linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/5] drm/panel/oneplus6: Add panel-oneplus6
       [not found] <20201007174736.292968-1-caleb@connolly.tech>
@ 2020-10-07 17:49 ` Caleb Connolly
  2020-10-18 13:35   ` Sam Ravnborg
  2020-10-07 17:49 ` [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel Caleb Connolly
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 17+ messages in thread
From: Caleb Connolly @ 2020-10-07 17:49 UTC (permalink / raw)
  To: linux-arm-msm, Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter
  Cc: ~postmarketos/upstreaming, Caleb Connolly, linux-kernel, dri-devel

This commit adds support for the display panels used in the OnePlus 6 /
T devices.

The OnePlus 6/T devices use different panels however they are
functionally identical with much of the commands being shared. The
panels don't appear to be used by any other devices some combine them as
one driver that is specific to the devices.

The panels are: samsung,sofef00
and             samsung,s6e3fc2x01

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 drivers/gpu/drm/panel/Kconfig          |  12 +
 drivers/gpu/drm/panel/Makefile         |   1 +
 drivers/gpu/drm/panel/panel-oneplus6.c | 418 +++++++++++++++++++++++++
 3 files changed, 431 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-oneplus6.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index de2f2a452be5..d72862265400 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -229,6 +229,18 @@ config DRM_PANEL_OLIMEX_LCD_OLINUXINO
 	  Say Y here if you want to enable support for Olimex Ltd.
 	  LCD-OLinuXino panel.
 
+config DRM_PANEL_ONEPLUS6
+	tristate "OnePlus 6/6T Samsung AMOLED DSI command mode panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y or M here if you want to enable support for the Samsung AMOLED
+	  command mode panels found in the OnePlus 6/6T smartphones.
+
+	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
+
 config DRM_PANEL_ORISETECH_OTM8009A
 	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index e45ceac6286f..017539056f53 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
 obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
+obj-$(CONFIG_DRM_PANEL_ONEPLUS6) += panel-oneplus6.o
 obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
 obj-$(CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS) += panel-osd-osd101t2587-53ts.o
 obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
diff --git a/drivers/gpu/drm/panel/panel-oneplus6.c b/drivers/gpu/drm/panel/panel-oneplus6.c
new file mode 100644
index 000000000000..5e212774b1e0
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-oneplus6.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2020 Caleb Connolly <caleb@connolly.tech>
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ *   Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ *
+ * Caleb Connolly <caleb@connolly.tech>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <linux/backlight.h>
+
+struct oneplus6_panel {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct backlight_device *backlight;
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *enable_gpio;
+	const struct drm_display_mode *mode;
+	bool prepared;
+	bool enabled;
+};
+
+static inline
+struct oneplus6_panel *to_oneplus6_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct oneplus6_panel, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, seq...) do {				\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+static void oneplus6_panel_reset(struct oneplus6_panel *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(5000, 6000);
+}
+
+static int oneplus6_panel_on(struct oneplus6_panel *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	usleep_range(10000, 11000);
+
+	dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
+
+	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set tear on: %d\n", ret);
+		return ret;
+	}
+
+	dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
+	dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
+	dsi_dcs_write_seq(dsi, 0xb0, 0x07);
+	dsi_dcs_write_seq(dsi, 0xb6, 0x12);
+	dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
+	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
+	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int oneplus6_panel_off(struct oneplus6_panel *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	msleep(40);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(160);
+
+	return 0;
+}
+
+static int oneplus6_panel_prepare(struct drm_panel *panel)
+{
+	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	oneplus6_panel_reset(ctx);
+
+	ret = oneplus6_panel_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+		return ret;
+	}
+
+	ctx->prepared = true;
+	return 0;
+}
+
+static int oneplus6_panel_unprepare(struct drm_panel *panel)
+{
+	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = regulator_enable(ctx->supply);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = oneplus6_panel_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	regulator_disable(ctx->supply);
+
+	ctx->prepared = false;
+	return 0;
+}
+
+
+static int oneplus6_panel_enable(struct drm_panel *panel)
+{
+	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
+	int ret;
+
+	if (ctx->enabled)
+		return 0;
+
+	ret = backlight_enable(ctx->backlight);
+	if (ret < 0) {
+		dev_err(&ctx->dsi->dev, "Failed to enable backlight: %d\n", ret);
+		return ret;
+	}
+
+	ctx->enabled = true;
+	return 0;
+}
+
+static int oneplus6_panel_disable(struct drm_panel *panel)
+{
+	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
+	int ret;
+
+	if (!ctx->enabled)
+		return 0;
+
+	ret = backlight_disable(ctx->backlight);
+	if (ret < 0) {
+		dev_err(&ctx->dsi->dev, "Failed to disable backlight: %d\n", ret);
+		return ret;
+	}
+
+	ctx->enabled = false;
+	return 0;
+}
+
+
+static const struct drm_display_mode enchilada_panel_mode = {
+	.clock = (1080 + 112 + 16 + 36) * (2280 + 36 + 8 + 12) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 112,
+	.hsync_end = 1080 + 112 + 16,
+	.htotal = 1080 + 112 + 16 + 36,
+	.vdisplay = 2280,
+	.vsync_start = 2280 + 36,
+	.vsync_end = 2280 + 36 + 8,
+	.vtotal = 2280 + 36 + 8 + 12,
+	.width_mm = 68,
+	.height_mm = 145,
+};
+
+static const struct drm_display_mode fajita_panel_mode = {
+	.clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 72,
+	.hsync_end = 1080 + 72 + 16,
+	.htotal = 1080 + 72 + 16 + 36,
+	.vdisplay = 2340,
+	.vsync_start = 2340 + 32,
+	.vsync_end = 2340 + 32 + 4,
+	.vtotal = 2340 + 32 + 4 + 18,
+	.width_mm = 68,
+	.height_mm = 145,
+};
+
+static int oneplus6_panel_get_modes(struct drm_panel *panel,
+						struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
+
+	mode = drm_mode_duplicate(connector->dev, ctx->mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs oneplus6_panel_panel_funcs = {
+	.disable = oneplus6_panel_disable,
+	.enable = oneplus6_panel_enable,
+	.prepare = oneplus6_panel_prepare,
+	.unprepare = oneplus6_panel_unprepare,
+	.get_modes = oneplus6_panel_get_modes,
+};
+
+static int oneplus6_panel_bl_get_brightness(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	int err;
+	u16 brightness = bl->props.brightness;
+
+	err = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
+	if (err < 0) {
+		return err;
+	}
+
+	return brightness & 0xff;
+}
+
+static int oneplus6_panel_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	int err;
+	unsigned short brightness;
+
+	// This panel needs the high and low bytes swapped for the brightness value
+	brightness = ((bl->props.brightness<<8)&0xff00)|((bl->props.brightness>>8)&0x00ff);
+
+	err = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
+	if (err < 0) {
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct backlight_ops oneplus6_panel_bl_ops = {
+	.update_status = oneplus6_panel_bl_update_status,
+	.get_brightness = oneplus6_panel_bl_get_brightness,
+};
+
+static struct backlight_device *
+oneplus6_panel_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct backlight_properties props = {
+		.type = BACKLIGHT_PLATFORM,
+		.scale = BACKLIGHT_SCALE_LINEAR,
+		.brightness = 255,
+		.max_brightness = 512,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+						  &oneplus6_panel_bl_ops, &props);
+}
+
+
+static int oneplus6_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct oneplus6_panel *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->mode = of_device_get_match_data(dev);
+
+	if (!ctx->mode) {
+		dev_err(dev, "Missing device mode\n");
+		return -ENODEV;
+	}
+
+	ctx->supply = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		dev_err(dev, "Failed to get vddio regulator: %d\n", ret);
+		return ret;
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio)) {
+		ret = PTR_ERR(ctx->reset_gpio);
+		dev_warn(dev, "Failed to get reset-gpios: %d\n", ret);
+		return ret;
+	}
+
+	ctx->backlight = oneplus6_panel_create_backlight(dsi);
+	if (IS_ERR(ctx->backlight)) {
+		ret = PTR_ERR(ctx->backlight);
+		dev_err(dev, "Failed to create backlight: %d\n", ret);
+		return ret;
+	}
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+
+	drm_panel_init(&ctx->panel, dev, &oneplus6_panel_panel_funcs,
+			   DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_add(&ctx->panel);
+	if (ret < 0) {
+		dev_err(dev, "Failed to add panel: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(dev, "Successfully added oneplus6 panel");
+
+	return 0;
+}
+
+static int oneplus6_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct oneplus6_panel *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id oneplus6_panel_of_match[] = {
+	{
+		.compatible = "samsung,sofef00",
+		.data = &enchilada_panel_mode,
+	},
+	{
+		.compatible = "samsung,s6e3fc2x01",
+		.data = &fajita_panel_mode,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, oneplus6_panel_of_match);
+
+static struct mipi_dsi_driver oneplus6_panel_driver = {
+	.probe = oneplus6_panel_probe,
+	.remove = oneplus6_panel_remove,
+	.driver = {
+		.name = "panel-oneplus6",
+		.of_match_table = oneplus6_panel_of_match,
+	},
+};
+
+module_mipi_dsi_driver(oneplus6_panel_driver);
+
+MODULE_AUTHOR("Caleb Connolly <caleb@connolly.tech>");
+MODULE_DESCRIPTION("DRM driver for Samsung AMOLED DSI panels found in OnePlus 6/6T phones");
+MODULE_LICENSE("GPL v2");
-- 
2.28.0



