From: Frederic Barrat <fbarrat@linux.ibm.com>
To: "Alastair D'Silva" <alastair@au1.ibm.com>, alastair@d-silva.org
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>,
Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/5] ocxl: Clean up printf formats
Date: Wed, 27 Feb 2019 14:40:02 +0100 [thread overview]
Message-ID: <577c579a-5bf8-45e6-c5f7-67aa00931e59@linux.ibm.com> (raw)
In-Reply-To: <20190227045741.21412-3-alastair@au1.ibm.com>
Le 27/02/2019 à 05:57, Alastair D'Silva a écrit :
> From: Alastair D'Silva <alastair@d-silva.org>
>
> Use %# instead of using a literal '0x'
>
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
I don't really care either way, but it looks ok.
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
> drivers/misc/ocxl/config.c | 6 +++---
> drivers/misc/ocxl/context.c | 2 +-
> drivers/misc/ocxl/trace.h | 10 +++++-----
> 3 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/misc/ocxl/config.c b/drivers/misc/ocxl/config.c
> index 8f2c5d8bd2ee..0ee7856b033d 100644
> --- a/drivers/misc/ocxl/config.c
> +++ b/drivers/misc/ocxl/config.c
> @@ -178,9 +178,9 @@ static int read_dvsec_vendor(struct pci_dev *dev)
> pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_DLX_VERS, &dlx);
>
> dev_dbg(&dev->dev, "Vendor specific DVSEC:\n");
> - dev_dbg(&dev->dev, " CFG version = 0x%x\n", cfg);
> - dev_dbg(&dev->dev, " TLX version = 0x%x\n", tlx);
> - dev_dbg(&dev->dev, " DLX version = 0x%x\n", dlx);
> + dev_dbg(&dev->dev, " CFG version = %#x\n", cfg);
> + dev_dbg(&dev->dev, " TLX version = %#x\n", tlx);
> + dev_dbg(&dev->dev, " DLX version = %#x\n", dlx);
> return 0;
> }
>
> diff --git a/drivers/misc/ocxl/context.c b/drivers/misc/ocxl/context.c
> index c10a940e3b38..3498a0199bde 100644
> --- a/drivers/misc/ocxl/context.c
> +++ b/drivers/misc/ocxl/context.c
> @@ -134,7 +134,7 @@ static vm_fault_t ocxl_mmap_fault(struct vm_fault *vmf)
> vm_fault_t ret;
>
> offset = vmf->pgoff << PAGE_SHIFT;
> - pr_debug("%s: pasid %d address 0x%lx offset 0x%llx\n", __func__,
> + pr_debug("%s: pasid %d address %#lx offset %#llx\n", __func__,
> ctx->pasid, vmf->address, offset);
>
> if (offset < ctx->afu->irq_base_offset)
> diff --git a/drivers/misc/ocxl/trace.h b/drivers/misc/ocxl/trace.h
> index bcb7ff330c1e..8d2f53812edd 100644
> --- a/drivers/misc/ocxl/trace.h
> +++ b/drivers/misc/ocxl/trace.h
> @@ -28,7 +28,7 @@ DECLARE_EVENT_CLASS(ocxl_context,
> __entry->tidr = tidr;
> ),
>
> - TP_printk("linux pid=%d spa=0x%p pasid=0x%x pidr=0x%x tidr=0x%x",
> + TP_printk("linux pid=%d spa=%p pasid=%#x pidr=%#x tidr=%#x",
> __entry->pid,
> __entry->spa,
> __entry->pasid,
> @@ -61,7 +61,7 @@ TRACE_EVENT(ocxl_terminate_pasid,
> __entry->rc = rc;
> ),
>
> - TP_printk("pasid=0x%x rc=%d",
> + TP_printk("pasid=%#x rc=%d",
> __entry->pasid,
> __entry->rc
> )
> @@ -87,7 +87,7 @@ DECLARE_EVENT_CLASS(ocxl_fault_handler,
