Add node describing Zynq's CAN controller. Signed-off-by: Michal Simek --- arch/arm/boot/dts/zynq-7000.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 366ca6434f54..2287d9b4ed1a 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -71,7 +71,18 @@ interrupts = <0 7 4>; interrupt-parent = <&intc>; clocks = <&clkc 12>; - }; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; gpio0: gpio@e000a000 { compatible = "xlnx,zynq-gpio-1.0"; -- 1.8.2.3