linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler
@ 2003-07-21 16:15 system_lists
  2003-07-21 19:41 ` Aurelien Jarno
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: system_lists @ 2003-07-21 16:15 UTC (permalink / raw)
  To: linux-kernel


Hi there.

    I have a production server with a SiI680 pci device beeing used as a 
IDE controler.
    Conected to the external IDE controler I have 4 120GB IDE disks just in 
raid5 Linux-software mode.

Well, I have detected some problems that i cannot understand (I am not a 
expert so ... :-( ) ...
( I was using a HighPoint some time ago which gave me the same problems. I 
though I had got to fix the problems getting a new IDE controler but its 
coming back and ... i prefer to fix the problem before I lose more 
information (critical one) as i got after these last problems).

I am getting problems in the ide-buses (I guess).

a) I have cheked the 4 HD just doing:

badblocks -b 4096 -o /tmp/hde_badblocks /dev/hde
badblocks -b 4096 -o /tmp/hdf_badblocks /dev/hdf
badblocks -b 4096 -o /tmp/hdg_badblocks /dev/hdg
badblocks -b 4096 -o /tmp/hdh_badblocks /dev/hdh

and all is OK so i think its a problem in the IDE controler or just in the 
driver (I am not sure).

b) the cables are new. I got new cables (certificated) when i got the 
HighPoint out just with the same problems (resets on IDE buses ...).
The IDE controler is new too.

Please, could any help me a bit?
Please...

Could be the problem the temperature in the Box?

(My english is terrible .. please sorry me).

------------------------------------------------------------------------------------------
I will add this info:

1- Log with the problems detected by the kernel (paste)
2- System information (from boot logs)
----

1 *** Problems logs:

Jul 20 00:00:57 server01 kernel: hdf: dma_timer_expiry: dma status == 0x60
Jul 20 00:00:57 server01 kernel: hdf: timeout waiting for DMA
Jul 20 00:00:57 server01 kernel: hdf: timeout waiting for DMA
Jul 20 00:00:57 server01 kernel: hdh: dma_timer_expiry: dma status == 0x61
Jul 20 00:01:07 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:01:07 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:08 server01 kernel: hdg: DMA disabled
Jul 20 00:01:09 server01 kernel: ide3: reset: success
Jul 20 00:01:17 server01 kernel: hde: dma_timer_expiry: dma status == 0x21
Jul 20 00:01:27 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:01:27 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:01:27 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 00:01:27 server01 kernel:
Jul 20 00:01:27 server01 kernel: hdf: drive not ready for command
Jul 20 00:01:27 server01 kernel: hde: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:27 server01 kernel: hde: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:27 server01 kernel: hde: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:27 server01 kernel: hde: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:28 server01 kernel: hde: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:28 server01 kernel: hde: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:28 server01 kernel: hde: read_intr: status=0x51 { DriveReady 
SeekComplete Error }
Jul 20 00:01:28 server01 kernel: hde: read_intr: error=0x04 { 
DriveStatusError }
Jul 20 00:01:28 server01 kernel: ide2: reset: success
Jul 20 00:01:28 server01 kernel: blk: queue c02c8e08, I/O limit 4095Mb 
(mask 0xffffffff)
Jul 20 00:01:29 server01 kernel: hdh: dma_timer_expiry: dma status == 0x41
Jul 20 00:01:39 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:01:39 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:01:39 server01 kernel: hdg: status error: status=0x7f { 
DriveReady DeviceFault SeekComplete DataRequest CorrectedError Ind
ex Error }
Jul 20 00:01:39 server01 kernel: hdg: status error: error=0x7f { 
DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFo
und AddrMarkNotFound }, LBAsect=8830695997311, high=526350, low=8355711, 
sector=62666160
Jul 20 00:01:39 server01 kernel: hdg: drive not ready for command
Jul 20 00:01:39 server01 kernel: ide3: reset: success
Jul 20 00:01:39 server01 kernel: blk: queue c02c93c8, I/O limit 4095Mb 
(mask 0xffffffff)
Jul 20 00:01:48 server01 kernel: hde: dma_timer_expiry: dma status == 0x21
Jul 20 00:01:58 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:01:58 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:01:59 server01 kernel: hdh: dma_timer_expiry: dma status == 0x41
Jul 20 00:02:08 server01 kernel: hdf: lost interrupt
Jul 20 00:02:08 server01 kernel: blk: queue c02c8f54, I/O limit 4095Mb 
(mask 0xffffffff)
Jul 20 00:02:08 server01 kernel: hdf: dma_intr: status=0x40 { DriveReady }
Jul 20 00:02:08 server01 kernel:
Jul 20 00:02:08 server01 kernel: hdf: dma_intr: status=0x40 { DriveReady }
Jul 20 00:02:08 server01 kernel:
Jul 20 00:02:08 server01 kernel: hdf: dma_intr: status=0x40 { DriveReady }
Jul 20 00:02:08 server01 kernel:
Jul 20 00:02:08 server01 kernel: hdf: dma_intr: status=0x40 { DriveReady }
Jul 20 00:02:08 server01 kernel:
Jul 20 00:02:08 server01 kernel: hdf: DMA disabled
Jul 20 00:02:08 server01 kernel: ide2: reset: success
Jul 20 00:02:09 server01 kernel: blk: queue c02c8e08, I/O limit 4095Mb 
(mask 0xffffffff)
Jul 20 00:02:09 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:02:09 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:02:09 server01 kernel: blk: queue c02c93c8, I/O limit 4095Mb 
(mask 0xffffffff)
Jul 20 00:02:29 server01 kernel: hde: dma_timer_expiry: dma status == 0x21
Jul 20 00:02:29 server01 kernel: hdh: dma_timer_expiry: dma status == 0x41
Jul 20 00:02:39 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:02:39 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:02:39 server01 kernel: hdf: status error: status=0x7f { 
DriveReady DeviceFault SeekComplete DataRequest CorrectedError Ind
ex Error }
Jul 20 00:02:39 server01 kernel: hdf: status error: error=0x7f { 
DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFo
und AddrMarkNotFound }, LBAsect=149568947698815, high=8915003, 
low=16727167, sector=62669312
Jul 20 00:02:39 server01 kernel: hdf: drive not ready for command
Jul 20 00:02:39 server01 kernel: ide2: reset: success
Jul 20 00:02:39 server01 kernel: blk: queue c02c8e08, I/O limit 4095Mb 
(mask 0xffffffff)
Jul 20 00:02:39 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:02:39 server01 kernel: hdh: timeout waiting for DMA
Jul 20 00:02:39 server01 kernel: hdg: status error: status=0x7f { 
DriveReady DeviceFault SeekComplete DataRequest CorrectedError Ind
ex Error }
Jul 20 00:02:39 server01 kernel: hdg: status error: error=0x7f { 
DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFo
und AddrMarkNotFound }, LBAsect=8831518080895, high=526399, low=8355711, 
sector=62656544
Jul 20 00:02:39 server01 kernel: hdg: drive not ready for command
Jul 20 00:02:40 server01 kernel: ide3: reset: success
Jul 20 00:02:59 server01 kernel: hde: dma_timer_expiry: dma status == 0x21
Jul 20 00:03:09 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:03:09 server01 kernel: hde: timeout waiting for DMA
Jul 20 00:03:09 server01 kernel: hde: status error: status=0x58 { 
DriveReady SeekComplete DataRequest }
Jul 20 00:03:09 server01 kernel:
Jul 20 00:03:09 server01 kernel: hde: drive not ready for command
Jul 20 00:03:09 server01 kernel: hde: status timeout: status=0xd0 { Busy }
Jul 20 00:03:09 server01 kernel:
Jul 20 00:03:09 server01 kernel: hde: no DRQ after issuing WRITE
Jul 20 00:03:10 server01 kernel: ide2: reset: success
Jul 20 00:03:12 server01 kernel: is_tree_node: node level 89 does not match 
to the expected one 1
Jul 20 00:03:12 server01 kernel: vs-5150: search_by_key: invalid format 
found in block 16938917. Fsck?
Jul 20 00:03:12 server01 kernel: vs-13070: reiserfs_read_inode2: i/o 
failure occurred trying to find stat data of [29810 29818 0x0 S
D]
Jul 20 00:03:12 server01 kernel: is_tree_node: node level 0 does not match 
to the expected one 1
Jul 20 00:03:12 server01 kernel: vs-5150: search_by_key: invalid format 
found in block 16939041. Fsck?
Jul 20 00:03:12 server01 kernel: vs-13070: reiserfs_read_inode2: i/o 
failure occurred trying to find stat data of [29737 29745 0x0 S
D]
Jul 20 00:03:12 server01 kernel: is_tree_node: node level 65 does not match 
to the expected one 1
Jul 20 00:03:12 server01 kernel: vs-5150: search_by_key: invalid format 
found in block 16939427. Fsck?

-- <- PROBLEMS in ReiserFS here (generated by the IDE failures). Got the 
info back doing a --rebuild.tree but ... what are the names of the files?? 
i dont know ...

Jul 20 01:10:38 server01 kernel:
Jul 20 01:10:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:10:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:10:38 server01 kernel:
Jul 20 01:10:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:10:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:10:38 server01 kernel:
Jul 20 01:10:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:10:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:10:38 server01 kernel:
Jul 20 01:10:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:10:38 server01 kernel: ide2: reset: success
Jul 20 01:30:39 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:30:39 server01 kernel:
Jul 20 01:30:39 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:30:39 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:30:39 server01 kernel:
Jul 20 01:30:39 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:30:39 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:30:39 server01 kernel:
Jul 20 01:30:39 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:30:39 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:30:39 server01 kernel:
Jul 20 01:30:39 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:30:39 server01 kernel: ide2: reset: success
Jul 20 01:40:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:40:38 server01 kernel:
Jul 20 01:40:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:40:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:40:38 server01 kernel:
Jul 20 01:40:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:40:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:40:38 server01 kernel:
Jul 20 01:40:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:40:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 01:40:38 server01 kernel:
Jul 20 01:40:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 01:40:38 server01 kernel: ide2: reset: success
Jul 20 02:05:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 02:05:38 server01 kernel:
Jul 20 02:05:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 02:05:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 02:05:38 server01 kernel:
Jul 20 02:05:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 02:05:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 02:05:38 server01 kernel:
Jul 20 02:05:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 02:05:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 02:05:38 server01 kernel:
Jul 20 02:05:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 02:05:38 server01 kernel: ide2: reset: success
Jul 20 08:25:11 server01 kernel: is_tree_node: node level 80 does not match 
to the expected one 1
Jul 20 08:25:11 server01 kernel: vs-5150: search_by_key: invalid format 
found in block 17561769. Fsck?
Jul 20 08:25:11 server01 kernel: zam-7001: io error in reiserfs_find_entry

-- <- more and more logs about ReiserFS consistence. Needing a fsck..

