From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759058AbaKAPnt (ORCPT ); Sat, 1 Nov 2014 11:43:49 -0400 Received: from cantor2.suse.de ([195.135.220.15]:54712 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751626AbaKAPnq (ORCPT ); Sat, 1 Nov 2014 11:43:46 -0400 Message-ID: <5454FFAC.2040500@suse.de> Date: Sat, 01 Nov 2014 16:43:40 +0100 From: =?UTF-8?B?QW5kcmVhcyBGw6RyYmVy?= Organization: SUSE LINUX Products GmbH User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.1.0 MIME-Version: 1.0 To: Georgi Djakov CC: Bjorn Andersson , Kumar Gala , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Russell King , "devicetree@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , "linux-kernel@vger.kernel.org" , linux-arm-msm , "Ivan T. Ivanov" , Srinivas Kandagatla Subject: Re: [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform References: <1409672443-4289-1-git-send-email-gdjakov@mm-sol.com> <1409672443-4289-4-git-send-email-gdjakov@mm-sol.com> <543D4C87.9050703@mm-sol.com> In-Reply-To: <543D4C87.9050703@mm-sol.com> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Georgi, Am 14.10.2014 um 18:17 schrieb Georgi Djakov: > On 10/10/2014 08:14 PM, Bjorn Andersson wrote: >> On Tue, Sep 2, 2014 at 8:40 AM, Georgi Djakov wrote: >>> Enable support for the two SD host controllers on the APQ8084 platform >>> by adding the required nodes to the DT files. >>> On the IFC6540 board, the first controller is connected to the onboard >>> eMMC and the second is connected to a micro-SD card slot. >>> >>> Signed-off-by: Georgi Djakov [...] >>> --- >>> arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 11 +++++++++++ >>> arch/arm/boot/dts/qcom-apq8084.dtsi | 23 +++++++++++++++++++++++ >>> 2 files changed, 34 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts >>> index e41cb8a..c9ff108 100644 >>> --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts >>> +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts >> [..] >>> + sdhci@f98a4900 { >>> + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; >>> + bus-width = <4>; >> >> ...why do you add this node and leave it disabled in the dts? >> > > Hi Bjorn, > Currently only the eMMC is functional on this board, so now we > have just the board specific configuration under this node. > More patches are forthcoming. Any update on this? This still seems to be the latest IFC6540 commit: https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/commit/66c04e30f4a6e6ed998a6c154a6c45b3cd5b3fde Following the instructions in https://wiki.linaro.org/Boards/IFC6540 I've tried to pass a full rootfs as ramdisk parameter (fastboot boot -c "console=ttyMSM0,115200,n8 rw rootwait" -b 0x0 zImage-ifc6540 initrd.cpio.gz), but I then get: [258660] fastboot: download:12738800 [268150] fastboot: boot [268150] kernel/ramdisk addresses overlap with aboot addresses. Booting without ramdisk specified works, but for lack of SD, USB and network support I then have no root. So, do you have any new insights on why 'status = "okay";' doesn't work for the above sdhci node? Or do you have a working config you can share for creating a non-overlapping abootimg? Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg