From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751740AbWBMKfH (ORCPT ); Mon, 13 Feb 2006 05:35:07 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751748AbWBMKfH (ORCPT ); Mon, 13 Feb 2006 05:35:07 -0500 Received: from nproxy.gmail.com ([64.233.182.195]:45118 "EHLO nproxy.gmail.com") by vger.kernel.org with ESMTP id S1751743AbWBMKfG convert rfc822-to-8bit (ORCPT ); Mon, 13 Feb 2006 05:35:06 -0500 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=bwKX78/bw1AxU+w6aLNSp7+B6J5RKctZWIfNMSBzAMxnUA7sUJpjJCZHT3Hg7frlgw9DO3QDPUIa7eeoX9lwTbiBN16ROEM38ZEhKvC2N8ponqDRbjm5l4257yjGblGfmDFQ2ZIHAjFXwWyWqsayalTtaGSkoPJ1jIDcY8PR8W4= Message-ID: <58cb370e0602130235h3ab521cep47584ee634e8fc7f@mail.gmail.com> Date: Mon, 13 Feb 2006 11:35:03 +0100 From: Bartlomiej Zolnierkiewicz To: Kumar Gala Subject: Re: RFC: Compact Flash True IDE Mode Driver Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Content-Disposition: inline References: Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, On 2/1/06, Kumar Gala wrote: > I was hoping to get some comments on this work in progress driver for > using a compact flash device running in True IDE Mode connect via a MMIO > interface. The driver is working, however the embedded system I'm running > on need some HW fixes to address the fact that the byte lanes for the data > are swapped. I figured now was a good time to incorporate any changes > while I wait for the HW fixes (which will allow me to remove the > cfide_outsw & cfide_insw). > > - kumar > > > diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig > index 1c81174..8334baf 100644 > --- a/drivers/ide/Kconfig > +++ b/drivers/ide/Kconfig > @@ -930,6 +930,12 @@ config BLK_DEV_Q40IDE > normally be on; disable it only if you are running a custom hard > drive subsystem through an expansion card. > > +config BLK_DEV_CFIDE > + tristate "Compact Flash in True IDE mode" depends on? > + help > + This is the IDE driver for a Memory Mapped Compact Flash Device > + running in True IDE mode. > + > config BLK_DEV_MPC8xx_IDE > bool "MPC8xx IDE support" > depends on 8xx && IDE=y && BLK_DEV_IDE=y > diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile > index 569fae7..09ed3aa 100644 > --- a/drivers/ide/Makefile > +++ b/drivers/ide/Makefile > @@ -32,6 +32,7 @@ ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += > ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o > ide-core-$(CONFIG_BLK_DEV_MAC_IDE) += legacy/macide.o > ide-core-$(CONFIG_BLK_DEV_Q40IDE) += legacy/q40ide.o > +ide-core-$(CONFIG_BLK_DEV_CFIDE) += legacy/cfide.o Won't fly. As comment in Makefile states "ide-core" is for built-in only drivers. Please see how ide-cs is handled. > # built-in only drivers from ppc/ > ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o > diff --git a/drivers/ide/legacy/cfide.c b/drivers/ide/legacy/cfide.c > new file mode 100644 > index 0000000..4444005 > --- /dev/null > +++ b/drivers/ide/legacy/cfide.c > @@ -0,0 +1,222 @@ > +/* > + * Compact Flash Memory Mapped True IDE mode driver > + * > + * Maintainer: Kumar Gala > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include Is this needed? > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include ditto > +static void __iomem *cfide_mapbase; > +static void __iomem *cfide_alt_mapbase; > + > +/* xxx: use standard outsw, insw when byte lanes swapped */ > +static void cfide_outsw(unsigned long port, void *addr, u32 count) > +{ > + _outsw((volatile u16 __iomem *)port, addr, count); > +} > + > +static void cfide_insw(unsigned long port, void *addr, u32 count) > +{ > + _insw((volatile u16 __iomem *)port, addr, count); > +} > + > +static void cfide_outl(u32 addr, unsigned long port) > +{ > + panic("outl unsupported"); > +} Can be removed as it is not used in any code-path for this controller. > +static void cfide_outsl(unsigned long port, void *addr, u32 count) > +{ > + panic("outsl unsupported"); > +} This will panic as soon as somebody tries to enable 32-bit I/O using hdparm. Please add ide_hwif_t.no_io_32bit flag and teach ide-disk.c:ide_disk_setup() about it (separate patch). > +static u32 cfide_inl(unsigned long port) > +{ > + panic("inl unsupported"); > + return 0; > +} same problem as with cfide_outl() > +static void