From: Andrzej Hajda <a.hajda@samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: Re: [PATCH 1/2] ARM: EXYNOS: Get current parent clock for power domain on/off
Date: Fri, 03 Apr 2015 10:12:53 +0200 [thread overview]
Message-ID: <551E4B85.1000903@samsung.com> (raw)
In-Reply-To: <CAJKOXPc1dfHAaUQd+3HDhNwQW8xYDeoYFgN6QMkmQPEnLGtG-A@mail.gmail.com>
On 04/02/2015 02:44 PM, Krzysztof Kozlowski wrote:
> 2015-04-02 14:29 GMT+02:00 Javier Martinez Canillas
> <javier.martinez@collabora.co.uk>:
>> Hello Krzysztof,
>>
>> On 04/02/2015 10:06 AM, Krzysztof Kozlowski wrote:
>>> Using a fixed (by DTS) parent for clocks when turning on the power domain
>>> may introduce issues in other drivers. For example when such driver
>>> changes the parent during runtime and expects that he is the only place
>>> of such change.
>>>
>>> Do not rely entirely on DTS providing the fixed parent for such clocks.
>>> Instead if "pclkN" clock name is missing, grab a current parent of clock
>>> with clk_get_parent().
Hi Krzysztof,
I wonder if it wouldn't be better to drop entirely pclks. Power domains
should save/restore its previous state, setting fixed parents on domain
resume can fool drivers as you described earlier.
Regards
Andrzej
>>>
>>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>>> ---
>>> Documentation/devicetree/bindings/arm/exynos/power_domain.txt | 8 +++++---
>>> arch/arm/mach-exynos/pm_domains.c | 9 ++++++---
>>> 2 files changed, 11 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
>>> index 5da38c5ed476..0fc1312f6fd5 100644
>>> --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
>>> +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
>>> @@ -19,9 +19,11 @@ Optional Properties:
>>> domains.
>>> - clock-names: The following clocks can be specified:
>>> - oscclk: Oscillator clock.
>>> - - pclkN, clkN: Pairs of parent of input clock and input clock to the
>>> - devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
>>> - are supported currently.
>>> + - pclkN, clkN: Input clocks (clkN) to the devices in this power domain.
>>> + Optionally with parrents (pclkN). If such parent is provided
>>> + it will be used for reparenting the given clock when domain
>>> + is turned on. Otherwise the parent before power down will be
>>> + used. Maximum of 4 pairs (N = 0 to 3) are supported currently.
>>> - asbN: Clocks required by asynchronous bridges (ASB) present in
>>> the power domain. These clock should be enabled during power
>>> domain on/off operations.
>>> diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
>>> index cbe56b35aea0..c55bcf52a6ad 100644
>>> --- a/arch/arm/mach-exynos/pm_domains.c
>>> +++ b/arch/arm/mach-exynos/pm_domains.c
>>> @@ -37,6 +37,7 @@ struct exynos_pm_domain {
>>> struct clk *oscclk;
>>> struct clk *clk[MAX_CLK_PER_DOMAIN];
>>> struct clk *pclk[MAX_CLK_PER_DOMAIN];
>>> + unsigned int pclk_dynamic:MAX_CLK_PER_DOMAIN;
>>> struct clk *asb_clk[MAX_CLK_PER_DOMAIN];
>>> };
>>>
>>> @@ -62,6 +63,9 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
>>> for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
>>> if (IS_ERR(pd->clk[i]))
>>> break;
>>> + /* If parent was not set in DT, save current parent */
>>> + if (pd->pclk_dynamic & (1 << i))
>>
>> Small nit: I personally think that using the BIT(i) macro for shifting bits
>> is more readable but I guess is a matter of personal taste.
>
> Right, it seems I always forget about BIT macro.
> I'll respin with BIT() and your review/tested tags.
>
> Thanks for feedback and testing!
>
> Best regards,
> Krzysztof
>
next prev parent reply other threads:[~2015-04-03 8:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-02 8:06 [PATCH 1/2] ARM: EXYNOS: Get current parent clock for power domain on/off Krzysztof Kozlowski
2015-04-02 8:06 ` [PATCH 2/2] ARM: dts: Use last parent for clocks during " Krzysztof Kozlowski
2015-04-02 12:30 ` Javier Martinez Canillas
2015-04-02 12:29 ` [PATCH 1/2] ARM: EXYNOS: Get current parent clock for " Javier Martinez Canillas
2015-04-02 12:44 ` Krzysztof Kozlowski
2015-04-03 8:12 ` Andrzej Hajda [this message]
2015-04-03 8:35 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=551E4B85.1000903@samsung.com \
--to=a.hajda@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=javier.martinez@collabora.co.uk \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).