Re: [PATCH v2 04/18] MIPS: dts: Add initial support for Intel MIPS SoCs

[Hauke Mehrtens <hauke@hauke-m.de>]

[-- Attachment #1.1: Type: text/plain, Size: 5166 bytes --]

On 08/03/2018 05:02 AM, Songjun Wu wrote:
> From: Hua Ma <hua.ma@linux.intel.com>
> 
> Add dts files to support Intel MIPS SoCs:
> - xrx500.dtsi is the chip dts
> - easy350_anywan.dts is the board dts
> 
> Signed-off-by: Hua Ma <hua.ma@linux.intel.com>
> Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
> ---
> 
> Changes in v2:
> - New patch split from previous patch
> - The memory address is changed to @20000000
> - Update to obj-$(CONFIG_BUILTIN_DTB) as per commit fca3aa166422
> 
>  arch/mips/boot/dts/Makefile                      |  1 +
>  arch/mips/boot/dts/intel-mips/Makefile           |  4 ++
>  arch/mips/boot/dts/intel-mips/easy350_anywan.dts | 26 ++++++++++
>  arch/mips/boot/dts/intel-mips/xrx500.dtsi        | 66 ++++++++++++++++++++++++
>  4 files changed, 97 insertions(+)
>  create mode 100644 arch/mips/boot/dts/intel-mips/Makefile
>  create mode 100644 arch/mips/boot/dts/intel-mips/easy350_anywan.dts
>  create mode 100644 arch/mips/boot/dts/intel-mips/xrx500.dtsi
> 
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 1e79cab8e269..05f52f279047 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -3,6 +3,7 @@ subdir-y	+= brcm
>  subdir-y	+= cavium-octeon
>  subdir-y	+= img
>  subdir-y	+= ingenic
> +subdir-y	+= intel-mips
>  subdir-y	+= lantiq
>  subdir-y	+= mscc
>  subdir-y	+= mti
> diff --git a/arch/mips/boot/dts/intel-mips/Makefile b/arch/mips/boot/dts/intel-mips/Makefile
> new file mode 100644
> index 000000000000..adfaabbbb07c
> --- /dev/null
> +++ b/arch/mips/boot/dts/intel-mips/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_DTB_INTEL_MIPS_GRX500)	+= easy350_anywan.dtb
> +
> +obj-$(CONFIG_BUILTIN_DTB)		+= $(addsuffix .o, $(dtb-y))
> diff --git a/arch/mips/boot/dts/intel-mips/easy350_anywan.dts b/arch/mips/boot/dts/intel-mips/easy350_anywan.dts
> new file mode 100644
> index 000000000000..e5e95f90c5e7
> --- /dev/null
> +++ b/arch/mips/boot/dts/intel-mips/easy350_anywan.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include <dt-bindings/interrupt-controller/mips-gic.h>
> +#include <dt-bindings/clock/intel,grx500-clk.h>
> +
> +#include "xrx500.dtsi"
> +
> +/ {
> +	model = "EASY350 ANYWAN (GRX350) Main model";

Main model can be removed, it does not identify the board.

> +	compatible = "intel,easy350-anywan";

I think this should be
	compatible = "intel,easy350-anywan", "intel,xrx500";

Are there different revisions of the EASY350 Anywan board or only of the
EASY550 board?There are at least some differences in the power supply on
the EASY550 V1 and EASY550 V2 board. I would suggest to be here very
specific to make it easier when adding more boards.

> +
> +	aliases {
> +		serial0 = &asc0;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon=lantiq,0x16600000 clk_ignore_unused";

What happens when you remove clk_ignore_unused?
If it crashes we should probably define some of the clock to be always
active.

> +		stdout-path = "serial0";
> +	};
> +
> +	memory@20000000 {
> +		device_type = "memory";
> +		reg = <0x20000000 0x0e000000>;
> +	};
> +};
> diff --git a/arch/mips/boot/dts/intel-mips/xrx500.dtsi b/arch/mips/boot/dts/intel-mips/xrx500.dtsi
> new file mode 100644
> index 000000000000..54c5f8f8b604
> --- /dev/null
> +++ b/arch/mips/boot/dts/intel-mips/xrx500.dtsi
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "intel,xrx500";
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "mti,interaptiv";
> +			clocks = <&cgu CLK_CPU>;
> +			reg = <0>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "mti,interaptiv";
> +			reg = <1>;
> +		};
> +	};
> +
> +	cpu_intc: interrupt-controller {
> +		compatible = "mti,cpu-interrupt-controller";
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +	};
> +
> +	gic: gic@12320000 {
> +		compatible = "mti,gic";
> +		reg = <0x12320000 0x20000>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		/*
> +		 * Declare the interrupt-parent even though the mti,gic
> +		 * binding doesn't require it, such that the kernel can
> +		 * figure out that cpu_intc is the root interrupt
> +		 * controller & should be probed first.
> +		 */
> +		interrupt-parent = <&cpu_intc>;
> +		mti,reserved-ipi-vectors = <56 8>;
> +	};
> +
> +	cgu: cgu@16200000 {
> +		compatible = "intel,grx500-cgu", "syscon";
> +		reg = <0x16200000 0x200>;
> +		#clock-cells = <1>;
> +	};
> +
> +	asc0: serial@16600000 {
> +		compatible = "lantiq,asc";
> +		reg = <0x16600000 0x100000>;
> +
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
> +		clock-names = "freq", "asc";
> +	};
> +};
> 



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]