From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
<linux-snps-arc@lists.infradead.org>
Cc: <linux-kernel@vger.kernel.org>,
Vineet Gupta <Vineet.Gupta1@synopsys.com>
Subject: Re: [PATCH] arc: nsim: clean-up defconfigs
Date: Tue, 20 Dec 2016 15:23:51 -0800 [thread overview]
Message-ID: <4b5b64b1-3418-f4e0-66a0-958427e02531@synopsys.com> (raw)
In-Reply-To: <1481825556-17182-1-git-send-email-abrodkin@synopsys.com>
On 12/15/2016 10:12 AM, Alexey Brodkin wrote:
> Stand-alone nSIM platform has the only peripheral which is serial port.
> That means support of networking and mice makes no sense for it.
>
> Moreover removal of networking alone gives us 2 nice benefits:
> 1. Build happens faster
> On my machine I'm seeing this:
> Existing defconfig:
> real 2m37.887s
> user 8m22.077s
> sys 0m35.995s
>
> New defconfig:
> real 1m35.351s
> user 5m11.988s
> sys 0m25.211s
>
> Which gives us ~60% speed-up.
>
> 2. Memory footprint is smaller:
> arc-linux-size vmlinux.org
> text data bss dec hex filename
> 5829381 798756 257280 6885417 691029 vmlinux.org
>
> arc-linux-size vmlinux.new
> text data bss dec hex filename
> 4426769 526348 225244 5178361 4f03f9 vmlinux.new
>
> Though this has one down-side - UNIX sockets are disabled an so on
> attempt to run hackbench by default user will see:
> --------------------->8-------------------
> hackbench
> Running in process mode with 10 groups using 40 file descriptors each
> (== 400 tasks)
> Each sender will pass 100 messages of 100 bytes
> Creating fdpair (error: Function not implemented)
> --------------------->8-------------------
>
> Still it's possible to ask hackbench to use pipes instead like this:
> --------------------->8-------------------
> hackbench -p
> Running in process mode with 10 groups using 40 file descriptors each
> (== 400 tasks)
> Each sender will pass 100 messages of 100 bytes
> Time: 9.216
> --------------------->8-------------------
Sorry this part is a no go !
-Vineet
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> ---
> arch/arc/configs/nsim_700_defconfig | 16 +---------------
> arch/arc/configs/nsim_hs_defconfig | 13 +------------
> arch/arc/configs/nsim_hs_smp_defconfig | 12 +-----------
> 3 files changed, 3 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
> index b0066a749d4c..80bd8faecb95 100644
> --- a/arch/arc/configs/nsim_700_defconfig
> +++ b/arch/arc/configs/nsim_700_defconfig
> @@ -2,7 +2,6 @@
> CONFIG_DEFAULT_HOSTNAME="ARCLinux"
> # CONFIG_SWAP is not set
> CONFIG_SYSVIPC=y
> -CONFIG_POSIX_MQUEUE=y
> # CONFIG_CROSS_MEMORY_ATTACH is not set
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_IKCONFIG=y
> @@ -27,22 +26,12 @@ CONFIG_ARC_PLAT_SIM=y
> CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
> CONFIG_PREEMPT=y
> # CONFIG_COMPACTION is not set
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_UNIX_DIAG=y
> -CONFIG_NET_KEY=y
> -CONFIG_INET=y
> -# CONFIG_IPV6 is not set
> CONFIG_DEVTMPFS=y
> # CONFIG_STANDALONE is not set
> # CONFIG_PREVENT_FIRMWARE_BUILD is not set
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> # CONFIG_BLK_DEV is not set
> -CONFIG_NETDEVICES=y
> -CONFIG_ARC_EMAC=y
> -CONFIG_LXT_PHY=y
> -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> +# CONFIG_INPUT_MOUSEDEV is not set
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_SERIO is not set
> @@ -55,11 +44,8 @@ CONFIG_SERIAL_ARC_CONSOLE=y
