linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5] input: tablet: add Pegasus Notetaker tablet driver
@ 2016-05-27  9:46 Martin Kepplinger
  2016-05-27 18:34 ` Martin Kepplinger
  2016-05-27 21:59 ` Dmitry Torokhov
  0 siblings, 2 replies; 4+ messages in thread
From: Martin Kepplinger @ 2016-05-27  9:46 UTC (permalink / raw)
  To: dmitry.torokhov
  Cc: linux-kernel, linux-input, kernel-testers, linux-usb, Martin Kepplinger

This adds a driver for the Pegasus Notetaker Pen. When connected,
this uses the Pen as an input tablet.

This device was sold in various different brandings, for example
	"Pegasus Mobile Notetaker M210",
	"Genie e-note The Notetaker",
	"Staedtler Digital ballpoint pen 990 01",
	"IRISnotes Express" or
	"NEWLink Digital Note Taker".

Here's an example, so that you know what we are talking about:
http://www.staedtler.com/en/products/ink-writing-instruments/ballpoint-pens/digital-pen-990-01-digital-ballpoint-pen

http://pegatech.blogspot.com/ seems to be a remaining official resource.

This device can also transfer saved (offline recorded handwritten) data and
there are userspace programs that do this, see https://launchpad.net/m210
(Well, alternatively there are really fast scanners out there :)

It's *really* fun to use as an input tablet though! So let's support this
for everybody.

There's no way to disable the device. When the pen is out of range, we just
don't get any URBs and don't do anything.
Like all other mouses or input tablets, we don't use runtime PM.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
---

Thanks for reviewing! Dmitry's and Oliver's changes to v4 made it even
smaller now. All is tested again and should apply to any recent tree.
If not, please just complain.

revision history
================
v5 fix various bugs (thanks Oliver and Dmitry)
v4 use normal work queue instead of a kernel thread (thanks to Oliver Neukum)
v3 fix reporting low pen battery and add USB list to CC
v2 minor cleanup (remove unnecessary variables)
v1 initial release


 drivers/input/tablet/Kconfig             |  15 ++
 drivers/input/tablet/Makefile            |   1 +
 drivers/input/tablet/pegasus_notetaker.c | 361 +++++++++++++++++++++++++++++++
 3 files changed, 377 insertions(+)
 create mode 100644 drivers/input/tablet/pegasus_notetaker.c

diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index 623bb9e..a2b9f97 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -73,6 +73,21 @@ config TABLET_USB_KBTAB
 	  To compile this driver as a module, choose M here: the
 	  module will be called kbtab.
 
