From: Wei Xu <xuwei5@hisilicon.com>
To: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>, <catalin.marinas@arm.com>,
<suzuki.poulose@arm.com>, <dave.martin@arm.com>,
<mark.rutland@arm.com>, <marc.zyngier@arm.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Linuxarm <linuxarm@huawei.com>,
Hanjun Guo <guohanjun@huawei.com>, <xiexiuqi@huawei.com>,
huangdaode <huangdaode@hisilicon.com>,
"Chenxin (Charles)" <charles.chenxin@huawei.com>,
"Xiongfanggou (James)" <james.xiong@huawei.com>,
"Liguozhu (Kenneth)" <liguozhu@hisilicon.com>,
Zhangyi ac <zhangyi.ac@huawei.com>, <jonathan.cameron@huawei.com>,
Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>,
John Garry <john.garry@huawei.com>,
Salil Mehta <salil.mehta@huawei.com>,
Shiju Jose <shiju.jose@huawei.com>,
"Zhuangyuzeng (Yisen)" <yisen.zhuang@huawei.com>,
"Wangzhou (B)" <wangzhou1@hisilicon.com>,
"kongxinwei (A)" <kong.kongxinwei@hisilicon.com>,
"Liyuan (Larry, Turing Solution)" <Larry.T@huawei.com>,
<libeijian@hisilicon.com>, <zhangbin011@hisilicon.com>
Subject: Re: KVM guest sometimes failed to boot because of kernel stack overflow if KPTI is enabled on a hisilicon ARM64 platform.
Date: Fri, 22 Jun 2018 21:46:53 +0800 [thread overview]
Message-ID: <5B2CFDCD.6040207@hisilicon.com> (raw)
In-Reply-To: <20180622133133.GA1802@arm.com>
Hi Will,
On 2018/6/22 21:31, Will Deacon wrote:
> Hi again, Wei,
>
> On Fri, Jun 22, 2018 at 09:18:27PM +0800, Wei Xu wrote:
>> On 2018/6/22 19:16, Will Deacon wrote:
>>> On Fri, Jun 22, 2018 at 06:45:15PM +0800, Wei Xu wrote:
>>>> On 2018/6/22 17:23, Will Deacon wrote:
>>>>> Perhaps just writing back the table entries is enough to cause the issue,
>>>>> although I really can't understand why that would be the case. Can you try
>>>>> the diff below (without my previous change), please?
>>>> Thanks!
>>>> But it does not resolve the issue(only apply this patch based on 4.17.0).
>>> Thanks, that's a useful data point. It means that it still crashes even if
>>> we write back the same table entries, so it's the fact that we're writing
>>> them at all which causes the problem, not the value that we write.
>>>
>>> Whilst looking at the code, we noticed a missing DMB. On the off-chance
>>> that it helps, can you try this instead please?
>> Thanks!
>> Only apply below patch based on 4.17.0, we still got the crash.
> Oh well, it was worth a shot (and that's still a fix worth having). Please
> can you provide the complete disassembly for kpti_install_ng_mappings()
> (I'm referring to the C function in cpufeature.c) along with a corresponding
> crash log so that we can correlate the instruction stream with the crash?
Just let me know if you need more information.
Thanks!
The disassemble code is as below:
Dump of assembler code for function kpti_install_ng_mappings:
0xffff000008091d68 <+0>: stp x29, x30, [sp,#-112]!