cfide_insl(unsigned long port, void *addr, u32 count) > +{ > + panic("insl unsupported"); > +} same problem as with cfide_outsl() > +static ide_hwif_t *cfide_locate_hwif(void __iomem * base, void __iomem * ctrl, > + unsigned int sz, int irq) __devinit > +{ > + unsigned long port = (unsigned long)base; > + ide_hwif_t *hwif; > + int index, i; > + > + for (index = 0; index < MAX_HWIFS; ++index) { > + hwif = ide_hwifs + index; > + if (hwif->io_ports[IDE_DATA_OFFSET] == port) > + goto found; > + } > + > + for (index = 0; index < MAX_HWIFS; ++index) { > + hwif = ide_hwifs + index; > + if (hwif->io_ports[IDE_DATA_OFFSET] == 0) > + goto found; > + } > + > + return NULL; This is the same as in icside.c/rapide.c, it really should be generic helper (separate patch) > + found: > + > + /* xxx: fix when byte lanes are swapped */ > + hwif->hw.io_ports[IDE_DATA_OFFSET] = port; > + port += 3; > + for (i = IDE_ERROR_OFFSET; i <= IDE_STATUS_OFFSET; i++, port += sz) > + hwif->hw.io_ports[i] = port; > + > + hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl + 13; > + > + memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports)); > + hwif->hw.irq = hwif->irq = irq; > + > + hwif->hw.dma = NO_DMA; > + hwif->hw.chipset = ide_unknown; Please use ide_generic or add new type, ide_unknown indicates that this slot is free. > + hwif->mmio = 2; > + default_hwif_mmiops(hwif); > + hwif->OUTL = cfide_outl; = NULL; > + hwif->OUTSW = cfide_outsw; > + hwif->OUTSL = cfide_outsl; ditto > + hwif->INL = cfide_inl; ditto > + hwif->INSW = cfide_insw; > + hwif->INSL = cfide_insl; ditto > + return hwif; > +} > + > +static int __devinit cfide_lbus_probe(struct platform_device *dev) > +{ > + struct resource *res_base, *res_alt, *res_irq; > + ide_hwif_t *hwif; > + int ret = 0; > + > + /* get a pointer to the register memory */ > + res_base = platform_get_resource(dev, IORESOURCE_MEM, 0); > + res_alt = platform_get_resource(dev, IORESOURCE_MEM, 1); > + res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0); > + > + if ((!res_base) || (!res_alt) || (!res_irq)) { > + ret = -ENODEV; > + goto out; > + } > + > + if (!request_mem_region > + (res_base->start, res_base->end - res_base->start + 1, dev->name)) { > + pr_debug("%s: request_mem_region of base failed\n", dev->name); > + ret = -EBUSY; > + goto out; > + } > + > + if (!request_mem_region > + (res_alt->start, res_alt->end - res_alt->start + 1, dev->name)) { > + pr_debug("%s: request_mem_region of alt failed\n", dev->name); > + ret = -EBUSY; > + goto out; res_base needs to be freed > + } > + > + cfide_mapbase = > + ioremap(res_base->start, res_base->end - res_base->start + 1); > + if (!cfide_mapbase) { > + ret = -ENOMEM; > + goto out; res_base and res_alt need to be freed > + } > + > + cfide_alt_mapbase = > + ioremap(res_alt->start, res_alt->end - res_alt->start + 1); > + > + if (!cfide_alt_mapbase) { > + ret = -ENOMEM; > + goto unmap_base; > + } > + > + hwif = cfide_locate_hwif(cfide_mapbase, cfide_alt_mapbase, 2, > + res_irq->start); > + > + if (!hwif) { > + ret = -ENODEV; > + goto unmap_alt; > + } > + > + hwif->gendev.parent = &dev->dev; > + hwif->noprobe = 0; > + > + probe_hwif_init(hwif); create_proc_ide_interfaces() is missing > + platform_set_drvdata(dev, hwif); > + > + return 0; > + > + unmap_alt: > + iounmap(cfide_alt_mapbase); > + unmap_base: > + iounmap(cfide_mapbase); > + out: > + return ret; > +} > + > +static int __devexit cfide_lbus_remove(struct platform_device *dev) > +{ > + ide_hwif_t *hwif = platform_get_drvdata(dev); > + struct resource *res_base, *res_alt; > + > + /* get a pointer to the register memory */ > + res_base = platform_get_resource(dev, IORESOURCE_MEM, 0); > + res_alt = platform_get_resource(dev, IORESOURCE_MEM, 1); > + > + release_mem_region(res_base->start, res_base->end - res_base->start + 1); > + release_mem_region(res_alt->start, res_alt->end - res_alt->start + 1); > + > + platform_set_drvdata(dev, NULL); > + > + /* there must be a better way */ yes, fixing IDE unplug :) > + ide_unregister(hwif - ide_hwifs); Otherwise driver looks pretty decent and with the above changes it gets my ACK. Additional enhancements as suggested by Ben would be nice but obviously they are not needed for a start Thanks, Bartlomiej