> __entry->tfc = tfc;
> ),
>
> - TP_printk("spa=%p pe=0x%llx dsisr=0x%llx dar=0x%llx tfc=0x%llx",
> + TP_printk("spa=%p pe=%#llx dsisr=%#llx dar=%#llx tfc=%#llx",
> __entry->spa,
> __entry->pe,
> __entry->dsisr,
> @@ -127,7 +127,7 @@ TRACE_EVENT(ocxl_afu_irq_alloc,
> __entry->irq_offset = irq_offset;
> ),
>
> - TP_printk("pasid=0x%x irq_id=%d virq=%u hw_irq=%d irq_offset=0x%llx",
> + TP_printk("pasid=%#x irq_id=%d virq=%u hw_irq=%d irq_offset=0x%llx",
> __entry->pasid,
> __entry->irq_id,
> __entry->virq,
> @@ -150,7 +150,7 @@ TRACE_EVENT(ocxl_afu_irq_free,
> __entry->irq_id = irq_id;
> ),
>
> - TP_printk("pasid=0x%x irq_id=%d",
> + TP_printk("pasid=%#x irq_id=%d",
> __entry->pasid,
> __entry->irq_id
> )
>
next prev parent reply other threads:[~2019-02-27 13:40 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-27 4:57 [PATCH 0/5] ocxl: OpenCAPI Cleanup Alastair D'Silva
2019-02-27 4:57 ` [PATCH 1/5] ocxl: Rename struct link to ocxl_link Alastair D'Silva
2019-02-27 7:15 ` Andrew Donnellan
2019-02-27 7:34 ` Alastair D'Silva
2019-02-27 7:54 ` Andrew Donnellan
2019-02-27 8:04 ` Alastair D'Silva
2019-02-27 8:18 ` Andrew Donnellan
2019-02-27 13:45 ` Frederic Barrat
2019-02-27 13:59 ` Greg Kurz
2019-02-27 13:53 ` Greg Kurz
2019-02-27 4:57 ` [PATCH 2/5] ocxl: Clean up printf formats Alastair D'Silva
2019-02-27 13:40 ` Frederic Barrat [this message]
2019-02-28 5:02 ` Andrew Donnellan
2019-03-02 1:13 ` Joe Perches
2019-02-27 4:57 ` [PATCH 3/5] ocxl: read_pasid never returns an error, so make it void Alastair D'Silva
2019-02-27 13:25 ` Frederic Barrat
2019-02-28 5:03 ` Andrew Donnellan
2019-02-27 4:57 ` [PATCH 4/5] ocxl: Remove superfluous 'extern' from headers Alastair D'Silva
2019-02-27 13:36 ` Frederic Barrat
2019-02-28 5:05 ` Andrew Donnellan
2019-02-27 4:57 ` [PATCH 5/5] ocxl: Remove some unused exported symbols Alastair D'Silva
2019-02-27 13:39 ` Frederic Barrat
2019-02-28 5:23 ` Andrew Donnellan
2019-03-13 4:06 ` [PATCH v2 0/5] ocxl: OpenCAPI Cleanup Alastair D'Silva
2019-03-13 4:06 ` [PATCH 1/5] ocxl: Rename struct link to ocxl_link Alastair D'Silva
2019-03-15 6:58 ` Andrew Donnellan
2019-03-13 4:06 ` [PATCH 2/5] ocxl: Clean up printf formats Alastair D'Silva
2019-03-13 8:24 ` Greg Kurz
2019-03-14 4:58 ` Andrew Donnellan
2019-03-13 4:06 ` [PATCH 3/5] ocxl: read_pasid never returns an error, so make it void Alastair D'Silva
2019-03-14 4:59 ` Andrew Donnellan
2019-03-13 4:07 ` [PATCH 4/5] ocxl: Remove superfluous 'extern' from headers Alastair D'Silva
2019-03-13 8:28 ` Greg Kurz
2019-03-14 5:08 ` Andrew Donnellan
2019-03-13 4:07 ` [PATCH 5/5] ocxl: Remove some unused exported symbols Alastair D'Silva
2019-03-13 9:10 ` Greg Kurz
2019-03-14 2:23 ` Alastair D'Silva
2019-03-14 6:50 ` Greg Kurz
2019-03-15 4:49 ` Andrew Donnellan
2019-03-15 5:07 ` Andrew Donnellan
