[PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[Jim Quinlan]

v2:
Commit: "device core: Add ability to handle multiple dma offsets"
  o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
  o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
  o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
  o dev->dma_pfn_map => dev->dma_pfn_offset_map
  o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
  o In device.h: s/const void */const struct dma_pfn_offset_region */
  o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since
    guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
  o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now
    dev->dma_pfn_offset_map is copied as well.
  o Merged two of the DMA commits into one (Christoph).

Commit "arm: dma-mapping: Invoke dma offset func if needed":
  o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET

Other commits' changes:
  o Removed need for carrying of_id var in priv (Nicolas)
  o Commit message rewordings (Bjorn)
  o Commit log messages filled to 75 chars (Bjorn)
  o devm_reset_control_get_shared())
    => devm_reset_control_get_optional_shared (Philipp)
  o Add call to reset_control_assert() in PCIe remove routines (Philipp)

v1:
This patchset expands the usefulness of the Broadcom Settop Box PCIe
controller by building upon the PCIe driver used currently by the
Raspbery Pi.  Other forms of this patchset were submitted by me years
ago and not accepted; the major sticking point was the code required
for the DMA remapping needed for the PCIe driver to work [1].

There have been many changes to the DMA and OF subsystems since that
time, making a cleaner and less intrusive patchset possible.  This
patchset implements a generalization of "dev->dma_pfn_offset", except
that instead of a single scalar offset it provides for multiple
offsets via a function which depends upon the "dma-ranges" property of
the PCIe host controller.  This is required for proper functionality
of the BrcmSTB PCIe controller and possibly some other devices.

[1] https://lore.kernel.org/linux-arm-kernel/1516058925-46522-5-git-send-email-jim2101024@gmail.com/

Jim Quinlan (14):
  PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
  ata: ahci_brcm: Fix use of BCM7216 reset controller
  dt-bindings: PCI: Add bindings for more Brcmstb chips
  PCI: brcmstb: Add bcm7278 reigister info
  PCI: brcmstb: Add suspend and resume pm_ops
  PCI: brcmstb: Add bcm7278 PERST support
  PCI: brcmstb: Add control of rescal reset
  of: Include a dev param in of_dma_get_range()
  device core: Add ability to handle multiple dma offsets
  arm: dma-mapping: Invoke dma offset func if needed
  PCI: brcmstb: Set internal memory viewport sizes
  PCI: brcmstb: Accommodate MSI for older chips
  PCI: brcmstb: Set bus max burst size by chip type
  PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list

 .../bindings/pci/brcm,stb-pcie.yaml           |  40 +-
 arch/arm/include/asm/dma-mapping.h            |  13 +-
 drivers/ata/ahci_brcm.c                       |  14 +-
 drivers/of/address.c                          |  69 ++-
 drivers/of/device.c                           |   2 +-
 drivers/of/of_private.h                       |   8 +-
 drivers/pci/controller/Kconfig                |   3 +-
 drivers/pci/controller/pcie-brcmstb.c         | 408 +++++++++++++++---
 drivers/usb/core/message.c                    |   3 +
 drivers/usb/core/usb.c                        |   3 +
 include/linux/device.h                        |  10 +-
 include/linux/dma-direct.h                    |  10 +-
 include/linux/dma-mapping.h                   |  46 ++
 kernel/dma/Kconfig                            |  13 +
 14 files changed, 559 insertions(+), 83 deletions(-)

-- 
2.17.1

[PATCH v2 01/14] PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

Have PCIE_BRCMSTB depend on ARCH_BRCMSTB.  Also set the default value to
ARCH_BRCMSTB.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/pci/controller/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 91bfdb784829..c0f3d4d10047 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -244,9 +244,10 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
+	default ARCH_BRCMSTB
 	help
 	  Say Y here to enable PCIe host controller support for
 	  Broadcom STB based SoCs, like the Raspberry Pi 4.
-- 
2.17.1

[PATCH v2 02/14] ata: ahci_brcm: Fix use of BCM7216 reset controller

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

A reset controller "rescal" is shared between the AHCI driver and the PCIe
driver for the BrcmSTB 7216 chip.  The code is modified to allow this
sharing and to deassert() properly.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/ata/ahci_brcm.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 6853dbb4131d..c4ea555573dd 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -428,7 +428,6 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
-	const char *reset_name = NULL;
 	struct brcm_ahci_priv *priv;
 	struct ahci_host_priv *hpriv;
 	struct resource *res;
@@ -452,11 +451,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 
 	/* Reset is optional depending on platform and named differently */
 	if (priv->version == BRCM_SATA_BCM7216)
-		reset_name = "rescal";
+		priv->rcdev = devm_reset_control_get_optional_shared(&pdev->dev,
+								     "rescal");
 	else
-		reset_name = "ahci";
-
-	priv->rcdev = devm_reset_control_get_optional(&pdev->dev, reset_name);
+		priv->rcdev = devm_reset_control_get_optional(&pdev->dev,
+							      "ahci");
 	if (IS_ERR(priv->rcdev))
 		return PTR_ERR(priv->rcdev);
 
@@ -479,10 +478,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 		break;
 	}
 
-	if (priv->version == BRCM_SATA_BCM7216)
-		ret = reset_control_reset(priv->rcdev);
-	else
-		ret = reset_control_deassert(priv->rcdev);
+	ret = reset_control_deassert(priv->rcdev);
 	if (ret)
 		return ret;
 
-- 
2.17.1

[PATCH v2 03/14] dt-bindings: PCI: Add bindings for more Brcmstb chips

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
  7211 (STB version of RPi4).
- add new property 'brcm,scb-sizes'
- add new property 'resets'
- add new property 'reset-names'
- allow 'ranges' and 'dma-ranges' to have more than one item and update
  the example to show this.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 40 +++++++++++++++++--
 1 file changed, 36 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 8680a0f86c5a..66a7df45983d 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -14,7 +14,13 @@ allOf:
 
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
 
   reg:
     maxItems: 1
@@ -34,10 +40,12 @@ properties:
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   dma-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 6
 
   clocks:
     maxItems: 1
@@ -58,8 +66,30 @@ properties:
 
   aspm-no-l0s: true
 
+  resets:
+    description: for "brcm,bcm7216-pcie", must be a valid reset
+      phandle pointing to the RESCAL reset controller provider node.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  reset-names:
+    items:
+      - const: rescal
+
+  brcm,scb-sizes:
+    description: (u32, u32) tuple giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - items:
+          minItems: 2
+          maxItems: 6
+
 required:
   - reg
+  - ranges
   - dma-ranges
   - "#interrupt-cells"
   - interrupts
@@ -93,7 +123,9 @@ examples:
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
+                    brcm,scb-sizes = <0x0 0x80000000 0x0 0x80000000>;
             };
     };
-- 
2.17.1

[PATCH v2 04/14] PCI: brcmstb: Add bcm7278 reigister info

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

Add in compatibility strings and code for three Broadcom STB chips.  Some
of the register locations, shifts, and masks are different for certain
chips, requiring the use of different constants based on of_id.

We would like to add the following at this time to the match list but we
need to wait until the end of this patchset so that everything works.

    { .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
    { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
    { .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
    { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 108 +++++++++++++++++++++++---
 1 file changed, 96 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 73020b4ff090..7c707e483181 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -120,9 +120,8 @@
 #define  PCIE_EXT_SLOT_SHIFT				15
 #define  PCIE_EXT_FUNC_SHIFT				12
 
-#define PCIE_RGR1_SW_INIT_1				0x9210
 #define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1
-#define  PCIE_RGR1_SW_INIT_1_INIT_MASK			0x2
+#define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0
 
 /* PCIe parameters */
 #define BRCM_NUM_PCIE_OUT_WINS		0x4
@@ -152,6 +151,76 @@
 #define SSC_STATUS_SSC_MASK		0x400
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
 
+#define IDX_ADDR(pcie)	\
+	(pcie->reg_offsets[EXT_CFG_INDEX])
+#define DATA_ADDR(pcie)	\
+	(pcie->reg_offsets[EXT_CFG_DATA])
+#define PCIE_RGR1_SW_INIT_1(pcie) \
+	(pcie->reg_offsets[RGR1_SW_INIT_1])
+
+enum {
+	RGR1_SW_INIT_1,
+	EXT_CFG_INDEX,
+	EXT_CFG_DATA,
+};
+
+enum {
+	RGR1_SW_INIT_1_INIT_MASK,
+	RGR1_SW_INIT_1_INIT_SHIFT,
+};
+
+enum pcie_type {
+	GENERIC,
+	BCM7278,
+	BCM2711,
+};
+
+struct pcie_cfg_data {
+	const int *reg_field_info;
+	const int *offsets;
+	const enum pcie_type type;
+};
+
+static const int pcie_reg_field_info[] = {
+	[RGR1_SW_INIT_1_INIT_MASK] = 0x2,
+	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
+};
+
+static const int pcie_reg_field_info_bcm7278[] = {
+	[RGR1_SW_INIT_1_INIT_MASK] = 0x1,
+	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x0,
+};
+
+static const int pcie_offsets[] = {
+	[RGR1_SW_INIT_1] = 0x9210,
+	[EXT_CFG_INDEX]  = 0x9000,
+	[EXT_CFG_DATA]   = 0x9004,
+};
+
+static const struct pcie_cfg_data generic_cfg = {
+	.reg_field_info	= pcie_reg_field_info,
+	.offsets	= pcie_offsets,
+	.type		= GENERIC,
+};
+
+static const int pcie_offset_bcm7278[] = {
+	[RGR1_SW_INIT_1] = 0xc010,
+	[EXT_CFG_INDEX] = 0x9000,
+	[EXT_CFG_DATA] = 0x9004,
+};
+
+static const struct pcie_cfg_data bcm7278_cfg = {
+	.reg_field_info = pcie_reg_field_info_bcm7278,
+	.offsets	= pcie_offset_bcm7278,
+	.type		= BCM7278,
+};
+
+static const struct pcie_cfg_data bcm2711_cfg = {
+	.reg_field_info	= pcie_reg_field_info,
+	.offsets	= pcie_offsets,
+	.type		= BCM2711,
+};
+
 struct brcm_msi {
 	struct device		*dev;
 	void __iomem		*base;
@@ -176,6 +245,9 @@ struct brcm_pcie {
 	int			gen;
 	u64			msi_target_addr;
 	struct brcm_msi		*msi;
+	const int		*reg_offsets;
+	const int		*reg_field_info;
+	enum pcie_type		type;
 };
 
 /*
@@ -602,20 +674,21 @@ static struct pci_ops brcm_pcie_ops = {
 
 static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val)
 {
-	u32 tmp;
+	u32 tmp, mask =  pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
+	u32 shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1);
-	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_INIT_MASK);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1);
+	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	tmp = (tmp & ~mask) | ((val << shift) & mask);
+	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 }
 
 static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val)
 {
 	u32 tmp;
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1);
+	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1);
+	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 }
 
 static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
@@ -924,10 +997,16 @@ static int brcm_pcie_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id brcm_pcie_match[] = {
+	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
+	{},
+};
+
 static int brcm_pcie_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node, *msi_np;
 	struct pci_host_bridge *bridge;
+	const struct pcie_cfg_data *data;
 	struct brcm_pcie *pcie;
 	struct pci_bus *child;
 	struct resource *res;
@@ -937,9 +1016,18 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (!bridge)
 		return -ENOMEM;
 
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data) {
+		pr_err("failed to look up compatible string\n");
+		return -EINVAL;
+	}
+
 	pcie = pci_host_bridge_priv(bridge);
 	pcie->dev = &pdev->dev;
 	pcie->np = np;
+	pcie->reg_offsets = data->offsets;
+	pcie->reg_field_info = data->reg_field_info;
+	pcie->type = data->type;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pcie->base = devm_ioremap_resource(&pdev->dev, res);
@@ -1005,10 +1093,6 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static const struct of_device_id brcm_pcie_match[] = {
-	{ .compatible = "brcm,bcm2711-pcie" },
-	{},
-};
 MODULE_DEVICE_TABLE(of, brcm_pcie_match);
 
 static struct platform_driver brcm_pcie_driver = {
-- 
2.17.1

[PATCH v2 05/14] PCI: brcmstb: Add suspend and resume pm_ops

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

Broadcom Set-top (BrcmSTB) boards typically support S2, S3, and S5 suspend
and resume.  Now the PCIe driver may do so as well.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 49 +++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 7c707e483181..f444751e247c 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -979,6 +979,49 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 	brcm_pcie_bridge_sw_init_set(pcie, 1);
 }
 
+static int brcm_pcie_suspend(struct device *dev)
+{
+	struct brcm_pcie *pcie = dev_get_drvdata(dev);
+	int ret = 0;
+
+	brcm_pcie_turn_off(pcie);
+	clk_disable_unprepare(pcie->clk);
+
+	return ret;
+}
+
+static int brcm_pcie_resume(struct device *dev)
+{
+	struct brcm_pcie *pcie = dev_get_drvdata(dev);
+	void __iomem *base;
+	u32 tmp;
+	int ret;
+
+	base = pcie->base;
+	clk_prepare_enable(pcie->clk);
+
+	/* Take bridge out of reset so we can access the SERDES reg */
+	brcm_pcie_bridge_sw_init_set(pcie, 0);
+
+	/* SERDES_IDDQ = 0 */
+	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	u32p_replace_bits(&tmp, 0,
+			  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
+	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+
+	/* wait for serdes to be stable */
+	udelay(100);
+
+	ret = brcm_pcie_setup(pcie);
+	if (ret)
+		return ret;
+
+	if (pcie->msi)
+		brcm_msi_set_regs(pcie->msi);
+
+	return 0;
+}
+
 static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 {
 	brcm_msi_remove(pcie);
@@ -1095,12 +1138,18 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 
 MODULE_DEVICE_TABLE(of, brcm_pcie_match);
 
+static const struct dev_pm_ops brcm_pcie_pm_ops = {
+	.suspend_noirq = brcm_pcie_suspend,
+	.resume_noirq = brcm_pcie_resume,
+};
+
 static struct platform_driver brcm_pcie_driver = {
 	.probe = brcm_pcie_probe,
 	.remove = brcm_pcie_remove,
 	.driver = {
 		.name = "brcm-pcie",
 		.of_match_table = brcm_pcie_match,
+		.pm = &brcm_pcie_pm_ops,
 	},
 };
 module_platform_driver(brcm_pcie_driver);
-- 
2.17.1

[PATCH v2 06/14] PCI: brcmstb: Add bcm7278 PERST support

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

The PERST bit was moved to a different register in 7278-type STB chips.  In
addition, the polarity of the bit was also changed; for other chips writing
a 1 specified assert; for 7278-type chips, writing a 0 specifies assert.

