Hi,

On 05/09/14 07:48, Xiubo Li wrote:
> Some Freescale SoCs, there has an DVI/HDMI controller and a PHY,
> attached to one of their display controller unit's LCDC interfaces.
> This patch adds a preliminary static support for such controllers.
> 
> This will support for many modes and a dynamic switching between
> them.
> 
> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
> ---
>  .../devicetree/bindings/video/fsl-sii902x.txt      |  17 +
>  drivers/video/fbdev/Kconfig                        |   7 +
>  drivers/video/fbdev/Makefile                       |   1 +
>  drivers/video/fbdev/fsl-sii902x.c                  | 526 +++++++++++++++++++++
>  4 files changed, 551 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/fsl-sii902x.txt
>  create mode 100644 drivers/video/fbdev/fsl-sii902x.c

I don't know how you picked the names of the people you sent this patch
to, but looks to me that most of them are probably not interested in
this patch.

Anyway, a few quick comments on the patch:

- You should probably use regmap instead of direct i2c calls.
Interestingly, you define regmap variable, but you never use it.
- Use defines for register offsets, instead of magic numbers.
- You should not use static variables. They prevent having multiple
instances of the device.

So the SiI902x chip is on the SoC, not on the board? And it's a plain
standard SiI902x in other aspects?

 Tomi