0xffff000008091d6c <+4>: adrp x0, 0xffff000009022000
<bp_hardening_data>
0xffff000008091d70 <+8>: mov x29, sp
0xffff000008091d74 <+12>: stp x23, x24, [sp,#48]
0xffff000008091d78 <+16>: adrp x24, 0xffff000009191000
<reset_devices>
0xffff000008091d7c <+20>: add x0, x0, #0x10
0xffff000008091d80 <+24>: add x1, x24, #0x550
0xffff000008091d84 <+28>: stp x19, x20, [sp,#16]
0xffff000008091d88 <+32>: stp x21, x22, [sp,#32]
0xffff000008091d8c <+36>: stp x25, x26, [sp,#64]
0xffff000008091d90 <+40>: stp x27, x28, [sp,#80]
0xffff000008091d94 <+44>: mrs x2, tpidr_el1
0xffff000008091d98 <+48>: ldrb w1, [x1,#8]
0xffff000008091d9c <+52>: ldr w20, [x2,x0]
0xffff000008091da0 <+56>: cbnz w1, 0xffff000008091f18
<kpti_install_ng_mappings+432>
0xffff000008091da4 <+60>: adrp x27, 0xffff000008ea9000
<cpu_ops+384>
0xffff000008091da8 <+64>: adrp x19, 0xffff000009190000
<empty_zero_page>
0xffff000008091dac <+68>: add x19, x19, #0x0
0xffff000008091db0 <+72>: adrp x1, 0xffff000008a44000
<kimage_vaddr>
0xffff000008091db4 <+76>: mov x0, x19
0xffff000008091db8 <+80>: add x1, x1, #0x3d8
0xffff000008091dbc <+84>: ldr x2, [x27,#672]
0xffff000008091dc0 <+88>: sub x4, x1, x2
0xffff000008091dc4 <+92>: sub x0, x0, x2
0xffff000008091dc8 <+96>: msr ttbr0_el1, x0
0xffff000008091dcc <+100>: isb
0xffff000008091dd0 <+104>: dsb nshst
0xffff000008091dd4 <+108>: tlbi vmalle1
0xffff000008091dd8 <+112>: nop
0xffff000008091ddc <+116>: nop
0xffff000008091de0 <+120>: dsb nsh
0xffff000008091de4 <+124>: isb
0xffff000008091de8 <+128>: adrp x3, 0xffff000009056000
<armv8_event_attr_sw_incr+8>
0xffff000008091dec <+132>: ldr x0, [x3,#2248]
0xffff000008091df0 <+136>: cmp x0, #0x10
0xffff000008091df4 <+140>: b.ne 0xffff000008091f64
<kpti_install_ng_mappings+508>
0xffff000008091df8 <+144>: adrp x28, 0xffff000008ea9000
<cpu_ops+384>
0xffff000008091dfc <+148>: ldr x2, [x27,#672]
0xffff000008091e00 <+152>: adrp x1, 0xffff0000091f3000
0xffff000008091e04 <+156>: adrp x26, 0xffff0000091f7000
0xffff000008091e08 <+160>: add x1, x1, #0x0
0xffff000008091e0c <+164>: add x21, x26, #0x0
0xffff000008091e10 <+168>: ldr x0, [x28,#656]
0xffff000008091e14 <+172>: adrp x23, 0xffff000008ea9000
<cpu_ops+384>
0xffff000008091e18 <+176>: sub x1, x1, x2
0xffff000008091e1c <+180>: sub x1, x1, x0
0xffff000008091e20 <+184>: orr x0, x1, #0xffff800000000000
0xffff000008091e24 <+188>: cmp x0, x21
0xffff000008091e28 <+192>: b.eq 0xffff000008091f60
<kpti_install_ng_mappings+504>
0xffff000008091e2c <+196>: mov x22, x19
0xffff000008091e30 <+200>: str x3, [x29,#96]
0xffff000008091e34 <+204>: str x4, [x29,#104]
0xffff000008091e38 <+208>: sub x2, x22, x2
0xffff000008091e3c <+212>: msr ttbr0_el1, x2
0xffff000008091e40 <+216>: isb
0xffff000008091e44 <+220>: ldr x0, [x28,#656]
0xffff000008091e48 <+224>: and x1, x1, #0x7fffffffffff
0xffff000008091e4c <+228>: adrp x25, 0xffff00000906d000
<shmem_swaplist_mutex+16>
0xffff000008091e50 <+232>: add x0, x1, x0
0xffff000008091e54 <+236>: add x1, x25, #0x7b0
0xffff000008091e58 <+240>: bl 0xffff0000080a021c
<cpu_do_switch_mm>