Signal-wise, PERST is an asserted-low signal.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index f444751e247c..0bcae9eba048 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -81,6 +81,7 @@
 
 #define PCIE_MISC_PCIE_CTRL				0x4064
 #define  PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK	0x1
+#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK		0x4
 
 #define PCIE_MISC_PCIE_STATUS				0x4068
 #define  PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK		0x80
@@ -686,9 +687,17 @@ static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val)
 {
 	u32 tmp;
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
-	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	if (pcie->type == BCM7278) {
+		/* Perst bit has moved and assert value is 0 */
+		tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL);
+		u32p_replace_bits(&tmp,
+				  !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK);
+		writel(tmp, pcie->base +  PCIE_MISC_PCIE_CTRL);
+	} else {
+		tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+		u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
+		writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	}
 }
 
 static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
-- 
2.17.1

[PATCH v2 07/14] PCI: brcmstb: Add control of rescal reset

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

Some STB chips have a special purpose reset controller named RESCAL (reset
calibration).  The PCIe HW can now control RESCAL to start and stop its
operation.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 81 ++++++++++++++++++++++++++-
 1 file changed, 80 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 0bcae9eba048..fa356bc149c3 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -23,6 +23,7 @@
 #include <linux/of_platform.h>
 #include <linux/pci.h>
 #include <linux/printk.h>
+#include <linux/reset.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/string.h>
@@ -152,7 +153,17 @@
 #define SSC_STATUS_SSC_MASK		0x400
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
 
-#define IDX_ADDR(pcie)	\
+/* Rescal registers */
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS			0x3
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK		0x4
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT	0x2
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK		0x2
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT		0x1
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK		0x1
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT		0x0
+
+#define IDX_ADDR(pcie) \
 	(pcie->reg_offsets[EXT_CFG_INDEX])
 #define DATA_ADDR(pcie)	\
 	(pcie->reg_offsets[EXT_CFG_DATA])
@@ -249,6 +260,7 @@ struct brcm_pcie {
 	const int		*reg_offsets;
 	const int		*reg_field_info;
 	enum pcie_type		type;
+	struct reset_control	*rescal;
 };
 
 /*
@@ -964,6 +976,47 @@ static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
 		dev_err(pcie->dev, "failed to enter low-power link state\n");
 }
 
+static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
+{
+	static const u32 shifts[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT,};
+	static const u32 masks[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK,};
+	const int beg = start ? 0 : PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS - 1;
+	const int end = start ? PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS : -1;
+	u32 tmp, combined_mask = 0;
+	u32 val = !!start;
+	void __iomem *base = pcie->base;
+	int i;
+
+	for (i = beg; i != end; start ? i++ : i--) {
+		tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
+		tmp = (tmp & ~masks[i]) | ((val << shifts[i]) & masks[i]);
+		writel(tmp, base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
+		usleep_range(50, 200);
+		combined_mask |= masks[i];
+	}
+
+	tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
+	val = start ? combined_mask : 0;
+
+	return (tmp & combined_mask) == val ? 0 : -EIO;
+}
+
+static inline int brcm_phy_start(struct brcm_pcie *pcie)
+{
+	return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
+}
+
+static inline int brcm_phy_stop(struct brcm_pcie *pcie)
+{
+	return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
+}
+
 static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 {
 	void __iomem *base = pcie->base;
@@ -994,6 +1047,9 @@ static int brcm_pcie_suspend(struct device *dev)
 	int ret = 0;
 
 	brcm_pcie_turn_off(pcie);
+	ret = brcm_phy_stop(pcie);
+	if (ret)
+		dev_err(pcie->dev, "failed to stop phy\n");
 	clk_disable_unprepare(pcie->clk);
 
 	return ret;
@@ -1009,6 +1065,12 @@ static int brcm_pcie_resume(struct device *dev)
 	base = pcie->base;
 	clk_prepare_enable(pcie->clk);
 
+	ret = brcm_phy_start(pcie);
+	if (ret) {
+		dev_err(pcie->dev, "failed to start phy\n");
+		return ret;
+	}
+
 	/* Take bridge out of reset so we can access the SERDES reg */
 	brcm_pcie_bridge_sw_init_set(pcie, 0);
 
@@ -1035,6 +1097,9 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 {
 	brcm_msi_remove(pcie);
 	brcm_pcie_turn_off(pcie);
+	if (brcm_phy_stop(pcie))
+		dev_err(pcie->dev, "failed to stop phy\n");
+	reset_control_assert(pcie->rescal);
 	clk_disable_unprepare(pcie->clk);
 }
 
@@ -1105,6 +1170,20 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "could not enable clock\n");
 		return ret;
 	}
+	pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev,
+							      "rescal");
+	if (IS_ERR(pcie->rescal))
+		return PTR_ERR(pcie->rescal);
+
+	ret = reset_control_deassert(pcie->rescal);
+	if (ret)
+		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
+
+	ret = brcm_phy_start(pcie);
+	if (ret) {
+		dev_err(pcie->dev, "failed to start phy\n");
+		return ret;
+	}
 
 	ret = brcm_pcie_setup(pcie);
 	if (ret)
-- 
2.17.1

[PATCH v2 08/14] of: Include a dev param in of_dma_get_range()

[Jim Quinlan]

Currently there is only one caller of of_dma_get_range().  A struct device
*dev param is needed For implementing multiple dma offsets.  This function
will still work if dev == NULL.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/of/address.c    | 4 +++-
 drivers/of/device.c     | 2 +-
 drivers/of/of_private.h | 8 ++++----
 3 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/of/address.c b/drivers/of/address.c
index 8eea3f6e29a4..96d8cfb14a60 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -920,6 +920,7 @@ EXPORT_SYMBOL(of_io_request_and_map);
 
 /**
  * of_dma_get_range - Get DMA range info
+ * @dev:	device pointer; only needed for a corner case.
  * @np:		device node to get DMA range info
  * @dma_addr:	pointer to store initial DMA address of DMA range
  * @paddr:	pointer to store initial CPU address of DMA range
@@ -935,7 +936,8 @@ EXPORT_SYMBOL(of_io_request_and_map);
  * It returns -ENODEV if "dma-ranges" property was not found
  * for this device in DT.
  */
-int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size)
+int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
+		     u64 *paddr, u64 *size)
 {
 	struct device_node *node = of_node_get(np);
 	const __be32 *ranges = NULL;
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 27203bfd0b22..ef6a741f9f0b 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -95,7 +95,7 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
 	const struct iommu_ops *iommu;
 	u64 mask, end;
 
-	ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
+	ret = of_dma_get_range(dev, np, &dma_addr, &paddr, &size);
 	if (ret < 0) {
 		/*
 		 * For legacy reasons, we have to assume some devices need
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
index edc682249c00..7a83d3a81ab6 100644
--- a/drivers/of/of_private.h
+++ b/drivers/of/of_private.h
@@ -158,11 +158,11 @@ extern int of_bus_n_addr_cells(struct device_node *np);
 extern int of_bus_n_size_cells(struct device_node *np);
 
 #ifdef CONFIG_OF_ADDRESS
-extern int of_dma_get_range(struct device_node *np, u64 *dma_addr,
-			    u64 *paddr, u64 *size);
+extern int of_dma_get_range(struct device *dev, struct device_node *np,
+			    u64 *dma_addr, u64 *paddr, u64 *size);
 #else
-static inline int of_dma_get_range(struct device_node *np, u64 *dma_addr,
-				   u64 *paddr, u64 *size)
+static inline int of_dma_get_range(struct device *dev, struct device_node *np,
+				   u64 *dma_addr, u64 *paddr, u64 *size)
 {
 	return -ENODEV;
 }
-- 
2.17.1

[PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Jim Quinlan]

The new field in struct device 'dma_pfn_offset_map' is used to facilitate
the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
similar to 'dma_pfn_offset' except that the offset chosen depends on the
cpu or dma address involved.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
 drivers/usb/core/message.c  |  3 ++
 drivers/usb/core/usb.c      |  3 ++
 include/linux/device.h      | 10 +++++-
 include/linux/dma-direct.h  | 10 ++++--
 include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
 kernel/dma/Kconfig          | 13 ++++++++
 7 files changed, 144 insertions(+), 6 deletions(-)

diff --git a/drivers/of/address.c b/drivers/of/address.c
index 96d8cfb14a60..a01afffcde7d 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -918,6 +918,47 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
 }
 EXPORT_SYMBOL(of_io_request_and_map);
 
+#ifdef CONFIG_DMA_PFN_OFFSET_MAP
+static int attach_dma_pfn_offset_map(struct device *dev,
+				     struct device_node *node, int num_ranges)
+{
+	struct of_range_parser parser;
+	struct of_range range;
+	size_t r_size = (num_ranges + 1)
+		* sizeof(struct dma_pfn_offset_region);
+	struct dma_pfn_offset_region *r;
+
+	r = devm_kzalloc(dev, r_size, GFP_KERNEL);
+	if (!r)
+		return -ENOMEM;
+	dev->dma_pfn_offset_map = r;
+	of_dma_range_parser_init(&parser, node);
+
+	/*
+	 * Record all info for DMA ranges array.  We could
+	 * just use the of_range struct, but if we did that it
+	 * would require more calculations for phys_to_dma and
+	 * dma_to_phys conversions.
+	 */
+	for_each_of_range(&parser, &range) {
+		r->cpu_beg = range.cpu_addr;
+		r->cpu_end = r->cpu_beg + range.size;
+		r->dma_beg = range.bus_addr;
+		r->dma_end = r->dma_beg + range.size;
+		r->pfn_offset = PFN_DOWN(range.cpu_addr)
+			- PFN_DOWN(range.bus_addr);
+		r++;
+	}
+	return 0;
+}
+#else
+static int attach_dma_pfn_offset_map(struct device *dev,
+				     struct device_node *node, int num_ranges)
+{
+	return 0;
+}
+#endif
+
 /**
  * of_dma_get_range - Get DMA range info
  * @dev:	device pointer; only needed for a corner case.
@@ -947,6 +988,8 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
 	struct of_range_parser parser;
 	struct of_range range;
 	u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
+	bool dma_multi_pfn_offset = false;
+	int num_ranges = 0;
 
 	while (node) {
 		ranges = of_get_property(node, "dma-ranges", &len);
@@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
 		pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
 			 range.bus_addr, range.cpu_addr, range.size);
 
+		num_ranges++;
 		if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) {
-			pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
-			/* Don't error out as we'd break some existing DTs */
-			continue;
+			if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
+				pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
+				pr_warn("Perhaps set DMA_PFN_OFFSET_MAP=y?\n");
+				/*
+				 * Don't error out as we'd break some existing
+				 * DTs that are using configs w/o
+				 * CONFIG_DMA_PFN_OFFSET_MAP set.
+				 */
+				continue;
+			}
+			dma_multi_pfn_offset = true;
 		}
 		dma_offset = range.cpu_addr - range.bus_addr;
 
@@ -991,6 +1043,13 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
 			dma_end = range.bus_addr + range.size;
 	}
 
+	if (dma_multi_pfn_offset) {
+		dma_offset = 0;
+		ret = attach_dma_pfn_offset_map(dev, node, num_ranges);
+		if (ret)
+			return ret;
+	}
+
 	if (dma_start >= dma_end) {
 		ret = -EINVAL;
 		pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 6197938dcc2d..aaa3e58f5eb4 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1960,6 +1960,9 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 		 */
 		intf->dev.dma_mask = dev->dev.dma_mask;
 		intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
+#ifdef CONFIG_DMA_PFN_OFFSET_MAP
+		intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
+#endif
 		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
 		intf->minor = -1;
 		device_initialize(&intf->dev);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index f16c26dc079d..d2ed4d90e56e 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -612,6 +612,9 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	 */
 	dev->dev.dma_mask = bus->sysdev->dma_mask;
 	dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
+#ifdef CONFIG_DMA_PFN_OFFSET_MAP
+	dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
+#endif
 	set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
 	dev->state = USB_STATE_ATTACHED;
 	dev->lpm_disable_count = 1;
diff --git a/include/linux/device.h b/include/linux/device.h
index ac8e37cd716a..67a240ad4fc5 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -493,6 +493,8 @@ struct dev_links_info {
  * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
  *		DMA limit than the device itself supports.
  * @dma_pfn_offset: offset of DMA memory range relatively of RAM
+ * @dma_pfn_offset_map:	Like dma_pfn_offset but used when there are multiple
+ *		pfn offsets for multiple dma-ranges.
  * @dma_parms:	A low level driver may set these to teach IOMMU code about
  * 		segment limitations.
  * @dma_pools:	Dma pools (if dma'ble device).
@@ -578,7 +580,13 @@ struct device {
 					     allocations such descriptors. */
 	u64		bus_dma_limit;	/* upstream dma constraint */
 	unsigned long	dma_pfn_offset;
-
+#ifdef CONFIG_DMA_PFN_OFFSET_MAP
+	const struct dma_pfn_offset_region *dma_pfn_offset_map;
+					/* Like dma_pfn_offset, but for
+					 * the unlikely case of multiple
+					 * offsets. If non-null, dma_pfn_offset
+					 * will be set to 0. */
+#endif
 	struct device_dma_parameters *dma_parms;
 
 	struct list_head	dma_pools;	/* dma pools (if dma'ble) */
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index 24b8684aa21d..03110a57eabc 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -14,15 +14,21 @@ extern unsigned int zone_dma_bits;
 static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	dma_addr_t dev_addr = (dma_addr_t)paddr;
+	/* The compiler should remove the 2nd term if !DMA_PFN_OFFSET_MAP */
+	unsigned long dma_pfn_offset = dev->dma_pfn_offset
+		+ dma_pfn_offset_from_phys_addr(dev, paddr);
 
-	return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
+	return dev_addr - ((dma_addr_t)dma_pfn_offset << PAGE_SHIFT);
 }
 
 static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr)
 {
 	phys_addr_t paddr = (phys_addr_t)dev_addr;
+	/* The compiler should remove the 2nd term if !DMA_PFN_OFFSET_MAP */
+	unsigned long dma_pfn_offset = dev->dma_pfn_offset
+		+ dma_pfn_offset_from_dma_addr(dev, paddr);
 
-	return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
+	return paddr + ((phys_addr_t)dma_pfn_offset << PAGE_SHIFT);
 }
 #endif /* !CONFIG_ARCH_HAS_PHYS_TO_DMA */
 
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 330ad58fbf4d..91940bba2229 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -256,6 +256,52 @@ static inline void dma_direct_sync_sg_for_cpu(struct device *dev,
 size_t dma_direct_max_mapping_size(struct device *dev);
 
 #ifdef CONFIG_HAS_DMA
+#ifdef CONFIG_DMA_PFN_OFFSET_MAP
+struct dma_pfn_offset_region {
+	phys_addr_t	cpu_beg;
+	phys_addr_t	cpu_end;
+	dma_addr_t	dma_beg;
+	dma_addr_t	dma_end;
+	unsigned long	pfn_offset;
+};
+
+static inline unsigned long dma_pfn_offset_from_dma_addr(struct device *dev,
+							 dma_addr_t dma_addr)
+{
+	const struct dma_pfn_offset_region *m = dev->dma_pfn_offset_map;
+
+	if (m)
+		for (; m->cpu_end; m++)
+			if (dma_addr >= m->dma_beg && dma_addr < m->dma_end)
+				return m->pfn_offset;
+	return 0;
+}
+
+static inline unsigned long dma_pfn_offset_from_phys_addr(struct device *dev,
+							  phys_addr_t paddr)
+{
+	const struct dma_pfn_offset_region *m = dev->dma_pfn_offset_map;
+
+	if (m)
+		for (; m->cpu_end; m++)
+			if (paddr >= m->cpu_beg && paddr < m->cpu_end)
+				return m->pfn_offset;
+	return 0;
+}
+#else  /* CONFIG_DMA_PFN_OFFSET_MAP */
+static inline unsigned long dma_pfn_offset_from_dma_addr(struct device *dev,
+							 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline unsigned long dma_pfn_offset_from_phys_addr(struct device *dev,
+							  phys_addr_t paddr)
+{
+	return 0;
+}
+#endif /* CONFIG_DMA_PFN_OFFSET_MAP */
+
 #include <asm/dma-mapping.h>
 
 static inline const struct dma_map_ops *get_dma_ops(struct device *dev)
diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
index 4c103a24e380..ceb7e5e8f501 100644
--- a/kernel/dma/Kconfig
+++ b/kernel/dma/Kconfig
@@ -195,3 +195,16 @@ config DMA_API_DEBUG_SG
 	  is technically out-of-spec.
 
