From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753956AbdAZPfI (ORCPT ); Thu, 26 Jan 2017 10:35:08 -0500 Received: from lelnx194.ext.ti.com ([198.47.27.80]:63003 "EHLO lelnx194.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752794AbdAZPfG (ORCPT ); Thu, 26 Jan 2017 10:35:06 -0500 Subject: Re: [PATCH v2 0/4] USB support for Broadcom NSP SoC To: Yendapally Reddy Dhananjaya Reddy , Rob Herring , Mark Rutland , Russell King , Ray Jui , Scott Branden , Jon Mason , Florian Fainelli References: <1484669670-4201-1-git-send-email-yendapally.reddy@broadcom.com> CC: , , , , From: Kishon Vijay Abraham I Message-ID: <588A16FA.50507@ti.com> Date: Thu, 26 Jan 2017 21:04:18 +0530 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.7.2 MIME-Version: 1.0 In-Reply-To: <1484669670-4201-1-git-send-email-yendapally.reddy@broadcom.com> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tuesday 17 January 2017 09:44 PM, Yendapally Reddy Dhananjaya Reddy wrote: > This patch set contains the usb support for Broadcom NSP SoC. The > usb3 phy is internal to the SoC and is accessed through mdio interface. > The mdio interface can be used to access either internal usb3 phy or > external ethernet phy using a multiplexer. > > The first patch provides the documentation details for usb3 phy. The > second patch provides the changes to the mdio bus driver. The third > patch provides the phy driver and fourth patch provides the enable > method for usb. merged the 1st and 4th patch to linux-phy. Thanks Kishon > > This patch series has been tested on NSP bcm958625HR board. > This patch series is based on v4.10.0-rc3 and is available from > github-repo: https://github.com/Broadcom/cygnus-linux.git > branch:nsp-usb-v2 > > Changes in v2: > * Remove separate nsp mux driver as suggested by Andrew Lunn > * Addressed comments from Scott and Rob > > Yendapally Reddy Dhananjaya Reddy (4): > dt-bindings: phy: Add documentation for NSP USB3 PHY > net: phy: Initialize mdio clock at probe function > phy: Add USB3 PHY support for Broadcom NSP SoC > arm: dts: nsp: Add USB nodes to device tree > > .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt | 39 +++++ > arch/arm/boot/dts/bcm-nsp.dtsi | 56 +++++++ > arch/arm/boot/dts/bcm958625k.dts | 16 ++ > drivers/net/phy/mdio-bcm-iproc.c | 6 +- > drivers/phy/Kconfig | 8 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-bcm-nsp-usb3.c | 176 +++++++++++++++++++++ > 7 files changed, 298 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt > create mode 100644 drivers/phy/phy-bcm-nsp-usb3.c >