linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tsuchiya Yuto <kitakar@gmail.com>
To: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Amitkumar Karwar <amitkarwar@gmail.com>,
	Ganapathi Bhat <ganapathi.bhat@nxp.com>,
	Xinming Hu <huxinming820@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Maximilian Luz <luzmaximilian@gmail.com>,
	verdre@v0yd.nl
Subject: Re: [RFC PATCH 1/3] mwifiex: pcie: add DMI-based quirk impl for Surface devices
Date: Mon, 02 Nov 2020 19:31:15 +0900	[thread overview]
Message-ID: <4bb9ba8208e23d6b30ec9282556f2c8d764763e2.camel@gmail.com> (raw)
In-Reply-To: <20201028152710.GU4077@smile.fi.intel.com>

On Wed, 2020-10-28 at 17:27 +0200, Andy Shevchenko wrote:
> On Wed, Oct 28, 2020 at 11:27:51PM +0900, Tsuchiya Yuto wrote:
>> This commit adds quirk implementation based on DMI matching with DMI
>> table for Microsoft Surface devices that uses mwifiex chip (currently,
>> all the devices that use mwifiex equip PCIe-88W8897 chip).
>>
>> This implementation can be used for quirks later.
>
> I guess you might need to resend this (and possible other PCI pm related)
> patches to linux-pci@ and Bjorn in Cc.
>
> They may advise possible other (better) solutions.

Thanks for the advice! I also feel it's better. And if I resend this to
the linux-pci mailing list, I feel that I should try to use
drivers/pci/quirks.c instead if possible. But if I do so with this quirk
implementation, it might be possible that it'll be too big change.

So, I'll just resend this series (with changes so that it can be used
for powr_save quirk as well like I said in the reply to another series)
to the linux-pci mailing list and Bjorn (and linux-wireless mailing list
as well) and see what they think.

>> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
>> ---
>>  drivers/net/wireless/marvell/mwifiex/Makefile |   1 +
>>  drivers/net/wireless/marvell/mwifiex/pcie.c   |   4 +
>>  drivers/net/wireless/marvell/mwifiex/pcie.h   |   2 +
>>  .../wireless/marvell/mwifiex/pcie_quirks.c    | 114 ++++++++++++++++++
>>  .../wireless/marvell/mwifiex/pcie_quirks.h    |  11 ++
>>  5 files changed, 132 insertions(+)
>>  create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
>>  create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
>>
>> diff --git a/drivers/net/wireless/marvell/mwifiex/Makefile b/drivers/net/wireless/marvell/mwifiex/Makefile
>> index fdfd9bf15ed46..8a1e7c5b9c6e2 100644
>> --- a/drivers/net/wireless/marvell/mwifiex/Makefile
>> +++ b/drivers/net/wireless/marvell/mwifiex/Makefile
>> @@ -49,6 +49,7 @@ mwifiex_sdio-y += sdio.o
>>  obj-$(CONFIG_MWIFIEX_SDIO) += mwifiex_sdio.o
>>  
>>  mwifiex_pcie-y += pcie.o
>> +mwifiex_pcie-y += pcie_quirks.o
>>  obj-$(CONFIG_MWIFIEX_PCIE) += mwifiex_pcie.o
>>  
>>  mwifiex_usb-y += usb.o
>> diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
>> index 6a10ff0377a24..362cf10debfa0 100644
>> --- a/drivers/net/wireless/marvell/mwifiex/pcie.c
>> +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
>> @@ -27,6 +27,7 @@
>>  #include "wmm.h"
>>  #include "11n.h"
>>  #include "pcie.h"
>> +#include "pcie_quirks.h"
>>  
>>  #define PCIE_VERSION	"1.0"
>>  #define DRV_NAME        "Marvell mwifiex PCIe"
>> @@ -410,6 +411,9 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
>>  			return ret;
>>  	}
>>  
>> +	/* check quirks */
>> +	mwifiex_initialize_quirks(card);
>> +
>>  	if (mwifiex_add_card(card, &card->fw_done, &pcie_ops,
>>  			     MWIFIEX_PCIE, &pdev->dev)) {
>>  		pr_err("%s failed\n", __func__);
>> diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h
>> index 843d57eda8201..09839a3bd1753 100644
>> --- a/drivers/net/wireless/marvell/mwifiex/pcie.h
>> +++ b/drivers/net/wireless/marvell/mwifiex/pcie.h
>> @@ -242,6 +242,8 @@ struct pcie_service_card {
>>  	struct mwifiex_msix_context share_irq_ctx;
>>  	struct work_struct work;
>>  	unsigned long work_flags;
>> +
>> +	unsigned long quirks;
>>  };
>>  
>>  static inline int
>> diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
>> new file mode 100644
>> index 0000000000000..929aee2b0a60a
>> --- /dev/null
>> +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
>> @@ -0,0 +1,114 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * File for PCIe quirks.
>> + */
>> +
>> +/* The low-level PCI operations will be performed in this file. Therefore,
>> + * let's use dev_*() instead of mwifiex_dbg() here to avoid troubles (e.g.
>> + * to avoid using mwifiex_adapter struct before init or wifi is powered
>> + * down, or causes NULL ptr deref).
>> + */
>> +
>> +#include <linux/dmi.h>
>> +
>> +#include "pcie_quirks.h"
>> +
>> +/* quirk table based on DMI matching */
>> +static const struct dmi_system_id mwifiex_quirk_table[] = {
>> +	{
>> +		.ident = "Surface Pro 4",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Pro 5",
>> +		.matches = {
>> +			/* match for SKU here due to generic product name "Surface Pro" */
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Pro 5 (LTE)",
>> +		.matches = {
>> +			/* match for SKU here due to generic product name "Surface Pro" */
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Pro 6",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Book 1",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Book 2",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Laptop 1",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Laptop 2",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface 3",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{
>> +		.ident = "Surface Pro 3",
>> +		.matches = {
>> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
>> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 3"),
>> +		},
>> +		.driver_data = 0,
>> +	},
>> +	{}
>> +};
>> +
>> +void mwifiex_initialize_quirks(struct pcie_service_card *card)
>> +{
>> +	struct pci_dev *pdev = card->dev;
>> +	const struct dmi_system_id *dmi_id;
>> +
>> +	dmi_id = dmi_first_match(mwifiex_quirk_table);
>> +	if (dmi_id)
>> +		card->quirks = (uintptr_t)dmi_id->driver_data;
>> +
>> +	if (!card->quirks)
>> +		dev_info(&pdev->dev, "no quirks enabled\n");
>> +}
>> diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
>> new file mode 100644
>> index 0000000000000..5326ae7e56713
>> --- /dev/null
>> +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
>> @@ -0,0 +1,11 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Header file for PCIe quirks.
>> + */
>> +
>> +#include "pcie.h"
>> +
>> +/* quirks */
>> +// quirk flags can be added here
>> +
>> +void mwifiex_initialize_quirks(struct pcie_service_card *card);
>> -- 
>> 2.29.1
>>
>



  parent reply	other threads:[~2020-11-02 10:31 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-28 14:27 [RFC PATCH 0/3] mwifiex: add fw reset quirks for Microsoft Surface Tsuchiya Yuto
2020-10-28 14:27 ` [RFC PATCH 1/3] mwifiex: pcie: add DMI-based quirk impl for Surface devices Tsuchiya Yuto
     [not found]   ` <20201028152710.GU4077@smile.fi.intel.com>
2020-11-02 10:31     ` Tsuchiya Yuto [this message]
2020-10-28 14:27 ` [RFC PATCH 2/3] mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devices Tsuchiya Yuto
2020-10-28 14:27 ` [RFC PATCH 3/3] mwifiex: pcie: add reset_wsid quirk for Surface 3 Tsuchiya Yuto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4bb9ba8208e23d6b30ec9282556f2c8d764763e2.camel@gmail.com \
    --to=kitakar@gmail.com \
    --cc=amitkarwar@gmail.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=davem@davemloft.net \
    --cc=ganapathi.bhat@nxp.com \
    --cc=huxinming820@gmail.com \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luzmaximilian@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=verdre@v0yd.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).