From: Hans Verkuil <hverkuil@xs4all.nl>
To: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Cc: Linux Media <linux-media@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kernel-mentors@selenic.com" <kernel-mentors@selenic.com>,
devel@driverdev.osuosl.org,
kernel-janitors <kernel-janitors@vger.kernel.org>,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Andrey Utkin <andrey.od.utkin@gmail.com>
Subject: Re: [RFC PATCH v0] Add tw5864 driver
Date: Mon, 8 Feb 2016 10:58:49 +0100 [thread overview]
Message-ID: <56B866D9.5070606@xs4all.nl> (raw)
In-Reply-To: <CAM_ZknVgTETBNXu+8N6eJa=cf_Mmj=+tA=ocKB9SJL5rkSyijQ@mail.gmail.com>
Hi Andrey,
Hmm, it looks like I forgot to reply. Sorry about that.
On 01/15/2016 03:13 AM, Andrey Utkin wrote:
> On Mon, Jan 11, 2016 at 12:52 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote:
>> Did you also test with v4l2-compliance? Before I accept the driver I want to see the
>> output of 'v4l2-compliance' and 'v4l2-compliance -s'. Basically there shouldn't be
>> any failures.
>>
>> I did a quick scan over the source and I saw nothing big. When you post the new
>> version I will go over it more carefully and do a proper review.
>
> Thank you for review.
> You can find output of v4l2-compliance and v4l2-compliance -s tests
> below (v4l-utils-1.8.0-42-gf1348b4).
> There are some issues, I will work on them.
> Could you please advise how could I optimize high-volume data passing
> to userspace apps?
> In one installation with 16 boards, when all streams are set to be 30
> FPS all-I-frames (workaround for another P-frames quality issue), the
> host struggles from regular lockups, see message immediately below
> (4.2.0 kernel though, DKMS package with slightly modified code to
> match older API).
> I am not fully sure it is related to my driver, but I guess memcpy-ish
> approach to preparing video frames may be very CPU-expensive. 30 FPS
> all-I-frames video stream is like 3 megabytes per second.
> Of course this is not very good situation anyway, and I should either
> fix original issue or find some workarounds, at last to lower
> framerate. But still, optimization of data passing using some
> appropriate API like scatter-gather should be done I believe. I need
> hints how to do that right.
> Thanks in advance.
If I understand it correctly the problem is that you need to insert h264
headers in front of the data, and for that you need to do a memcpy, for now
at least. We are looking into mechanisms to pass the header separately from
the video frame data, but I don't dare give an ETA when that arrives in
the kernel.
That said, it makes no sense to use H264 with I frames only, it defeats
the purpose of H264. I would concentrate on making the encoder work correcly
as that will dramatically reduce the amount of data to memcpy. For SDTV
inputs you can get good quality using an MPEG-2 encoder with just 1 MB/s
in my experience. H264 should reduce that further. And doing a memcpy for
worst-case 4*16 = 64 MB/s should not be a problem at all for modern CPUs.
Frankly, even 3*64 = 192 MB/s as you have now shouldn't pose a problem.
I wouldn't change the memcpy: in my experience it is very useful to get a
well-formed compressed stream out of the hardware. And the overhead of
having to do a memcpy is a small price to pay and on modern CPUs should
be barely noticeable for SDTV inputs.
I don't believe that the lockups you see are related to the memcpy as
such. The trace says that a cpu is stuck for 22s, no way that is related
to something like that. It looks more like a deadlock somewhere.
Regarding the compliance tests: don't pass VB2_USERPTR (doesn't work well
with videobuf2-dma-contig). Also add vidioc_expbuf = vb2_ioctl_expbuf for
the DMABUF support. That should clear up some of the errors you see.
Regards,
Hans
>
> Jan 13 19:35:20 cctv kernel: [34202.715069] NMI watchdog: BUG: soft
> lockup - CPU#2 stuck for 22s! [khugepaged:69]
> Jan 13 19:35:20 cctv kernel: [34202.715071] Modules linked in: ib_iser
> rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp
> libiscsi_tcp libiscsi scsi_transport_iscsi ast ttm drm_kms_helper drm
> syscopyarea sysfillrect sysimgblt xfs libcrc32c ipmi_ssif joydev
> input_leds intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp
> coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul aesni_intel
> aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd sb_edac
> edac_core lpc_ich mei_me mei shpchp wmi tw5864(OE) solo6x10
> videobuf2_dma_contig videobuf2_dma_sg videobuf2_memops videobuf2_core
> v4l2_common videodev media ipmi_si 8250_fintek ipmi_msghandler snd_pcm
> snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device
> snd_timer snd acpi_power_meter acpi_pad soundcore mac_hid parport_pc
> ppdev lp parport hid_generic usbhid hid igb i2c_algo_bit ahci dca ptp
> libahci megaraid_sas pps_core
> Jan 13 19:35:20 cctv kernel: [34202.715105] CPU: 2 PID: 69 Comm:
> khugepaged Tainted: G W OEL 4.2.0-23-generic
> #28~14.04.1-Ubuntu
> Jan 13 19:35:20 cctv kernel: [34202.715106] Hardware name: Supermicro
> Super Server/X10SRi-F, BIOS 2.0 12/17/2015
> Jan 13 19:35:20 cctv kernel: [34202.715107] task: ffff88046d7a6040 ti:
> ffff88046d0f4000 task.ti: ffff88046d0f4000
> Jan 13 19:35:20 cctv kernel: [34202.715108] RIP:
> 0010:[<ffffffff810f4c49>] [<ffffffff810f4c49>]
> smp_call_function_many+0x1f9/0x250
> Jan 13 19:35:20 cctv kernel: [34202.715112] RSP: 0018:ffff88046d0f7b58
> EFLAGS: 00000202
> Jan 13 19:35:20 cctv kernel: [34202.715112] RAX: 0000000000000003 RBX:
> 0000000000000000 RCX: ffff88047fd1a870
> Jan 13 19:35:20 cctv kernel: [34202.715113] RDX: 0000000000000004 RSI:
> 0000000000000100 RDI: ffff88047fc97788
> Jan 13 19:35:20 cctv kernel: [34202.715114] RBP: ffff88046d0f7b98 R08:
> 00000000000000fb R09: 0000000000000000
> Jan 13 19:35:20 cctv kernel: [34202.715114] R10: 0000000000000004 R11:
> 0000000000000000 R12: 0000000000000297
> Jan 13 19:35:20 cctv kernel: [34202.715115] R13: ffff88046d0f7b08 R14:
> 0000000000000202 R15: 0000000000000202
> Jan 13 19:35:20 cctv kernel: [34202.715116] FS:
> 0000000000000000(0000) GS:ffff88047fc80000(0000)
> knlGS:0000000000000000
> Jan 13 19:35:20 cctv kernel: [34202.715117] CS: 0010 DS: 0000 ES:
> 0000 CR0: 0000000080050033
> Jan 13 19:35:20 cctv kernel: [34202.715118] CR2: 00007fae31dc0000 CR3:
> 0000000001c0d000 CR4: 00000000001406e0
> Jan 13 19:35:20 cctv kernel: [34202.715118] Stack:
> Jan 13 19:35:20 cctv kernel: [34202.715119] 0000000000017740
> 01ff880400000001 0000000000000009 ffffffff81fb4ec0
> Jan 13 19:35:20 cctv kernel: [34202.715120] ffffffff8117d4c0
> 0000000000000000 0000000000000002 0000000000000100
> Jan 13 19:35:20 cctv kernel: [34202.715122] ffff88046d0f7bc8
> ffffffff810f4e49 0000000000000100 0000000000000000
> Jan 13 19:35:20 cctv kernel: [34202.715123] Call Trace:
> Jan 13 19:35:20 cctv kernel: [34202.715127] [<ffffffff8117d4c0>] ?
> page_alloc_cpu_notify+0x50/0x50
> Jan 13 19:35:20 cctv kernel: [34202.715128] [<ffffffff810f4e49>]
> on_each_cpu_mask+0x29/0x70
> Jan 13 19:35:20 cctv kernel: [34202.715129] [<ffffffff8117b513>]
> drain_all_pages+0xd3/0xf0
> Jan 13 19:35:20 cctv kernel: [34202.715131] [<ffffffff8117f391>]
> __alloc_pages_nodemask+0x631/0x990
> Jan 13 19:35:20 cctv kernel: [34202.715134] [<ffffffff811d5cb0>]
> khugepaged_scan_mm_slot+0x540/0xf50
> Jan 13 19:35:20 cctv kernel: [34202.715136] [<ffffffff817b9b85>] ?
> schedule_timeout+0x165/0x2a0
> Jan 13 19:35:20 cctv kernel: [34202.715137] [<ffffffff811d67dd>]
> khugepaged+0x11d/0x440
> Jan 13 19:35:20 cctv kernel: [34202.715139] [<ffffffff810b73f0>] ?
> prepare_to_wait_event+0xf0/0xf0
> Jan 13 19:35:20 cctv kernel: [34202.715141] [<ffffffff811d66c0>] ?
> khugepaged_scan_mm_slot+0xf50/0xf50
> Jan 13 19:35:20 cctv kernel: [34202.715143] [<ffffffff810951b2>]
> kthread+0xd2/0xf0
> Jan 13 19:35:20 cctv kernel: [34202.715144] [<ffffffff810950e0>] ?
