From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751648AbbCIMTi (ORCPT ); Mon, 9 Mar 2015 08:19:38 -0400 Received: from mailout3.w1.samsung.com ([210.118.77.13]:62326 "EHLO mailout3.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750898AbbCIMTg (ORCPT ); Mon, 9 Mar 2015 08:19:36 -0400 X-AuditID: cbfec7f5-b7fc86d0000066b7-cb-54fd8f3f2c8e Message-id: <54FD8FD4.2010305@samsung.com> Date: Mon, 09 Mar 2015 13:19:32 +0100 From: Jacek Anaszewski User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130804 Thunderbird/17.0.8 MIME-version: 1.0 To: Sakari Ailus Cc: linux-leds@vger.kernel.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, kyungmin.park@samsung.com, pavel@ucw.cz, cooloney@gmail.com, rpurdie@rpsys.net, s.nawrocki@samsung.com, Andrzej Hajda , Lee Jones , Chanwoo Choi Subject: Re: [PATCH/RFC v12 10/19] DT: Add documentation for the mfd Maxim max77693 References: <1425485680-8417-1-git-send-email-j.anaszewski@samsung.com> <1425485680-8417-11-git-send-email-j.anaszewski@samsung.com> <20150309105404.GC11954@valkosipuli.retiisi.org.uk> In-reply-to: <20150309105404.GC11954@valkosipuli.retiisi.org.uk> Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFnrGLMWRmVeSWpSXmKPExsVy+t/xq7r2/X9DDL5vMbW4te4cq8XRnROZ LK5/ec5qMf8IkHu26Q27xf2vRxktLu+aw2ax9c06RoueDVtZLe6eOspmsXvXU1aLw2/aWS3O 7F/J5sDrsXPWXXaPw18XsnjcubaHzWPP/B+sHn1bVjF6rFj9nd3j8ya5APYoLpuU1JzMstQi fbsErozbp06yF/SrV/S3bGVvYLwo38XIySEhYCLxfeFCVghbTOLCvfVsXYxcHEICSxkl7hz5 ygiSEBL4yCgxeUItiM0roCXxpHE/O4jNIqAqcW3mcjCbTcBQ4ueL10wgtqhAhMSf0/tYIeoF JX5MvscCYosIqEk83fSQBWQBs8AVJok5p7aCJYQFQiV+9N1ihli2h1Fiyw8uEJtTwEFiTu9q sAXMAtYSKydtY4Sw5SU2r3nLPIFRYBaSHbOQlM1CUraAkXkVo2hqaXJBcVJ6rpFecWJucWle ul5yfu4mRkjcfN3BuPSY1SFGAQ5GJR7ehoq/IUKsiWXFlbmHGCU4mJVEeGM6gUK8KYmVValF +fFFpTmpxYcYmTg4pRoYz/ix22yYMW0SU1BZltbF873ey/6tzD1du1KP5YIJl6fsZoGAW21l b9auDXOpdZVdzh6ZeS/o1wxO5Q0pf57t+rWRV2LD5dJwTiMl79kOd7ScD8W0iatMqKyo1bWK Y9JWkDBadDpjX7h1FZfqlkvFUvZOss+mnuu+ZfK9UEhgW1Z0adaWd75KLMUZiYZazEXFiQC1 SZ0leQIAAA== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Sakari, Thanks for the review. On 03/09/2015 11:54 AM, Sakari Ailus wrote: > Hi Jacek, > > On Wed, Mar 04, 2015 at 05:14:31PM +0100, Jacek Anaszewski wrote: >> This patch adds device tree binding documentation for >> the flash cell of the Maxim max77693 multifunctional device. >> >> Signed-off-by: Jacek Anaszewski >> Signed-off-by: Andrzej Hajda >> Acked-by: Kyungmin Park >> Cc: Lee Jones >> Cc: Chanwoo Choi >> Cc: Bryan Wu >> Cc: Richard Purdie >> --- >> Documentation/devicetree/bindings/mfd/max77693.txt | 61 ++++++++++++++++++++ >> 1 file changed, 61 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt >> index 38e6440..ab8fbd5 100644 >> --- a/Documentation/devicetree/bindings/mfd/max77693.txt >> +++ b/Documentation/devicetree/bindings/mfd/max77693.txt >> @@ -76,7 +76,53 @@ Optional properties: >> Valid values: 4300000, 4700000, 4800000, 4900000 >> Default: 4300000 >> >> +- led : the LED submodule device node >> + >> +There are two LED outputs available - FLED1 and FLED2. Each of them can >> +control a separate LED or they can be connected together to double >> +the maximum current for a single connected LED. One LED is represented >> +by one child