[PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Krzysztof Kozlowski]

Hi,

Patchset adds necessary clocks, reorganizes existing stuff and finally
adds Odroid XU support.

Merging strategy
================
Complicated! The clock dt-bindings and driver changes can go to clock
tree. However there are three DTS patches in the middle.
a. This has to go in before adding "fin_pll_new" to clock driver:
   - [PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver

b. This should go in before renaming "fin_pll_new" back to original name:
   - [PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock
   - [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410

The order of patches in the patchset is really how it should go in
to reduce any bisectability glitches.


Changes since v1
================
1. A lot of new patches.
2. Removed some TODO notes (eMMC 4.5 so no RCLK pin).
3. New clocks, more reorganization.
4. New common DTSI: exynos54xx.dtsi. I know, it is getting more
   and more complicated but this might help removing duplications
   and keeping everything under control.


Best regards,
Krzysztof


Krzysztof Kozlowski (22):
  dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  ARM: dts: exynos: Add fin_pll node for clock driver
  clk: samsung: exynos5410: Provide fin_pll external fixed clock
  ARM: dts: exynos: Switch MCT node to a new fin_pll clock
  ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410
  clk: samsung: exynos5410: Rename fin_pll from temporary to regular
    name
  clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl
    nodes
  ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  ARM: dts: exynos: Move common nodes to exynos5.dtsi
  ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in
    exynos5410.dtsi
  ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc
  ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  ARM: dts: exynos: Enable UART3 on Exynos5410
  ARM: dts: exynos: MCT is not an interrupt controller and extend length
    of iomap
  ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  ARM: dts: exynos: Add USB to Exynos5410
  ARM: dts: exynos: Add initial support for Odroid XU board

 .../bindings/arm/samsung/samsung-boards.txt        |    1 +
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/exynos5.dtsi                     |  171 +-
 arch/arm/boot/dts/exynos5250-snow-common.dtsi      |    2 +-
 arch/arm/boot/dts/exynos5250.dtsi                  | 1718 +++++++++--------
 arch/arm/boot/dts/exynos5410-odroidxu.dts          |  166 ++
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi          |   77 +
 arch/arm/boot/dts/exynos5410-smdk5410.dts          |   16 +-
 arch/arm/boot/dts/exynos5410.dtsi                  |  204 +-
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi          |   12 +-
 arch/arm/boot/dts/exynos5420.dtsi                  | 1981 ++++++++++----------
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts    |   35 +-
 arch/arm/boot/dts/exynos5422-odroidxu3.dts         |   35 +-
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi    |   50 +
 arch/arm/boot/dts/exynos54xx.dtsi                  |  142 ++
 drivers/clk/samsung/clk-exynos5410.c               |   52 +
 include/dt-bindings/clock/exynos5410.h             |   64 +-
 17 files changed, 2519 insertions(+), 2208 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
 create mode 100644 arch/arm/boot/dts/exynos54xx.dtsi

-- 
2.5.0

[PATCH v2 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs

[Krzysztof Kozlowski]

Add license and copyrights (file introduced in 2014) to header with
Exynos5410 clock IDs. Additionally reformat it to improve readability.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 include/dt-bindings/clock/exynos5410.h | 54 ++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 22 deletions(-)

diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
index 9b180f032e2d..213f19e02870 100644
--- a/include/dt-bindings/clock/exynos5410.h
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -1,33 +1,43 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Exynos5421 clock controller.
+*/
+
 #ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
 #define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
 
 /* core clocks */
-#define CLK_FIN_PLL 1
-#define CLK_FOUT_APLL 2
-#define CLK_FOUT_CPLL 3
-#define CLK_FOUT_MPLL 4
-#define CLK_FOUT_BPLL 5
-#define CLK_FOUT_KPLL 6
+#define CLK_FIN_PLL		1
+#define CLK_FOUT_APLL		2
+#define CLK_FOUT_CPLL		3
+#define CLK_FOUT_MPLL		4
+#define CLK_FOUT_BPLL		5
+#define CLK_FOUT_KPLL		6
 
 /* gate for special clocks (sclk) */
-#define CLK_SCLK_UART0 128
-#define CLK_SCLK_UART1 129
-#define CLK_SCLK_UART2 130
-#define CLK_SCLK_UART3 131
-#define CLK_SCLK_MMC0 132
-#define CLK_SCLK_MMC1 133
-#define CLK_SCLK_MMC2 134
+#define CLK_SCLK_UART0		128
+#define CLK_SCLK_UART1		129
+#define CLK_SCLK_UART2		130
+#define CLK_SCLK_UART3		131
+#define CLK_SCLK_MMC0		132
+#define CLK_SCLK_MMC1		133
+#define CLK_SCLK_MMC2		134
 
 /* gate clocks */
-#define CLK_UART0 257
-#define CLK_UART1 258
-#define CLK_UART2 259
-#define CLK_UART3 260
-#define CLK_MCT 315
-#define CLK_MMC0 351
-#define CLK_MMC1 352
-#define CLK_MMC2 353
+#define CLK_UART0		257
+#define CLK_UART1		258
+#define CLK_UART2		259
+#define CLK_UART3		260
+#define CLK_MCT			315
+#define CLK_MMC0		351
+#define CLK_MMC1		352
+#define CLK_MMC2		353
 
-#define CLK_NR_CLKS 512
+#define CLK_NR_CLKS		512
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
-- 
2.5.0

[PATCH v2 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410

[Krzysztof Kozlowski]

Add IDs for PWM and USB clocks to Exynos5410. Use the same number as for
Exynos5420 just in case in future these drivers were merged.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 include/dt-bindings/clock/exynos5410.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
index 213f19e02870..34c8e96987a1 100644
--- a/include/dt-bindings/clock/exynos5410.h
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2016 Krzysztof Kozlowski
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -27,16 +28,25 @@
 #define CLK_SCLK_MMC0		132
 #define CLK_SCLK_MMC1		133
 #define CLK_SCLK_MMC2		134
+#define CLK_SCLK_USBD300	150
+#define CLK_SCLK_USBD301	151
+#define CLK_SCLK_USBPHY300	152
+#define CLK_SCLK_USBPHY301	153
+#define CLK_SCLK_PWM		155
 
 /* gate clocks */
 #define CLK_UART0		257
 #define CLK_UART1		258
 #define CLK_UART2		259
 #define CLK_UART3		260
+#define CLK_PWM			279
 #define CLK_MCT			315
 #define CLK_MMC0		351
 #define CLK_MMC1		352
 #define CLK_MMC2		353
+#define CLK_USBH20		365
+#define CLK_USBD300		366
+#define CLK_USBD301		367
 
 #define CLK_NR_CLKS		512
 
-- 
2.5.0

[PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver

[Krzysztof Kozlowski]

For consistency between Exynos5410 and Exynos542x/5800 switch to similar
way of defining fin_pll/oscclk. Add a node early, before implementing
this in driver to preserve bisectability.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 0f6429e1b75c..d7d658deeff4 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -31,6 +31,13 @@
 		#clock-cells = <0>;
 	};
 
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
 	firmware@02037000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x02037000 0x1000>;
-- 
2.5.0

[PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock

[Krzysztof Kozlowski]

Just like clock driver for Exynos542x/5800, provide the fixed clock here
so the clock bindings and their consumers would be consistent and
similar.

However a clock named "fin_pll" is already provided by generic
fixed-clock and it is both referenced in the clock driver (by name) and
in DT (by phandle). To make the transition smooth, first introduce the
new external fixed clock here under temporary, different name and switch
internal users to it.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/samsung/clk-exynos5410.c | 42 +++++++++++++++++++++++++-----------
 1 file changed, 29 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index d5d5dcabc4a9..35f2cb36f7ef 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -59,23 +59,29 @@ enum exynos5410_plls {
 };
 
 /* list of all parent clocks */
-PNAME(apll_p)		= { "fin_pll", "fout_apll", };
-PNAME(bpll_p)		= { "fin_pll", "fout_bpll", };
-PNAME(cpll_p)		= { "fin_pll", "fout_cpll" };
-PNAME(mpll_p)		= { "fin_pll", "fout_mpll", };
-PNAME(kpll_p)		= { "fin_pll", "fout_kpll", };
+PNAME(apll_p)		= { "fin_pll_new", "fout_apll", };
+PNAME(bpll_p)		= { "fin_pll_new", "fout_bpll", };
+PNAME(cpll_p)		= { "fin_pll_new", "fout_cpll" };
+PNAME(mpll_p)		= { "fin_pll_new", "fout_mpll", };
+PNAME(kpll_p)		= { "fin_pll_new", "fout_kpll", };
 
 PNAME(mout_cpu_p)	= { "mout_apll", "sclk_mpll", };
 PNAME(mout_kfc_p)	= { "mout_kpll", "sclk_mpll", };
 
-PNAME(mpll_user_p)	= { "fin_pll", "sclk_mpll", };
-PNAME(bpll_user_p)	= { "fin_pll", "sclk_bpll", };
+PNAME(mpll_user_p)	= { "fin_pll_new", "sclk_mpll", };
+PNAME(bpll_user_p)	= { "fin_pll_new", "sclk_bpll", };
 PNAME(mpll_bpll_p)	= { "sclk_mpll_muxed", "sclk_bpll_muxed", };
 
-PNAME(group2_p)		= { "fin_pll", "fin_pll", "none", "none",
+PNAME(group2_p)		= { "fin_pll_new", "fin_pll_new", "none", "none",
 			"none", "none", "sclk_mpll_bpll",
 			 "none", "none", "sclk_cpll" };
 
+/* fixed rate clocks generated outside the soc */
+static struct samsung_fixed_rate_clock
+		exynos5x_fixed_rate_ext_clks[] __initdata = {
+	FRATE(CLK_FIN_PLL, "fin_pll_new", NULL, 0, 0),
+};
+
 static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
 	MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
 	MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
@@ -168,18 +174,24 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 };
 
 static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
-	[apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
+	[apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll_new", APLL_LOCK,
 		APLL_CON0, NULL),
-	[cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
+	[cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll_new", CPLL_LOCK,
 		CPLL_CON0, NULL),
-	[mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
+	[mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll_new", MPLL_LOCK,
 		MPLL_CON0, NULL),
-	[bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
+	[bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll_new", BPLL_LOCK,
 		BPLL_CON0, NULL),
-	[kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
+	[kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll_new", KPLL_LOCK,
 		KPLL_CON0, NULL),
 };
 
