linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jan Kiszka <jan.kiszka@siemens.com>
To: Eric B Munson <emunson@mgebm.net>
Cc: avi@redhat.com, mingo@redhat.com, hpa@zytor.com,
	ryanh@linux.vnet.ibm.com, aliguori@us.ibm.com,
	mtosatti@redhat.com, jeremy.fitzhardinge@citrix.com,
	kvm@vger.kernel.org, linux-arch@vger.kernel.org, x86@kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/4 V9] Add ioctl for KVMCLOCK_GUEST_STOPPED
Date: Tue, 17 Jan 2012 19:20:19 +0100	[thread overview]
Message-ID: <4F15BBE3.4090800@siemens.com> (raw)
In-Reply-To: <1326823488-11413-4-git-send-email-emunson@mgebm.net>

On 2012-01-17 19:04, Eric B Munson wrote:
> Now that we have a flag that will tell the guest it was suspended, create an
> interface for that communication using a KVM ioctl.
> 
> Signed-off-by: Eric B Munson <emunson@mgebm.net>
> 
> Cc: mingo@redhat.com
> Cc: hpa@zytor.com
> Cc: ryanh@linux.vnet.ibm.com
> Cc: aliguori@us.ibm.com
> Cc: mtosatti@redhat.com
> Cc: jeremy.fitzhardinge@citrix.com
> Cc: kvm@vger.kernel.org
> Cc: linux-arch@vger.kernel.org
> Cc: x86@kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> Changes from V8:
>  Make KVM_GUEST_PAUSED a per vm ioctl instead of per vcpu
> 
> Changes from V7:
>  Define KVM_CAP_GUEST_PAUSED and support check
>  Call mark_page_dirty () after setting PVCLOCK_GUEST_STOPPED
> 
> Changes from V4:
>  Rename KVM_GUEST_PAUSED to KVMCLOCK_GUEST_PAUSED
>  Add new ioctl description to api.txt
> 
>  Documentation/virtual/kvm/api.txt |   13 +++++++++++++
>  arch/x86/kvm/x86.c                |   26 ++++++++++++++++++++++++++
>  include/linux/kvm.h               |    3 +++
>  3 files changed, 42 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index e1d94bf..1931e5c 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -1491,6 +1491,19 @@ following algorithm:
>  Some guests configure the LINT1 NMI input to cause a panic, aiding in
>  debugging.
>  
> +4.65 KVMCLOCK_GUEST_PAUSED
> +
> +Capability: KVM_CAP_GUEST_PAUSED
> +Architechtures: Any that implement pvclocks (currently x86 only)
> +Type: vcpu ioctl
> +Parameters: None
> +Returns: 0 on success, -1 on error
> +
> +This signals to the host kernel that the specified guest is being paused by
> +userspace.  The host will set a flag in the pvclock structure that is checked
> +from the soft lockup watchdog.  This ioctl can be called during pause or
> +unpause.
> +
>  5. The kvm_run structure
>  
>  Application code obtains a pointer to the kvm_run structure by
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 14d6cad..4661abe 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -2056,6 +2056,7 @@ int kvm_dev_ioctl_check_extension(long ext)
>  	case KVM_CAP_X86_ROBUST_SINGLESTEP:
>  	case KVM_CAP_XSAVE:
>  	case KVM_CAP_ASYNC_PF:
> +	case KVM_CAP_GUEST_PAUSED:
>  	case KVM_CAP_GET_TSC_KHZ:
>  		r = 1;
>  		break;
> @@ -3061,6 +3062,27 @@ out:
>  	return r;
>  }
>  
> +/*
> + * kvm_set_guest_paused() indicates to the guest kernel that it has been
> + * stopped by the hypervisor.  This function will be called from the host only.
> + */
> +static int kvm_set_guest_paused(struct kvm *kvm)
> +{
> +	struct kvm_vcpu *vcpu;
> +	struct pvclock_vcpu_time_info *src;
> +	int i;
> +
> +	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
> +		vcpu = kvm->vcpus[i];

kvm_for_each_vcpu?

> +		if (!vcpu->arch.time_page)
> +			continue;
> +		src = &vcpu->arch.hv_clock;
> +		src->flags |= PVCLOCK_GUEST_STOPPED;
> +		mark_page_dirty(vcpu->kvm, vcpu->arch.time >> PAGE_SHIFT);
> +	}
> +	return 0;
> +}
> +
>  long kvm_arch_vm_ioctl(struct file *filp,
>  		       unsigned int ioctl, unsigned long arg)
>  {
> @@ -3351,6 +3373,10 @@ long kvm_arch_vm_ioctl(struct file *filp,
>  		r = 0;
>  		break;
>  	}
> +	case KVMCLOCK_GUEST_PAUSED: {
> +		r = kvm_set_guest_paused(kvm);
> +		break;
> +	}
>  
>  	default:
>  		;
> diff --git a/include/linux/kvm.h b/include/linux/kvm.h
> index 68e67e5..4ffe0df 100644
> --- a/include/linux/kvm.h
> +++ b/include/linux/kvm.h
> @@ -558,6 +558,7 @@ struct kvm_ppc_pvinfo {
>  #define KVM_CAP_PPC_PAPR 68
>  #define KVM_CAP_S390_GMAP 71
>  #define KVM_CAP_TSC_DEADLINE_TIMER 72
> +#define KVM_CAP_GUEST_PAUSED 73
>  
>  #ifdef KVM_CAP_IRQ_ROUTING
>  
> @@ -763,6 +764,8 @@ struct kvm_clock_data {
>  #define KVM_CREATE_SPAPR_TCE	  _IOW(KVMIO,  0xa8, struct kvm_create_spapr_tce)
>  /* Available with KVM_CAP_RMA */
>  #define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
> +/* VM is being stopped by host */
> +#define KVMCLOCK_GUEST_PAUSED	  _IO(KVMIO,   0xaa)
>  
>  #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
>  

Jan

-- 
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux

  reply	other threads:[~2012-01-17 18:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-17 18:04 [PATCH 0/4 V9] Avoid soft lockup message when KVM is stopped by host Eric B Munson
2012-01-17 18:04 ` [PATCH 1/4 V9] Add flag to indicate that a vm was stopped by the host Eric B Munson
2012-01-17 18:04 ` [PATCH 2/4 V9] Add functions to check if the host has stopped the vm Eric B Munson
2012-01-17 18:04 ` [PATCH 3/4 V9] Add ioctl for KVMCLOCK_GUEST_STOPPED Eric B Munson
2012-01-17 18:20   ` Jan Kiszka [this message]
2012-01-17 18:04 ` [PATCH 4/4 V9] Add check for suspended vm in softlockup detector Eric B Munson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F15BBE3.4090800@siemens.com \
    --to=jan.kiszka@siemens.com \
    --cc=aliguori@us.ibm.com \
    --cc=avi@redhat.com \
    --cc=emunson@mgebm.net \
    --cc=hpa@zytor.com \
    --cc=jeremy.fitzhardinge@citrix.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=mtosatti@redhat.com \
    --cc=ryanh@linux.vnet.ibm.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).