node. >> + >> +Required properties: >> +- compatible : Must be "maxim,max77693-led". >> + >> +Optional properties: >> +- maxim,trigger-type : Flash trigger type. >> + Possible trigger types: >> + LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal triggers >> + the flash, >> + LEDS_TRIG_TYPE_LEVEL (1) - Strobe pulse length controls duration >> + of the flash. >> +- maxim,boost-mode : >> + In boost mode the device can produce up to 1.2A of total current >> + on both outputs. The maximum current on each output is reduced >> + to 625mA then. If not enabled explicitly, boost setting defaults to >> + LEDS_BOOST_FIXED in case both current sources are used. >> + Possible values: >> + LEDS_BOOST_OFF (0) - no boost, >> + LEDS_BOOST_ADAPTIVE (1) - adaptive mode, >> + LEDS_BOOST_FIXED (2) - fixed mode. >> +- maxim,boost-mvout : Output voltage of the boost module in millivolts. >> +- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired >> + if chip estimates that system voltage could drop below this level due >> + to flash power consumption. >> + >> +Required properties of the LED child node: >> +- label : see Documentation/devicetree/bindings/leds/common.txt > > According to ePAPR, label is "a human readable string describing a device". > There's no requirement that this would be unique, for instance. If you have > a camera flash LED, there's necessarily no meaningful label for it, as it > doesn't really tell the user anything (vs. HDD activity LED, for instance). > > I think I'd make this optional. OK. > What comes to entity naming in Media controller, the label isn't enough. As > we haven't yet fully agreed on how to name the entities in the future, I'd > propose sticking to current practices: chip name (and optional numerical LED > ID) followed by the I2C address. The name should be specified by the driver. > > Do you have other than I2C busses required by the current drivers? I have AAT1290 device driven through GPIOs. There was also other driver, for a similar device, submitted few days ago to linux-leds list. >> +- led-sources : see Documentation/devicetree/bindings/leds/common.txt; >> + device current output identifiers: 0 - FLED1, 1 - FLED2 >> + >> +Optional properties of the LED child node: >> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt >> + Range: 15625 - 250000 >> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt >> + Range: 15625 - 1000000 >> +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt >> + Range: 62500 - 1000000 >> + >> Example: >> +#include >> + >> max77693@66 { >> compatible = "maxim,max77693"; >> reg = <0x66>; >> @@ -117,5 +163,20 @@ Example: >> maxim,thermal-regulation-celsius = <75>; >> maxim,battery-overcurrent-microamp = <3000000>; >> maxim,charge-input-threshold-microvolt = <4300000>; >> + >> + led { >> + compatible = "maxim,max77693-led"; >> + maxim,trigger-type = ; >> + maxim,boost-mode = ; >> + maxim,boost-mvout = <5000>; >> + maxim,mvsys-min = <2400>; >> + >> + camera_flash: flash-led { >> + label = "max77693-flash1"; >> + led-sources = <0>, <1>; >> + max-microamp = <500000>; >> + flash-max-microamp = <1250000>; >> + flash-timeout-us = <1000000>; >> + }; >> }; >> }; > -- Best Regards, Jacek Anaszewski