From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754583AbbLKJ0G (ORCPT <rfc822;w@1wt.eu>);
	Fri, 11 Dec 2015 04:26:06 -0500
Received: from eusmtp01.atmel.com ([212.144.249.242]:34363 "EHLO
	eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1751395AbbLKJZu (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Fri, 11 Dec 2015 04:25:50 -0500
Subject: Re: [PATCH linux-next 4/5] Documentation: atmel-quadspi: add binding
 file for Atmel QSPI driver
To: Cyrille Pitchen <cyrille.pitchen@atmel.com>, <computersforpeace@gmail.com>,
        <linux-mtd@lists.infradead.org>, <marex@denx.de>
References: <cover.1449494420.git.cyrille.pitchen@atmel.com>
 <caec561f882521b3896530404ecb2bbad9950435.1449494420.git.cyrille.pitchen@atmel.com>
CC: <vigneshr@ti.com>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <robh+dt@kernel.org>, <pawel.moll@arm.com>, <mark.rutland@arm.com>,
        <ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>
From: Nicolas Ferre <nicolas.ferre@atmel.com>
X-Enigmail-Draft-Status: N1110
Organization: atmel
Message-ID: <566A96B0.2010808@atmel.com>
Date: Fri, 11 Dec 2015 10:26:08 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101
 Thunderbird/38.4.0
MIME-Version: 1.0
In-Reply-To: <caec561f882521b3896530404ecb2bbad9950435.1449494420.git.cyrille.pitchen@atmel.com>
Content-Type: text/plain; charset="windows-1252"
Content-Transfer-Encoding: 8bit
X-Originating-IP: [10.161.30.18]
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Le 07/12/2015 15:09, Cyrille Pitchen a écrit :
> This patch documents the DT bindings for the driver of the Atmel QSPI
> controller embedded inside sama5d2x SoCs.
> 
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>

The change is very small from previous one and moreover accepted by Rob.
So, for sure:

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>


> ---
>  .../devicetree/bindings/mtd/atmel-quadspi.txt      | 32 ++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> new file mode 100644
> index 000000000000..e81f20f9faf1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> @@ -0,0 +1,32 @@
> +* Atmel Quad Serial Peripheral Interface (QSPI)
> +
> +Required properties:
> +- compatible:     Should be "atmel,sama5d2-qspi".
> +- reg:            Should contain the locations and lengths of the base registers
> +                  and the mapped memory.
> +- reg-names:      Should contain the resource reg names:
> +                  - qspi_base: configuration register address space
> +                  - qspi_mmap: memory mapped address space
> +- interrupts:     Should contain the interrupt for the device.
> +- clocks:         The phandle of the clock needed by the QSPI controller.
> +- #address-cells: Should be <1>.
> +- #size-cells:    Should be <0>.
> +
> +Example:
> +
> +spi@f0020000 {
> +	compatible = "atmel,sama5d2-qspi";
> +	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
> +	reg-names = "qpsi_base", "qspi_mmap";
> +	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
> +	clocks = <&spi0_clk>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_spi0_default>;
> +	status = "okay";
> +
> +	m25p80@0 {
> +		...
> +	};
> +};
> 


-- 
Nicolas Ferre