From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Fabio Baltieri <fabio.baltieri@gmail.com>
Cc: linux-can@vger.kernel.org, linux-kernel@vger.kernel.org,
Oliver Hartkopp <socketcan@hartkopp.net>,
Wolfgang Grandegger <wg@grandegger.com>
Subject: Re: [PATCH can-next v4] can: add tx/rx LED trigger support
Date: Wed, 01 Aug 2012 13:37:45 +0200 [thread overview]
Message-ID: <50191509.8030404@pengutronix.de> (raw)
In-Reply-To: <20120801103032.GA1385@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1505 bytes --]
On 08/01/2012 12:30 PM, Fabio Baltieri wrote:
[...]
>>> +void can_led_init(struct net_device *netdev)
>>> +{
>>> + struct can_priv *priv = netdev_priv(netdev);
>>> + void *res;
>>> +
>>> + res = devres_alloc(can_led_release, 0, GFP_KERNEL);
>> ^
>> I'm not really sure if this is working. For example, pinctrl [1]
>> allocates a double pointer here. The res pointer here and in
>> can_led_release simply points to invalid memory. But as long as you
>> don't dereference it, it should work.
>>
>> [1] http://lxr.free-electrons.com/source/drivers/pinctrl/core.c#L862
>
> Actually that's also used by libata-core (not in lxr yet) and dma-mapping:
>
> http://lxr.free-electrons.com/source/drivers/base/dma-mapping.c#L193
>
> actually, res should point at the end of some internal devres structure,
> and is only used as return value in this case.
>
> Of course, in this case the release function can only use the struct
> device pointer.
>
> I've run some fail test and ftraced the whole thing and it seems to work
> pretty good! I'll send a v5 with the rename later.
Thanks for checking. I just noticed, the pinctrl usecase is a bit different.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2012-08-01 11:38 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 19:20 [PATCH can-next v3 1/2] can: add tx/rx LED trigger support Fabio Baltieri
2012-07-30 19:20 ` [PATCH can-next v3 2/2] can: flexcan: add " Fabio Baltieri
2012-07-30 21:17 ` [PATCH can-next v3 1/2] can: add tx/rx " Marc Kleine-Budde
2012-07-31 6:57 ` Fabio Baltieri
2012-07-31 7:10 ` Marc Kleine-Budde
2012-07-31 11:57 ` Fabio Baltieri
2012-07-31 12:00 ` Marc Kleine-Budde
2012-07-31 22:05 ` [PATCH can-next v4] " Fabio Baltieri
2012-08-01 9:36 ` Marc Kleine-Budde
2012-08-01 10:07 ` Marc Kleine-Budde
2012-08-01 10:30 ` Fabio Baltieri
2012-08-01 11:37 ` Marc Kleine-Budde [this message]
2012-08-01 11:49 ` [PATCH can-next v5 1/2] " Fabio Baltieri
2012-08-01 11:49 ` [PATCH can-next v5 2/2] can: flexcan: add " Fabio Baltieri
2012-08-01 11:53 ` Marc Kleine-Budde
2012-08-01 12:24 ` Fabio Baltieri
2012-08-01 12:30 ` Marc Kleine-Budde
2012-08-01 21:02 ` Marc Kleine-Budde
2012-08-01 11:59 ` [PATCH can-next v5 1/2] can: add tx/rx " Marc Kleine-Budde
2012-08-01 12:06 ` Oliver Hartkopp
2012-08-01 12:18 ` Marc Kleine-Budde
2012-08-01 18:21 ` [PATCH can-next v6] " Fabio Baltieri
2012-08-01 21:00 ` Marc Kleine-Budde
2012-08-01 22:38 ` Fabio Baltieri
2012-08-01 21:05 ` Oliver Hartkopp
2012-08-24 5:10 ` Kurt Van Dijck
2012-08-24 11:28 ` Marc Kleine-Budde
2012-08-24 12:42 ` Kurt Van Dijck
2012-08-24 22:01 ` Fabio Baltieri
2012-08-25 20:25 ` Kurt Van Dijck
2012-09-03 12:40 ` Marc Kleine-Budde
2012-09-03 18:13 ` Kurt Van Dijck
2012-09-03 18:29 ` Fabio Baltieri
2012-09-03 20:54 ` Oliver Hartkopp
2012-09-04 7:11 ` Kurt Van Dijck
2012-09-04 9:29 ` [PATCH] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-06 18:59 ` Fabio Baltieri
2012-09-06 19:31 ` Oliver Hartkopp
2012-09-06 20:46 ` Fabio Baltieri
2012-09-07 7:19 ` Kurt Van Dijck
2012-09-09 16:17 ` [PATCH v2] " Fabio Baltieri
2012-09-10 14:25 ` [PATCH] can: export a safe netdev_priv wrapper for candev Kurt Van Dijck
2012-09-10 18:22 ` Oliver Hartkopp
2012-09-10 18:29 ` Fabio Baltieri
2012-09-10 19:55 ` [PATCH v2] " Kurt Van Dijck
2012-09-10 14:28 ` [PATCH v3] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-10 18:25 ` Oliver Hartkopp
2012-09-10 18:40 ` Fabio Baltieri
2012-09-10 19:01 ` Oliver Hartkopp
2012-09-10 20:08 ` Kurt Van Dijck
2012-09-11 5:42 ` Oliver Hartkopp
2012-09-11 7:13 ` Fabio Baltieri
2012-09-12 7:22 ` Kurt Van Dijck
2012-09-11 8:05 ` Kurt Van Dijck
2012-09-10 20:06 ` [PATCH v4] " Kurt Van Dijck
2012-09-11 21:04 ` Fabio Baltieri
2012-09-04 20:15 ` [PATCH can-next v6] can: add tx/rx LED trigger support Fabio Baltieri
2012-09-06 10:33 ` Kurt Van Dijck
2012-09-06 11:17 ` Fabio Baltieri
2012-09-06 15:11 ` Kurt Van Dijck
2012-09-06 20:57 ` Fabio Baltieri
2012-09-07 7:04 ` Kurt Van Dijck
2012-09-07 18:59 ` Fabio Baltieri
2012-07-31 8:46 ` [PATCH can-next v3 1/2] " Wolfgang Grandegger
2012-07-31 10:12 ` Marc Kleine-Budde
2012-07-31 11:55 ` Fabio Baltieri
2012-07-31 12:14 ` Fabio Baltieri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50191509.8030404@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=fabio.baltieri@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).