+config TABLET_USB_PEGASUS
+	tristate "Pegasus Mobile Notetaker Pen input tablet support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use the Pegasus Mobile Notetaker,
+	  also known as:
+	  Genie e-note The Notetaker,
+	  Staedtler Digital ballpoint pen 990 01,
+	  IRISnotes Express or
+	  NEWLink Digital Note Taker.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pegasus_notetaker.
+
 config TABLET_SERIAL_WACOM4
 	tristate "Wacom protocol 4 serial tablet support"
 	select SERIO
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
index 2e13010..200fc4e 100644
--- a/drivers/input/tablet/Makefile
+++ b/drivers/input/tablet/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_TABLET_USB_AIPTEK)	+= aiptek.o
 obj-$(CONFIG_TABLET_USB_GTCO)	+= gtco.o
 obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o
 obj-$(CONFIG_TABLET_USB_KBTAB)	+= kbtab.o
+obj-$(CONFIG_TABLET_USB_PEGASUS) += pegasus_notetaker.o
 obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o
diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c
new file mode 100644
index 0000000..e211601
--- /dev/null
+++ b/drivers/input/tablet/pegasus_notetaker.c
@@ -0,0 +1,361 @@
+/*
+ * Pegasus Mobile Notetaker Pen input tablet driver
+ *
+ * Copyright (c) 2016 Martin Kepplinger <martink@posteo.de>
+ */
+
+/*
+ * request packet (control endpoint):
+ * |-------------------------------------|
+ * | Report ID | Nr of bytes | command   |
+ * | (1 byte)  | (1 byte)    | (n bytes) |
+ * |-------------------------------------|
+ * | 0x02      | n           |           |
+ * |-------------------------------------|
+ *
+ * data packet after set xy mode command, 0x80 0xb5 0x02 0x01
+ * and pen is in range:
+ *
+ * byte	byte name		value (bits)
+ * --------------------------------------------
+ * 0	status			0 1 0 0 0 0 X X
+ * 1	color			0 0 0 0 H 0 S T
+ * 2	X low
+ * 3	X high
+ * 4	Y low
+ * 5	Y high
+ *
+ * X X	battery state:
+ *	no state reported	0x00
+ *	battery low		0x01
+ *	battery good		0x02
+ *
+ * H	Hovering
+ * S	Switch 1 (pen button)
+ * T	Tip
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hid.h>
+#include <linux/usb/input.h>
+
+/* USB HID defines */
+#define USB_REQ_GET_REPORT		0x01
+#define USB_REQ_SET_REPORT		0x09
+
+#define USB_VENDOR_ID_PEGASUSTECH	0x0e20
+#define USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100	0x0101
+
+/* device specific defines */
+#define NOTETAKER_REPORT_ID		0x02
+#define NOTETAKER_SET_CMD		0x80
+#define NOTETAKER_SET_MODE		0xb5
+
+#define NOTETAKER_LED_MOUSE             0x02
+#define PEN_MODE_XY                     0x01
+
+#define SPECIAL_COMMAND			0x80
+#define BUTTON_PRESSED			0xb5
+#define COMMAND_VERSION			0xa9
+
+/* in xy data packet */
+#define BATTERY_NO_REPORT		0x40
+#define BATTERY_LOW			0x41
+#define BATTERY_GOOD			0x42
+#define PEN_BUTTON_PRESSED		BIT(1)
+#define PEN_TIP				BIT(0)
+
+struct pegasus {
+	unsigned char *data;
+	u8 data_len;
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_device *usbdev;
+	struct urb *irq;
+	char name[128];
+	char phys[64];
+	struct work_struct init;
+};
+
+static void pegasus_control_msg(struct pegasus *pegasus, u8 *data, int len)
+{
+	const int sizeof_buf = len * sizeof(u8) + 2;
+	int result;
+	u8 *cmd_buf;
+
+	cmd_buf = kmalloc(sizeof_buf, GFP_KERNEL);
+	if (!cmd_buf)
+		return;
+
+	cmd_buf[0] = NOTETAKER_REPORT_ID;
+	cmd_buf[1] = len;
+	memcpy(cmd_buf + 2, data, len);
+
+	result = usb_control_msg(pegasus->usbdev,
+				 usb_sndctrlpipe(pegasus->usbdev, 0),
+				 USB_REQ_SET_REPORT,
+				 USB_TYPE_VENDOR | USB_DIR_OUT,
+				 0, 0, cmd_buf, sizeof_buf,
+				 USB_CTRL_SET_TIMEOUT);
+
+	if (result != sizeof_buf)
+		dev_err(&pegasus->usbdev->dev, "control msg error\n");
+
+	kfree(cmd_buf);
+}
+
+static void pegasus_set_mode(struct pegasus *pegasus, u8 mode, u8 led)
+{
+	u8 cmd[] = {NOTETAKER_SET_CMD, NOTETAKER_SET_MODE, led, mode};
+
+	pegasus_control_msg(pegasus, cmd, sizeof(cmd));
+}
+
+static void pegasus_parse_packet(struct pegasus *pegasus)
+{
+	unsigned char *data = pegasus->data;
+	struct input_dev *dev = pegasus->dev;
+	u16 x, y;
+
+	switch (data[0]) {
+	case SPECIAL_COMMAND:
+		/* device button pressed */
+		if (data[1] == BUTTON_PRESSED)
+			schedule_work(&pegasus->init);
+
+		break;
+	/* xy data */
+	case BATTERY_LOW:
+		dev_warn_once(&dev->dev, "Pen battery low\n");
+	case BATTERY_NO_REPORT:
+	case BATTERY_GOOD:
+		x = le16_to_cpup((__le16 *)&data[2]);
+		y = le16_to_cpup((__le16 *)&data[4]);
+
+		/* ignore pen up events */
+		if (x == 0 && y == 0)
+			break;
+
+		input_report_key(dev, BTN_TOUCH, data[1] & PEN_TIP);
+		input_report_key(dev, BTN_RIGHT, data[1] & PEN_BUTTON_PRESSED);
+		input_report_key(dev, BTN_TOOL_PEN, 1);
+		input_report_abs(dev, ABS_X, (s16)x);
+		input_report_abs(dev, ABS_Y, y);
+
+		input_sync(dev);
+		break;
+	default:
+		dev_warn_once(&pegasus->usbdev->dev,
+			      "unknown answer from device\n");
+	}
+}
+
+static void pegasus_irq(struct urb *urb)
+{
+	struct pegasus *pegasus = urb->context;
+	struct usb_device *dev = pegasus->usbdev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		pegasus_parse_packet(pegasus);
+		usb_mark_last_busy(pegasus->usbdev);
+
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dev_err(&dev->dev, "%s - urb shutting down with status: %d",
+			__func__, urb->status);
+		return;
+	default:
+		dev_err(&dev->dev, "%s - nonzero urb status received: %d",
+			__func__, urb->status);
+		break;
+	}
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d",
+			__func__, retval);
+}
+
+static void pegasus_init(struct work_struct *work)
+{
+	struct pegasus *pegasus = container_of(work, struct pegasus, init);
+
+	pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE);
+}
+
+static int pegasus_open(struct input_dev *dev)
+{
+	struct pegasus *pegasus = input_get_drvdata(dev);
+
+	pegasus->irq->dev = pegasus->usbdev;
+	if (usb_submit_urb(pegasus->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void pegasus_close(struct input_dev *dev)
+{
+	struct pegasus *pegasus = input_get_drvdata(dev);
+
+	usb_kill_urb(pegasus->irq);
+	cancel_work_sync(&pegasus->init);
+}
+
+static int pegasus_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct pegasus *pegasus;
+	struct input_dev *input_dev;
+	int error;
+	int pipe, maxp;
+
+	/* we control interface 0 */
+	if (intf->cur_altsetting->desc.bInterfaceNumber == 1)
+		return -ENODEV;
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	pegasus = kzalloc(sizeof(*pegasus), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pegasus || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	pegasus->usbdev = dev;
+	pegasus->dev = input_dev;
+
+	pegasus->data = usb_alloc_coherent(dev, endpoint->wMaxPacketSize,
+					   GFP_KERNEL, &pegasus->data_dma);
+	if (!pegasus->data) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	pegasus->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->irq) {
+		error = -ENOMEM;
+		goto err_free_dma;
+	}
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+	pegasus->data_len = maxp;
+
+	usb_fill_int_urb(pegasus->irq, dev, pipe, pegasus->data, maxp,
+			 pegasus_irq, pegasus, endpoint->bInterval);
+
+	pegasus->irq->transfer_dma = pegasus->data_dma;
+	pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	if (dev->manufacturer)
+		strlcpy(pegasus->name, dev->manufacturer,
+			sizeof(pegasus->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(pegasus->name, " ", sizeof(pegasus->name));
+		strlcat(pegasus->name, dev->product, sizeof(pegasus->name));
+	}
+
+	if (!strlen(pegasus->name))
+		snprintf(pegasus->name, sizeof(pegasus->name),
+			 "USB Pegasus Device %04x:%04x",
+			 le16_to_cpu(dev->descriptor.idVendor),
+			 le16_to_cpu(dev->descriptor.idProduct));
+
+	usb_make_path(dev, pegasus->phys, sizeof(pegasus->phys));
+	strlcat(pegasus->phys, "/input0", sizeof(pegasus->phys));
+
+	INIT_WORK(&pegasus->init, pegasus_init);
+
+	usb_set_intfdata(intf, pegasus);
+
+	input_dev->name = pegasus->name;
+	input_dev->phys = pegasus->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, pegasus);
+
+	input_dev->open = pegasus_open;
+	input_dev->close = pegasus_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	__set_bit(ABS_X, input_dev->absbit);
+	__set_bit(ABS_Y, input_dev->absbit);
+
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	__set_bit(BTN_RIGHT, input_dev->keybit);
+	__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+
+	__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+	__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	input_set_abs_params(input_dev, ABS_X, -1500, 1500, 8, 0);
+	input_set_abs_params(input_dev, ABS_Y, 1600, 3000, 8, 0);
+
+	pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE);
+
+	error = input_register_device(pegasus->dev);
+	if (error)
+		goto err_free_urb;
+
+	return 0;
+
+err_free_urb:
+	usb_free_urb(pegasus->irq);
+err_free_dma:
+	usb_free_coherent(dev, pegasus->data_len,
+			  pegasus->data, pegasus->data_dma);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(pegasus);
+	usb_set_intfdata(intf, NULL);
+
+	return error;
+}
+
+static void pegasus_disconnect(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	input_unregister_device(pegasus->dev);
+
+	usb_free_urb(pegasus->irq);
+	usb_free_coherent(interface_to_usbdev(intf),
+			  pegasus->data_len, pegasus->data,
+			  pegasus->data_dma);
+	kfree(pegasus);
+	usb_set_intfdata(intf, NULL);
+}
+
+static const struct usb_device_id pegasus_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_PEGASUSTECH,
+		     USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, pegasus_ids);
+
+static struct usb_driver pegasus_driver = {
+	.name		= "pegasus_notetaker",
+	.probe		= pegasus_probe,
+	.disconnect	= pegasus_disconnect,
+	.id_table	= pegasus_ids,
+};
+
+module_usb_driver(pegasus_driver);
+
+MODULE_AUTHOR("Martin Kepplinger <martink@posteo.de>");
+MODULE_DESCRIPTION("Pegasus Mobile Notetaker Pen tablet driver");
+MODULE_LICENSE("GPL");
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH v5] input: tablet: add Pegasus Notetaker tablet driver
  2016-05-27  9:46 [PATCH v5] input: tablet: add Pegasus Notetaker tablet driver Martin Kepplinger
@ 2016-05-27 18:34 ` Martin Kepplinger
  2016-05-27 21:59 ` Dmitry Torokhov
  1 sibling, 0 replies; 4+ messages in thread
From: Martin Kepplinger @ 2016-05-27 18:34 UTC (permalink / raw)
  To: dmitry.torokhov
  Cc: linux-kernel, linux-input, kernel-testers, linux-usb, Martin Kepplinger

This adds a driver for the Pegasus Notetaker Pen. When connected,
this uses the Pen as an input tablet.

This device was sold in various different brandings, for example
	"Pegasus Mobile Notetaker M210",
	"Genie e-note The Notetaker",
	"Staedtler Digital ballpoint pen 990 01",
	"IRISnotes Express" or
	"NEWLink Digital Note Taker".

Here's an example, so that you know what we are talking about:
http://www.genie-online.de/genie-e-note-2/

https://pegatech.blogspot.com/ seems to be a remaining official resource.

This device can also transfer saved (offline recorded handwritten) data and
there are userspace programs that do this, see https://launchpad.net/m210
(Well, alternatively there are really fast scanners out there :)

It's *really* fun to use as an input tablet though! So let's support this
for everybody.

There's no way to disable the device. When the pen is out of range, we just
don't get any URBs and don't do anything.
Like all other mouses or input tablets, we don't use runtime PM.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
---

This is *exactly* v5 again, only with updated commit message third-party
links that broke in the meantime.

Again, all is tested and should apply to any recent tree. If not, please
just complain.

revision history
================
v5 fix various bugs (thanks Oliver and Dmitry)
v4 use normal work queue instead of a kernel thread (thanks to Oliver Neukum)
v3 fix reporting low pen battery and add USB list to CC
v2 minor cleanup (remove unnecessary variables)
v1 initial release


 drivers/input/tablet/Kconfig             |  15 ++
 drivers/input/tablet/Makefile            |   1 +
 drivers/input/tablet/pegasus_notetaker.c | 361 +++++++++++++++++++++++++++++++
 3 files changed, 377 insertions(+)
 create mode 100644 drivers/input/tablet/pegasus_notetaker.c

diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index 623bb9e..a2b9f97 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -73,6 +73,21 @@ config TABLET_USB_KBTAB
 	  To compile this driver as a module, choose M here: the
 	  module will be called kbtab.
 