+/* Same as in Exynos5420 */
+static const struct of_device_id ext_clk_match[] __initconst = {
+	{ .compatible = "samsung,exynos5420-oscclk", .data = (void *)0, },
+	{ },
+};
+
 /* register exynos5410 clocks */
 static void __init exynos5410_clk_init(struct device_node *np)
 {
@@ -192,6 +204,10 @@ static void __init exynos5410_clk_init(struct device_node *np)
 
 	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
 
+	samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
+			ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
+			ext_clk_match);
+
 	samsung_clk_register_pll(ctx, exynos5410_plls,
 			ARRAY_SIZE(exynos5410_plls), reg_base);
 
-- 
2.5.0

[PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock

[Krzysztof Kozlowski]

The clk-exynos5410 driver now provides the "fin_pll" external fixed
clock. Switch the Multi-Core Timer to this clock.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 7a56aec2c5ba..233149abfb62 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -125,7 +125,7 @@
 			interrupts = <0>, <1>, <2>, <3>,
 				<4>, <5>, <6>, <7>,
 				<8>, <9>, <10>, <11>;
-			clocks = <&fin_pll>, <&clock CLK_MCT>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 
 			interrupt_map: interrupt-map {
-- 
2.5.0

[PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410

[Krzysztof Kozlowski]

All "fin_pll" clock users are switched to the new one, provided by
Exynos5410 clock driver. Remove old DT node.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index d7d658deeff4..377a679b454b 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -24,13 +24,6 @@
 		bootargs = "console=ttySAC2,115200";
 	};
 
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
 	fixed-rate-clocks {
 		oscclk {
 			compatible = "samsung,exynos5420-oscclk";
-- 
2.5.0

[PATCH v2 07/22] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name

[Krzysztof Kozlowski]

For smooth transition of fin_pll to clk-exynos5410.c from fixed-clock
driver, initially it was named "fin_pll_new". Fix this here.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/samsung/clk-exynos5410.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index 35f2cb36f7ef..a7d714435307 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -59,27 +59,27 @@ enum exynos5410_plls {
 };
 
 /* list of all parent clocks */
-PNAME(apll_p)		= { "fin_pll_new", "fout_apll", };
-PNAME(bpll_p)		= { "fin_pll_new", "fout_bpll", };
-PNAME(cpll_p)		= { "fin_pll_new", "fout_cpll" };
-PNAME(mpll_p)		= { "fin_pll_new", "fout_mpll", };
-PNAME(kpll_p)		= { "fin_pll_new", "fout_kpll", };
+PNAME(apll_p)		= { "fin_pll", "fout_apll", };
+PNAME(bpll_p)		= { "fin_pll", "fout_bpll", };
+PNAME(cpll_p)		= { "fin_pll", "fout_cpll" };
+PNAME(mpll_p)		= { "fin_pll", "fout_mpll", };
+PNAME(kpll_p)		= { "fin_pll", "fout_kpll", };
 
 PNAME(mout_cpu_p)	= { "mout_apll", "sclk_mpll", };
 PNAME(mout_kfc_p)	= { "mout_kpll", "sclk_mpll", };
 
-PNAME(mpll_user_p)	= { "fin_pll_new", "sclk_mpll", };
-PNAME(bpll_user_p)	= { "fin_pll_new", "sclk_bpll", };
+PNAME(mpll_user_p)	= { "fin_pll", "sclk_mpll", };
+PNAME(bpll_user_p)	= { "fin_pll", "sclk_bpll", };
 PNAME(mpll_bpll_p)	= { "sclk_mpll_muxed", "sclk_bpll_muxed", };
 
-PNAME(group2_p)		= { "fin_pll_new", "fin_pll_new", "none", "none",
+PNAME(group2_p)		= { "fin_pll", "fin_pll", "none", "none",
 			"none", "none", "sclk_mpll_bpll",
 			 "none", "none", "sclk_cpll" };
 
 /* fixed rate clocks generated outside the soc */
 static struct samsung_fixed_rate_clock
 		exynos5x_fixed_rate_ext_clks[] __initdata = {
-	FRATE(CLK_FIN_PLL, "fin_pll_new", NULL, 0, 0),
+	FRATE(CLK_FIN_PLL, "fin_pll", NULL, 0, 0),
 };
 
 static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
@@ -174,15 +174,15 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 };
 
 static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
-	[apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll_new", APLL_LOCK,
+	[apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
 		APLL_CON0, NULL),
-	[cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll_new", CPLL_LOCK,
+	[cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
 		CPLL_CON0, NULL),
-	[mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll_new", MPLL_LOCK,
+	[mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
 		MPLL_CON0, NULL),
-	[bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll_new", BPLL_LOCK,
+	[bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
 		BPLL_CON0, NULL),
-	[kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll_new", KPLL_LOCK,
+	[kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
 		KPLL_CON0, NULL),
 };
 
-- 
2.5.0

[PATCH v2 08/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks

[Krzysztof Kozlowski]

Just like other Exynos5 family SoCs, this one has four UARTs. Add
missing UART3 clocks to the Exynso5410 clock driver.

Add clocks for USB and PWM.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/samsung/clk-exynos5410.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index a7d714435307..40775f678f02 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -33,9 +33,11 @@
 #define SRC_CPERI1		0x4204
 #define DIV_TOP0		0x10510
 #define DIV_TOP1		0x10514
+#define DIV_FSYS0		0x10548
 #define DIV_FSYS1		0x1054c
 #define DIV_FSYS2		0x10550
 #define DIV_PERIC0		0x10558
+#define DIV_PERIC3		0x10564
 #define SRC_TOP0		0x10210
 #define SRC_TOP1		0x10214
 #define SRC_TOP2		0x10218
@@ -44,6 +46,8 @@
 #define SRC_MASK_FSYS		0x10340
 #define SRC_MASK_PERIC0		0x10350
 #define GATE_BUS_FSYS0		0x10740
+#define GATE_TOP_SCLK_FSYS	0x10840
+#define GATE_TOP_SCLK_PERIC	0x10850
 #define GATE_IP_FSYS		0x10944
 #define GATE_IP_PERIC		0x10950
 #define GATE_IP_PERIS		0x10960
@@ -71,6 +75,7 @@ PNAME(mout_kfc_p)	= { "mout_kpll", "sclk_mpll", };
 PNAME(mpll_user_p)	= { "fin_pll", "sclk_mpll", };
 PNAME(bpll_user_p)	= { "fin_pll", "sclk_bpll", };
 PNAME(mpll_bpll_p)	= { "sclk_mpll_muxed", "sclk_bpll_muxed", };
+PNAME(sclk_mpll_bpll_p)	= { "sclk_mpll_bpll", "fin_pll", };
 
 PNAME(group2_p)		= { "fin_pll", "fin_pll", "none", "none",
 			"none", "none", "sclk_mpll_bpll",
@@ -102,10 +107,14 @@ static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
 	MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
 	MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
 	MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
+	MUX(0, "mout_usbd300", sclk_mpll_bpll_p, SRC_FSYS, 28, 1),
+	MUX(0, "mout_usbd301", sclk_mpll_bpll_p, SRC_FSYS, 29, 1),
 
 	MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
 	MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
 	MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
+	MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 12, 4),
+	MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 4),
 
 	MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
 	MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
@@ -127,6 +136,11 @@ static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 	DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
 	DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
 
+	DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
+	DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 20, 4),
+	DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
+	DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 28, 4),
+
 	DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
 	DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
 	DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
@@ -143,6 +157,8 @@ static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 	DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
 	DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
 
+	DIV(0, "dout_pwm", "mout_pwm", DIV_PERIC3, 0, 4),
+
 	DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
 	DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
 };
@@ -161,9 +177,23 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 	GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
 	GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
 
+	GATE(CLK_SCLK_USBPHY301, "sclk_usbphy301", "dout_usbphy301",
+	     GATE_TOP_SCLK_FSYS, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBPHY300, "sclk_usbphy300", "dout_usbphy300",
+	     GATE_TOP_SCLK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBD300, "sclk_usbd300", "dout_usbd300",
+	     GATE_TOP_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
+	     GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_SCLK_PWM, "sclk_pwm", "dout_pwm",
+	     GATE_TOP_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
+
 	GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
 	GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
 	GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+	GATE(CLK_UART3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0),
+	GATE(CLK_PWM, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0),
 
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
 			SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
@@ -171,6 +201,12 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 			SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
 			SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART3, "sclk_uart3", "div_uart3",
+			SRC_MASK_PERIC0, 12, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
 };
 
 static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
-- 
2.5.0

[PATCH v2 09/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes

[Krzysztof Kozlowski]

The 'sd0_rclk' was put in the middle of SD1 nodes. Remove the confusion.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 130563b2ca95..14beb7e07323 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -193,17 +193,17 @@
 		samsung,pin-drv = <3>;
 	};
 
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpc1-0";
+	sd0_rclk: sd0-rclk {
+		samsung,pins = "gpc0-7";
 		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <1>;
 		samsung,pin-drv = <3>;
 	};
 
-	sd0_rclk: sd0-rclk {
-		samsung,pins = "gpc0-7";
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
 		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
+		samsung,pin-pud = <0>;
 		samsung,pin-drv = <3>;
 	};
 
-- 
2.5.0

[PATCH v2 10/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels

[Krzysztof Kozlowski]

Fro consistency lowercase node labels are used.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 233149abfb62..58d3844ef923 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -35,28 +35,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
-- 
2.5.0

[PATCH v2 11/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card

[Krzysztof Kozlowski]

Configure the pinctrl for MMC0 (eMMC) and MMC2 (microSD card).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 77 +++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index f9aa6bb55464..72fc659d0637 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -277,6 +277,83 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
 };
 
 &pinctrl_1 {
-- 
2.5.0

[PATCH v2 12/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI

[Krzysztof Kozlowski]

The LED nodes can be shared between Odroid XU3, XU3-Lite and XU (not yet
added) thus removing duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 35 +----------------
 arch/arm/boot/dts/exynos5422-odroidxu3.dts      | 35 +----------------
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 50 +++++++++++++++++++++++++
 3 files changed, 52 insertions(+), 68 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 2ae1cf41dcb6..03fa88c45426 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -14,44 +14,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &pwm {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 432406db85de..9ed6564acfb0 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -13,44 +13,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &i2c_0 {
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..0ed30206625c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
-- 
2.5.0

[PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi

[Krzysztof Kozlowski]