> # CONFIG_HID is not set
> # CONFIG_USB_SUPPORT is not set
> # CONFIG_IOMMU_SUPPORT is not set
> -CONFIG_EXT2_FS=y
> -CONFIG_EXT2_FS_XATTR=y
> CONFIG_TMPFS=y
> # CONFIG_MISC_FILESYSTEMS is not set
> -CONFIG_NFS_FS=y
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> # CONFIG_ENABLE_MUST_CHECK is not set
> # CONFIG_DEBUG_PREEMPT is not set
> diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig
> index ebe9ebb92933..ad8e7e53ab26 100644
> --- a/arch/arc/configs/nsim_hs_defconfig
> +++ b/arch/arc/configs/nsim_hs_defconfig
> @@ -2,7 +2,6 @@
> CONFIG_DEFAULT_HOSTNAME="ARCLinux"
> # CONFIG_SWAP is not set
> CONFIG_SYSVIPC=y
> -CONFIG_POSIX_MQUEUE=y
> # CONFIG_CROSS_MEMORY_ATTACH is not set
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_IKCONFIG=y
> @@ -31,19 +30,12 @@ CONFIG_ISA_ARCV2=y
> CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
> CONFIG_PREEMPT=y
> # CONFIG_COMPACTION is not set
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_UNIX_DIAG=y
> -CONFIG_NET_KEY=y
> -CONFIG_INET=y
> -# CONFIG_IPV6 is not set
> CONFIG_DEVTMPFS=y
> # CONFIG_STANDALONE is not set
> # CONFIG_PREVENT_FIRMWARE_BUILD is not set
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> # CONFIG_BLK_DEV is not set
> -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> +# CONFIG_INPUT_MOUSEDEV is not set
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_SERIO is not set
> @@ -56,11 +48,8 @@ CONFIG_SERIAL_ARC_CONSOLE=y
> # CONFIG_HID is not set
> # CONFIG_USB_SUPPORT is not set
> # CONFIG_IOMMU_SUPPORT is not set
> -CONFIG_EXT2_FS=y
> -CONFIG_EXT2_FS_XATTR=y
> CONFIG_TMPFS=y
> # CONFIG_MISC_FILESYSTEMS is not set
> -CONFIG_NFS_FS=y
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> # CONFIG_ENABLE_MUST_CHECK is not set
> # CONFIG_DEBUG_PREEMPT is not set
> diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig
> index 4bde43278be6..d0e609e26bfb 100644
> --- a/arch/arc/configs/nsim_hs_smp_defconfig
> +++ b/arch/arc/configs/nsim_hs_smp_defconfig
> @@ -30,19 +30,12 @@ CONFIG_SMP=y
> CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
> CONFIG_PREEMPT=y
> # CONFIG_COMPACTION is not set
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_UNIX_DIAG=y
> -CONFIG_NET_KEY=y
> -CONFIG_INET=y
> -# CONFIG_IPV6 is not set
> CONFIG_DEVTMPFS=y
> # CONFIG_STANDALONE is not set
> # CONFIG_PREVENT_FIRMWARE_BUILD is not set
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> # CONFIG_BLK_DEV is not set
> -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> +# CONFIG_INPUT_MOUSEDEV is not set
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_SERIO is not set
> @@ -55,10 +48,7 @@ CONFIG_SERIAL_ARC_CONSOLE=y
> # CONFIG_HID is not set
> # CONFIG_USB_SUPPORT is not set
> # CONFIG_IOMMU_SUPPORT is not set
> -CONFIG_EXT2_FS=y
> -CONFIG_EXT2_FS_XATTR=y
> CONFIG_TMPFS=y
> # CONFIG_MISC_FILESYSTEMS is not set
> -CONFIG_NFS_FS=y
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> # CONFIG_ENABLE_MUST_CHECK is not set
>
prev parent reply other threads:[~2016-12-20 23:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-15 18:12 [PATCH] arc: nsim: clean-up defconfigs Alexey Brodkin
2016-12-20 23:23 ` Vineet Gupta [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4b5b64b1-3418-f4e0-66a0-958427e02531@synopsys.com \
--to=vineet.gupta1@synopsys.com \
--cc=Alexey.Brodkin@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).