 	  If unsure, say N.
+
+config DMA_PFN_OFFSET_MAP
+	bool "Uses a DMA range map to calculate PFN offset"
+	depends on PCIE_BRCMSTB
+	default n
+	help
+	  Some devices have a dma-range that gets converted to
+	  a dev->dma_pfn_offset value.  This option is for the
+	  atypical case of there being multiple dma-ranges requiring
+	  multiple pfn offsets, which are selected from when
+	  converting to phys to dma and vice versa.
+
+	  If unsure, say N.
-- 
2.17.1

[PATCH v2 10/14] arm: dma-mapping: Invoke dma offset func if needed

[Jim Quinlan]

Just like dma_pfn_offset, another offset is added to the dma/phys
translation if there happen to be multiple regions that have different
mapping offsets.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 arch/arm/include/asm/dma-mapping.h | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index bdd80ddbca34..811389b4fb29 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -35,8 +35,12 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 #ifndef __arch_pfn_to_dma
 static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
 {
-	if (dev)
+	if (dev) {
+		/* This should compile out if !CONFIG_DMA_PFN_OFFSET_MAP */
+		pfn -= dma_pfn_offset_from_phys_addr(dev, PFN_PHYS(pfn));
+
 		pfn -= dev->dma_pfn_offset;
+	}
 	return (dma_addr_t)__pfn_to_bus(pfn);
 }
 
@@ -44,9 +48,12 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
 {
 	unsigned long pfn = __bus_to_pfn(addr);
 
-	if (dev)
-		pfn += dev->dma_pfn_offset;
+	if (dev) {
+		/* This should compile out if !CONFIG_DMA_PFN_OFFSET_MAP */
+		pfn += dma_pfn_offset_from_dma_addr(dev, addr);
 
+		pfn += dev->dma_pfn_offset;
+	}
 	return pfn;
 }
 
-- 
2.17.1

[PATCH v2 11/14] PCI: brcmstb: Set internal memory viewport sizes

[Jim Quinlan]

BrcmSTB PCIe controllers are intimately connected to the memory
controller(s) on the SOC.  There is a "viewport" for each memory controller
that allows inbound accesses to CPU memory.  Each viewport's size must be
set to a power of two, and that size must be equal to or larger than the
amount of memory each controller supports.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 67 ++++++++++++++++++++-------
 1 file changed, 49 insertions(+), 18 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index fa356bc149c3..338e9ed44230 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -55,6 +55,8 @@
 #define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK	0x300000
 #define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128		0x0
 #define  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK		0xf8000000
+#define  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK		0x07c00000
+#define  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK		0x0000001f
 
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO		0x400c
 #define PCIE_MEM_WIN0_LO(win)	\
@@ -152,6 +154,7 @@
 #define SSC_STATUS_OFFSET		0x1
 #define SSC_STATUS_SSC_MASK		0x400
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
+#define PCIE_BRCM_MAX_MEMC		3
 
 /* Rescal registers */
 #define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
@@ -261,6 +264,8 @@ struct brcm_pcie {
 	const int		*reg_field_info;
 	enum pcie_type		type;
 	struct reset_control	*rescal;
+	int			num_memc;
+	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 };
 
 /*
@@ -717,22 +722,40 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
 							u64 *rc_bar2_offset)
 {
 	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
-	struct device *dev = pcie->dev;
 	struct resource_entry *entry;
+	struct device *dev = pcie->dev;
+	u64 lowest_pcie_addr = ~(u64)0;
+	int ret, i = 0;
+	u64 size = 0;
 
-	entry = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM);
-	if (!entry)
-		return -ENODEV;
+	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
+		u64 pcie_beg = entry->res->start - entry->offset;
 
+		size += entry->res->end - entry->res->start + 1;
+		if (pcie_beg < lowest_pcie_addr)
+			lowest_pcie_addr = pcie_beg;
+	}
 
-	/*
-	 * The controller expects the inbound window offset to be calculated as
-	 * the difference between PCIe's address space and CPU's. The offset
-	 * provided by the firmware is calculated the opposite way, so we
-	 * negate it.
-	 */
-	*rc_bar2_offset = -entry->offset;
-	*rc_bar2_size = 1ULL << fls64(entry->res->end - entry->res->start);
+	ret = of_property_read_variable_u64_array(
+		pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
+		PCIE_BRCM_MAX_MEMC);
+
+	if (ret <= 0) {
+		/* Make an educated guess */
+		pcie->num_memc = 1;
+		pcie->memc_size[0] = 1 << fls64(size - 1);
+	} else {
+		pcie->num_memc = ret;
+	}
+
+	/* Each memc is viewed through a "port" that is a power of 2 */
+	for (i = 0, size = 0; i < pcie->num_memc; i++)
+		size += pcie->memc_size[i];
+
+	/* System memory starts at this address in PCIe-space */
+	*rc_bar2_offset = lowest_pcie_addr;
+	/* The sum of all memc views must also be a power of 2 */
+	*rc_bar2_size = 1ULL << fls64(size - 1);
 
 	/*
 	 * We validate the inbound memory view even though we should trust
@@ -784,12 +807,11 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	void __iomem *base = pcie->base;
 	struct device *dev = pcie->dev;
 	struct resource_entry *entry;
-	unsigned int scb_size_val;
 	bool ssc_good = false;
 	struct resource *res;
 	int num_out_wins = 0;
 	u16 nlw, cls, lnksta;
-	int i, ret;
+	int i, ret, memc;
 	u32 tmp, aspm_support;
 
 	/* Reset the bridge */
@@ -825,11 +847,20 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	writel(upper_32_bits(rc_bar2_offset),
 	       base + PCIE_MISC_RC_BAR2_CONFIG_HI);
 
-	scb_size_val = rc_bar2_size ?
-		       ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */
 	tmp = readl(base + PCIE_MISC_MISC_CTRL);
-	u32p_replace_bits(&tmp, scb_size_val,
-			  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK);
+	for (memc = 0; memc < pcie->num_memc; memc++) {
+		u32 scb_size_val = ilog2(pcie->memc_size[memc]) - 15;
+
+		if (memc == 0)
+			u32p_replace_bits(&tmp, scb_size_val,
+					  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK);
+		else if (memc == 1)
+			u32p_replace_bits(&tmp, scb_size_val,
+					  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK);
+		else if (memc == 2)
+			u32p_replace_bits(&tmp, scb_size_val,
+					  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK);
+	}
 	writel(tmp, base + PCIE_MISC_MISC_CTRL);
 
 	/*
-- 
2.17.1

[PATCH v2 12/14] PCI: brcmstb: Accommodate MSI for older chips

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

Older BrcmSTB chips do not have a separate register for MSI interrupts; the
MSIs are in a register that also contains unrelated interrupts.  In
addition, the interrupts lie in bits [31..24] for these legacy chips.  This
commit provides common code for both legacy and non-legacy MSI interrupt
registers.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 72 +++++++++++++++++++--------
 1 file changed, 52 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 338e9ed44230..9930419e3ac2 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -80,7 +80,8 @@
 #define PCIE_MISC_MSI_BAR_CONFIG_HI			0x4048
 
 #define PCIE_MISC_MSI_DATA_CONFIG			0x404c
-#define  PCIE_MISC_MSI_DATA_CONFIG_VAL			0xffe06540
+#define  PCIE_MISC_MSI_DATA_CONFIG_VAL_32		0xffe06540
+#define  PCIE_MISC_MSI_DATA_CONFIG_VAL_8		0xfff86540
 
 #define PCIE_MISC_PCIE_CTRL				0x4064
 #define  PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK	0x1
@@ -92,6 +93,9 @@
 #define  PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK	0x10
 #define  PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK	0x40
 
+#define PCIE_MISC_REVISION				0x406c
+#define  BRCM_PCIE_HW_REV_33				0x0303
+
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT		0x4070
 #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
 #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK	0xfff0
@@ -112,10 +116,14 @@
 #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK	0x2
 #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000
 
-#define PCIE_MSI_INTR2_STATUS				0x4500
-#define PCIE_MSI_INTR2_CLR				0x4508
-#define PCIE_MSI_INTR2_MASK_SET				0x4510
-#define PCIE_MSI_INTR2_MASK_CLR				0x4514
+
+#define PCIE_INTR2_CPU_BASE		0x4300
+#define PCIE_MSI_INTR2_BASE		0x4500
+/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
+#define  MSI_INT_STATUS			0x0
+#define  MSI_INT_CLR			0x8
+#define  MSI_INT_MASK_SET		0x10
+#define  MSI_INT_MASK_CLR		0x14
 
 #define PCIE_EXT_CFG_DATA				0x8000
 
@@ -130,6 +138,8 @@
 /* PCIe parameters */
 #define BRCM_NUM_PCIE_OUT_WINS		0x4
 #define BRCM_INT_PCI_MSI_NR		32
+#define BRCM_INT_PCI_MSI_LEGACY_NR	8
+#define BRCM_INT_PCI_MSI_SHIFT		0
 
 /* MSI target adresses */
 #define BRCM_MSI_TARGET_ADDR_LT_4GB	0x0fffffffcULL
@@ -247,6 +257,12 @@ struct brcm_msi {
 	int			irq;
 	/* used indicates which MSI interrupts have been alloc'd */
 	unsigned long		used;
+	bool			legacy;
+	/* Some chips have MSIs in bits [31..24] of a shared register. */
+	int			legacy_shift;
+	int			nr; /* No. of MSI available, depends on chip */
+	/* This is the base pointer for interrupt status/set/clr regs */
+	void __iomem		*intr_base;
 };
 
 /* Internal PCIe Host Controller Information.*/
@@ -266,6 +282,7 @@ struct brcm_pcie {
 	struct reset_control	*rescal;
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
+	u32			hw_rev;
 };
 
 /*
@@ -456,8 +473,10 @@ static void brcm_pcie_msi_isr(struct irq_desc *desc)
 	msi = irq_desc_get_handler_data(desc);
 	dev = msi->dev;
 
-	status = readl(msi->base + PCIE_MSI_INTR2_STATUS);
-	for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) {
+	status = readl(msi->intr_base + MSI_INT_STATUS);
+	status >>= msi->legacy_shift;
+
+	for_each_set_bit(bit, &status, msi->nr) {
 		virq = irq_find_mapping(msi->inner_domain, bit);
 		if (virq)
 			generic_handle_irq(virq);
@@ -474,7 +493,7 @@ static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 
 	msg->address_lo = lower_32_bits(msi->target_addr);
 	msg->address_hi = upper_32_bits(msi->target_addr);
-	msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL) | data->hwirq;
+	msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL_32) | data->hwirq;
 }
 
 static int brcm_msi_set_affinity(struct irq_data *irq_data,
@@ -486,8 +505,9 @@ static int brcm_msi_set_affinity(struct irq_data *irq_data,
 static void brcm_msi_ack_irq(struct irq_data *data)
 {
 	struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
+	const int shift_amt = data->hwirq + msi->legacy_shift;
 
-	writel(1 << data->hwirq, msi->base + PCIE_MSI_INTR2_CLR);
+	writel(1 << shift_amt, msi->intr_base + MSI_INT_CLR);
 }
 
 
@@ -503,7 +523,7 @@ static int brcm_msi_alloc(struct brcm_msi *msi)
 	int hwirq;
 
 	mutex_lock(&msi->lock);
-	hwirq = bitmap_find_free_region(&msi->used, BRCM_INT_PCI_MSI_NR, 0);
+	hwirq = bitmap_find_free_region(&msi->used, msi->nr, 0);
 	mutex_unlock(&msi->lock);
 
 	return hwirq;
@@ -552,7 +572,7 @@ static int brcm_allocate_domains(struct brcm_msi *msi)
 	struct fwnode_handle *fwnode = of_node_to_fwnode(msi->np);
 	struct device *dev = msi->dev;
 
-	msi->inner_domain = irq_domain_add_linear(NULL, BRCM_INT_PCI_MSI_NR,
+	msi->inner_domain = irq_domain_add_linear(NULL, msi->nr,
 						  &msi_domain_ops, msi);
 	if (!msi->inner_domain) {
 		dev_err(dev, "failed to create IRQ domain\n");
@@ -590,7 +610,10 @@ static void brcm_msi_remove(struct brcm_pcie *pcie)
 
 static void brcm_msi_set_regs(struct brcm_msi *msi)
 {
-	writel(0xffffffff, msi->base + PCIE_MSI_INTR2_MASK_CLR);
+	u32 val = __GENMASK(31, msi->legacy_shift);
+
+	writel(val, msi->intr_base + MSI_INT_MASK_CLR);
+	writel(val, msi->intr_base + MSI_INT_CLR);
 
 	/*
 	 * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI
@@ -601,8 +624,10 @@ static void brcm_msi_set_regs(struct brcm_msi *msi)
 	writel(upper_32_bits(msi->target_addr),
 	       msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI);
 
-	writel(PCIE_MISC_MSI_DATA_CONFIG_VAL,
-	       msi->base + PCIE_MISC_MSI_DATA_CONFIG);
+	val = msi->legacy ? PCIE_MISC_MSI_DATA_CONFIG_VAL_8 :
+		PCIE_MISC_MSI_DATA_CONFIG_VAL_32;
+
+	writel(val, msi->base + PCIE_MISC_MSI_DATA_CONFIG);
 }
 
 static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
@@ -627,6 +652,17 @@ static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
 	msi->np = pcie->np;
 	msi->target_addr = pcie->msi_target_addr;
 	msi->irq = irq;
+	msi->legacy = pcie->hw_rev < BRCM_PCIE_HW_REV_33;
+
+	if (msi->legacy) {
+		msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
+		msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
+		msi->legacy_shift = 24;
+	} else {
+		msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE;
+		msi->nr = BRCM_INT_PCI_MSI_NR;
+		msi->legacy_shift = 0;
+	}
 
 	ret = brcm_allocate_domains(msi);
 	if (ret)
@@ -885,12 +921,6 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK;
 	writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO);
 
-	/* Mask all interrupts since we are not handling any yet */
-	writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_MASK_SET);
-
-	/* clear any interrupts we find on boot */
-	writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_CLR);
-
 	if (pcie->gen)
 		brcm_pcie_set_gen(pcie, pcie->gen);
 
@@ -1220,6 +1250,8 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto fail;
 
+	pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
+
 	msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
 	if (pci_msi_enabled() && msi_np == pcie->np) {
 		ret = brcm_pcie_enable_msi(pcie);
-- 
2.17.1

[PATCH v2 13/14] PCI: brcmstb: Set bus max burst size by chip type

[Jim Quinlan]

From: Jim Quinlan <jquinlan@broadcom.com>

The proper value of the parameter SCB_MAX_BURST_SIZE varies per chip.  The
2711 family requires 128B whereas other devices can employ 512.  The
assignment is complicated by the fact that the values for this two-bit
field have different meanings;

  Value   Type_Generic    Type_7278

     00       Reserved         128B
     01           128B         256B
     10           256B         512B
     11           512B     Reserved

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 9930419e3ac2..131cf0a51398 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -53,7 +53,7 @@
 #define  PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK		0x1000
 #define  PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK	0x2000
 #define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK	0x300000
-#define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128		0x0
+
 #define  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK		0xf8000000
 #define  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK		0x07c00000
 #define  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK		0x0000001f
@@ -848,7 +848,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	int num_out_wins = 0;
 	u16 nlw, cls, lnksta;
 	int i, ret, memc;
-	u32 tmp, aspm_support;
+	u32 tmp, burst, aspm_support;
 