Jul 20 09:45:37 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 09:45:37 server01 kernel:
Jul 20 09:45:37 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 09:45:37 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 09:45:37 server01 kernel:
Jul 20 09:45:37 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 09:45:37 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 09:45:37 server01 kernel:
Jul 20 09:45:37 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 09:45:37 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 09:45:37 server01 kernel:
Jul 20 09:45:37 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 09:45:37 server01 kernel: ide2: reset: success
--
Jul 20 11:35:06 server01 kernel: hdf: read_intr: status=0x59 { DriveReady 
SeekComplete DataRequest Error }
Jul 20 11:35:06 server01 kernel: hdf: read_intr: error=0x10 { 
SectorIdNotFound }, LBAsect=46433302, high=2, low=12878870, sector=464
33248
--
Jul 20 11:50:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 11:50:38 server01 kernel:
Jul 20 11:50:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 11:50:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 11:50:38 server01 kernel:
Jul 20 11:50:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 11:50:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 11:50:38 server01 kernel:
Jul 20 11:50:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 11:50:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 11:50:38 server01 kernel:
Jul 20 11:50:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 11:50:38 server01 kernel: ide2: reset: success
--
Jul 20 12:00:39 server01 kernel: hde: status error: status=0x58 { 
DriveReady SeekComplete DataRequest }
Jul 20 12:00:39 server01 kernel:
Jul 20 12:00:39 server01 kernel: hde: drive not ready for command
Jul 20 12:00:39 server01 kernel: hde: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 12:00:39 server01 kernel:
Jul 20 12:00:39 server01 kernel: hde: no DRQ after issuing WRITE
Jul 20 12:00:39 server01 kernel: hde: status timeout: status=0xd0 { Busy }
Jul 20 12:00:39 server01 kernel:
Jul 20 12:00:39 server01 kernel: hde: drive not ready for command
Jul 20 12:00:39 server01 kernel: ide2: reset: success
--
Jul 20 12:20:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 12:20:38 server01 kernel:
Jul 20 12:20:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 12:20:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 12:20:38 server01 kernel:
Jul 20 12:20:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 12:20:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 12:20:38 server01 kernel:
Jul 20 12:20:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 12:20:38 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 12:20:38 server01 kernel:
Jul 20 12:20:38 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 12:20:38 server01 kernel: ide2: reset: success
--
more and more about hdf
--
Jul 20 15:10:38 server01 kernel: hde: status error: status=0x58 { 
DriveReady SeekComplete DataRequest }
Jul 20 15:10:38 server01 kernel:
Jul 20 15:10:38 server01 kernel: hde: drive not ready for command
Jul 20 15:10:38 server01 kernel: hde: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 15:10:38 server01 kernel:
Jul 20 15:10:38 server01 kernel: hde: no DRQ after issuing WRITE
Jul 20 15:10:38 server01 kernel: hde: status timeout: status=0xd0 { Busy }
Jul 20 15:10:38 server01 kernel:
Jul 20 15:10:38 server01 kernel: hde: drive not ready for command
Jul 20 15:10:38 server01 kernel: ide2: reset: success
Jul 20 15:20:03 server01 kernel: hde: status error: status=0x58 { 
DriveReady SeekComplete DataRequest }
Jul 20 15:20:03 server01 kernel:
Jul 20 15:20:03 server01 kernel: hde: drive not ready for command
Jul 20 15:20:03 server01 kernel: hde: status timeout: status=0xd0 { Busy }
Jul 20 15:20:03 server01 kernel:
Jul 20 15:20:03 server01 kernel: hde: no DRQ after issuing WRITE
Jul 20 15:20:03 server01 kernel: ide2: reset: success
--


and so on ....

AT THE FINISH hdf goes out of raid5:


Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x58 { 
DriveReady SeekComplete DataRequest }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x50 { 
DriveReady SeekComplete }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: no DRQ after issuing WRITE
Jul 20 17:16:34 server01 kernel: ide2: reset: success
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: ide2: reset: success
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: end_request: I/O error, dev 21:41 (hdf), 
sector 11464
Jul 20 17:16:34 server01 kernel: raid5: Disk failure on hdf1, disabling 
device. Operation continuing on 3 devices
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: hdf: status error: status=0x00 { }
Jul 20 17:16:34 server01 kernel:
Jul 20 17:16:34 server01 kernel: hdf: drive not ready for command
Jul 20 17:16:34 server01 kernel: md: updating md0 RAID superblock on device
Jul 20 17:16:34 server01 kernel: md: hdh1 [events: 0000000f]<6>(write) 
hdh1's sb offset: 117218176
Jul 20 17:16:34 server01 kernel: md: recovery thread got woken up ...
Jul 20 17:16:34 server01 kernel: md0: no spare disk to reconstruct array! 
-- continuing in degraded mode
Jul 20 17:16:34 server01 kernel: md: recovery thread finished ...
Jul 20 17:16:34 server01 kernel: md: hdg1 [events: 0000000f]<6>(write) 
hdg1's sb offset: 117218176
Jul 20 17:16:34 server01 kernel: md: (skipping faulty hdf1 )
Jul 20 17:16:34 server01 kernel: md: hde1 [events: 0000000f]<6>(write) 
hde1's sb offset: 117218176
Jul 20 17:16:34 server01 kernel: ide2: reset: success

