U-Boot 2014.07-rc3-00068-gd8a97f9 (Jun 18 2014 - 11:40:50) CPU : DRA752 ES1.0 Board: DRA7xx I2C: ready DRAM: 1.5 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Card did not respond to voltage select! MMC init failed Using default environment SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading uEnv.txt 805 bytes read in 6 ms (130.9 KiB/s) Loaded environment from Importing environment from mmc0 ... Running uenvcmd ... 4486456 bytes read in 262 ms (16.3 MiB/s) 59512 bytes read in 16 ms (3.5 MiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x447538 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffee000, end 8ffff877 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc2-00004-ge5e2361-dirty (roger@rockdesk) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #314 SMP Thu Jun 26 4 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DRA752 ES1.0 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edb8f000 s13632 r8192 d15040 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 391440 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootwait no_console_suspend [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1524484K/1571840K available (5788K kernel code, 682K rwdata, 2268K rodata, 413K init, 8213K bss, 47356K reserved, 793600K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07e631c (8057 kB) [ 0.000000] .init : 0xc07e7000 - 0xc084e540 ( 414 kB) [ 0.000000] .data : 0xc0850000 - 0xc08fa990 ( 683 kB) [ 0.000000] .bss : 0xc08fa990 - 0xc1100060 (8214 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000366] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000371] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 2796202663936ns [ 0.000382] Switching to timer-based delay loop [ 0.001396] Console: colour dummy device 80x30 [ 0.001423] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001434] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001445] ... MAX_LOCK_DEPTH: 48 [ 0.001456] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001466] ... CLASSHASH_SIZE: 4096 [ 0.001476] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001486] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001496] ... CHAINHASH_SIZE: 32768 [ 0.001506] memory used by lock dependency info: 5167 kB [ 0.001516] per task-struct memory footprint: 1152 bytes [ 0.001549] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.001569] pid_max: default: 32768 minimum: 301 [ 0.001892] Security Framework initialized [ 0.002006] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003647] CPU: Testing write buffer coherency: ok [ 0.004403] /cpus/cpu@0 missing clock-frequency property [ 0.004440] /cpus/cpu@1 missing clock-frequency property [ 0.004455] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004511] Setting up static identity map for 0x8057c270 - 0x8057c2e0 [ 0.008435] CPU1: Booted secondary processor [ 0.008472] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008891] Brought up 2 CPUs [ 0.008910] SMP: Total of 2 processors activated. [ 0.008922] CPU: All CPU(s) started in SVC mode. [ 0.010899] devtmpfs: initialized [ 0.020269] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.020363] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.110310] omap_hwmod: dss_core: _wait_target_disable failed [ 0.110329] omap_hwmod: dss_core: cannot be enabled for reset (3) [ 0.112891] omap_hwmod: dss_dispc: cannot be enabled for reset (3) [ 0.115442] omap_hwmod: dss_hdmi: cannot be enabled for reset (3) [ 0.183892] pinctrl core: initialized pinctrl subsystem [ 0.185718] regulator-dummy: no parameters [ 0.229451] NET: Registered protocol family 16 [ 0.233437] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.237354] omap_l3_noc 44000000.ocp: L3 debug error: target 2 mod:1 (unclearable) [ 0.237409] omap_l3_noc 44000000.ocp: L3 application error: target 2 mod:1 (unclearable) [ 0.241772] OMAP GPIO hardware version 0.1 [ 0.256662] platform 4e000000.dmm: Cannot lookup hwmod 'dmm' [ 0.261143] ------------[ cut here ]------------ [ 0.261167] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:277 irq_domain_associate+0x150/0x1b8() [ 0.261179] error: hwirq 0x177 is too large for GIC [ 0.261190] Modules linked in: [ 0.261210] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc2-00004-ge5e2361-dirty #314 [ 0.261242] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.261265] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.261284] [] (dump_stack) from [] (warn_slowpath_common+0x6c/0x90) [ 0.261299] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.261316] [] (warn_slowpath_fmt) from [] (irq_domain_associate+0x150/0x1b8) [ 0.261332] [] (irq_domain_associate) from [] (irq_create_mapping+0x6c/0xfc) [ 0.261348] [] (irq_create_mapping) from [] (irq_create_of_mapping+0x78/0x10c) [ 0.261365] [] (irq_create_of_mapping) from [] (irq_of_parse_and_map+0x24/0x2c) [ 0.261381] [] (irq_of_parse_and_map) from [] (of_irq_to_resource+0x18/0xac) [ 0.261395] [] (of_irq_to_resource) from [] (of_irq_to_resource_table+0x38/0x4c) [ 0.261414] [] (of_irq_to_resource_table) from [] (of_device_alloc+0xd4/0x140) [ 0.261432] [] (of_device_alloc) from [] (of_platform_device_create_pdata+0x4c/0x10c) [ 