 	/* Reset the bridge */
 	brcm_pcie_bridge_sw_init_set(pcie, 1);
@@ -864,10 +864,22 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	/* Wait for SerDes to be stable */
 	usleep_range(100, 200);
 
+	/*
+	 * SCB_MAX_BURST_SIZE is a two bit field.  For GENERIC chips it
+	 * is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it
+	 * is encoded as 0=Rsvd, 1=128, 2=256, 3=512.
+	 */
+	if (pcie->type == BCM2711)
+		burst = 0x0; /* 128B */
+	else if (pcie->type == BCM7278)
+		burst = 0x3; /* 512 bytes */
+	else
+		burst = 0x2; /* 512 bytes */
+
 	/* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
 	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK);
 	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK);
-	u32p_replace_bits(&tmp, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128,
+	u32p_replace_bits(&tmp, burst,
 			  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK);
 	writel(tmp, base + PCIE_MISC_MISC_CTRL);
 
-- 
2.17.1

[PATCH v2 14/14] PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list

[Jim Quinlan]

Now that the support is in place with previous commits, we add several
chips that use the BrcmSTB driver.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 131cf0a51398..22dbecb5403c 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1189,6 +1189,10 @@ static int brcm_pcie_remove(struct platform_device *pdev)
 
 static const struct of_device_id brcm_pcie_match[] = {
 	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
+	{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
+	{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
+	{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
+	{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
 	{},
 };
 
-- 
2.17.1

Re: [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Andy Shevchenko]

On Tue, May 26, 2020 at 03:12:48PM -0400, Jim Quinlan wrote:
> The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
> similar to 'dma_pfn_offset' except that the offset chosen depends on the
> cpu or dma address involved.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> ---
>  drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
>  drivers/usb/core/message.c  |  3 ++
>  drivers/usb/core/usb.c      |  3 ++
>  include/linux/device.h      | 10 +++++-
>  include/linux/dma-direct.h  | 10 ++++--
>  include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
>  kernel/dma/Kconfig          | 13 ++++++++
>  7 files changed, 144 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 96d8cfb14a60..a01afffcde7d 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -918,6 +918,47 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
>  }
>  EXPORT_SYMBOL(of_io_request_and_map);
>  
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +static int attach_dma_pfn_offset_map(struct device *dev,
> +				     struct device_node *node, int num_ranges)
> +{
> +	struct of_range_parser parser;
> +	struct of_range range;
> +	size_t r_size = (num_ranges + 1)
> +		* sizeof(struct dma_pfn_offset_region);
> +	struct dma_pfn_offset_region *r;
> +

> +	r = devm_kzalloc(dev, r_size, GFP_KERNEL);

devm_?!

Looking at r_size it should be rather kcalloc().

> +	if (!r)
> +		return -ENOMEM;
> +	dev->dma_pfn_offset_map = r;
> +	of_dma_range_parser_init(&parser, node);
> +
> +	/*
> +	 * Record all info for DMA ranges array.  We could
> +	 * just use the of_range struct, but if we did that it
> +	 * would require more calculations for phys_to_dma and
> +	 * dma_to_phys conversions.
> +	 */
> +	for_each_of_range(&parser, &range) {
> +		r->cpu_beg = range.cpu_addr;
> +		r->cpu_end = r->cpu_beg + range.size;
> +		r->dma_beg = range.bus_addr;
> +		r->dma_end = r->dma_beg + range.size;
> +		r->pfn_offset = PFN_DOWN(range.cpu_addr)
> +			- PFN_DOWN(range.bus_addr);
> +		r++;
> +	}
> +	return 0;
> +}
> +#else
> +static int attach_dma_pfn_offset_map(struct device *dev,
> +				     struct device_node *node, int num_ranges)
> +{
> +	return 0;
> +}
> +#endif
> +
>  /**
>   * of_dma_get_range - Get DMA range info
>   * @dev:	device pointer; only needed for a corner case.
> @@ -947,6 +988,8 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
>  	struct of_range_parser parser;
>  	struct of_range range;
>  	u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> +	bool dma_multi_pfn_offset = false;
> +	int num_ranges = 0;
>  
>  	while (node) {
>  		ranges = of_get_property(node, "dma-ranges", &len);
> @@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
>  		pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
>  			 range.bus_addr, range.cpu_addr, range.size);
>  
> +		num_ranges++;
>  		if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) {
> -			pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
> -			/* Don't error out as we'd break some existing DTs */
> -			continue;
> +			if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
> +				pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
> +				pr_warn("Perhaps set DMA_PFN_OFFSET_MAP=y?\n");
> +				/*
> +				 * Don't error out as we'd break some existing
> +				 * DTs that are using configs w/o
> +				 * CONFIG_DMA_PFN_OFFSET_MAP set.
> +				 */
> +				continue;
> +			}
> +			dma_multi_pfn_offset = true;
>  		}
>  		dma_offset = range.cpu_addr - range.bus_addr;
>  
> @@ -991,6 +1043,13 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
>  			dma_end = range.bus_addr + range.size;
>  	}
>  
> +	if (dma_multi_pfn_offset) {
> +		dma_offset = 0;
> +		ret = attach_dma_pfn_offset_map(dev, node, num_ranges);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	if (dma_start >= dma_end) {
>  		ret = -EINVAL;
>  		pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
> diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> index 6197938dcc2d..aaa3e58f5eb4 100644
> --- a/drivers/usb/core/message.c
> +++ b/drivers/usb/core/message.c
> @@ -1960,6 +1960,9 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
>  		 */
>  		intf->dev.dma_mask = dev->dev.dma_mask;
>  		intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +		intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
> +#endif
>  		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
>  		intf->minor = -1;
>  		device_initialize(&intf->dev);
> diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> index f16c26dc079d..d2ed4d90e56e 100644
> --- a/drivers/usb/core/usb.c
> +++ b/drivers/usb/core/usb.c
> @@ -612,6 +612,9 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
>  	 */
>  	dev->dev.dma_mask = bus->sysdev->dma_mask;
>  	dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +	dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
> +#endif
>  	set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
>  	dev->state = USB_STATE_ATTACHED;
>  	dev->lpm_disable_count = 1;
> diff --git a/include/linux/device.h b/include/linux/device.h
> index ac8e37cd716a..67a240ad4fc5 100644
> --- a/include/linux/device.h
> +++ b/include/linux/device.h
> @@ -493,6 +493,8 @@ struct dev_links_info {
>   * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
>   *		DMA limit than the device itself supports.
>   * @dma_pfn_offset: offset of DMA memory range relatively of RAM
> + * @dma_pfn_offset_map:	Like dma_pfn_offset but used when there are multiple
> + *		pfn offsets for multiple dma-ranges.
>   * @dma_parms:	A low level driver may set these to teach IOMMU code about
>   * 		segment limitations.
>   * @dma_pools:	Dma pools (if dma'ble device).
> @@ -578,7 +580,13 @@ struct device {
>  					     allocations such descriptors. */
>  	u64		bus_dma_limit;	/* upstream dma constraint */
>  	unsigned long	dma_pfn_offset;
> -
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +	const struct dma_pfn_offset_region *dma_pfn_offset_map;

> +					/* Like dma_pfn_offset, but for
> +					 * the unlikely case of multiple
> +					 * offsets. If non-null, dma_pfn_offset
> +					 * will be set to 0. */

A bit harder to read comment indented too much and located after the declared variable.

> +#endif
>  	struct device_dma_parameters *dma_parms;
>  
>  	struct list_head	dma_pools;	/* dma pools (if dma'ble) */
> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
> index 24b8684aa21d..03110a57eabc 100644
> --- a/include/linux/dma-direct.h
> +++ b/include/linux/dma-direct.h
> @@ -14,15 +14,21 @@ extern unsigned int zone_dma_bits;
>  static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
>  {
>  	dma_addr_t dev_addr = (dma_addr_t)paddr;
> +	/* The compiler should remove the 2nd term if !DMA_PFN_OFFSET_MAP */
> +	unsigned long dma_pfn_offset = dev->dma_pfn_offset
> +		+ dma_pfn_offset_from_phys_addr(dev, paddr);
>  
> -	return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
> +	return dev_addr - ((dma_addr_t)dma_pfn_offset << PAGE_SHIFT);
>  }
>  
>  static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr)
>  {
>  	phys_addr_t paddr = (phys_addr_t)dev_addr;
> +	/* The compiler should remove the 2nd term if !DMA_PFN_OFFSET_MAP */
> +	unsigned long dma_pfn_offset = dev->dma_pfn_offset
> +		+ dma_pfn_offset_from_dma_addr(dev, paddr);
>  
> -	return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
> +	return paddr + ((phys_addr_t)dma_pfn_offset << PAGE_SHIFT);
>  }
>  #endif /* !CONFIG_ARCH_HAS_PHYS_TO_DMA */
>  
> diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
> index 330ad58fbf4d..91940bba2229 100644
> --- a/include/linux/dma-mapping.h
> +++ b/include/linux/dma-mapping.h
> @@ -256,6 +256,52 @@ static inline void dma_direct_sync_sg_for_cpu(struct device *dev,
>  size_t dma_direct_max_mapping_size(struct device *dev);
>  
>  #ifdef CONFIG_HAS_DMA
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +struct dma_pfn_offset_region {

> +	phys_addr_t	cpu_beg;
> +	phys_addr_t	cpu_end;
> +	dma_addr_t	dma_beg;
> +	dma_addr_t	dma_end;

Perhaps
	s,beg,start,
in above names

> +	unsigned long	pfn_offset;
> +};
> +
> +static inline unsigned long dma_pfn_offset_from_dma_addr(struct device *dev,
> +							 dma_addr_t dma_addr)
> +{
> +	const struct dma_pfn_offset_region *m = dev->dma_pfn_offset_map;

> +	if (m)
> +		for (; m->cpu_end; m++)

Why not simple

	while (m) {
		...
	}

?


> +			if (dma_addr >= m->dma_beg && dma_addr < m->dma_end)
> +				return m->pfn_offset;
> +	return 0;
> +}
> +
> +static inline unsigned long dma_pfn_offset_from_phys_addr(struct device *dev,
> +							  phys_addr_t paddr)
> +{
> +	const struct dma_pfn_offset_region *m = dev->dma_pfn_offset_map;
> +

> +	if (m)
> +		for (; m->cpu_end; m++)

Ditto.

> +			if (paddr >= m->cpu_beg && paddr < m->cpu_end)
> +				return m->pfn_offset;
> +	return 0;
> +}
> +#else  /* CONFIG_DMA_PFN_OFFSET_MAP */
> +static inline unsigned long dma_pfn_offset_from_dma_addr(struct device *dev,
> +							 dma_addr_t dma_addr)
> +{
> +	return 0;
> +}
> +
> +static inline unsigned long dma_pfn_offset_from_phys_addr(struct device *dev,
> +							  phys_addr_t paddr)
> +{
> +	return 0;
> +}
> +#endif /* CONFIG_DMA_PFN_OFFSET_MAP */
> +
>  #include <asm/dma-mapping.h>
>  
>  static inline const struct dma_map_ops *get_dma_ops(struct device *dev)
> diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
> index 4c103a24e380..ceb7e5e8f501 100644
> --- a/kernel/dma/Kconfig
> +++ b/kernel/dma/Kconfig
> @@ -195,3 +195,16 @@ config DMA_API_DEBUG_SG
>  	  is technically out-of-spec.
>  
>  	  If unsure, say N.
> +
> +config DMA_PFN_OFFSET_MAP
> +	bool "Uses a DMA range map to calculate PFN offset"
> +	depends on PCIE_BRCMSTB

> +	default n

Redundant.

> +	help
> +	  Some devices have a dma-range that gets converted to
> +	  a dev->dma_pfn_offset value.  This option is for the
> +	  atypical case of there being multiple dma-ranges requiring
> +	  multiple pfn offsets, which are selected from when
> +	  converting to phys to dma and vice versa.
> +
> +	  If unsure, say N.
> -- 
> 2.17.1
> 

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Jim Quinlan]

Hello Andy,

On Tue, May 26, 2020 at 4:54 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Tue, May 26, 2020 at 03:12:48PM -0400, Jim Quinlan wrote:
> > The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> > the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
> > similar to 'dma_pfn_offset' except that the offset chosen depends on the
> > cpu or dma address involved.
> >
> > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > ---
> >  drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
> >  drivers/usb/core/message.c  |  3 ++
> >  drivers/usb/core/usb.c      |  3 ++
> >  include/linux/device.h      | 10 +++++-
> >  include/linux/dma-direct.h  | 10 ++++--
> >  include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
> >  kernel/dma/Kconfig          | 13 ++++++++
> >  7 files changed, 144 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/of/address.c b/drivers/of/address.c
> > index 96d8cfb14a60..a01afffcde7d 100644
> > --- a/drivers/of/address.c
> > +++ b/drivers/of/address.c
> > @@ -918,6 +918,47 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
> >  }
> >  EXPORT_SYMBOL(of_io_request_and_map);
> >
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +static int attach_dma_pfn_offset_map(struct device *dev,
> > +                                  struct device_node *node, int num_ranges)
> > +{
> > +     struct of_range_parser parser;
> > +     struct of_range range;
> > +     size_t r_size = (num_ranges + 1)
> > +             * sizeof(struct dma_pfn_offset_region);
> > +     struct dma_pfn_offset_region *r;
> > +
>
> > +     r = devm_kzalloc(dev, r_size, GFP_KERNEL);
>
> devm_?!

Yes, otherwise if the device gets unbound/bound repeatedly then there
would be a memory leak.

>
>
> Looking at r_size it should be rather kcalloc().

