Re: [PATCH 1/3] dt-bindings: iommu: mediatek: add binding documentation for MT8365 SoC

[Macpaul Lin <macpaul.lin@mediatek.com>]

On 6/2/22 2:18 PM, Yong Wu wrote:
> On Mon, 2022-05-30 at 20:03 +0200, Fabien Parent wrote:
>> Add IOMMU binding documentation for the MT8365 SoC.
>>
>> Signed-off-by: Fabien Parent <fparent@baylibre.com>
>> ---
>>   .../bindings/iommu/mediatek,iommu.yaml        |  2 +
>>   include/dt-bindings/memory/mt8365-larb-port.h | 96
>> +++++++++++++++++++
>>   2 files changed, 98 insertions(+)
>>   create mode 100644 include/dt-bindings/memory/mt8365-larb-port.h
> 
> [snip...]
> 
>> +#ifndef _DT_BINDINGS_MEMORY_MT8365_LARB_PORT_H_
>> +#define _DT_BINDINGS_MEMORY_MT8365_LARB_PORT_H_
>> +
>> +#include <dt-bindings/memory/mtk-memory-port.h>
>> +
>> +#define M4U_LARB0_ID			0
>> +#define M4U_LARB1_ID			1
>> +#define M4U_LARB2_ID			2
>> +#define M4U_LARB3_ID			3
>> +#define M4U_LARB4_ID			4
>> +#define M4U_LARB5_ID			5
>> +#define M4U_LARB6_ID			6
>> +#define M4U_LARB7_ID			7
> 
> Remove these. they are no used, right?

AIOT and customers are using the modules and their related IOMMU modules.
DISP0, VENC, VDEC, ISP (CAMSYS), and APU (as far as I know, which should 
be VP6?) were all supported.

> 
>> +
>> +/* larb0 */
>> +#define M4U_PORT_DISP_OVL0		MTK_M4U_ID(0, 0)
>> +#define M4U_PORT_DISP_OVL0_2L	MTK_M4U_ID(0, 1)
> 
> [...]
> 
>>
>> +/* larb4 */
>> +#define M4U_PORT_APU_READ		MTK_M4U_ID(0, 0)
>> +#define M4U_PORT_APU_WRITE		MTK_M4U_ID(0, 1)
> 
> Please remove these two APU definitions. currently these are not
> supported.

Kidd, please help to check if APU use these definitions with Yong.
However, I think these are all available to the customers.

Thanks
Macpaul Lin