linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	Sui Jingfeng <suijingfeng@loongson.cn>
Subject: [PATCH v2] drm/fb-helper: Fix height, width, and accel_flags in fb_var
Date: Tue, 23 May 2023 17:06:20 +0200	[thread overview]
Message-ID: <57e6b334dae8148b1b8ae6ef308ce9a83810a850.1684854344.git.geert+renesas@glider.be> (raw)

Fbtest contains some very simple validation of the fbdev userspace API
contract.  When used with shmob-drm, it reports the following warnings
and errors:

    height changed from 68 to 0
    height was rounded down
    width changed from 111 to 0
    width was rounded down
    accel_flags changed from 0 to 1

The first part happens because __fill_var() resets the physical
dimensions of the first connector, as filled in by drm_setup_crtcs_fb().
Fix this by retaining the original values.

The last part happens because __fill_var() forces the FB_ACCELF_TEXT
flag on, while fbtest disables all acceleration on purpose, so it can
draw safely to the frame buffer.  Fix this by setting accel_flags to
zero, as DRM does not implement any text console acceleration.
Note that this issue can also be seen in the output of fbset, which
reports "accel true".

Fixes: ee4cce0a8f03a333 ("drm/fb-helper: fix input validation gaps in check_var")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
---
v2:
  - Add Reviewed-by, Tested-by.
---
 drivers/gpu/drm/drm_fb_helper.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index f0e9549b6bd751de..8dc376b771d2cf22 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -1379,17 +1379,19 @@ static void drm_fb_helper_fill_pixel_fmt(struct fb_var_screeninfo *var,
 	}
 }
 
-static void __fill_var(struct fb_var_screeninfo *var,
+static void __fill_var(struct fb_var_screeninfo *var, struct fb_info *info,
 		       struct drm_framebuffer *fb)
 {
 	int i;
 
 	var->xres_virtual = fb->width;
 	var->yres_virtual = fb->height;
-	var->accel_flags = FB_ACCELF_TEXT;
+	var->accel_flags = 0;
 	var->bits_per_pixel = drm_format_info_bpp(fb->format, 0);
 
-	var->height = var->width = 0;
+	var->height = info->var.height;
+	var->width = info->var.width;
+
 	var->left_margin = var->right_margin = 0;
 	var->upper_margin = var->lower_margin = 0;
 	var->hsync_len = var->vsync_len = 0;
@@ -1452,7 +1454,7 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
-	__fill_var(var, fb);
+	__fill_var(var, info, fb);
 
 	/*
 	 * fb_pan_display() validates this, but fb_set_par() doesn't and just
@@ -1908,7 +1910,7 @@ static void drm_fb_helper_fill_var(struct fb_info *info,
 	info->pseudo_palette = fb_helper->pseudo_palette;
 	info->var.xoffset = 0;
 	info->var.yoffset = 0;
-	__fill_var(&info->var, fb);
+	__fill_var(&info->var, info, fb);
 	info->var.activate = FB_ACTIVATE_NOW;
 
 	drm_fb_helper_fill_pixel_fmt(&info->var, format);
-- 
2.34.1


             reply	other threads:[~2023-05-23 15:06 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-23 15:06 Geert Uytterhoeven [this message]
2023-05-24 11:41 ` [PATCH v2] drm/fb-helper: Fix height, width, and accel_flags in fb_var Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57e6b334dae8148b1b8ae6ef308ce9a83810a850.1684854344.git.geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=airlied@gmail.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=javierm@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=suijingfeng@loongson.cn \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).