Yep.
>
>
> > +     if (!r)
> > +             return -ENOMEM;
> > +     dev->dma_pfn_offset_map = r;
> > +     of_dma_range_parser_init(&parser, node);
> > +
> > +     /*
> > +      * Record all info for DMA ranges array.  We could
> > +      * just use the of_range struct, but if we did that it
> > +      * would require more calculations for phys_to_dma and
> > +      * dma_to_phys conversions.
> > +      */
> > +     for_each_of_range(&parser, &range) {
> > +             r->cpu_beg = range.cpu_addr;
> > +             r->cpu_end = r->cpu_beg + range.size;
> > +             r->dma_beg = range.bus_addr;
> > +             r->dma_end = r->dma_beg + range.size;
> > +             r->pfn_offset = PFN_DOWN(range.cpu_addr)
> > +                     - PFN_DOWN(range.bus_addr);
> > +             r++;
> > +     }
> > +     return 0;
> > +}
> > +#else
> > +static int attach_dma_pfn_offset_map(struct device *dev,
> > +                                  struct device_node *node, int num_ranges)
> > +{
> > +     return 0;
> > +}
> > +#endif
> > +
> >  /**
> >   * of_dma_get_range - Get DMA range info
> >   * @dev:     device pointer; only needed for a corner case.
> > @@ -947,6 +988,8 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
> >       struct of_range_parser parser;
> >       struct of_range range;
> >       u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> > +     bool dma_multi_pfn_offset = false;
> > +     int num_ranges = 0;
> >
> >       while (node) {
> >               ranges = of_get_property(node, "dma-ranges", &len);
> > @@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
> >               pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> >                        range.bus_addr, range.cpu_addr, range.size);
> >
> > +             num_ranges++;
> >               if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) {
> > -                     pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
> > -                     /* Don't error out as we'd break some existing DTs */
> > -                     continue;
> > +                     if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
> > +                             pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
> > +                             pr_warn("Perhaps set DMA_PFN_OFFSET_MAP=y?\n");
> > +                             /*
> > +                              * Don't error out as we'd break some existing
> > +                              * DTs that are using configs w/o
> > +                              * CONFIG_DMA_PFN_OFFSET_MAP set.
> > +                              */
> > +                             continue;
> > +                     }
> > +                     dma_multi_pfn_offset = true;
> >               }
> >               dma_offset = range.cpu_addr - range.bus_addr;
> >
> > @@ -991,6 +1043,13 @@ int of_dma_get_range(struct device *dev, struct device_node *np, u64 *dma_addr,
> >                       dma_end = range.bus_addr + range.size;
> >       }
> >
> > +     if (dma_multi_pfn_offset) {
> > +             dma_offset = 0;
> > +             ret = attach_dma_pfn_offset_map(dev, node, num_ranges);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +
> >       if (dma_start >= dma_end) {
> >               ret = -EINVAL;
> >               pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
> > diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> > index 6197938dcc2d..aaa3e58f5eb4 100644
> > --- a/drivers/usb/core/message.c
> > +++ b/drivers/usb/core/message.c
> > @@ -1960,6 +1960,9 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
> >                */
> >               intf->dev.dma_mask = dev->dev.dma_mask;
> >               intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +             intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
> > +#endif
> >               INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
> >               intf->minor = -1;
> >               device_initialize(&intf->dev);
> > diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> > index f16c26dc079d..d2ed4d90e56e 100644
> > --- a/drivers/usb/core/usb.c
> > +++ b/drivers/usb/core/usb.c
> > @@ -612,6 +612,9 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
> >        */
> >       dev->dev.dma_mask = bus->sysdev->dma_mask;
> >       dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +     dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
> > +#endif
> >       set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
> >       dev->state = USB_STATE_ATTACHED;
> >       dev->lpm_disable_count = 1;
> > diff --git a/include/linux/device.h b/include/linux/device.h
> > index ac8e37cd716a..67a240ad4fc5 100644
> > --- a/include/linux/device.h
> > +++ b/include/linux/device.h
> > @@ -493,6 +493,8 @@ struct dev_links_info {
> >   * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
> >   *           DMA limit than the device itself supports.
> >   * @dma_pfn_offset: offset of DMA memory range relatively of RAM
> > + * @dma_pfn_offset_map:      Like dma_pfn_offset but used when there are multiple
> > + *           pfn offsets for multiple dma-ranges.
> >   * @dma_parms:       A low level driver may set these to teach IOMMU code about
> >   *           segment limitations.
> >   * @dma_pools:       Dma pools (if dma'ble device).
> > @@ -578,7 +580,13 @@ struct device {
> >                                            allocations such descriptors. */
> >       u64             bus_dma_limit;  /* upstream dma constraint */
> >       unsigned long   dma_pfn_offset;
> > -
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +     const struct dma_pfn_offset_region *dma_pfn_offset_map;
>
> > +                                     /* Like dma_pfn_offset, but for
> > +                                      * the unlikely case of multiple
> > +                                      * offsets. If non-null, dma_pfn_offset
> > +                                      * will be set to 0. */
>
> A bit harder to read comment indented too much and located after the declared variable.

Okay, will change. I was trying to keep the comment style of the other
variables.

> > +#endif
> >       struct device_dma_parameters *dma_parms;
> >
> >       struct list_head        dma_pools;      /* dma pools (if dma'ble) */
> > diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
> > index 24b8684aa21d..03110a57eabc 100644
> > --- a/include/linux/dma-direct.h
> > +++ b/include/linux/dma-direct.h
> > @@ -14,15 +14,21 @@ extern unsigned int zone_dma_bits;
> >  static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> >  {
> >       dma_addr_t dev_addr = (dma_addr_t)paddr;
> > +     /* The compiler should remove the 2nd term if !DMA_PFN_OFFSET_MAP */
> > +     unsigned long dma_pfn_offset = dev->dma_pfn_offset
> > +             + dma_pfn_offset_from_phys_addr(dev, paddr);
> >
> > -     return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
> > +     return dev_addr - ((dma_addr_t)dma_pfn_offset << PAGE_SHIFT);
> >  }
> >
> >  static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr)
> >  {
> >       phys_addr_t paddr = (phys_addr_t)dev_addr;
> > +     /* The compiler should remove the 2nd term if !DMA_PFN_OFFSET_MAP */
> > +     unsigned long dma_pfn_offset = dev->dma_pfn_offset
> > +             + dma_pfn_offset_from_dma_addr(dev, paddr);
> >
> > -     return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
> > +     return paddr + ((phys_addr_t)dma_pfn_offset << PAGE_SHIFT);
> >  }
> >  #endif /* !CONFIG_ARCH_HAS_PHYS_TO_DMA */
> >
> > diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
> > index 330ad58fbf4d..91940bba2229 100644
> > --- a/include/linux/dma-mapping.h
> > +++ b/include/linux/dma-mapping.h
> > @@ -256,6 +256,52 @@ static inline void dma_direct_sync_sg_for_cpu(struct device *dev,
> >  size_t dma_direct_max_mapping_size(struct device *dev);
> >
> >  #ifdef CONFIG_HAS_DMA
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +struct dma_pfn_offset_region {
>
> > +     phys_addr_t     cpu_beg;
> > +     phys_addr_t     cpu_end;
> > +     dma_addr_t      dma_beg;
> > +     dma_addr_t      dma_end;
>
> Perhaps
>         s,beg,start,
> in above names
>
Okay.

>
> > +     unsigned long   pfn_offset;
> > +};
> > +
> > +static inline unsigned long dma_pfn_offset_from_dma_addr(struct device *dev,
> > +                                                      dma_addr_t dma_addr)
> > +{
> > +     const struct dma_pfn_offset_region *m = dev->dma_pfn_offset_map;
>
> > +     if (m)
> > +             for (; m->cpu_end; m++)
>
> Why not simple
>
>         while (m) {
>                 ...
>         }
>
> ?
>
That won't work;  'm' is either null or a valid pointer to an array
which has an additional entry that is 0-filled..  If non-null, 'm'
will never turn into NULL via 'm++' and the while loop will not
terminate.
>
>
> > +                     if (dma_addr >= m->dma_beg && dma_addr < m->dma_end)
> > +                             return m->pfn_offset;
> > +     return 0;
> > +}
> > +
> > +static inline unsigned long dma_pfn_offset_from_phys_addr(struct device *dev,
> > +                                                       phys_addr_t paddr)
> > +{
> > +     const struct dma_pfn_offset_region *m = dev->dma_pfn_offset_map;
> > +
>
> > +     if (m)
> > +             for (; m->cpu_end; m++)
>
> Ditto.
>
> > +                     if (paddr >= m->cpu_beg && paddr < m->cpu_end)
> > +                             return m->pfn_offset;
> > +     return 0;
> > +}
> > +#else  /* CONFIG_DMA_PFN_OFFSET_MAP */
> > +static inline unsigned long dma_pfn_offset_from_dma_addr(struct device *dev,
> > +                                                      dma_addr_t dma_addr)
> > +{
> > +     return 0;
> > +}
> > +
> > +static inline unsigned long dma_pfn_offset_from_phys_addr(struct device *dev,
> > +                                                       phys_addr_t paddr)
> > +{
> > +     return 0;
> > +}
> > +#endif /* CONFIG_DMA_PFN_OFFSET_MAP */
> > +
> >  #include <asm/dma-mapping.h>
> >
> >  static inline const struct dma_map_ops *get_dma_ops(struct device *dev)
> > diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
> > index 4c103a24e380..ceb7e5e8f501 100644
> > --- a/kernel/dma/Kconfig
> > +++ b/kernel/dma/Kconfig
> > @@ -195,3 +195,16 @@ config DMA_API_DEBUG_SG
> >         is technically out-of-spec.
> >
> >         If unsure, say N.
> > +
> > +config DMA_PFN_OFFSET_MAP
> > +     bool "Uses a DMA range map to calculate PFN offset"
> > +     depends on PCIE_BRCMSTB
>
> > +     default n
>
> Redundant.

Okay.
>
> > +     help
> > +       Some devices have a dma-range that gets converted to
> > +       a dev->dma_pfn_offset value.  This option is for the
> > +       atypical case of there being multiple dma-ranges requiring
> > +       multiple pfn offsets, which are selected from when
> > +       converting to phys to dma and vice versa.
> > +
> > +       If unsure, say N.
> > --
> > 2.17.1
> >
>
> --
> With Best Regards,
> Andy Shevchenko


Thanks!
Jim Quinlan

Re: [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Nicolas Saenz Julienne]

[-- Attachment #1: Type: text/plain, Size: 6547 bytes --]

Hi Jim,
one thing comes to mind, there is a small test suite in drivers/of/unittest.c
(specifically of_unittest_pci_dma_ranges()) you could extend it to include your
use cases.

On Tue, 2020-05-26 at 15:12 -0400, Jim Quinlan wrote:
> The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
> similar to 'dma_pfn_offset' except that the offset chosen depends on the
> cpu or dma address involved.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> ---
>  drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
>  drivers/usb/core/message.c  |  3 ++
>  drivers/usb/core/usb.c      |  3 ++
>  include/linux/device.h      | 10 +++++-
>  include/linux/dma-direct.h  | 10 ++++--
>  include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
>  kernel/dma/Kconfig          | 13 ++++++++
>  7 files changed, 144 insertions(+), 6 deletions(-)
> 

[...]

> @@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct
> device_node *np, u64 *dma_addr,
>  		pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
>  			 range.bus_addr, range.cpu_addr, range.size);
>  
> +		num_ranges++;
>  		if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset)
> {
> -			pr_warn("Can't handle multiple dma-ranges with different
> offsets on node(%pOF)\n", node);
> -			/* Don't error out as we'd break some existing DTs */
> -			continue;
> +			if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
> +				pr_warn("Can't handle multiple dma-ranges with
> different offsets on node(%pOF)\n", node);
> +				pr_warn("Perhaps set DMA_PFN_OFFSET_MAP=y?\n");
> +				/*
> +				 * Don't error out as we'd break some existing
> +				 * DTs that are using configs w/o
> +				 * CONFIG_DMA_PFN_OFFSET_MAP set.
> +				 */
> +				continue;

dev->bus_dma_limit is set in of_dma_configure(), this function's caller, based
on dma_start's value (set after this continue). So you'd be effectively setting
the dev->bus_dma_limit to whatever we get from the first dma-range.

This can be troublesome depending on how the dma-ranges are setup, for example
if the first dma-range doesn't include the CMA area, in arm64 generally set as
high as possible in ZONE_DMA32, that would render it useless for
dma/{direct/swiotlb}. Again depending on the bus_dma_limit value, if smaller
than ZONE_DMA you'd be unable to allocate any DMA memory.

IMO, a solution to this calls for a revamp of dma-direct's dma_capable(): match
the target DMA memory area with each dma-range we have to see if it fits.

> +			}
> +			dma_multi_pfn_offset = true;
>  		}
>  		dma_offset = range.cpu_addr - range.bus_addr;
>  
> @@ -991,6 +1043,13 @@ int of_dma_get_range(struct device *dev, struct
> device_node *np, u64 *dma_addr,
>  			dma_end = range.bus_addr + range.size;
>  	}
>  
> +	if (dma_multi_pfn_offset) {
> +		dma_offset = 0;
> +		ret = attach_dma_pfn_offset_map(dev, node, num_ranges);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	if (dma_start >= dma_end) {
>  		ret = -EINVAL;
>  		pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
> diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> index 6197938dcc2d..aaa3e58f5eb4 100644
> --- a/drivers/usb/core/message.c
> +++ b/drivers/usb/core/message.c
> @@ -1960,6 +1960,9 @@ int usb_set_configuration(struct usb_device *dev, int
> configuration)
>  		 */
>  		intf->dev.dma_mask = dev->dev.dma_mask;
>  		intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +		intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
> +#endif

Thanks for looking at this, that said, I see more instances of drivers changing
dma_pfn_offset outside of the core code. Why not doing this there too?

Also, are we 100% sure that dev->dev.dma_pfn_offset isn't going to be freed
before we're done using intf->dev? Maybe it's safer to copy the ranges?

>  		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
>  		intf->minor = -1;
>  		device_initialize(&intf->dev);
> diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> index f16c26dc079d..d2ed4d90e56e 100644
> --- a/drivers/usb/core/usb.c
> +++ b/drivers/usb/core/usb.c
> @@ -612,6 +612,9 @@ struct usb_device *usb_alloc_dev(struct usb_device
> *parent,
>  	 */
>  	dev->dev.dma_mask = bus->sysdev->dma_mask;
>  	dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +	dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
> +#endif
>  	set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
>  	dev->state = USB_STATE_ATTACHED;
>  	dev->lpm_disable_count = 1;
> diff --git a/include/linux/device.h b/include/linux/device.h
> index ac8e37cd716a..67a240ad4fc5 100644
> --- a/include/linux/device.h
> +++ b/include/linux/device.h
> @@ -493,6 +493,8 @@ struct dev_links_info {
>   * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
>   *		DMA limit than the device itself supports.
>   * @dma_pfn_offset: offset of DMA memory range relatively of RAM
> + * @dma_pfn_offset_map:	Like dma_pfn_offset but used when there are
> multiple
> + *		pfn offsets for multiple dma-ranges.
>   * @dma_parms:	A low level driver may set these to teach IOMMU code
> about
>   * 		segment limitations.
>   * @dma_pools:	Dma pools (if dma'ble device).
> @@ -578,7 +580,13 @@ struct device {
>  					     allocations such descriptors. */
>  	u64		bus_dma_limit;	/* upstream dma constraint */
>  	unsigned long	dma_pfn_offset;
> -
> +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> +	const struct dma_pfn_offset_region *dma_pfn_offset_map;
> +					/* Like dma_pfn_offset, but for
> +					 * the unlikely case of multiple
> +					 * offsets. If non-null, dma_pfn_offset
> +					 * will be set to 0. */
> +#endif

I'm still sad this doesn't fully replace dma_pfn_offset & bus_dma_limit. I feel
the extra logic involved in incorporating this as default isn't going to be
noticeable as far as performance is concerned to single dma-range users, and
it'd make for a nicer DMA code. Also you'd force everyone to test their changes
on the multi dma-ranges code path, as opposed to having this disabled 99.9% of
the time (hence broken every so often).