0xffff000008091e5c <+244>: adrp x0, 0xffff00000904a000
<__cpu_online_mask>
0xffff000008091e60 <+248>: mov w1,
#0x80 // #128
0xffff000008091e64 <+252>: add x0, x0, #0x0
0xffff000008091e68 <+256>: bl 0xffff0000083e22f0
<__bitmap_weight>
0xffff000008091e6c <+260>: mov w1, w0
0xffff000008091e70 <+264>: ldr x5, [x23,#672]
0xffff000008091e74 <+268>: mov w0, w20
0xffff000008091e78 <+272>: ldr x4, [x29,#104]
0xffff000008091e7c <+276>: mov x2, x21
0xffff000008091e80 <+280>: sub x2, x2, x5
0xffff000008091e84 <+284>: blr x4
0xffff000008091e88 <+288>: ldr x1, [x23,#672]
0xffff000008091e8c <+292>: mrs x0, sp_el0
0xffff000008091e90 <+296>: sub x22, x22, x1
0xffff000008091e94 <+300>: ldr x1, [x0,#1128]
0xffff000008091e98 <+304>: msr ttbr0_el1, x22
0xffff000008091e9c <+308>: isb
0xffff000008091ea0 <+312>: dsb nshst
0xffff000008091ea4 <+316>: tlbi vmalle1
0xffff000008091ea8 <+320>: nop
0xffff000008091eac <+324>: nop
0xffff000008091eb0 <+328>: dsb nsh
0xffff000008091eb4 <+332>: isb
0xffff000008091eb8 <+336>: ldr x3, [x29,#96]
0xffff000008091ebc <+340>: ldr x0, [x3,#2248]
0xffff000008091ec0 <+344>: cmp x0, #0x10
0xffff000008091ec4 <+348>: b.ne 0xffff000008091f48
<kpti_install_ng_mappings+480>
0xffff000008091ec8 <+352>: add x25, x25, #0x7b0
0xffff000008091ecc <+356>: cmp x1, x25
0xffff000008091ed0 <+360>: b.eq 0xffff000008091f08
<kpti_install_ng_mappings+416>
0xffff000008091ed4 <+364>: ldr x2, [x1,#64]
0xffff000008091ed8 <+368>: add x26, x26, #0x0
0xffff000008091edc <+372>: cmp x2, x26
0xffff000008091ee0 <+376>: b.eq 0xffff000008091f60
<kpti_install_ng_mappings+504>
0xffff000008091ee4 <+380>: ldr x0, [x27,#672]
0xffff000008091ee8 <+384>: sub x19, x19, x0
0xffff000008091eec <+388>: msr ttbr0_el1, x19
0xffff000008091ef0 <+392>: isb
0xffff000008091ef4 <+396>: tbz x2, #47, 0xffff000008091f34
<kpti_install_ng_mappings+460>
0xffff000008091ef8 <+400>: ldr x0, [x28,#656]
0xffff000008091efc <+404>: and x2, x2, #0x7fffffffffff
0xffff000008091f00 <+408>: add x0, x2, x0
0xffff000008091f04 <+412>: bl 0xffff0000080a021c
<cpu_do_switch_mm>
0xffff000008091f08 <+416>: cbnz w20, 0xffff000008091f18
<kpti_install_ng_mappings+432>
0xffff000008091f0c <+420>: add x24, x24, #0x550
0xffff000008091f10 <+424>: mov w0,
#0x1 // #1
0xffff000008091f14 <+428>: strb w0, [x24,#8]
0xffff000008091f18 <+432>: ldp x19, x20, [sp,#16]
0xffff000008091f1c <+436>: ldp x21, x22, [sp,#32]
0xffff000008091f20 <+440>: ldp x23, x24, [sp,#48]
0xffff000008091f24 <+444>: ldp x25, x26, [sp,#64]
0xffff000008091f28 <+448>: ldp x27, x28, [sp,#80]
0xffff000008091f2c <+452>: ldp x29, x30, [sp],#112
0xffff000008091f30 <+456>: ret
0xffff000008091f34 <+460>: adrp x0, 0xffff000008ea9000
<cpu_ops+384>
0xffff000008091f38 <+464>: ldr x0, [x0,#672]
0xffff000008091f3c <+468>: sub x0, x2, x0
0xffff000008091f40 <+472>: bl 0xffff0000080a021c
<cpu_do_switch_mm>
0xffff000008091f44 <+476>: b 0xffff000008091f08
<kpti_install_ng_mappings+416>
0xffff000008091f48 <+480>: mrs x0, tcr_el1
0xffff000008091f4c <+484>: and x0, x0, #0xffffffffffffffc0
0xffff000008091f50 <+488>: orr x0, x0, #0x10