+config TABLET_USB_PEGASUS
+	tristate "Pegasus Mobile Notetaker Pen input tablet support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use the Pegasus Mobile Notetaker,
+	  also known as:
+	  Genie e-note The Notetaker,
+	  Staedtler Digital ballpoint pen 990 01,
+	  IRISnotes Express or
+	  NEWLink Digital Note Taker.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pegasus_notetaker.
+
 config TABLET_SERIAL_WACOM4
 	tristate "Wacom protocol 4 serial tablet support"
 	select SERIO
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
index 2e13010..200fc4e 100644
--- a/drivers/input/tablet/Makefile
+++ b/drivers/input/tablet/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_TABLET_USB_AIPTEK)	+= aiptek.o
 obj-$(CONFIG_TABLET_USB_GTCO)	+= gtco.o
 obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o
 obj-$(CONFIG_TABLET_USB_KBTAB)	+= kbtab.o
+obj-$(CONFIG_TABLET_USB_PEGASUS) += pegasus_notetaker.o
 obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o
diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c
new file mode 100644
index 0000000..e211601
--- /dev/null
+++ b/drivers/input/tablet/pegasus_notetaker.c
@@ -0,0 +1,361 @@
+/*
+ * Pegasus Mobile Notetaker Pen input tablet driver
+ *
+ * Copyright (c) 2016 Martin Kepplinger <martink@posteo.de>
+ */
+
+/*
+ * request packet (control endpoint):
+ * |-------------------------------------|
+ * | Report ID | Nr of bytes | command   |
+ * | (1 byte)  | (1 byte)    | (n bytes) |
+ * |-------------------------------------|
+ * | 0x02      | n           |           |
+ * |-------------------------------------|
+ *
+ * data packet after set xy mode command, 0x80 0xb5 0x02 0x01
+ * and pen is in range:
+ *
+ * byte	byte name		value (bits)
+ * --------------------------------------------
+ * 0	status			0 1 0 0 0 0 X X
+ * 1	color			0 0 0 0 H 0 S T
+ * 2	X low
+ * 3	X high
+ * 4	Y low
+ * 5	Y high
+ *
+ * X X	battery state:
+ *	no state reported	0x00
+ *	battery low		0x01
+ *	battery good		0x02
+ *
+ * H	Hovering
+ * S	Switch 1 (pen button)
+ * T	Tip
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hid.h>
+#include <linux/usb/input.h>
+
+/* USB HID defines */
+#define USB_REQ_GET_REPORT		0x01
+#define USB_REQ_SET_REPORT		0x09
+
+#define USB_VENDOR_ID_PEGASUSTECH	0x0e20
+#define USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100	0x0101
+
+/* device specific defines */
+#define NOTETAKER_REPORT_ID		0x02
+#define NOTETAKER_SET_CMD		0x80
+#define NOTETAKER_SET_MODE		0xb5
+
+#define NOTETAKER_LED_MOUSE             0x02
+#define PEN_MODE_XY                     0x01
+
+#define SPECIAL_COMMAND			0x80
+#define BUTTON_PRESSED			0xb5
+#define COMMAND_VERSION			0xa9
+
+/* in xy data packet */
+#define BATTERY_NO_REPORT		0x40
+#define BATTERY_LOW			0x41
+#define BATTERY_GOOD			0x42
+#define PEN_BUTTON_PRESSED		BIT(1)
+#define PEN_TIP				BIT(0)
+
+struct pegasus {
+	unsigned char *data;
+	u8 data_len;
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_device *usbdev;
+	struct urb *irq;
+	char name[128];
+	char phys[64];
+	struct work_struct init;
+};
+
+static void pegasus_control_msg(struct pegasus *pegasus, u8 *data, int len)
+{
+	const int sizeof_buf = len * sizeof(u8) + 2;
+	int result;
+	u8 *cmd_buf;
+
+	cmd_buf = kmalloc(sizeof_buf, GFP_KERNEL);
+	if (!cmd_buf)
+		return;
+
+	cmd_buf[0] = NOTETAKER_REPORT_ID;
+	cmd_buf[1] = len;
+	memcpy(cmd_buf + 2, data, len);
+
+	result = usb_control_msg(pegasus->usbdev,
+				 usb_sndctrlpipe(pegasus->usbdev, 0),
+				 USB_REQ_SET_REPORT,
+				 USB_TYPE_VENDOR | USB_DIR_OUT,
+				 0, 0, cmd_buf, sizeof_buf,
+				 USB_CTRL_SET_TIMEOUT);
+
+	if (result != sizeof_buf)
+		dev_err(&pegasus->usbdev->dev, "control msg error\n");
+
+	kfree(cmd_buf);
+}
+
+static void pegasus_set_mode(struct pegasus *pegasus, u8 mode, u8 led)
+{
+	u8 cmd[] = {NOTETAKER_SET_CMD, NOTETAKER_SET_MODE, led, mode};
+
+	pegasus_control_msg(pegasus, cmd, sizeof(cmd));
+}
+
+static void pegasus_parse_packet(struct pegasus *pegasus)
+{
+	unsigned char *data = pegasus->data;
+	struct input_dev *dev = pegasus->dev;
+	u16 x, y;
+
+	switch (data[0]) {
+	case SPECIAL_COMMAND:
+		/* device button pressed */
+		if (data[1] == BUTTON_PRESSED)
+			schedule_work(&pegasus->init);
+
+		break;
+	/* xy data */
+	case BATTERY_LOW:
+		dev_warn_once(&dev->dev, "Pen battery low\n");
+	case BATTERY_NO_REPORT:
+	case BATTERY_GOOD:
+		x = le16_to_cpup((__le16 *)&data[2]);
+		y = le16_to_cpup((__le16 *)&data[4]);
+
+		/* ignore pen up events */
+		if (x == 0 && y == 0)
+			break;
+
+		input_report_key(dev, BTN_TOUCH, data[1] & PEN_TIP);
+		input_report_key(dev, BTN_RIGHT, data[1] & PEN_BUTTON_PRESSED);
+		input_report_key(dev, BTN_TOOL_PEN, 1);
+		input_report_abs(dev, ABS_X, (s16)x);
+		input_report_abs(dev, ABS_Y, y);
+
+		input_sync(dev);
+		break;
+	default:
+		dev_warn_once(&pegasus->usbdev->dev,
+			      "unknown answer from device\n");
+	}
+}
+
+static void pegasus_irq(struct urb *urb)
+{
+	struct pegasus *pegasus = urb->context;
+	struct usb_device *dev = pegasus->usbdev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		pegasus_parse_packet(pegasus);
+		usb_mark_last_busy(pegasus->usbdev);
+
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dev_err(&dev->dev, "%s - urb shutting down with status: %d",