Note that I sympathize with the amount of work involved on improving that, so
better wait to hear what more knowledgeable people have to say about this :)

Regards,
Nicolas


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Jim Quinlan]

Hi Nicolas,

On Wed, May 27, 2020 at 11:00 AM Nicolas Saenz Julienne
<nsaenzjulienne@suse.de> wrote:
>
> Hi Jim,
> one thing comes to mind, there is a small test suite in drivers/of/unittest.c
> (specifically of_unittest_pci_dma_ranges()) you could extend it to include your
> use cases.
Sure, will check out.
>
> On Tue, 2020-05-26 at 15:12 -0400, Jim Quinlan wrote:
> > The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> > the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
> > similar to 'dma_pfn_offset' except that the offset chosen depends on the
> > cpu or dma address involved.
> >
> > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > ---
> >  drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
> >  drivers/usb/core/message.c  |  3 ++
> >  drivers/usb/core/usb.c      |  3 ++
> >  include/linux/device.h      | 10 +++++-
> >  include/linux/dma-direct.h  | 10 ++++--
> >  include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
> >  kernel/dma/Kconfig          | 13 ++++++++
> >  7 files changed, 144 insertions(+), 6 deletions(-)
> >
>
> [...]
>
> > @@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct
> > device_node *np, u64 *dma_addr,
> >               pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> >                        range.bus_addr, range.cpu_addr, range.size);
> >
> > +             num_ranges++;
> >               if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset)
> > {
> > -                     pr_warn("Can't handle multiple dma-ranges with different
> > offsets on node(%pOF)\n", node);
> > -                     /* Don't error out as we'd break some existing DTs */
> > -                     continue;
> > +                     if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
> > +                             pr_warn("Can't handle multiple dma-ranges with
> > different offsets on node(%pOF)\n", node);
> > +                             pr_warn("Perhaps set DMA_PFN_OFFSET_MAP=y?\n");
> > +                             /*
> > +                              * Don't error out as we'd break some existing
> > +                              * DTs that are using configs w/o
> > +                              * CONFIG_DMA_PFN_OFFSET_MAP set.
> > +                              */
> > +                             continue;
>
> dev->bus_dma_limit is set in of_dma_configure(), this function's caller, based
> on dma_start's value (set after this continue). So you'd be effectively setting
> the dev->bus_dma_limit to whatever we get from the first dma-range.
I'm not seeing that at all.  On the  evaluation of each dma-range,
dma_start and dma_end are re-evaluated to be the lowest and highest
bus values of the  dma-ranges seen so far.  After all dma-ranges are
examined,  dev->bus_dma_limit being set to the highest.  In fact, the
current code -- ie before my commits -- already does this for multiple
dma-ranges as long as the cpu-bus offset is the same in the
dma-ranges.
>
> This can be troublesome depending on how the dma-ranges are setup, for example
> if the first dma-range doesn't include the CMA area, in arm64 generally set as
> high as possible in ZONE_DMA32, that would render it useless for
> dma/{direct/swiotlb}. Again depending on the bus_dma_limit value, if smaller
> than ZONE_DMA you'd be unable to allocate any DMA memory.
>
> IMO, a solution to this calls for a revamp of dma-direct's dma_capable(): match
> the target DMA memory area with each dma-range we have to see if it fits.
>
> > +                     }
> > +                     dma_multi_pfn_offset = true;
> >               }
> >               dma_offset = range.cpu_addr - range.bus_addr;
> >
> > @@ -991,6 +1043,13 @@ int of_dma_get_range(struct device *dev, struct
> > device_node *np, u64 *dma_addr,
> >                       dma_end = range.bus_addr + range.size;
> >       }
> >
> > +     if (dma_multi_pfn_offset) {
> > +             dma_offset = 0;
> > +             ret = attach_dma_pfn_offset_map(dev, node, num_ranges);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +
> >       if (dma_start >= dma_end) {
> >               ret = -EINVAL;
> >               pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
> > diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> > index 6197938dcc2d..aaa3e58f5eb4 100644
> > --- a/drivers/usb/core/message.c
> > +++ b/drivers/usb/core/message.c
> > @@ -1960,6 +1960,9 @@ int usb_set_configuration(struct usb_device *dev, int
> > configuration)
> >                */
> >               intf->dev.dma_mask = dev->dev.dma_mask;
> >               intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +             intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
> > +#endif
>
> Thanks for looking at this, that said, I see more instances of drivers changing
> dma_pfn_offset outside of the core code. Why not doing this there too?
>
> Also, are we 100% sure that dev->dev.dma_pfn_offset isn't going to be freed
> before we're done using intf->dev? Maybe it's safer to copy the ranges?
>
> >               INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
> >               intf->minor = -1;
> >               device_initialize(&intf->dev);
> > diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> > index f16c26dc079d..d2ed4d90e56e 100644
> > --- a/drivers/usb/core/usb.c
> > +++ b/drivers/usb/core/usb.c
> > @@ -612,6 +612,9 @@ struct usb_device *usb_alloc_dev(struct usb_device
> > *parent,
> >        */
> >       dev->dev.dma_mask = bus->sysdev->dma_mask;
> >       dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +     dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
> > +#endif
> >       set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
> >       dev->state = USB_STATE_ATTACHED;
> >       dev->lpm_disable_count = 1;
> > diff --git a/include/linux/device.h b/include/linux/device.h
> > index ac8e37cd716a..67a240ad4fc5 100644
> > --- a/include/linux/device.h
> > +++ b/include/linux/device.h
> > @@ -493,6 +493,8 @@ struct dev_links_info {
> >   * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
> >   *           DMA limit than the device itself supports.
> >   * @dma_pfn_offset: offset of DMA memory range relatively of RAM
> > + * @dma_pfn_offset_map:      Like dma_pfn_offset but used when there are
> > multiple
> > + *           pfn offsets for multiple dma-ranges.
> >   * @dma_parms:       A low level driver may set these to teach IOMMU code
> > about
> >   *           segment limitations.
> >   * @dma_pools:       Dma pools (if dma'ble device).
> > @@ -578,7 +580,13 @@ struct device {
> >                                            allocations such descriptors. */
> >       u64             bus_dma_limit;  /* upstream dma constraint */
> >       unsigned long   dma_pfn_offset;
> > -
> > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > +     const struct dma_pfn_offset_region *dma_pfn_offset_map;
> > +                                     /* Like dma_pfn_offset, but for
> > +                                      * the unlikely case of multiple
> > +                                      * offsets. If non-null, dma_pfn_offset
> > +                                      * will be set to 0. */
> > +#endif
>
> I'm still sad this doesn't fully replace dma_pfn_offset & bus_dma_limit. I feel
> the extra logic involved in incorporating this as default isn't going to be
> noticeable as far as performance is concerned to single dma-range users, and
> it'd make for a nicer DMA code. Also you'd force everyone to test their changes
> on the multi dma-ranges code path, as opposed to having this disabled 99.9% of
> the time (hence broken every so often).
Good point.
>
> Note that I sympathize with the amount of work involved on improving that, so
> better wait to hear what more knowledgeable people have to say about this :)
Yes, I agree.  I want to avoid coding and testing one solution only to
have a different reviewer NAK it.

Many thanks,
Jim
>
> Regards,
> Nicolas
>

Re: [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Nicolas Saenz Julienne]

[-- Attachment #1: Type: text/plain, Size: 3658 bytes --]

Hi Jim,

On Wed, 2020-05-27 at 11:43 -0400, Jim Quinlan wrote:
> Hi Nicolas,
> 
> On Wed, May 27, 2020 at 11:00 AM Nicolas Saenz Julienne
> <nsaenzjulienne@suse.de> wrote:
> > Hi Jim,
> > one thing comes to mind, there is a small test suite in
> > drivers/of/unittest.c
> > (specifically of_unittest_pci_dma_ranges()) you could extend it to include
> > your
> > use cases.
> Sure, will check out.
> > On Tue, 2020-05-26 at 15:12 -0400, Jim Quinlan wrote:
> > > The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> > > the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
> > > similar to 'dma_pfn_offset' except that the offset chosen depends on the
> > > cpu or dma address involved.
> > > 
> > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > > ---
> > >  drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
> > >  drivers/usb/core/message.c  |  3 ++
> > >  drivers/usb/core/usb.c      |  3 ++
> > >  include/linux/device.h      | 10 +++++-
> > >  include/linux/dma-direct.h  | 10 ++++--
> > >  include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
> > >  kernel/dma/Kconfig          | 13 ++++++++
> > >  7 files changed, 144 insertions(+), 6 deletions(-)
> > > 
> > 
> > [...]
> > 
> > > @@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct
> > > device_node *np, u64 *dma_addr,
> > >               pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> > >                        range.bus_addr, range.cpu_addr, range.size);
> > > 
> > > +             num_ranges++;
> > >               if (dma_offset && range.cpu_addr - range.bus_addr !=
> > > dma_offset)
> > > {
> > > -                     pr_warn("Can't handle multiple dma-ranges with
> > > different
> > > offsets on node(%pOF)\n", node);
> > > -                     /* Don't error out as we'd break some existing DTs
> > > */
> > > -                     continue;
> > > +                     if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
> > > +                             pr_warn("Can't handle multiple dma-ranges
> > > with
> > > different offsets on node(%pOF)\n", node);
> > > +                             pr_warn("Perhaps set
> > > DMA_PFN_OFFSET_MAP=y?\n");
> > > +                             /*
> > > +                              * Don't error out as we'd break some
> > > existing
> > > +                              * DTs that are using configs w/o
> > > +                              * CONFIG_DMA_PFN_OFFSET_MAP set.
> > > +                              */
> > > +                             continue;
> > 
> > dev->bus_dma_limit is set in of_dma_configure(), this function's caller,
> > based
> > on dma_start's value (set after this continue). So you'd be effectively
> > setting
> > the dev->bus_dma_limit to whatever we get from the first dma-range.
> I'm not seeing that at all.  On the  evaluation of each dma-range,
> dma_start and dma_end are re-evaluated to be the lowest and highest
> bus values of the  dma-ranges seen so far.  After all dma-ranges are
> examined,  dev->bus_dma_limit being set to the highest.  In fact, the
> current code -- ie before my commits -- already does this for multiple
> dma-ranges as long as the cpu-bus offset is the same in the
> dma-ranges.

Sorry I got carried away, you're right.

So I understand there is an underlaying assumption that the non DMAble memory
space will always sit on top of the bus memory space, as intertwined as it
might be, so as to every phys_to_dma() call on non DMAble memory to fall above
bus_dma_limit.

Regards,
Nicolas


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 02/14] ata: ahci_brcm: Fix use of BCM7216 reset controller

[Florian Fainelli]

On 5/26/2020 12:12 PM, Jim Quinlan wrote:
> From: Jim Quinlan <jquinlan@broadcom.com>
> 
> A reset controller "rescal" is shared between the AHCI driver and the PCIe
> driver for the BrcmSTB 7216 chip.  The code is modified to allow this
> sharing and to deassert() properly.
> 
> Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>

This patch is actually a bug fix and should have:

Fixes: 272ecd60a636 ("ata: ahci_brcm: BCM7216 reset is self de-asserting")
Fixes: c345ec6a50e9 ("ata: ahci_brcm: Support BCM7216 reset controller
name")

and it could probably be merged out of this patch series I believe.
-- 
Florian

Re: [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Rob Herring]

On Wed, May 27, 2020 at 9:43 AM Jim Quinlan <james.quinlan@broadcom.com> wrote:
>
> Hi Nicolas,
>
> On Wed, May 27, 2020 at 11:00 AM Nicolas Saenz Julienne
> <nsaenzjulienne@suse.de> wrote:
> >
> > Hi Jim,
> > one thing comes to mind, there is a small test suite in drivers/of/unittest.c
> > (specifically of_unittest_pci_dma_ranges()) you could extend it to include your
> > use cases.
> Sure, will check out.
> >
> > On Tue, 2020-05-26 at 15:12 -0400, Jim Quinlan wrote:
> > > The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> > > the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
> > > similar to 'dma_pfn_offset' except that the offset chosen depends on the
> > > cpu or dma address involved.
> > >
> > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > > ---
> > >  drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
> > >  drivers/usb/core/message.c  |  3 ++
> > >  drivers/usb/core/usb.c      |  3 ++
> > >  include/linux/device.h      | 10 +++++-
> > >  include/linux/dma-direct.h  | 10 ++++--
> > >  include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
> > >  kernel/dma/Kconfig          | 13 ++++++++
> > >  7 files changed, 144 insertions(+), 6 deletions(-)
> > >
> >
> > [...]
> >
> > > @@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct
> > > device_node *np, u64 *dma_addr,
> > >               pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> > >                        range.bus_addr, range.cpu_addr, range.size);
> > >
> > > +             num_ranges++;
> > >               if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset)
> > > {
> > > -                     pr_warn("Can't handle multiple dma-ranges with different
> > > offsets on node(%pOF)\n", node);
> > > -                     /* Don't error out as we'd break some existing DTs */
> > > -                     continue;
> > > +                     if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
> > > +                             pr_warn("Can't handle multiple dma-ranges with
> > > different offsets on node(%pOF)\n", node);
> > > +                             pr_warn("Perhaps set DMA_PFN_OFFSET_MAP=y?\n");
> > > +                             /*
> > > +                              * Don't error out as we'd break some existing
> > > +                              * DTs that are using configs w/o
> > > +                              * CONFIG_DMA_PFN_OFFSET_MAP set.
> > > +                              */
> > > +                             continue;
> >
> > dev->bus_dma_limit is set in of_dma_configure(), this function's caller, based
> > on dma_start's value (set after this continue). So you'd be effectively setting
> > the dev->bus_dma_limit to whatever we get from the first dma-range.
> I'm not seeing that at all.  On the  evaluation of each dma-range,
> dma_start and dma_end are re-evaluated to be the lowest and highest
> bus values of the  dma-ranges seen so far.  After all dma-ranges are
> examined,  dev->bus_dma_limit being set to the highest.  In fact, the
> current code -- ie before my commits -- already does this for multiple
> dma-ranges as long as the cpu-bus offset is the same in the
> dma-ranges.
> >
> > This can be troublesome depending on how the dma-ranges are setup, for example
> > if the first dma-range doesn't include the CMA area, in arm64 generally set as
> > high as possible in ZONE_DMA32, that would render it useless for
> > dma/{direct/swiotlb}. Again depending on the bus_dma_limit value, if smaller
> > than ZONE_DMA you'd be unable to allocate any DMA memory.
> >
> > IMO, a solution to this calls for a revamp of dma-direct's dma_capable(): match
> > the target DMA memory area with each dma-range we have to see if it fits.
> >
> > > +                     }
> > > +                     dma_multi_pfn_offset = true;
> > >               }
> > >               dma_offset = range.cpu_addr - range.bus_addr;
> > >
> > > @@ -991,6 +1043,13 @@ int of_dma_get_range(struct device *dev, struct
> > > device_node *np, u64 *dma_addr,
> > >                       dma_end = range.bus_addr + range.size;
> > >       }
> > >
> > > +     if (dma_multi_pfn_offset) {
> > > +             dma_offset = 0;
> > > +             ret = attach_dma_pfn_offset_map(dev, node, num_ranges);
> > > +             if (ret)
> > > +                     return ret;
> > > +     }
> > > +
> > >       if (dma_start >= dma_end) {
> > >               ret = -EINVAL;
> > >               pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
> > > diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> > > index 6197938dcc2d..aaa3e58f5eb4 100644
> > > --- a/drivers/usb/core/message.c
> > > +++ b/drivers/usb/core/message.c
> > > @@ -1960,6 +1960,9 @@ int usb_set_configuration(struct usb_device *dev, int
> > > configuration)
> > >                */
> > >               intf->dev.dma_mask = dev->dev.dma_mask;
> > >               intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
> > > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > > +             intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
> > > +#endif
> >
> > Thanks for looking at this, that said, I see more instances of drivers changing
> > dma_pfn_offset outside of the core code. Why not doing this there too?
> >
> > Also, are we 100% sure that dev->dev.dma_pfn_offset isn't going to be freed
> > before we're done using intf->dev? Maybe it's safer to copy the ranges?
> >
> > >               INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
> > >               intf->minor = -1;
> > >               device_initialize(&intf->dev);
> > > diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> > > index f16c26dc079d..d2ed4d90e56e 100644
> > > --- a/drivers/usb/core/usb.c
> > > +++ b/drivers/usb/core/usb.c
> > > @@ -612,6 +612,9 @@ struct usb_device *usb_alloc_dev(struct usb_device
> > > *parent,
> > >        */
> > >       dev->dev.dma_mask = bus->sysdev->dma_mask;
> > >       dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
> > > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > > +     dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
> > > +#endif
> > >       set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
> > >       dev->state = USB_STATE_ATTACHED;
> > >       dev->lpm_disable_count = 1;
> > > diff --git a/include/linux/device.h b/include/linux/device.h
> > > index ac8e37cd716a..67a240ad4fc5 100644
> > > --- a/include/linux/device.h
> > > +++ b/include/linux/device.h
> > > @@ -493,6 +493,8 @@ struct dev_links_info {
> > >   * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
> > >   *           DMA limit than the device itself supports.
> > >   * @dma_pfn_offset: offset of DMA memory range relatively of RAM
> > > + * @dma_pfn_offset_map:      Like dma_pfn_offset but used when there are
> > > multiple
> > > + *           pfn offsets for multiple dma-ranges.
> > >   * @dma_parms:       A low level driver may set these to teach IOMMU code
> > > about
> > >   *           segment limitations.
> > >   * @dma_pools:       Dma pools (if dma'ble device).
> > > @@ -578,7 +580,13 @@ struct device {
> > >                                            allocations such descriptors. */
> > >       u64             bus_dma_limit;  /* upstream dma constraint */
> > >       unsigned long   dma_pfn_offset;
> > > -
> > > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > > +     const struct dma_pfn_offset_region *dma_pfn_offset_map;
> > > +                                     /* Like dma_pfn_offset, but for
> > > +                                      * the unlikely case of multiple
> > > +                                      * offsets. If non-null, dma_pfn_offset
> > > +                                      * will be set to 0. */
> > > +#endif
> >
> > I'm still sad this doesn't fully replace dma_pfn_offset & bus_dma_limit. I feel
> > the extra logic involved in incorporating this as default isn't going to be
> > noticeable as far as performance is concerned to single dma-range users, and
> > it'd make for a nicer DMA code. Also you'd force everyone to test their changes
> > on the multi dma-ranges code path, as opposed to having this disabled 99.9% of
> > the time (hence broken every so often).
> Good point.