0xffff000008091f54 <+492>: msr tcr_el1, x0
0xffff000008091f58 <+496>: isb
0xffff000008091f5c <+500>: b 0xffff000008091ec8
<kpti_install_ng_mappings+352>
0xffff000008091f60 <+504>: brk #0x800
0xffff000008091f64 <+508>: mrs x1, tcr_el1
0xffff000008091f68 <+512>: and x1, x1, #0xffffffffffffffc0
0xffff000008091f6c <+516>: orr x0, x1, x0
0xffff000008091f70 <+520>: msr tcr_el1, x0
0xffff000008091f74 <+524>: isb
0xffff000008091f78 <+528>: b 0xffff000008091df8
<kpti_install_ng_mappings+144>
End of assembler dump.
The crash log for it is as :
estuary:/$ ./qemu-system-aarch64 -machine
virt,kernel_irqchip=on,gic-version=3
-cpu host -enable-kvm -smp 1 -m 1024 -kernel ./Image-4.17-joyx
-initrd
../mini-rootfs-arm64.cpio.gz -nographic -append "rdinit=init
console=ttyAMA0 earlycon=pl011,0x9000000"
[ 0.000000] Booting Linux on physical CPU 0x0000000000
[0x480fd010]
[ 0.000000] Linux version 4.17.0-45864-g29dcea8-dirty
(joyx@Turing-Arch-b) (gcc version 4.9.1 20140505 (prerelease)
(crosstool-NG linaro-1.13.1-4.9-2014.05 - Linaro GCC 4.9-2014.05)) #16
SMP PREEMPT Fri Jun 22 21:05:10 CST 2018
[ 0.000000] Machine model: linux,dummy-virt
[ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000
(options '')
[ 0.000000] bootconsole [pl11] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000000000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7efeb300-0x7efecdff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem
0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem
0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: get_random_bytes called from
start_kernel+0xa8/0x418 with crng_init=0
[ 0.000000] percpu: Embedded 24 pages/cpu @ (ptrval) s57984
r8192 d32128 u98304
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Kernel page table
isolation (KPTI)
[ 0.000000] CPU features: detected: Hardware dirty bit
management
[ 0.000000] Built 1 zonelists, mobility grouping on. Total
pages: 258048
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: rdinit=init console=ttyAMA0
earlycon=pl011,0x9000000
[ 0.000000] Memory: 968436K/1048576K available (10044K
kernel code, 1328K rwdata, 4840K rodata, 1216K init, 409K bss, 63756K
reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to
nr_cpu_ids=1.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=1
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] ITS [mem 0x08080000-0x0809ffff]
[ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices
@7d830000 (indirect, esz 8, psz 64K, shr 1)
[ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt
Collections @7d840000 (flat, esz 8, psz 64K, shr 1)
[ 0.000000] GIC: using LPI property table @0x000000007d850000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region
0:0x00000000080a0000
[ 0.000000] CPU0: using LPI pending table @0x000000007d860000
[ 0.000000] GIC: PPI11 is secure or misconfigured
[ 0.000000] arch_timer: WARNING: Invalid trigger for IRQ3,
assuming level low
[ 0.000000] arch_timer: WARNING: Please fix your firmware
[ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz
(virt).
[ 0.000000] clocksource: arch_sys_counter: mask:
0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
[ 0.000001] sched_clock: 56 bits at 100MHz, resolution 10ns,
wraps every 4398046511100ns
[ 0.000849] Console: colour dummy device 80x25
[ 0.001427] Calibrating delay loop (skipped), value
calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000)
[ 0.002485] pid_max: default: 32768 minimum: 301
[ 0.002966] Security Framework initialized
[ 0.003549] Dentry cache hash table entries: 131072 (order:
8, 1048576 bytes)
[ 0.004353] Inode-cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.005068] Mount-cache hash table entries: 2048 (order: 2,
16384 bytes)
[ 0.005858] Mountpoint-cache hash table entries: 2048
(order: 2, 16384 bytes)
[ 0.025962] ASID allocator initialised with 32768 entries
[ 0.029972] Hierarchical SRCU implementation.
[ 0.034341] Platform MSI: its domain created
[ 0.034793] PCI/MSI: /intc/its domain created
[ 0.035360] EFI services will not be available.
[ 0.038002] smp: Bringing up secondary CPUs ...
[ 0.038472] smp: Brought up 1 node, 1 CPU
[ 0.038878] SMP: Total of 1 processors activated.
[ 0.039354] CPU features: detected: GIC system register CPU
interface
[ 0.040004] CPU features: detected: Privileged Access Never
[ 0.040566] CPU features: detected: User Access Override
[ 0.042462] Insufficient stack space to handle exception!
[ 0.042464] ESR: 0x96000046 -- DABT (current EL)
[ 0.043781] FAR: 0xffff0000093a80e0
[ 0.044239] Task stack: [0xffff0000093a8000..0xffff0000093ac000]
[ 0.046967] IRQ stack: [0xffff000008000000..0xffff000008004000]
[ 0.053361] Overflow stack:
[0xffff80003efce2f0..0xffff80003efcf2f0]
[ 0.059754] CPU: 0 PID: 12 Comm: migration/0 Not tainted
4.17.0-45864-g29dcea8-dirty #16
[ 0.067946] Hardware name: linux,dummy-virt (DT)
[ 0.072644] pstate: 604003c5 (nZCv DAIF +PAN -UAO)
[ 0.077480] pc : el1_sync+0x0/0xb0
[ 0.080970] lr : kpti_install_ng_mappings+0x120/0x214
[ 0.086143] sp : ffff0000093a80e0
[ 0.089513] x29: ffff0000093abce0 x28: ffff000008ea9000
[ 0.094929] x27: ffff000008ea9000 x26: ffff0000091f7000
[ 0.100241] x25: ffff00000906d000 x24: ffff000009191000
[ 0.105657] x23: ffff000008ea9000 x22: 0000000041190000
[ 0.111448] x21: ffff0000091f7000 x20: 0000000000000000
[ 0.116437] x19: ffff000009190000 x18: 000000003455d99d
[ 0.121739] x17: 0000000000000001 x16: 00f8000040ffff13
[ 0.127155] x15: 000000007eff6000 x14: 000000007eff6000
[ 0.132576] x13: 00f800007fe00f11 x12: 000000007eff8000
[ 0.137886] x11: 000000007eff8000 x10: 0000000000000000
[ 0.143300] x9 : 000000007eff9000 x8 : 000000007eff9000
[ 0.148717] x7 : 0000000000000000 x6 : 00000000411f8000
[ 0.154028] x5 : 00000000411f8000 x4 : 0000000040a443d4
[ 0.159444] x3 : 00000000411f7000 x2 : 00000000411f7000
[ 0.164862] x1 : ffff00000906d7b0 x0 : ffff80003da61c00
[ 0.170179] Kernel panic - not syncing: kernel stack overflow
[ 0.176069] CPU: 0 PID: 12 Comm: migration/0 Not tainted
4.17.0-45864-g29dcea8-dirty #16
[ 0.184152] Hardware name: linux,dummy-virt (DT)
[ 0.188851] Call trace:
[ 0.191380] dump_backtrace+0x0/0x180
[ 0.195113] show_stack+0x14/0x1c
[ 0.198488] dump_stack+0x90/0xb0
[ 0.201862] panic+0x138/0x2a0
[ 0.204989] __stack_chk_fail+0x0/0x18
[ 0.208836] handle_bad_stack+0x118/0x124
[ 0.212927] __bad_stack+0x88/0x8c
[ 0.216414] el1_sync+0x0/0xb0
[ 0.219544] Unable to handle kernel paging request at
virtual address ffff0000093abce0
[ 0.227507] Mem abort info:
[ 0.230390] ESR = 0x96000006
[ 0.233517] Exception class = DABT (current EL), IL = 32 bits
[ 0.239428] SET = 0, FnV = 0
[ 0.242555] EA = 0, S1PTW = 0
[ 0.245797] Data abort info:
[ 0.248795] ISV = 0, ISS = 0x00000006
[ 0.252652] CM = 0, WnR = 0
[ 0.255769] swapper pgtable: 4k pages, 48-bit VAs, pgdp
= (ptrval)
[ 0.262645] [ffff0000093abce0] pgd=00000000411f8803,
pud=00000000411f9803, pmd=0000000000000000
[ 0.271438] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 0.277098] Modules linked in:
[ 0.280227] CPU: 0 PID: 12 Comm: migration/0 Not tainted
4.17.0-45864-g29dcea8-dirty #16
[ 0.288310] Hardware name: linux,dummy-virt (DT)
[ 0.293004] pstate: 204003c5 (nzCv DAIF +PAN -UAO)
[ 0.297931] pc : unwind_frame+0x28/0xc8
[ 0.301792] lr : dump_backtrace+0x12c/0x180
[ 0.306114] sp : ffff80003efcf000
[ 0.309483] x29: ffff80003efcf000 x28: ffff80003da61c00
[ 0.314798] x27: ffff000008ea9000 x26: ffff0000091f7000
[ 0.320216] x25: ffff00000906d000 x24: ffff0000093a80e0
[ 0.325527] x23: 0000000000000000 x22: ffff000008dbada8
[ 0.330941] x21: 0000000000000000 x20: ffff000009049000
[ 0.336355] x19: ffff80003da61c00 x18: 000000003455d99d
[ 0.341770] x17: 0000000000000001 x16: 00f8000040ffff13
[ 0.347078] x15: 000000007eff6000 x14: 642d386165636439
[ 0.352491] x13: 0000000000000000 x12: cc26f77952f87e00
[ 0.357905] x11: ffffffffffffffff x10: 0000000000000075
[ 0.363214] x9 : ffff0000085ae9e8 x8 : ffff80003efcec90
[ 0.368628] x7 : 0000000000000000 x6 : ffff0000091befe1
[ 0.374053] x5 : 0000000000000000 x4 : ffff0000093ac000
[ 0.379363] x3 : ffff0000093a8000 x2 : ffff0000093abce0
[ 0.384779] x1 : ffff80003efcf048 x0 : ffff80003da61c00
[ 0.390196] Process migration/0 (pid: 12, stack limit =
0x (ptrval))
[ 0.397188] Call trace:
[ 0.399712] unwind_frame+0x28/0xc8
[ 0.403316] show_stack+0x14/0x1c
[ 0.406689] dump_stack+0x90/0xb0
[ 0.410065] panic+0x138/0x2a0
[ 0.413193] __stack_chk_fail+0x0/0x18
[ 0.416934] handle_bad_stack+0x118/0x124
[ 0.421025] __bad_stack+0x88/0x8c
[ 0.424513] el1_sync+0x0/0xb0
[ 0.427643] Unable to handle kernel paging request at
virtual address ffff0000093abce0
[ 0.435604] Mem abort info:
[ 0.438488] ESR = 0x96000006
[ 0.441615] Exception class = DABT (current EL), IL = 32 bits
[ 0.447635] SET = 0, FnV = 0
[ 0.450759] EA = 0, S1PTW = 0
[ 0.454002] Data abort info:
[ 0.456896] ISV = 0, ISS = 0x00000006
[ 0.460863] CM = 0, WnR = 0
[ 0.463874] swapper pgtable: 4k pages, 48-bit VAs, pgdp
= (ptrval)
[ 0.470750] [ffff0000093abce0] pgd=00000000411f8803,
pud=00000000411f9803, pmd=0000000000000000
Best Regards,
Wei
> Thanks,
>
> Will
>
> .
>
next prev parent reply other threads:[~2018-06-22 13:47 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 14:18 KVM guest sometimes failed to boot because of kernel stack overflow if KPTI is enabled on a hisilicon ARM64 platform Wei Xu
2018-06-20 14:42 ` Will Deacon
2018-06-20 15:52 ` Wei Xu
2018-06-20 15:54 ` James Morse
2018-06-20 16:25 ` Wei Xu
2018-06-20 16:28 ` Will Deacon
2018-06-20 16:33 ` Wei Xu
2018-06-21 8:38 ` James Morse
2018-06-21 9:00 ` Marc Zyngier
2018-06-21 9:18 ` Will Deacon
2018-06-21 10:14 ` Wei Xu
2018-06-21 10:54 ` Will Deacon
2018-06-22 8:33 ` Wei Xu
2018-06-22 9:23 ` Will Deacon
2018-06-22 10:45 ` Wei Xu
2018-06-22 11:16 ` Will Deacon
2018-06-22 13:18 ` Wei Xu
2018-06-22 13:31 ` Will Deacon
2018-06-22 13:46 ` Wei Xu [this message]
2018-06-22 14:43 ` Will Deacon
2018-06-22 15:26 ` Wei Xu
2018-06-22 14:28 ` Mark Rutland
2018-06-22 15:28 ` Wei Xu
2018-06-22 15:41 ` Will Deacon
2018-06-22 16:02 ` Wei Xu
2018-06-21 9:20 ` Wei Xu
2018-06-26 17:16 ` Wei Xu
2018-06-26 17:47 ` Will Deacon
2018-06-27 8:39 ` James Morse
2018-06-27 13:26 ` Wei Xu
2018-06-28 8:45 ` James Morse
2018-06-28 10:20 ` Wei Xu
2018-06-27 13:22 ` Wei Xu
2018-06-27 13:28 ` Will Deacon
2018-06-27 13:32 ` Wei Xu
2018-06-28 14:50 ` Wei Xu
2018-06-28 15:34 ` Mark Rutland
[not found] ` <etPan.5b3507f7.914aa16.1d6b@localhost>
2018-06-28 16:24 ` 答复: " Mark Rutland
2018-06-29 9:59 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5B2CFDCD.6040207@hisilicon.com \
--to=xuwei5@hisilicon.com \
--cc=Larry.T@huawei.com \
--cc=catalin.marinas@arm.com \
--cc=charles.chenxin@huawei.com \
--cc=dave.martin@arm.com \
--cc=guohanjun@huawei.com \
--cc=huangdaode@hisilicon.com \
--cc=james.morse@arm.com \
--cc=james.xiong@huawei.com \
--cc=john.garry@huawei.com \
--cc=jonathan.cameron@huawei.com \
--cc=kong.kongxinwei@hisilicon.com \
--cc=libeijian@hisilicon.com \
--cc=liguozhu@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=salil.mehta@huawei.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=shiju.jose@huawei.com \
--cc=suzuki.poulose@arm.com \
--cc=wangzhou1@hisilicon.com \
--cc=will.deacon@arm.com \
--cc=xiexiuqi@huawei.com \
--cc=yisen.zhuang@huawei.com \
--cc=zhangbin011@hisilicon.com \
--cc=zhangyi.ac@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).