^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel
       [not found] <20201007174736.292968-1-caleb@connolly.tech>
  2020-10-07 17:49 ` [PATCH 1/5] drm/panel/oneplus6: Add panel-oneplus6 Caleb Connolly
@ 2020-10-07 17:49 ` Caleb Connolly
  2020-10-09 14:02   ` Rob Herring
  2020-10-09 14:05   ` Rob Herring
  2020-10-07 17:49 ` [PATCH 3/5] arm64: dts: sdm845: add oneplus 6/t devices Caleb Connolly
                   ` (2 subsequent siblings)
  4 siblings, 2 replies; 17+ messages in thread
From: Caleb Connolly @ 2020-10-07 17:49 UTC (permalink / raw)
  To: linux-arm-msm, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Rob Herring, Caleb Connolly
  Cc: ~postmarketos/upstreaming, dri-devel, devicetree, linux-kernel

Document the OnePlus 6/T common panel driver, example from
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 .../display/panel/panel-oneplus6.yaml         | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml b/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
new file mode 100644
index 000000000000..23ba369cc2f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-oneplus6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OnePlus 6/T panel driver
+
+description: |
+  The OnePlus 6 panel driver encompasses the display panels found in the
+  OnePlus 6 and 6T devices, the panels have almost identical behaviour and
+  are not used by any other devices.
+
+maintainers:
+  - Caleb Connolly <caleb@connolly.tech>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - samsung,sofef00
+      - samsung,s6e3fc2x01
+
+  reg: true
+  reset-gpios: true
+  port: true
+
+  vddio-supply:
+    description: VDDIO regulator
+
+required:
+  - compatible
+  - reset-gpios
+  - vddio-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    &dsi0 {
+      status = "okay";
+      vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      display_panel: panel@0 {
+        status = "okay";
+        compatible = "samsung,sofef00";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+
+        vddio-supply = <&vreg_l14a_1p88>;
+
+        reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+        port {
+          panel_in: endpoint {
+            remote-endpoint = <&dsi0_out>;
+          };
+        };
+      };
+    };
+
+...
-- 
2.28.0



^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH 3/5] arm64: dts: sdm845: add oneplus 6/t devices
       [not found] <20201007174736.292968-1-caleb@connolly.tech>
  2020-10-07 17:49 ` [PATCH 1/5] drm/panel/oneplus6: Add panel-oneplus6 Caleb Connolly
  2020-10-07 17:49 ` [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel Caleb Connolly
@ 2020-10-07 17:49 ` Caleb Connolly
  2020-10-07 17:49 ` [PATCH 4/5] dt-bindings: add vendor bindings for OnePlus Caleb Connolly
  2020-10-07 17:49 ` [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6 Caleb Connolly
  4 siblings, 0 replies; 17+ messages in thread
From: Caleb Connolly @ 2020-10-07 17:49 UTC (permalink / raw)
  To: linux-arm-msm, Andy Gross, Bjorn Andersson, Rob Herring,
	Kees Cook, Anton Vorontsov, Colin Cross, Tony Luck
  Cc: ~postmarketos/upstreaming, Caleb Connolly, devicetree, linux-kernel

Add initial support for the OnePlus 6 (enchilada) and 6T (fajita) based
on the sdm845-mtp DT. Support includes:

* Both display panels work
* Touch screen support with rmi4
* RTC support
* Remoteprocs boot and can be interacted with over QRTR.
* WLAN + Bluetooth both work, although bluetooth doesn't appear in
rfkill.
* Volume / power buttons and OnePlus Tri-State switch are functional
* USB gadget support is forced as it doesn't seem to be able to detect
USB cable connect/disconnect, perhaps to do with OnePlus' propriatery
fast charge IC.

The device successfully boots into Phosh using postmarketOS.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 .../boot/dts/qcom/sdm845-oneplus-common.dtsi  | 860 ++++++++++++++++++
 .../dts/qcom/sdm845-oneplus-enchilada.dts     |  19 +
 .../boot/dts/qcom/sdm845-oneplus-fajita.dts   |  19 +
 4 files changed, 900 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d8f1466e6758..a14f246e2367 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -30,6 +30,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-enchilada.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-fajita.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
new file mode 100644
index 000000000000..b0b09fe94f20
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -0,0 +1,860 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sdm845.dtsi"
+
+// Needed for some GPIO (like the volume buttons)
+#include "pm8998.dtsi"
+
+// For LEDs
+#include "pmi8998.dtsi"
+
+/ {
+
+	aliases {
+		hsuart0 = &uart6;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	gpio_tristate_key: gpio-keys {
+		compatible = "gpio-keys";
+		label = "Tri-state key";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tri_state_key_default>;
+
+		state-top {
+			label = "Tri-state key top";
+			linux,code = <KEY_A>;
+			// gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+			debounce-interval = <500>;
+			linux,can-disable;
+		};
+
+		state-middle {
+			label = "Tri-state key middle";
+			linux,code = <KEY_B>;
+			// gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <52 IRQ_TYPE_EDGE_FALLING>;
+			debounce-interval = <500>;
+			linux,can-disable;
+		};
+
+		state-bottom {
+			label = "Tri-state key bottom";
+			linux,code = <KEY_C>;
+			// gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <126 IRQ_TYPE_EDGE_FALLING>;
+			debounce-interval = <500>;
+			linux,can-disable;
+		};
+	};
+
+	gpio_vol_keys: gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
+
+		vol-down {
+			label = "Volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+
+		vol-up {
+			label = "Volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	extcon_usb1: extcon-usb-1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pmi8998-rpmh-regulators {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	pm8005-rpmh-regulators {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+/* Reserved memory changes */
+/*
+ * The rmtfs memory region in downstream is 'dynamically allocated'
+ * but given the same address every time. hard code it here as this address is
+ * where the modem firmware expects it to be.
+ */
+/delete-node/ &rmtfs_mem;
+
+/ {
+	reserved-memory {
+		rmtfs_mem: memory@f5b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf5b01000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		/*
+		 * This must be reserved as the device will
+		 * crash if memory is allocated here.
+		 */
+		removed_region: memory@88f00000 {
+			no-map;
+			reg = <0 0x88f00000 0 0x1c00000>;
+		};
+
+		ramoops: ramoops@ac300000 {
+			compatible = "ramoops";
+			reg = <0 0xac300000 0 0x400000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			devinfo-size = <0x1000>;
+			ecc-size = <16>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
+};
+
+/* Modem/wifi*/
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		/* In subdir qca/ in /lib/firmware */
+		firmware-name = "oneplus6/crnv21.bin";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&qup_uart6_default {
+	pinmux {
+		 pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		 function = "qup6";
+	};
+
+	cts {
+		pins = "gpio45";
+		bias-pull-down;
+	};
+
+	rts-tx {
+		pins = "gpio46", "gpio47";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rx {
+		pins = "gpio48";
+		bias-pull-up;
+	};
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+
+	/* disable USB3 clock requirement as we are in USB 2 mode */
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	/*
+	 * Can't detect USB cable being plugged / unplugged, so this is needed
+	 * for gadget mode
+	 */
+	dr_mode = "peripheral";
+
+	/* fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	extcon = <&extcon_usb1>;
+
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	display_panel: panel@0 {
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		vddio-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+/* GENI device - does i2c, uart, spi and all that stuff */
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&i2c10 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		bq27541_battery: bq27541-battery@55 {
+				status = "okay";
+				compatible = "ti,bq27541";
+				reg = <0x55>;
+		};
+};
+
+&i2c12 {
+	status = "okay";
+
+	touchscreen: synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 0x2008>; // IRQF_ONESHOT | IRQF_TRIGGER_LOW
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_default_pins &ts_enable_1p8>;
+
+		vdd-supply = <&vreg_l28a_3p0>;
+		vio-supply = <&vreg_l6a_1p8>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4_f12: rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <144>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+		};
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_i2c12_default {
+	 mux {
+		 pins = "gpio49", "gpio50";
+		 function = "qup12";
+	 };
+	 config {
+		 pins = "gpio49", "gpio50";
+		 drive-strength = <2>;
+		bias-disable;
+	 };
+};
+
+&qup_i2c10_default {
+	pinconf {
+		pins = "gpio55", "gpio56";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_uart9_default {
+	pinconf-tx {
+		pins = "gpio4";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-rx {
+		pins = "gpio5";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&pm8998_gpio {
+	volume_down_gpio: pm8998_gpio5 {
+		pinconf {
+			pins = "gpio5";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+
+	volume_up_gpio: pm8998_gpio6 {
+		pinconf {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_clk: sdc2-clk {
+		pinconf {
+			pins = "sdc2_clk";
+			bias-disable;
+
+			/*
+			 * It seems that mmc_test reports errors if drive
+			 * strength is not 16 on clk, cmd, and data pins.
+			 */
+			drive-strength = <16>;
+		};
+	};
+
+	sdc2_cmd: sdc2-cmd {
+		pinconf {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+
+	sdc2_data: sdc2-data {
+		pinconf {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+
+	tri_state_key_default: tri_state_key_default {
+		mux {
+			pins = "gpio40", "gpio42", "gpio26";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio40", "gpio42", "gpio26";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	ts_default_pins: ts-int {
+		mux {
+			pins = "gpio99", "gpio125";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio99", "gpio125";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	ts_enable_1p8: ts-1p8 {
+		mux {
+			pins = "gpio88";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio88";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	panel_reset_pins: panel-reset {
+		mux {
+			pins = "gpio6", "gpio25", "gpio26";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio6", "gpio25", "gpio26";
+			drive-strength = <8>;
+			bias-disable = <0>;
+		};
+	};
+
+	panel_te_pin: panel-te {
+		mux {
+			pins = "gpio10";
+			function = "mdp_vsync";
+		};
+
+		config {
+			pins = "gpio10";
+			drive-strength = <2>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	panel_esd_pin: panel-esd {
+		mux {
+			pins = "gpio30";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio30";
+			drive-strength = <2>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
new file mode 100644
index 000000000000..a62e211a2797
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6 (enchilada) specific device tree
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 6";
+	compatible = "oneplus,enchilada", "oneplus,oneplus6", "qcom,sdm845";
+};
+
+&display_panel {
+	status = "okay";
+
+	compatible = "samsung,sofef00";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
new file mode 100644
index 000000000000..d418389bb2d0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6T (fajita) specific device tree
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 6T";
+	compatible = "oneplus,fajita", "oneplus,oneplus6", "qcom,sdm845";
+};
+
+&display_panel {
+	status = "okay";
+
+	compatible = "samsung,s6e3fc2x01";
+};
-- 
2.28.0



^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH 4/5] dt-bindings: add vendor bindings for OnePlus
       [not found] <20201007174736.292968-1-caleb@connolly.tech>
                   ` (2 preceding siblings ...)
  2020-10-07 17:49 ` [PATCH 3/5] arm64: dts: sdm845: add oneplus 6/t devices Caleb Connolly
@ 2020-10-07 17:49 ` Caleb Connolly
  2020-10-07 17:49 ` [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6 Caleb Connolly
  4 siblings, 0 replies; 17+ messages in thread
From: Caleb Connolly @ 2020-10-07 17:49 UTC (permalink / raw)
  To: linux-arm-msm, Rob Herring, Caleb Connolly
  Cc: ~postmarketos/upstreaming, Rob Herring, devicetree, linux-kernel

Used by the OnePlus 6/T device trees

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 .../bindings/arm/oneplus/oneplus-boards.yaml  | 25 +++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 ++
 2 files changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/oneplus/oneplus-boards.yaml

diff --git a/Documentation/devicetree/bindings/arm/oneplus/oneplus-boards.yaml b/Documentation/devicetree/bindings/arm/oneplus/oneplus-boards.yaml
new file mode 100644
index 000000000000..a4d9bbd5681f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/oneplus/oneplus-boards.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/oneplus/oneplus-boards.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OnePlus based boards
+
+maintainers:
+  - Caleb Connolly <caleb@connolly.tech>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: SDM845 based boards
+        items:
+          - enum:
+              - oneplus,enchilada               # OnePlus 6
+              - oneplus,fajita                  # OnePlus 6T
+          - const: oneplus,oneplus6             # OnePlus 6 and derivatives
+
+required:
+  - compatible
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 63996ab03521..6672d7242d54 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -754,6 +754,8 @@ patternProperties:
     description: OLIMEX Ltd.
   "^olpc,.*":
     description: One Laptop Per Child
+  "^oneplus,.*":
+    description: One Plus Technology (Shenzhen) Co., Ltd..
   "^onion,.*":
     description: Onion Corporation
   "^onnn,.*":
-- 
2.28.0



^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
       [not found] <20201007174736.292968-1-caleb@connolly.tech>
                   ` (3 preceding siblings ...)
  2020-10-07 17:49 ` [PATCH 4/5] dt-bindings: add vendor bindings for OnePlus Caleb Connolly
@ 2020-10-07 17:49 ` Caleb Connolly
  2020-10-08 10:03   ` Wolfram Sang
  2020-10-09  5:26   ` Akash Asthana
  4 siblings, 2 replies; 17+ messages in thread
From: Caleb Connolly @ 2020-10-07 17:49 UTC (permalink / raw)
  To: linux-arm-msm, Andy Gross, Bjorn Andersson, Akash Asthana,
	Mukesh Savaliya
  Cc: ~postmarketos/upstreaming, Caleb Connolly, linux-i2c, linux-kernel

The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
is used for i2c, so disable it.

https://patchwork.kernel.org/patch/11133827/
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index dead5db3315a..50a0674a6553 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -358,7 +358,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 	struct geni_se *se = &gi2c->se;
 	size_t len = msg->len;
 
-	if (!of_machine_is_compatible("lenovo,yoga-c630"))
+	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
+	    !of_machine_is_compatible("oneplus,oneplus6"))
 		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
 
 	if (dma_buf)
@@ -400,7 +401,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 	struct geni_se *se = &gi2c->se;
 	size_t len = msg->len;
 
-	if (!of_machine_is_compatible("lenovo,yoga-c630"))
+	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
+	    !of_machine_is_compatible("oneplus,oneplus6"))
 		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
 
 	if (dma_buf)
-- 
2.28.0



^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  2020-10-07 17:49 ` [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6 Caleb Connolly
@ 2020-10-08 10:03   ` Wolfram Sang
  2020-10-08 10:46     ` Caleb Connolly
  2020-10-09  6:53     ` Mukesh, Savaliya
  2020-10-09  5:26   ` Akash Asthana
  1 sibling, 2 replies; 17+ messages in thread
From: Wolfram Sang @ 2020-10-08 10:03 UTC (permalink / raw)
  To: Caleb Connolly
  Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, Akash Asthana,
	Mukesh Savaliya, ~postmarketos/upstreaming, linux-i2c,
	linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1592 bytes --]

On Wed, Oct 07, 2020 at 05:49:35PM +0000, Caleb Connolly wrote:
> The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
> is used for i2c, so disable it.
> 
> https://patchwork.kernel.org/patch/11133827/
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>

May I ask for a quick review here, so we can get this into 5.9 if
qcom-geni maintainers agree this is good to go?

> ---
>  drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index dead5db3315a..50a0674a6553 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -358,7 +358,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>  	struct geni_se *se = &gi2c->se;
>  	size_t len = msg->len;
>  
> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>  		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>  
>  	if (dma_buf)
> @@ -400,7 +401,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>  	struct geni_se *se = &gi2c->se;
>  	size_t len = msg->len;
>  
> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>  		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>  
>  	if (dma_buf)
> -- 
> 2.28.0
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  2020-10-08 10:03   ` Wolfram Sang
@ 2020-10-08 10:46     ` Caleb Connolly
  2020-10-08 12:19       ` Wolfram Sang
  2020-10-09  6:53     ` Mukesh, Savaliya
  1 sibling, 1 reply; 17+ messages in thread
From: Caleb Connolly @ 2020-10-08 10:46 UTC (permalink / raw)
  To: Wolfram Sang
  Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, Akash Asthana,
	Mukesh Savaliya, ~postmarketos/upstreaming, linux-i2c,
	linux-kernel

On 2020-10-08 11:03, Wolfram Sang wrote:
> On Wed, Oct 07, 2020 at 05:49:35PM +0000, Caleb Connolly wrote:
>> The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
>> is used for i2c, so disable it.
>>
>> https://patchwork.kernel.org/patch/11133827/
>> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> May I ask for a quick review here, so we can get this into 5.9 if
> qcom-geni maintainers agree this is good to go?

Sorry it wasn't mentioned in my first message, this patch depends on the 
rest in the series found here: 
https://lore.kernel.org/linux-arm-msm/20201007174736.292968-1-caleb@connolly.tech/#r

>> ---
>>   drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++--
>>   1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
>> index dead5db3315a..50a0674a6553 100644
>> --- a/drivers/i2c/busses/i2c-qcom-geni.c
>> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
>> @@ -358,7 +358,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>>   	struct geni_se *se = &gi2c->se;
>>   	size_t len = msg->len;
>>   
>> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
>> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
>> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>>   		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>>   
>>   	if (dma_buf)
>> @@ -400,7 +401,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>>   	struct geni_se *se = &gi2c->se;
>>   	size_t len = msg->len;
>>   
>> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
>> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
>> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>>   		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>>   
>>   	if (dma_buf)
>> -- 
>> 2.28.0
>>
>>



^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  2020-10-08 10:46     ` Caleb Connolly
@ 2020-10-08 12:19       ` Wolfram Sang
  0 siblings, 0 replies; 17+ messages in thread
From: Wolfram Sang @ 2020-10-08 12:19 UTC (permalink / raw)
  To: Caleb Connolly
  Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, Akash Asthana,
	Mukesh Savaliya, ~postmarketos/upstreaming, linux-i2c,
	linux-kernel

[-- Attachment #1: Type: text/plain, Size: 827 bytes --]

On Thu, Oct 08, 2020 at 10:46:05AM +0000, Caleb Connolly wrote:
> On 2020-10-08 11:03, Wolfram Sang wrote:
> > On Wed, Oct 07, 2020 at 05:49:35PM +0000, Caleb Connolly wrote:
> >> The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
> >> is used for i2c, so disable it.
> >>
> >> https://patchwork.kernel.org/patch/11133827/
> >> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> > May I ask for a quick review here, so we can get this into 5.9 if
> > qcom-geni maintainers agree this is good to go?
> 
> Sorry it wasn't mentioned in my first message, this patch depends on the 
> rest in the series found here: 
> https://lore.kernel.org/linux-arm-msm/20201007174736.292968-1-caleb@connolly.tech/#r

Ah, so the device is not upstream yet and there is no hurry. Good to
know. Thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  2020-10-07 17:49 ` [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6 Caleb Connolly
  2020-10-08 10:03   ` Wolfram Sang
@ 2020-10-09  5:26   ` Akash Asthana
  2020-10-09  5:58     ` Wolfram Sang
  1 sibling, 1 reply; 17+ messages in thread
From: Akash Asthana @ 2020-10-09  5:26 UTC (permalink / raw)
  To: Caleb Connolly, linux-arm-msm, Andy Gross, Bjorn Andersson,
	Mukesh Savaliya
  Cc: ~postmarketos/upstreaming, linux-i2c, linux-kernel

On 10/7/2020 11:19 PM, Caleb Connolly wrote:
> The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
> is used for i2c, so disable it.
>
> https://patchwork.kernel.org/patch/11133827

Reviewed-by: Akash Asthana <akashast@codeaurora.org>

> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>   drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index dead5db3315a..50a0674a6553 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -358,7 +358,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>   	struct geni_se *se = &gi2c->se;
>   	size_t len = msg->len;
>   
> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>   		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>   
>   	if (dma_buf)
> @@ -400,7 +401,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>   	struct geni_se *se = &gi2c->se;
>   	size_t len = msg->len;
>   
> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>   		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>   
>   	if (dma_buf)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  2020-10-09  5:26   ` Akash Asthana
@ 2020-10-09  5:58     ` Wolfram Sang
  0 siblings, 0 replies; 17+ messages in thread
From: Wolfram Sang @ 2020-10-09  5:58 UTC (permalink / raw)
  To: Akash Asthana
  Cc: Caleb Connolly, linux-arm-msm, Andy Gross, Bjorn Andersson,
	Mukesh Savaliya, ~postmarketos/upstreaming, linux-i2c,
	linux-kernel

[-- Attachment #1: Type: text/plain, Size: 517 bytes --]

On Fri, Oct 09, 2020 at 10:56:15AM +0530, Akash Asthana wrote:
> On 10/7/2020 11:19 PM, Caleb Connolly wrote:
> > The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
> > is used for i2c, so disable it.
> > 
> > https://patchwork.kernel.org/patch/11133827
> 
> Reviewed-by: Akash Asthana <akashast@codeaurora.org>

Thanks!

Acked-by: Wolfram Sang <wsa@kernel.org>

So, this patch can go in via whatever tree seems apropriate. Let me know
if I should take this patch individually.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  2020-10-08 10:03   ` Wolfram Sang
  2020-10-08 10:46     ` Caleb Connolly
@ 2020-10-09  6:53     ` Mukesh, Savaliya
  1 sibling, 0 replies; 17+ messages in thread
From: Mukesh, Savaliya @ 2020-10-09  6:53 UTC (permalink / raw)
  To: Wolfram Sang, Caleb Connolly
  Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, Akash Asthana,
	~postmarketos/upstreaming, linux-i2c, linux-kernel


On 10/8/2020 3:33 PM, Wolfram Sang wrote:
> On Wed, Oct 07, 2020 at 05:49:35PM +0000, Caleb Connolly wrote:
>> The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
>> is used for i2c, so disable it.
>>
>> https://patchwork.kernel.org/patch/11133827/
>> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
> May I ask for a quick review here, so we can get this into 5.9 if
> qcom-geni maintainers agree this is good to go?
>
>> ---
>>   drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++--
>>   1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
>> index dead5db3315a..50a0674a6553 100644
>> --- a/drivers/i2c/busses/i2c-qcom-geni.c
>> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
>> @@ -358,7 +358,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>>   	struct geni_se *se = &gi2c->se;
>>   	size_t len = msg->len;
>>   
>> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
>> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
>> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>>   		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>>   
>>   	if (dma_buf)
>> @@ -400,7 +401,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
>>   	struct geni_se *se = &gi2c->se;
>>   	size_t len = msg->len;
>>   
>> -	if (!of_machine_is_compatible("lenovo,yoga-c630"))
>> +	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
>> +	    !of_machine_is_compatible("oneplus,oneplus6"))
>>   		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
>>   
>>   	if (dma_buf)
>> -- 
>> 2.28.0
>>
>>

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel
  2020-10-07 17:49 ` [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel Caleb Connolly
@ 2020-10-09 14:02   ` Rob Herring
  2020-10-09 14:05   ` Rob Herring
  1 sibling, 0 replies; 17+ messages in thread
From: Rob Herring @ 2020-10-09 14:02 UTC (permalink / raw)
  To: Caleb Connolly
  Cc: devicetree, Sam Ravnborg, linux-kernel, Rob Herring,
	Thierry Reding, linux-arm-msm, David Airlie,
	~postmarketos/upstreaming, Daniel Vetter, dri-devel

On Wed, 07 Oct 2020 17:49:14 +0000, Caleb Connolly wrote:
> Document the OnePlus 6/T common panel driver, example from
> arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  .../display/panel/panel-oneplus6.yaml         | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/display/panel/panel-oneplus6.example.dts:19.9-14 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/display/panel/panel-oneplus6.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1366: dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1378187

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel
  2020-10-07 17:49 ` [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel Caleb Connolly
  2020-10-09 14:02   ` Rob Herring
@ 2020-10-09 14:05   ` Rob Herring
  2020-10-18 12:33     ` Caleb Connolly
  1 sibling, 1 reply; 17+ messages in thread
From: Rob Herring @ 2020-10-09 14:05 UTC (permalink / raw)
  To: Caleb Connolly
  Cc: linux-arm-msm, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, ~postmarketos/upstreaming, dri-devel, devicetree,
	linux-kernel

On Wed, Oct 07, 2020 at 05:49:14PM +0000, Caleb Connolly wrote:
> Document the OnePlus 6/T common panel driver, example from
> arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  .../display/panel/panel-oneplus6.yaml         | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml b/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
> new file mode 100644
> index 000000000000..23ba369cc2f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/panel-oneplus6.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OnePlus 6/T panel driver
> +
> +description: |
> +  The OnePlus 6 panel driver encompasses the display panels found in the
> +  OnePlus 6 and 6T devices, the panels have almost identical behaviour and
> +  are not used by any other devices.
> +
> +maintainers:
> +  - Caleb Connolly <caleb@connolly.tech>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,sofef00
> +      - samsung,s6e3fc2x01
> +
> +  reg: true
> +  reset-gpios: true
> +  port: true
> +
> +  vddio-supply:
> +    description: VDDIO regulator

A panel with a single supply can use panel-simple-dsi.yaml.

'reset-gpios' was missing, but has been added recently.