<- HERE (17:22:12) i come back from my vacations (just in time!) and reset 
the system.

i have re-add the ide device to the Raid and all is perfect (by the moment 
...).

--------------------------------------------------------------------------------------------------------------

2 *** System Information:

Jul  7 21:31:49 server01 kernel: Detected 1002.298 MHz processor.
Jul  7 21:31:49 server01 kernel: Memory: 127380k/131072k available
--
Jul  7 21:31:49 server01 kernel: Intel machine check architecture supported.
Jul  7 21:31:49 server01 kernel: Intel machine check reporting enabled on 
CPU#0.
--
Jul  7 21:31:49 server01 kernel: CPU: Intel Celeron (Coppermine) stepping 0a
--
Jul  7 21:31:49 server01 kernel: SiI680: IDE controller at PCI slot 00:09.0
Jul  7 21:31:49 server01 kernel: PCI: Found IRQ 11 for device 00:09.0
Jul  7 21:31:49 server01 kernel: SiI680: chipset revision 2
Jul  7 21:31:49 server01 kernel: SiI680: not 100%% native mode: will probe 
irqs later
Jul  7 21:31:49 server01 kernel: SiI680: BASE CLOCK == 100
--
Jul  7 21:31:49 server01 kernel:     ide2: MMIO-DMA , BIOS settings: 
hde:pio, hdf:pio
Jul  7 21:31:49 server01 kernel:     ide3: MMIO-DMA , BIOS settings: 
hdg:pio, hdh:pio
Jul  7 21:31:49 server01 kernel: hde: ST3120022A, ATA DISK drive
Jul  7 21:31:49 server01 kernel: hdf: ST3120022A, ATA DISK drive
Jul  7 21:31:49 server01 kernel: blk: queue c02c8e08, I/O limit 4095Mb 
(mask 0xffffffff)
Jul  7 21:31:49 server01 kernel: blk: queue c02c8f54, I/O limit 4095Mb 
(mask 0xffffffff)
Jul  7 21:31:49 server01 kernel: hdg: IC35L120AVV207-0, ATA DISK drive
Jul  7 21:31:49 server01 kernel: hdh: ST3120022A, ATA DISK drive
Jul  7 21:31:49 server01 kernel: blk: queue c02c927c, I/O limit 4095Mb 
(mask 0xffffffff)
Jul  7 21:31:49 server01 kernel: blk: queue c02c93c8, I/O limit 4095Mb 
(mask 0xffffffff)
Jul  7 21:31:49 server01 kernel: ide2 at 0xc8818080-0xc8818087,0xc881808a 
on irq 11
Jul  7 21:31:49 server01 kernel: ide3 at 0xc88180c0-0xc88180c7,0xc88180ca 
on irq 11
--
Jul  7 21:31:49 server01 kernel: hde: attached ide-disk driver.
Jul  7 21:31:49 server01 kernel: hde: host protected area => 1
Jul  7 21:31:49 server01 kernel: hde: 234441648 sectors (120034 MB) 
w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
Jul  7 21:31:49 server01 kernel: hdf: attached ide-disk driver.
Jul  7 21:31:49 server01 kernel: hdf: host protected area => 1
Jul  7 21:31:49 server01 kernel: hdf: 234441648 sectors (120034 MB) 
w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
Jul  7 21:31:49 server01 kernel: hdg: attached ide-disk driver.
Jul  7 21:31:49 server01 kernel: hdg: host protected area => 1
Jul  7 21:31:49 server01 kernel: hdg: 241254720 sectors (123522 MB) 
w/1821KiB Cache, CHS=15017/255/63, UDMA(100)
Jul  7 21:31:49 server01 kernel: hdh: attached ide-disk driver.
Jul  7 21:31:49 server01 kernel: hdh: host protected area => 1
Jul  7 21:31:49 server01 kernel: hdh: 234441648 sectors (120034 MB) 
w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
--