2019-03-20 5:34 ` [PATCH v3 0/5] ocxl: OpenCAPI Cleanup Alastair D'Silva
2019-03-20 5:34 ` [PATCH v3 1/5] ocxl: Rename struct link to ocxl_link Alastair D'Silva
2019-03-20 5:34 ` [PATCH v3 2/5] ocxl: Clean up printf formats Alastair D'Silva
2019-03-20 17:24 ` Joe Perches
2019-03-20 5:34 ` [PATCH v3 3/5] ocxl: read_pasid never returns an error, so make it void Alastair D'Silva
2019-03-20 5:34 ` [PATCH v3 4/5] ocxl: Remove superfluous 'extern' from headers Alastair D'Silva
2019-03-20 5:34 ` [PATCH v3 5/5] ocxl: Remove some unused exported symbols Alastair D'Silva
2019-03-25 5:34 ` [PATCH v4 0/4] ocxl: OpenCAPI Cleanup Alastair D'Silva
2019-03-25 5:34 ` [PATCH v4 1/4] ocxl: Rename struct link to ocxl_link Alastair D'Silva
2019-04-03 14:18 ` Frederic Barrat
2019-04-05 7:05 ` Andrew Donnellan
2019-05-03 6:59 ` Michael Ellerman
2019-03-25 5:34 ` [PATCH v4 2/4] ocxl: read_pasid never returns an error, so make it void Alastair D'Silva
2019-04-03 14:20 ` Frederic Barrat
2019-04-05 7:05 ` Andrew Donnellan
2019-03-25 5:34 ` [PATCH v4 3/4] ocxl: Remove superfluous 'extern' from headers Alastair D'Silva
2019-03-25 16:55 ` Greg Kurz
2019-04-03 14:20 ` Frederic Barrat
2019-04-05 7:09 ` Andrew Donnellan
2019-03-25 5:34 ` [PATCH v4 4/4] ocxl: Remove some unused exported symbols Alastair D'Silva
2019-03-25 16:57 ` Greg Kurz
2019-04-03 14:23 ` Frederic Barrat
2019-04-05 7:28 ` Andrew Donnellan
2019-03-25 16:49 ` [PATCH v4 0/4] ocxl: OpenCAPI Cleanup Greg Kurz
2019-03-25 17:34 ` Frederic Barrat
2019-03-25 21:45 ` Alastair D'Silva
2019-03-25 5:44 ` [PATCH v3 0/7] Refactor OCXL driver to allow external drivers to use it Alastair D'Silva
2019-03-25 5:44 ` [PATCH v3 1/7] ocxl: Split pci.c Alastair D'Silva
2019-03-25 10:01 ` Frederic Barrat
2019-03-25 5:44 ` [PATCH v3 2/7] ocxl: Don't pass pci_dev around Alastair D'Silva
2019-03-25 10:04 ` Frederic Barrat
2019-03-25 5:44 ` [PATCH v3 3/7] ocxl: Create a clear delineation between ocxl backend & frontend Alastair D'Silva
2019-03-25 15:11 ` Frederic Barrat
2019-03-25 5:44 ` [PATCH v3 4/7] ocxl: Allow external drivers to use OpenCAPI contexts Alastair D'Silva
2019-03-25 15:13 ` Frederic Barrat
2019-03-25 5:44 ` [PATCH v3 5/7] ocxl: afu_irq only deals with IRQ IDs, not offsets Alastair D'Silva
2019-03-25 15:24 ` Frederic Barrat
2019-03-25 5:44 ` [PATCH v3 6/7] ocxl: move event_fd handling to frontend Alastair D'Silva
2019-03-25 15:41 ` Frederic Barrat
2019-03-25 5:44 ` [PATCH v3 7/7] ocxl: Provide global MMIO accessors for external drivers Alastair D'Silva
2019-03-25 15:49 ` Frederic Barrat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=577c579a-5bf8-45e6-c5f7-67aa00931e59@linux.ibm.com \
--to=fbarrat@linux.ibm.com \
--cc=alastair@au1.ibm.com \
--cc=alastair@d-silva.org \
--cc=andrew.donnellan@au1.ibm.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).