From: Rob Herring <robherring2@gmail.com>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
devicetree-discuss@lists.ozlabs.org,
Milton Miller <miltonm@bga.com>,
benh@kernel.crashing.org, Shawn Guo <shawn.guo@linaro.org>,
Benoit Cousson <b-cousson@ti.com>
Subject: Re: [RFCv2 00/14]
Date: Mon, 23 Jan 2012 15:53:35 -0600 [thread overview]
Message-ID: <4F1DD6DF.4080706@gmail.com> (raw)
In-Reply-To: <1327352870-14687-1-git-send-email-grant.likely@secretlab.ca>
On 01/23/2012 03:07 PM, Grant Likely wrote:
>
> Hey everyone,
>
> Here's the second RFC for the irq_domain patches. I could use some
> help testing now. I still expect there will be a few bugs. The
> series is based on v3.3-rc1, and I've pushed it out to my git server:
>
> git://git.secretlab.ca/git/linux-2.6.git irqdomain/next
Can you post to linux-arm-kernel too so people are aware of this work
and stop posting dead-end irqdomain patches.
I tested what you had as of this morning and it works fine for me. Looks
like the only diff is the VExpress code. I'm working on rebasing my
domain support for generic irqchip now.
Rob
> On Wed, Jan 11, 2012 at 1:22 PM, Grant Likely <grant.likely@secretlab.ca> wrote:
>> Here are the patches that I've been working on to finish up the creation
>> of the generic irq_domain infrastructure.
>>
>> I'm taking a different approach that I originally intended.
>> Originally I intended to start with the basic design of irq_host from
>> powerpc, but there were some things about the implementation that I
>> didn't like, so I was going to reimplement those bits and then migrate
>> powerpc over to use it. That was a mistake and would have resulted in
>> a lot more work. Instead, I should have started with the powerpc
>> irq_host code, moved it to a common location, and then reworked it in
>> place. The powerpc code is working and well tested. It is a lot less
>> risky to use it as the starting point with a nicely bisectable series
>> of changes to make it do what other architectures need.
>
> [RFCv2 01/14] irq_domain: add documentation and MAINTAINERS entry.
> [RFCv2 02/14] dt: Make irqdomain less verbose
> [RFCv2 03/14] irq_domain: Make irq_domain structure match powerpc's
> [RFCv2 04/14] irq_domain: convert microblaze from irq_host to
> [RFCv2 05/14] irq_domain/powerpc: Use common irq_domain structure
> [RFCv2 06/14] irq_domain/powerpc: eliminate irq_map; use
> [RFCv2 07/14] irq_domain/powerpc: Eliminate virq_is_host()
> [RFCv2 08/14] irq_domain: Move irq_domain code from powerpc to
> [RFCv2 09/14] irqdomain: remove NO_IRQ from irq domain code
> [RFCv2 10/14] irq_domain: Remove references to old irq_host names
> [RFCv2 11/14] irq_domain: Replace irq_alloc_host() with
> [RFCv2 12/14] irq_domain: Add support for base irq and hwirq in
> [RFCv2 13/14] irq_domain: Remove 'new' irq_domain in favour of the
> [RFCv2 14/14] irq_domain: Remove irq_domain_add_simple()
>
> Documentation/IRQ-domain.txt | 113 ++++
> MAINTAINERS | 9 +
> arch/arm/common/gic.c | 97 ++--
> arch/arm/common/vic.c | 16 +-
> arch/arm/include/asm/hardware/gic.h | 4 +-
> arch/arm/include/asm/hardware/vic.h | 2 +
> arch/arm/mach-exynos/common.c | 2 +-
> arch/arm/mach-imx/mach-imx6q.c | 3 +-
> arch/arm/mach-msm/board-msm8x60.c | 8 +-
> arch/arm/mach-mx5/imx51-dt.c | 4 +-
> arch/arm/mach-mx5/imx53-dt.c | 4 +-
> arch/arm/mach-omap2/board-generic.c | 2 +-
> arch/arm/mach-prima2/irq.c | 2 +-
> arch/arm/mach-versatile/core.c | 5 +-
> arch/microblaze/include/asm/irq.h | 4 +-
> arch/microblaze/kernel/irq.c | 2 +-
> arch/microblaze/kernel/setup.c | 2 -
> arch/powerpc/Kconfig | 1 +
> arch/powerpc/include/asm/ehv_pic.h | 2 +-
> arch/powerpc/include/asm/i8259.h | 2 +-
> arch/powerpc/include/asm/irq.h | 247 +-------
> arch/powerpc/include/asm/mpic.h | 2 +-
> arch/powerpc/include/asm/xics.h | 2 +-
> arch/powerpc/kernel/irq.c | 617 +------------------
> arch/powerpc/platforms/512x/mpc5121_ads_cpld.c | 12 +-
> arch/powerpc/platforms/52xx/media5200.c | 15 +-
> arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 16 +-
> arch/powerpc/platforms/52xx/mpc52xx_pic.c | 12 +-
> arch/powerpc/platforms/82xx/pq2ads-pci-pic.c | 14 +-