^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler
  2003-07-21 16:15 Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler system_lists
@ 2003-07-21 19:41 ` Aurelien Jarno
  2003-07-22 11:42 ` David Zaffiro
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 8+ messages in thread
From: Aurelien Jarno @ 2003-07-21 19:41 UTC (permalink / raw)
  To: system_lists; +Cc: linux-kernel

On Mon, Jul 21, 2003 at 06:15:32PM +0200, system_lists@nullzone.org wrote:
> 
> Hi there.
Hello,

>    I have a production server with a SiI680 pci device beeing used as a 
> IDE controler.

I am also using this IDE controller, but with a Compact Flash used as an
IDE disk.

[...]
> Jul 20 00:00:57 server01 kernel: hdf: dma_timer_expiry: dma status == 0x60
> Jul 20 00:00:57 server01 kernel: hdf: timeout waiting for DMA
> Jul 20 00:00:57 server01 kernel: hdf: timeout waiting for DMA
> Jul 20 00:00:57 server01 kernel: hdh: dma_timer_expiry: dma status == 0x61
> Jul 20 00:01:07 server01 kernel: hdh: timeout waiting for DMA
> Jul 20 00:01:07 server01 kernel: hdh: timeout waiting for DMA
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady SeekComplete Error }
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { DriveStatusError }
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady SeekComplete Error }
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { DriveStatusError }
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady SeekComplete Error }
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { DriveStatusError }
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: status=0x51 { DriveReady SeekComplete Error }
> Jul 20 00:01:08 server01 kernel: hdh: read_intr: error=0x04 { DriveStatusError }
> Jul 20 00:01:08 server01 kernel: hdg: DMA disabled
> Jul 20 00:01:09 server01 kernel: ide3: reset: success
> Jul 20 00:01:17 server01 kernel: hde: dma_timer_expiry: dma status == 0x21

I got exactly the same problems. At the beginning I thought it was due
to the compactflash which doesn't support DMA, but disabling it in the
kernel doesn't change anything.

The disk is usable, but sometimes at boot, everything is lost on the
disk (at least the ext3 partition is not recognized).

BTW, I've tried with a 2.6.0-test1 kernel, and it was not able to boot,
I have got a lot of "ide: lost interrupt", just after loading the SiI680
driver.

Cheers,
Aurelien

^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler
  2003-07-21 16:15 Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler system_lists
  2003-07-21 19:41 ` Aurelien Jarno
@ 2003-07-22 11:42 ` David Zaffiro
  2003-07-23  9:18   ` system_lists
  2003-07-23 14:15 ` Mark Watts
  2003-07-23 22:49 ` Alan Cox
  3 siblings, 1 reply; 8+ messages in thread
From: David Zaffiro @ 2003-07-22 11:42 UTC (permalink / raw)
  To: system_lists; +Cc: linux-kernel

>    I have a production server with a SiI680 pci device being used as a 
> IDE controller.
>    Connected to the external IDE controller I have 4 120GB IDE disks just 
> in raid5 Linux-software mode.
> 
> Well, I have detected some problems that i cannot understand (I am not a 
> expert so ... :-( ) ...
> ( I was using a HighPoint some time ago which gave me the same problems. 

