From: Juergen Gross <jgross@suse.com>
To: Oleksandr Andrushchenko <andr2000@gmail.com>,
xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, airlied@linux.ie,
daniel.vetter@intel.com, seanpaul@chromium.org,
gustavo@padovan.org, boris.ostrovsky@oracle.com,
konrad.wilk@oracle.com
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Subject: Re: [PATCH 1/9] drm/xen-front: Introduce Xen para-virtualized frontend driver
Date: Wed, 21 Feb 2018 10:09:49 +0100 [thread overview]
Message-ID: <4b20fcdd-2618-71a8-d94e-37c802973a02@suse.com> (raw)
In-Reply-To: <91386840-c34a-31a4-2bb3-14a27ececa9c@gmail.com>
On 21/02/18 09:47, Oleksandr Andrushchenko wrote:
> On 02/21/2018 10:19 AM, Juergen Gross wrote:
>> On 21/02/18 09:03, Oleksandr Andrushchenko wrote:
>>> From: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
>>>
>>> Introduce skeleton of the para-virtualized Xen display
>>> frontend driver. This patch only adds required
>>> essential stubs.
>>>
>>> Signed-off-by: Oleksandr Andrushchenko
>>> <oleksandr_andrushchenko@epam.com>
>>> ---
>>> drivers/gpu/drm/Kconfig | 2 +
>>> drivers/gpu/drm/Makefile | 1 +
>>> drivers/gpu/drm/xen/Kconfig | 17 ++++++++
>>> drivers/gpu/drm/xen/Makefile | 5 +++
>>> drivers/gpu/drm/xen/xen_drm_front.c | 83
>>> +++++++++++++++++++++++++++++++++++++
>>> 5 files changed, 108 insertions(+)
>>> create mode 100644 drivers/gpu/drm/xen/Kconfig
>>> create mode 100644 drivers/gpu/drm/xen/Makefile
>>> create mode 100644 drivers/gpu/drm/xen/xen_drm_front.c
>>>
>>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
>>> index deeefa7a1773..757825ac60df 100644
>>> --- a/drivers/gpu/drm/Kconfig
>>> +++ b/drivers/gpu/drm/Kconfig
>>> @@ -289,6 +289,8 @@ source "drivers/gpu/drm/pl111/Kconfig"
>>> source "drivers/gpu/drm/tve200/Kconfig"
>>> +source "drivers/gpu/drm/xen/Kconfig"
>>> +
>>> # Keep legacy drivers last
>>> menuconfig DRM_LEGACY
>>> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
>>> index 50093ff4479b..9d66657ea117 100644
>>> --- a/drivers/gpu/drm/Makefile
>>> +++ b/drivers/gpu/drm/Makefile
>>> @@ -103,3 +103,4 @@ obj-$(CONFIG_DRM_MXSFB) += mxsfb/
>>> obj-$(CONFIG_DRM_TINYDRM) += tinydrm/
>>> obj-$(CONFIG_DRM_PL111) += pl111/
>>> obj-$(CONFIG_DRM_TVE200) += tve200/
>>> +obj-$(CONFIG_DRM_XEN) += xen/
>>> diff --git a/drivers/gpu/drm/xen/Kconfig b/drivers/gpu/drm/xen/Kconfig
>>> new file mode 100644
>>> index 000000000000..4cca160782ab
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/xen/Kconfig
>>> @@ -0,0 +1,17 @@
>>> +config DRM_XEN
>>> + bool "DRM Support for Xen guest OS"
>>> + depends on XEN
>>> + help
>>> + Choose this option if you want to enable DRM support
>>> + for Xen.
>>> +
>>> +config DRM_XEN_FRONTEND
>>> + tristate "Para-virtualized frontend driver for Xen guest OS"
>>> + depends on DRM_XEN
>>> + depends on DRM
>>> + select DRM_KMS_HELPER
>>> + select VIDEOMODE_HELPERS
>>> + select XEN_XENBUS_FRONTEND
>>> + help
>>> + Choose this option if you want to enable a para-virtualized
>>> + frontend DRM/KMS driver for Xen guest OSes.
>>> diff --git a/drivers/gpu/drm/xen/Makefile b/drivers/gpu/drm/xen/Makefile
>>> new file mode 100644
>>> index 000000000000..967074d348f6
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/xen/Makefile
>>> @@ -0,0 +1,5 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +
>>> +drm_xen_front-objs := xen_drm_front.o
>>> +
>>> +obj-$(CONFIG_DRM_XEN_FRONTEND) += drm_xen_front.o
>>> diff --git a/drivers/gpu/drm/xen/xen_drm_front.c
>>> b/drivers/gpu/drm/xen/xen_drm_front.c
>>> new file mode 100644
>>> index 000000000000..fd372fb464a1
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/xen/xen_drm_front.c
>>> @@ -0,0 +1,83 @@
>>> +/*
>>> + * Xen para-virtual DRM device
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> modify
>>> + * it under the terms of the GNU General Public License as
>>> published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>> Use SPDX identifier instead (same applies for all other new
>> sources):
>>
>> // SPDX-License-Identifier: GPL-2.0
> Will update, thank you
>>> + *
>>> + * Copyright (C) 2016-2018 EPAM Systems Inc.
>>> + *
>>> + * Author: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
>>> + */
>>> +
>>> +#include <drm/drmP.h>
>>> +
>>> +#include <xen/platform_pci.h>
>>> +#include <xen/xen.h>
>>> +#include <xen/xenbus.h>
>>> +
>>> +#include <xen/interface/io/displif.h>
>>> +
>>> +static void backend_on_changed(struct xenbus_device *xb_dev,
>>> + enum xenbus_state backend_state)
>>> +{
>>> +}
>>> +
>>> +static int xen_drv_probe(struct xenbus_device *xb_dev,
>>> + const struct xenbus_device_id *id)
>>> +{
>>> + return 0;
>>> +}
>>> +
>>> +static int xen_drv_remove(struct xenbus_device *dev)
>>> +{
>>> + return 0;
>>> +}
>>> +
>>> +static const struct xenbus_device_id xen_drv_ids[] = {
>>> + { XENDISPL_DRIVER_NAME },
>>> + { "" }
>>> +};
>>> +
>>> +static struct xenbus_driver xen_driver = {
>>> + .ids = xen_drv_ids,
>>> + .probe = xen_drv_probe,
>>> + .remove = xen_drv_remove,
>>> + .otherend_changed = backend_on_changed,
>>> +};
>>> +
>>> +static int __init xen_drv_init(void)
>>> +{
>>> + if (!xen_domain())
>>> + return -ENODEV;
>>> +
>>> + if (xen_initial_domain()) {
>>> + DRM_ERROR(XENDISPL_DRIVER_NAME " cannot run in initial
>>> domain\n");
>>> + return -ENODEV;
>>> + }
>> Why not? Wouldn't that be possible in case of the backend living in a
>> driver domain?
> It is possible (and in my use-case backend indeed runs in
> a driver domain). I was just not sure if it is really a
> good idea to allow that. If you think this is ok, then
> I'll remove this check
I don't think the driver should decide that. This would be the job of
Xen tools IMO.
