From: Roland Dreier <roland@topspin.com>
To: greg@kroah.com
Cc: linux-kernel@vger.kernel.org, tom.l.nguyen@intel.com
Subject: [PATCH] PCI: Clean up printks in msi.c
Date: Mon, 10 Jan 2005 09:11:26 -0800 [thread overview]
Message-ID: <52sm59yzsx.fsf@topspin.com> (raw)
Add "PCI:" prefixes and fix up the formatting and grammar of printks
in drivers/pci/msi.c. The main motivation was to fix the shouting
"MSI INIT SUCCESS" message printed when an MSI-using driver is first
started, but while we're at it we might as well tidy up all the messages.
Signed-off-by: Roland Dreier <roland@topspin.com>
Index: linux-bk/drivers/pci/msi.c
===================================================================
--- linux-bk.orig/drivers/pci/msi.c 2005-01-10 08:32:50.208912010 -0800
+++ linux-bk/drivers/pci/msi.c 2005-01-10 09:04:04.866314348 -0800
@@ -374,19 +374,19 @@
if ((status = msi_cache_init()) < 0) {
pci_msi_enable = 0;
- printk(KERN_INFO "WARNING: MSI INIT FAILURE\n");
+ printk(KERN_WARNING "PCI: MSI cache init failed\n");
return status;
}
last_alloc_vector = assign_irq_vector(AUTO_ASSIGN);
if (last_alloc_vector < 0) {
pci_msi_enable = 0;
- printk(KERN_INFO "WARNING: ALL VECTORS ARE BUSY\n");
+ printk(KERN_WARNING "PCI: No interrupt vectors available for MSI\n");
status = -EBUSY;
return status;
}
vector_irq[last_alloc_vector] = 0;
nr_released_vectors++;
- printk(KERN_INFO "MSI INIT SUCCESS\n");
+ printk(KERN_INFO "PCI: MSI subsystem initialized\n");
return status;
}
@@ -736,7 +736,9 @@
/* Check whether driver already requested for MSI-X vectors */
if ((pos = pci_find_capability(dev, PCI_CAP_ID_MSIX)) > 0 &&
!msi_lookup_vector(dev, PCI_CAP_ID_MSIX)) {
- printk(KERN_INFO "Can't enable MSI. Device already had MSI-X vectors assigned\n");
+ printk(KERN_INFO "PCI: %s: Can't enable MSI. "
+ "Device already has MSI-X vectors assigned\n",
+ pci_name(dev));
dev->irq = temp;
return -EINVAL;
}
@@ -774,9 +776,9 @@
}
if (entry->msi_attrib.state) {
spin_unlock_irqrestore(&msi_lock, flags);
- printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on vector->%d\n",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
- dev->irq);
+ printk(KERN_WARNING "PCI: %s: pci_disable_msi() called without "
+ "free_irq() on MSI vector %d\n",
+ pci_name(dev), dev->irq);
BUG_ON(entry->msi_attrib.state > 0);
} else {
vector_irq[dev->irq] = 0; /* free it */
@@ -982,7 +984,9 @@
/* Check whether driver already requested for MSI vector */
if (pci_find_capability(dev, PCI_CAP_ID_MSI) > 0 &&
!msi_lookup_vector(dev, PCI_CAP_ID_MSI)) {
- printk(KERN_INFO "Can't enable MSI-X. Device already had MSI vector assigned\n");
+ printk(KERN_INFO "PCI: %s: Can't enable MSI-X. "
+ "Device already has an MSI vector assigned\n",
+ pci_name(dev));
dev->irq = temp;
return -EINVAL;
}
@@ -1050,9 +1054,9 @@
spin_unlock_irqrestore(&msi_lock, flags);
if (warning) {
dev->irq = temp;
- printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on all vectors\n",
- dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn));
+ printk(KERN_WARNING "PCI: %s: pci_disable_msix() called without "
+ "free_irq() on all MSI-X vectors\n",
+ pci_name(dev));
BUG_ON(warning > 0);
} else {
dev->irq = temp;
@@ -1088,9 +1092,9 @@
state = msi_desc[dev->irq]->msi_attrib.state;
spin_unlock_irqrestore(&msi_lock, flags);
if (state) {
- printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on vector->%d\n",
- dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), dev->irq);
+ printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() "
+ "called without free_irq() on MSI vector %d\n",
+ pci_name(dev), dev->irq);
BUG_ON(state > 0);
} else /* Release MSI vector assigned to this device */
msi_free_vector(dev, dev->irq, 0);
@@ -1132,9 +1136,9 @@
iounmap(base);
release_mem_region(phys_addr, PCI_MSIX_ENTRY_SIZE *
multi_msix_capable(control));
- printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on all vectors\n",
- dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn));
+ printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() "
+ "called without free_irq() on all MSI-X vectors\n",
+ pci_name(dev));
BUG_ON(warning > 0);
}
dev->irq = temp; /* Restore IOAPIC IRQ */
next reply other threads:[~2005-01-10 17:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-10 17:11 Roland Dreier [this message]
2005-01-10 17:23 ` [PATCH] PCI: Clean up printks in msi.c Zwane Mwaikambo
2005-01-10 17:31 ` Greg KH
2005-01-10 17:39 ` Roland Dreier
2005-01-12 0:37 ` Greg KH
2005-01-10 18:33 Nguyen, Tom L
2005-01-17 22:01 [PATCH] PCI: pci_ids.h correction for Intel ICH7 - 2.6.10-bk13 Greg KH
2005-01-17 22:01 ` [PATCH] PCI: Clean up printks in msi.c Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52sm59yzsx.fsf@topspin.com \
--to=roland@topspin.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tom.l.nguyen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).