Some time ago, I've had the same problem booting gentoo-1.4-rc2 with my Promise PDC20276, I had to append "acpi=off", otherwise the kernel-image of the cdrom suffered from the same problems... Maybe that'll help to get your production-server back online? 

However, I couldn't determine whether you are using ACPI, perhaps not. Personally, I wouldn't choose to use power-management (neither apm nor acpi) on a server in the first place, but that's just me...


^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler
  2003-07-22 11:42 ` David Zaffiro
@ 2003-07-23  9:18   ` system_lists
  0 siblings, 0 replies; 8+ messages in thread
From: system_lists @ 2003-07-23  9:18 UTC (permalink / raw)
  To: David Zaffiro; +Cc: linux-kernel

Hello David,

     thanks for the reply!

     As its a production server im not using any power management as you said.

Thanks again.

Regards

At 13:42 22/07/2003 +0200, David Zaffiro wrote:
>>    I have a production server with a SiI680 pci device being used as a 
>> IDE controller.
>>    Connected to the external IDE controller I have 4 120GB IDE disks 
>> just in raid5 Linux-software mode.
>>Well, I have detected some problems that i cannot understand (I am not a 
>>expert so ... :-( ) ...
>>( I was using a HighPoint some time ago which gave me the same problems.
>
>Some time ago, I've had the same problem booting gentoo-1.4-rc2 with my 
>Promise PDC20276, I had to append "acpi=off", otherwise the kernel-image 
>of the cdrom suffered from the same problems... Maybe that'll help to get 
>your production-server back online?
>However, I couldn't determine whether you are using ACPI, perhaps not. 
>Personally, I wouldn't choose to use power-management (neither apm nor 
>acpi) on a server in the first place, but that's just me...
>





^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Problems with IDE - Ultra-ATA devices on a SiI chipset IDE  controler
  2003-07-21 16:15 Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler system_lists
  2003-07-21 19:41 ` Aurelien Jarno
  2003-07-22 11:42 ` David Zaffiro
@ 2003-07-23 14:15 ` Mark Watts
  2003-07-23 22:49 ` Alan Cox
  3 siblings, 0 replies; 8+ messages in thread
From: Mark Watts @ 2003-07-23 14:15 UTC (permalink / raw)
  To: system_lists, linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


> Hi there.
>
>     I have a production server with a SiI680 pci device beeing used as a
> IDE controler.
>     Conected to the external IDE controler I have 4 120GB IDE disks just in
> raid5 Linux-software mode.
>
> Well, I have detected some problems that i cannot understand (I am not a
> expert so ... :-( ) ...
> ( I was using a HighPoint some time ago which gave me the same problems. I
> though I had got to fix the problems getting a new IDE controler but its
> coming back and ... i prefer to fix the problem before I lose more
> information (critical one) as i got after these last problems).
>
> I am getting problems in the ide-buses (I guess).
>
> a) I have cheked the 4 HD just doing:
>
> badblocks -b 4096 -o /tmp/hde_badblocks /dev/hde
> badblocks -b 4096 -o /tmp/hdf_badblocks /dev/hdf
> badblocks -b 4096 -o /tmp/hdg_badblocks /dev/hdg
> badblocks -b 4096 -o /tmp/hdh_badblocks /dev/hdh
>
> and all is OK so i think its a problem in the IDE controler or just in the
> driver (I am not sure).
>
> b) the cables are new. I got new cables (certificated) when i got the
> HighPoint out just with the same problems (resets on IDE buses ...).
> The IDE controler is new too.
>
> Please, could any help me a bit?
> Please...
>
> Could be the problem the temperature in the Box?
>
> (My english is terrible .. please sorry me).
>

I have a CMD ATA/133 RAID controller, using the Sil 680 chipset and dont 
experience any of these issues.
I have a Maxtor 160GB drive as master on one channel, and an IBM 40GB as 
master on the other channel, so I'm not using raid in any form.

I'm using both 2.4.21 and 2.4.19 with this hardware...

- From dmesg:

CMD680: IDE controller on PCI bus 02 dev 48
CMD680: chipset revision 1
CMD680: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xe8c0-0xe8c7, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xe8c8-0xe8cf, BIOS settings: hdg:pio, hdh:pio
...
hde: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=79780/16/63, UDMA(100)
hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, 
UDMA(100)

I wonder if the fact that the bios is setting PIO is the clue here, and you 
shouldn't be using dma on them, even though the drives are DMA...? (I get 
confused by the discrepancy between what the controler reports and what the 
drives report, so I'm winging it a bit here)

Mark.

- -- 
Mark Watts
Senior Systems Engineer
QinetiQ TIM
St Andrews Road, Malvern
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE/HphoBn4EFUVUIO0RArOkAJ4hvJCdBZ6BtjujEWY3ok4mwsqqbwCfe2oo
EL5ddn5xyk9jbGIf3GSLxaw=
=OCD7
-----END PGP SIGNATURE-----


^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler
  2003-07-21 16:15 Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler system_lists
                   ` (2 preceding siblings ...)
  2003-07-23 14:15 ` Mark Watts
@ 2003-07-23 22:49 ` Alan Cox
  2003-07-23 23:20   ` system_lists
  3 siblings, 1 reply; 8+ messages in thread
From: Alan Cox @ 2003-07-23 22:49 UTC (permalink / raw)
  To: system_lists; +Cc: Linux Kernel Mailing List

What drives and kernel revision are you using. I have fixed some SI680
problems fairly recently but I'd have expected different failure
patterns (the old code would put some UDMA100 devices into UDMA133 which
got interesting).

Yes folks you *can* overclock IDE disks but its not a good idea


^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler
  2003-07-23 22:49 ` Alan Cox
@ 2003-07-23 23:20   ` system_lists
  2003-07-24 11:32     ` Alan Cox
  0 siblings, 1 reply; 8+ messages in thread
From: system_lists @ 2003-07-23 23:20 UTC (permalink / raw)
  To: Alan Cox; +Cc: Linux Kernel Mailing List

Hello Alan,

    I am just using 2.4.21 kernel version (standard drivers of this kernel).

Let me know if could be useful to send more information or if you need that 
I do some tests (let me know what you need and i will do).

Thanks.

At 23:49 23/07/2003 +0100, Alan Cox wrote:
>What drives and kernel revision are you using. I have fixed some SI680
>problems fairly recently but I'd have expected different failure
>patterns (the old code would put some UDMA100 devices into UDMA133 which
>got interesting).
>
>Yes folks you *can* overclock IDE disks but its not a good idea





^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler
  2003-07-23 23:20   ` system_lists
@ 2003-07-24 11:32     ` Alan Cox
  0 siblings, 0 replies; 8+ messages in thread
From: Alan Cox @ 2003-07-24 11:32 UTC (permalink / raw)
  To: system_lists; +Cc: Linux Kernel Mailing List

On Iau, 2003-07-24 at 00:20, system_lists@nullzone.org wrote:
> Hello Alan,
> 
>     I am just using 2.4.21 kernel version (standard drivers of this kernel).
> 
> Let me know if could be useful to send more information or if you need that 
> I do some tests (let me know what you need and i will do).

Can you test 2.4.22pre7 as a starter. That would confirm its a bug in
the current IDE code still not a maybe fixed one


^ permalink raw reply	[flat|nested] 8+ messages in thread
end of thread, other threads:[~2003-07-24 11:23 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-21 16:15 Problems with IDE - Ultra-ATA devices on a SiI chipset IDE controler system_lists
2003-07-21 19:41 ` Aurelien Jarno
2003-07-22 11:42 ` David Zaffiro
2003-07-23  9:18   ` system_lists
2003-07-23 14:15 ` Mark Watts
2003-07-23 22:49 ` Alan Cox
2003-07-23 23:20   ` system_lists
2003-07-24 11:32     ` Alan Cox

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).