linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
To: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
	Hanjun Guo <guohanjun@huawei.com>,
	John Garry <john.garry@huawei.com>,
	Robin Murphy <robin.murphy@arm.com>,
	Will Deacon <will.deacon@arm.com>, Joerg Roedel <joro@8bytes.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	iommu <iommu@lists.linux-foundation.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Cc: Yunsheng Lin <linyunsheng@huawei.com>, Linuxarm <linuxarm@huawei.com>
Subject: Re: [PATCH RFC 1/1] iommu: set the default iommu-dma mode as non-strict
Date: Sat, 2 Mar 2019 14:12:49 +0800	[thread overview]
Message-ID: <5C7A1EE1.6020200@huawei.com> (raw)
In-Reply-To: <e567cf93-4e34-e15e-9d98-5834bc63e234@arm.com>



On 2019/3/1 19:07, Jean-Philippe Brucker wrote:
> Hi Leizhen,
> 
> On 01/03/2019 04:44, Leizhen (ThunderTown) wrote:
>>
>>
>> On 2019/2/26 20:36, Hanjun Guo wrote:
>>> Hi Jean,
>>>
>>> On 2019/1/31 22:55, Jean-Philippe Brucker wrote:
>>>> Hi,
>>>>
>>>> On 31/01/2019 13:52, Zhen Lei wrote:
>>>>> Currently, many peripherals are faster than before. For example, the top
>>>>> speed of the older netcard is 10Gb/s, and now it's more than 25Gb/s. But
>>>>> when iommu page-table mapping enabled, it's hard to reach the top speed
>>>>> in strict mode, because of frequently map and unmap operations. In order
>>>>> to keep abreast of the times, I think it's better to set non-strict as
>>>>> default.
>>>>
>>>> Most users won't be aware of this relaxation and will have their system
>>>> vulnerable to e.g. thunderbolt hotplug. See for example 4.3 Deferred
>>>> Invalidation in
>>>> http://www.cs.technion.ac.il/users/wwwb/cgi-bin/tr-get.cgi/2018/MSC/MSC-2018-21.pdf
>> Hi Jean,
>>
>>    In fact, we have discussed the vulnerable of deferred invalidation before upstream
>> the non-strict patches. The attacks maybe possible because of an untrusted device or
>> the mistake of the device driver. And we limited the VFIO to still use strict mode.
>>    As mentioned in the pdf, limit the freed memory with deferred invalidation only to
>> be reused by the device, can mitigate the vulnerability. But it's too hard to implement
>> it now.
>>    A compromise maybe we only apply non-strict to (1) dma_free_coherent, because the
>> memory is controlled by DMA common module, so we can make the memory to be freed after
>> the global invalidation in the timer handler. (2) And provide some new APIs related to
>> iommu_unmap_page/sg, these new APIs deferred invalidation. And the candiate device
>> drivers update the APIs if they want to improve performance. (3) Make sure that only
>> the trusted devices and trusted drivers can apply (1) and (2). For example, the driver
>> must be built into kernel Image.
> 
> Do we have a notion of untrusted kernel drivers? A userspace driver
It seems impossible to have such driver. The modules insmod by root users should be
guaranteed by themselves.

> (VFIO) is untrusted, ok. But a malicious driver loaded into the kernel
> address space would have much easier ways to corrupt the system than to
> exploit lazy mode...
Yes, so that we have no need to consider untrusted drivers.

> 
> For (3), I agree that we should at least disallow lazy mode if
> pci_dev->untrusted is set. At the moment it means that we require the
> strictest IOMMU configuration for external-facing PCI ports, but it can
> be extended to blacklist other vulnerable devices or locations.
I plan to add an attribute file for each device, espcially for hotplug devices. And
let the root users to decide which mode should be used, strict or non-strict. Becasue
they should known whether the hot-plug divice is trusted or not.

> 
> If you do (3) then maybe we don't need (1) and (2), which require a
> tonne of work in the DMA and IOMMU layers (but would certainly be nice
> to see, since it would also help handle ATS invalidation timeouts)
> 
> Thanks,
> Jean
> 
>>    So that some high-end trusted devices use non-strict mode, and keep others still using
>> strict mode. The drivers who want to use non-strict mode, should change to use new APIs
>> by themselves.
>>
>>
>>>>
>>>> Why not keep the policy to secure by default, as we do for
>>>> iommu.passthrough? And maybe add something similar to
>>>> CONFIG_IOMMU_DEFAULT_PASSTRHOUGH? It's easy enough for experts to pass a
>>>> command-line argument or change the default config.
>>>
>>> Sorry for the late reply, it was Chinese new year, and we had a long discussion
>>> internally, we are fine to add a Kconfig but not sure OS vendors will set it
>>> to default y.
>>>
>>> OS vendors seems not happy to pass a command-line argument, to be honest,
>>> this is our motivation to enable non-strict as default. Hope OS vendors
>>> can see this email thread, and give some input here.
>>>
>>> Thanks
>>> Hanjun
>>>
>>>
>>> .
>>>
>>
> 
> 
> .
> 

-- 
Thanks!
BestRegards


  reply	other threads:[~2019-03-02  6:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-31 13:52 [PATCH RFC 1/1] iommu: set the default iommu-dma mode as non-strict Zhen Lei
2019-01-31 14:55 ` Jean-Philippe Brucker
2019-02-26 12:36   ` Hanjun Guo
2019-03-01  4:44     ` Leizhen (ThunderTown)
2019-03-01 11:07       ` Jean-Philippe Brucker
2019-03-02  6:12         ` Leizhen (ThunderTown) [this message]
2019-03-04 15:52           ` Robin Murphy
2019-03-06 11:06             ` Leizhen (ThunderTown)
2019-03-06 12:07               ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5C7A1EE1.6020200@huawei.com \
    --to=thunder.leizhen@huawei.com \
    --cc=guohanjun@huawei.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe.brucker@arm.com \
    --cc=john.garry@huawei.com \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=linyunsheng@huawei.com \
    --cc=robin.murphy@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).