Exynos5420 and Exynos5250 share some nodes: the PWM and syscon
(sysreg_system_controller). Move them to parent DTSI to avoid
duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5.dtsi    | 12 ++++++++++++
 arch/arm/boot/dts/exynos5250.dtsi | 19 +++++--------------
 arch/arm/boot/dts/exynos5420.dtsi | 19 +++++--------------
 3 files changed, 22 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index d5c0f18a4223..fe901152f3ea 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -63,6 +63,11 @@
 		interrupts = <1 9 0xf04>;
 	};
 
+	sysreg_system_controller: syscon@10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
 	serial_0: serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -87,6 +92,13 @@
 		interrupts = <0 54 0>;
 	};
 
+	pwm: pwm@12DD0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12DD0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+	};
+
 	rtc: rtc@101E0000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index c7158b2fb213..6762faaf12a8 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -235,11 +235,6 @@
 		interrupt-parent = <&gic>;
 	};
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
 	watchdog@101D0000 {
 		compatible = "samsung,exynos5250-wdt";
 		reg = <0x101D0000 0x100>;
@@ -662,15 +657,6 @@
 		samsung,pmureg-phandle = <&pmu_system_controller>;
 	};
 
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1070,6 +1056,11 @@
 	iommus = <&sysmmu_fimd1>;
 };
 
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 4c8523471c65..f7322d87095f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -542,15 +542,6 @@
 		status = "disabled";
 	};
 
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
 	dp_phy: dp-video-phy {
 		compatible = "samsung,exynos5420-dp-video-phy";
 		samsung,pmu-syscon = <&pmu_system_controller>;
@@ -823,11 +814,6 @@
 		interrupt-parent = <&gic>;
 	};
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
 	tmu_cpu0: tmu@10060000 {
 		compatible = "samsung,exynos5420-tmu";
 		reg = <0x10060000 0x100>;
@@ -1207,6 +1193,11 @@
 	iommu-names = "m0", "m1";
 };
 
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
-- 
2.5.0

[PATCH v2 14/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi

[Krzysztof Kozlowski]

Add 'sromc' label to SROM memory controller in common exynos5.dtsi so it
can be referenced by inheriting DTSI.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index fe901152f3ea..7c83dc6ef972 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -31,7 +31,7 @@
 		reg = <0x10000000 0x100>;
 	};
 
-	memory-controller@12250000 {
+	sromc: memory-controller@12250000 {
 		compatible = "samsung,exynos4210-srom";
 		reg = <0x12250000 0x14>;
 	};
-- 
2.5.0

[PATCH v2 15/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow

[Krzysztof Kozlowski]

The i2c-arbitrator node in exynos5250-snow-common used absolute path to
reference other node (the i2c parent). Use phandle instead, because the
depth of the other node may be changed (like moving it under 'soc'
node).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index ddfe1f558c10..419d59da1751 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -61,7 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c-parent = <&{/i2c@12CA0000}>;
+		i2c-parent = <&i2c_4>;
 
 		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
 		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-- 
2.5.0

[PATCH v2 16/22] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc

[Krzysztof Kozlowski]

The conventions it to put SoC devices under 'soc' node. In fact other
our DTSes (like exynos3250.dtsi or exynos5410.dtsi) already follows it.
Adjust exynos5250 and exynos5420 DTSI to follow this convention. This is
also necessary for the upcoming change in exynos5410.dtsi to inherit
from common exynos5.dtsi.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5.dtsi    |  201 ++--
 arch/arm/boot/dts/exynos5250.dtsi | 1699 +++++++++++++++---------------
 arch/arm/boot/dts/exynos5420.dtsi | 2039 +++++++++++++++++++------------------
 3 files changed, 1976 insertions(+), 1963 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 7c83dc6ef972..68820713b66e 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -26,103 +26,110 @@
 		serial3 = &serial_3;
 	};
 
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
-	sromc: memory-controller@12250000 {
-		compatible = "samsung,exynos4210-srom";
-		reg = <0x12250000 0x14>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
-
-	gic: interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x10481000 0x1000>,
-			<0x10482000 0x1000>,
-			<0x10484000 0x2000>,
-			<0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
-	serial_0: serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-	};
-
-	serial_1: serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial_2: serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial_3: serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	pwm: pwm@12DD0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12DD0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-	};
-
-	rtc: rtc@101E0000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
-		status = "disabled";
-	};
-
-	fimd: fimd@14400000 {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
-		samsung,sysreg = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	dp: dp-controller@145B0000 {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145B0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
+	soc: soc {
+		compatible = "simple-bus";
 		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
+		#size-cells = <1>;
+		ranges;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sromc: memory-controller@12250000 {
+			compatible = "samsung,exynos4210-srom";
+			reg = <0x12250000 0x14>;
+		};
+
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		sysreg_system_controller: syscon@10050000 {
+			compatible = "samsung,exynos5-sysreg", "syscon";
+			reg = <0x10050000 0x5000>;
+		};
+
+		serial_0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 51 0>;
+		};
+
+		serial_1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 52 0>;
+		};
+
+		serial_2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 53 0>;
+		};
+
+		serial_3: serial@12C30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C30000 0x100>;
+			interrupts = <0 54 0>;
+		};
+
+		pwm: pwm@12DD0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x12DD0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+		};
+
+		rtc: rtc@101E0000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x101E0000 0x100>;
+			interrupts = <0 43 0>, <0 44 0>;
+			status = "disabled";
+		};
+
+		fimd: fimd@14400000 {
+			compatible = "samsung,exynos5250-fimd";
+			interrupt-parent = <&combiner>;
+			reg = <0x14400000 0x40000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <18 4>, <18 5>, <18 6>;
+			samsung,sysreg = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		dp: dp-controller@145B0000 {
+			compatible = "samsung,exynos5-dp";
+			reg = <0x145B0000 0x1000>;
+			interrupts = <10 3>;
+			interrupt-parent = <&combiner>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 6762faaf12a8..cb1eb546a0f2 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -96,948 +96,951 @@
 		};
 	};
 
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x30000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x30000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
+	soc: soc {
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x30000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x30000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
 		};
 
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
+		pd_gsc: gsc-power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
 		};
-	};
-
-	pd_gsc: gsc-power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-	};
 
-	pd_mfc: mfc-power-domain@10044040 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044040 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pd_mfc: mfc-power-domain@10044040 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044040 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	pd_disp1: disp1-power-domain@100440A0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440A0 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
-			 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
-		clock-names = "oscclk", "clk0", "clk1";
-	};
+		pd_disp1: disp1-power-domain@100440A0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440A0 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
+				 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
+			clock-names = "oscclk", "clk0", "clk1";
+		};
 
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5250-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5250-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5250-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5250-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+		};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		/* Unfortunately we need this since some versions of U-Boot
-		 * on Exynos don't set the CNTFRQ register, so we need the
-		 * value from DT.
-		 */
-		clock-frequency = <24000000>;
-	};
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
+			/*
+			 * Unfortunately we need this since some versions
+			 * of U-Boot on Exynos don't set the CNTFRQ register,
+			 * so we need the value from DT.
+			 */
+			clock-frequency = <24000000>;
+		};
 
-	mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
+		mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0x800>;
+			interrupt-controller;
 			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &combiner 23 3>,
-					<0x1 0 &combiner 23 4>,
-					<0x2 0 &combiner 25 2>,
-					<0x3 0 &combiner 25 3>,
-					<0x4 0 &gic 0 120 0>,
-					<0x5 0 &gic 0 121 0>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+				     <4 0>, <5 0>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+
+			mct_map: mct-map {
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0x0 0 &combiner 23 3>,
+						<0x1 0 &combiner 23 4>,
+						<0x2 0 &combiner 25 2>,
+						<0x3 0 &combiner 25 3>,
+						<0x4 0 &gic 0 120 0>,
+						<0x5 0 &gic 0 121 0>;
+			};
 		};
-	};
 
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>, <22 4>;
-	};
+		pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupt-parent = <&combiner>;
+			interrupts = <1 2>, <22 4>;
+		};
 
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 46 0>;
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 46 0>;
 
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
 		};
-	};
 
-	pinctrl_1: pinctrl@13400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-	};
+		pinctrl_1: pinctrl@13400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 0>;
+		};
 
-	pinctrl_2: pinctrl@10d10000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x10d10000 0x1000>;
-		interrupts = <0 50 0>;
-	};
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <0 50 0>;
+		};
 
-	pinctrl_3: pinctrl@03860000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
+		pinctrl_3: pinctrl@03860000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 0>;
+		};
 
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5250-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5250-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
 
-	watchdog@101D0000 {
-		compatible = "samsung,exynos5250-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		watchdog@101D0000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x101D0000 0x100>;
+			interrupts = <0 42 0>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
 
-	g2d@10850000 {
-		compatible = "samsung,exynos5250-g2d";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-		clocks = <&clock CLK_G2D>;
-		clock-names = "fimg2d";
-		iommus = <&sysmmu_g2d>;
-	};
+		g2d@10850000 {
+			compatible = "samsung,exynos5250-g2d";
+			reg = <0x10850000 0x1000>;
+			interrupts = <0 91 0>;
+			clocks = <&clock CLK_G2D>;
+			clock-names = "fimg2d";
+			iommus = <&sysmmu_g2d>;
+		};
 
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v6";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		power-domains = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v6";
+			reg = <0x11000000 0x10000>;
+			interrupts = <0 96 0>;
+			power-domains = <&pd_mfc>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
 
-	rotator: rotator@11C00000 {
-		compatible = "samsung,exynos5250-rotator";
-		reg = <0x11C00000 0x64>;
-		interrupts = <0 84 0>;
-		clocks = <&clock CLK_ROTATOR>;
-		clock-names = "rotator";
-		iommus = <&sysmmu_rotator>;
-	};
+		rotator: rotator@11C00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <0 84 0>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	tmu: tmu@10060000 {
-		compatible = "samsung,exynos5250-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		tmu: tmu@10060000 {
+			compatible = "samsung,exynos5250-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <0 65 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
+		sata: sata@122F0000 {
+			compatible = "snps,dwc-ahci";
+			samsung,sata-freq = <66>;
+			reg = <0x122F0000 0x1ff>;
+			interrupts = <0 115 0>;
+			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
+			clock-names = "sata", "sclk_sata";
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
 
