From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3F568ECE561 for ; Thu, 20 Sep 2018 06:27:08 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id BAC102146E for ; Thu, 20 Sep 2018 06:27:07 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org BAC102146E Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=mentor.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1732106AbeITMIy (ORCPT ); Thu, 20 Sep 2018 08:08:54 -0400 Received: from relay1.mentorg.com ([192.94.38.131]:43437 "EHLO relay1.mentorg.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731651AbeITMIx (ORCPT ); Thu, 20 Sep 2018 08:08:53 -0400 Received: from nat-ies.mentorg.com ([192.94.31.2] helo=svr-ies-mbx-02.mgc.mentorg.com) by relay1.mentorg.com with esmtps (TLSv1.2:ECDHE-RSA-AES256-SHA384:256) id 1g2sPk-0001XZ-DU from Deepak_Das@mentor.com ; Wed, 19 Sep 2018 23:26:12 -0700 Received: from [192.168.239.130] (137.202.0.90) by svr-ies-mbx-02.mgc.mentorg.com (139.181.222.2) with Microsoft SMTP Server (TLS) id 15.0.1320.4; Thu, 20 Sep 2018 07:26:03 +0100 Subject: Re: [PATCH] arm64: dts: rockchip: add initial dts support for Rockpro64 board To: Akash Gajjar , References: <1537368206-22058-1-git-send-email-Akash_Gajjar@mentor.com> CC: , Rob Herring , Mark Rutland , Levin Du , Klaus Goger , Ezequiel Garcia , Masahiro Yamada , Arnd Bergmann , Thomas Gleixner , Greg Kroah-Hartman , Shohei Maruyama , Matthias Brugger , Shawn Lin , Enric Balletbo i Serra , , , , From: Deepak Das Message-ID: <5BA33D43.1040001@mentor.com> Date: Thu, 20 Sep 2018 11:55:07 +0530 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.8.0 MIME-Version: 1.0 In-Reply-To: <1537368206-22058-1-git-send-email-Akash_Gajjar@mentor.com> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit X-Originating-IP: [137.202.0.90] X-ClientProxiedBy: svr-ies-mbx-02.mgc.mentorg.com (139.181.222.2) To svr-ies-mbx-02.mgc.mentorg.com (139.181.222.2) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Akash, On Wednesday 19 September 2018 08:13 PM, Akash Gajjar wrote: > This patch basic node support for Rockpro64 board and make it able to bring up. > Please modify the commit message to make it more clear. > Peripheral Works > - SDIO, Sdcard > - USB 2.0, 3.0 > - Leds > > Not working: > - USB Type-C > > Signed-off-by: Akash Gajjar > --- > > Changes in v2: > - add support for usb 2.0, 3.0 > - add fusb302 node and its regulator support > - cleanup pinctrl node > - remove backlight, pcie, sound codec node inherited from firefly-rk3399 dts > Mark this patch as V2. > Documentation/devicetree/bindings/arm/rockchip.txt | 4 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 692 +++++++++++++++++++++ > 3 files changed, 697 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt > index acfd3c7..ac95183 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.txt > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt > @@ -160,6 +160,10 @@ Rockchip platforms device tree bindings > Required root node properties: > - compatible = "pine64,rock64", "rockchip,rk3328"; > > +- Pine64 RockPro64 board: > + Required root node properties: > + - compatible = "pine64,rockpro64", "rockchip,rk3399"; > + > - Rockchip PX3 Evaluation board: > Required root node properties: > - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index b0092d9..03d523a 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -14,5 +14,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts > new file mode 100644 > index 0000000..6fff5dbf > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts > @@ -0,0 +1,692 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * 2018 Akash Gajjar update your Copyright properly. > + */ > + > +/dts-v1/; > +#include > +#include > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "Pine64 RockPro64"; > + compatible = "pine64,rockpro64", "rockchip,rk3399"; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + dc_12v: dc-12v { > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + autorepeat; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrbtn>; > + > + power { > + debounce-interval = <100>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "GPIO Key Power"; > + linux,code = ; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; > + > + work-led { > + label = "work"; > + default-state = "on"; > + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > + }; > + > + diy-led { > + label = "diy"; > + default-state = "off"; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h>; > + > + /* > + * On the module itself this is one of these (depending > + * on the actual card populated): > + * - SDIO_RESET_L_WL_REG_ON > + * - PDN (power down when low) > + */ > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + /* switched by pmic_sleep */ > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; > + > + vcc3v3_pcie: vcc3v3-pcie-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_pwr_en>; > + regulator-name = "vcc3v3_pcie"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&dc_12v>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_sys>; > + }; > + > + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + vin-supply = <&vcc_sys>; > + }; > + > + vcc5v0_typec: vcc5v0-typec-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_typec_en>; > + regulator-name = "vcc5v0_typec"; > + regulator-always-on; > + vin-supply = <&vcc_sys>; > + }; > + > + vcc_sys: vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc_12v>; > + }; > + > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + vin-supply = <&vcc_sys>; > + }; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gmac { > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + assigned-clock-parents = <&clkin_gmac>; > + clock_in_out = "input"; > + phy-supply = <&vcc_lan>; > + phy-mode = "rgmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + tx_delay = <0x28>; > + rx_delay = <0x11>; > + status = "okay"; > +}; Is Ethernet working? If yes, Please add this in working list. > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio1>; > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc_sys>; > + vcc2-supply = <&vcc_sys>; > + vcc3-supply = <&vcc_sys>; > + vcc4-supply = <&vcc_sys>; > + vcc6-supply = <&vcc_sys>; > + vcc7-supply = <&vcc_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc_sys>; > + vcc10-supply = <&vcc_sys>; > + vcc11-supply = <&vcc_sys>; > + vcc12-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcc1v8_pmu>; > + > + regulators { > + vdd_center: DCDC_REG1 { > + regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc1v8_dvp: LDO_REG1 { > + regulator-name = "vcc1v8_dvp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc2v8_dvp: LDO_REG2 { > + regulator-name = "vcc2v8_dvp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc1v8_pmu: LDO_REG3 { > + regulator-name = "vcc1v8_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio: LDO_REG4 { > + regulator-name = "vcc_sdio"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-name = "vcca1v8_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: vcc_lan: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <0>; > + regulator-name = "vdd_cpu_b"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator@41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_gpu"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c1 { > + i2c-scl-rising-time-ns = <300>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +&i2c3 { > + i2c-scl-rising-time-ns = <450>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +&i2c4 { > + i2c-scl-rising-time-ns = <600>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + > + fusb0: typec-portc@22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + interrupt-parent = <&gpio1>; > + interrupts = ; > + pinctrl-names = "default"; > + pinctrl-0 = <&fusb0_int>; > + vbus-supply = <&vcc5v0_typec>; > + status = "okay"; > + }; > +}; > + > +&i2s0 { > + rockchip,playback-channels = <8>; > + rockchip,capture-channels = <8>; > + status = "okay"; > +}; > + > +&i2s1 { > + rockchip,playback-channels = <2>; > + rockchip,capture-channels = <2>; > + status = "okay"; > +}; > + > +&i2s2 { > + status = "okay"; > +}; > + > +&io_domains { > + status = "okay"; > + > + bt656-supply = <&vcc1v8_dvp>; > + audio-supply = <&vcca1v8_codec>; > + sdmmc-supply = <&vcc_sdio>; > + gpio1830-supply = <&vcc_3v0>; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc_3v0>; > + status = "okay"; > +}; > + > +&pinctrl { > + buttons { > + pwrbtn: pwrbtn { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + fusb302x { > + fusb0_int: fusb0-int { > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + leds { > + work_led_gpio: work_led-gpio { > + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + diy_led_gpio: diy_led-gpio { > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + lcd-panel { > + lcd_panel_reset: lcd-panel-reset { > + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + pcie { > + pcie_pwr_en: pcie-pwr-en { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + vsel1_gpio: vsel1-gpio { > + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel2_gpio: vsel2-gpio { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + sdio-pwrseq { > + wifi_enable_h: wifi-enable-h { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb-typec { > + vcc5v0_typec_en: vcc5v0_typec_en { > + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca1v8_s3>; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > + disable-wp; > + max-frequency = <150000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + non-removable; > + status = "okay"; > +}; > + > +&tcphy0 { > + status = "okay"; > +}; > + > +&tcphy1 { > + status = "okay"; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > + > + u2phy0_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy0_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&u2phy1 { > + status = "okay"; > + > + u2phy1_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_xfer &uart0_cts>; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + status = "okay"; > + dr_mode = "otg"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > + status = "okay"; > +}; > + > +&vopl { > + status = "okay"; > +}; > + > +&vopl_mmu { > + status = "okay"; > +}; >