linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
	linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v3 069/105] drm/vc4: hdmi: Move structure to header
Date: Wed, 27 May 2020 17:48:39 +0200	[thread overview]
Message-ID: <4c4da3823e4d1a8189e96a59a79451fff372f70b.1590594512.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.aaf2100bd7da4609f8bcb8216247d4b4e4379639.1590594512.git-series.maxime@cerno.tech>

We will need to share the vc4_hdmi and related structures with multiple
files, so let's create a header for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 76 +-------------------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h | 86 +++++++++++++++++++++++++++++++++++-
 2 files changed, 87 insertions(+), 75 deletions(-)
 create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 38fe942a327b..41573fca5a40 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -49,87 +49,13 @@
 #include <sound/soc.h>
 #include "media/cec.h"
 #include "vc4_drv.h"
+#include "vc4_hdmi.h"
 #include "vc4_regs.h"
 
 #define HSM_CLOCK_FREQ 163682864
 #define CEC_CLOCK_FREQ 40000
 #define CEC_CLOCK_DIV  (HSM_CLOCK_FREQ / CEC_CLOCK_FREQ)
 
-/* HDMI audio information */
-struct vc4_hdmi_audio {
-	struct snd_soc_card card;
-	struct snd_soc_dai_link link;
-	struct snd_soc_dai_link_component cpu;
-	struct snd_soc_dai_link_component codec;
-	struct snd_soc_dai_link_component platform;
-	int samplerate;
-	int channels;
-	struct snd_dmaengine_dai_dma_data dma_data;
-	struct snd_pcm_substream *substream;
-};
-
-/* General HDMI hardware state. */
-struct vc4_hdmi {
-	struct platform_device *pdev;
-
-	struct drm_encoder *encoder;
-	struct drm_connector *connector;
-
-	struct vc4_hdmi_audio audio;
-
-	struct i2c_adapter *ddc;
-	void __iomem *hdmicore_regs;
-	void __iomem *hd_regs;
-	int hpd_gpio;
-	bool hpd_active_low;
-
-	struct cec_adapter *cec_adap;
-	struct cec_msg cec_rx_msg;
-	bool cec_tx_ok;
-	bool cec_irq_was_rx;
-
-	struct clk *pixel_clock;
-	struct clk *hsm_clock;
-
-	struct debugfs_regset32 hdmi_regset;
-	struct debugfs_regset32 hd_regset;
-};
-
-#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
-#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
-#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
-#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
-
-/* VC4 HDMI encoder KMS struct */
-struct vc4_hdmi_encoder {
-	struct vc4_encoder base;
-	bool hdmi_monitor;
-	bool limited_rgb_range;
-};
-
-static inline struct vc4_hdmi_encoder *
-to_vc4_hdmi_encoder(struct drm_encoder *encoder)
-{
-	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
-}
-
-/* VC4 HDMI connector KMS struct */
-struct vc4_hdmi_connector {
-	struct drm_connector base;
-
-	/* Since the connector is attached to just the one encoder,
-	 * this is the reference to it so we can do the best_encoder()
-	 * hook.
-	 */
-	struct drm_encoder *encoder;
-};
-
-static inline struct vc4_hdmi_connector *
-to_vc4_hdmi_connector(struct drm_connector *connector)
-{
-	return container_of(connector, struct vc4_hdmi_connector, base);
-}
-
 static const struct debugfs_reg32 hdmi_regs[] = {
 	VC4_REG32(VC4_HDMI_CORE_REV),
 	VC4_REG32(VC4_HDMI_SW_RESET_CONTROL),
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
new file mode 100644
index 000000000000..5ec5d1f6b1e6
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -0,0 +1,86 @@
+#ifndef _VC4_HDMI_H_
+#define _VC4_HDMI_H_
+
+#include <drm/drm_connector.h>
+#include <media/cec.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/soc.h>
+
+#include "vc4_drv.h"
+
+/* HDMI audio information */
+struct vc4_hdmi_audio {
+	struct snd_soc_card card;
+	struct snd_soc_dai_link link;
+	struct snd_soc_dai_link_component cpu;
+	struct snd_soc_dai_link_component codec;
+	struct snd_soc_dai_link_component platform;
+	int samplerate;
+	int channels;
+	struct snd_dmaengine_dai_dma_data dma_data;
+	struct snd_pcm_substream *substream;
+};
+
+/* General HDMI hardware state. */
+struct vc4_hdmi {
+	struct platform_device *pdev;
+
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+
+	struct vc4_hdmi_audio audio;
+
+	struct i2c_adapter *ddc;
+	void __iomem *hdmicore_regs;
+	void __iomem *hd_regs;
+	int hpd_gpio;
+	bool hpd_active_low;
+
+	struct cec_adapter *cec_adap;
+	struct cec_msg cec_rx_msg;
+	bool cec_tx_ok;
+	bool cec_irq_was_rx;
+
+	struct clk *pixel_clock;
+	struct clk *hsm_clock;
+
+	struct debugfs_regset32 hdmi_regset;
+	struct debugfs_regset32 hd_regset;
+};
+
+#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
+#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
+#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
+#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
+
+/* VC4 HDMI encoder KMS struct */
+struct vc4_hdmi_encoder {
+	struct vc4_encoder base;
+	bool hdmi_monitor;
+	bool limited_rgb_range;
+};
+
+static inline struct vc4_hdmi_encoder *
+to_vc4_hdmi_encoder(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
+}
+
+/* VC4 HDMI connector KMS struct */
+struct vc4_hdmi_connector {
+	struct drm_connector base;
+
+	/* Since the connector is attached to just the one encoder,
+	 * this is the reference to it so we can do the best_encoder()
+	 * hook.
+	 */
+	struct drm_encoder *encoder;
+};
+
+static inline struct vc4_hdmi_connector *
+to_vc4_hdmi_connector(struct drm_connector *connector)
+{
+	return container_of(connector, struct vc4_hdmi_connector, base);
+}
+
+#endif /* _VC4_HDMI_H_ */
-- 
git-series 0.9.1

  parent reply	other threads:[~2020-05-27 15:55 UTC|newest]