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 9 9>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 15 15>;
-			       };
-		       };
+		sata_phy: sata-phy@12170000 {
+			compatible = "samsung,exynos5250-sata-phy";
+			reg = <0x12170000 0x1ff>;
+			clocks = <&clock CLK_SATA_PHYCTRL>;
+			clock-names = "sata_phyctrl";
+			#phy-cells = <0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
 		};
-	};
 
-	sata: sata@122F0000 {
-		compatible = "snps,dwc-ahci";
-		samsung,sata-freq = <66>;
-		reg = <0x122F0000 0x1ff>;
-		interrupts = <0 115 0>;
-		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-		clock-names = "sata", "sclk_sata";
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-		status = "disabled";
-	};
+		i2c_0: i2c@12C60000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C60000 0x100>;
+			interrupts = <0 56 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock CLK_SATA_PHYCTRL>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		i2c_1: i2c@12C70000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C70000 0x100>;
+			interrupts = <0 57 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_2: i2c@12C80000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C80000 0x100>;
+			interrupts = <0 58 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_3: i2c@12C90000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C90000 0x100>;
+			interrupts = <0 59 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_4: i2c@12CA0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CA0000 0x100>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
 
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_5: i2c@12CB0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CB0000 0x100>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
 
-	i2c_4: i2c@12CA0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
+		i2c_6: i2c@12CC0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CC0000 0x100>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
 
-	i2c_5: i2c@12CB0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
+		i2c_7: i2c@12CD0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CD0000 0x100>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
 
-	i2c_6: i2c@12CC0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
+		i2c_8: i2c@12CE0000 {
+			compatible = "samsung,s3c2440-hdmiphy-i2c";
+			reg = <0x12CE0000 0x1000>;
+			interrupts = <0 64 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C_HDMI>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
 
-	i2c_7: i2c@12CD0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
+		i2c_9: i2c@121D0000 {
+			compatible = "samsung,exynos5-sata-phy-i2c";
+			reg = <0x121D0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SATA_PHYI2C>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
 
-	i2c_8: i2c@12CE0000 {
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x12CE0000 0x1000>;
-		interrupts = <0 64 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d20000 0x100>;
+			interrupts = <0 66 0>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+		};
 
-	i2c_9: i2c@121D0000 {
-                compatible = "samsung,exynos5-sata-phy-i2c";
-                reg = <0x121D0000 0x100>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-		clocks = <&clock CLK_SATA_PHYI2C>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d30000 0x100>;
+			interrupts = <0 67 0>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+		};
 
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-	};
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d40000 0x100>;
+			interrupts = <0 68 0>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+		};
 
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-	};
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <0 75 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x1000>;
+			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-	};
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <0 76 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x1000>;
+			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x1000>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <0 77 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x1000>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_3: mmc@12230000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12230000 0x1000>;
+			interrupts = <0 78 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		i2s0: i2s@03830000 {
+			compatible = "samsung,s5pv210-i2s";
+			status = "disabled";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10
+				&pdma0 9
+				&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+		};
 
-	mmc_3: mmc@12230000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12230000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		i2s1: i2s@12D60000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12
+				&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+		};
 
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		status = "disabled";
-		reg = <0x03830000 0x100>;
-		dmas = <&pdma0 10
-			&pdma0 9
-			&pdma0 8>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
+		i2s2: i2s@12D70000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12
+				&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+		};
 
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-	};
+		usb_dwc3 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&clock CLK_USB3>;
+			clock-names = "usbdrd30";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3: dwc3@12000000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
 
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-	};
+		usbdrd_phy: phy@12100000 {
+			compatible = "samsung,exynos5250-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
 
-	usb_dwc3 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USB3>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
+		ehci: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
 
-		usbdrd_dwc3: dwc3@12000000 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy_gen 1>;
+			};
 		};
-	};
-
-	usbdrd_phy: phy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
 
-	ehci: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
+		ohci: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
 
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy_gen 1>;
+			};
 		};
-	};
 
-	ohci: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
+		usb2_phy_gen: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+		};
 
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@121A0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <0 34 0>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@121B0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <0 35 0>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			mdma0: mdma@10800000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10800000 0x1000>;
+				interrupts = <0 33 0>;
+				clocks = <&clock CLK_MDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+
+			mdma1: mdma@11C10000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11C10000 0x1000>;
+				interrupts = <0 124 0>;
+				clocks = <&clock CLK_MDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
 		};
-	};
 
-	usb2_phy_gen: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
+		gsc_0:  gsc@13e00000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <0 85 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc0>;
+		};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
+		gsc_1:  gsc@13e10000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <0 86 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc1>;
 		};
-	};
 
-	gsc_0:  gsc@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc0>;
-	};
+		gsc_2:  gsc@13e20000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e20000 0x1000>;
+			interrupts = <0 87 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL2>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc2>;
+		};
 
-	gsc_1:  gsc@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc1>;
-	};
+		gsc_3:  gsc@13e30000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e30000 0x1000>;
+			interrupts = <0 88 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL3>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc3>;
+		};
 
-	gsc_2:  gsc@13e20000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e20000 0x1000>;
-		interrupts = <0 87 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL2>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc2>;
-	};
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos4212-hdmi";
+			reg = <0x14530000 0x70000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <0 95 0>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+					"sclk_hdmiphy", "mout_hdmi";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
 
-	gsc_3:  gsc@13e30000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e30000 0x1000>;
-		interrupts = <0 88 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL3>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc3>;
-	};
+		mixer@14450000 {
+			compatible = "samsung,exynos5250-mixer";
+			reg = <0x14450000 0x10000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <0 94 0>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			iommus = <&sysmmu_tv>;
+		};
 
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x70000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		dp_phy: video-phy {
+			compatible = "samsung,exynos5250-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+		};
 
-	mixer@14450000 {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		iommus = <&sysmmu_tv>;
-	};
+		adc: adc@12D10000 {
+			compatible = "samsung,exynos-adc-v1";
+			reg = <0x12D10000 0x100>;
+			interrupts = <0 106 0>;
+			clocks = <&clock CLK_ADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	dp_phy: video-phy {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
+		sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <0 112 0>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
+		};
 
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_ADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		sysmmu_g2d: sysmmu@10A60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x300>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
+		sysmmu_mfc_r: sysmmu@11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_g2d: sysmmu@10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_l: sysmmu@11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_r: sysmmu@11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_rotator: sysmmu@11D40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_l: sysmmu@11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg: sysmmu@11F20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_rotator: sysmmu@11D40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11D40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_isp: sysmmu@13260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ISP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg: sysmmu@11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_drc: sysmmu@13270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DRC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_isp: sysmmu@13260000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13260000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ISP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_fd: sysmmu@132A0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132A0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_FD>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_drc: sysmmu@13270000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13270000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DRC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scc: sysmmu@13280000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13280000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 2>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_fd: sysmmu@132A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132A0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_FD>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scp: sysmmu@13290000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13290000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scc: sysmmu@13280000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13280000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 2>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132B0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_MCU>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scp: sysmmu@13290000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13290000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_odc: sysmmu@132C0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ODC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_mcuctl: sysmmu@132B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_MCU>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis0: sysmmu@132D0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_odc: sysmmu@132C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ODC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis1: sysmmu@132E0000{
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <9 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis0: sysmmu@132D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_3dnr: sysmmu@132F0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132F0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis1: sysmmu@132E0000{
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <9 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite0: sysmmu@13C40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_3dnr: sysmmu@132F0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132F0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite1: sysmmu@13C50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C50000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 1>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite0: sysmmu@13C40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc0: sysmmu@13E80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite1: sysmmu@13C50000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C50000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 1>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc1: sysmmu@13E90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc0: sysmmu@13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc2: sysmmu@13EA0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EA0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc1: sysmmu@13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc3: sysmmu@13EB0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EB0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 6>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc2: sysmmu@13EA0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EA0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimd1: sysmmu@14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc3: sysmmu@13EB0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EB0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 6>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
-		#iommu-cells = <0>;
+		sysmmu_tv: sysmmu@14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+			#iommu-cells = <0>;
+		};
 	};
 
-	sysmmu_fimd1: sysmmu@14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-		#iommu-cells = <0>;
-	};
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
 
-	sysmmu_tv: sysmmu@14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-		#iommu-cells = <0>;
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 9 9>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 15 15>;
+			       };
+		       };
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index f7322d87095f..3114cd6fb5d1 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -50,1129 +50,1132 @@
 		usbdrdphy1 = &usbdrd_phy1;
 	};
 
-	cluster_a15_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-		opp@1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1700000000 {
-			opp-hz = /bits/ 64 <1700000000>;
-			opp-microvolt = <1212500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1600000000 {
-			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <1175000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1112500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1062500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1012500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = < 987500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = < 962500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = < 937500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = < 912500>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
-	cluster_a7_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-		opp@1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1275000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1212500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1162500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1112500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1062500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <937500>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
 	/*
 	 * The 'cpus' node is not present here but instead it is provided
 	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
 	 */
 
-	cci: cci@10d20000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10d20000 0x1000>;
-		ranges = <0x0 0x10d20000 0x6000>;
-
-		cci_control0: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-		cci_control1: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
+	soc: soc {
+		cluster_a15_opp_table: opp_table0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp@1800000000 {
+				opp-hz = /bits/ 64 <1800000000>;
+				opp-microvolt = <1250000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1700000000 {
+				opp-hz = /bits/ 64 <1700000000>;
+				opp-microvolt = <1212500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1600000000 {
+				opp-hz = /bits/ 64 <1600000000>;
+				opp-microvolt = <1175000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1500000000 {
+				opp-hz = /bits/ 64 <1500000000>;
+				opp-microvolt = <1137500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1400000000 {
+				opp-hz = /bits/ 64 <1400000000>;
+				opp-microvolt = <1112500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1300000000 {
+				opp-hz = /bits/ 64 <1300000000>;
+				opp-microvolt = <1062500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1200000000 {
+				opp-hz = /bits/ 64 <1200000000>;
+				opp-microvolt = <1037500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <1012500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = < 987500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@900000000 {
+				opp-hz = /bits/ 64 <900000000>;
+				opp-microvolt = < 962500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = < 937500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = < 912500>;
+				clock-latency-ns = <140000>;
+			};
 		};
-	};
 
