)
[    0.000000]  BIOS-e820: [0x00000000095800-0x0000000009ffff] (reserved)
[    0.000000]  BIOS-e820: [0x000000000e0000-0x000000000fffff] (reserved)
[    0.000000]  BIOS-e820: [0x00000000100000-0x0000007f74ffff] (usable)
[    0.000000]  BIOS-e820: [0x0000007f75e000-0x0000007f75ffff] type 9
[    0.000000]  BIOS-e820: [0x0000007f760000-0x0000007f76dfff] (ACPI data)
[    0.000000]  BIOS-e820: [0x0000007f76e000-0x0000007f7cffff] (ACPI NVS)
[    0.000000]  BIOS-e820: [0x0000007f7d0000-0x0000007f7dffff] (reserved)
[    0.000000]  BIOS-e820: [0x0000007f7ec000-0x0000008fffffff] (reserved)
[    0.000000]  BIOS-e820: [0x000000fee00000-0x000000fee00fff] (reserved)
[    0.000000]  BIOS-e820: [0x000000ffc00000-0x000000ffffffff] (reserved)
[    0.000000]  BIOS-e820: [0x00000100000000-0x0000807fffffff] (usable)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820 update range: [0x00000000095000-0x000000000957ff]
(usable) ==> (reserved)
[    0.000000] aligned physical RAM map:
[    0.000000]  aligned: [0x00000000000000-0x00000000094fff] (usable)
[    0.000000]  aligned: [0x00000000095000-0x0000000009ffff] (reserved)
[    0.000000]  aligned: [0x000000000e0000-0x000000000fffff] (reserved)
[    0.000000]  aligned: [0x00000000100000-0x0000007f74ffff] (usable)
[    0.000000]  aligned: [0x0000007f75e000-0x0000007f75ffff] type 9
[    0.000000]  aligned: [0x0000007f760000-0x0000007f76dfff] (ACPI data)
[    0.000000]  aligned: [0x0000007f76e000-0x0000007f7cffff] (ACPI NVS)
[    0.000000]  aligned: [0x0000007f7d0000-0x0000007f7dffff] (reserved)
[    0.000000]  aligned: [0x0000007f7ec000-0x0000008fffffff] (reserved)
[    0.000000]  aligned: [0x000000fee00000-0x000000fee00fff] (reserved)
[    0.000000]  aligned: [0x000000ffc00000-0x000000ffffffff] (reserved)
[    0.000000]  aligned: [0x00000100000000-0x0000807fffffff] (usable)
[    0.000000] DMI present.
[    0.000000] DMI: Oracle Corporation  Sun Fire X4800/     , BIOS
11016600    05/17/2011
[    0.000000] e820 update range: [0x00000000000000-0x0000000000ffff]
(usable) ==> (reserved)
[    0.000000] e820 remove range: [0x000000000a0000-0x000000000fffff] (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x8080000 max_arch_pfn = 0x400000000
[    0.000000] e820 update range: [0x0000007f800000-0x000000ffffffff]
(usable) ==> (reserved)
[    0.000000] last_pfn = 0x7f750 max_arch_pfn = 0x400000000
[    0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[    0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[    0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] memblock_reserve: [0x000ff780-0x000ff78f]
smp_scan_config+0xbf/0xfa * MP-table mpf
[    0.000000]   mpc: e77f0-e85a4
[    0.000000] memblock_reserve: [0x000e77f0-0x000e85a3]
smp_scan_config+0xdf/0xfa * MP-table mpc
[    0.000000] memblock_reserve: [0x033b0000-0x033b08a9]
setup_arch+0x593/0x847 BRK
[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0x7fff6d5000 reserved size = 0x60584aa
[    0.000000]  memory.cnt  = 0x3
[    0.000000]  memory[0x0]	[0x00010000-0x00094fff], 0x85000 bytes
[    0.000000]  memory[0x1]	[0x00100000-0x7f74ffff], 0x7f650000 bytes
[    0.000000]  memory[0x2]	[0x100000000-0x807fffffff], 0x7f80000000 bytes
[    0.000000]  reserved.cnt  = 0x3
[    0.000000]  reserved[0x0]	[0x00095400-0x000fffff], 0x6ac00 bytes
[    0.000000]  reserved[0x1]	[0x01000000-0x033b08a9], 0x23b08aa bytes
[    0.000000]  reserved[0x2]	[0x7baf3000-0x7f72ffff], 0x3c3d000 bytes
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] memblock_reserve: [0x00090000-0x00094fff]
setup_trampolines+0x79/0xae TRAMPOLINE
[    0.000000] Base memory trampoline at [ffff880000090000] 90000 size 20480
[    0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f750000 page 4k
[    0.000000] kernel direct mapping tables up to 7f750000 @
[0x7f74e000-0x7f74ffff]
[    0.000000] memblock_reserve: [0x7f74e000-0x7f74ffff]
find_early_table_space.clone.0+0x16a/0x16f PGTABLE
[    0.000000] init_memory_mapping: [0x00000100000000-0x0000807fffffff]
[    0.000000]  0100000000 - 8080000000 page 2M
[    0.000000] kernel direct mapping tables up to 8080000000 @
[0x807fe01000-0x807fffffff]
[    0.000000] memblock_reserve: [0x807fe01000-0x807fffffff]
find_early_table_space.clone.0+0x16a/0x16f PGTABLE
[    0.000000] RAMDISK: 7baf3000 - 7f730000
[    0.000000] ACPI: RSDP 00000000000fab60 00024 (v02 SUN   )
[    0.000000] ACPI: XSDT 000000007f760100 0009C (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: FACP 000000007f760290 000F4 (v04 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000007f760a30 0828E (v02 SUN    X4800
00000066 INTL 20051117)
[    0.000000] ACPI: FACS 000000007f76e000 00040
[    0.000000] ACPI: APIC 000000007f760390 00482 (v02 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: SPCR 000000007f760820 00050 (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000007f760870 0003C (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: SLIT 000000007f76096c 0006C (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: SPMI 000000007f7609e0 00041 (v05 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000007f76e040 00139 (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: HPET 000000007f76ba30 00038 (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: SRAT 000000007f76ba70 009C0 (v02 SUN    X4800
00000001 INTL 00000001)
[    0.000000] ACPI: DMAR 000000007f76e180 002C8 (v01 SUN    X4800
00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 000000007f7a0e20 0036D (v01 SUN       CpuPm
00000012 INTL 20051117)
[    0.000000] ACPI: EINJ 000000007f76c430 00130 (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: BERT 000000007f76c5c0 00030 (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: ERST 000000007f76c5f0 00210 (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: HEST 000000007f76c800 000A8 (v01 SUN    X4800
20110517 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fb000 (        fee00000)
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x16 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x26 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x36 -> Node 1
[    0.000000] SRAT: PXM 2 -> APIC 0x40 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x42 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x44 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x46 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x50 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x52 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x54 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x56 -> Node 2
