From: "Arend van Spriel" <arend@broadcom.com>
To: "Nico Schottelius" <nico-linux-20120113@schottelius.org>,
LKML <linux-kernel@vger.kernel.org>,
b43-dev@lists.infradead.org, netdev@vger.kernel.org
Subject: Re: brcmsmac: 3.2.0-06100: no device shown (and hangs in 3.2.0-rc7)
Date: Fri, 13 Jan 2012 14:36:57 +0100 [thread overview]
Message-ID: <4F103379.2050904@broadcom.com> (raw)
In-Reply-To: <20120113124559.GA2260@schottelius.org>
On 01/13/2012 01:45 PM, Nico Schottelius wrote:
> Hello,
>
> with 3.2.0-06100-ge343a89 brcmsmac does not get autoloaded anymore
> from udev. Loading it manually returns in dmesg:
>
> --------------------------------------------------------------------------------
> [ 247.495705] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800,
> rev 0x22, class 0x0)
> [ 247.495749] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812,
> rev 0x17, class 0x0)
> [ 247.495832] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev
> 0x0F, class 0x0)
> [ 247.560553] bcma: Unsupported SPROM revision: 255
> [ 247.560563] bcma: No SPROM available
> [ 247.560852] bcma: Bus registered
> [ 247.611789] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
> [ 247.634051] ieee80211 phy0: wl0: brcms_b_attach: si_attach failed
> [ 247.634062] ieee80211 phy0: wl0: brcms_b_attach: failed with err 11
> [ 247.634069] ieee80211 phy0: wl0: brcms_c_attach: failed with err 11
> [ 247.634111] ieee80211 phy0: brcmsmac: attach() failed with code 11
> [ 247.634128] brcmsmac: brcms_bcma_probe: brcms_attach failed!
> --------------------------------------------------------------------------------
>
> And ip does not show any device:
>
> --------------------------------------------------------------------------------
> [13:37] brief:~% ip l
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> --------------------------------------------------------------------------------
>
> With 3.2.0-rc7 the device works, until it begins to hang. As reported
> many times before. As I've switched the environment, it is very good
> probable that an AP on channel 13 is in range.
>
> Attached both dmesg/lsmod/configs.
>
> Cheers,
>
> Nico
>
Could this be on your MacBook Air? If so, Linus has flagged and solved
this issue (see thread "brcm80211 breakage" on netdev mailer).
Gr. AvS
next prev parent reply other threads:[~2012-01-13 13:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-13 12:45 brcmsmac: 3.2.0-06100: no device shown (and hangs in 3.2.0-rc7) Nico Schottelius
2012-01-13 13:36 ` Arend van Spriel [this message]
2012-01-13 14:18 ` Nico Schottelius
2012-01-13 14:20 ` Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F103379.2050904@broadcom.com \
--to=arend@broadcom.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nico-linux-20120113@schottelius.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).