Thread overview: 151+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-27 15:47 [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 001/105] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 002/105] reset: simple: Add reset callback Maxime Ripard
2020-05-27 16:03   ` Philipp Zabel
2020-05-27 15:47 ` [PATCH v3 003/105] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 004/105] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-06-04 17:26   ` Nicolas Saenz Julienne
2020-06-05 17:43     ` Maxime Ripard
2020-06-05 18:11       ` Nicolas Saenz Julienne
2020-06-05 17:56   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 005/105] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 006/105] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-05-27 19:12   ` Rob Herring
2020-06-02 15:00     ` Maxime Ripard
2020-06-17 20:21   ` Rob Herring
2020-05-27 15:47 ` [PATCH v3 007/105] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 008/105] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 009/105] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 010/105] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 011/105] drm/vc4: drv: Add include guards Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 012/105] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-05-27 16:27   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 013/105] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 014/105] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 015/105] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-05-27 16:33   ` Eric Anholt
2020-06-02 12:52     ` Maxime Ripard
2020-06-02 17:52       ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 016/105] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-05-27 16:44   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 017/105] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 018/105] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 019/105] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 020/105] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-05-27 16:52   ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 021/105] drm/vc4: plane: Create more planes Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 022/105] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 023/105] drm/vc4: crtc: Switch to of_device_get_match_data Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 024/105] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 025/105] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 026/105] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 027/105] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 028/105] drm/vc4: crtc: Restrict HACT_ACT setup to DSI Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 029/105] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 030/105] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 031/105] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 032/105] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-05-27 16:54   ` Eric Anholt
2020-06-02 14:12     ` Maxime Ripard
2020-06-02 15:02       ` Dave Stevenson
2020-06-02 19:31         ` Eric Anholt
2020-06-02 20:03           ` Stefan Wahren
2020-06-03 13:14             ` Maxime Ripard
2020-06-03 15:26               ` Stefan Wahren
2020-06-12 15:35           ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 033/105] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-05-27 17:23   ` Eric Anholt
2020-06-16 15:04     ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 034/105] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 035/105] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 036/105] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 037/105] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 038/105] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 039/105] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 040/105] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-05-27 17:30   ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 041/105] drm/vc4: crtc: Move HVS mode config to HVS file Maxime Ripard
2020-05-27 18:26   ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 042/105] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 043/105] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 044/105] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 045/105] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 046/105] drm/vc4: hvs: Remove mode_set_nofb Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 047/105] drm/vc4: crtc: " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 048/105] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 049/105] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 050/105] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 051/105] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 052/105] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 053/105] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 054/105] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 055/105] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-05-27 19:40   ` Eric Anholt
2020-06-03  9:43     ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 056/105] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 057/105] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 058/105] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 059/105] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-05-27 19:24   ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 060/105] drm/vc4: crtc: Make state functions public Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 061/105] drm/vc4: crtc: Split CRTC data in two Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 062/105] drm/vc4: crtc: Only access the PixelValve registers if we have to Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 063/105] drm/vc4: crtc: Move the CRTC initialisation to a separate function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 064/105] drm/vc4: crtc: Change the HVS5 test for of_device_is_compatible Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 065/105] drm/vc4: crtc: Move the txp_armed function to the TXP Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 066/105] drm/vc4: txp: Turn the TXP into a CRTC of its own Maxime Ripard
2020-05-28 15:51   ` Emil Velikov
2020-06-10 18:40     ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 067/105] drm/vc4: crtc: Remove the feed_txp tests Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 068/105] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-05-27 15:48 ` Maxime Ripard [this message]
2020-05-27 15:48 ` [PATCH v3 070/105] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-05-27 18:41   ` Eric Anholt
2020-06-02 15:54     ` Maxime Ripard
2020-06-03 17:32       ` Stefan Wahren
2020-06-05 14:35         ` Maxime Ripard
2020-06-06  8:06           ` Stefan Wahren
2020-06-11 13:34             ` Maxime Ripard
2020-06-14 16:16               ` Stefan Wahren
2020-06-16 12:30                 ` Maxime Ripard
2020-06-16 19:09                   ` Stefan Wahren
2020-05-27 15:48 ` [PATCH v3 071/105] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 072/105] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 073/105] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 074/105] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 075/105] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 076/105] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 077/105] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 078/105] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 079/105] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 080/105] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 081/105] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 082/105] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 083/105] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 084/105] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 085/105] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 086/105] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 087/105] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 088/105] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 089/105] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 090/105] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 091/105] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 092/105] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 093/105] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 094/105] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 095/105] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 096/105] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 097/105] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 098/105] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 099/105] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 100/105] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 101/105] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 102/105] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 103/105] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 104/105] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-29 18:18   ` Rob Herring
2020-06-02 15:08     ` Maxime Ripard
2020-06-08 23:01       ` Rob Herring
2020-05-27 15:49 ` [PATCH v3 105/105] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-06-03 20:11   ` Stefan Wahren
2020-06-02 20:12 ` [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4c4da3823e4d1a8189e96a59a79451fff372f70b.1590594512.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).