From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751672AbcFUJMG (ORCPT ); Tue, 21 Jun 2016 05:12:06 -0400 Received: from regular1.263xmail.com ([211.150.99.131]:38382 "EHLO regular1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751630AbcFUJL5 (ORCPT ); Tue, 21 Jun 2016 05:11:57 -0400 X-263anti-spam: KSV:0; X-MAIL-GRAY: 0 X-MAIL-DELIVERY: 1 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-ADDR-CHECKED: 0 X-RL-SENDER: wulf@rock-chips.com X-FST-TO: heiko@sntech.de X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: wulf@rock-chips.com X-UNIQUE-TAG: <39b8707a43a7524b3825d5dd494161e4> X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 Message-ID: <576904D0.6060005@rock-chips.com> Date: Tue, 21 Jun 2016 17:11:44 +0800 From: William Wu User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: =?ISO-8859-1?Q?Heiko_St=FCbner?= CC: gregkh@linuxfoundation.org, balbi@kernel.org, linux-rockchip@lists.infradead.org, briannorris@google.com, dianders@google.com, kever.yang@rock-chips.com, huangtao@rock-chips.com, frank.wang@rock-chips.com, eddie.cai@rock-chips.com, John.Youn@synopsys.com, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, sergei.shtylyov@cogentembedded.com Subject: Re: [PATCH v4 5/5] usb: dwc3: rockchip: add devicetree bindings documentation References: <1464870896-25612-1-git-send-email-william.wu@rock-chips.com> <12544596.GMXFpFZvx9@phil> <5763C083.2030304@rock-chips.com> <4674233.DVms812T4a@diego> In-Reply-To: <4674233.DVms812T4a@diego> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Dear Heiko, On 06/20/2016 10:44 PM, Heiko Stübner wrote: > Hi William, > > Am Freitag, 17. Juni 2016, 17:18:59 schrieb William Wu: >> On 06/17/2016 07:15 AM, Heiko Stübner wrote: >>> Am Donnerstag, 2. Juni 2016, 20:34:56 schrieb William Wu: >>>> This patch adds the devicetree documentation required for Rockchip >>>> USB3.0 core wrapper consisting of USB3.0 IP from Synopsys. >>>> >>>> It supports DRD mode, and could operate in device mode (SS, HS, FS) >>>> and host mode (SS, HS, FS, LS). >>>> >>>> Signed-off-by: William Wu > [...] > >>>> +Optional clocks: >>>> + "aclk_usb3otg0" Aclk for specific usb controller clock. > what does this clock do? Also most likely same argument as below. Here is partial rk3399 clk tree about usb3: aclk_usb3 7 7 297000000 0 0 aclk_usb3_grf 1 1 297000000 0 0 aclk_usb3_rksoc_axi_perf 1 1 297000000 0 0 aclk_usb3otg1 1 1 297000000 0 0 aclk_usb3otg0 1 1 297000000 0 0 aclk_usb3_noc 1 1 297000000 0 0 from the clk tree, and check with our IC designers, we can see that: 1. aclk_usb3 is the parent clk of aclk_usb3**** 2. aclk_usb3_grf is used for both otg0 and otg1 grf, and these usb3 grf can be set to control otg0 and otg1 controller, but not the phy. 3. aclk_usb3otg1 is otg1 controller clk, aclk_usb3otg0 is otg0 controller clk. 4. aclk_usb3_rksoc_axi_perf is the clk for usb3 performance monitor module. 5. aclk_usb3_noc is the clk for soc bus interconnect. > >>>> + "aclk_usb3_rksoc_axi_perf" USB AXI perf clock. Not present on all >>>> platforms. >>> The clock names looks pretty strange. What are they for? Especially as >>> nothing seems to use them right now. >> "aclk_usb3_rksoc_axi_perf", it's the clk for usb3 performance monitor >> module, you can refer to the GRF_USB3_PERF_xxx. And we don't use the usb3 >> performance monitor control registers right now. > ok, then I'd suggest not defining the clock for now. > > For one, there are more perf blocks in the GRF (usb3, pcie, hdcp22, gmac, gpu, > etc) which all seem to share a somewhat similar design, so they will maybe > result in a separate driver of some form for the performance monitors. > > And secondly, it is somewhat easy to add new optional properties, but you > cannot remove anything defined previously. So if we later decide to handle all > the performance monitors differently, you can't remove that clock from the > binding again. (or at least only with quite a bit of hassle). > > So as this clock isn't used at all yet, I guess it should not get included > now. Yes, I agree with you. We can remove the aclk_usb3_rksoc_axi_perf right now. > >>>> + "aclk_usb3_grf" USB grf clock. Not present on all platforms. >>> for my own education, which part of the GRF does this clock supply? >> "aclk_usb3_grf", it's the clk for USB3 grf, e.g. GRF_USB3OTGX_CONX > Hmm, this looks more like it belongs to the otg phy? > Anyway, also seems unused right now, so same argument as above applies here. As I have described above, the "aclk_usb3_grf" is used for both otg0 and otg1 grf, and these usb3 grf can be set to control otg0 and otg1 controller, but not the phy. And we have done a test that remove the grf clk, and the result showed that usb3 controller can't work normally. So I think we need the usb3 grf clk. So about the usb3 controller clk management, I think it should contain the following clk: 1. aclk_usb3otg1 2. aclk_usb3otg0 3. aclk_usb3_grf 4. aclk_usb3_noc For "aclk_usb3_noc", I discuss with our clk manager, the clk is always on before, but according to upstream maintainer's suggestion, we need to manage the noc clk by each module. and the follow two clk can be removed: 1. aclk_usb3 2. aclk_usb3_rksoc_axi_perf Is it ok? > > > Heiko > > >