Juergen
next prev parent reply other threads:[~2018-02-21 9:09 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-21 8:03 [PATCH 0/9] drm/xen-front: Add support for Xen PV display frontend Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 1/9] drm/xen-front: Introduce Xen para-virtualized frontend driver Oleksandr Andrushchenko
2018-02-21 8:19 ` Juergen Gross
2018-02-21 8:47 ` Oleksandr Andrushchenko
2018-02-21 9:09 ` Juergen Gross [this message]
2018-02-21 9:11 ` Oleksandr Andrushchenko
2018-02-21 9:17 ` [Xen-devel] " Roger Pau Monné
2018-02-21 9:42 ` Oleksandr Andrushchenko
2018-02-21 10:19 ` Roger Pau Monné
2018-02-21 10:25 ` Oleksandr Andrushchenko
2018-02-22 22:23 ` Boris Ostrovsky
2018-02-23 6:37 ` Oleksandr Andrushchenko
2018-02-23 14:39 ` Boris Ostrovsky
2018-02-23 14:51 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 2/9] drm/xen-front: Implement Xen bus state handling Oleksandr Andrushchenko
2018-02-21 8:23 ` Juergen Gross
2018-02-21 8:50 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 3/9] drm/xen-front: Read driver configuration from Xen store Oleksandr Andrushchenko
2018-02-22 23:20 ` Boris Ostrovsky
2018-02-23 6:46 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 4/9] drm/xen-front: Implement Xen event channel handling Oleksandr Andrushchenko
2018-02-22 23:50 ` Boris Ostrovsky
2018-02-23 7:00 ` Oleksandr Andrushchenko
2018-02-23 14:44 ` Boris Ostrovsky
2018-02-23 14:49 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 5/9] drm/xen-front: Implement handling of shared display buffers Oleksandr Andrushchenko
2018-02-23 0:25 ` Boris Ostrovsky
2018-02-23 7:53 ` Oleksandr Andrushchenko
2018-02-23 14:36 ` Boris Ostrovsky
2018-02-23 14:45 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 6/9] drm/xen-front: Introduce DRM/KMS virtual display driver Oleksandr Andrushchenko
2018-02-23 15:12 ` Boris Ostrovsky
2018-02-23 15:19 ` Oleksandr Andrushchenko
2018-03-05 9:13 ` Daniel Vetter
2018-03-05 9:19 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 7/9] drm/xen-front: Implement KMS/connector handling Oleksandr Andrushchenko
2018-03-05 9:23 ` Daniel Vetter
2018-03-05 12:59 ` Oleksandr Andrushchenko
2018-03-06 7:22 ` Daniel Vetter
2018-03-06 7:29 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 8/9] drm/xen-front: Implement GEM operations Oleksandr Andrushchenko
2018-02-23 15:26 ` Boris Ostrovsky
2018-02-23 15:35 ` Oleksandr Andrushchenko
2018-02-26 23:47 ` Boris Ostrovsky
2018-02-27 6:52 ` Oleksandr Andrushchenko
2018-02-28 19:46 ` Boris Ostrovsky
2018-02-28 19:52 ` Oleksandr Andrushchenko
2018-03-05 9:32 ` Daniel Vetter
2018-03-05 13:46 ` Oleksandr Andrushchenko
2018-03-06 7:26 ` Daniel Vetter
2018-03-06 7:43 ` Oleksandr Andrushchenko
2018-02-21 8:03 ` [PATCH 9/9] drm/xen-front: Implement communication with backend Oleksandr Andrushchenko
2018-03-05 9:25 ` Daniel Vetter
2018-03-05 9:30 ` Oleksandr Andrushchenko
2018-03-06 9:26 ` Daniel Vetter
2018-03-06 9:45 ` Oleksandr Andrushchenko
2018-02-26 8:21 ` [PATCH 0/9] drm/xen-front: Add support for Xen PV display frontend Oleksandr Andrushchenko
2018-02-27 12:40 ` Oleksandr Andrushchenko
2018-02-28 14:08 ` [Xen-devel] " Julien Grall
2018-03-01 1:42 ` Stefano Stabellini
2018-03-01 8:26 ` Gerd Hoffmann
2018-03-01 8:49 ` Oleksandr Andrushchenko
2018-03-01 1:14 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4b20fcdd-2618-71a8-d94e-37c802973a02@suse.com \
--to=jgross@suse.com \
--cc=airlied@linux.ie \
--cc=andr2000@gmail.com \
--cc=boris.ostrovsky@oracle.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gustavo@padovan.org \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oleksandr_andrushchenko@epam.com \
--cc=seanpaul@chromium.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).