linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chris Zhong <zyw@rock-chips.com>
To: Sean Paul <seanpaul@chromium.org>
Cc: dianders@chromium.org, tfiga@chromium.org, heiko@sntech.de,
	yzq@rock-chips.com, mark.rutland@arm.com,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	galak@codeaurora.org, pawel.moll@arm.com,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 3/5] drm/rockchip/dsi: remove mode_valid function
Date: Tue, 24 Jan 2017 10:27:27 +0800	[thread overview]
Message-ID: <5886BB8F.6040707@rock-chips.com> (raw)
In-Reply-To: <20170123174841.GB25789@trickycodes.roam.corp.google.com>

Hi Sean

On 01/24/2017 01:48 AM, Sean Paul wrote:
> On Fri, Jan 20, 2017 at 06:10:49PM +0800, Chris Zhong wrote:
>> The MIPI DSI do not need check the validity of resolution, the max
>> resolution should depend VOP. Hence, remove rk3288_mipi_dsi_mode_valid
>> here.
> Does vop actually enforce this, though? I see that mode_config.max_width is
> 4096, but there is no bounds checking in mode_fixup().
>
> The connector is currently rejecting everything greater than 2047. So I think
> you're going to regress behavior here.
>
> Sean
The mipi controller has not this width limit, it depend the VOP, such as 
RK3399, VOP_LIT only support 2560,
but VOP_BIG support 4K. So this driver should check the width here.

>
>
>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>> ---
>>
>> Changes in v3: None
>>
>>   drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 39 ----------------------------------
>>   1 file changed, 39 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> index a93ce97..6f0e252 100644
>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> @@ -278,8 +278,6 @@ struct dw_mipi_dsi_plat_data {
>>   	u32 grf_dsi0_mode;
>>   	u32 grf_dsi0_mode_reg;
>>   	unsigned int max_data_lanes;
>> -	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
>> -					   struct drm_display_mode *mode);
>>   };
>>   
>>   struct dw_mipi_dsi {
>> @@ -1081,23 +1079,8 @@ static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
>>   	return drm_panel_get_modes(dsi->panel);
>>   }
>>   
>> -static enum drm_mode_status dw_mipi_dsi_mode_valid(
>> -					struct drm_connector *connector,
>> -					struct drm_display_mode *mode)
>> -{
>> -	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> -
>> -	enum drm_mode_status mode_status = MODE_OK;
>> -
>> -	if (dsi->pdata->mode_valid)
>> -		mode_status = dsi->pdata->mode_valid(connector, mode);
>> -
>> -	return mode_status;
>> -}
>> -
>>   static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
>>   	.get_modes = dw_mipi_dsi_connector_get_modes,
>> -	.mode_valid = dw_mipi_dsi_mode_valid,
>>   };
>>   
>>   static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
>> @@ -1168,33 +1151,11 @@ static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
>>   	return 0;
>>   }
>>   
>> -static enum drm_mode_status rk3288_mipi_dsi_mode_valid(
>> -					struct drm_connector *connector,
>> -					struct drm_display_mode *mode)
>> -{
>> -	/*
>> -	 * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
>> -	 * register is 11-bit.
>> -	 */
>> -	if (mode->hdisplay > 0x7ff)
>> -		return MODE_BAD_HVALUE;
>> -
>> -	/*
>> -	 * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
>> -	 * register is 11-bit.
>> -	 */
>> -	if (mode->vdisplay > 0x7ff)
>> -		return MODE_BAD_VVALUE;
>> -
>> -	return MODE_OK;
>> -}
>> -
>>   static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
>>   	.dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
>>   	.dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
>>   	.grf_switch_reg = RK3288_GRF_SOC_CON6,
>>   	.max_data_lanes = 4,
>> -	.mode_valid = rk3288_mipi_dsi_mode_valid,
>>   };
>>   
>>   static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = {
>> -- 
>> 2.6.3
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-01-24  2:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-20 10:10 [PATCH v3 0/5] Rockchip dw-mipi-dsi driver Chris Zhong
2017-01-20 10:10 ` [PATCH v3 1/5] dt-bindings: add rk3399 support for dw-mipi-rockchip Chris Zhong
2017-01-20 10:10 ` [PATCH v3 2/5] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi Chris Zhong
2017-01-23 17:30   ` Sean Paul
2017-01-20 10:10 ` [PATCH v3 3/5] drm/rockchip/dsi: remove mode_valid function Chris Zhong
2017-01-23 17:48   ` Sean Paul
2017-01-24  2:27     ` Chris Zhong [this message]
2017-02-01 18:12       ` Sean Paul
2017-02-05  3:42         ` Chris Zhong
2017-02-05  7:42           ` Mark yao
2017-01-20 10:10 ` [PATCH v3 4/5] dt-bindings: add power domain node for dw-mipi-rockchip Chris Zhong
2017-01-20 10:10 ` [PATCH v3 5/5] drm/rockchip/dsi: add dw-mipi power domain support Chris Zhong
2017-01-23 18:03   ` Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5886BB8F.6040707@rock-chips.com \
    --to=zyw@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=galak@codeaurora.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=seanpaul@chromium.org \
    --cc=tfiga@chromium.org \
    --cc=yzq@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).