linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Hogan <james.hogan@imgtec.com>
To: Guenter Roeck <linux@roeck-us.net>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
	<linux-next@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Andy Lutomirski <luto@amacapital.net>,
	<linux-metag@vger.kernel.org>
Subject: Re: linux-next: Tree for Dec 16
Date: Tue, 16 Dec 2014 10:45:49 +0000	[thread overview]
Message-ID: <54900D5D.4060509@imgtec.com> (raw)
In-Reply-To: <548FFEA0.1060905@imgtec.com>

[-- Attachment #1: Type: text/plain, Size: 3750 bytes --]

On 16/12/14 09:42, James Hogan wrote:
> On 16/12/14 06:55, Guenter Roeck wrote:
>> On 12/15/2014 10:44 PM, Andrew Morton wrote:
>>> On Mon, 15 Dec 2014 22:35:49 -0800 Guenter Roeck <linux@roeck-us.net>
>>> wrote:
>>>
>>>> On Tue, Dec 16, 2014 at 03:46:22PM +1100, Stephen Rothwell wrote:
>>>>> Hi all,
>>>>>
>>>>> Please do not add any code destined for v3.20 to your linux-next
>>>>> included
>>>>> trees/branches until after v3.19-rc1 is released.
>>>>>
>>>>> Changes since 20141215:
>>>>>
>>>>> The infiniband tree gained a conflict against Linus' tree and a build
>>>>> failure so I used the version from next-20141215.
>>>>>
>>>>> The userns tree gained a conflict against the vfs tree.
>>>>>
>>>>> The clk tree gained a build failure so I used the version from
>>>>> next-20141215.
>>>>>
>>>>> Non-merge commits (relative to Linus' tree): 3588
>>>>>   2582 files changed, 123494 insertions(+), 135748 deletions(-)
>>>>>
>>>>
>>>> My metag buildbot test fails with this kernel.
>>>
>>> Thanks.  What are the error messages?
>>>
>>>
>> Nothing. It just hangs until killed.
>>
>> qemu log:
>> char device redirected to /dev/pts/5
>> Unable to load ROM!
>> qemu: terminating on signal 15 from pid 17843
>>
>> http://server.roeck-us.net:8010/builders/qemu-metag-next/builds/60/steps/qemubuildcommand/logs/stdio
> 
> Thanks a lot Guenter for report and bisection. I've confirmed on real
> hardware too. I'll try debugging it.

The fmt in the first printk gets corrupted and causes a memory fault
because the stack isn't 64-bit aligned. The args get saved with a 64-bit
store (but unaligned access checking isn't turned on yet so this
silently does the wrong thing), and then read as 1 with a 32-bit load.

Enabling unaligned access checking from boot makes it fail at
metag_start_kernel, immediately after stack pointer is set to
init_thread_union + THREAD_INFO_SIZE. Basically the restart_block was
the only thing keeping the struct thread_info as a whole 64-bit aligned
on Meta.

The patch below fixes it. Please can it be squashed into commit "all
arches, signal: move restart_block to struct task_struct".

Thanks
James

From 3ec117304ebde939fd181129227de28c068e7fa2 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Tue, 16 Dec 2014 10:15:33 +0000
Subject: [PATCH] metag: Align thread_info::supervisor_stack

Commit a82be12232dc ("all arches, signal: move restart_block to struct
task_struct") removed restart_block from struct thread_info which was
the only thing keeping supervisor_stack and the struct as a whole 64-bit
aligned. This resulted in the initial stack pointer not being 64-bit
aligned, so when arguments are saved to the stack with a 64-bit SETL
instruction the values are corrupted resulting in a pretty early
unserviced memory fault in printk.

This is fixed by explicitly aligning supervisor_stack to 8 bytes.

Fixes: a82be12232dc ("all arches, signal: move restart_block to struct task_struct")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/metag/include/asm/thread_info.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/metag/include/asm/thread_info.h b/arch/metag/include/asm/thread_info.h
index ff4332435d15..afb3ca4776d1 100644
--- a/arch/metag/include/asm/thread_info.h
+++ b/arch/metag/include/asm/thread_info.h
@@ -36,7 +36,7 @@ struct thread_info {
 
 	mm_segment_t addr_limit;	/* thread address space */
 
-	u8 supervisor_stack[0];
+	u8 supervisor_stack[0] __aligned(8);
 };
 
 #else /* !__ASSEMBLY__ */
-- 
2.0.4


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2014-12-16 10:46 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-16  4:46 linux-next: Tree for Dec 16 Stephen Rothwell
2014-12-16  6:35 ` Guenter Roeck
2014-12-16  6:44   ` Andrew Morton
2014-12-16  6:55     ` Guenter Roeck
2014-12-16  9:42       ` James Hogan
2014-12-16 10:45         ` James Hogan [this message]
2014-12-16 23:57           ` Stephen Rothwell
2014-12-17  0:08             ` Andrew Morton
2014-12-17  0:23               ` Stephen Rothwell
  -- strict thread matches above, loose matches on Subject: below --
2022-12-16  1:46 Stephen Rothwell
2020-12-16  9:40 Stephen Rothwell
2019-12-16  5:22 Stephen Rothwell
2016-12-16  3:49 Stephen Rothwell
2015-12-16  5:43 Stephen Rothwell
2013-12-16  5:59 Stephen Rothwell
2011-12-16  6:00 Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54900D5D.4060509@imgtec.com \
    --to=james.hogan@imgtec.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-metag@vger.kernel.org \
    --cc=linux-next@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luto@amacapital.net \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).