linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Winkler, Tomas" <tomas.winkler@intel.com>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
	Peter Huewe <peterhuewe@gmx.de>
Cc: "linux-security-module@vger.kernel.org" 
	<linux-security-module@vger.kernel.org>,
	"moderated list:TPM DEVICE DRIVER" 
	<tpmdd-devel@lists.sourceforge.net>,
	open list <linux-kernel@vger.kernel.org>
Subject: RE: [tpmdd-devel] [PATCH v2 1/3] tpm_crb: map locality registers
Date: Mon, 5 Dec 2016 12:07:51 +0000	[thread overview]
Message-ID: <5B8DA87D05A7694D9FA63FD143655C1B54336B91@hasmsx108.ger.corp.intel.com> (raw)
In-Reply-To: <20161203184109.u6zok4f4ssbleht4@intel.com>

> > ---
> >  drivers/char/tpm/tpm_crb.c | 96
> > ++++++++++++++++++++++++++++++----------------
> >  1 file changed, 64 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> > index 717b6b4..8d81b66 100644
> > --- a/drivers/char/tpm/tpm_crb.c
> > +++ b/drivers/char/tpm/tpm_crb.c
> > @@ -52,18 +52,28 @@ enum crb_cancel {
> >  	CRB_CANCEL_INVOKE	= BIT(0),
> >  };
> >
> > -struct crb_control_area {
> > -	u32 req;
> > -	u32 sts;
> > -	u32 cancel;
> > -	u32 start;
> > -	u32 int_enable;
> > -	u32 int_sts;
> > -	u32 cmd_size;
> > -	u32 cmd_pa_low;
> > -	u32 cmd_pa_high;
> > -	u32 rsp_size;
> > -	u64 rsp_pa;
> > +struct crb_regs_head {
> > +	u32 loc_state;
> > +	u32 reserved1;
> > +	u32 loc_ctrl;
> > +	u32 loc_sts;
> > +	u8 reserved2[32];
> > +	u64 intf_id;
> > +	u64 ctrl_ext;
> > +} __packed;
> > +
> > +struct crb_regs_tail {
> > +	u32 ctrl_req;
> > +	u32 ctrl_sts;
> > +	u32 ctrl_cancel;
> > +	u32 ctrl_start;
> > +	u32 ctrl_int_enable;
> > +	u32 ctrl_int_sts;
> > +	u32 ctrl_cmd_size;
> > +	u32 ctrl_cmd_pa_low;
> > +	u32 ctrl_cmd_pa_high;
> > +	u32 ctrl_rsp_size;
> > +	u64 ctrl_rsp_pa;
> >  } __packed;


Now I wonder if using  traditional offsets wouldn't be cleaner solution.

> >  enum crb_status {
> > @@ -78,7 +88,8 @@ enum crb_flags {
> >  struct crb_priv {
> >  	unsigned int flags;
> >  	void __iomem *iobase;
> > -	struct crb_control_area __iomem *cca;
> > +	struct crb_regs_head __iomem *regs_h;
> > +	struct crb_regs_tail __iomem *regs_t;
Why just not leaving it cca, it's descriptive enough. 
> >  	u8 __iomem *cmd;
> >  	u8 __iomem *rsp;
> >  	u32 cmd_size;
> > @@ -104,7 +115,7 @@ static int __maybe_unused crb_go_idle(struct device
> *dev, struct crb_priv *priv)
> >  	if (priv->flags & CRB_FL_ACPI_START)
> >  		return 0;
> >
> > -	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req);
> > +	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
> >  	/* we don't really care when this settles */
> >
> >  	return 0;
> > @@ -128,21 +139,23 @@ static int __maybe_unused crb_cmd_ready(struct
> device *dev,
> >  					struct crb_priv *priv)
> >  {
> >  	ktime_t stop, start;
> > +	u32 req;
> >
> >  	if (priv->flags & CRB_FL_ACPI_START)
> >  		return 0;
> >
> > -	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req);
> > +	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
> >
> >  	start = ktime_get();
> >  	stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
> >  	do {
> > -		if (!(ioread32(&priv->cca->req) &
> CRB_CTRL_REQ_CMD_READY))
> > +		req = ioread32(&priv->regs_t->ctrl_req);
> > +		if (!(req & CRB_CTRL_REQ_CMD_READY))
> >  			return 0;
> >  		usleep_range(50, 100);
> >  	} while (ktime_before(ktime_get(), stop));
> >
> > -	if (ioread32(&priv->cca->req) & CRB_CTRL_REQ_CMD_READY) {
> > +	if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY)
> {
> >  		dev_warn(dev, "cmdReady timed out\n");
> >  		return -ETIME;
> >  	}
> > @@ -155,7 +168,7 @@ static u8 crb_status(struct tpm_chip *chip)
> >  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> >  	u8 sts = 0;
> >
> > -	if ((ioread32(&priv->cca->start) & CRB_START_INVOKE) !=
> > +	if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) !=
> >  	    CRB_START_INVOKE)
> >  		sts |= CRB_DRV_STS_COMPLETE;
> >
> > @@ -171,7 +184,7 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf,
> size_t count)
> >  	if (count < 6)
> >  		return -EIO;
> >
> > -	if (ioread32(&priv->cca->sts) & CRB_CTRL_STS_ERROR)
> > +	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
> >  		return -EIO;
> >
> >  	memcpy_fromio(buf, priv->rsp, 6);
> > @@ -210,7 +223,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> size_t len)
> >  	/* Zero the cancel register so that the next command will not get
> >  	 * canceled.
> >  	 */
> > -	iowrite32(0, &priv->cca->cancel);
> > +	iowrite32(0, &priv->regs_t->ctrl_cancel);
> >
> >  	if (len > priv->cmd_size) {
> >  		dev_err(&chip->dev, "invalid command count value %zd %d\n",
> @@
> > -224,7 +237,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t
> len)
> >  	wmb();
> >
> >  	if (priv->flags & CRB_FL_CRB_START)
> > -		iowrite32(CRB_START_INVOKE, &priv->cca->start);
> > +		iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
> >
> >  	if (priv->flags & CRB_FL_ACPI_START)
> >  		rc = crb_do_acpi_start(chip);
> > @@ -236,7 +249,7 @@ static void crb_cancel(struct tpm_chip *chip)  {
> >  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> >
> > -	iowrite32(CRB_CANCEL_INVOKE, &priv->cca->cancel);
> > +	iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
> >
> >  	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
> >  		dev_err(&chip->dev, "ACPI Start failed\n"); @@ -245,7 +258,7
> @@
> > static void crb_cancel(struct tpm_chip *chip)  static bool
> > crb_req_canceled(struct tpm_chip *chip, u8 status)  {
> >  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> > -	u32 cancel = ioread32(&priv->cca->cancel);
> > +	u32 cancel = ioread32(&priv->regs_t->ctrl_cancel);
> >
> >  	return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;  }
> @@
> > -287,6 +300,8 @@ static void __iomem *crb_map_res(struct device *dev,
> struct crb_priv *priv,
> >  	if (start != new_res.start)
> >  		return (void __iomem *) ERR_PTR(-EINVAL);
> >
> > +	dev_dbg(dev, "%pr %pr", io_res, &new_res);
> > +
> >  	if (!resource_contains(io_res, &new_res))
> >  		return devm_ioremap_resource(dev, &new_res);
> >
> > @@ -322,10 +337,27 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
> >  	if (IS_ERR(priv->iobase))
> >  		return PTR_ERR(priv->iobase);
> >
> > -	priv->cca = crb_map_res(dev, priv, &io_res, buf->control_address,
> > -				sizeof(struct crb_control_area));
> > -	if (IS_ERR(priv->cca))
> > -		return PTR_ERR(priv->cca);
> > +	/* The ACPI IO region starts at the head area and continues to include
> > +	 * the control area, as one nice sane region except for some older
> > +	 * stuff that puts the control area outside the ACPI IO region.
> > +	 */

This is not by the spec, can you be more specific, what platforms has that behavior?

> > +	if (!(priv->flags & CRB_FL_ACPI_START)) {
> > +		if (buf->control_address == io_res.start +
> > +		    sizeof(struct crb_regs_head)) {
> > +			priv->regs_h = crb_map_res(
Why do you need to map this again it just same as iobase ? 
> > +				dev, priv, &io_res, io_res.start,
> > +				sizeof(struct crb_regs_head));
> > +			if (IS_ERR(priv->regs_h))
> > +				return PTR_ERR(priv->regs_h);
> > +		} else {
> > +			dev_warn(dev, FW_BUG "Bad ACPI memory layout");
> > +		}
> > +	}
> > +
> > +	priv->regs_t = crb_map_res(dev, priv, &io_res, buf->control_address,
> > +				   sizeof(struct crb_regs_tail));

> > +	if (IS_ERR(priv->regs_t))
> > +		return PTR_ERR(priv->regs_t);
> >
> >  	/*
> >  	 * PTT HW bug w/a: wake up the device to access @@ -335,10 +367,10
> > @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
> >  	if (ret)
> >  		return ret;
> >
> > -	pa_high = ioread32(&priv->cca->cmd_pa_high);
> > -	pa_low  = ioread32(&priv->cca->cmd_pa_low);
> > +	pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high);
> > +	pa_low  = ioread32(&priv->regs_t->ctrl_cmd_pa_low);
> >  	cmd_pa = ((u64)pa_high << 32) | pa_low;
> > -	cmd_size = ioread32(&priv->cca->cmd_size);
> > +	cmd_size = ioread32(&priv->regs_t->ctrl_cmd_size);
> >
> >  	dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
> >  		pa_high, pa_low, cmd_size);
> > @@ -349,9 +381,9 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
> >  		goto out;
> >  	}
> >
> > -	memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
> > +	memcpy_fromio(&rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8);
> >  	rsp_pa = le64_to_cpu(rsp_pa);
> > -	rsp_size = ioread32(&priv->cca->rsp_size);
> > +	rsp_size = ioread32(&priv->regs_t->ctrl_rsp_size);
> >
> >  	if (cmd_pa != rsp_pa) {
> >  		priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
> > --
> > 2.9.3
> >
> 

  reply	other threads:[~2016-12-05 12:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-03 17:52 [PATCH v2 0/3] Locality support for tpm_crb Jarkko Sakkinen
2016-12-03 17:52 ` [PATCH v2 1/3] tpm_crb: map locality registers Jarkko Sakkinen
2016-12-03 18:41   ` Jarkko Sakkinen
2016-12-05 12:07     ` Winkler, Tomas [this message]
2016-12-05 12:21       ` [tpmdd-devel] " Jarkko Sakkinen
2016-12-05 21:31         ` Winkler, Tomas
2016-12-06 18:35           ` Jarkko Sakkinen
2016-12-03 17:52 ` [PATCH v2 2/3] tpm_crb: encapsulate crb_wait_for_reg_32 Jarkko Sakkinen
2016-12-03 18:41   ` Jarkko Sakkinen
2016-12-05 21:34     ` [tpmdd-devel] " Winkler, Tomas
2016-12-06 18:38       ` Jarkko Sakkinen
2016-12-03 17:52 ` [PATCH v2 3/3] tpm_crb: request and relinquish locality 0 Jarkko Sakkinen
2016-12-03 18:42   ` Jarkko Sakkinen
2016-12-05 21:51     ` [tpmdd-devel] " Winkler, Tomas
2016-12-06 18:41       ` Jarkko Sakkinen
2016-12-05 16:32   ` Jason Gunthorpe
2016-12-06 18:40     ` Jarkko Sakkinen
2016-12-03 18:40 ` [PATCH v2 0/3] Locality support for tpm_crb Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5B8DA87D05A7694D9FA63FD143655C1B54336B91@hasmsx108.ger.corp.intel.com \
    --to=tomas.winkler@intel.com \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    --cc=tpmdd-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).