Re: [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver

[Randy Dunlap <rdunlap@infradead.org>]

On 10/8/18 9:29 AM, Pascal PAILLET-LME wrote:
> From: pascal paillet <p.paillet@st.com>
> 
> The stpmic1 PMIC embeds a watchdog which is disabled by default. As soon
> as the watchdog is started, it must be refreshed periodically otherwise
> the PMIC goes off.
> 
> Signed-off-by: pascal paillet <p.paillet@st.com>
> ---
> changes in v3:
> * Rename struct stpmic1_dev by struct stpmic1.
> * Add nowayout module param.
> * Fix set timeout. 
> * Call watchdog_init_timeout so that the timeout can be set in the devicetree.
> * Add email address in MODULE_AUTHOR.
> 
>  drivers/watchdog/Kconfig       |  12 ++++
>  drivers/watchdog/Makefile      |   1 +
>  drivers/watchdog/stpmic1_wdt.c | 138 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 151 insertions(+)
>  create mode 100644 drivers/watchdog/stpmic1_wdt.c

Hi,

> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 5ea8909..985781e 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -806,6 +806,18 @@ config STM32_WATCHDOG
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called stm32_iwdg.
>  
> +config STPMIC1_WATCHDOG
> +	tristate "STPMIC1 PMIC watchdog support"
> +	depends on MFD_STPMIC1
> +	select WATCHDOG_CORE
> +	help
> +	  Say Y here to include watchdog support embedded into STPMIC1 PMIC.
> +	  If the watchdog timer expires, stpmic1 shut-down all its power

	  If the watchdog timer expires, stpmic1 shuts down all its power
or
	  If the watchdog timer expires, stpmic1 will shut down all its power

> +	  supplies.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called spmic1_wdt.
> +
>  config UNIPHIER_WATCHDOG
>  	tristate "UniPhier watchdog support"
>  	depends on ARCH_UNIPHIER || COMPILE_TEST

cheers.
-- 
~Randy