From: Kishon Vijay Abraham I <kishon@ti.com>
To: Zhangfei Gao <zhangfei.gao@linaro.org>, <arnd@arndb.de>,
<mark.rutland@arm.com>, <haifeng.yan@linaro.org>,
<jchxue@gmail.com>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>,
Jiancheng Xue <xuejiancheng@huawei.com>
Subject: Re: [PATCH v2 2/2] phy: add hix5hd2-sata-phy driver
Date: Wed, 2 Jul 2014 16:56:26 +0530 [thread overview]
Message-ID: <53B3EC62.80202@ti.com> (raw)
In-Reply-To: <53B3EC18.5020509@ti.com>
Hi,
On Wednesday 02 July 2014 04:55 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Wednesday 25 June 2014 02:44 PM, Zhangfei Gao wrote:
>> From: Jiancheng Xue <xuejiancheng@huawei.com>
>>
>> Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc.
>>
>> Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>> ---
>> drivers/phy/Kconfig | 8 ++
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-hix5hd2-sata.c | 192 ++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 201 insertions(+)
>> create mode 100644 drivers/phy/phy-hix5hd2-sata.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 16a2f06..782953d 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -109,6 +109,14 @@ config PHY_EXYNOS5250_SATA
>> SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
>> port to accept one SATA device.
>>
>> +config PHY_HIX5HD2_SATA
>> + tristate "HIX5HD2 SATA PHY Driver"
>> + depends on ARCH_HIX5HD2 && OF
>
> depends on HAS_IOMEM?
>> + select GENERIC_PHY
>> + select MFD_SYSCON
>> + help
>> + Support for SATA PHY on Hisilicon hix5hd2 Soc.
>> +
>> config PHY_SUN4I_USB
>> tristate "Allwinner sunxi SoC USB PHY driver"
>> depends on ARCH_SUNXI && HAS_IOMEM && OF
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index b4f1d57..54f04d0 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
>> obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
>> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
>> obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
>> +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
>> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
>> obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
>> phy-exynos-usb2-y += phy-samsung-usb2.o
>> diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c
>> new file mode 100644
>> index 0000000..6f1e3ea
>> --- /dev/null
>> +++ b/drivers/phy/phy-hix5hd2-sata.c
>> @@ -0,0 +1,192 @@
>> +/*
>> + * Copyright (c) 2014 Linaro Ltd.
>> + * Copyright (c) 2014 Hisilicon Limited.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/io.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>
> can this be arranged alphabetically? Helps while adding new header files.
>> +
>> +#define SATA_PHY0_CTLL 0xa0
>> +#define MPLL_MULTIPLIER_SHIFT 1
>> +#define MPLL_MULTIPLIER_MASK 0xfe
>> +#define MPLL_MULTIPLIER_50M 0x3c
>> +#define MPLL_MULTIPLIER_100M 0x1e
>> +#define PHY_RESET BIT(0)
>> +#define REF_SSP_EN BIT(9)
>> +#define SSC_EN BIT(10)
>> +#define REF_USE_PAD BIT(23)
>> +
>> +#define SATA_PORT_PHYCTL 0x174
>> +#define SPEED_MODE_MASK 0x6f0000
>> +#define HALF_RATE_SHIFT 16
>> +#define PHY_CONFIG_SHIFT 18
>> +#define GEN2_EN_SHIFT 21
>> +#define SPEED_CTRL BIT(20)
>> +
>> +#define SATA_PORT_PHYCTL1 0x148
>> +#define AMPLITUDE_MASK 0x3ffffe
>> +#define AMPLITUDE_GEN3 0x68
>> +#define AMPLITUDE_GEN3_SHIFT 15
>> +#define AMPLITUDE_GEN2 0x56
>> +#define AMPLITUDE_GEN2_SHIFT 8
>> +#define AMPLITUDE_GEN1 0x56
>> +#define AMPLITUDE_GEN1_SHIFT 1
>> +
> .
> .
> <snip>
> .
> .
>> +
>> +static int hix5hd2_sata_phy_probe(struct platform_device *pdev)
>> +{
>> + struct phy_provider *phy_provider;
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + struct phy *phy;
>> + struct hix5hd2_priv *priv;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + priv->base = devm_ioremap(dev, res->start, resource_size(res));
It should be devm_ioremap_resource().
-Kishon
>> + if (!priv->base)
>> + return -ENOMEM;
>> +
>> + priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
>> + "hisilicon,peripheral-syscon");
>> + if (IS_ERR(priv->peri_ctrl))
>> + priv->peri_ctrl = NULL;
>
> if syscon_regmap_lookup_by_phandle returns EPROBE_DEFER, you have to return
> EPROBE_DEFER no?
>
> Rest looks fine to me.
>
> Thanks
> Kishon
>
next prev parent reply other threads:[~2014-07-02 11:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 9:14 [PATCH v2 0/2] phy: add hix5hd2-sata-phy driver Zhangfei Gao
2014-06-25 9:14 ` [PATCH v2 1/2] Documentation: Document Hisilicon hix5hd2 sata PHY Zhangfei Gao
2014-06-25 12:16 ` Arnd Bergmann
2014-06-25 12:41 ` zhangfei
2014-06-25 13:32 ` Arnd Bergmann
2014-06-26 13:48 ` zhangfei
2014-06-26 20:53 ` Arnd Bergmann
2014-06-27 3:37 ` zhangfei
2014-06-27 7:50 ` Arnd Bergmann
2014-07-02 11:20 ` Kishon Vijay Abraham I
2014-06-25 9:14 ` [PATCH v2 2/2] phy: add hix5hd2-sata-phy driver Zhangfei Gao
2014-07-02 11:25 ` Kishon Vijay Abraham I
2014-07-02 11:26 ` Kishon Vijay Abraham I [this message]
2014-07-02 15:19 ` zhangfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53B3EC62.80202@ti.com \
--to=kishon@ti.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=haifeng.yan@linaro.org \
--cc=jchxue@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=xuejiancheng@huawei.com \
--cc=zhangfei.gao@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).