Rob

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel
  2020-10-09 14:05   ` Rob Herring
@ 2020-10-18 12:33     ` Caleb Connolly
  0 siblings, 0 replies; 17+ messages in thread
From: Caleb Connolly @ 2020-10-18 12:33 UTC (permalink / raw)
  To: Rob Herring
  Cc: linux-arm-msm, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, ~postmarketos/upstreaming, dri-devel, devicetree,
	linux-kernel

On 2020-10-09 15:05, Rob Herring wrote:
> On Wed, Oct 07, 2020 at 05:49:14PM +0000, Caleb Connolly wrote:
>> Document the OnePlus 6/T common panel driver, example from
>> arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>
>> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
>> ---
>>   .../display/panel/panel-oneplus6.yaml         | 73 +++++++++++++++++++
>>   1 file changed, 73 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml b/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
>> new file mode 100644
>> index 000000000000..23ba369cc2f5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/panel/panel-oneplus6.yaml
>> @@ -0,0 +1,73 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/panel/panel-oneplus6.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: OnePlus 6/T panel driver
>> +
>> +description: |
>> +  The OnePlus 6 panel driver encompasses the display panels found in the
>> +  OnePlus 6 and 6T devices, the panels have almost identical behaviour and
>> +  are not used by any other devices.
>> +
>> +maintainers:
>> +  - Caleb Connolly <caleb@connolly.tech>
>> +
>> +allOf:
>> +  - $ref: panel-common.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - samsung,sofef00
>> +      - samsung,s6e3fc2x01
>> +
>> +  reg: true
>> +  reset-gpios: true
>> +  port: true
>> +
>> +  vddio-supply:
>> +    description: VDDIO regulator
> A panel with a single supply can use panel-simple-dsi.yaml.
>
> 'reset-gpios' was missing, but has been added recently.
>
> Rob

Thanks, I'll move docs into panel-simple-dsi.yaml

Caleb



^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 1/5] drm/panel/oneplus6: Add panel-oneplus6
  2020-10-07 17:49 ` [PATCH 1/5] drm/panel/oneplus6: Add panel-oneplus6 Caleb Connolly
@ 2020-10-18 13:35   ` Sam Ravnborg
  2020-10-19 14:21     ` Caleb Connolly
  0 siblings, 1 reply; 17+ messages in thread
From: Sam Ravnborg @ 2020-10-18 13:35 UTC (permalink / raw)
  To: Caleb Connolly
  Cc: linux-arm-msm, Thierry Reding, David Airlie, Daniel Vetter,
	~postmarketos/upstreaming, linux-kernel, dri-devel

Hi Caleb.

I have missed to provice review feedback so here goes.
There is some improvements that can be made as the infrastructure has
evolved since the driver was started.
But despite the number of comments below it is all trivial and the
driver looks good in general.

I look forward to see the next revision.

	Sam

On Wed, Oct 07, 2020 at 05:49:08PM +0000, Caleb Connolly wrote:
> This commit adds support for the display panels used in the OnePlus 6 /
> T devices.
> 
> The OnePlus 6/T devices use different panels however they are
> functionally identical with much of the commands being shared. The
> panels don't appear to be used by any other devices some combine them as
> one driver that is specific to the devices.
> 
> The panels are: samsung,sofef00
> and             samsung,s6e3fc2x01
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  drivers/gpu/drm/panel/Kconfig          |  12 +
>  drivers/gpu/drm/panel/Makefile         |   1 +
>  drivers/gpu/drm/panel/panel-oneplus6.c | 418 +++++++++++++++++++++++++

It would be better to name the driver after the panels and not their
user. So something like panel-samsung-sofef00.
It is OK to name it after one panel and let it support mroe than one
panel. The Kconfig description could then expain where it is used.


>  3 files changed, 431 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-oneplus6.c
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index de2f2a452be5..d72862265400 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -229,6 +229,18 @@ config DRM_PANEL_OLIMEX_LCD_OLINUXINO
>  	  Say Y here if you want to enable support for Olimex Ltd.
>  	  LCD-OLinuXino panel.
>  
> +config DRM_PANEL_ONEPLUS6
> +	tristate "OnePlus 6/6T Samsung AMOLED DSI command mode panels"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	select VIDEOMODE_HELPERS
> +	help
> +	  Say Y or M here if you want to enable support for the Samsung AMOLED
> +	  command mode panels found in the OnePlus 6/6T smartphones.
> +
> +	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
> +
>  config DRM_PANEL_ORISETECH_OTM8009A
>  	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
>  	depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index e45ceac6286f..017539056f53 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
>  obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
>  obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
>  obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
> +obj-$(CONFIG_DRM_PANEL_ONEPLUS6) += panel-oneplus6.o
>  obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
>  obj-$(CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS) += panel-osd-osd101t2587-53ts.o
>  obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
> diff --git a/drivers/gpu/drm/panel/panel-oneplus6.c b/drivers/gpu/drm/panel/panel-oneplus6.c
> new file mode 100644
> index 000000000000..5e212774b1e0
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-oneplus6.c
> @@ -0,0 +1,418 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* Copyright (c) 2020 Caleb Connolly <caleb@connolly.tech>
> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> + *   Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + *
> + * Caleb Connolly <caleb@connolly.tech>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <linux/backlight.h>
Keep all linux include together.

> +
> +struct oneplus6_panel {
> +	struct drm_panel panel;
> +	struct mipi_dsi_device *dsi;
> +	struct backlight_device *backlight;
Use drm_panel backlight support - so you can drop this variable and
simplify some of the code below.

> +	struct regulator *supply;
> +	struct gpio_desc *reset_gpio;
> +	struct gpio_desc *enable_gpio;
The enable_gpio is not used.

> +	const struct drm_display_mode *mode;
> +	bool prepared;
> +	bool enabled;
> +};
> +
> +static inline
> +struct oneplus6_panel *to_oneplus6_panel(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct oneplus6_panel, panel);
> +}
> +
> +#define dsi_dcs_write_seq(dsi, seq...) do {				\
> +		static const u8 d[] = { seq };				\
> +		int ret;						\
> +		ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
> +		if (ret < 0)						\
> +			return ret;					\
> +	} while (0)
> +
> +static void oneplus6_panel_reset(struct oneplus6_panel *ctx)
> +{
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +	usleep_range(5000, 6000);
> +}
IT is not obvious if this helper reset the panel or de-assert the reset
signal. It does not help me that there is only one helper despite both
operatiosn are needed.

> +
> +static int oneplus6_panel_on(struct oneplus6_panel *ctx)
> +{
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	usleep_range(10000, 11000);
> +
> +	dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> +
> +	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set tear on: %d\n", ret);
> +		return ret;
> +	}
> +
> +	dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> +	dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> +	dsi_dcs_write_seq(dsi, 0xb0, 0x07);
> +	dsi_dcs_write_seq(dsi, 0xb6, 0x12);
> +	dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
> +	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
> +	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> +
> +	ret = mipi_dsi_dcs_set_display_on(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set display on: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int oneplus6_panel_off(struct oneplus6_panel *ctx)
> +{
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_set_display_off(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set display off: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(40);
> +
> +	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(160);
> +
> +	return 0;
> +}
> +
> +static int oneplus6_panel_prepare(struct drm_panel *panel)
> +{
> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
> +	struct device *dev = &ctx->dsi->dev;
> +	int ret;
> +
> +	if (ctx->prepared)
> +		return 0;
> +
Do you not need to do a regulator_enable() here to get power supply to
the panel?

> +	oneplus6_panel_reset(ctx);
> +
> +	ret = oneplus6_panel_on(ctx);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to initialize panel: %d\n", ret);
> +		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> +		return ret;
> +	}
> +
> +	ctx->prepared = true;
> +	return 0;
> +}
> +
> +static int oneplus6_panel_unprepare(struct drm_panel *panel)
> +{
> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
> +	struct device *dev = &ctx->dsi->dev;
> +	int ret;
> +
> +	if (!ctx->prepared)
> +		return 0;
> +
> +	ret = regulator_enable(ctx->supply);
Looks strange that the power supply is enabled here - was it not enabled
before to use the panel?

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enable regulator: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = oneplus6_panel_off(ctx);
> +	if (ret < 0)
> +		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> +	regulator_disable(ctx->supply);
> +
> +	ctx->prepared = false;
> +	return 0;
> +}
> +
> +
> +static int oneplus6_panel_enable(struct drm_panel *panel)
> +{
> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
> +	int ret;
> +
> +	if (ctx->enabled)
> +		return 0;
> +
> +	ret = backlight_enable(ctx->backlight);
> +	if (ret < 0) {
> +		dev_err(&ctx->dsi->dev, "Failed to enable backlight: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->enabled = true;
> +	return 0;
> +}
> +
> +static int oneplus6_panel_disable(struct drm_panel *panel)
> +{
> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
> +	int ret;
> +
> +	if (!ctx->enabled)
> +		return 0;
> +
> +	ret = backlight_disable(ctx->backlight);
> +	if (ret < 0) {
> +		dev_err(&ctx->dsi->dev, "Failed to disable backlight: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->enabled = false;
> +	return 0;
> +}
When backlight support in drm_panel is used the two enabled/disable
functions can be dropped and the enabled flag is then no longer sued and
can be dropped too.

> +
> +
> +static const struct drm_display_mode enchilada_panel_mode = {
> +	.clock = (1080 + 112 + 16 + 36) * (2280 + 36 + 8 + 12) * 60 / 1000,
> +	.hdisplay = 1080,
> +	.hsync_start = 1080 + 112,
> +	.hsync_end = 1080 + 112 + 16,
> +	.htotal = 1080 + 112 + 16 + 36,
> +	.vdisplay = 2280,
> +	.vsync_start = 2280 + 36,
> +	.vsync_end = 2280 + 36 + 8,
> +	.vtotal = 2280 + 36 + 8 + 12,
> +	.width_mm = 68,
> +	.height_mm = 145,
> +};
> +
> +static const struct drm_display_mode fajita_panel_mode = {
> +	.clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000,
> +	.hdisplay = 1080,
> +	.hsync_start = 1080 + 72,
> +	.hsync_end = 1080 + 72 + 16,
> +	.htotal = 1080 + 72 + 16 + 36,
> +	.vdisplay = 2340,
> +	.vsync_start = 2340 + 32,
> +	.vsync_end = 2340 + 32 + 4,
> +	.vtotal = 2340 + 32 + 4 + 18,
> +	.width_mm = 68,
> +	.height_mm = 145,
> +};
> +
> +static int oneplus6_panel_get_modes(struct drm_panel *panel,
> +						struct drm_connector *connector)
Some indent looks fishy here.
Try to check the driver using checkpatch --strict - it should be clean.
> +{
> +	struct drm_display_mode *mode;
> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
> +
> +	mode = drm_mode_duplicate(connector->dev, ctx->mode);
> +	if (!mode)
> +		return -ENOMEM;
> +
> +	drm_mode_set_name(mode);
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	connector->display_info.width_mm = mode->width_mm;
> +	connector->display_info.height_mm = mode->height_mm;
> +	drm_mode_probed_add(connector, mode);
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs oneplus6_panel_panel_funcs = {
> +	.disable = oneplus6_panel_disable,
> +	.enable = oneplus6_panel_enable,
> +	.prepare = oneplus6_panel_prepare,
> +	.unprepare = oneplus6_panel_unprepare,
> +	.get_modes = oneplus6_panel_get_modes,
> +};
> +
> +static int oneplus6_panel_bl_get_brightness(struct backlight_device *bl)
> +{
> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
> +	int err;
> +	u16 brightness = bl->props.brightness;
No need to read the brightness here. It will be set if
mipi_dsi_dcs_get_display_brightness() succeeds.
> +
> +	err = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> +	if (err < 0) {
> +		return err;
> +	}
> +
> +	return brightness & 0xff;
> +}
> +
> +static int oneplus6_panel_bl_update_status(struct backlight_device *bl)
> +{
> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
> +	int err;
> +	unsigned short brightness;
> +
Use backlight_get_brightness() to get the current brightness from the
backlight device. Do not access the properties direct.
> +	// This panel needs the high and low bytes swapped for the brightness value
> +	brightness = ((bl->props.brightness<<8)&0xff00)|((bl->props.brightness>>8)&0x00ff);
> +
> +	err = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> +	if (err < 0) {
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct backlight_ops oneplus6_panel_bl_ops = {
> +	.update_status = oneplus6_panel_bl_update_status,
> +	.get_brightness = oneplus6_panel_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +oneplus6_panel_create_backlight(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct backlight_properties props = {
const
> +		.type = BACKLIGHT_PLATFORM,
> +		.scale = BACKLIGHT_SCALE_LINEAR,
> +		.brightness = 255,
> +		.max_brightness = 512,
> +	};
> +
> +	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> +						  &oneplus6_panel_bl_ops, &props);
> +}
> +
> +
> +static int oneplus6_panel_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct oneplus6_panel *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	ctx->mode = of_device_get_match_data(dev);
> +
> +	if (!ctx->mode) {
> +		dev_err(dev, "Missing device mode\n");
> +		return -ENODEV;
> +	}
> +
> +	ctx->supply = devm_regulator_get(dev, "vddio");
> +	if (IS_ERR(ctx->supply)) {
> +		ret = PTR_ERR(ctx->supply);
> +		dev_err(dev, "Failed to get vddio regulator: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ctx->reset_gpio)) {
> +		ret = PTR_ERR(ctx->reset_gpio);
> +		dev_warn(dev, "Failed to get reset-gpios: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->backlight = oneplus6_panel_create_backlight(dsi);
> +	if (IS_ERR(ctx->backlight)) {
> +		ret = PTR_ERR(ctx->backlight);
> +		dev_err(dev, "Failed to create backlight: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->dsi = dsi;
> +	mipi_dsi_set_drvdata(dsi, ctx);
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +
> +	drm_panel_init(&ctx->panel, dev, &oneplus6_panel_panel_funcs,
> +			   DRM_MODE_CONNECTOR_DSI);
> +
When using backlight support from drm_panel remember to assing
pane-backlight after drm_panel_init()

> +	ret = drm_panel_add(&ctx->panel);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to add panel: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mipi_dsi_attach(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> +		return ret;
> +	}
> +
> +	dev_info(dev, "Successfully added oneplus6 panel");
This is just noide, drop it.
> +
> +	return 0;
> +}
> +
> +static int oneplus6_panel_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct oneplus6_panel *ctx = mipi_dsi_get_drvdata(dsi);
> +	int ret;
> +
> +	ret = mipi_dsi_detach(dsi);
> +	if (ret < 0)
> +		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> +	drm_panel_remove(&ctx->panel);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id oneplus6_panel_of_match[] = {
> +	{
> +		.compatible = "samsung,sofef00",
> +		.data = &enchilada_panel_mode,
> +	},
> +	{
> +		.compatible = "samsung,s6e3fc2x01",
> +		.data = &fajita_panel_mode,
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, oneplus6_panel_of_match);
> +
> +static struct mipi_dsi_driver oneplus6_panel_driver = {
> +	.probe = oneplus6_panel_probe,
> +	.remove = oneplus6_panel_remove,
> +	.driver = {
> +		.name = "panel-oneplus6",
> +		.of_match_table = oneplus6_panel_of_match,
> +	},
> +};
> +
> +module_mipi_dsi_driver(oneplus6_panel_driver);
> +
> +MODULE_AUTHOR("Caleb Connolly <caleb@connolly.tech>");
> +MODULE_DESCRIPTION("DRM driver for Samsung AMOLED DSI panels found in OnePlus 6/6T phones");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.28.0
> 

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH 1/5] drm/panel/oneplus6: Add panel-oneplus6
  2020-10-18 13:35   ` Sam Ravnborg
@ 2020-10-19 14:21     ` Caleb Connolly
  0 siblings, 0 replies; 17+ messages in thread
From: Caleb Connolly @ 2020-10-19 14:21 UTC (permalink / raw)
  To: Sam Ravnborg
  Cc: linux-arm-msm, Thierry Reding, David Airlie, Daniel Vetter,
	~postmarketos/upstreaming, linux-kernel, dri-devel

Hi Sam,

Thanks a lot for the feedback! I'll get those issues resolved for the 
next revision.

Caleb

On 2020-10-18 14:35, Sam Ravnborg wrote:
> Hi Caleb.
>
> I have missed to provice review feedback so here goes.
> There is some improvements that can be made as the infrastructure has
> evolved since the driver was started.
> But despite the number of comments below it is all trivial and the
> driver looks good in general.
>
> I look forward to see the next revision.
>
> 	Sam
>
> On Wed, Oct 07, 2020 at 05:49:08PM +0000, Caleb Connolly wrote:
>> This commit adds support for the display panels used in the OnePlus 6 /
>> T devices.
>>
>> The OnePlus 6/T devices use different panels however they are
>> functionally identical with much of the commands being shared. The
>> panels don't appear to be used by any other devices some combine them as
>> one driver that is specific to the devices.
>>
>> The panels are: samsung,sofef00
>> and             samsung,s6e3fc2x01
>>
>> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
>> ---
>>   drivers/gpu/drm/panel/Kconfig          |  12 +
>>   drivers/gpu/drm/panel/Makefile         |   1 +
>>   drivers/gpu/drm/panel/panel-oneplus6.c | 418 +++++++++++++++++++++++++
> It would be better to name the driver after the panels and not their
> user. So something like panel-samsung-sofef00.
> It is OK to name it after one panel and let it support mroe than one
> panel. The Kconfig description could then expain where it is used.
>
>
>>   3 files changed, 431 insertions(+)
>>   create mode 100644 drivers/gpu/drm/panel/panel-oneplus6.c
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index de2f2a452be5..d72862265400 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -229,6 +229,18 @@ config DRM_PANEL_OLIMEX_LCD_OLINUXINO
>>   	  Say Y here if you want to enable support for Olimex Ltd.
>>   	  LCD-OLinuXino panel.
>>
>> +config DRM_PANEL_ONEPLUS6
>> +	tristate "OnePlus 6/6T Samsung AMOLED DSI command mode panels"
>> +	depends on OF
>> +	depends on DRM_MIPI_DSI
>> +	depends on BACKLIGHT_CLASS_DEVICE
>> +	select VIDEOMODE_HELPERS
>> +	help
>> +	  Say Y or M here if you want to enable support for the Samsung AMOLED
>> +	  command mode panels found in the OnePlus 6/6T smartphones.
>> +
>> +	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
>> +
>>   config DRM_PANEL_ORISETECH_OTM8009A
>>   	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
>>   	depends on OF
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index e45ceac6286f..017539056f53 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -21,6 +21,7 @@ obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
>>   obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
>>   obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
>>   obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
>> +obj-$(CONFIG_DRM_PANEL_ONEPLUS6) += panel-oneplus6.o
>>   obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
>>   obj-$(CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS) += panel-osd-osd101t2587-53ts.o
>>   obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
>> diff --git a/drivers/gpu/drm/panel/panel-oneplus6.c b/drivers/gpu/drm/panel/panel-oneplus6.c
>> new file mode 100644
>> index 000000000000..5e212774b1e0
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-oneplus6.c
>> @@ -0,0 +1,418 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/* Copyright (c) 2020 Caleb Connolly <caleb@connolly.tech>
>> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
>> + *   Copyright (c) 2020, The Linux Foundation. All rights reserved.
>> + *
>> + * Caleb Connolly <caleb@connolly.tech>
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <video/mipi_display.h>
>> +
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_modes.h>
>> +#include <drm/drm_panel.h>
>> +#include <linux/backlight.h>
> Keep all linux include together.
>
>> +
>> +struct oneplus6_panel {
>> +	struct drm_panel panel;
>> +	struct mipi_dsi_device *dsi;
>> +	struct backlight_device *backlight;
> Use drm_panel backlight support - so you can drop this variable and
> simplify some of the code below.
>
>> +	struct regulator *supply;
>> +	struct gpio_desc *reset_gpio;
>> +	struct gpio_desc *enable_gpio;
> The enable_gpio is not used.
>
>> +	const struct drm_display_mode *mode;
>> +	bool prepared;
>> +	bool enabled;
>> +};
>> +
>> +static inline
>> +struct oneplus6_panel *to_oneplus6_panel(struct drm_panel *panel)
>> +{
>> +	return container_of(panel, struct oneplus6_panel, panel);
>> +}
>> +
>> +#define dsi_dcs_write_seq(dsi, seq...) do {				\
>> +		static const u8 d[] = { seq };				\
>> +		int ret;						\
>> +		ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
>> +		if (ret < 0)						\
>> +			return ret;					\
>> +	} while (0)
>> +
>> +static void oneplus6_panel_reset(struct oneplus6_panel *ctx)
>> +{
>> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +	usleep_range(5000, 6000);
>> +}
> IT is not obvious if this helper reset the panel or de-assert the reset
> signal. It does not help me that there is only one helper despite both
> operatiosn are needed.
>
>> +
>> +static int oneplus6_panel_on(struct oneplus6_panel *ctx)
>> +{
>> +	struct mipi_dsi_device *dsi = ctx->dsi;
>> +	struct device *dev = &dsi->dev;
>> +	int ret;
>> +
>> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>> +
>> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
>> +		return ret;
>> +	}
>> +	usleep_range(10000, 11000);
>> +
>> +	dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>> +
>> +	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to set tear on: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
>> +	dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>> +	dsi_dcs_write_seq(dsi, 0xb0, 0x07);
>> +	dsi_dcs_write_seq(dsi, 0xb6, 0x12);
>> +	dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
>> +	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
>> +	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
>> +
>> +	ret = mipi_dsi_dcs_set_display_on(dsi);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to set display on: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int oneplus6_panel_off(struct oneplus6_panel *ctx)
>> +{
>> +	struct mipi_dsi_device *dsi = ctx->dsi;
>> +	struct device *dev = &dsi->dev;
>> +	int ret;
>> +
>> +	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> +
>> +	ret = mipi_dsi_dcs_set_display_off(dsi);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to set display off: %d\n", ret);
>> +		return ret;
>> +	}
>> +	msleep(40);
>> +
>> +	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
>> +		return ret;
>> +	}
>> +	msleep(160);
>> +
>> +	return 0;
>> +}
>> +
>> +static int oneplus6_panel_prepare(struct drm_panel *panel)
>> +{
>> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
>> +	struct device *dev = &ctx->dsi->dev;
>> +	int ret;
>> +
>> +	if (ctx->prepared)
>> +		return 0;
>> +
> Do you not need to do a regulator_enable() here to get power supply to
> the panel?
>
>> +	oneplus6_panel_reset(ctx);
>> +
>> +	ret = oneplus6_panel_on(ctx);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to initialize panel: %d\n", ret);
>> +		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>> +		return ret;
>> +	}
>> +
>> +	ctx->prepared = true;
>> +	return 0;
>> +}
>> +
>> +static int oneplus6_panel_unprepare(struct drm_panel *panel)
>> +{
>> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
>> +	struct device *dev = &ctx->dsi->dev;
>> +	int ret;
>> +
>> +	if (!ctx->prepared)
>> +		return 0;
>> +
>> +	ret = regulator_enable(ctx->supply);
> Looks strange that the power supply is enabled here - was it not enabled
> before to use the panel?
>
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to enable regulator: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = oneplus6_panel_off(ctx);
>> +	if (ret < 0)
>> +		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
>> +
>> +	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>> +	regulator_disable(ctx->supply);
>> +
>> +	ctx->prepared = false;
>> +	return 0;
>> +}
>> +
>> +
>> +static int oneplus6_panel_enable(struct drm_panel *panel)
>> +{
>> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
>> +	int ret;
>> +
>> +	if (ctx->enabled)
>> +		return 0;
>> +
>> +	ret = backlight_enable(ctx->backlight);
>> +	if (ret < 0) {
>> +		dev_err(&ctx->dsi->dev, "Failed to enable backlight: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ctx->enabled = true;
>> +	return 0;
>> +}
>> +
>> +static int oneplus6_panel_disable(struct drm_panel *panel)
>> +{
>> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
>> +	int ret;
>> +
>> +	if (!ctx->enabled)
>> +		return 0;
>> +
>> +	ret = backlight_disable(ctx->backlight);
>> +	if (ret < 0) {
>> +		dev_err(&ctx->dsi->dev, "Failed to disable backlight: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ctx->enabled = false;
>> +	return 0;
>> +}
> When backlight support in drm_panel is used the two enabled/disable
> functions can be dropped and the enabled flag is then no longer sued and
> can be dropped too.
>
>> +
>> +
>> +static const struct drm_display_mode enchilada_panel_mode = {
>> +	.clock = (1080 + 112 + 16 + 36) * (2280 + 36 + 8 + 12) * 60 / 1000,
>> +	.hdisplay = 1080,
>> +	.hsync_start = 1080 + 112,
>> +	.hsync_end = 1080 + 112 + 16,
>> +	.htotal = 1080 + 112 + 16 + 36,
>> +	.vdisplay = 2280,
>> +	.vsync_start = 2280 + 36,
>> +	.vsync_end = 2280 + 36 + 8,
>> +	.vtotal = 2280 + 36 + 8 + 12,
>> +	.width_mm = 68,
>> +	.height_mm = 145,
>> +};
>> +
>> +static const struct drm_display_mode fajita_panel_mode = {
>> +	.clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000,
>> +	.hdisplay = 1080,
>> +	.hsync_start = 1080 + 72,
>> +	.hsync_end = 1080 + 72 + 16,
>> +	.htotal = 1080 + 72 + 16 + 36,
>> +	.vdisplay = 2340,
>> +	.vsync_start = 2340 + 32,
>> +	.vsync_end = 2340 + 32 + 4,
>> +	.vtotal = 2340 + 32 + 4 + 18,
>> +	.width_mm = 68,
>> +	.height_mm = 145,
>> +};
>> +
>> +static int oneplus6_panel_get_modes(struct drm_panel *panel,
>> +						struct drm_connector *connector)
> Some indent looks fishy here.
> Try to check the driver using checkpatch --strict - it should be clean.
>> +{
>> +	struct drm_display_mode *mode;
>> +	struct oneplus6_panel *ctx = to_oneplus6_panel(panel);
>> +
>> +	mode = drm_mode_duplicate(connector->dev, ctx->mode);
>> +	if (!mode)
>> +		return -ENOMEM;
>> +
>> +	drm_mode_set_name(mode);
>> +
>> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>> +	connector->display_info.width_mm = mode->width_mm;
>> +	connector->display_info.height_mm = mode->height_mm;
>> +	drm_mode_probed_add(connector, mode);
>> +
>> +	return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs oneplus6_panel_panel_funcs = {
>> +	.disable = oneplus6_panel_disable,
>> +	.enable = oneplus6_panel_enable,
>> +	.prepare = oneplus6_panel_prepare,
>> +	.unprepare = oneplus6_panel_unprepare,
>> +	.get_modes = oneplus6_panel_get_modes,
>> +};
>> +
>> +static int oneplus6_panel_bl_get_brightness(struct backlight_device *bl)
>> +{
>> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
>> +	int err;
>> +	u16 brightness = bl->props.brightness;
> No need to read the brightness here. It will be set if
> mipi_dsi_dcs_get_display_brightness() succeeds.
>> +
>> +	err = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
>> +	if (err < 0) {
>> +		return err;
>> +	}
>> +
>> +	return brightness & 0xff;
>> +}
>> +
>> +static int oneplus6_panel_bl_update_status(struct backlight_device *bl)
>> +{
>> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
>> +	int err;
>> +	unsigned short brightness;
>> +
> Use backlight_get_brightness() to get the current brightness from the
> backlight device. Do not access the properties direct.
>> +	// This panel needs the high and low bytes swapped for the brightness value
>> +	brightness = ((bl->props.brightness<<8)&0xff00)|((bl->props.brightness>>8)&0x00ff);
>> +
>> +	err = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
>> +	if (err < 0) {
>> +		return err;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct backlight_ops oneplus6_panel_bl_ops = {
>> +	.update_status = oneplus6_panel_bl_update_status,
>> +	.get_brightness = oneplus6_panel_bl_get_brightness,
>> +};
>> +
>> +static struct backlight_device *
>> +oneplus6_panel_create_backlight(struct mipi_dsi_device *dsi)
>> +{
>> +	struct device *dev = &dsi->dev;
>> +	struct backlight_properties props = {
> const
>> +		.type = BACKLIGHT_PLATFORM,
>> +		.scale = BACKLIGHT_SCALE_LINEAR,
>> +		.brightness = 255,
>> +		.max_brightness = 512,
>> +	};
>> +
>> +	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
>> +						  &oneplus6_panel_bl_ops, &props);
>> +}
>> +
>> +
>> +static int oneplus6_panel_probe(struct mipi_dsi_device *dsi)
>> +{
>> +	struct device *dev = &dsi->dev;
>> +	struct oneplus6_panel *ctx;
>> +	int ret;
>> +
>> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> +	if (!ctx)
>> +		return -ENOMEM;
>> +
>> +	ctx->mode = of_device_get_match_data(dev);
>> +
>> +	if (!ctx->mode) {
>> +		dev_err(dev, "Missing device mode\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	ctx->supply = devm_regulator_get(dev, "vddio");
>> +	if (IS_ERR(ctx->supply)) {
>> +		ret = PTR_ERR(ctx->supply);
>> +		dev_err(dev, "Failed to get vddio regulator: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
>> +	if (IS_ERR(ctx->reset_gpio)) {
>> +		ret = PTR_ERR(ctx->reset_gpio);
>> +		dev_warn(dev, "Failed to get reset-gpios: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ctx->backlight = oneplus6_panel_create_backlight(dsi);
>> +	if (IS_ERR(ctx->backlight)) {
>> +		ret = PTR_ERR(ctx->backlight);
>> +		dev_err(dev, "Failed to create backlight: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ctx->dsi = dsi;
>> +	mipi_dsi_set_drvdata(dsi, ctx);
>> +
>> +	dsi->lanes = 4;
>> +	dsi->format = MIPI_DSI_FMT_RGB888;
>> +
>> +	drm_panel_init(&ctx->panel, dev, &oneplus6_panel_panel_funcs,
>> +			   DRM_MODE_CONNECTOR_DSI);
>> +
> When using backlight support from drm_panel remember to assing
> pane-backlight after drm_panel_init()
>
>> +	ret = drm_panel_add(&ctx->panel);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to add panel: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = mipi_dsi_attach(dsi);
>> +	if (ret < 0) {
>> +		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	dev_info(dev, "Successfully added oneplus6 panel");
> This is just noide, drop it.
>> +
>> +	return 0;
>> +}
>> +
>> +static int oneplus6_panel_remove(struct mipi_dsi_device *dsi)
>> +{
>> +	struct oneplus6_panel *ctx = mipi_dsi_get_drvdata(dsi);
>> +	int ret;
>> +
>> +	ret = mipi_dsi_detach(dsi);
>> +	if (ret < 0)
>> +		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
>> +
>> +	drm_panel_remove(&ctx->panel);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id oneplus6_panel_of_match[] = {
>> +	{
>> +		.compatible = "samsung,sofef00",
>> +		.data = &enchilada_panel_mode,
>> +	},
>> +	{
>> +		.compatible = "samsung,s6e3fc2x01",
>> +		.data = &fajita_panel_mode,
>> +	},
>> +	{ /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, oneplus6_panel_of_match);
>> +
>> +static struct mipi_dsi_driver oneplus6_panel_driver = {
>> +	.probe = oneplus6_panel_probe,
>> +	.remove = oneplus6_panel_remove,
>> +	.driver = {
>> +		.name = "panel-oneplus6",
>> +		.of_match_table = oneplus6_panel_of_match,
>> +	},
>> +};
>> +
>> +module_mipi_dsi_driver(oneplus6_panel_driver);
>> +
>> +MODULE_AUTHOR("Caleb Connolly <caleb@connolly.tech>");
>> +MODULE_DESCRIPTION("DRM driver for Samsung AMOLED DSI panels found in OnePlus 6/6T phones");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.28.0
>>