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x54000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x54000>;
+		cluster_a7_opp_table: opp_table1 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp@1300000000 {
+				opp-hz = /bits/ 64 <1300000000>;
+				opp-microvolt = <1275000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1200000000 {
+				opp-hz = /bits/ 64 <1200000000>;
+				opp-microvolt = <1212500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <1162500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = <1112500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@900000000 {
+				opp-hz = /bits/ 64 <900000000>;
+				opp-microvolt = <1062500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <1025000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = <975000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@600000000 {
+				opp-hz = /bits/ 64 <600000000>;
+				opp-microvolt = <937500>;
+				clock-latency-ns = <140000>;
+			};
+		};
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
+		cci: cci@10d20000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10d20000 0x1000>;
+			ranges = <0x0 0x10d20000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
 		};
 
-		smp-sysram@53000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x53000 0x1000>;
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
 		};
-	};
 
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5420-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5420-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5420-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5420-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
+				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+		};
 
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v7";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		power-domains = <&mfc_pd>;
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x11000000 0x10000>;
+			interrupts = <0 96 0>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			power-domains = <&mfc_pd>;
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x2000>;
-		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <0 75 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x2000>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x2000>;
-		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <0 76 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x2000>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5420-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5420-dw-mshc";
+			interrupts = <0 77 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
 
-	mct: mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
+		mct: mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0x800>;
+			interrupt-controller;
 			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &combiner 23 3>,
-					<1 &combiner 23 4>,
-					<2 &combiner 25 2>,
-					<3 &combiner 25 3>,
-					<4 &gic 0 120 0>,
-					<5 &gic 0 121 0>,
-					<6 &gic 0 122 0>,
-					<7 &gic 0 123 0>,
-					<8 &gic 0 128 0>,
-					<9 &gic 0 129 0>,
-					<10 &gic 0 130 0>,
-					<11 &gic 0 131 0>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+					<8>, <9>, <10>, <11>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+
+			mct_map: mct-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 0>,
+						<5 &gic 0 121 0>,
+						<6 &gic 0 122 0>,
+						<7 &gic 0 123 0>,
+						<8 &gic 0 128 0>,
+						<9 &gic 0 129 0>,
+						<10 &gic 0 130 0>,
+						<11 &gic 0 131 0>;
+			};
 		};
-	};
 
-	gsc_pd: power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
-			 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
-		clock-names = "oscclk", "clk0", "asb0", "asb1";
-	};
+		gsc_pd: power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
+				 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
+			clock-names = "oscclk", "clk0", "asb0", "asb1";
+		};
 
-	isp_pd: power-domain@10044020 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044020 0x20>;
-		#power-domain-cells = <0>;
-	};
+		isp_pd: power-domain@10044020 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044020 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "clk0";
-		#power-domain-cells = <0>;
-	};
+		mfc_pd: power-domain@10044060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044060 0x20>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
+			clock-names = "oscclk", "clk0";
+			#power-domain-cells = <0>;
+		};
 
-	msc_pd: power-domain@10044120 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044120 0x20>;
-		#power-domain-cells = <0>;
-	};
+		msc_pd: power-domain@10044120 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044120 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	disp_pd: power-domain@100440C0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440C0 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
-			 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
-		clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
-	};
+		disp_pd: power-domain@100440C0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440C0 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
+				 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
+				 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
+				 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
+			clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
+		};
 
-	pinctrl_0: pinctrl@13400000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 0>;
 
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
 		};
-	};
-
-	pinctrl_1: pinctrl@13410000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13410000 0x1000>;
-		interrupts = <0 78 0>;
-	};
 
-	pinctrl_2: pinctrl@14000000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14000000 0x1000>;
-		interrupts = <0 46 0>;
-	};
+		pinctrl_1: pinctrl@13410000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13410000 0x1000>;
+			interrupts = <0 78 0>;
+		};
 
-	pinctrl_3: pinctrl@14010000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14010000 0x1000>;
-		interrupts = <0 50 0>;
-	};
+		pinctrl_2: pinctrl@14000000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <0 46 0>;
+		};
 
-	pinctrl_4: pinctrl@03860000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
+		pinctrl_3: pinctrl@14010000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14010000 0x1000>;
+			interrupts = <0 50 0>;
+		};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		adma: adma@03880000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x03880000 0x1000>;
-			interrupts = <0 110 0>;
-			clocks = <&clock_audss EXYNOS_ADMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
-		};
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
-			status = "disabled";
+		pinctrl_4: pinctrl@03860000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 0>;
 		};
-	};
 
-	i2s0: i2s@03830000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x03830000 0x100>;
-		dmas = <&adma 0
-			&adma 2
-			&adma 1>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk0";
-		#sound-dai-cells = <1>;
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-		status = "disabled";
-	};
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges;
+
+			adma: adma@03880000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x03880000 0x1000>;
+				interrupts = <0 110 0>;
+				clocks = <&clock_audss EXYNOS_ADMA>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <6>;
+				#dma-requests = <16>;
+			};
+
+			pdma0: pdma@121A0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <0 34 0>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@121B0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <0 35 0>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			mdma0: mdma@10800000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10800000 0x1000>;
+				interrupts = <0 33 0>;
+				clocks = <&clock CLK_MDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+
+			mdma1: mdma@11C10000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11C10000 0x1000>;
+				interrupts = <0 124 0>;
+				clocks = <&clock CLK_MDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+				/*
+				 * MDMA1 can support both secure and non-secure
+				 * AXI transactions. When this is enabled in
+				 * the kernel for boards that run in secure
+				 * mode, we are getting imprecise external
+				 * aborts causing the kernel to oops.
+				 */
+				status = "disabled";
+			};
+		};
 
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk1";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-		status = "disabled";
-	};
+		i2s0: i2s@03830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&adma 0
+				&adma 2
+				&adma 1>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			status = "disabled";
+		};
 
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk2";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-		status = "disabled";
-	};
+		i2s1: i2s@12D60000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12
+				&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk1";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			status = "disabled";
+		};
 
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
+		i2s2: i2s@12D70000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12
+				&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk2";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			status = "disabled";
+		};
 
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 69 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d20000 0x100>;
+			interrupts = <0 68 0>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 70 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d30000 0x100>;
+			interrupts = <0 69 0>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	dp_phy: dp-video-phy {
-		compatible = "samsung,exynos5420-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d40000 0x100>;
+			interrupts = <0 70 0>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	mipi_phy: mipi-video-phy {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
+		dp_phy: dp-video-phy {
+			compatible = "samsung,exynos5420-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+		};
 
-	dsi@14500000 {
-		compatible = "samsung,exynos5410-mipi-dsi";
-		reg = <0x14500000 0x10000>;
-		interrupts = <0 82 0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-		clock-names = "bus_clk", "pll_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
+		mipi_phy: mipi-video-phy {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
 
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		dsi@14500000 {
+			compatible = "samsung,exynos5410-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <0 82 0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		adc: adc@12D10000 {
+			compatible = "samsung,exynos-adc-v2";
+			reg = <0x12D10000 0x100>;
+			interrupts = <0 106 0>;
+			clocks = <&clock CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_0: i2c@12C60000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C60000 0x100>;
+			interrupts = <0 56 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_1: i2c@12C70000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C70000 0x100>;
+			interrupts = <0 57 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_2: i2c@12C80000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C80000 0x100>;
+			interrupts = <0 58 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	hsi2c_4: i2c@12CA0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x1000>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_USI0>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		i2c_3: i2c@12C90000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C90000 0x100>;
+			interrupts = <0 59 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
 
-	hsi2c_5: i2c@12CB0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x1000>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_USI1>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_4: i2c@12CA0000 {
+			compatible = "samsung,exynos5-hsi2c";
+			reg = <0x12CA0000 0x1000>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_hs_bus>;
+			clocks = <&clock CLK_USI0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_6: i2c@12CC0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x1000>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_USI2>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_5: i2c@12CB0000 {
+			compatible = "samsung,exynos5-hsi2c";
+			reg = <0x12CB0000 0x1000>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_hs_bus>;
+			clocks = <&clock CLK_USI1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_7: i2c@12CD0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x1000>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_USI3>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_6: i2c@12CC0000 {
+			compatible = "samsung,exynos5-hsi2c";
+			reg = <0x12CC0000 0x1000>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_hs_bus>;
+			clocks = <&clock CLK_USI2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_8: i2c@12E00000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x1000>;
-		interrupts = <0 87 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_USI4>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_7: i2c@12CD0000 {
+			compatible = "samsung,exynos5-hsi2c";
+			reg = <0x12CD0000 0x1000>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_hs_bus>;
+			clocks = <&clock CLK_USI3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_9: i2c@12E10000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x1000>;
-		interrupts = <0 88 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_USI5>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_8: i2c@12E00000 {
+			compatible = "samsung,exynos5-hsi2c";
+			reg = <0x12E00000 0x1000>;
+			interrupts = <0 87 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_hs_bus>;
+			clocks = <&clock CLK_USI4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_10: i2c@12E20000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x1000>;
-		interrupts = <0 203 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_USI6>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_9: i2c@12E10000 {
+			compatible = "samsung,exynos5-hsi2c";
+			reg = <0x12E10000 0x1000>;
+			interrupts = <0 88 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c9_hs_bus>;
+			clocks = <&clock CLK_USI5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos5420-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-			"sclk_hdmiphy", "mout_hdmi";
-		phy = <&hdmiphy>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-		power-domains = <&disp_pd>;
-	};
+		hsi2c_10: i2c@12E20000 {
+			compatible = "samsung,exynos5-hsi2c";
+			reg = <0x12E20000 0x1000>;
+			interrupts = <0 203 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c10_hs_bus>;
+			clocks = <&clock CLK_USI6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hdmiphy: hdmiphy@145D0000 {
-		reg = <0x145D0000 0x20>;
-	};
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos5420-hdmi";
+			reg = <0x14530000 0x70000>;
+			interrupts = <0 95 0>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "mout_hdmi";
+			phy = <&hdmiphy>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+			power-domains = <&disp_pd>;
+		};
 
-	mixer: mixer@14450000 {
-		compatible = "samsung,exynos5420-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		power-domains = <&disp_pd>;
-		iommus = <&sysmmu_tv>;
-	};
+		hdmiphy: hdmiphy@145D0000 {
+			reg = <0x145D0000 0x20>;
+		};
 
-	rotator: rotator@11C00000 {
-		compatible = "samsung,exynos5250-rotator";
-		reg = <0x11C00000 0x64>;
-		interrupts = <0 84 0>;
-		clocks = <&clock CLK_ROTATOR>;
-		clock-names = "rotator";
-		iommus = <&sysmmu_rotator>;
-	};
+		mixer: mixer@14450000 {
+			compatible = "samsung,exynos5420-mixer";
+			reg = <0x14450000 0x10000>;
+			interrupts = <0 94 0>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			power-domains = <&disp_pd>;
+			iommus = <&sysmmu_tv>;
+		};
 
-	gsc_0: video-scaler@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl0>;
-	};
+		rotator: rotator@11C00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <0 84 0>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	gsc_1: video-scaler@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl1>;
-	};
+		gsc_0: video-scaler@13e00000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <0 85 0>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl0>;
+		};
 
-	jpeg_0: jpeg@11F50000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F50000 0x1000>;
-		interrupts = <0 89 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG>;
-		iommus = <&sysmmu_jpeg0>;
-	};
+		gsc_1: video-scaler@13e10000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <0 86 0>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl1>;
+		};
 
-	jpeg_1: jpeg@11F60000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F60000 0x1000>;
-		interrupts = <0 168 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG2>;
-		iommus = <&sysmmu_jpeg1>;
-	};
+		jpeg_0: jpeg@11F50000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F50000 0x1000>;
+			interrupts = <0 89 0>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG>;
+			iommus = <&sysmmu_jpeg0>;
+		};
 
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5420-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+		jpeg_1: jpeg@11F60000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F60000 0x1000>;
+			interrupts = <0 168 0>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG2>;
+			iommus = <&sysmmu_jpeg1>;
+		};
 
-	tmu_cpu0: tmu@10060000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5420-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
 
-	tmu_cpu1: tmu@10064000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10064000 0x100>;
-		interrupts = <0 183 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <0 65 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <0 183 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+			interrupts = <0 184 0>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+			interrupts = <0 185 0>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
+		tmu_gpu: tmu@100a0000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+			interrupts = <0 215 0>;
+			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		watchdog: watchdog@101D0000 {
+			compatible = "samsung,exynos5420-wdt";
+			reg = <0x101D0000 0x100>;
+			interrupts = <0 42 0>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
 		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		sss: sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <0 112 0>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
 		};
-		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&clock CLK_USBD300>;
+			clock-names = "usbdrd30";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3@12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
 		};
-		gpu_thermal: gpu-thermal {
-		       thermal-sensors = <&tmu_gpu>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
 		};
-	};
 
-        watchdog: watchdog@101D0000 {
-		compatible = "samsung,exynos5420-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-        };
-
-	sss: sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x300>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&clock CLK_USBD301>;
+			clock-names = "usbdrd30";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3@12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				interrupts = <0 73 0>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
 
-	usbdrd3_0: usb3-0 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD300>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_0: dwc3@12000000 {
-			compatible = "snps,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
 		};
-	};
 
-	usbdrd_phy0: phy@12100000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
 
-	usbdrd3_1: usb3-1 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD301>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_1: dwc3@12400000 {
-			compatible = "snps,dwc3";
-			reg = <0x12400000 0x10000>;
-			interrupts = <0 73 0>;
-			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+			clocks = <&clock CLK_USBH20>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
 		};
-	};
 
-	usbdrd_phy1: phy@12500000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12500000 0x100>;
-		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usbhost2: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
 
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+			clocks = <&clock CLK_USBH20>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
 		};
-	};
 
-	usbhost1: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
 		};
-	};
 
-	usb2_phy: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
+		sysmmu_g2dr: sysmmu@0x10A60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_g2dr: sysmmu@0x10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_g2dw: sysmmu@0x10A70000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A70000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_g2dw: sysmmu@0x10A70000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A70000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_tv: sysmmu@0x14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_tv: sysmmu@0x14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gscl0: sysmmu@0x13E80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gscl0: sysmmu@0x13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gscl1: sysmmu@0x13E90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gscl1: sysmmu@0x13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler0r: sysmmu@0x12880000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12880000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler0r: sysmmu@0x12880000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12880000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler1r: sysmmu@0x12890000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12890000 0x1000>;
+			interrupts = <0 186 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler1r: sysmmu@0x12890000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12890000 0x1000>;
-		interrupts = <0 186 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler2r: sysmmu@0x128A0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128A0000 0x1000>;
+			interrupts = <0 188 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler2r: sysmmu@0x128A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128A0000 0x1000>;
-		interrupts = <0 188 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler0w: sysmmu@0x128C0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <27 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler0w: sysmmu@0x128C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <27 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler1w: sysmmu@0x128D0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler1w: sysmmu@0x128D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler2w: sysmmu@0x128E0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <19 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler2w: sysmmu@0x128E0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <19 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_rotator: sysmmu@0x11D40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_rotator: sysmmu@0x11D40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11D40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg0: sysmmu@0x11F10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F10000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg0: sysmmu@0x11F10000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F10000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg1: sysmmu@0x11F20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupts = <0 169 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg1: sysmmu@0x11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupts = <0 169 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_l: sysmmu@0x11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_l: sysmmu@0x11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_r: sysmmu@0x11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_r: sysmmu@0x11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimd1_0: sysmmu@0x14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimd1_0: sysmmu@0x14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
+		sysmmu_fimd1_1: sysmmu@0x14680000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14680000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 	};
 
-	sysmmu_fimd1_1: sysmmu@0x14680000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14680000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		gpu_thermal: gpu-thermal {
+		       thermal-sensors = <&tmu_gpu>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
 	};
 };
 
-- 
2.5.0

[PATCH v2 17/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi

[Krzysztof Kozlowski]

The exynos5.dtsi is used for common nodes shared between Exynos5250 and
Exynos542x. Since Exynos5410 is very similar to Exynos5420 it can
include the common file as well to remove duplication and make
everything more consistent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts |   6 +-
 arch/arm/boot/dts/exynos5410.dtsi         | 103 ++++++++++--------------------
 2 files changed, 35 insertions(+), 74 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 377a679b454b..501f776f327d 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -102,14 +102,14 @@
 	};
 };
 
-&uart0 {
+&serial_0 {
 	status = "okay";
 };
 
-&uart1 {
+&serial_1 {
 	status = "okay";
 };
 
-&uart2 {
+&serial_2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 58d3844ef923..c0540eb76271 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos5.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
@@ -26,9 +27,6 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
 	};
 
 	cpus {
@@ -70,49 +68,6 @@
 		#size-cells = <1>;
 		ranges;
 
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sromc: memory-controller@12250000 {
-			compatible = "samsung,exynos4210-srom";
-			reg = <0x12250000 0x14>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x04000000 0x20000
-				  1 0 0x05000000 0x20000
-				  2 0 0x06000000 0x20000
-				  3 0 0x07000000 0x20000>;
-		};
-
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
@@ -236,34 +191,40 @@
 			reg = <0x03860000 0x1000>;
 			interrupts = <0 47 0>;
 		};
+	};
+};
 
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
 
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
 
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-	};
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	status = "disabled";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
 };
 
 #include "exynos5410-pinctrl.dtsi"
-- 
2.5.0

[PATCH v2 18/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Krzysztof Kozlowski]

Just like other Exynos5 family SoCs, this one has four UARTs. Configure
clocks for UART3 and enable it.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index c0540eb76271..62dc3b4aef93 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -215,7 +215,8 @@
 };
 
 &serial_3 {
-	status = "disabled";
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
 };
 
 &sromc {
-- 
2.5.0

[PATCH v2 19/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap

[Krzysztof Kozlowski]

Multi-Core Timer generates interrupts but it is not really an interrupt
controller so remove the "interrupt-controller" and "interrupt-cells"
properties. Additionally extend the length of mapped memory to cover all
registers (last SFR is at 0x0A40).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5420.dtsi | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 3114cd6fb5d1..ac39e3b8b0e1 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -267,9 +267,7 @@
 
 		mct: mct@101C0000 {
 			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
+			reg = <0x101C0000 0xB00>;
 			interrupt-parent = <&mct_map>;
 			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
 					<8>, <9>, <10>, <11>;
-- 
2.5.0

[PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI

[Krzysztof Kozlowski]

The Exynos5410/542x/5800 are very similar designs. Create new new
DTSI with common nodes to remove DTS duplication. Although currently
only MCT and SysRAM are shared but in future more nodes will be added to
common file.

The patch should not have functional impact.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410.dtsi | 55 ++++---------------------------
 arch/arm/boot/dts/exynos5420.dtsi | 54 ++++---------------------------
 arch/arm/boot/dts/exynos54xx.dtsi | 68 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+), 97 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos54xx.dtsi

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 62dc3b4aef93..850343d3c2af 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -13,8 +13,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
-#include "exynos5.dtsi"
+#include "exynos54xx.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
@@ -73,53 +72,6 @@
 			reg = <0x10040000 0x5000>;
 		};
 
-		mct: mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&interrupt_map>;
-			interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			interrupt_map: interrupt-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
-		};
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
 		clock: clock-controller@10010000 {
 			compatible = "samsung,exynos5410-clock";
 			reg = <0x10010000 0x30000>;
@@ -194,6 +146,11 @@
 	};
 };
 
+&mct {
+	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
 &pwm {
 	clocks = <&clock CLK_PWM>;
 	clock-names = "timers";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index ac39e3b8b0e1..750571f838f2 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -13,9 +13,8 @@
  * published by the Free Software Foundation.
  */
 
+#include "exynos54xx.dtsi"
 #include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
@@ -185,24 +184,6 @@
 			};
 		};
 
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
 		clock: clock-controller@10010000 {
 			compatible = "samsung,exynos5420-clock";
 			reg = <0x10010000 0x30000>;
@@ -265,34 +246,6 @@
 			status = "disabled";
 		};
 
-		mct: mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-					<8>, <9>, <10>, <11>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
-		};
-
 		gsc_pd: power-domain@10044000 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10044000 0x20>;
@@ -1194,6 +1147,11 @@
 	iommu-names = "m0", "m1";
 };
 
+&mct {
+	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
 &pwm {
 	clocks = <&clock CLK_PWM>;
 	clock-names = "timers";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
new file mode 100644
index 000000000000..9ce625bd79c1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Samsung's Exynos54xx SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
+ * Exynos 54xx SoCs should include this file and customize it further
+ * (e.g. with clocks).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "exynos5.dtsi"
+
+/ {
+	compatible = "samsung,exynos5";
+
+	soc: soc {
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		mct: mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0xB00>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+					<8>, <9>, <10>, <11>;
+
+			mct_map: mct-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 0>,
+						<5 &gic 0 121 0>,
+						<6 &gic 0 122 0>,
+						<7 &gic 0 123 0>,
+						<8 &gic 0 128 0>,
+						<9 &gic 0 129 0>,
+						<10 &gic 0 130 0>,
+						<11 &gic 0 131 0>;
+			};
+		};
+	};
+};
-- 
2.5.0

