linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Mario.Limonciello@dell.com>
To: <dvhart@infradead.org>, <rostedt@goodmis.org>
Cc: <linux-kernel@vger.kernel.org>,
	<platform-driver-x86@vger.kernel.org>, <andy@infradead.org>,
	<pali.rohar@gmail.com>, <tzanussi@gmail.com>
Subject: RE: [PATCH] platform/x86: dell-smbios-base: Fix use after free on failure of dell_smbios_init()
Date: Thu, 4 Apr 2019 01:31:38 +0000	[thread overview]
Message-ID: <4a66c6e456df43f2b374ce5a72b5f957@ausx13mpc120.AMER.DELL.COM> (raw)
In-Reply-To: <20190403201545.GA39081@wrath>

> -----Original Message-----
> From: Darren Hart <dvhart@infradead.org>
> Sent: Wednesday, April 3, 2019 3:16 PM
> To: Steven Rostedt; Limonciello, Mario
> Cc: LKML; platform-driver-x86@vger.kernel.org; Andy Shevchenko; Pali Rohár; Tom
> Zanussi
> Subject: Re: [PATCH] platform/x86: dell-smbios-base: Fix use after free on failure of
> dell_smbios_init()
> 
> 
> [EXTERNAL EMAIL]
> 
> On Wed, Apr 03, 2019 at 03:20:18PM -0400, Steven Rostedt wrote:
> > From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
> >
> > If da_tokens are allocated, but dell_smbios_init() eventually fails, it will
> > free the da_tokens but it does not reset the da_num_tokens number. This
> > leads to the possibility of a use after free in dell_smbios_find_token().
> > As da_tokens is not NULL and da_num_tokens is set to something other than 0.
> >
> > By reseting the da_num_tokens to zero, and da_tokens to NULL after it is
> > freed, then access into the other functions that reference them will not
> > read freed memory.
> 
> Upon closer inspections this appears to be a race more than an access
> issue.  Even with this patch, there is still the space between kfree()
> and da_num_tokens = 0. This could be addressed by setting da_num_tokens
> to 0 prior to the call to kfree().
> 
> That said, the bigger issue here seems to be the ability to use the
> dell_smbios_find_token() call before the module_init() has completed
> successfully.
> 
> Mario, care to weigh in?
> 

As I can tell as soon as da_num_tokens is set to 0 that function should be safe to call
though even if module_init wasn't finished yet.

> >
> > This was caught by a KASAN report:
> >
> > ==================================================================
> > BUG: KASAN: use-after-free in dell_smbios_find_token+0x2e/0x80 [dell_smbios]
> > Read of size 2 at addr ffff88840c2bc1a8 by task systemd-udevd/479
> >
> > CPU: 0 PID: 479 Comm: systemd-udevd Not tainted 5.1.0-rc1+ #9
> > Hardware name: Dell Inc. XPS 13 9360/02PG84, BIOS 2.3.1 10/03/2017
> > Call Trace:
> >  dump_stack+0x7c/0xbb
> >  ? dell_smbios_find_token+0x2e/0x80 [dell_smbios]
> >  print_address_description+0xc7/0x280
> >  ? dell_smbios_find_token+0x2e/0x80 [dell_smbios]
> >  ? dell_smbios_find_token+0x2e/0x80 [dell_smbios]
> >  kasan_report+0x14e/0x192
> >  ? dell_smbios_find_token+0x2e/0x80 [dell_smbios]
> >  dell_smbios_find_token+0x2e/0x80 [dell_smbios]
> >  kbd_led_init+0x2e7/0x473 [dell_laptop]
> >  ? dmi_matched+0x2a/0x2a [dell_laptop]
> >  ? get_device_parent.isra.28+0x2a0/0x2a0
> >  ? lockdep_init_map+0x98/0x2c0
> >  ? platform_device_add+0x1b5/0x3a0
> >  dell_init+0x4ad/0xb63 [dell_laptop]
> >  ? kbd_led_init+0x473/0x473 [dell_laptop]
> >  ? ___slab_alloc+0x61f/0x700
> >  ? ___slab_alloc+0x61f/0x700
> >  ? preempt_count_sub+0x15/0x100
> >  ? kbd_led_init+0x473/0x473 [dell_laptop]
> >  do_one_initcall+0xbd/0x3fd
> >  ? perf_trace_initcall_level+0x280/0x280
> >  ? kasan_unpoison_shadow+0x30/0x40
> >  ? __kasan_kmalloc.constprop.8+0xa0/0xd0
> >  ? kmem_cache_alloc_trace+0x163/0x390
> >  ? kasan_unpoison_shadow+0x30/0x40
> >  do_init_module+0xe3/0x341
> >  load_module+0x2fc5/0x3ad0
> >  ? layout_and_allocate+0x1170/0x1170
> >  ? vfs_read+0xd4/0x1b0
> >  ? kernel_read+0x74/0xa0
> >  ? kernel_read_file+0x148/0x320
> >  ? seccomp_notify_release+0x110/0x110
> >  ? __do_sys_finit_module+0x192/0x1c0
> >  __do_sys_finit_module+0x192/0x1c0
> >  ? __ia32_sys_init_module+0x40/0x40
> >  ? syscall_trace_enter+0x184/0x5e0
> >  ? mark_held_locks+0x1a/0x90
> >  do_syscall_64+0x72/0x220
> >  entry_SYSCALL_64_after_hwframe+0x49/0xbe
> > RIP: 0033:0x7fcb4f5f5a49
> > Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7
> > 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff
> > 73 01 c3 48 8b 0d 0f b4 2c 00 f7 d8 64 89 01 48
> > RSP: 002b:00007ffc73e340b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
> > RAX: ffffffffffffffda RBX: 00005599992bb850 RCX: 00007fcb4f5f5a49
> > RDX: 0000000000000000 RSI: 00007fcb4f2e11c5 RDI: 0000000000000010
> > RBP: 00007fcb4f2e11c5 R08: 0000000000000000 R09: 00005599992bb850
> > R10: 0000000000000010 R11: 0000000000000246 R12: 0000000000000000
> > R13: 0000559999298f40 R14: 0000000000020000 R15: 00005599992bb850
> >
> > Allocated by task 479:
> >  __kasan_kmalloc.constprop.8+0xa0/0xd0
> >  krealloc+0xa0/0xc0
> >  0xffffffffc0cc0075
> >  dmi_decode_table+0xf6/0x140
> >  dmi_walk+0x46/0x70
> >  0xffffffffc0cc0109
> >  do_one_initcall+0xbd/0x3fd
> >  do_init_module+0xe3/0x341
> >  load_module+0x2fc5/0x3ad0
> >  __do_sys_finit_module+0x192/0x1c0
> >  do_syscall_64+0x72/0x220
> >  entry_SYSCALL_64_after_hwframe+0x49/0xbe
> >
> > Freed by task 479:
> >  __kasan_slab_free+0x111/0x150
> >  kfree+0xf5/0x350
> >  0xffffffffc0cc01d4
> >  do_one_initcall+0xbd/0x3fd
> >  do_init_module+0xe3/0x341
> >  load_module+0x2fc5/0x3ad0
> >  __do_sys_finit_module+0x192/0x1c0
> >  do_syscall_64+0x72/0x220
> >  entry_SYSCALL_64_after_hwframe+0x49/0xbe
> >
> > The buggy address belongs to the object at ffff88840c2bc1a8
> >  which belongs to the cache kmalloc-2k of size 2048
> > The buggy address is located 0 bytes inside of
> >  2048-byte region [ffff88840c2bc1a8, ffff88840c2bc9a8)
> > The buggy address belongs to the page:
> > page:ffffea001030ae00 count:1 mapcount:0 mapping:ffff8884204113c0
> index:0x0
> > compound_mapcount: 0
> > flags: 0x17ffffc0010200(slab|head)
> > raw: 0017ffffc0010200 ffffea0010367608 ffffea000ea31808 ffff8884204113c0
> > raw: 0000000000000000 00000000000d000d 00000001ffffffff
> 0000000000000000
> > page dumped because: kasan: bad access detected
> >
> > Memory state around the buggy address:
> >  ffff88840c2bc080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> >  ffff88840c2bc100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> > >ffff88840c2bc180: fc fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb
> >                                   ^
> >  ffff88840c2bc200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> >  ffff88840c2bc280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > ==================================================================
> >
> > Link: http://lkml.kernel.org/r/1553106560.2080.5.camel@gmail.com
> >
> > Reported-by: Tom Zanussi <tzanussi@gmail.com>
> > Tested-by: Tom Zanussi <tzanussi@gmail.com>
> > Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
> > ---
> >  drivers/platform/x86/dell-smbios-base.c | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/platform/x86/dell-smbios-base.c b/drivers/platform/x86/dell-
> smbios-base.c
> > index 0537d44d45a6..a74c0df25b15 100644
> > --- a/drivers/platform/x86/dell-smbios-base.c
> > +++ b/drivers/platform/x86/dell-smbios-base.c
> > @@ -625,6 +625,8 @@ static int __init dell_smbios_init(void)
> >
> >  fail_platform_driver:
> >  	kfree(da_tokens);
> > +	da_tokens = NULL;
> > +	da_num_tokens = 0;
> >  	return ret;
> >  }
> >
> > --
> > 2.20.1
> >
> >
> 
> --
> Darren Hart
> VMware Open Source Technology Center

      reply	other threads:[~2019-04-04  1:31 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-03 19:20 [PATCH] platform/x86: dell-smbios-base: Fix use after free on failure of dell_smbios_init() Steven Rostedt
2019-04-03 20:15 ` Darren Hart
2019-04-04  1:31   ` Mario.Limonciello [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4a66c6e456df43f2b374ce5a72b5f957@ausx13mpc120.AMER.DELL.COM \
    --to=mario.limonciello@dell.com \
    --cc=andy@infradead.org \
    --cc=dvhart@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=tzanussi@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).