0.261451] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x164) [ 0.261468] [] (of_platform_bus_create) from [] (of_platform_bus_create+0x13c/0x164) [ 0.261486] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0x9c) [ 0.261505] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.261522] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.261538] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.261554] [] (customize_machine) from [] (do_one_initcall+0x80/0x1c0) [ 0.261570] [] (do_one_initcall) from [] (kernel_init_freeable+0xfc/0x1cc) [ 0.261585] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xec) [ 0.261601] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.261659] ---[ end trace 1536df6d8ccf88e1 ]--- [ 0.265579] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/pinmux@4a003400/nand_flash_x16, deferring probe [ 0.265606] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral [ 0.266437] No ATAGs? [ 0.266496] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.266521] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.268614] OMAP DMA hardware revision 0.0 [ 0.313363] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.313408] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.340055] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.341013] mmc2_3v3: 3300 mV [ 0.343871] SCSI subsystem initialized [ 0.347063] usbcore: registered new interface driver usbfs [ 0.347198] usbcore: registered new interface driver hub [ 0.347460] usbcore: registered new device driver usb [ 0.348182] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a003400/pinmux_i2c1_pins, deferring probe [ 0.348209] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.348262] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a003400/pinmux_i2c2_pins, deferring probe [ 0.348285] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 0.348336] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a003400/pinmux_i2c3_pins, deferring probe [ 0.348359] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.348543] pps_core: LinuxPPS API ver. 1 registered [ 0.348555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.348608] PTP clock support registered [ 0.351407] Switched to clocksource arch_sys_counter [ 0.452979] NET: Registered protocol family 2 [ 0.454225] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.454421] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.456738] TCP: Hash tables configured (established 8192 bind 8192) [ 0.456840] TCP: reno registered [ 0.456879] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.457192] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.458143] NET: Registered protocol family 1 [ 0.458904] RPC: Registered named UNIX socket transport module. [ 0.458933] RPC: Registered udp transport module. [ 0.458946] RPC: Registered tcp transport module. [ 0.458959] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.463640] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.466547] VFS: Disk quotas dquot_6.5.2 [ 0.466645] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.468127] NFS: Registering the id_resolver key type [ 0.468334] Key type id_resolver registered [ 0.468361] Key type id_legacy registered [ 0.468451] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 0.468878] msgmni has been set to 1459 [ 0.470645] bounce: pool size: 64 pages [ 0.470695] io scheduler noop registered [ 0.470714] io scheduler deadline registered [ 0.470788] io scheduler cfq registered (default) [ 0.473600] platform 4a084000.phy: Driver omap-usb2 requests probe deferral [ 0.475444] platform 4a084400.phy: Driver ti-pipe3 requests probe deferral [ 0.476200] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124 [ 0.478832] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 0.481843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.486403] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.486704] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 1.529459] console [ttyO0] enabled [ 1.534260] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.540316] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 1.551188] omap_uart 48020000.serial: no wakeirq for uart0 [ 1.557230] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.583669] brd: module loaded [ 1.596226] loop: module loaded [ 1.601789] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.613120] usbcore: registered new interface driver asix [ 1.618878] usbcore: registered new interface driver ax88179_178a [ 1.625395] usbcore: registered new interface driver cdc_ether [ 1.631659] usbcore: registered new interface driver smsc95xx [ 1.637771] usbcore: registered new interface driver net1080 [ 1.643814] usbcore: registered new interface driver cdc_subset [ 1.650104] usbcore: registered new interface driver zaurus [ 1.656100] usbcore: registered new interface driver cdc_ncm [ 1.662587] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.669428] ehci-omap: OMAP-EHCI Host Controller driver [ 1.675257] usbcore: registered new interface driver cdc_wdm [ 1.681341] usbcore: registered new interface driver usb-storage [ 1.688961] mousedev: PS/2 mouse device common for all mice [ 1.697124] i2c /dev entries driver [ 