> kthread_create_on_node+0x1c0/0x1c0
> Jan 13 19:35:20 cctv kernel: [34202.715146] [<ffffffff817baedf>]
> ret_from_fork+0x3f/0x70
> Jan 13 19:35:20 cctv kernel: [34202.715147] [<ffffffff810950e0>] ?
> kthread_create_on_node+0x1c0/0x1c0
> Jan 13 19:35:20 cctv kernel: [34202.715147] Code: 51 2c 00 3b 05 ad 82
> c3 00 89 c2 0f 8d 98 fe ff ff 48 98 49 8b 4d 00 48 03 0c c5 40 ae d2
> 81 8b 41 18 a8 01 74 ca f3 90 8b 41 18 <a8> 01 75 f7 eb bf 0f b6 4d c8
> 4c 89 fa 4c 89 f6 44 89 ef e8 7f
>
>
>
> # /src/v4l-utils/utils/v4l2-compliance/v4l2-compliance -d /dev/video6
> Driver Info:
> Driver name : tw5864
> Card type : TW5864 Encoder 2
> Bus info : PCI:0000:06:05.0
> Driver version: 4.4.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video6 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(386): node->s_std(std)
> fail: v4l2-test-buffers.cpp(500): testCanSetSameTimings(node)
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> test VIDIOC_EXPBUF: OK (Not Supported)
>
> Test input 0:
>
>
> Total: 42, Succeeded: 41, Failed: 1, Warnings: 0
> [ERR]
> 01:58:05root@localhost /usr/local/src/linux
> # /src/v4l-utils/utils/v4l2-compliance/v4l2-compliance -s -d /dev/video6
> Driver Info:
> Driver name : tw5864
> Card type : TW5864 Encoder 2
> Bus info : PCI:0000:06:05.0
> Driver version: 4.4.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video6 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(386): node->s_std(std)
> fail: v4l2-test-buffers.cpp(500): testCanSetSameTimings(node)
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> test VIDIOC_EXPBUF: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
> fail: v4l2-test-buffers.cpp(959): ret != EINVAL
> test MMAP: FAIL
> fail: v4l2-test-buffers.cpp(1043): buf.qbuf(node)
> fail: v4l2-test-buffers.cpp(1087): setupUserPtr(node, q)
> test USERPTR: FAIL
> test DMABUF: Cannot test, specify --expbuf-device
>
>
> Total: 45, Succeeded: 42, Failed: 3, Warnings: 0
> [ERR]
> 01:58:11root@localhost /usr/local/src/linux
> # /src/v4l-utils/utils/v4l2-compliance/v4l2-compliance -s
> --expbuf-device=/dev/video6 -d /dev/video6
> Driver Info:
> Driver name : tw5864
> Card type : TW5864 Encoder 2
> Bus info : PCI:0000:06:05.0
> Driver version: 4.4.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video6 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(386): node->s_std(std)
> fail: v4l2-test-buffers.cpp(500): testCanSetSameTimings(node)
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> test VIDIOC_EXPBUF: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
> fail: v4l2-test-buffers.cpp(959): ret != EINVAL
> test MMAP: FAIL
> fail: v4l2-test-buffers.cpp(1043): buf.qbuf(node)
> fail: v4l2-test-buffers.cpp(1087): setupUserPtr(node, q)
> test USERPTR: FAIL
> fail: v4l2-test-buffers.cpp(1111):
> exp_q.reqbufs(expbuf_node, q.g_buffers())
> fail: v4l2-test-buffers.cpp(1200):
> setupDmaBuf(expbuf_node, node, q, exp_q)
> test DMABUF: FAIL
>
>
> Total: 46, Succeeded: 42, Failed: 4, Warnings: 0
> [ERR]
>
next prev parent reply other threads:[~2016-02-08 9:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-03 1:41 [RFC PATCH v0] Add tw5864 driver Andrey Utkin
2016-01-03 3:47 ` Joe Perches
2016-01-03 13:34 ` Andrey Utkin
2016-01-03 5:38 ` Leon Romanovsky
2016-01-11 10:52 ` Hans Verkuil
2016-01-15 2:13 ` Andrey Utkin
2016-02-08 9:58 ` Hans Verkuil [this message]
2016-02-08 10:23 ` Andrey Utkin
2016-02-08 10:29 ` Hans Verkuil
2016-03-09 14:29 ` Andrey Utkin
2016-03-11 8:00 ` Hans Verkuil
2016-03-11 8:40 ` Andrey Utkin
2016-03-11 9:59 ` Hans Verkuil
2016-03-11 13:23 ` Andrey Utkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B866D9.5070606@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=andrey.od.utkin@gmail.com \
--cc=andrey.utkin@corp.bluecherry.net \
--cc=devel@driverdev.osuosl.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=kernel-mentors@selenic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).