> arch/powerpc/platforms/85xx/socrates_fpga_pic.c | 15 +-
> arch/powerpc/platforms/86xx/gef_pic.c | 15 +-
> arch/powerpc/platforms/cell/axon_msi.c | 29 +-
> arch/powerpc/platforms/cell/beat_interrupt.c | 16 +-
> arch/powerpc/platforms/cell/interrupt.c | 16 +-
> arch/powerpc/platforms/cell/spider-pic.c | 14 +-
> arch/powerpc/platforms/embedded6xx/flipper-pic.c | 30 +-
> arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 35 +-
> arch/powerpc/platforms/iseries/irq.c | 11 +-
> arch/powerpc/platforms/powermac/pic.c | 15 +-
> arch/powerpc/platforms/powermac/smp.c | 9 +-
> arch/powerpc/platforms/ps3/interrupt.c | 11 +-
> arch/powerpc/platforms/wsp/opb_pic.c | 15 +-
> arch/powerpc/sysdev/cpm1.c | 9 +-
> arch/powerpc/sysdev/cpm2_pic.c | 11 +-
> arch/powerpc/sysdev/ehv_pic.c | 14 +-
> arch/powerpc/sysdev/fsl_msi.c | 10 +-
> arch/powerpc/sysdev/fsl_msi.h | 2 +-
> arch/powerpc/sysdev/i8259.c | 15 +-
> arch/powerpc/sysdev/ipic.c | 15 +-
> arch/powerpc/sysdev/ipic.h | 2 +-
> arch/powerpc/sysdev/mpc8xx_pic.c | 11 +-
> arch/powerpc/sysdev/mpic.c | 17 +-
> arch/powerpc/sysdev/mpic_msi.c | 2 +-
> arch/powerpc/sysdev/mv64x60_pic.c | 11 +-
> arch/powerpc/sysdev/qe_lib/qe_ic.c | 13 +-
> arch/powerpc/sysdev/qe_lib/qe_ic.h | 2 +-
> arch/powerpc/sysdev/tsi108_pci.c | 13 +-
> arch/powerpc/sysdev/uic.c | 14 +-
> arch/powerpc/sysdev/xics/xics-common.c | 25 +-
> arch/powerpc/sysdev/xilinx_intc.c | 19 +-
> drivers/gpio/gpio-mpc8xxx.c | 15 +-
> drivers/mfd/twl-core.c | 12 +-
> include/linux/irqdomain.h | 180 ++++--
> kernel/irq/irqdomain.c | 757 ++++++++++++++++++----
> 64 files changed, 1207 insertions(+), 1414 deletions(-)
next prev parent reply other threads:[~2012-01-23 21:53 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-23 21:07 [RFCv2 00/14] Grant Likely
2012-01-23 21:07 ` [RFCv2 01/14] irq_domain: add documentation and MAINTAINERS entry Grant Likely
2012-01-24 19:13 ` Randy Dunlap
2012-01-28 17:05 ` Grant Likely
2012-01-23 21:07 ` [RFCv2 02/14] dt: Make irqdomain less verbose Grant Likely
2012-01-23 21:07 ` [RFCv2 03/14] irq_domain: Make irq_domain structure match powerpc's irq_host Grant Likely
2012-01-24 21:38 ` Rob Herring
2012-01-24 22:08 ` Grant Likely
2012-01-24 22:11 ` Rob Herring
2012-01-23 21:07 ` [RFCv2 04/14] irq_domain: convert microblaze from irq_host to irq_domain Grant Likely
2012-01-23 21:07 ` [RFCv2 05/14] irq_domain/powerpc: Use common irq_domain structure instead of irq_host Grant Likely
2012-01-23 21:07 ` [RFCv2 06/14] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead Grant Likely
2012-01-23 21:07 ` [RFCv2 07/14] irq_domain/powerpc: Eliminate virq_is_host() Grant Likely
2012-01-23 21:07 ` [RFCv2 08/14] irq_domain: Move irq_domain code from powerpc to kernel/irq Grant Likely
2012-01-23 21:07 ` [RFCv2 09/14] irqdomain: remove NO_IRQ from irq domain code Grant Likely
2012-01-23 21:07 ` [RFCv2 10/14] irq_domain: Remove references to old irq_host names Grant Likely
2012-01-23 21:07 ` [RFCv2 11/14] irq_domain: Replace irq_alloc_host() with revmap-specific initializers Grant Likely
2012-01-23 21:07 ` [RFCv2 12/14] irq_domain: Add support for base irq and hwirq in legacy mappings Grant Likely
2012-01-23 21:07 ` [RFCv2 13/14] irq_domain: Remove 'new' irq_domain in favour of the ppc one Grant Likely
2012-01-24 22:10 ` Rob Herring
2012-01-25 0:26 ` Grant Likely
2012-01-23 21:07 ` [RFCv2 14/14] irq_domain: Remove irq_domain_add_simple() Grant Likely
2012-01-23 21:53 ` Rob Herring [this message]
2012-01-25 14:13 ` [RFCv2 00/14] Cousson, Benoit
2012-01-25 18:51 ` Rob Herring
2012-01-26 21:33 ` Grant Likely
2012-01-27 22:08 ` Benjamin Herrenschmidt
2012-01-27 22:13 ` Grant Likely
2012-01-25 22:53 ` Mark Salter
2012-01-26 13:38 ` Grant Likely
2012-01-26 14:26 ` [PATCH] irq_domain/c6x: Convert c6x to use generic irq_domain support Mark Salter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F1DD6DF.4080706@gmail.com \
--to=robherring2@gmail.com \
--cc=b-cousson@ti.com \
--cc=benh@kernel.crashing.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=miltonm@bga.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).