From: Baolin Wang <baolin.wang@linaro.org> To: sre@kernel.org Cc: orsonzhai@gmail.com, zhang.lyra@gmail.com, yuanjiang.yu@unisoc.com, baolin.wang@linaro.org, vincent.guittot@linaro.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 6/6] power: supply: sc27xx: Add POWER_SUPPLY_PROP_CALIBRATE attribute Date: Wed, 31 Jul 2019 18:00:28 +0800 [thread overview] Message-ID: <554dd7e2ef4f3c5247322d8b185607748144b1e6.1564566425.git.baolin.wang@linaro.org> (raw) In-Reply-To: <cover.1564566425.git.baolin.wang@linaro.org> In-Reply-To: <cover.1564566425.git.baolin.wang@linaro.org> From: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Add the 'POWER_SUPPLY_PROP_CALIBRATE' attribute to allow chareger manager to calibrate the battery capacity. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- drivers/power/supply/sc27xx_fuel_gauge.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c index fa85f40..6363c48 100644 --- a/drivers/power/supply/sc27xx_fuel_gauge.c +++ b/drivers/power/supply/sc27xx_fuel_gauge.c @@ -111,6 +111,7 @@ struct sc27xx_fgu_data { static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity); static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data, int cap, int int_mode); +static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap); static const char * const sc27xx_charger_supply_name[] = { "sc2731_charger", @@ -610,17 +611,25 @@ static int sc27xx_fgu_set_property(struct power_supply *psy, struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy); int ret; - if (psp != POWER_SUPPLY_PROP_CAPACITY) - return -EINVAL; - mutex_lock(&data->lock); - ret = sc27xx_fgu_save_last_cap(data, val->intval); + switch (psp) { + case POWER_SUPPLY_PROP_CAPACITY: + ret = sc27xx_fgu_save_last_cap(data, val->intval); + if (ret < 0) + dev_err(data->dev, "failed to save battery capacity\n"); + break; - mutex_unlock(&data->lock); + case POWER_SUPPLY_PROP_CALIBRATE: + sc27xx_fgu_adjust_cap(data, val->intval); + ret = 0; + break; - if (ret < 0) - dev_err(data->dev, "failed to save battery capacity\n"); + default: + ret = -EINVAL; + } + + mutex_unlock(&data->lock); return ret; } @@ -635,7 +644,8 @@ static void sc27xx_fgu_external_power_changed(struct power_supply *psy) static int sc27xx_fgu_property_is_writeable(struct power_supply *psy, enum power_supply_property psp) { - return psp == POWER_SUPPLY_PROP_CAPACITY; + return psp == POWER_SUPPLY_PROP_CAPACITY || + psp == POWER_SUPPLY_PROP_CALIBRATE; } static enum power_supply_property sc27xx_fgu_props[] = { @@ -651,6 +661,7 @@ static int sc27xx_fgu_property_is_writeable(struct power_supply *psy, POWER_SUPPLY_PROP_CURRENT_AVG, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, + POWER_SUPPLY_PROP_CALIBRATE, }; static const struct power_supply_desc sc27xx_fgu_desc = { -- 1.7.9.5
next prev parent reply other threads:[~2019-07-31 10:01 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-31 10:00 [PATCH 0/6] Optimize the Spreadtrum SC27xx fuel gauge Baolin Wang 2019-07-31 10:00 ` [PATCH 1/6] power: supply: sc27xx: Add POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN attribute Baolin Wang 2019-07-31 10:00 ` [PATCH 2/6] power: supply: sc27xx: Fix conditon to enable the FGU interrupt Baolin Wang 2019-07-31 10:00 ` [PATCH 3/6] power: supply: sc27xx: Fix the the accuracy issue of coulomb calculation Baolin Wang 2019-07-31 10:00 ` [PATCH 4/6] power: supply: sc27xx: Optimize the battery capacity calibration Baolin Wang 2019-07-31 10:00 ` [PATCH 5/6] power: supply: sc27xx: Make sure the alarm capacity is larger than 0 Baolin Wang 2019-07-31 10:00 ` Baolin Wang [this message] 2019-09-02 21:04 ` [PATCH 0/6] Optimize the Spreadtrum SC27xx fuel gauge Sebastian Reichel 2019-09-03 1:34 ` Baolin Wang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=554dd7e2ef4f3c5247322d8b185607748144b1e6.1564566425.git.baolin.wang@linaro.org \ --to=baolin.wang@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=orsonzhai@gmail.com \ --cc=sre@kernel.org \ --cc=vincent.guittot@linaro.org \ --cc=yuanjiang.yu@unisoc.com \ --cc=zhang.lyra@gmail.com \ --subject='Re: [PATCH 6/6] power: supply: sc27xx: Add POWER_SUPPLY_PROP_CALIBRATE attribute' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).