linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: <jacek.anaszewski@gmail.com>, <linux-leds@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v20 00/17] Multicolor Framework (array edition)
Date: Mon, 27 Apr 2020 14:05:30 -0500	[thread overview]
Message-ID: <53d45397-dca4-7426-bcd9-1d253689a8dc@ti.com> (raw)
In-Reply-To: <cc2425aa-2f9e-98eb-a161-51a910659987@ti.com>

Pavel

On 4/27/20 12:18 PM, Dan Murphy wrote:
> Pavel
>
> On 4/25/20 3:48 PM, Pavel Machek wrote:
>> Hi!
>>
>>> This is the multi color LED framework. This framework presents 
>>> clustered
>>> colored LEDs into an array and allows the user space to adjust the 
>>> brightness
>>> of the cluster using a single file write.  The individual colored LEDs
>>> intensities are controlled via a single file that is an array of
>>> LEDs
>> Thanks for the series.
>
> Thank you for taking the time to review this series.  I would prefer 
> them to all go in at the same time as the LP50xx and LP55xx devices 
> were tested incrementally and together as a full series.
>
> I need to check back a few series patches 8->10 may have acks from 
> maintainers but may have gotten lost.  If I find the maintainer ack I 
> will post the URL where they ack'd it if not I will ask the maintainer 
> for their review and ACK.
>
> Dan
>
>>
>> I believe 6/, 11/, 15/, 16/ could be applied now. Should I do that?
>>
>> 8..10/ might be ready, too... but I'm not relevant maintainer, so
>> you'll need to push them separately. I added my acks.
>>
8 was acked by the maintainer 9/10/11 were not.

I should be able to post v21 tomorrow.  Just need to finish making 
changes and test them

Dan


>> Best regards,
>>                                     Pavel

      reply	other threads:[~2020-04-27 19:11 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-23 15:55 [PATCH v20 00/17] Multicolor Framework (array edition) Dan Murphy
2020-04-23 15:55 ` [PATCH v20 01/17] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
2020-04-23 15:55 ` [PATCH v20 02/17] leds: Add multicolor ID to the color ID list Dan Murphy
2020-04-25 19:52   ` Pavel Machek
2020-04-27 17:12     ` Dan Murphy
2020-04-28  8:43       ` Pavel Machek
2020-04-28 12:02         ` Dan Murphy
2020-04-23 15:55 ` [PATCH v20 03/17] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2020-04-25 19:53   ` Pavel Machek
2020-04-27 17:12     ` Dan Murphy
2020-04-25 20:23   ` Pavel Machek
2020-04-26 16:24     ` Jacek Anaszewski
2020-04-26 19:48       ` Pavel Machek
2020-04-27 19:33     ` Dan Murphy
2020-04-28  8:41       ` Pavel Machek
2020-04-26 16:46   ` Jacek Anaszewski
2020-04-23 15:55 ` [PATCH v20 04/17] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2020-04-25 20:24   ` Pavel Machek
2020-04-27 19:02     ` Dan Murphy
2020-04-23 15:55 ` [PATCH v20 05/17] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2020-04-23 15:55 ` [PATCH v20 06/17] dt: bindings: lp55xx: Be consistent in the document with LED acronym Dan Murphy
2020-04-23 15:55 ` [PATCH v20 07/17] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
2020-04-23 15:55 ` [PATCH v20 08/17] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2020-04-23 15:55 ` [PATCH v20 09/17] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2020-04-25 20:31   ` Pavel Machek
2020-04-23 15:55 ` [PATCH v20 10/17] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
2020-04-27 19:06   ` Dan Murphy
2020-04-23 15:55 ` [PATCH v20 11/17] leds: lp55xx: Convert LED class registration to devm_* Dan Murphy
2020-04-23 15:55 ` [PATCH v20 12/17] leds: lp55xx: Add multicolor framework support to lp55xx Dan Murphy
2020-04-25 20:37   ` Pavel Machek
2020-04-26 16:07   ` Jacek Anaszewski
2020-04-27 18:17     ` Dan Murphy
2020-04-27 19:42       ` Jacek Anaszewski
2020-04-27 19:58         ` Dan Murphy
2020-04-23 15:55 ` [PATCH v20 13/17] leds: lp5523: Update the lp5523 code to add multicolor brightness function Dan Murphy
2020-04-25 20:38   ` Pavel Machek
2020-04-23 15:55 ` [PATCH v20 14/17] leds: lp5521: Add multicolor framework multicolor brightness support Dan Murphy
2020-04-25 20:39   ` Pavel Machek
2020-04-23 15:55 ` [PATCH v20 15/17] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
2020-04-23 15:55 ` [PATCH v20 16/17] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
2020-04-23 15:55 ` [PATCH v20 17/17] dt: bindings: Update lp55xx binding to recommended LED naming Dan Murphy
2020-04-25 20:48 ` [PATCH v20 00/17] Multicolor Framework (array edition) Pavel Machek
2020-04-27 17:18   ` Dan Murphy
2020-04-27 19:05     ` Dan Murphy [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53d45397-dca4-7426-bcd9-1d253689a8dc@ti.com \
    --to=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).