[PATCH v2 21/22] ARM: dts: exynos: Add USB to Exynos5410

[Krzysztof Kozlowski]

Move USB 3.0 DWC and 2.0 EHCI/OHCI nodes from exynos5420.dtsi to
exynos54xx.dtsi common for entire family. For Exynos542x/5800 this
should not have functional impact but for Exynos5410 this effectively
adds USB support.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

TODO: lack of regulator causes errors:
	usb usb4-port1: over-current condition
?
---
 arch/arm/boot/dts/exynos5410.dtsi |  39 ++++++++++++
 arch/arm/boot/dts/exynos5420.dtsi | 131 ++++++++++++--------------------------
 arch/arm/boot/dts/exynos54xx.dtsi |  74 +++++++++++++++++++++
 3 files changed, 152 insertions(+), 92 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 850343d3c2af..dd4d6d752865 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -185,4 +185,43 @@
 		  3 0 0x07000000 0x20000>;
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5410-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 750571f838f2..ebf1dbec5070 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -829,98 +829,6 @@
 			clock-names = "secss";
 		};
 
-		usbdrd3_0: usb3-0 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD300>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_0: dwc3@12000000 {
-				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 0>;
-				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy0: phy@12100000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbdrd3_1: usb3-1 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD301>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_1: dwc3@12400000 {
-				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
-				interrupts = <0 73 0>;
-				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy1: phy@12500000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12500000 0x100>;
-			clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbhost2: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usbhost1: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usb2_phy: phy@12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-		};
-
 		sysmmu_g2dr: sysmmu@0x10A60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x10A60000 0x1000>;
@@ -1184,4 +1092,43 @@
 	clock-names = "uart", "clk_uart_baud0";
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9ce625bd79c1..0f3b8735849e 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -64,5 +64,79 @@
 						<11 &gic 0 131 0>;
 			};
 		};
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3@12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3@12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				interrupts = <0 73 0>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
 	};
 };
-- 
2.5.0

[PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board

[Krzysztof Kozlowski]

The Hardkernel's Odroid XU board was first design with big.LITTLE SoC
from Samsung: the Exynos5410. Comparing now to more popular Odroid XU3
the differences are:
1. Exynos5410 instead of 5422,
2. DisplayPort,
3. Main PMIC: Maxim 77802 instead of S2MPS11,
4. USB3503+LAN9730 instead of integrated LAN9514,
5. eMMC 4.5 instead of eMMC 5.0,

This patch adds initial support for the XU board with working basic
functions, eMMC/SD and USB (including attached ethernet adapter).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../bindings/arm/samsung/samsung-boards.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos5410-odroidxu.dts          | 166 +++++++++++++++++++++
 3 files changed, 168 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index f5deace2b380..0ea7f14ef294 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -47,6 +47,7 @@ Required root node properties:
 	- "hardkernel,odroid-u3"  - for Exynos4412-based Hardkernel Odroid U3.
 	- "hardkernel,odroid-x"   - for Exynos4412-based Hardkernel Odroid X.
 	- "hardkernel,odroid-x2"  - for Exynos4412-based Hardkernel Odroid X2.
+	- "hardkernel,odroid-xu"  - for Exynos5410-based Hardkernel Odroid XU.
 	- "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
 	- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
 					 Odroid XU3 Lite board.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5aeb10674370..9ed1c7abedb1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -134,6 +134,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5250-snow-rev5.dtb \
 	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000000..b0cbd53aeea9
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,166 @@
+/*
+ * Hardkernel Odroid XU3 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x7EA00000>;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	/* TODO: these will be the same as in XU3-common file */
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+};
+
+/* TODO:
+&i2c_4 {
+	status = "okay";
+
+	ina231@40 {
+		compatible = "ti,ina231";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	ina231@41 {
+		compatible = "ti,ina231";
+		reg = <0x41>;
+		shunt-resistor = <10000>;
+	};
+
+	ina231@44 {
+		compatible = "ti,ina231";
+		reg = <0x44>;
+		shunt-resistor = <10000>;
+	};
+
+	ina231@45 {
+		compatible = "ti,ina231";
+		reg = <0x45>;
+		shunt-resistor = <10000>;
+	};
+};
+*/
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	//vmmc-supply = <&ldo18_reg>; // FIXME
+	//vqmmc-supply = <&ldo3_reg>; // FIXME
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	//vmmc-supply = <&ldo19_reg>; // FIXME
+	//vqmmc-supply = <&ldo13_reg>; // Thats gonna be different than XU3 // FIXME
+};
+
+&pinctrl_0 {
+	emmc_nrst_pin: emmc-nrst {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+//	vdd33-supply = <&ldo9_reg>;
+//	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+//	vdd33-supply = <&ldo9_reg>;
+//	vdd10-supply = <&ldo11_reg>;
+};
-- 
2.5.0

Re: [PATCH v2 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Add license and copyrights (file introduced in 2014) to header with
> Exynos5410 clock IDs. Additionally reformat it to improve readability.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Add IDs for PWM and USB clocks to Exynos5410. Use the same number as for
> Exynos5420 just in case in future these drivers were merged.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> For consistency between Exynos5410 and Exynos542x/5800 switch to similar
> way of defining fin_pll/oscclk. Add a node early, before implementing
> this in driver to preserve bisectability.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board

[Rob Herring]

On Sun, May 08, 2016 at 09:06:07PM +0200, Krzysztof Kozlowski wrote:
> The Hardkernel's Odroid XU board was first design with big.LITTLE SoC
> from Samsung: the Exynos5410. Comparing now to more popular Odroid XU3
> the differences are:
> 1. Exynos5410 instead of 5422,
> 2. DisplayPort,
> 3. Main PMIC: Maxim 77802 instead of S2MPS11,
> 4. USB3503+LAN9730 instead of integrated LAN9514,
> 5. eMMC 4.5 instead of eMMC 5.0,
> 
> This patch adds initial support for the XU board with working basic
> functions, eMMC/SD and USB (including attached ethernet adapter).
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  .../bindings/arm/samsung/samsung-boards.txt        |   1 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/exynos5410-odroidxu.dts          | 166 +++++++++++++++++++++
>  3 files changed, 168 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index f5deace2b380..0ea7f14ef294 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -47,6 +47,7 @@ Required root node properties:
>  	- "hardkernel,odroid-u3"  - for Exynos4412-based Hardkernel Odroid U3.
>  	- "hardkernel,odroid-x"   - for Exynos4412-based Hardkernel Odroid X.
>  	- "hardkernel,odroid-x2"  - for Exynos4412-based Hardkernel Odroid X2.
> +	- "hardkernel,odroid-xu"  - for Exynos5410-based Hardkernel Odroid XU.
>  	- "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
>  	- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
>  					 Odroid XU3 Lite board.
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5aeb10674370..9ed1c7abedb1 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -134,6 +134,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
>  	exynos5250-snow-rev5.dtb \
>  	exynos5250-spring.dtb \
>  	exynos5260-xyref5260.dtb \
> +	exynos5410-odroidxu.dtb \
>  	exynos5410-smdk5410.dtb \
>  	exynos5420-arndale-octa.dtb \
>  	exynos5420-peach-pit.dtb \
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> new file mode 100644
> index 000000000000..b0cbd53aeea9
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -0,0 +1,166 @@
> +/*
> + * Hardkernel Odroid XU3 board device tree source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + * Copyright (c) 2016 Krzysztof Kozlowski
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5410.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include "exynos54xx-odroidxu-leds.dtsi"
> +
> +/ {
> +	model = "Hardkernel Odroid XU";
> +	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
> +
> +	memory {
> +		reg = <0x40000000 0x7EA00000>;

lowercase hex please.

With that,

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Just like clock driver for Exynos542x/5800, provide the fixed clock here
> so the clock bindings and their consumers would be consistent and
> similar.
> 
> However a clock named "fin_pll" is already provided by generic
> fixed-clock and it is both referenced in the clock driver (by name) and
> in DT (by phandle). To make the transition smooth, first introduce the
> new external fixed clock here under temporary, different name and switch
> internal users to it.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

[snip]

>  
> +/* Same as in Exynos5420 */
> +static const struct of_device_id ext_clk_match[] __initconst = {
> +	{ .compatible = "samsung,exynos5420-oscclk", .data = (void *)0, },

Since using designated initializers, I was about to say that there is no need
to explicitly set .data to 0 since omitted fields are implicitly initialized...

> +	{ },
> +};
> +
>  /* register exynos5410 clocks */
>  static void __init exynos5410_clk_init(struct device_node *np)
>  {
> @@ -192,6 +204,10 @@ static void __init exynos5410_clk_init(struct device_node *np)
>  
>  	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
>  
> +	samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
> +			ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
> +			ext_clk_match);
> +

... but then I noticed that .data is used as exynos5x_fixed_rate_ext_clks
array index in samsung_clk_of_register_fixed_ext(). So makes sense to set
it explicitly to make the intent clear.

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> The clk-exynos5410 driver now provides the "fin_pll" external fixed
> clock. Switch the Multi-Core Timer to this clock.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> All "fin_pll" clock users are switched to the new one, provided by

s/are switched/were switched

> Exynos5410 clock driver. Remove old DT node.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 07/22] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> For smooth transition of fin_pll to clk-exynos5410.c from fixed-clock
> driver, initially it was named "fin_pll_new". Fix this here.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 08/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Just like other Exynos5 family SoCs, this one has four UARTs. Add
> missing UART3 clocks to the Exynso5410 clock driver.
> 
> Add clocks for USB and PWM.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

I don't have an Exynos5410 SoC user manual to double check all values
but assuming that are correct, the patch looks good to me.

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
 
Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 09/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> The 'sd0_rclk' was put in the middle of SD1 nodes. Remove the confusion.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 10/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Fro consistency lowercase node labels are used.
>

s/Fro/For
 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 11/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Configure the pinctrl for MMC0 (eMMC) and MMC2 (microSD card).
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 12/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> The LED nodes can be shared between Odroid XU3, XU3-Lite and XU (not yet
> added) thus removing duplication.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Exynos5420 and Exynos5250 share some nodes: the PWM and syscon
> (sysreg_system_controller). Move them to parent DTSI to avoid
> duplication.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

I see that the i2c_[0-3] nodes are also the same in both DTSI. Do you
think that makes sense to also move those to exynos5.dtsi as well?

