Re: [RFT PATCH 0/4] hwmon: k10temp driver improvements

["Ondrej Čerman" <ocerman@sda1.eu>]

Dňa 17. 1. 2020 o 19:46 Guenter Roeck napísal(a):
> On Fri, Jan 17, 2020 at 10:46:25AM +0100, Ondrej Čerman wrote:
>> Dňa 16. 1. 2020 o 15:17 Guenter Roeck napísal(a):
>>> This patch series implements various improvements for the k10temp driver.
>>>
>>> Patch 1/4 introduces the use of bit operations.
>>>
>>> Patch 2/4 converts the driver to use the devm_hwmon_device_register_with_info
>>> API. This not only simplifies the code and reduces its size, it also
>>> makes the code easier to maintain and enhance.
>>>
>>> Patch 3/4 adds support for reporting Core Complex Die (CCD) temperatures
>>> on Ryzen 3 (Zen2) CPUs.
>>>
>>> Patch 4/4 adds support for reporting core and SoC current and voltage
>>> information on Ryzen CPUs.
>>>
>>> With all patches in place, output on Ryzen 3900 CPUs looks as follows
>>> (with the system under load).
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> Vcore:        +1.36 V
>>> Vsoc:         +1.18 V
>>> Tdie:         +86.8°C  (high = +70.0°C)
>>> Tctl:         +86.8°C
>>> Tccd1:        +80.0°C
>>> Tccd2:        +81.8°C
>>> Icore:       +44.14 A
>>> Isoc:        +13.83 A
>>>
>>> The patch series has only been tested with Ryzen 3900 CPUs. Further test
>>> coverage will be necessary before the changes can be applied to the Linux
>>> kernel.
>>>
>> Hello everyone, I am the author of https://github.com/ocerman/zenpower/ .
>>
>> It is nice to see this merged.
>>
>> I just want to warn you that there have been reported issues with
>> Threadripper CPUs to zenpower issue tracker. Also I think that no-one tested
>> EPYC CPUs.
>>
>> Most of the stuff I was able to figure out by trial-and-error approach and
>> unfortunately because I do not own any Threadripper CPU I was not able to
>> test and fix reported problems.
>>
> Thanks a lot for the note. The key problem seems to be that Threadripper
> doesn't report SoC current and voltage. Is that correct ? If so, that
> should be easy to solve.

Hello,

I thought that initially, but I was wrong. It seems like that these 
multi-node CPUs are reporting SOC and Core voltage/current data at 
particular node. Look at this HWiNFO64 screenshot of 2990WX for 
reference: https://i.imgur.com/yM9X5nd.jpg . They also may be using 
different addresses and/or factors.

> On a side note, drivers/gpu/drm/amd/include/asic_reg/thm/thm_10_0_offset.h
> suggests that two more temperature sensors might be available at 0x0005995C
> and 0x00059960 (DIE3_TEMP and SW_TEMP). Have you ever tried that ?
>
> Thanks,
> Guenter

I was aware of 0005995c and I thought that it could be Tdie3 (that's why 
I have included it in debug output, someone already shared that 3960X is 
reporting data on that address). I think this one can be safely included.

I was not aware of the other address, I will try it.

Ondrej.