^ permalink raw reply	[flat|nested] 17+ messages in thread

* [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
       [not found] <20201007171807.285298-1-caleb@connolly.tech>
@ 2020-10-07 17:20 ` Caleb Connolly
  0 siblings, 0 replies; 17+ messages in thread
From: Caleb Connolly @ 2020-10-07 17:20 UTC (permalink / raw)
  To: Akash Asthana, Mukesh Savaliya, Andy Gross, Bjorn Andersson
  Cc: ~postmarketos/upstreaming, Caleb Connolly, linux-i2c,
	linux-arm-msm, linux-kernel

The OnePlus 6/T has the same issues as the c630 causing a crash when DMA
is used for i2c, so disable it.

https://patchwork.kernel.org/patch/11133827/
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index dead5db3315a..50a0674a6553 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -358,7 +358,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 	struct geni_se *se = &gi2c->se;
 	size_t len = msg->len;
 
-	if (!of_machine_is_compatible("lenovo,yoga-c630"))
+	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
+	    !of_machine_is_compatible("oneplus,oneplus6"))
 		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
 
 	if (dma_buf)
@@ -400,7 +401,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 	struct geni_se *se = &gi2c->se;
 	size_t len = msg->len;
 
-	if (!of_machine_is_compatible("lenovo,yoga-c630"))
+	if (!of_machine_is_compatible("lenovo,yoga-c630") &&
+	    !of_machine_is_compatible("oneplus,oneplus6"))
 		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
 
 	if (dma_buf)
-- 
2.28.0



^ permalink raw reply related	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2020-10-19 14:21 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20201007174736.292968-1-caleb@connolly.tech>
2020-10-07 17:49 ` [PATCH 1/5] drm/panel/oneplus6: Add panel-oneplus6 Caleb Connolly
2020-10-18 13:35   ` Sam Ravnborg
2020-10-19 14:21     ` Caleb Connolly
2020-10-07 17:49 ` [PATCH 2/5] dt-bindings: panel: add documentation for oneplus6 panel Caleb Connolly
2020-10-09 14:02   ` Rob Herring
2020-10-09 14:05   ` Rob Herring
2020-10-18 12:33     ` Caleb Connolly
2020-10-07 17:49 ` [PATCH 3/5] arm64: dts: sdm845: add oneplus 6/t devices Caleb Connolly
2020-10-07 17:49 ` [PATCH 4/5] dt-bindings: add vendor bindings for OnePlus Caleb Connolly
2020-10-07 17:49 ` [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6 Caleb Connolly
2020-10-08 10:03   ` Wolfram Sang
2020-10-08 10:46     ` Caleb Connolly
2020-10-08 12:19       ` Wolfram Sang
2020-10-09  6:53     ` Mukesh, Savaliya
2020-10-09  5:26   ` Akash Asthana
2020-10-09  5:58     ` Wolfram Sang
     [not found] <20201007171807.285298-1-caleb@connolly.tech>
2020-10-07 17:20 ` Caleb Connolly

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).