From: Roger Quadros <rogerq@ti.com>
To: Robert Baldyga <r.baldyga@samsung.com>, <cw00.choi@samsung.com>
Cc: <myungjoo.ham@samsung.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <m.szyprowski@samsung.com>
Subject: Re: [PATCH 3/4] extcon: usb-gpio: make debounce value configurable in devicetree
Date: Tue, 31 Mar 2015 12:30:14 +0300 [thread overview]
Message-ID: <551A6926.8030101@ti.com> (raw)
In-Reply-To: <1427787963-23562-4-git-send-email-r.baldyga@samsung.com>
On 31/03/15 10:46, Robert Baldyga wrote:
> This patch adds devicetree property for setting debounce value. It allows
> to set debounce time shorter or longer depending on the needs of given
> platform.
>
> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> ---
> drivers/extcon/extcon-usb-gpio.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
> index 02ff40e..86e3ece 100644
> --- a/drivers/extcon/extcon-usb-gpio.c
> +++ b/drivers/extcon/extcon-usb-gpio.c
> @@ -130,6 +130,7 @@ static int usb_extcon_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> struct device_node *np = dev->of_node;
> struct usb_extcon_info *info;
> + u32 debounce;
> int ret;
>
> if (!np)
> @@ -140,6 +141,11 @@ static int usb_extcon_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> info->dev = dev;
> +
> + ret = of_property_read_u32(np, "debounce", &debounce);
> + if (ret < 0)
> + debounce = USB_GPIO_DEBOUNCE_MS;
> +
Should we sanity check debounce value provided by device tree?
e.g. if it is greater than USB_GPIO_DEBOUNCE_MAX then we error out.
MAX could be 100 or 250ms.
> info->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id");
> info->vbus_gpiod = devm_gpiod_get_optional(&pdev->dev, "vbus");
>
> @@ -161,16 +167,14 @@ static int usb_extcon_probe(struct platform_device *pdev)
> }
>
> if (info->id_gpiod)
> - ret = gpiod_set_debounce(info->id_gpiod,
> - USB_GPIO_DEBOUNCE_MS * 1000);
> + ret = gpiod_set_debounce(info->id_gpiod, debounce * 1000);
> if (!ret && info->vbus_gpiod) {
> - ret = gpiod_set_debounce(info->vbus_gpiod,
> - USB_GPIO_DEBOUNCE_MS * 1000);
> + ret = gpiod_set_debounce(info->vbus_gpiod, debounce * 1000);
> if (ret < 0 && info->id_gpiod)
> gpiod_set_debounce(info->vbus_gpiod, 0);
> }
> if (ret < 0)
> - info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
> + info->debounce_jiffies = msecs_to_jiffies(debounce);
>
> INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
>
>
cheers,
-roger
next prev parent reply other threads:[~2015-03-31 9:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 7:45 [PATCH 0/4] extcon: usb-gpio: fixes and improvements Robert Baldyga
2015-03-31 7:46 ` [PATCH 1/4] extcon: usb-gpio: register extcon device before IRQ registration Robert Baldyga
2015-03-31 8:37 ` Roger Quadros
2015-03-31 7:46 ` [PATCH 2/4] extcon: usb-gpio: add support for VBUS detection Robert Baldyga
2015-03-31 9:22 ` Roger Quadros
2015-03-31 7:46 ` [PATCH 3/4] extcon: usb-gpio: make debounce value configurable in devicetree Robert Baldyga
2015-03-31 9:30 ` Roger Quadros [this message]
2015-03-31 12:16 ` Robert Baldyga
2015-03-31 7:46 ` [PATCH 4/4] Documentation: extcon: usb-gpio: update usb-gpio binding description Robert Baldyga
2015-03-31 10:20 ` Roger Quadros
2015-03-31 12:04 ` Robert Baldyga
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=551A6926.8030101@ti.com \
--to=rogerq@ti.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=myungjoo.ham@samsung.com \
--cc=r.baldyga@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).