[    0.000000] SRAT: PXM 3 -> APIC 0x60 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x62 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x64 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x66 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x70 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x72 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x74 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x76 -> Node 3
[    0.000000] SRAT: PXM 4 -> APIC 0x80 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x82 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x84 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x86 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x90 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x92 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x94 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x96 -> Node 4
[    0.000000] SRAT: PXM 5 -> APIC 0xa0 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xa2 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xa4 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xa6 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb0 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb2 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb4 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb6 -> Node 5
[    0.000000] SRAT: PXM 6 -> APIC 0xc0 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xc2 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xc4 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xc6 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd0 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd2 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd4 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd6 -> Node 6
[    0.000000] SRAT: PXM 7 -> APIC 0xe0 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xe2 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xe4 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xe6 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf0 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf2 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf4 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf6 -> Node 7
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x17 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x27 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x37 -> Node 1
[    0.000000] SRAT: PXM 2 -> APIC 0x41 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x43 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x45 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x47 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x51 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x53 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x55 -> Node 2
[    0.000000] SRAT: PXM 2 -> APIC 0x57 -> Node 2
[    0.000000] SRAT: PXM 3 -> APIC 0x61 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x63 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x65 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x67 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x71 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x73 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x75 -> Node 3
[    0.000000] SRAT: PXM 3 -> APIC 0x77 -> Node 3
[    0.000000] SRAT: PXM 4 -> APIC 0x81 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x83 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x85 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x87 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x91 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x93 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x95 -> Node 4
[    0.000000] SRAT: PXM 4 -> APIC 0x97 -> Node 4
[    0.000000] SRAT: PXM 5 -> APIC 0xa1 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xa3 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xa5 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xa7 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb1 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb3 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb5 -> Node 5
[    0.000000] SRAT: PXM 5 -> APIC 0xb7 -> Node 5
[    0.000000] SRAT: PXM 6 -> APIC 0xc1 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xc3 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xc5 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xc7 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd1 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd3 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd5 -> Node 6
[    0.000000] SRAT: PXM 6 -> APIC 0xd7 -> Node 6
[    0.000000] SRAT: PXM 7 -> APIC 0xe1 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xe3 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xe5 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xe7 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf1 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf3 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf5 -> Node 7
[    0.000000] SRAT: PXM 7 -> APIC 0xf7 -> Node 7
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-80000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-1080000000
[    0.000000] SRAT: Node 1 PXM 1 1080000000-2080000000
[    0.000000] SRAT: Node 2 PXM 2 2080000000-3080000000
[    0.000000] SRAT: Node 3 PXM 3 3080000000-4080000000
[    0.000000] SRAT: Node 4 PXM 4 4080000000-5080000000
[    0.000000] SRAT: Node 5 PXM 5 5080000000-6080000000
[    0.000000] SRAT: Node 6 PXM 6 6080000000-7080000000
[    0.000000] SRAT: Node 7 PXM 7 7080000000-8080000000
[    0.000000] ACPI: SLIT: nodes = 8
[    0.000000]    10 15 20 15 15 20 20 20
[    0.000000]    15 10 15 20 20 15 20 20
[    0.000000]    20 15 10 15 20 20 15 20
[    0.000000]    15 20 15 10 20 20 20 15
[    0.000000]    15 20 20 20 10 15 15 20
[    0.000000]    20 15 20 20 15 10 20 15
[    0.000000]    20 20 15 20 15 20 10 15
[    0.000000]    20 20 20 15 20 15 15 10
[    0.000000] memblock_reserve: [0x807fe00000-0x807fe0003f]
numa_alloc_distance+0xd4/0x13e NODE DIST
[    0.000000] NUMA: Initialized distance table, cnt=8
[    0.000000] NUMA: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
[    0.000000] NUMA: Node 0 [0,80000000) + [100000000,1080000000) ->
[0,1080000000)
[    0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff]
[    0.000000] memblock_reserve: [0x107fffb000-0x107fffffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000107fffb000 - 0x0000107fffffff]
[    0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff]
[    0.000000] memblock_reserve: [0x207fffb000-0x207fffffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000207fffb000 - 0x0000207fffffff]
[    0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff]
[    0.000000] memblock_reserve: [0x307fffb000-0x307fffffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000307fffb000 - 0x0000307fffffff]
[    0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff]
[    0.000000] memblock_reserve: [0x407fffb000-0x407fffffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000407fffb000 - 0x0000407fffffff]
[    0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff]
[    0.000000] memblock_reserve: [0x507fffb000-0x507fffffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000507fffb000 - 0x0000507fffffff]
[    0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff]
[    0.000000] memblock_reserve: [0x607fffb000-0x607fffffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000607fffb000 - 0x0000607fffffff]
[    0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff]
[    0.000000] memblock_reserve: [0x707fffb000-0x707fffffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000707fffb000 - 0x0000707fffffff]
[    0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff]
[    0.000000] memblock_reserve: [0x807fdfb000-0x807fdfffff]
memblock_reserve+0x10/0x12
[    0.000000]   NODE_DATA [#000000807fdfb000 - 0x0000807fdfffff]
[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0x7fff6d5000 reserved size = 0x62864ea
[    0.000000]  memory.cnt  = 0xa
[    0.000000]  memory[0x0]	[0x00010000-0x00094fff], 0x85000 bytes on node 0
[    0.000000]  memory[0x1]	[0x00100000-0x7f74ffff], 0x7f650000 bytes on node 0
[    0.000000]  memory[0x2]	[0x100000000-0x107fffffff], 0xf80000000
bytes on node 0
[    0.000000]  memory[0x3]	[0x1080000000-0x207fffffff], 0x1000000000
bytes on node 1
[    0.000000]  memory[0x4]	[0x2080000000-0x307fffffff], 0x1000000000
bytes on node 2
[    0.000000]  memory[0x5]	[0x3080000000-0x407fffffff], 0x1000000000
bytes on node 3
[    0.000000]  memory[0x6]	[0x4080000000-0x507fffffff], 0x1000000000
bytes on node 4
[    0.000000]  memory[0x7]	[0x5080000000-0x607fffffff], 0x1000000000
bytes on node 5
[    0.000000]  memory[0x8]	[0x6080000000-0x707fffffff], 0x1000000000
bytes on node 6
[    0.000000]  memory[0x9]	[0x7080000000-0x807fffffff], 0x1000000000
bytes on node 7
[    0.000000]  reserved.cnt  = 0xe
[    0.000000]  reserved[0x0]	[0x00090000-0x00094fff], 0x5000 bytes
[    0.000000]  reserved[0x1]	[0x00095400-0x000fffff], 0x6ac00 bytes
[    0.000000]  reserved[0x2]	[0x01000000-0x033b08a9], 0x23b08aa bytes
[    0.000000]  reserved[0x3]	[0x7baf3000-0x7f72ffff], 0x3c3d000 bytes
[    0.000000]  reserved[0x4]	[0x7f74e000-0x7f74ffff], 0x2000 bytes
[    0.000000]  reserved[0x5]	[0x107fffb000-0x107fffffff], 0x5000 bytes
[    0.000000]  reserved[0x6]	[0x207fffb000-0x207fffffff], 0x5000 bytes
[    0.000000]  reserved[0x7]	[0x307fffb000-0x307fffffff], 0x5000 bytes
[    0.000000]  reserved[0x8]	[0x407fffb000-0x407fffffff], 0x5000 bytes
[    0.000000]  reserved[0x9]	[0x507fffb000-0x507fffffff], 0x5000 bytes
[    0.000000]  reserved[0xa]	[0x607fffb000-0x607fffffff], 0x5000 bytes
[    0.000000]  reserved[0xb]	[0x707fffb000-0x707fffffff], 0x5000 bytes
[    0.000000]  reserved[0xc]	[0x807fdfb000-0x807fe0003f], 0x5040 bytes
[    0.000000]  reserved[0xd]	[0x807fe01000-0x807fffffff], 0x1ff000 bytes
[    0.000000] memblock_reserve: [0x107fffa000-0x107fffafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x107fff9000-0x107fff9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x107fff8000-0x107fff8fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x207fffa000-0x207fffafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x207fff9000-0x207fff9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x307fffa000-0x307fffafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x307fff9000-0x307fff9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x407fffa000-0x407fffafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x407fff9000-0x407fff9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x507fffa000-0x507fffafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x507fff9000-0x507fff9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x607fffa000-0x607fffafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x607fff9000-0x607fff9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x707fffa000-0x707fffafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x707fff9000-0x707fff9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x807fdfa000-0x807fdfafff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x807fdf9000-0x807fdf9fff]
__alloc_memory_core_early+0x63/0xad sparse section
[    0.000000] memblock_reserve: [0x807f9f9000-0x807fdf8fff]
__alloc_memory_core_early+0x63/0xad usemap_map
[    0.000000] memblock_reserve: [0x107fff5000-0x107fff7fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x207fff6000-0x207fff8fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x307fff6000-0x307fff8fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x407fff6000-0x407fff8fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x507fff6000-0x507fff8fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x607fff6000-0x607fff8fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x707fff6000-0x707fff8fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x807f9f6000-0x807f9f8fff]
__alloc_memory_core_early+0x63/0xad usemap section
[    0.000000] memblock_reserve: [0x807f5f6000-0x807f9f5fff]
__alloc_memory_core_early+0x63/0xad map_map
[    0.000000] memblock_reserve: [0x103fe00000-0x107fdfffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000] memblock_reserve: [0x107fff4000-0x107fff4fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea0000000000-ffffea7fffffffff] PGD ->
ffff88107fff4000 on node 0
[    0.000000] memblock_reserve: [0x107fff3000-0x107fff3fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea0000000000-ffffea003fffffff] PUD ->
ffff88107fff3000 on node 0
[    0.000000]    memblock_free: [0x1077e00000-0x107fdfffff]
[    0.000000] memblock_reserve: [0x203fe00000-0x207fdfffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000]  [ffffea0000000000-ffffea0039bfffff] PMD ->
[ffff88103fe00000-ffff881077dfffff] on node 0
[    0.000000] memblock_reserve: [0x207fff5000-0x207fff5fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea0040000000-ffffea007fffffff] PUD ->
ffff88207fff5000 on node 1
[    0.000000]    memblock_free: [0x2077e00000-0x207fdfffff]
[    0.000000] memblock_reserve: [0x303fe00000-0x307fdfffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000]  [ffffea0039c00000-ffffea0071bfffff] PMD ->
[ffff88203fe00000-ffff882077dfffff] on node 1
[    0.000000] memblock_reserve: [0x307fff5000-0x307fff5fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea0080000000-ffffea00bfffffff] PUD ->
ffff88307fff5000 on node 2
[    0.000000]    memblock_free: [0x3077e00000-0x307fdfffff]
[    0.000000] memblock_reserve: [0x403fe00000-0x407fdfffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000]  [ffffea0071c00000-ffffea00a9bfffff] PMD ->
[ffff88303fe00000-ffff883077dfffff] on node 2
[    0.000000] memblock_reserve: [0x407fff5000-0x407fff5fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea00c0000000-ffffea00ffffffff] PUD ->
ffff88407fff5000 on node 3
[    0.000000]    memblock_free: [0x4077e00000-0x407fdfffff]
[    0.000000] memblock_reserve: [0x503fe00000-0x507fdfffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000]  [ffffea00a9c00000-ffffea00e1bfffff] PMD ->
[ffff88403fe00000-ffff884077dfffff] on node 3
[    0.000000] memblock_reserve: [0x507fff5000-0x507fff5fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea0100000000-ffffea013fffffff] PUD ->
ffff88507fff5000 on node 4
[    0.000000]    memblock_free: [0x5077e00000-0x507fdfffff]
[    0.000000] memblock_reserve: [0x603fe00000-0x607fdfffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000]  [ffffea00e1c00000-ffffea0119bfffff] PMD ->
[ffff88503fe00000-ffff885077dfffff] on node 4
[    0.000000] memblock_reserve: [0x607fff5000-0x607fff5fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea0140000000-ffffea017fffffff] PUD ->
ffff88607fff5000 on node 5
[    0.000000]    memblock_free: [0x6077e00000-0x607fdfffff]
[    0.000000] memblock_reserve: [0x703fe00000-0x707fdfffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000]  [ffffea0119c00000-ffffea0151bfffff] PMD ->
[ffff88603fe00000-ffff886077dfffff] on node 5
[    0.000000] memblock_reserve: [0x707fff5000-0x707fff5fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea0180000000-ffffea01bfffffff] PUD ->
ffff88707fff5000 on node 6
[    0.000000]    memblock_free: [0x7077e00000-0x707fdfffff]
[    0.000000] memblock_reserve: [0x803f400000-0x807f3fffff]
__alloc_memory_core_early+0x63/0xad vmemmap buf
[    0.000000]  [ffffea0151c00000-ffffea0189bfffff] PMD ->
[ffff88703fe00000-ffff887077dfffff] on node 6
[    0.000000] memblock_reserve: [0x807f5f5000-0x807f5f5fff]
__alloc_memory_core_early+0x63/0xad vmemmap block
[    0.000000]  [ffffea01c0000000-ffffea01ffffffff] PUD ->
ffff88807f5f5000 on node 7
[    0.000000]    memblock_free: [0x8077400000-0x807f3fffff]
[    0.000000]  [ffffea0189c00000-ffffea01c1bfffff] PMD ->
[ffff88803f400000-ffff8880773fffff] on node 7
[    0.000000]    memblock_free: [0x807f5f6000-0x807f9f5fff]
[    0.000000]    memblock_free: [0x807f9f9000-0x807fdf8fff]Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x08080000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000095
[    0.000000]     0: 0x00000100 -> 0x0007f750
[    0.000000]     0: 0x00100000 -> 0x01080000
[    0.000000]     1: 0x01080000 -> 0x02080000
[    0.000000]     2: 0x02080000 -> 0x03080000
[    0.000000]     3: 0x03080000 -> 0x04080000
[    0.000000]     4: 0x04080000 -> 0x05080000
[    0.000000]     5: 0x05080000 -> 0x06080000
[    0.000000]     6: 0x06080000 -> 0x07080000
[    0.000000]     7: 0x07080000 -> 0x08080000
[    0.000000] start - node_states[2]:
[    0.000000] On node 0 totalpages: 16774869
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000] memblock_reserve: [0x107ff9b000-0x107fff2fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 503688 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x107ff43000-0x107ff9afff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000]   Normal zone: 222208 pages used for memmap
[    0.000000]   Normal zone: 16030720 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x107feeb000-0x107ff42fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] On node 1 totalpages: 16777216
[    0.000000]   Normal zone: 229376 pages used for memmap
[    0.000000]   Normal zone: 16547840 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x207ff9d000-0x207fff4fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] On node 2 totalpages: 16777216
[    0.000000]   Normal zone: 229376 pages used for memmap
[    0.000000]   Normal zone: 16547840 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x307ff9d000-0x307fff4fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] On node 3 totalpages: 16777216
[    0.000000]   Normal zone: 229376 pages used for memmap
[    0.000000]   Normal zone: 16547840 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x407ff9d000-0x407fff4fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] On node 4 totalpages: 16777216
[    0.000000]   Normal zone: 229376 pages used for memmap
[    0.000000]   Normal zone: 16547840 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x507ff9d000-0x507fff4fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] On node 5 totalpages: 16777216
[    0.000000]   Normal zone: 229376 pages used for memmap
[    0.000000]   Normal zone: 16547840 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x607ff9d000-0x607fff4fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] On node 6 totalpages: 16777216
[    0.000000]   Normal zone: 229376 pages used for memmap
[    0.000000]   Normal zone: 16547840 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x707ff9d000-0x707fff4fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] On node 7 totalpages: 16777216
[    0.000000]   Normal zone: 229376 pages used for memmap
[    0.000000]   Normal zone: 16547840 pages, LIFO batch:31
[    0.000000] memblock_reserve: [0x807fda1000-0x807fdf8fff]
__alloc_memory_core_early+0x63/0xad pgdat
[    0.000000] after - node_states[2]: 0-7
[    0.000000] memblock_reserve: [0x807fda0000-0x807fda0fff]
__alloc_memory_core_early+0x63/0xad pgtable
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fb000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x20] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x22] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x24] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x26] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x30] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x32] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x34] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x36] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x40] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x42] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x44] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x46] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x50] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x52] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x54] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x56] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x60] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x62] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x64] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x66] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x70] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x72] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x74] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x76] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x80] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x82] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x84] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x86] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x90] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x92] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x94] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x96] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xa0] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xa2] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xa4] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xa6] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xb0] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xb2] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xb4] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xb6] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xc0] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xc2] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xc4] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xc6] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xd0] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xd2] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xd4] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xd6] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xe0] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xe2] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xe4] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xe6] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xf0] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xf2] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xf4] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0xf6] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x41] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x42] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x43] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x44] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x45] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x46] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x47] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x48] lapic_id[0x17] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x49] lapic_id[0x21] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x4a] lapic_id[0x23] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x4b] lapic_id[0x25] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x4c] lapic_id[0x27] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x4d] lapic_id[0x31] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x4e] lapic_id[0x33] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x4f] lapic_id[0x35] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x50] lapic_id[0x37] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x51] lapic_id[0x41] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x52] lapic_id[0x43] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x53] lapic_id[0x45] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x54] lapic_id[0x47] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x55] lapic_id[0x51] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x56] lapic_id[0x53] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x57] lapic_id[0x55] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x58] lapic_id[0x57] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x59] lapic_id[0x61] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x5a] lapic_id[0x63] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x5b] lapic_id[0x65] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x5c] lapic_id[0x67] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x5d] lapic_id[0x71] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x5e] lapic_id[0x73] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x5f] lapic_id[0x75] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x60] lapic_id[0x77] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x61] lapic_id[0x81] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x62] lapic_id[0x83] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x63] lapic_id[0x85] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x64] lapic_id[0x87] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x65] lapic_id[0x91] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x66] lapic_id[0x93] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x67] lapic_id[0x95] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x68] lapic_id[0x97] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x69] lapic_id[0xa1] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x6a] lapic_id[0xa3] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x6b] lapic_id[0xa5] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x6c] lapic_id[0xa7] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x6d] lapic_id[0xb1] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x6e] lapic_id[0xb3] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x6f] lapic_id[0xb5] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x70] lapic_id[0xb7] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x71] lapic_id[0xc1] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x72] lapic_id[0xc3] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x73] lapic_id[0xc5] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x74] lapic_id[0xc7] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x75] lapic_id[0xd1] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x76] lapic_id[0xd3] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x77] lapic_id[0xd5] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x78] lapic_id[0xd7] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x79] lapic_id[0xe1] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x7a] lapic_id[0xe3] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x7b] lapic_id[0xe5] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x7c] lapic_id[0xe7] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x7d] lapic_id[0xf1] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x7e] lapic_id[0xf3] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x7f] lapic_id[0xf5] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x80] lapic_id[0xf7] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000)
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec02000] gsi_base[24])
[    0.000000] mapped IOAPIC to ffffffffff5f9000 (fec02000)
[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec02000, GSI 24-47
[    0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[48])
[    0.000000] mapped IOAPIC to ffffffffff5f8000 (fec04000)
[    0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec04000, GSI 48-71
[    0.000000] ACPI: IOAPIC (id[0x0b] address[0xfec08000] gsi_base[72])
[    0.000000] mapped IOAPIC to ffffffffff5f7000 (fec08000)
[    0.000000] IOAPIC[3]: apic_id 11, version 32, address 0xfec08000, GSI 72-95
[    0.000000] ACPI: IOAPIC (id[0x0c] address[0xfec0c000] gsi_base[96])
[    0.000000] mapped IOAPIC to ffffffffff5f6000 (fec0c000)
[    0.000000] IOAPIC[4]: apic_id 12, version 32, address 0xfec0c000, GSI 96-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 8,
APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 8,
APIC INT 09
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 8,
APIC INT 01
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 8,
APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 8,
APIC INT 04
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 8,
APIC INT 05
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 8,
APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 8,
APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 8,
APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 8,
APIC INT 0a
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 8,
APIC INT 0b
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 8,
APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 8,
APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 8,
APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 8,
APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] memblock_reserve: [0x807fe00f80-0x807fe00fc0]
__alloc_memory_core_early+0x63/0xad hpet res
[    0.000000] SMP: Allowing 128 CPUs, 0 hotplug CPUs
[    0.000000] memblock_reserve: [0x807fe00e00-0x807fe00f4e]
__alloc_memory_core_early+0x63/0xad ioapic res
[    0.000000] nr_irqs_gsi: 136
[    0.000000] memblock_reserve: [0x807fe00b00-0x807fe00dd7]
__alloc_memory_core_early+0x63/0xad e820 resources
[    0.000000] memblock_reserve: [0x807fe00a80-0x807fe00ae7]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00a00-0x807fe00a67]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00980-0x807fe009e7]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00900-0x807fe00967]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00880-0x807fe008e7]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00800-0x807fe00867]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00780-0x807fe007e7]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00700-0x807fe00767]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00680-0x807fe006e7]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00600-0x807fe00667]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00580-0x807fe005e7]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] memblock_reserve: [0x807fe00500-0x807fe00567]
__alloc_memory_core_early+0x63/0xad firmware map
[    0.000000] Allocating PCI resources starting at 90000000 (gap:
90000000:6ee00000)
[    0.000000] memblock_reserve: [0x807fe00400-0x807fe004d9]
__alloc_memory_core_early+0x63/0xad saved_command_l
[    0.000000] memblock_reserve: [0x807fe00300-0x807fe003d9]
__alloc_memory_core_early+0x63/0xad static_command_
[    0.000000] setup_percpu: NR_CPUS:255 nr_cpumask_bits:255
nr_cpu_ids:128 nr_node_ids:8
[    0.000000] memblock_reserve: [0x807fd9f000-0x807fd9ffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc_info
[    0.000000] memblock_reserve: [0x807fd9e000-0x807fd9efff]
__alloc_memory_core_early+0x63/0xad pcpu area
[    0.000000] memblock_reserve: [0x107de00000-0x107fdfffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x107dfdb000-0x107dffffff]
[    0.000000]    memblock_free: [0x107e1db000-0x107e1fffff]
[    0.000000]    memblock_free: [0x107e3db000-0x107e3fffff]
[    0.000000]    memblock_free: [0x107e5db000-0x107e5fffff]
[    0.000000]    memblock_free: [0x107e7db000-0x107e7fffff]
[    0.000000]    memblock_free: [0x107e9db000-0x107e9fffff]
[    0.000000]    memblock_free: [0x107ebdb000-0x107ebfffff]
[    0.000000]    memblock_free: [0x107eddb000-0x107edfffff]
[    0.000000]    memblock_free: [0x107efdb000-0x107effffff]
[    0.000000]    memblock_free: [0x107f1db000-0x107f1fffff]
[    0.000000]    memblock_free: [0x107f3db000-0x107f3fffff]
[    0.000000]    memblock_free: [0x107f5db000-0x107f5fffff]
[    0.000000]    memblock_free: [0x107f7db000-0x107f7fffff]
[    0.000000]    memblock_free: [0x107f9db000-0x107f9fffff]
[    0.000000]    memblock_free: [0x107fbdb000-0x107fbfffff]
[    0.000000]    memblock_free: [0x107fddb000-0x107fdfffff]
[    0.000000] memblock_reserve: [0x207de00000-0x207fdfffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x207dfdb000-0x207dffffff]
[    0.000000]    memblock_free: [0x207e1db000-0x207e1fffff]
[    0.000000]    memblock_free: [0x207e3db000-0x207e3fffff]
[    0.000000]    memblock_free: [0x207e5db000-0x207e5fffff]
[    0.000000]    memblock_free: [0x207e7db000-0x207e7fffff]
[    0.000000]    memblock_free: [0x207e9db000-0x207e9fffff]
[    0.000000]    memblock_free: [0x207ebdb000-0x207ebfffff]
[    0.000000]    memblock_free: [0x207eddb000-0x207edfffff]
[    0.000000]    memblock_free: [0x207efdb000-0x207effffff]
[    0.000000]    memblock_free: [0x207f1db000-0x207f1fffff]
[    0.000000]    memblock_free: [0x207f3db000-0x207f3fffff]
[    0.000000]    memblock_free: [0x207f5db000-0x207f5fffff]
[    0.000000]    memblock_free: [0x207f7db000-0x207f7fffff]
[    0.000000]    memblock_free: [0x207f9db000-0x207f9fffff]
[    0.000000]    memblock_free: [0x207fbdb000-0x207fbfffff]
[    0.000000]    memblock_free: [0x207fddb000-0x207fdfffff]
[    0.000000] memblock_reserve: [0x307de00000-0x307fdfffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x307dfdb000-0x307dffffff]
[    0.000000]    memblock_free: [0x307e1db000-0x307e1fffff]
[    0.000000]    memblock_free: [0x307e3db000-0x307e3fffff]
[    0.000000]    memblock_free: [0x307e5db000-0x307e5fffff]
[    0.000000]    memblock_free: [0x307e7db000-0x307e7fffff]
[    0.000000]    memblock_free: [0x307e9db000-0x307e9fffff]
[    0.000000]    memblock_free: [0x307ebdb000-0x307ebfffff]
[    0.000000]    memblock_free: [0x307eddb000-0x307edfffff]
[    0.000000]    memblock_free: [0x307efdb000-0x307effffff]
[    0.000000]    memblock_free: [0x307f1db000-0x307f1fffff]
[    0.000000]    memblock_free: [0x307f3db000-0x307f3fffff]
[    0.000000]    memblock_free: [0x307f5db000-0x307f5fffff]
[    0.000000]    memblock_free: [0x307f7db000-0x307f7fffff]
[    0.000000]    memblock_free: [0x307f9db000-0x307f9fffff]
[    0.000000]    memblock_free: [0x307fbdb000-0x307fbfffff]
[    0.000000]    memblock_free: [0x307fddb000-0x307fdfffff]
[    0.000000] memblock_reserve: [0x407de00000-0x407fdfffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x407dfdb000-0x407dffffff]
[    0.000000]    memblock_free: [0x407e1db000-0x407e1fffff]
[    0.000000]    memblock_free: [0x407e3db000-0x407e3fffff]
[    0.000000]    memblock_free: [0x407e5db000-0x407e5fffff]
[    0.000000]    memblock_free: [0x407e7db000-0x407e7fffff]
[    0.000000]    memblock_free: [0x407e9db000-0x407e9fffff]
[    0.000000]    memblock_free: [0x407ebdb000-0x407ebfffff]
[    0.000000]    memblock_free: [0x407eddb000-0x407edfffff]
[    0.000000]    memblock_free: [0x407efdb000-0x407effffff]
[    0.000000]    memblock_free: [0x407f1db000-0x407f1fffff]
[    0.000000]    memblock_free: [0x407f3db000-0x407f3fffff]
[    0.000000]    memblock_free: [0x407f5db000-0x407f5fffff]
[    0.000000]    memblock_free: [0x407f7db000-0x407f7fffff]
[    0.000000]    memblock_free: [0x407f9db000-0x407f9fffff]
[    0.000000]    memblock_free: [0x407fbdb000-0x407fbfffff]
[    0.000000]    memblock_free: [0x407fddb000-0x407fdfffff]
[    0.000000] memblock_reserve: [0x507de00000-0x507fdfffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x507dfdb000-0x507dffffff]
[    0.000000]    memblock_free: [0x507e1db000-0x507e1fffff]
[    0.000000]    memblock_free: [0x507e3db000-0x507e3fffff]
[    0.000000]    memblock_free: [0x507e5db000-0x507e5fffff]
[    0.000000]    memblock_free: [0x507e7db000-0x507e7fffff]
[    0.000000]    memblock_free: [0x507e9db000-0x507e9fffff]
[    0.000000]    memblock_free: [0x507ebdb000-0x507ebfffff]
[    0.000000]    memblock_free: [0x507eddb000-0x507edfffff]
[    0.000000]    memblock_free: [0x507efdb000-0x507effffff]
[    0.000000]    memblock_free: [0x507f1db000-0x507f1fffff]
[    0.000000]    memblock_free: [0x507f3db000-0x507f3fffff]
[    0.000000]    memblock_free: [0x507f5db000-0x507f5fffff]
[    0.000000]    memblock_free: [0x507f7db000-0x507f7fffff]
[    0.000000]    memblock_free: [0x507f9db000-0x507f9fffff]
[    0.000000]    memblock_free: [0x507fbdb000-0x507fbfffff]
[    0.000000]    memblock_free: [0x507fddb000-0x507fdfffff]
[    0.000000] memblock_reserve: [0x607de00000-0x607fdfffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x607dfdb000-0x607dffffff]
[    0.000000]    memblock_free: [0x607e1db000-0x607e1fffff]
[    0.000000]    memblock_free: [0x607e3db000-0x607e3fffff]
[    0.000000]    memblock_free: [0x607e5db000-0x607e5fffff]
[    0.000000]    memblock_free: [0x607e7db000-0x607e7fffff]
[    0.000000]    memblock_free: [0x607e9db000-0x607e9fffff]
[    0.000000] memblock: reserved array is doubled to 256 at
[0x807fd9c800-0x807fd9dfff]
[    0.000000] memblock_reserve: [0x807fd9c800-0x807fd9dfff]
memblock_reserve+0x10/0x12
[    0.000000]    memblock_free: [0x607ebdb000-0x607ebfffff]
[    0.000000]    memblock_free: [0x607eddb000-0x607edfffff]
[    0.000000]    memblock_free: [0x607efdb000-0x607effffff]
[    0.000000]    memblock_free: [0x607f1db000-0x607f1fffff]
[    0.000000]    memblock_free: [0x607f3db000-0x607f3fffff]
[    0.000000]    memblock_free: [0x607f5db000-0x607f5fffff]
[    0.000000]    memblock_free: [0x607f7db000-0x607f7fffff]
[    0.000000]    memblock_free: [0x607f9db000-0x607f9fffff]
[    0.000000]    memblock_free: [0x607fbdb000-0x607fbfffff]
[    0.000000]    memblock_free: [0x607fddb000-0x607fdfffff]
[    0.000000] memblock_reserve: [0x707de00000-0x707fdfffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x707dfdb000-0x707dffffff]
[    0.000000]    memblock_free: [0x707e1db000-0x707e1fffff]
[    0.000000]    memblock_free: [0x707e3db000-0x707e3fffff]
[    0.000000]    memblock_free: [0x707e5db000-0x707e5fffff]
[    0.000000]    memblock_free: [0x707e7db000-0x707e7fffff]
[    0.000000]    memblock_free: [0x707e9db000-0x707e9fffff]
[    0.000000]    memblock_free: [0x707ebdb000-0x707ebfffff]
[    0.000000]    memblock_free: [0x707eddb000-0x707edfffff]
[    0.000000]    memblock_free: [0x707efdb000-0x707effffff]
[    0.000000]    memblock_free: [0x707f1db000-0x707f1fffff]
[    0.000000]    memblock_free: [0x707f3db000-0x707f3fffff]
[    0.000000]    memblock_free: [0x707f5db000-0x707f5fffff]
[    0.000000]    memblock_free: [0x707f7db000-0x707f7fffff]
[    0.000000]    memblock_free: [0x707f9db000-0x707f9fffff]
[    0.000000]    memblock_free: [0x707fbdb000-0x707fbfffff]
[    0.000000]    memblock_free: [0x707fddb000-0x707fdfffff]
[    0.000000] memblock_reserve: [0x807d400000-0x807f3fffff]
__alloc_memory_core_early+0x63/0xad pcpu_alloc
[    0.000000]    memblock_free: [0x807d5db000-0x807d5fffff]
[    0.000000]    memblock_free: [0x807d7db000-0x807d7fffff]
[    0.000000]    memblock_free: [0x807d9db000-0x807d9fffff]
[    0.000000]    memblock_free: [0x807dbdb000-0x807dbfffff]
[    0.000000]    memblock_free: [0x807dddb000-0x807ddfffff]
[    0.000000]    memblock_free: [0x807dfdb000-0x807dffffff]
[    0.000000]    memblock_free: [0x807e1db000-0x807e1fffff]
[    0.000000]    memblock_free: [0x807e3db000-0x807e3fffff]
[    0.000000]    memblock_free: [0x807e5db000-0x807e5fffff]
[    0.000000]    memblock_free: [0x807e7db000-0x807e7fffff]
[    0.000000]    memblock_free: [0x807e9db000-0x807e9fffff]
[    0.000000]    memblock_free: [0x807ebdb000-0x807ebfffff]
[    0.000000]    memblock_free: [0x807eddb000-0x807edfffff]
[    0.000000]    memblock_free: [0x807efdb000-0x807effffff]
[    0.000000]    memblock_free: [0x807f1db000-0x807f1fffff]
[    0.000000]    memblock_free: [0x807f3db000-0x807f3fffff]
[    0.000000] PERCPU: Embedded 475 pages/cpu @ffff88107de00000
s1913304 r8192 d24104 u2097152
[    0.000000] memblock_reserve: [0x807fe002c0-0x807fe002ff]
__alloc_memory_core_early+0x63/0xad pcpu group_offs
[    0.000000] memblock_reserve: [0x807fe00280-0x807fe002bf]
__alloc_memory_core_early+0x63/0xad pcpu group_size
[    0.000000] memblock_reserve: [0x807fe00080-0x807fe0027f]
__alloc_memory_core_early+0x63/0xad pcpu unit_map
[    0.000000] memblock_reserve: [0x807fd9c400-0x807fd9c7ff]
__alloc_memory_core_early+0x63/0xad pcpu unit_off
[    0.000000] pcpu-alloc: s1913304 r8192 d24104 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 000 [0] 001 [0] 002 [0] 003
[    0.000000] pcpu-alloc: [0] 004 [0] 005 [0] 006 [0] 007
[    0.000000] pcpu-alloc: [0] 064 [0] 065 [0] 066 [0] 067
[    0.000000] pcpu-alloc: [0] 068 [0] 069 [0] 070 [0] 071
[    0.000000] pcpu-alloc: [1] 008 [1] 009 [1] 010 [1] 011
[    0.000000] pcpu-alloc: [1] 012 [1] 013 [1] 014 [1] 015
[    0.000000] pcpu-alloc: [1] 072 [1] 073 [1] 074 [1] 075
[    0.000000] pcpu-alloc: [1] 076 [1] 077 [1] 078 [1] 079
[    0.000000] pcpu-alloc: [2] 016 [2] 017 [2] 018 [2] 019
[    0.000000] pcpu-alloc: [2] 020 [2] 021 [2] 022 [2] 023
[    0.000000] pcpu-alloc: [2] 080 [2] 081 [2] 082 [2] 083
[    0.000000] pcpu-alloc: [2] 084 [2] 085 [2] 086 [2] 087
[    0.000000] pcpu-alloc: [3] 024 [3] 025 [3] 026 [3] 027
[    0.000000] pcpu-alloc: [3] 028 [3] 029 [3] 030 [3] 031
[    0.000000] pcpu-alloc: [3] 088 [3] 089 [3] 090 [3] 091
[    0.000000] pcpu-alloc: [3] 092 [3] 093 [3] 094 [3] 095
[    0.000000] pcpu-alloc: [4] 032 [4] 033 [4] 034 [4] 035
[    0.000000] pcpu-alloc: [4] 036 [4] 037 [4] 038 [4] 039
[    0.000000] pcpu-alloc: [4] 096 [4] 097 [4] 098 [4] 099
[    0.000000] pcpu-alloc: [4] 100 [4] 101 [4] 102 [4] 103
[    0.000000] pcpu-alloc: [5] 040 [5] 041 [5] 042 [5] 043
[    0.000000] pcpu-alloc: [5] 044 [5] 045 [5] 046 [5] 047
[    0.000000] pcpu-alloc: [5] 104 [5] 105 [5] 106 [5] 107
[    0.000000] pcpu-alloc: [5] 108 [5] 109 [5] 110 [5] 111
[    0.000000] pcpu-alloc: [6] 048 [6] 049 [6] 050 [6] 051
[    0.000000] pcpu-alloc: [6] 052 [6] 053 [6] 054 [6] 055
[    0.000000] pcpu-alloc: [6] 112 [6] 113 [6] 114 [6] 115
[    0.000000] pcpu-alloc: [6] 116 [6] 117 [6] 118 [6] 119
[    0.000000] pcpu-alloc: [7] 056 [7] 057 [7] 058 [7] 059
[    0.000000] pcpu-alloc: [7] 060 [7] 061 [7] 062 [7] 063
[    0.000000] pcpu-alloc: [7] 120 [7] 121 [7] 122 [7] 123
[    0.000000] pcpu-alloc: [7] 124 [7] 125 [7] 126 [7] 127
[    0.000000] memblock_reserve: [0x807fd9c280-0x807fd9c3cf]
__alloc_memory_core_early+0x63/0xad pcpu slot
[    0.000000] memblock_reserve: [0x807fd9c200-0x807fd9c27f]
__alloc_memory_core_early+0x63/0xad pcpu chunk_stru
[    0.000000] memblock_reserve: [0x807fd9c180-0x807fd9c1ff]
__alloc_memory_core_early+0x63/0xad pcpu chunk_stru
[    0.000000]    memblock_free: [0x807fd9f000-0x807fd9ffff]
[    0.000000]    memblock_free: [0x807fd9e000-0x807fd9efff]
[    0.000000] build_zonelists: local_node: 0 next_best_node: 0 1 3 4 2 5 6 7
[    0.000000] build_zonelists: local_node: 1 next_best_node: 1 5 2 0 3 4 6 7
[    0.000000] build_zonelists: local_node: 2 next_best_node: 2 6 3 1 4 7 5 0
[    0.000000] build_zonelists: local_node: 3 next_best_node: 3 7 0 2 4 5 6 1
[    0.000000] build_zonelists: local_node: 4 next_best_node: 4 5 6 0 7 2 3 1
[    0.000000] build_zonelists: local_node: 5 next_best_node: 5 7 4 1 6 0 2 3
[    0.000000] build_zonelists: local_node: 6 next_best_node: 6 7 2 4 0 3 1 5
[    0.000000] build_zonelists: local_node: 7 next_best_node: 7 3 6 5 0 2 4 1
[    0.000000] Built 8 zonelists in Zone order, mobility grouping on.
Total pages: 132373200
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=uart8250,io,0x3f8,115200n8
initrd=kernel.org/x.gz rw root=/dev/ram0 debug ignore_loglevel
unknown_nmi_panic initcall_debug apic=debug pci=routeirq ip=dhcp
load_ramdisk=1 BOOT_IMAGE=kernel.org/bzImage_3.0_k8.2
[    0.000000] memblock_reserve: [0x807fd94180-0x807fd9c17f]
__alloc_memory_core_early+0x63/0xad large system ha
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] memblock_reserve: [0x77af3000-0x7baf2fff]
__alloc_memory_core_early+0x63/0xad swiotlb buffer
[    0.000000] memblock_reserve: [0x807fd74000-0x807fd93fff]
__alloc_memory_core_early+0x63/0xad swiotlb list
[    0.000000] memblock_reserve: [0x807fd34000-0x807fd73fff]
__alloc_memory_core_early+0x63/0xad swiotlb orig_ad
[    0.000000] memblock_reserve: [0x7f746000-0x7f74dfff]
__alloc_memory_core_early+0x63/0xad swiotlb overflo
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Queued invalidation will be enabled to support x2apic
and Intr-remapping.
[    0.000000]    memblock_free: [0x807fd9c800-0x807fd9dfff]
[    0.000000] memblock_reserve: [0x807fd9c800-0x807fd9dfff]
memblock_reserve+0x10/0x12

Re: [PATCH 13/13] memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

[Tejun Heo]

Hello, Yinghai.

On Tue, Jul 26, 2011 at 05:59:13PM -0700, Yinghai Lu wrote:
> yes, with bootmem wrap stage, the print out are all the same.
> 
> will have
> __alloc_memory_core_early+0x63
> everywhere.
> 
> add name print out for comparing, name could give some hint.

The better solution would be making __alloc_memory_core_early() pass
in its caller and print it out.  I don't think requiring pretty name
just for debugging is a good or scalable idea.  There's no reason to
bother API users with it.

Thanks.

-- 
tejun