1.700834] Driver for 1-wire Dallas network protocol. [ 1.708330] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.715371] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.723422] omap_hsmmc 480b4000.mmc: pins are not configured from the driver [ 1.761861] ledtrig-cpu: registered to indicate activity on CPUs [ 1.768782] usbcore: registered new interface driver usbhid [ 1.774722] usbhid: USB HID core driver [ 1.779898] oprofile: no performance counters [ 1.785133] oprofile: using timer interrupt. [ 1.790029] TCP: cubic registered [ 1.793589] Initializing XFRM netlink socket [ 1.798155] NET: Registered protocol family 17 [ 1.802911] NET: Registered protocol family 15 [ 1.807739] Key type dns_resolver registered [ 1.812363] omap_voltage_late_init: Voltage driver support not added [ 1.819597] ThumbEE CPU extension supported. [ 1.824110] Registering SWP/SWPB emulation handler [ 1.831610] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 1.837074] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x10000000 [ 1.844734] nand: No NAND device found [ 1.848675] nand device scan failed, may be bus-width mismatch [ 1.858887] palmas 0-0058: IRQ missing: skipping irq request [ 1.865780] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 1.874692] smps123: 850 <--> 1250 mV at 1060 mV [ 1.881926] smps45: 850 <--> 1150 mV at 1060 mV [ 1.888930] smps6: 850 <--> 1650 mV at 1060 mV [ 1.895664] smps7: 850 <--> 1030 mV at 1030 mV [ 1.902748] smps8: 850 <--> 1250 mV at 1060 mV [ 1.909475] smps9: 1800 mV [ 1.914302] ldo1: 1800 <--> 3300 mV at 3000 mV [ 1.921215] ldo2: 3300 mV [ 1.926220] ldo3: 1800 mV [ 1.930338] LDO4: at 1800 mV [ 1.934495] LDO5: no parameters [ 1.938753] LDO6: no parameters [ 1.943050] LDO7: no parameters [ 1.947282] LDO8: no parameters [ 1.952530] ldo9: 1050 mV [ 1.957511] ldoln: 1800 mV [ 1.962569] ldousb: 3300 mV [ 1.966598] REGEN1: no parameters [ 1.970470] REGEN2: no parameters [ 1.974461] REGEN3: no parameters [ 1.978330] SYSEN1: no parameters [ 1.982263] SYSEN2: no parameters [ 1.985980] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.993257] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 2.000159] omap_i2c 48060000.i2c: bus 2 rev0.12 at 3400 kHz [ 2.011089] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.052610] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.097991] ldousb: disabling [ 2.101782] ldo9: disabling [ 2.105499] ldo3: disabling [ 2.109110] ldo2: disabling [ 2.116071] mmc2_3v3: disabling [ 2.121479] Waiting for root device /dev/mmcblk0p2... [ 2.193400] mmc1: host does not support reading read-only switch. assuming write-enable. [ 2.205541] mmc1: new high speed SD card at address e624 [ 2.212654] mmcblk0: mmc1:e624 SU02G 1.84 GiB [ 2.221583] mmcblk0: p1 p2 [ 2.232849] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.243777] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.274866] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended [ 2.292951] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.301521] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.317827] devtmpfs: mounted [ 2.321292] Freeing unused kernel memory: 412K (c07e7000 - c084e000) INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 3.492137] udevd[916]: starting version 175 . ok [....] Synthesizing the initial hotplug events...done. [....] Waiting for /dev to be fully populated...[ 4.537456] ti-pipe3 4a084400.phy: enabled regulator [ 4.744070] omap-usb2 4a084000.phy: enabled regulator [ 5.049426] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.057375] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 5.066526] xhci-hcd xhci-hcd.0.auto: irq 110, io mem 0x488d0000 [ 5.074147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.081305] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.088897] usb usb1: Product: xHCI Host Controller [ 5.094030] usb usb1: Manufacturer: Linux 3.16.0-rc2-00004-ge5e2361-dirty xhci-hcd [ 5.101966] usb usb1: SerialNumber: xhci-hcd.0.auto [ 5.111032] hub 1-0:1.0: USB hub found [ 5.115489] hub 1-0:1.0: 1 port detected [ 5.122317] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.128991] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 5.137507] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.144660] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.152252] usb usb2: Product: xHCI Host Controller [ 5.157351] usb usb2: Manufacturer: Linux 3.16.0-rc2-00004-ge5e2361-dirty xhci-hcd [ 5.165289] usb usb2: SerialNumber: xhci-hcd.0.auto [ 5.172385] hub 2-0:1.0: USB hub found [ 5.176374] hub 2-0:1.0: 1 port detected done. [....] Setting parameters of disc: (none). ok [....] Activating swap...done. [ 6.146184] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp. ok [ 6.450302] random: nonblocking pool is initialized [....] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.20.1 done. [....] Mounting local filesystems...done. [....] Activating swapfile swap...done. [....] Cleaning up temporary files.... ok [....] Cleaning up temporary files.... ok [....] Setting up ALSA...done (none loaded). [....] Setting kernel variables ...done. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux 7.0 rockdesk ttyO0 rockdesk login: