From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757539Ab2IKJNS (ORCPT ); Tue, 11 Sep 2012 05:13:18 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:58505 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751244Ab2IKJNQ (ORCPT ); Tue, 11 Sep 2012 05:13:16 -0400 Message-ID: <504F009D.3050208@ti.com> Date: Tue, 11 Sep 2012 11:13:01 +0200 From: Benoit Cousson Organization: Texas Instruments User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:15.0) Gecko/20120827 Thunderbird/15.0 MIME-Version: 1.0 To: Kishon Vijay Abraham I CC: , , , , , , , , , , , , , Subject: Re: [PATCH v2 1/3] arm: omap: hwmod: add a new addr space in otg for writing to control module References: <1347354580-5895-1-git-send-email-kishon@ti.com> <1347354580-5895-2-git-send-email-kishon@ti.com> In-Reply-To: <1347354580-5895-2-git-send-email-kishon@ti.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 09/11/2012 11:09 AM, Kishon Vijay Abraham I wrote: > The mailbox register for usb otg in omap is present in control module. > On detection of any events VBUS or ID, this register should be written > to send the notification to musb core. > > Till we have a separate control module driver to write to control module, > omap2430 will handle the register writes to control module by itself. So > a new address space to represent this control module register is added > to usb_otg_hs. > > Signed-off-by: Kishon Vijay Abraham I Acked-by: Benoit Cousson > --- > arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c > index 242aee4..3c19120 100644 > --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c > +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c > @@ -5890,6 +5890,12 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { > .pa_end = 0x4a0ab003, > .flags = ADDR_TYPE_RT > }, > + { > + /* XXX: Remove this once control module driver is in place */ > + .pa_start = 0x4a00233c, > + .pa_end = 0x4a00233f, > + .flags = ADDR_TYPE_RT > + }, > { } > }; > >