+1

> > Note that I sympathize with the amount of work involved on improving that, so
> > better wait to hear what more knowledgeable people have to say about this :)
> Yes, I agree.  I want to avoid coding and testing one solution only to
> have a different reviewer NAK it.

It's a pretty safe bet that everyone will prefer one code path over 2.

Rob

Re: [PATCH v2 03/14] dt-bindings: PCI: Add bindings for more Brcmstb chips

[Rob Herring]

On Tue, May 26, 2020 at 03:12:42PM -0400, Jim Quinlan wrote:
> From: Jim Quinlan <jquinlan@broadcom.com>
> 
> - Add compatible strings for three more Broadcom STB chips: 7278, 7216,
>   7211 (STB version of RPi4).
> - add new property 'brcm,scb-sizes'
> - add new property 'resets'
> - add new property 'reset-names'
> - allow 'ranges' and 'dma-ranges' to have more than one item and update
>   the example to show this.
> 
> Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
> ---
>  .../bindings/pci/brcm,stb-pcie.yaml           | 40 +++++++++++++++++--
>  1 file changed, 36 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 8680a0f86c5a..66a7df45983d 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -14,7 +14,13 @@ allOf:
>  
>  properties:
>    compatible:
> -    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> +    items:
> +      - enum:

Don't need items here. Just change the const to enum.

> +          - brcm,bcm2711-pcie # The Raspberry Pi 4
> +          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
> +          - brcm,bcm7278-pcie # Broadcom 7278 Arm
> +          - brcm,bcm7216-pcie # Broadcom 7216 Arm
> +          - brcm,bcm7445-pcie # Broadcom 7445 Arm
>  
>    reg:
>      maxItems: 1
> @@ -34,10 +40,12 @@ properties:
>        - const: msi
>  
>    ranges:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 4
>  
>    dma-ranges:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 6
>  
>    clocks:
>      maxItems: 1
> @@ -58,8 +66,30 @@ properties:
>  
>    aspm-no-l0s: true
>  
> +  resets:
> +    description: for "brcm,bcm7216-pcie", must be a valid reset
> +      phandle pointing to the RESCAL reset controller provider node.
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +
> +  reset-names:
> +    items:
> +      - const: rescal

These are going to need to be an if/then schema if they only apply to 
certain compatible(s).

> +
> +  brcm,scb-sizes:
> +    description: (u32, u32) tuple giving the 64bit PCIe memory
> +      viewport size of a memory controller.  There may be up to
> +      three controllers, and each size must be a power of two
> +      with a size greater or equal to the amount of memory the
> +      controller supports.

This sounds like what dma-ranges should express?

If not, we do have 64-bit size if that what you need.

> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +      - items:
> +          minItems: 2
> +          maxItems: 6
> +
>  required:
>    - reg
> +  - ranges
>    - dma-ranges
>    - "#interrupt-cells"
>    - interrupts
> @@ -93,7 +123,9 @@ examples:
>                      msi-parent = <&pcie0>;
>                      msi-controller;
>                      ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
> -                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
> +                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
> +                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
>                      brcm,enable-ssc;
> +                    brcm,scb-sizes = <0x0 0x80000000 0x0 0x80000000>;
>              };
>      };
> -- 
> 2.17.1
> 

Re: [PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[Rob Herring]

On Tue, May 26, 2020 at 03:12:39PM -0400, Jim Quinlan wrote:
> v2:
> Commit: "device core: Add ability to handle multiple dma offsets"
>   o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
>   o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
>   o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
>   o dev->dma_pfn_map => dev->dma_pfn_offset_map
>   o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
>   o In device.h: s/const void */const struct dma_pfn_offset_region */
>   o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since
>     guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
>   o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now
>     dev->dma_pfn_offset_map is copied as well.
>   o Merged two of the DMA commits into one (Christoph).
> 
> Commit "arm: dma-mapping: Invoke dma offset func if needed":
>   o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET
> 
> Other commits' changes:
>   o Removed need for carrying of_id var in priv (Nicolas)
>   o Commit message rewordings (Bjorn)
>   o Commit log messages filled to 75 chars (Bjorn)
>   o devm_reset_control_get_shared())
>     => devm_reset_control_get_optional_shared (Philipp)
>   o Add call to reset_control_assert() in PCIe remove routines (Philipp)
> 
> v1:
> This patchset expands the usefulness of the Broadcom Settop Box PCIe
> controller by building upon the PCIe driver used currently by the
> Raspbery Pi.  Other forms of this patchset were submitted by me years
> ago and not accepted; the major sticking point was the code required
> for the DMA remapping needed for the PCIe driver to work [1].
> 
> There have been many changes to the DMA and OF subsystems since that
> time, making a cleaner and less intrusive patchset possible.  This
> patchset implements a generalization of "dev->dma_pfn_offset", except
> that instead of a single scalar offset it provides for multiple
> offsets via a function which depends upon the "dma-ranges" property of
> the PCIe host controller.  This is required for proper functionality
> of the BrcmSTB PCIe controller and possibly some other devices.

If you can enable the h/w support without the multiple offset support, 
then I'd split up this series. The latter part might take a bit more 
time.

Rob

Re: [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets

[Jim Quinlan]

On Fri, May 29, 2020 at 1:35 PM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Wed, May 27, 2020 at 9:43 AM Jim Quinlan <james.quinlan@broadcom.com> wrote:
> >
> > Hi Nicolas,
> >
> > On Wed, May 27, 2020 at 11:00 AM Nicolas Saenz Julienne
> > <nsaenzjulienne@suse.de> wrote:
> > >
> > > Hi Jim,
> > > one thing comes to mind, there is a small test suite in drivers/of/unittest.c
> > > (specifically of_unittest_pci_dma_ranges()) you could extend it to include your
> > > use cases.
> > Sure, will check out.
> > >
> > > On Tue, 2020-05-26 at 15:12 -0400, Jim Quinlan wrote:
> > > > The new field in struct device 'dma_pfn_offset_map' is used to facilitate
> > > > the use of multiple pfn offsets between cpu addrs and dma addrs.  It is
> > > > similar to 'dma_pfn_offset' except that the offset chosen depends on the
> > > > cpu or dma address involved.
> > > >
> > > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > > > ---
> > > >  drivers/of/address.c        | 65 +++++++++++++++++++++++++++++++++++--
> > > >  drivers/usb/core/message.c  |  3 ++
> > > >  drivers/usb/core/usb.c      |  3 ++
> > > >  include/linux/device.h      | 10 +++++-
> > > >  include/linux/dma-direct.h  | 10 ++++--
> > > >  include/linux/dma-mapping.h | 46 ++++++++++++++++++++++++++
> > > >  kernel/dma/Kconfig          | 13 ++++++++
> > > >  7 files changed, 144 insertions(+), 6 deletions(-)
> > > >
> > >
> > > [...]
> > >
> > > > @@ -977,10 +1020,19 @@ int of_dma_get_range(struct device *dev, struct
> > > > device_node *np, u64 *dma_addr,
> > > >               pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> > > >                        range.bus_addr, range.cpu_addr, range.size);
> > > >
> > > > +             num_ranges++;
> > > >               if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset)
> > > > {
> > > > -                     pr_warn("Can't handle multiple dma-ranges with different
> > > > offsets on node(%pOF)\n", node);
> > > > -                     /* Don't error out as we'd break some existing DTs */
> > > > -                     continue;
> > > > +                     if (!IS_ENABLED(CONFIG_DMA_PFN_OFFSET_MAP)) {
> > > > +                             pr_warn("Can't handle multiple dma-ranges with
> > > > different offsets on node(%pOF)\n", node);
> > > > +                             pr_warn("Perhaps set DMA_PFN_OFFSET_MAP=y?\n");
> > > > +                             /*
> > > > +                              * Don't error out as we'd break some existing
> > > > +                              * DTs that are using configs w/o
> > > > +                              * CONFIG_DMA_PFN_OFFSET_MAP set.
> > > > +                              */
> > > > +                             continue;
> > >
> > > dev->bus_dma_limit is set in of_dma_configure(), this function's caller, based
> > > on dma_start's value (set after this continue). So you'd be effectively setting
> > > the dev->bus_dma_limit to whatever we get from the first dma-range.
> > I'm not seeing that at all.  On the  evaluation of each dma-range,
> > dma_start and dma_end are re-evaluated to be the lowest and highest
> > bus values of the  dma-ranges seen so far.  After all dma-ranges are
> > examined,  dev->bus_dma_limit being set to the highest.  In fact, the
> > current code -- ie before my commits -- already does this for multiple
> > dma-ranges as long as the cpu-bus offset is the same in the
> > dma-ranges.
> > >
> > > This can be troublesome depending on how the dma-ranges are setup, for example
> > > if the first dma-range doesn't include the CMA area, in arm64 generally set as
> > > high as possible in ZONE_DMA32, that would render it useless for
> > > dma/{direct/swiotlb}. Again depending on the bus_dma_limit value, if smaller
> > > than ZONE_DMA you'd be unable to allocate any DMA memory.
> > >
> > > IMO, a solution to this calls for a revamp of dma-direct's dma_capable(): match
> > > the target DMA memory area with each dma-range we have to see if it fits.
> > >
> > > > +                     }
> > > > +                     dma_multi_pfn_offset = true;
> > > >               }
> > > >               dma_offset = range.cpu_addr - range.bus_addr;
> > > >
> > > > @@ -991,6 +1043,13 @@ int of_dma_get_range(struct device *dev, struct
> > > > device_node *np, u64 *dma_addr,
> > > >                       dma_end = range.bus_addr + range.size;
> > > >       }
> > > >
> > > > +     if (dma_multi_pfn_offset) {
> > > > +             dma_offset = 0;
> > > > +             ret = attach_dma_pfn_offset_map(dev, node, num_ranges);
> > > > +             if (ret)
> > > > +                     return ret;
> > > > +     }
> > > > +
> > > >       if (dma_start >= dma_end) {
> > > >               ret = -EINVAL;
> > > >               pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
> > > > diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> > > > index 6197938dcc2d..aaa3e58f5eb4 100644
> > > > --- a/drivers/usb/core/message.c
> > > > +++ b/drivers/usb/core/message.c
> > > > @@ -1960,6 +1960,9 @@ int usb_set_configuration(struct usb_device *dev, int
> > > > configuration)
> > > >                */
> > > >               intf->dev.dma_mask = dev->dev.dma_mask;
> > > >               intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
> > > > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > > > +             intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
> > > > +#endif
> > >
> > > Thanks for looking at this, that said, I see more instances of drivers changing
> > > dma_pfn_offset outside of the core code. Why not doing this there too?
> > >
> > > Also, are we 100% sure that dev->dev.dma_pfn_offset isn't going to be freed
> > > before we're done using intf->dev? Maybe it's safer to copy the ranges?
> > >
> > > >               INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
> > > >               intf->minor = -1;
> > > >               device_initialize(&intf->dev);
> > > > diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> > > > index f16c26dc079d..d2ed4d90e56e 100644
> > > > --- a/drivers/usb/core/usb.c
> > > > +++ b/drivers/usb/core/usb.c
> > > > @@ -612,6 +612,9 @@ struct usb_device *usb_alloc_dev(struct usb_device
> > > > *parent,
> > > >        */
> > > >       dev->dev.dma_mask = bus->sysdev->dma_mask;
> > > >       dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
> > > > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > > > +     dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
> > > > +#endif
> > > >       set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
> > > >       dev->state = USB_STATE_ATTACHED;
> > > >       dev->lpm_disable_count = 1;
> > > > diff --git a/include/linux/device.h b/include/linux/device.h
> > > > index ac8e37cd716a..67a240ad4fc5 100644
> > > > --- a/include/linux/device.h
> > > > +++ b/include/linux/device.h
> > > > @@ -493,6 +493,8 @@ struct dev_links_info {
> > > >   * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
> > > >   *           DMA limit than the device itself supports.
> > > >   * @dma_pfn_offset: offset of DMA memory range relatively of RAM
> > > > + * @dma_pfn_offset_map:      Like dma_pfn_offset but used when there are
> > > > multiple
> > > > + *           pfn offsets for multiple dma-ranges.
> > > >   * @dma_parms:       A low level driver may set these to teach IOMMU code
> > > > about
> > > >   *           segment limitations.
> > > >   * @dma_pools:       Dma pools (if dma'ble device).
> > > > @@ -578,7 +580,13 @@ struct device {
> > > >                                            allocations such descriptors. */
> > > >       u64             bus_dma_limit;  /* upstream dma constraint */
> > > >       unsigned long   dma_pfn_offset;
> > > > -
> > > > +#ifdef CONFIG_DMA_PFN_OFFSET_MAP
> > > > +     const struct dma_pfn_offset_region *dma_pfn_offset_map;
> > > > +                                     /* Like dma_pfn_offset, but for
> > > > +                                      * the unlikely case of multiple
> > > > +                                      * offsets. If non-null, dma_pfn_offset
> > > > +                                      * will be set to 0. */
> > > > +#endif
> > >
> > > I'm still sad this doesn't fully replace dma_pfn_offset & bus_dma_limit. I feel
> > > the extra logic involved in incorporating this as default isn't going to be
> > > noticeable as far as performance is concerned to single dma-range users, and
> > > it'd make for a nicer DMA code. Also you'd force everyone to test their changes
> > > on the multi dma-ranges code path, as opposed to having this disabled 99.9% of
> > > the time (hence broken every so often).
> > Good point.
>
> +1
>
> > > Note that I sympathize with the amount of work involved on improving that, so
> > > better wait to hear what more knowledgeable people have to say about this :)
> > Yes, I agree.  I want to avoid coding and testing one solution only to
> > have a different reviewer NAK it.
>
> It's a pretty safe bet that everyone will prefer one code path over 2.
>
> Rob
Thanks for  the input.  Will do, and send out v3 ASAP.
Thanks, Jim