+			__func__, urb->status);
+		return;
+	default:
+		dev_err(&dev->dev, "%s - nonzero urb status received: %d",
+			__func__, urb->status);
+		break;
+	}
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d",
+			__func__, retval);
+}
+
+static void pegasus_init(struct work_struct *work)
+{
+	struct pegasus *pegasus = container_of(work, struct pegasus, init);
+
+	pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE);
+}
+
+static int pegasus_open(struct input_dev *dev)
+{
+	struct pegasus *pegasus = input_get_drvdata(dev);
+
+	pegasus->irq->dev = pegasus->usbdev;
+	if (usb_submit_urb(pegasus->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void pegasus_close(struct input_dev *dev)
+{
+	struct pegasus *pegasus = input_get_drvdata(dev);
+
+	usb_kill_urb(pegasus->irq);
+	cancel_work_sync(&pegasus->init);
+}
+
+static int pegasus_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct pegasus *pegasus;
+	struct input_dev *input_dev;
+	int error;
+	int pipe, maxp;
+
+	/* we control interface 0 */
+	if (intf->cur_altsetting->desc.bInterfaceNumber == 1)
+		return -ENODEV;
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	pegasus = kzalloc(sizeof(*pegasus), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pegasus || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	pegasus->usbdev = dev;
+	pegasus->dev = input_dev;
+
+	pegasus->data = usb_alloc_coherent(dev, endpoint->wMaxPacketSize,
+					   GFP_KERNEL, &pegasus->data_dma);
+	if (!pegasus->data) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	pegasus->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->irq) {
+		error = -ENOMEM;
+		goto err_free_dma;
+	}
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+	pegasus->data_len = maxp;
+
+	usb_fill_int_urb(pegasus->irq, dev, pipe, pegasus->data, maxp,
+			 pegasus_irq, pegasus, endpoint->bInterval);
+
+	pegasus->irq->transfer_dma = pegasus->data_dma;
+	pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	if (dev->manufacturer)
+		strlcpy(pegasus->name, dev->manufacturer,
+			sizeof(pegasus->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(pegasus->name, " ", sizeof(pegasus->name));
+		strlcat(pegasus->name, dev->product, sizeof(pegasus->name));
+	}
+
+	if (!strlen(pegasus->name))
+		snprintf(pegasus->name, sizeof(pegasus->name),
+			 "USB Pegasus Device %04x:%04x",
+			 le16_to_cpu(dev->descriptor.idVendor),
+			 le16_to_cpu(dev->descriptor.idProduct));
+
+	usb_make_path(dev, pegasus->phys, sizeof(pegasus->phys));
+	strlcat(pegasus->phys, "/input0", sizeof(pegasus->phys));
+
+	INIT_WORK(&pegasus->init, pegasus_init);
+
+	usb_set_intfdata(intf, pegasus);
+
+	input_dev->name = pegasus->name;
+	input_dev->phys = pegasus->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, pegasus);
+
+	input_dev->open = pegasus_open;
+	input_dev->close = pegasus_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	__set_bit(ABS_X, input_dev->absbit);
+	__set_bit(ABS_Y, input_dev->absbit);
+
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	__set_bit(BTN_RIGHT, input_dev->keybit);
+	__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+
+	__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+	__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	input_set_abs_params(input_dev, ABS_X, -1500, 1500, 8, 0);
+	input_set_abs_params(input_dev, ABS_Y, 1600, 3000, 8, 0);
+
+	pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE);
+
+	error = input_register_device(pegasus->dev);
+	if (error)
+		goto err_free_urb;
+
+	return 0;
+
+err_free_urb:
+	usb_free_urb(pegasus->irq);
+err_free_dma:
+	usb_free_coherent(dev, pegasus->data_len,
+			  pegasus->data, pegasus->data_dma);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(pegasus);
+	usb_set_intfdata(intf, NULL);
+
+	return error;
+}
+
+static void pegasus_disconnect(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	input_unregister_device(pegasus->dev);
+
+	usb_free_urb(pegasus->irq);
+	usb_free_coherent(interface_to_usbdev(intf),
+			  pegasus->data_len, pegasus->data,
+			  pegasus->data_dma);
+	kfree(pegasus);
+	usb_set_intfdata(intf, NULL);
+}
+
+static const struct usb_device_id pegasus_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_PEGASUSTECH,
+		     USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, pegasus_ids);
+
+static struct usb_driver pegasus_driver = {
+	.name		= "pegasus_notetaker",
+	.probe		= pegasus_probe,
+	.disconnect	= pegasus_disconnect,
+	.id_table	= pegasus_ids,
+};
+
+module_usb_driver(pegasus_driver);
+
+MODULE_AUTHOR("Martin Kepplinger <martink@posteo.de>");
+MODULE_DESCRIPTION("Pegasus Mobile Notetaker Pen tablet driver");
+MODULE_LICENSE("GPL");
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH v5] input: tablet: add Pegasus Notetaker tablet driver
  2016-05-27  9:46 [PATCH v5] input: tablet: add Pegasus Notetaker tablet driver Martin Kepplinger
  2016-05-27 18:34 ` Martin Kepplinger
@ 2016-05-27 21:59 ` Dmitry Torokhov
  2016-05-28 10:37   ` Martin Kepplinger
  1 sibling, 1 reply; 4+ messages in thread
From: Dmitry Torokhov @ 2016-05-27 21:59 UTC (permalink / raw)
  To: Martin Kepplinger; +Cc: linux-kernel, linux-input, kernel-testers, linux-usb