In any case that can be made as a follow-up, so:

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 14/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> Add 'sromc' label to SROM memory controller in common exynos5.dtsi so it
> can be referenced by inheriting DTSI.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 15/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> The i2c-arbitrator node in exynos5250-snow-common used absolute path to
> reference other node (the i2c parent). Use phandle instead, because the
> depth of the other node may be changed (like moving it under 'soc'
> node).
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 16/22] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> The conventions it to put SoC devices under 'soc' node. In fact other

s/it/is

> our DTSes (like exynos3250.dtsi or exynos5410.dtsi) already follows it.
> Adjust exynos5250 and exynos5420 DTSI to follow this convention. This is
> also necessary for the upcoming change in exynos5410.dtsi to inherit
> from common exynos5.dtsi.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 17/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> The exynos5.dtsi is used for common nodes shared between Exynos5250 and
> Exynos542x. Since Exynos5410 is very similar to Exynos5420 it can
> include the common file as well to remove duplication and make
> everything more consistent.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 18/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> Just like other Exynos5 family SoCs, this one has four UARTs. Configure
> clocks for UART3 and enable it.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 19/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> Multi-Core Timer generates interrupts but it is not really an interrupt
> controller so remove the "interrupt-controller" and "interrupt-cells"
> properties. Additionally extend the length of mapped memory to cover all
> registers (last SFR is at 0x0A40).
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> The Exynos5410/542x/5800 are very similar designs. Create new new

s/new new/a new

> DTSI with common nodes to remove DTS duplication. Although currently
> only MCT and SysRAM are shared but in future more nodes will be added to
> common file.
> 
> The patch should not have functional impact.
> 

A nice way to check this is to diff the disassembled compiled DTBs with
and without the patch and making sure that the resulted DTS is the same.

> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
 
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 21/22] ARM: dts: exynos: Add USB to Exynos5410

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> Move USB 3.0 DWC and 2.0 EHCI/OHCI nodes from exynos5420.dtsi to
> exynos54xx.dtsi common for entire family. For Exynos542x/5800 this
> should not have functional impact but for Exynos5410 this effectively
> adds USB support.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Stephen Boyd]

On 05/08, Krzysztof Kozlowski wrote:
> 
> Hi,
> 
> Patchset adds necessary clocks, reorganizes existing stuff and finally
> adds Odroid XU support.
> 
> Merging strategy
> ================
> Complicated! The clock dt-bindings and driver changes can go to clock
> tree. However there are three DTS patches in the middle.
> a. This has to go in before adding "fin_pll_new" to clock driver:
>    - [PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver
> 
> b. This should go in before renaming "fin_pll_new" back to original name:
>    - [PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock
>    - [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410
> 
> The order of patches in the patchset is really how it should go in
> to reduce any bisectability glitches.

If you want to just merge them through arm-soc then feel free to
add my Acked-by to the clk driver and clock dt-binding ones.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
> The Hardkernel's Odroid XU board was first design with big.LITTLE SoC
> from Samsung: the Exynos5410. Comparing now to more popular Odroid XU3
> the differences are:
> 1. Exynos5410 instead of 5422,
> 2. DisplayPort,
> 3. Main PMIC: Maxim 77802 instead of S2MPS11,
> 4. USB3503+LAN9730 instead of integrated LAN9514,
> 5. eMMC 4.5 instead of eMMC 5.0,
> 
> This patch adds initial support for the XU board with working basic
> functions, eMMC/SD and USB (including attached ethernet adapter).
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

This DTS has some TODO's, FIXME's and commented input supplies. Probably
this patch should had been an RFC? or you should mention about these in
the commit message to understand why are there.

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
> 
> Hi,
> 
> Patchset adds necessary clocks, reorganizes existing stuff and finally
> adds Odroid XU support.
> 

Do you have a branch available so I can pull these patches and test in
the Exynos5 boards I've access to?

Thanks a lot and best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Krzysztof Kozlowski]

On 05/10/2016 12:05 AM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
>>
>> Hi,
>>
>> Patchset adds necessary clocks, reorganizes existing stuff and finally
>> adds Odroid XU support.
>>
> 
> Do you have a branch available so I can pull these patches and test in
> the Exynos5 boards I've access to?

Of course. It sits on my private repo, on Github:
https://github.com/krzk/linux
branch: for-next/odroid-xu-v2

Best regards,
Krzysztof

Re: [PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock

[Krzysztof Kozlowski]

On 05/09/2016 10:19 PM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
>> Just like clock driver for Exynos542x/5800, provide the fixed clock here
>> so the clock bindings and their consumers would be consistent and
>> similar.
>>
>> However a clock named "fin_pll" is already provided by generic
>> fixed-clock and it is both referenced in the clock driver (by name) and
>> in DT (by phandle). To make the transition smooth, first introduce the
>> new external fixed clock here under temporary, different name and switch
>> internal users to it.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>> ---
> 
> [snip]
> 
>>  
>> +/* Same as in Exynos5420 */
>> +static const struct of_device_id ext_clk_match[] __initconst = {
>> +	{ .compatible = "samsung,exynos5420-oscclk", .data = (void *)0, },
> 
> Since using designated initializers, I was about to say that there is no need
> to explicitly set .data to 0 since omitted fields are implicitly initialized...
> 
>> +	{ },
>> +};
>> +
>>  /* register exynos5410 clocks */
>>  static void __init exynos5410_clk_init(struct device_node *np)
>>  {
>> @@ -192,6 +204,10 @@ static void __init exynos5410_clk_init(struct device_node *np)
>>  
>>  	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
>>  
>> +	samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
>> +			ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
>> +			ext_clk_match);
>> +
> 
> ... but then I noticed that .data is used as exynos5x_fixed_rate_ext_clks
> array index in samsung_clk_of_register_fixed_ext(). So makes sense to set
> it explicitly to make the intent clear.

Yes, that is the intention here. The '(void *)0' is a hint that clock
needs frequency from DT.

Thanks for review,
Krzysztof

Re: [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410

[Krzysztof Kozlowski]

On 05/09/2016 10:24 PM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
>> All "fin_pll" clock users are switched to the new one, provided by
> 
> s/are switched/were switched

Thanks for spotting this,
Krzysztof

Re: [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi

[Krzysztof Kozlowski]

On 05/09/2016 11:25 PM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
>> Exynos5420 and Exynos5250 share some nodes: the PWM and syscon
>> (sysreg_system_controller). Move them to parent DTSI to avoid
>> duplication.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>> ---
> 
> I see that the i2c_[0-3] nodes are also the same in both DTSI. Do you
> think that makes sense to also move those to exynos5.dtsi as well?

Thanks, that is a good suggestion. I didn't add the I2C and its children
to Odroid XU yet but probably having the nodes defined won't hurt.
Especially that they are disabled by default.

Best regards,
Krzysztof

> In any case that can be made as a follow-up, so:
> 
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> 
> Best regards,
> 

Re: [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI

[Krzysztof Kozlowski]

On 05/09/2016 11:53 PM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
>> The Exynos5410/542x/5800 are very similar designs. Create new new
> 
> s/new new/a new
> 
>> DTSI with common nodes to remove DTS duplication. Although currently
>> only MCT and SysRAM are shared but in future more nodes will be added to
>> common file.
>>
>> The patch should not have functional impact.
>>
> 
> A nice way to check this is to diff the disassembled compiled DTBs with
> and without the patch and making sure that the resulted DTS is the same.

Yes, that is what I've done. Recently there is a tool making that even
easier: dtx_diff.

Best regards,
Krzysztof

Re: [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board

[Krzysztof Kozlowski]

On 05/10/2016 12:02 AM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
>> The Hardkernel's Odroid XU board was first design with big.LITTLE SoC
>> from Samsung: the Exynos5410. Comparing now to more popular Odroid XU3
>> the differences are:
>> 1. Exynos5410 instead of 5422,
>> 2. DisplayPort,
>> 3. Main PMIC: Maxim 77802 instead of S2MPS11,
>> 4. USB3503+LAN9730 instead of integrated LAN9514,
>> 5. eMMC 4.5 instead of eMMC 5.0,
>>
>> This patch adds initial support for the XU board with working basic
>> functions, eMMC/SD and USB (including attached ethernet adapter).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>> ---
> 
> This DTS has some TODO's, FIXME's and commented input supplies. Probably
> this patch should had been an RFC? or you should mention about these in
> the commit message to understand why are there.

I have to clean it up or fix these notes. Actually I was quite surprised
that board worked fine with this basic setup.

Best regards,
Krzysztof

Re: [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/10/2016 01:33 AM, Krzysztof Kozlowski wrote:
> On 05/09/2016 11:53 PM, Javier Martinez Canillas wrote:
>> Hello Krzysztof,
>>
>> On 05/08/2016 03:06 PM, Krzysztof Kozlowski wrote:
>>> The Exynos5410/542x/5800 are very similar designs. Create new new
>>
>> s/new new/a new
>>
>>> DTSI with common nodes to remove DTS duplication. Although currently
>>> only MCT and SysRAM are shared but in future more nodes will be added to
>>> common file.
>>>
>>> The patch should not have functional impact.
>>>
>>
>> A nice way to check this is to diff the disassembled compiled DTBs with
>> and without the patch and making sure that the resulted DTS is the same.
> 
> Yes, that is what I've done. Recently there is a tool making that even
> easier: dtx_diff.
>

I didn't know we had such a tool in mainline now.
Very useful, thanks a lot for the information.
 
> Best regards,
> Krzysztof
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Javier Martinez Canillas]

Hello Krzysztof,

On 05/10/2016 01:13 AM, Krzysztof Kozlowski wrote:
> On 05/10/2016 12:05 AM, Javier Martinez Canillas wrote:
>> Hello Krzysztof,
>>
>> On 05/08/2016 03:05 PM, Krzysztof Kozlowski wrote:
>>>
>>> Hi,
>>>
>>> Patchset adds necessary clocks, reorganizes existing stuff and finally
>>> adds Odroid XU support.
>>>
>>
>> Do you have a branch available so I can pull these patches and test in
>> the Exynos5 boards I've access to?
> 
> Of course. It sits on my private repo, on Github:
> https://github.com/krzk/linux
> branch: for-next/odroid-xu-v2
>

Thanks for the information, I'll give a try today.
 
> Best regards,
> Krzysztof
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America