Re: [PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips

[Jim Quinlan]

On Fri, May 29, 2020 at 1:49 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, May 26, 2020 at 03:12:39PM -0400, Jim Quinlan wrote:
> > v2:
> > Commit: "device core: Add ability to handle multiple dma offsets"
> >   o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
> >   o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
> >   o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
> >   o dev->dma_pfn_map => dev->dma_pfn_offset_map
> >   o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
> >   o In device.h: s/const void */const struct dma_pfn_offset_region */
> >   o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since
> >     guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
> >   o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now
> >     dev->dma_pfn_offset_map is copied as well.
> >   o Merged two of the DMA commits into one (Christoph).
> >
> > Commit "arm: dma-mapping: Invoke dma offset func if needed":
> >   o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET
> >
> > Other commits' changes:
> >   o Removed need for carrying of_id var in priv (Nicolas)
> >   o Commit message rewordings (Bjorn)
> >   o Commit log messages filled to 75 chars (Bjorn)
> >   o devm_reset_control_get_shared())
> >     => devm_reset_control_get_optional_shared (Philipp)
> >   o Add call to reset_control_assert() in PCIe remove routines (Philipp)
> >
> > v1:
> > This patchset expands the usefulness of the Broadcom Settop Box PCIe
> > controller by building upon the PCIe driver used currently by the
> > Raspbery Pi.  Other forms of this patchset were submitted by me years
> > ago and not accepted; the major sticking point was the code required
> > for the DMA remapping needed for the PCIe driver to work [1].
> >
> > There have been many changes to the DMA and OF subsystems since that
> > time, making a cleaner and less intrusive patchset possible.  This
> > patchset implements a generalization of "dev->dma_pfn_offset", except
> > that instead of a single scalar offset it provides for multiple
> > offsets via a function which depends upon the "dma-ranges" property of
> > the PCIe host controller.  This is required for proper functionality
> > of the BrcmSTB PCIe controller and possibly some other devices.
>
> If you can enable the h/w support without the multiple offset support,
> then I'd split up this series. The latter part might take a bit more
> time.
>
> Rob
Unfortunately, the STB PCIe  controller depends on the multiple PFN
offset functionality.
Thanks,
Jim

Re: [PATCH v2 01/14] PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB

[Rob Herring]

On Tue, 26 May 2020 15:12:40 -0400, Jim Quinlan wrote:
> From: Jim Quinlan <jquinlan@broadcom.com>
> 
> Have PCIE_BRCMSTB depend on ARCH_BRCMSTB.  Also set the default value to
> ARCH_BRCMSTB.
> 
> Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/pci/controller/Kconfig | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 03/14] dt-bindings: PCI: Add bindings for more Brcmstb chips

[Jim Quinlan]

On Fri, May 29, 2020 at 1:46 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, May 26, 2020 at 03:12:42PM -0400, Jim Quinlan wrote:
> > From: Jim Quinlan <jquinlan@broadcom.com>
> >
> > - Add compatible strings for three more Broadcom STB chips: 7278, 7216,
> >   7211 (STB version of RPi4).
> > - add new property 'brcm,scb-sizes'
> > - add new property 'resets'
> > - add new property 'reset-names'
> > - allow 'ranges' and 'dma-ranges' to have more than one item and update
> >   the example to show this.
> >
> > Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
> > ---
> >  .../bindings/pci/brcm,stb-pcie.yaml           | 40 +++++++++++++++++--
> >  1 file changed, 36 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > index 8680a0f86c5a..66a7df45983d 100644
> > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -14,7 +14,13 @@ allOf:
> >
> >  properties:
> >    compatible:
> > -    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> > +    items:
> > +      - enum:
>
> Don't need items here. Just change the const to enum.
>
> > +          - brcm,bcm2711-pcie # The Raspberry Pi 4
> > +          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
> > +          - brcm,bcm7278-pcie # Broadcom 7278 Arm
> > +          - brcm,bcm7216-pcie # Broadcom 7216 Arm
> > +          - brcm,bcm7445-pcie # Broadcom 7445 Arm
> >
> >    reg:
> >      maxItems: 1
> > @@ -34,10 +40,12 @@ properties:
> >        - const: msi
> >
> >    ranges:
> > -    maxItems: 1
> > +    minItems: 1
> > +    maxItems: 4
> >
> >    dma-ranges:
> > -    maxItems: 1
> > +    minItems: 1
> > +    maxItems: 6
> >
> >    clocks:
> >      maxItems: 1
> > @@ -58,8 +66,30 @@ properties:
> >
> >    aspm-no-l0s: true
> >
> > +  resets:
> > +    description: for "brcm,bcm7216-pcie", must be a valid reset
> > +      phandle pointing to the RESCAL reset controller provider node.
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > +
> > +  reset-names:
> > +    items:
> > +      - const: rescal
>
> These are going to need to be an if/then schema if they only apply to
> certain compatible(s).

Why is that -- the code is general enough to handle its presence or
not (it is an optional compatibility)>

>
>
> > +
> > +  brcm,scb-sizes:
> > +    description: (u32, u32) tuple giving the 64bit PCIe memory
> > +      viewport size of a memory controller.  There may be up to
> > +      three controllers, and each size must be a power of two
> > +      with a size greater or equal to the amount of memory the
> > +      controller supports.
>
> This sounds like what dma-ranges should express?

There is some overlap but this contains information that is not in the
dma-ranges.  Believe me I tried.

>
> If not, we do have 64-bit size if that what you need.

IIRC I tried the 64-bit size but the YAML validator did not like it;
it wanted numbers like  <0x1122334455667788> while dtc wanted <
0x11223344 0x55667788>.  I gave up trying and switched to u32.

Thanks,
Jim

>
>
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> > +      - items:
> > +          minItems: 2
> > +          maxItems: 6
> > +
> >  required:
> >    - reg
> > +  - ranges
> >    - dma-ranges
> >    - "#interrupt-cells"
> >    - interrupts
> > @@ -93,7 +123,9 @@ examples:
> >                      msi-parent = <&pcie0>;
> >                      msi-controller;
> >                      ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
> > -                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
> > +                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
> > +                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
> >                      brcm,enable-ssc;
> > +                    brcm,scb-sizes = <0x0 0x80000000 0x0 0x80000000>;
> >              };
> >      };
> > --
> > 2.17.1
> >

Re: [PATCH v2 03/14] dt-bindings: PCI: Add bindings for more Brcmstb chips

[Rob Herring]

On Tue, Jun 2, 2020 at 2:53 PM Jim Quinlan <james.quinlan@broadcom.com> wrote:
>
> On Fri, May 29, 2020 at 1:46 PM Rob Herring <robh@kernel.org> wrote:
> >
> > On Tue, May 26, 2020 at 03:12:42PM -0400, Jim Quinlan wrote:
> > > From: Jim Quinlan <jquinlan@broadcom.com>
> > >
> > > - Add compatible strings for three more Broadcom STB chips: 7278, 7216,
> > >   7211 (STB version of RPi4).
> > > - add new property 'brcm,scb-sizes'
> > > - add new property 'resets'
> > > - add new property 'reset-names'
> > > - allow 'ranges' and 'dma-ranges' to have more than one item and update
> > >   the example to show this.
> > >
> > > Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
> > > ---
> > >  .../bindings/pci/brcm,stb-pcie.yaml           | 40 +++++++++++++++++--
> > >  1 file changed, 36 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > > index 8680a0f86c5a..66a7df45983d 100644
> > > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > > @@ -14,7 +14,13 @@ allOf:
> > >
> > >  properties:
> > >    compatible:
> > > -    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> > > +    items:
> > > +      - enum:
> >
> > Don't need items here. Just change the const to enum.
> >
> > > +          - brcm,bcm2711-pcie # The Raspberry Pi 4
> > > +          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
> > > +          - brcm,bcm7278-pcie # Broadcom 7278 Arm
> > > +          - brcm,bcm7216-pcie # Broadcom 7216 Arm
> > > +          - brcm,bcm7445-pcie # Broadcom 7445 Arm
> > >
> > >    reg:
> > >      maxItems: 1
> > > @@ -34,10 +40,12 @@ properties:
> > >        - const: msi
> > >
> > >    ranges:
> > > -    maxItems: 1
> > > +    minItems: 1
> > > +    maxItems: 4
> > >
> > >    dma-ranges:
> > > -    maxItems: 1
> > > +    minItems: 1
> > > +    maxItems: 6
> > >
> > >    clocks:
> > >      maxItems: 1
> > > @@ -58,8 +66,30 @@ properties:
> > >
> > >    aspm-no-l0s: true
> > >
> > > +  resets:
> > > +    description: for "brcm,bcm7216-pcie", must be a valid reset
> > > +      phandle pointing to the RESCAL reset controller provider node.
> > > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > > +
> > > +  reset-names:
> > > +    items:
> > > +      - const: rescal
> >
> > These are going to need to be an if/then schema if they only apply to
> > certain compatible(s).
>
> Why is that -- the code is general enough to handle its presence or
> not (it is an optional compatibility)>

Because an if/then schema expresses in a parse-able form what your
'description' does in free form text.

Presumably a 'resets' property for !brcm,bcm7216-pcie is invalid, so
we should check that. The schema shouldn't be just what some driver
happens to currently allow. Also, it's not a driver's job to validate
DT, so it shouldn't check any of this.

> > > +  brcm,scb-sizes:
> > > +    description: (u32, u32) tuple giving the 64bit PCIe memory
> > > +      viewport size of a memory controller.  There may be up to
> > > +      three controllers, and each size must be a power of two
> > > +      with a size greater or equal to the amount of memory the
> > > +      controller supports.
> >
> > This sounds like what dma-ranges should express?
>
> There is some overlap but this contains information that is not in the
> dma-ranges.  Believe me I tried.

I don't understand. If you had 3 dma-ranges entries, you'd have 3
sizes. Can you expand or show me what you tried?

> > If not, we do have 64-bit size if that what you need.
>
> IIRC I tried the 64-bit size but the YAML validator did not like it;
> it wanted numbers like  <0x1122334455667788> while dtc wanted <
> 0x11223344 0x55667788>.  I gave up trying and switched to u32.

You used the /bits/ annotation for dtc?:

/bits/ 64 <0x1122334455667788>

I also made a recent fix to dt-schema around handling of 64-bit sizes,
so update if you have problems still.

Rob

Re: [PATCH v2 03/14] dt-bindings: PCI: Add bindings for more Brcmstb chips

[Jim Quinlan]

On Tue, Jun 2, 2020 at 5:41 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, Jun 2, 2020 at 2:53 PM Jim Quinlan <james.quinlan@broadcom.com> wrote:
> >
> > On Fri, May 29, 2020 at 1:46 PM Rob Herring <robh@kernel.org> wrote:
> > >
> > > On Tue, May 26, 2020 at 03:12:42PM -0400, Jim Quinlan wrote:
> > > > From: Jim Quinlan <jquinlan@broadcom.com>
> > > >
> > > > - Add compatible strings for three more Broadcom STB chips: 7278, 7216,
> > > >   7211 (STB version of RPi4).
> > > > - add new property 'brcm,scb-sizes'
> > > > - add new property 'resets'
> > > > - add new property 'reset-names'
> > > > - allow 'ranges' and 'dma-ranges' to have more than one item and update
> > > >   the example to show this.
> > > >
> > > > Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
> > > > ---
> > > >  .../bindings/pci/brcm,stb-pcie.yaml           | 40 +++++++++++++++++--
> > > >  1 file changed, 36 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > > > index 8680a0f86c5a..66a7df45983d 100644
> > > > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > > > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > > > @@ -14,7 +14,13 @@ allOf:
> > > >
> > > >  properties:
> > > >    compatible:
> > > > -    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> > > > +    items:
> > > > +      - enum:
> > >
> > > Don't need items here. Just change the const to enum.
> > >
> > > > +          - brcm,bcm2711-pcie # The Raspberry Pi 4
> > > > +          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
> > > > +          - brcm,bcm7278-pcie # Broadcom 7278 Arm
> > > > +          - brcm,bcm7216-pcie # Broadcom 7216 Arm
> > > > +          - brcm,bcm7445-pcie # Broadcom 7445 Arm
> > > >
> > > >    reg:
> > > >      maxItems: 1
> > > > @@ -34,10 +40,12 @@ properties:
> > > >        - const: msi
> > > >
> > > >    ranges:
> > > > -    maxItems: 1
> > > > +    minItems: 1
> > > > +    maxItems: 4
> > > >
> > > >    dma-ranges:
> > > > -    maxItems: 1
> > > > +    minItems: 1
> > > > +    maxItems: 6
> > > >
> > > >    clocks:
> > > >      maxItems: 1
> > > > @@ -58,8 +66,30 @@ properties:
> > > >
> > > >    aspm-no-l0s: true
> > > >
> > > > +  resets:
> > > > +    description: for "brcm,bcm7216-pcie", must be a valid reset
> > > > +      phandle pointing to the RESCAL reset controller provider node.
> > > > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > > > +
> > > > +  reset-names:
> > > > +    items:
> > > > +      - const: rescal
> > >
> > > These are going to need to be an if/then schema if they only apply to
> > > certain compatible(s).
> >
> > Why is that -- the code is general enough to handle its presence or
> > not (it is an optional compatibility)>
>
> Because an if/then schema expresses in a parse-able form what your
> 'description' does in free form text.
>
> Presumably a 'resets' property for !brcm,bcm7216-pcie is invalid, so
> we should check that. The schema shouldn't be just what some driver
> happens to currently allow. Also, it's not a driver's job to validate
> DT, so it shouldn't check any of this.
Got it, will fix.
>
> > > > +  brcm,scb-sizes:
> > > > +    description: (u32, u32) tuple giving the 64bit PCIe memory
> > > > +      viewport size of a memory controller.  There may be up to
> > > > +      three controllers, and each size must be a power of two
> > > > +      with a size greater or equal to the amount of memory the
> > > > +      controller supports.
> > >
> > > This sounds like what dma-ranges should express?
> >
> > There is some overlap but this contains information that is not in the
> > dma-ranges.  Believe me I tried.
>
> I don't understand. If you had 3 dma-ranges entries, you'd have 3
> sizes. Can you expand or show me what you tried?
Here is a simple example: suppose you have two dma-ranges.  This could
be from one of two cases:

- Both dma-ranges are from the same memory controller (the second
range is the "extended" region).
- One dma-range can be from memc0 and the other can be from memc1; the
extensions are not used.

The driver has to determine (a)  how many memory controllers there are
and (b) what the size should be for each of them.  It is impossible to
do this with the case above.

>
> > > If not, we do have 64-bit size if that what you need.
> >
> > IIRC I tried the 64-bit size but the YAML validator did not like it;
> > it wanted numbers like  <0x1122334455667788> while dtc wanted <
> > 0x11223344 0x55667788>.  I gave up trying and switched to u32.
>
> You used the /bits/ annotation for dtc?:
>
> /bits/ 64 <0x1122334455667788>
>
> I also made a recent fix to dt-schema around handling of 64-bit sizes,
> so update if you have problems still.
I didn't try the /bits/ so I'll pursue this.

Thanks,
Jim

>
> Rob