From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161450Ab3FUOBN (ORCPT ); Fri, 21 Jun 2013 10:01:13 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:41033 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030372Ab3FUOAw (ORCPT ); Fri, 21 Jun 2013 10:00:52 -0400 Message-ID: <51C45C7A.5000509@ti.com> Date: Fri, 21 Jun 2013 19:30:26 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130510 Thunderbird/17.0.6 MIME-Version: 1.0 To: Laxman Dewangan CC: "broonie@kernel.org" , "grant.likely@linaro.org" , "rob.herring@calxeda.com" , "rob@landley.net" , "lgirdwood@gmail.com" , Stephen Warren , "gg@slimlogic.co.uk" , "sameo@linux.intel.com" , "devicetree-discuss@lists.ozlabs.org" , "linux-doc@vger.kernel.org" , "linux-kernel@vger.kernel.org" Subject: Re: [PATCH 2/2] regulator: palmas: model SMPS10 as two regulators References: <1371717458-10307-1-git-send-email-kishon@ti.com> <1371717458-10307-3-git-send-email-kishon@ti.com> <51C2DEEB.9090600@nvidia.com> <51C3089F.5030003@ti.com> <51C30B95.4010406@nvidia.com> <51C30F60.3060100@ti.com> <51C31537.9030705@nvidia.com> <51C31F30.5000307@ti.com> <51C45448.4080201@nvidia.com> In-Reply-To: <51C45448.4080201@nvidia.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Friday 21 June 2013 06:55 PM, Laxman Dewangan wrote: > On Thursday 20 June 2013 08:56 PM, Kishon Vijay Abraham I wrote: >> Hi, >> >> On Thursday 20 June 2013 08:14 PM, Laxman Dewangan wrote: >>> >>> Have you added the regulator supply entries? >>> Are you testing on mainline linux-next? >> Not in linux-next :-( Tested only with mainline. >> Does inverting the order helps? >> > > I think because you do not have entry of supply in your dt node, it gets > ignored by regulator_dev_lookup() and continue. > > I made the entry like (added entry form smps10-out2-supply and smps10-in-supply > in dt node) and then it failed. > /*** > > + smps10-out2-supply = <&palmas_smps10_out2_reg>; > + smps10-in-supply = <&tps65090_dcdc3_reg>; > ldo3-in-supply = <&palmas_smps3_reg>; > @@ -903,6 +905,20 @@ > regulator-always-on; > }; > > + palmas_smps10_out1_reg: smps10_out1 { > + regulator-name = "smps10_out1"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + palmas_smps10_out2_reg: smps10_out2 { > + regulator-name = "smps10_out2"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > **/ > > > After reversing the sequence, it worked fine. You mean, changing the order in dt node helped? Thanks Kishon