linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Youn <johnyoun@synopsys.com>
To: John Youn <johnyoun@synopsys.com>
To: Felipe Balbi <balbi@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-usb@vger.kernel.org
To: linux-kernel@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Remi Pommarel <repk@triplefau.lt>
Cc: Caesar Wang <caesar.upstream@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tao Huang <huangtao@rock-chips.com>
Cc: Michael Niewoehner <linux@mniewoehner.de>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Subject: [PATCH v5 2/3] usb: dwc2: Add delay to core soft reset
Date: Wed, 07 Sep 2016 19:39:40 -0700	[thread overview]
Message-ID: <4cfa6baf14f5d892864d07c76c728e9d40f1456f.1473302184.git.johnyoun@synopsys.com> (raw)
In-Reply-To: <cover.1473302184.git.johnyoun@synopsys.com>

Add a delay to the core soft reset function to account for the IDDIG
debounce filter.

If the current mode is host, either due to the force mode bit being
set (which persists after core reset) or the connector id pin, a core
soft reset will temporarily reset the mode to device and a delay from
the IDDIG debounce filter will occur before going back to host mode.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
---
 drivers/usb/dwc2/core.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/dwc2/core.h |  1 +
 drivers/usb/dwc2/hw.h   |  1 +
 3 files changed, 97 insertions(+)

diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 4135a5f..a3068e0 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -238,6 +238,77 @@ int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg)
 	return ret;
 }
 
+/**
+ * dwc2_wait_for_mode() - Waits for the controller mode.
+ * @hsotg:	Programming view of the DWC_otg controller.
+ * @host_mode:	If true, waits for host mode, otherwise device mode.
+ */
+static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
+			       bool host_mode)
+{
+	ktime_t start;
+	ktime_t end;
+	unsigned int timeout = 110;
+
+	dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
+		 host_mode ? "host" : "device");
+
+	start = ktime_get();
+
+	while (1) {
+		s64 ms;
+
+		if (dwc2_is_host_mode(hsotg) == host_mode) {
+			dev_vdbg(hsotg->dev, "%s mode set\n",
+				 host_mode ? "Host" : "Device");
+			break;
+		}
+
+		end = ktime_get();
+		ms = ktime_to_ms(ktime_sub(end, start));
+
+		if (ms >= (s64)timeout) {
+			dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
+				 __func__, host_mode ? "host" : "device");
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	}
+}
+
+/**
+ * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
+ * filter is enabled.
+ */
+static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
+{
+	u32 gsnpsid;
+	u32 ghwcfg4;
+
+	if (!dwc2_hw_is_otg(hsotg))
+		return false;
+
+	/* Check if core configuration includes the IDDIG filter. */
+	ghwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4);
+	if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
+		return false;
+
+	/*
+	 * Check if the IDDIG debounce filter is bypassed. Available
+	 * in core version >= 3.10a.
+	 */
+	gsnpsid = dwc2_readl(hsotg->regs + GSNPSID);
+	if (gsnpsid >= DWC2_CORE_REV_3_10a) {
+		u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+
+		if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
+			return false;
+	}
+
+	return true;
+}
+
 /*
  * Do core a soft reset of the core.  Be careful with this because it
  * resets all the internal state machines of the core.
@@ -246,9 +317,30 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg)
 {
 	u32 greset;
 	int count = 0;
+	bool wait_for_host_mode = false;
 
 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 
+	/*
+	 * If the current mode is host, either due to the force mode
+	 * bit being set (which persists after core reset) or the
+	 * connector id pin, a core soft reset will temporarily reset
+	 * the mode to device. A delay from the IDDIG debounce filter
+	 * will occur before going back to host mode.
+	 *
+	 * Determine whether we will go back into host mode after a
+	 * reset and account for this delay after the reset.
+	 */
+	if (dwc2_iddig_filter_enabled(hsotg)) {
+		u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+		u32 gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+
+		if (!(gotgctl & GOTGCTL_CONID_B) ||
+		    (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
+			wait_for_host_mode = true;
+		}
+	}
+
 	/* Core Soft Reset */
 	greset = dwc2_readl(hsotg->regs + GRSTCTL);
 	greset |= GRSTCTL_CSFTRST;
@@ -277,6 +369,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg)
 		}
 	} while (!(greset & GRSTCTL_AHBIDLE));
 
+	if (wait_for_host_mode)
+		dwc2_wait_for_mode(hsotg, true);
+
 	return 0;
 }
 
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 78526ee..466c220 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -882,6 +882,7 @@ struct dwc2_hsotg {
 #define DWC2_CORE_REV_2_92a	0x4f54292a
 #define DWC2_CORE_REV_2_94a	0x4f54294a
 #define DWC2_CORE_REV_3_00a	0x4f54300a
+#define DWC2_CORE_REV_3_10a	0x4f54310a
 
 #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
 	union dwc2_hcd_internal_flags {
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index efc3bcd..9105844 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -48,6 +48,7 @@
 #define GOTGCTL_ASESVLD			(1 << 18)
 #define GOTGCTL_DBNC_SHORT		(1 << 17)
 #define GOTGCTL_CONID_B			(1 << 16)
+#define GOTGCTL_DBNCE_FLTR_BYPASS	(1 << 15)
 #define GOTGCTL_DEVHNPEN		(1 << 11)
 #define GOTGCTL_HSTSETHNPEN		(1 << 10)
 #define GOTGCTL_HNPREQ			(1 << 9)
-- 
2.9.0

  parent reply	other threads:[~2016-09-08  2:40 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-08  2:39 [PATCH v5 0/3] usb: dwc2: Fix core reset and force mode delays John Youn
2016-09-08  2:39 ` [PATCH v5 1/3] usb: dwc2: gadget: Only initialize device if in device mode John Youn
2016-09-08  2:39 ` John Youn [this message]
2016-09-08  2:39 ` [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays John Youn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4cfa6baf14f5d892864d07c76c728e9d40f1456f.1473302184.git.johnyoun@synopsys.com \
    --to=johnyoun@synopsys.com \
    --cc=linux-rpi-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).