Hi Martin,

On Fri, May 27, 2016 at 11:46:21AM +0200, Martin Kepplinger wrote:
> This adds a driver for the Pegasus Notetaker Pen. When connected,
> this uses the Pen as an input tablet.
> 
> This device was sold in various different brandings, for example
> 	"Pegasus Mobile Notetaker M210",
> 	"Genie e-note The Notetaker",
> 	"Staedtler Digital ballpoint pen 990 01",
> 	"IRISnotes Express" or
> 	"NEWLink Digital Note Taker".
> 
> Here's an example, so that you know what we are talking about:
> http://www.staedtler.com/en/products/ink-writing-instruments/ballpoint-pens/digital-pen-990-01-digital-ballpoint-pen
> 
> http://pegatech.blogspot.com/ seems to be a remaining official resource.
> 
> This device can also transfer saved (offline recorded handwritten) data and
> there are userspace programs that do this, see https://launchpad.net/m210
> (Well, alternatively there are really fast scanners out there :)
> 
> It's *really* fun to use as an input tablet though! So let's support this
> for everybody.
> 
> There's no way to disable the device. When the pen is out of range, we just
> don't get any URBs and don't do anything.
> Like all other mouses or input tablets, we don't use runtime PM.
> 
> Signed-off-by: Martin Kepplinger <martink@posteo.de>
> ---
> 
> Thanks for reviewing! Dmitry's and Oliver's changes to v4 made it even
> smaller now. All is tested again and should apply to any recent tree.
> If not, please just complain.

Couple of minor comments:

> +
> +static void pegasus_control_msg(struct pegasus *pegasus, u8 *data, int len)
> +{
> +	const int sizeof_buf = len * sizeof(u8) + 2;

Just do "len + 2".

> +static void pegasus_parse_packet(struct pegasus *pegasus)
> +{
> +	unsigned char *data = pegasus->data;
> +	struct input_dev *dev = pegasus->dev;
> +	u16 x, y;
> +
> +	switch (data[0]) {
> +	case SPECIAL_COMMAND:
> +		/* device button pressed */
> +		if (data[1] == BUTTON_PRESSED)
> +			schedule_work(&pegasus->init);
> +
> +		break;
> +	/* xy data */
> +	case BATTERY_LOW:
> +		dev_warn_once(&dev->dev, "Pen battery low\n");
> +	case BATTERY_NO_REPORT:
> +	case BATTERY_GOOD:
> +		x = le16_to_cpup((__le16 *)&data[2]);
> +		y = le16_to_cpup((__le16 *)&data[4]);
> +
> +		/* ignore pen up events */
> +		if (x == 0 && y == 0)

Why are we ignoring pen-up events? I'd at least send
EV_KEY/BTN_TOOL_PEN/0 and maybe the rest of BTN* events.

> +			break;
> +
> +		input_report_key(dev, BTN_TOUCH, data[1] & PEN_TIP);
> +		input_report_key(dev, BTN_RIGHT, data[1] & PEN_BUTTON_PRESSED);
> +		input_report_key(dev, BTN_TOOL_PEN, 1);
> +		input_report_abs(dev, ABS_X, (s16)x);
> +		input_report_abs(dev, ABS_Y, y);
> +
> +		input_sync(dev);
> +		break;
> +	default:
> +		dev_warn_once(&pegasus->usbdev->dev,
> +			      "unknown answer from device\n");
> +	}
> +}
> +
> +static void pegasus_irq(struct urb *urb)
> +{
> +	struct pegasus *pegasus = urb->context;
> +	struct usb_device *dev = pegasus->usbdev;
> +	int retval;
> +
> +	switch (urb->status) {
> +	case 0:
> +		pegasus_parse_packet(pegasus);
> +		usb_mark_last_busy(pegasus->usbdev);

Since the driver does not use runtime-PM I do not think you need to call
usb_mark_last_busy().

> +static int pegasus_probe(struct usb_interface *intf,
> +			 const struct usb_device_id *id)
> +{
> +	struct usb_device *dev = interface_to_usbdev(intf);
> +	struct usb_endpoint_descriptor *endpoint;
> +	struct pegasus *pegasus;
> +	struct input_dev *input_dev;
> +	int error;
> +	int pipe, maxp;
> +
> +	/* we control interface 0 */
> +	if (intf->cur_altsetting->desc.bInterfaceNumber == 1)
> +		return -ENODEV;

Please add:

	/* Sanity check that the device has an endpoint */
	if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
		dev_err(&usbinterface->dev, "Invalid number of endpoints\n");
		return -EINVAL;
	}

Thanks.

-- 
Dmitry

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v5] input: tablet: add Pegasus Notetaker tablet driver
  2016-05-27 21:59 ` Dmitry Torokhov
@ 2016-05-28 10:37   ` Martin Kepplinger
  0 siblings, 0 replies; 4+ messages in thread
From: Martin Kepplinger @ 2016-05-28 10:37 UTC (permalink / raw)
  To: Dmitry Torokhov; +Cc: linux-kernel, linux-input, kernel-testers, linux-usb

Hi Dmitry,

Thanks again for your help! Only one comment below...

Am 2016-05-27 um 23:59 schrieb Dmitry Torokhov:
> Hi Martin,
> 

>> +static void pegasus_parse_packet(struct pegasus *pegasus)
>> +{
>> +	unsigned char *data = pegasus->data;
>> +	struct input_dev *dev = pegasus->dev;
>> +	u16 x, y;
>> +
>> +	switch (data[0]) {
>> +	case SPECIAL_COMMAND:
>> +		/* device button pressed */
>> +		if (data[1] == BUTTON_PRESSED)
>> +			schedule_work(&pegasus->init);
>> +
>> +		break;
>> +	/* xy data */
>> +	case BATTERY_LOW:
>> +		dev_warn_once(&dev->dev, "Pen battery low\n");
>> +	case BATTERY_NO_REPORT:
>> +	case BATTERY_GOOD:
>> +		x = le16_to_cpup((__le16 *)&data[2]);
>> +		y = le16_to_cpup((__le16 *)&data[4]);
>> +
>> +		/* ignore pen up events */
>> +		if (x == 0 && y == 0)
> 
> Why are we ignoring pen-up events? I'd at least send
> EV_KEY/BTN_TOOL_PEN/0 and maybe the rest of BTN* events.

I tried a few things, but I found them not to be useful in our case. To
the contrary, they seem to happen at random (or wrongly) too. They seem
to be there to seperate lines in drawings or whatever, but I'm not sure
exactly when they are valuable.

As an input device I get the best user experience when we ignore them. I
don't want them to break "clicking" or the like.

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2016-05-28 10:37 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-27  9:46 [PATCH v5] input: tablet: add Pegasus Notetaker tablet driver Martin Kepplinger
2016-05-27 18:34 ` Martin Kepplinger
2016-05-27 21:59 ` Dmitry Torokhov
2016-05-28 10:37   ` Martin Kepplinger

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).