[PATCH 4.9 000/141] 4.9.137-stable review

[PATCH 4.9 000/141] 4.9.137-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.137 release.
There are 141 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue Nov 13 22:15:38 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.137-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.137-rc1

Josef Bacik <jbacik@fb.com>
    btrfs: set max_extent_size properly

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix null pointer dereference on compressed write path error

Qu Wenruo <wqu@suse.com>
    btrfs: qgroup: Dirty all qgroups before rescan

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix wrong dentries after fsync of file that got its parent replaced

Josef Bacik <josef@toxicpanda.com>
    btrfs: make sure we create all new block groups

Josef Bacik <jbacik@fb.com>
    btrfs: reset max_extent_size on clear in a bitmap

Josef Bacik <josef@toxicpanda.com>
    btrfs: wait on caching when putting the bg cache

Jeff Mahoney <jeffm@suse.com>
    btrfs: don't attempt to trim devices that don't support it

Jeff Mahoney <jeffm@suse.com>
    btrfs: iterate all devices during trim, instead of fs_devices::alloc_list

Jeff Mahoney <jeffm@suse.com>
    btrfs: fix error handling in free_log_tree

Qu Wenruo <wqu@suse.com>
    btrfs: locking: Add extra check in btrfs_init_new_buffer() to avoid deadlock

Qu Wenruo <wqu@suse.com>
    btrfs: Handle owner mismatch gracefully when walking up tree

Johan Hovold <johan@kernel.org>
    soc/tegra: pmc: Fix child-node lookup

Thor Thayer <thor.thayer@linux.intel.com>
    arm64: dts: stratix10: Correct System Manager register size

Nicolas Pitre <nicolas.pitre@linaro.org>
    Cramfs: fix abad comparison when wrap-arounds occur

Colin Ian King <colin.king@canonical.com>
    rpmsg: smd: fix memory leak on channel create

Tri Vo <trong@android.com>
    arm64: lse: remove -fcall-used-x0 flag

Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
    media: em28xx: make v4l2-compliance happier by starting sequence on zero

Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
    media: em28xx: fix input name for Terratec AV 350

Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
    media: tvp5150: avoid going past array on v4l2_querymenu()

Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
    media: em28xx: use a default format if TRY_FMT fails

Juergen Gross <jgross@suse.com>
    xen: fix xen_qlock_wait()

He Zhe <zhe.he@windriver.com>
    kgdboc: Passing ekgdboc to command line causes panic

Hans Verkuil <hverkuil@xs4all.nl>
    media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD

Maciej W. Rozycki <macro@linux-mips.org>
    TC: Set DMA masks for devices

Aaro Koskinen <aaro.koskinen@iki.fi>
    MIPS: OCTEON: fix out of bounds array access on CN68XX

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/msi: Fix compile error on mpc83xx

Wenwen Wang <wang6495@umn.edu>
    dm ioctl: harden copy_params()'s copy_from_user() from malicious users

Amir Goldstein <amir73il@gmail.com>
    lockd: fix access beyond unterminated strings in prints

Trond Myklebust <trondmy@gmail.com>
    nfsd: Fix an Oops in free_session()

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.1: Fix the r/wsize checking

Lukas Wunner <lukas@wunner.de>
    genirq: Fix race on spurious interrupt detection

He Zhe <zhe.he@windriver.com>
    printk: Fix panic caused by passing log_buf_len to command line

Steve French <stfrench@microsoft.com>
    smb3: on kerberos mount if server doesn't specify auth type use krb5

Steve French <stfrench@microsoft.com>
    smb3: do not attempt cifs operation in smb3 query info error path

Steve French <stfrench@microsoft.com>
    smb3: allow stats which track session and share reconnects to be reset

Andreas Kemnade <andreas@kemnade.info>
    w1: omap-hdq: fix missing bus unregister at removal

Eugen Hristev <eugen.hristev@microchip.com>
    iio: adc: at91: fix wrong channel number in triggered buffer mode

Eugen Hristev <eugen.hristev@microchip.com>
    iio: adc: at91: fix acking DRDY irq on simple conversions

Alexey Khoroshilov <khoroshilov@ispras.ru>
    iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()

Lars-Peter Clausen <lars@metafoo.de>
    iio: ad5064: Fix regulator handling

Arnd Bergmann <arnd@arndb.de>
    kbuild: fix kernel/bounds.c 'W=1' warning

Mike Kravetz <mike.kravetz@oracle.com>
    hugetlbfs: dirty pages as they are added to pagecache

Eric Biggers <ebiggers@google.com>
    ima: fix showing large 'violations' or 'runtime_measurements_count'

Horia Geantă <horia.geanta@nxp.com>
    crypto: tcrypt - fix ghash-generic speed test

Ondrej Mosnacek <omosnace@redhat.com>
    crypto: lrw - Fix out-of bounds access on counter overflow

Eric W. Biederman <ebiederm@xmission.com>
    signal/GenWQE: Fix sending of SIGKILL

Bin Meng <bmeng.cn@gmail.com>
    PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk

Qiuxu Zhuo <qiuxu.zhuo@intel.com>
    EDAC, skx_edac: Fix logical channel intermediate decoding

Tony Luck <tony.luck@intel.com>
    EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting

Breno Leitao <leitao@debian.org>
    HID: hiddev: fix potential Spectre v1

Wang Shilong <wshilong@ddn.com>
    ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTR

Lukas Czerner <lczerner@redhat.com>
    ext4: initialize retries variable in ext4_da_write_inline_data_begin()

Al Viro <viro@zeniv.linux.org.uk>
    gfs2_meta: ->mount() can get NULL dev_name

Jan Kara <jack@suse.cz>
    jbd2: fix use after free in jbd2_log_do_checkpoint()

Takashi Iwai <tiwai@suse.de>
    ASoC: intel: skylake: Add missing break in skl_tplg_get_token()

Alexander Duyck <alexander.h.duyck@linux.intel.com>
    libnvdimm: Hold reference on parent while scheduling async init

Stefan Nuernberger <snu@amazon.com>
    net/ipv4: defensive cipso option parsing

Luca Coelho <luciano.coelho@intel.com>
    iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()

Shuah Khan (Samsung OSG) <shuah@kernel.org>
    usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten

Lubomir Rintel <lkundrak@v3.sk>
    libertas: don't set URB_ZERO_PACKET on IN USB transfer

Juergen Gross <jgross@suse.com>
    xen: make xen_qlock_wait() nestable

Juergen Gross <jgross@suse.com>
    xen: fix race in xen_qlock_wait()

Vasilis Liaskovitis <vliaskovitis@suse.com>
    xen/blkfront: avoid NULL blkfront_info dereference on device removal

Dr. Greg Wettstein <greg@wind.enjellic.com>
    tpm: Restore functionality to xen vtpm driver.

Joe Jin <joe.jin@oracle.com>
    xen-swiotlb: use actually allocated size on check physical continuous

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindings

Viresh Kumar <viresh.kumar@linaro.org>
    arm: dts: exynos: Add missing cooling device properties for CPUs

Viresh Kumar <viresh.kumar@linaro.org>
    ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Check the non-cached stream buffers more explicitly

Paul Cercueil <paul@crapouillou.net>
    dmaengine: dma-jz4780: Return error if not probed from DT

Eric W. Biederman <ebiederm@xmission.com>
    signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Correct soft lockup when running mds diagnostics

Alexandre Belloni <alexandre.belloni@bootlin.com>
    uio: ensure class is registered before devices

Waiman Long <longman@redhat.com>
    driver/dma/ioat: Call del_timer_sync() without holding prep_lock

Loic Poulain <loic.poulain@linaro.org>
    usb: chipidea: Prevent unbalanced IRQ disable

Horia Geantă <horia.geanta@nxp.com>
    crypto: caam - fix implicit casts in endianness helpers

Suzuki K Poulose <suzuki.poulose@arm.com>
    coresight: etb10: Fix handling of perf mode

Tonghao Zhang <xiangxia.m.yue@gmail.com>
    PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice

Shaohua Li <shli@fb.com>
    MD: fix invalid stored role for a disk

Theodore Ts'o <tytso@mit.edu>
    ext4: fix argument checking in EXT4_IOC_MOVE_EXT

Alexandre Belloni <alexandre.belloni@bootlin.com>
    usb: gadget: udc: atmel: handle at91sam9rl PMC

Jorgen Hansen <jhansen@vmware.com>
    VMCI: Resource wildcard match fixed

Javier Martinez Canillas <javierm@redhat.com>
    tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated

Denis Drozdov <denisd@mellanox.com>
    IB/ipoib: Clear IPCB before icmp_send

Parav Pandit <parav@mellanox.com>
    RDMA/core: Do not expose unsupported counters

Wenwen Wang <wang6495@umn.edu>
    scsi: megaraid_sas: fix a missing-check bug

Finn Thain <fthain@telegraphics.com.au>
    scsi: esp_scsi: Track residual for PIO transfers

Michal Hocko <mhocko@suse.com>
    cgroup, netclassid: add a preemption point to write_classid

Martin Willi <martin@strongswan.org>
    ath10k: schedule hardware restart if WMI command times out

Sebastian Basierski <sebastianx.basierski@intel.com>
    ixgbevf: VF2VF TCP RSS

Douglas Anderson <dianders@chromium.org>
    pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

Douglas Anderson <dianders@chromium.org>
    pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

Stephen Boyd <swboyd@chromium.org>
    pinctrl: qcom: spmi-mpp: Fix drive strength setting

Hans de Goede <hdegoede@redhat.com>
    ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers

Masami Hiramatsu <mhiramat@kernel.org>
    kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()

Arend van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: fix for proper support of 160MHz bandwidth

YueHaibing <yuehaibing@huawei.com>
    pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux

Ben Hutchings <ben@decadent.org.uk>
    x86: boot: Fix EFI stub alignment

Christian Hewitt <christianshewitt@gmail.com>
    Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth

Viresh Kumar <viresh.kumar@linaro.org>
    cpufreq: dt: Try freeing static OPPs only if we have added them

Lubomir Rintel <lkundrak@v3.sk>
    x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC

Shaul Triebitz <shaul.triebitz@intel.com>
    iwlwifi: pcie: avoid empty free RB queue

Yu Zhao <yuzhao@google.com>
    mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01

Prarit Bhargava <prarit@redhat.com>
    cpupower: Fix coredump on VMWare

Sanskriti Sharma <sansharm@redhat.com>
    perf strbuf: Match va_{add,copy} with va_end

Sanskriti Sharma <sansharm@redhat.com>
    perf tools: Cleanup trace-event-info 'tdata' leak

Sanskriti Sharma <sansharm@redhat.com>
    perf tools: Free temporary 'sys' string in read_event_files()

Thierry Reding <treding@nvidia.com>
    hwmon: (pwm-fan) Set fan speed to 0 on suspend

Janosch Frank <frankja@linux.ibm.com>
    s390/sthyi: Fix machine name validity indication

Serhey Popovych <serhe.popovych@gmail.com>
    tun: Consistently configure generic netdev params via rtnetlink

Omar Sandoval <osandov@fb.com>
    swim: fix cleanup on setup error

Omar Sandoval <osandov@fb.com>
    ataflop: fix error handling during setup

Waiman Long <longman@redhat.com>
    locking/lockdep: Fix debug_locks off performance problem

Wolfram Sang <wsa+renesas@sang-engineering.com>
    i2c: rcar: cleanup DMA for all kinds of failure

Masami Hiramatsu <mhiramat@kernel.org>
    selftests: ftrace: Add synthetic event syntax testcase

Nathan Chancellor <natechancellor@gmail.com>
    net: qla3xxx: Remove overflowing shift statement

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    x86/fpu: Remove second definition of fpu in __fpu__restore_sig()

David Miller <davem@davemloft.net>
    perf cpu_map: Align cpu map synthesized events properly.

Song Muchun <smuchun@gmail.com>
    sched/fair: Fix the min_vruntime update logic in dequeue_entity()

David S. Miller <davem@davemloft.net>
    sparc64: Make proc_id signed.

David S. Miller <davem@davemloft.net>
    sparc: Fix single-pcr perf event counter management.

Florian Westphal <fw@strlen.de>
    xfrm: policy: use hlist rcu variants on insert

Jiri Olsa <jolsa@kernel.org>
    Revert "perf tools: Fix PMU term format max value calculation"

Eric Dumazet <edumazet@google.com>
    bpf: do not blindly change rlimit in reuseport net selftest

Sai Praneeth <sai.praneeth.prakhya@intel.com>
    x86/speculation: Support Enhanced IBRS on future CPUs

He Zhe <zhe.he@windriver.com>
    x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided

Jiri Kosina <jkosina@suse.cz>
    x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation

Alex Stanoev <alex@astanoev.com>
    ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio pops

Jeremy Cline <jcline@redhat.com>
    ALSA: hda - Add mic quirk for the Lenovo G50-30 (17aa:3905)

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix headphone pin config for ASUS G751

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Add quirk for ASUS G751 laptop

Helge Deller <deller@gmx.de>
    parisc: Fix map_pages() to not overwrite existing pte entries

John David Anglin <dave.anglin@bell.net>
    parisc: Fix address in HPMC IVA

Jan Glauber <jglauber@cavium.com>
    ipmi: Fix timer race with module unload

Erik Schmauss <erik.schmauss@intel.com>
    ACPICA: AML interpreter: add region addresses in global list during initialization

Maciej S. Szmigiero <mail@maciej.szmigiero.name>
    pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges

Hou Tao <houtao1@huawei.com>
    jffs2: free jffs2_sb_info through jffs2_kill_sb()

Dmitry Bazhenov <bazhenov.dn@gmail.com>
    hwmon: (pmbus) Fix page count auto-detection.

Tang Junhui <tang.junhui.linux@gmail.com>
    bcache: fix miss key refill->end in writeback


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/exynos3250.dtsi                  |  16 +++
 arch/arm/boot/dts/exynos4210.dtsi                  |  15 ++-
 arch/arm/boot/dts/exynos4412.dtsi                  |   2 -
 arch/arm/boot/dts/exynos5250.dtsi                  | 116 ++++++++++++++++-----
 arch/arm/boot/dts/exynos5420-cpus.dtsi             |  16 ---
 arch/arm/boot/dts/exynos5422-cpus.dtsi             |  16 ---
 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi  |   2 +-
 arch/arm64/lib/Makefile                            |   2 +-
 arch/mips/cavium-octeon/executive/cvmx-helper.c    |   2 +-
 arch/parisc/kernel/entry.S                         |   2 +-
 arch/parisc/kernel/traps.c                         |   3 +-
 arch/parisc/mm/init.c                              |   8 +-
 arch/powerpc/include/asm/mpic.h                    |   7 ++
 arch/s390/kvm/sthyi.c                              |   8 +-
 arch/sparc/include/asm/cpudata_64.h                |   2 +-
 arch/sparc/kernel/perf_event.c                     |  17 ++-
 arch/x86/boot/tools/build.c                        |   7 ++
 arch/x86/include/asm/cpufeatures.h                 |   1 +
 arch/x86/include/asm/nospec-branch.h               |   1 +
 arch/x86/kernel/check.c                            |  15 +++
 arch/x86/kernel/cpu/bugs.c                         |  77 ++++++++++++--
 arch/x86/kernel/cpu/common.c                       |   3 +
 arch/x86/kernel/fpu/signal.c                       |   1 -
 arch/x86/platform/olpc/olpc-xo1-rtc.c              |   3 +
 arch/x86/xen/spinlock.c                            |  35 +++----
 crypto/lrw.c                                       |   7 +-
 crypto/tcrypt.c                                    |   3 +
 drivers/acpi/acpi_lpss.c                           |   2 +
 drivers/acpi/acpica/dsopcode.c                     |   4 +
 drivers/block/ataflop.c                            |  25 +++--
 drivers/block/swim.c                               |  13 ++-
 drivers/block/xen-blkfront.c                       |   3 +
 drivers/bluetooth/btbcm.c                          |   1 +
 drivers/char/ipmi/ipmi_ssif.c                      |  10 +-
 drivers/char/tpm/tpm-interface.c                   |   3 +-
 drivers/char/tpm/xen-tpmfront.c                    |   2 +-
 drivers/cpufreq/cpufreq-dt.c                       |  34 +++---
 drivers/crypto/caam/regs.h                         |  28 ++---
 drivers/dma/dma-jz4780.c                           |   5 +
 drivers/dma/ioat/init.c                            |   9 +-
 drivers/edac/i7core_edac.c                         |   1 +
 drivers/edac/sb_edac.c                             |   1 +
 drivers/edac/skx_edac.c                            |   3 +-
 drivers/hid/usbhid/hiddev.c                        |  18 +++-
 drivers/hwmon/pmbus/pmbus.c                        |   2 +
 drivers/hwmon/pmbus/pmbus_core.c                   |   5 +-
 drivers/hwmon/pwm-fan.c                            |  12 ++-
 drivers/hwtracing/coresight/coresight-etb10.c      |   4 +
 drivers/i2c/busses/i2c-rcar.c                      |   6 +-
 drivers/iio/adc/at91_adc.c                         |   6 +-
 drivers/iio/adc/fsl-imx25-gcq.c                    |   6 ++
 drivers/iio/dac/ad5064.c                           |  53 +++++++---
 drivers/infiniband/core/sysfs.c                    |  19 ++--
 drivers/infiniband/ulp/ipoib/ipoib_cm.c            |   8 +-
 drivers/md/bcache/btree.c                          |   2 +-
 drivers/md/dm-ioctl.c                              |  18 ++--
 drivers/md/md.c                                    |   4 +
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c      |   2 +-
 drivers/media/i2c/tvp5150.c                        |   2 +-
 drivers/media/usb/em28xx/em28xx-cards.c            |   4 +-
 drivers/media/usb/em28xx/em28xx-video.c            |   8 +-
 drivers/misc/genwqe/card_base.h                    |   2 +-
 drivers/misc/genwqe/card_dev.c                     |   9 +-
 drivers/misc/vmw_vmci/vmci_driver.c                |   2 +-
 drivers/misc/vmw_vmci/vmci_resource.c              |   3 +-
 drivers/mmc/host/sdhci-pci-o2micro.c               |   3 +
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c  |   4 +
 drivers/net/ethernet/qlogic/qla3xxx.c              |   2 -
 drivers/net/tun.c                                  |   2 +
 drivers/net/wireless/ath/ath10k/wmi.c              |   6 ++
 .../net/wireless/broadcom/brcm80211/brcmutil/d11.c |  34 +++++-
 .../broadcom/brcm80211/include/brcmu_wifi.h        |   2 +
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c        |  24 ++++-
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c       |  32 ++++--
 drivers/net/wireless/marvell/libertas/if_usb.c     |   2 -
 drivers/nvdimm/bus.c                               |   4 +
 drivers/pci/msi.c                                  |   9 +-
 drivers/pci/quirks.c                               |   4 +
 drivers/pcmcia/ricoh.h                             |  35 +++++++
 drivers/pcmcia/yenta_socket.c                      |   3 +-
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c            |  27 +++--
 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c           |  28 +++--
 drivers/rpmsg/qcom_smd.c                           |   7 +-
 drivers/scsi/esp_scsi.c                            |   1 +
 drivers/scsi/esp_scsi.h                            |   2 +
 drivers/scsi/lpfc/lpfc_sli.c                       |   7 ++
 drivers/scsi/mac_esp.c                             |   2 +
 drivers/scsi/megaraid/megaraid_sas_base.c          |   3 +
 drivers/soc/tegra/pmc.c                            |   2 +-
 drivers/tc/tc.c                                    |   8 +-
 drivers/tty/serial/kgdboc.c                        |   5 +
 drivers/uio/uio.c                                  |   9 ++
 drivers/usb/chipidea/otg.h                         |   3 +-
 drivers/usb/gadget/udc/atmel_usba_udc.c            |   2 +
 drivers/usb/usbip/vudc_main.c                      |  10 +-
 drivers/w1/masters/omap_hdq.c                      |   2 +
 drivers/xen/swiotlb-xen.c                          |   6 ++
 fs/btrfs/extent-tree.c                             |  47 +++++++--
 fs/btrfs/free-space-cache.c                        |  32 ++++--
 fs/btrfs/inode.c                                   |   1 +
 fs/btrfs/qgroup.c                                  |   1 +
 fs/btrfs/relocation.c                              |   2 +-
 fs/btrfs/tree-log.c                                |  39 +++++--
 fs/cifs/cifs_debug.c                               |   3 +
 fs/cifs/cifs_spnego.c                              |   6 +-
 fs/cifs/inode.c                                    |  10 +-
 fs/cramfs/inode.c                                  |   3 +-
 fs/ext4/inline.c                                   |   2 +-
 fs/ext4/ioctl.c                                    |   4 +-
 fs/ext4/move_extent.c                              |   8 +-
 fs/gfs2/ops_fstype.c                               |   3 +
 fs/jbd2/checkpoint.c                               |   4 +-
 fs/jffs2/super.c                                   |   4 +-
 fs/lockd/host.c                                    |   2 +-
 fs/nfs/nfs4client.c                                |  16 +--
 include/linux/tc.h                                 |   1 +
 kernel/bounds.c                                    |   4 +-
 kernel/cpu.c                                       |  11 +-
 kernel/irq/manage.c                                |   8 +-
 kernel/kprobes.c                                   |  27 +++--
 kernel/locking/lockdep.c                           |   4 +-
 kernel/printk/printk.c                             |   7 +-
 kernel/sched/fair.c                                |   2 +-
 kernel/signal.c                                    |   2 +-
 lib/debug_locks.c                                  |   2 +-
 mm/hugetlb.c                                       |   6 ++
 net/core/netclassid_cgroup.c                       |   1 +
 net/ipv4/cipso_ipv4.c                              |  11 +-
 net/sunrpc/svc_xprt.c                              |   2 +-
 net/xfrm/xfrm_policy.c                             |   8 +-
 security/integrity/ima/ima_fs.c                    |   6 +-
 sound/pci/ca0106/ca0106.h                          |   2 +-
 sound/pci/hda/hda_controller.h                     |   1 +
 sound/pci/hda/hda_intel.c                          |  11 +-
 sound/pci/hda/patch_conexant.c                     |   1 +
 sound/pci/hda/patch_realtek.c                      |  20 ++++
 sound/soc/intel/skylake/skl-topology.c             |   1 +
 tools/perf/util/event.c                            |   1 +
 tools/perf/util/pmu.c                              |  13 +--
 tools/perf/util/strbuf.c                           |  10 +-
 tools/perf/util/trace-event-info.c                 |   2 +
 tools/perf/util/trace-event-read.c                 |   5 +-
 tools/power/cpupower/utils/cpufreq-info.c          |   2 +
 tools/power/cpupower/utils/helpers/amd.c           |   5 +
 .../inter-event/trigger-synthetic-event-syntax.tc  |  80 ++++++++++++++
 tools/testing/selftests/net/reuseport_bpf.c        |  13 ++-
 147 files changed, 1116 insertions(+), 360 deletions(-)

[PATCH 4.9 001/141] bcache: fix miss key refill->end in writeback

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tang Junhui <tang.junhui.linux@gmail.com>

commit 2d6cb6edd2c7fb4f40998895bda45006281b1ac5 upstream.

refill->end record the last key of writeback, for example, at the first
time, keys (1,128K) to (1,1024K) are flush to the backend device, but
the end key (1,1024K) is not included, since the bellow code:
	if (bkey_cmp(k, refill->end) >= 0) {
		ret = MAP_DONE;
		goto out;
	}
And in the next time when we refill writeback keybuf again, we searched
key start from (1,1024K), and got a key bigger than it, so the key
(1,1024K) missed.
This patch modify the above code, and let the end key to be included to
the writeback key buffer.

Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/bcache/btree.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -2367,7 +2367,7 @@ static int refill_keybuf_fn(struct btree
 	struct keybuf *buf = refill->buf;
 	int ret = MAP_CONTINUE;
 
-	if (bkey_cmp(k, refill->end) >= 0) {
+	if (bkey_cmp(k, refill->end) > 0) {
 		ret = MAP_DONE;
 		goto out;
 	}

[PATCH 4.9 002/141] hwmon: (pmbus) Fix page count auto-detection.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Bazhenov <bazhenov.dn@gmail.com>

commit e7c6a55606b5c46b449d76588968b4d8caae903f upstream.

Devices with compatible="pmbus" field have zero initial page count,
and pmbus_clear_faults() being called before the page count auto-
detection does not actually clear faults because it depends on the
page count. Non-cleared faults in its turn may fail the subsequent
page count auto-detection.

This patch fixes this problem by calling pmbus_clear_fault_page()
for currently set page and calling pmbus_clear_faults() after the
page count was detected.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Bazhenov <bazhenov.dn@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/pmbus/pmbus.c      |    2 ++
 drivers/hwmon/pmbus/pmbus_core.c |    5 ++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -118,6 +118,8 @@ static int pmbus_identify(struct i2c_cli
 		} else {
 			info->pages = 1;
 		}
+
+		pmbus_clear_faults(client);
 	}
 
 	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -1759,7 +1759,10 @@ static int pmbus_init_common(struct i2c_
 	if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
 		client->flags |= I2C_CLIENT_PEC;
 
-	pmbus_clear_faults(client);
+	if (data->info->pages)
+		pmbus_clear_faults(client);
+	else
+		pmbus_clear_fault_page(client, -1);
 
 	if (info->identify) {
 		ret = (*info->identify)(client, info);

[PATCH 4.9 003/141] jffs2: free jffs2_sb_info through jffs2_kill_sb()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hou Tao <houtao1@huawei.com>

commit 92e2921f7eee63450a5f953f4b15dc6210219430 upstream.

When an invalid mount option is passed to jffs2, jffs2_parse_options()
will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will
be used (use-after-free) and freeed (double-free) in jffs2_kill_sb().

Fix it by removing the buggy invocation of kfree() when getting invalid
mount options.

Fixes: 92abc475d8de ("jffs2: implement mount option parsing and compression overriding")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jffs2/super.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -285,10 +285,8 @@ static int jffs2_fill_super(struct super
 	sb->s_fs_info = c;
 
 	ret = jffs2_parse_options(c, data);
-	if (ret) {
-		kfree(c);
+	if (ret)
 		return -EINVAL;
-	}
 
 	/* Initialize JFFS2 superblock locks, the further initialization will
 	 * be done later */

[PATCH 4.9 004/141] pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej S. Szmigiero <mail@maciej.szmigiero.name>

commit 95691e3eddc41da2d1cd3cca51fecdfb46bd85bc upstream.

Currently, "disable_clkrun" yenta_socket module parameter is only
implemented for TI CardBus bridges.
Add also an implementation for Ricoh bridges that have the necessary
setting documented in publicly available datasheets.

Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work
correctly unless the CLKRUN protocol is disabled.

Let's also make it clear in its description that the "disable_clkrun"
module parameter only works on these two previously mentioned brands of
CardBus bridges.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: stable@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pcmcia/ricoh.h        |   35 +++++++++++++++++++++++++++++++++++
 drivers/pcmcia/yenta_socket.c |    3 ++-
 2 files changed, 37 insertions(+), 1 deletion(-)

--- a/drivers/pcmcia/ricoh.h
+++ b/drivers/pcmcia/ricoh.h
@@ -119,6 +119,10 @@
 #define  RL5C4XX_MISC_CONTROL           0x2F /* 8 bit */
 #define  RL5C4XX_ZV_ENABLE              0x08
 
+/* Misc Control 3 Register */
+#define RL5C4XX_MISC3			0x00A2 /* 16 bit */
+#define  RL5C47X_MISC3_CB_CLKRUN_DIS	BIT(1)
+
 #ifdef __YENTA_H
 
 #define rl_misc(socket)		((socket)->private[0])
@@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_so
         }
 }
 
+static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet)
+{
+	u16 misc3;
+
+	/*
+	 * RL5C475II likely has this setting, too, however no datasheet
+	 * is publicly available for this chip
+	 */
+	if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 &&
+	    socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478)
+		return;
+
+	if (socket->dev->revision < 0x80)
+		return;
+
+	misc3 = config_readw(socket, RL5C4XX_MISC3);
+	if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) {
+		if (!quiet)
+			dev_dbg(&socket->dev->dev,
+				"CLKRUN feature already disabled\n");
+	} else if (disable_clkrun) {
+		if (!quiet)
+			dev_info(&socket->dev->dev,
+				 "Disabling CLKRUN feature\n");
+		misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS;
+		config_writew(socket, RL5C4XX_MISC3, misc3);
+	}
+}
+
 static void ricoh_save_state(struct yenta_socket *socket)
 {
 	rl_misc(socket) = config_readw(socket, RL5C4XX_MISC);
@@ -172,6 +205,7 @@ static void ricoh_restore_state(struct y
 	config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket));
 	config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket));
 	config_writew(socket, RL5C4XX_CONFIG, rl_config(socket));
+	ricoh_set_clkrun(socket, true);
 }
 
 
@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_s
 	config_writew(socket, RL5C4XX_CONFIG, config);
 
 	ricoh_set_zv(socket);
+	ricoh_set_clkrun(socket, false);
 
 	return 0;
 }
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -26,7 +26,8 @@
 
 static bool disable_clkrun;
 module_param(disable_clkrun, bool, 0444);
-MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
+MODULE_PARM_DESC(disable_clkrun,
+		 "If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)");
 
 static bool isa_probe = 1;
 module_param(isa_probe, bool, 0444);

[PATCH 4.9 005/141] ACPICA: AML interpreter: add region addresses in global list during initialization

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Erik Schmauss <erik.schmauss@intel.com>

commit 4abb951b73ff0a8a979113ef185651aa3c8da19b upstream.

The table load process omitted adding the operation region address
range to the global list. This omission is problematic because the OS
queries the global list to check for address range conflicts before
deciding which drivers to load. This commit may result in warning
messages that look like the following:

[    7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F conflicts with op_region 0x00000400-0x0000047F (\PMIO) (20180531/utaddress-213)
[    7.871769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

However, these messages do not signify regressions. It is a result of
properly adding address ranges within the global address list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011
Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/acpica/dsopcode.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -452,6 +452,10 @@ acpi_ds_eval_region_operands(struct acpi
 			  ACPI_FORMAT_UINT64(obj_desc->region.address),
 			  obj_desc->region.length));
 
+	status = acpi_ut_add_address_range(obj_desc->region.space_id,
+					   obj_desc->region.address,
+					   obj_desc->region.length, node);
+
 	/* Now the address and length are valid for this opregion */
 
 	obj_desc->region.flags |= AOPOBJ_DATA_VALID;

[PATCH 4.9 006/141] ipmi: Fix timer race with module unload

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Glauber <jglauber@cavium.com>

commit 0711e8c1b4572d076264e71b0002d223f2666ed7 upstream.

Please note that below oops is from an older kernel, but the same
race seems to be present in the upstream kernel too.

---8<---

The following panic was encountered during removing the ipmi_ssif
module:

[ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090
[ 526.360464] Mem abort info:
[ 526.363257] ESR = 0x86000007
[ 526.366304] Exception class = IABT (current EL), IL = 32 bits
[ 526.372221] SET = 0, FnV = 0
[ 526.375269] EA = 0, S1PTW = 0
[ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416
[ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000
[ 526.396141] Internal error: Oops: 86000007 [#1] SMP
[ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif]
[ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1
[ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018
[ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO)
[ 526.489713] pc : 0xffff000006923090
[ 526.493198] lr : call_timer_fn+0x34/0x178
[ 526.497194] sp : ffff000009b0bdd0
[ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082
[ 526.505796] x27: 0000000000000002 x26: ffff000009515188
[ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018
[ 526.516396] x23: ffff000009519660 x22: dead000000000200
[ 526.521696] x21: ffff000006923090 x20: 0000000000000100
[ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000
[ 526.532295] x17: 000000000000000e x16: 0000000000000007
[ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c
[ 526.542894] x13: 0000000000000000 x12: 0000000000000000
[ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88
[ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005
[ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020
[ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20
[ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40
[ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40
[ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc)
[ 526.586854] Call trace:
[ 526.589289] 0xffff000006923090
[ 526.592419] expire_timers+0xc8/0x130
[ 526.596070] run_timer_softirq+0xec/0x1b0
[ 526.600070] __do_softirq+0x134/0x328
[ 526.603726] irq_exit+0xc8/0xe0
[ 526.606857] __handle_domain_irq+0x6c/0xc0
[ 526.610941] gic_handle_irq+0x84/0x188
[ 526.614679] el1_irq+0xe8/0x180
[ 526.617822] cpuidle_enter_state+0xa0/0x328
[ 526.621993] cpuidle_enter+0x34/0x48
[ 526.625564] call_cpuidle+0x44/0x70
[ 526.629040] do_idle+0x1b8/0x1f0
[ 526.632256] cpu_startup_entry+0x2c/0x30
[ 526.636174] secondary_start_kernel+0x11c/0x130
[ 526.640694] Code: bad PC value
[ 526.643800] ---[ end trace d020b0b8417c2498 ]---
[ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt
[ 526.654778] SMP: stopping secondary CPUs
[ 526.658734] Kernel Offset: disabled
[ 526.662211] CPU features: 0x5800c38
[ 526.665688] Memory Limit: none
[ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

Prevent mod_timer from arming a timer that was already removed by
del_timer during module unload.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Cc: <stable@vger.kernel.org> # 3.19
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ipmi/ipmi_ssif.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -617,8 +617,9 @@ static void msg_done_handler(struct ssif
 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
 			ssif_info->waiting_alert = true;
 			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
-			mod_timer(&ssif_info->retry_timer,
-				  jiffies + SSIF_MSG_JIFFIES);
+			if (!ssif_info->stopping)
+				mod_timer(&ssif_info->retry_timer,
+					  jiffies + SSIF_MSG_JIFFIES);
 			ipmi_ssif_unlock_cond(ssif_info, flags);
 			return;
 		}
@@ -950,8 +951,9 @@ static void msg_written_handler(struct s
 			ssif_info->waiting_alert = true;
 			ssif_info->retries_left = SSIF_RECV_RETRIES;
 			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
-			mod_timer(&ssif_info->retry_timer,
-				  jiffies + SSIF_MSG_PART_JIFFIES);
+			if (!ssif_info->stopping)
+				mod_timer(&ssif_info->retry_timer,
+					  jiffies + SSIF_MSG_PART_JIFFIES);
 			ipmi_ssif_unlock_cond(ssif_info, flags);
 		}
 	}

[PATCH 4.9 007/141] parisc: Fix address in HPMC IVA

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John David Anglin <dave.anglin@bell.net>

commit 1138b6718ff74d2a934459643e3754423d23b5e2 upstream.

Helge noticed that the address of the os_hpmc handler was not being
correctly calculated in the hpmc macro.  As a result, PDCE_CHECK would
fail to call os_hpmc:

<Cpu2> e800009802e00000  0000000000000000  CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000  8040004000000000  CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> f600105e02e00000  fffffff0f0c00000  CC_MC_HPMC_MONARCH_SELECTED
<Cpu2> 140003b202e00000  000000000000000b  CC_ERR_HPMC_STATE_ENTRY
<Cpu2> 5600100b02e00000  00000000000001a0  CC_MC_OS_HPMC_LEN_ERR
<Cpu2> 5600106402e00000  fffffff0f0438e70  CC_MC_BR_TO_OS_HPMC_FAILED
<Cpu2> e800009802e00000  0000000000000000  CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000  8040004000000000  CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> 4000109f02e00000  0000000000000000  CC_MC_HPMC_INITIATED
<Cpu2> 4000101902e00000  0000000000000000  CC_MC_MULTIPLE_HPMCS
<Cpu2> 030010d502e00000  0000000000000000  CC_CPU_STOP

The address problem can be seen by dumping the fault vector:

0000000040159000 <fault_vector_20>:
    40159000:   63 6f 77 73     stb r15,-2447(dp)
    40159004:   20 63 61 6e     ldil L%b747000,r3
    40159008:   20 66 6c 79     ldil L%-1c3b3000,r3
        ...
    40159020:   08 00 02 40     nop
    40159024:   20 6e 60 02     ldil L%15d000,r3
    40159028:   34 63 00 00     ldo 0(r3),r3
    4015902c:   e8 60 c0 02     bv,n r0(r3)
    40159030:   08 00 02 40     nop
    40159034:   00 00 00 00     break 0,0
    40159038:   c0 00 70 00     bb,*< r0,sar,40159840 <fault_vector_20+0x840>
    4015903c:   00 00 00 00     break 0,0

Location 40159038 should contain the physical address of os_hpmc:

000000004015d000 <os_hpmc>:
    4015d000:   08 1a 02 43     copy r26,r3
    4015d004:   01 c0 08 a4     mfctl iva,r4
    4015d008:   48 85 00 68     ldw 34(r4),r5

This patch moves the address setup into initialize_ivt to resolve the
above problem.  I tested the change by dumping the HPMC entry after setup:

0000000040209020:  8000240
0000000040209024: 206a2004
0000000040209028: 34630ac0
000000004020902c: e860c002
0000000040209030:  8000240
0000000040209034: 1bdddce6
0000000040209038:   15d000
000000004020903c:      1a0

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/kernel/entry.S |    2 +-
 arch/parisc/kernel/traps.c |    3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -185,7 +185,7 @@
 	bv,n	0(%r3)
 	nop
 	.word	0		/* checksum (will be patched) */
-	.word	PA(os_hpmc)	/* address of handler */
+	.word	0		/* address of handler */
 	.word	0		/* length of handler */
 	.endm
 
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -826,7 +826,8 @@ void __init initialize_ivt(const void *i
 	for (i = 0; i < 8; i++)
 	    *ivap++ = 0;
 
-	/* Compute Checksum for HPMC handler */
+	/* Setup IVA and compute checksum for HPMC handler */
+	ivap[6] = (u32)__pa(os_hpmc);
 	length = os_hpmc_size;
 	ivap[7] = length;
 

[PATCH 4.9 008/141] parisc: Fix map_pages() to not overwrite existing pte entries

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit 3c229b3f2dd8133f61bb81d3cb018be92f4bba39 upstream.

Fix a long-existing small nasty bug in the map_pages() implementation which
leads to overwriting already written pte entries with zero, *if* map_pages() is
called a second time with an end address which isn't aligned on a pmd boundry.
This happens for example if we want to remap only the text segment read/write
in order to run alternative patching on the code. Exiting the loop when we
reach the end address fixes this.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/mm/init.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -491,12 +491,8 @@ static void __init map_pages(unsigned lo
 						pte = pte_mkhuge(pte);
 				}
 
-				if (address >= end_paddr) {
-					if (force)
-						break;
-					else
-						pte_val(pte) = 0;
-				}
+				if (address >= end_paddr)
+					break;
 
 				set_pte(pg_table, pte);
 

[PATCH 4.9 009/141] ALSA: hda - Add quirk for ASUS G751 laptop

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 11ba6111160290ccd35562f4e05cec08942a6c4c upstream.

ASUS G751 requires the extra COEF initialization to make it microphone
working properly.

Reported-and-tested-by: Håvard <hovardslill@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6811,6 +6811,7 @@ enum {
 	ALC662_FIXUP_ASUS_Nx50,
 	ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	ALC668_FIXUP_ASUS_Nx51,
+	ALC668_FIXUP_ASUS_G751,
 	ALC891_FIXUP_HEADSET_MODE,
 	ALC891_FIXUP_DELL_MIC_NO_PRESENCE,
 	ALC662_FIXUP_ACER_VERITON,
@@ -7077,6 +7078,14 @@ static const struct hda_fixup alc662_fix
 		.chained = true,
 		.chain_id = ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	},
+	[ALC668_FIXUP_ASUS_G751] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0xc3 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x4000 },
+			{}
+		},
+	},
 	[ALC891_FIXUP_HEADSET_MODE] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_headset_mode,
@@ -7132,6 +7141,7 @@ static const struct snd_pci_quirk alc662
 	SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50),
 	SND_PCI_QUIRK(0x1043, 0x13df, "Asus N550JX", ALC662_FIXUP_BASS_1A),
 	SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750", ALC662_FIXUP_ASUS_Nx50),
+	SND_PCI_QUIRK(0x1043, 0x12ff, "ASUS G751", ALC668_FIXUP_ASUS_G751),
 	SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_MODE4_CHMAP),
 	SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH", ALC662_FIXUP_BASS_16),
 	SND_PCI_QUIRK(0x1043, 0x177d, "ASUS N551", ALC668_FIXUP_ASUS_Nx51),

[PATCH 4.9 010/141] ALSA: hda - Fix headphone pin config for ASUS G751

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 5b7c5e1f4c36b99d0f694f38b9ad910f520cb7ef upstream.

BIOS on ASUS G751 doesn't seem to map the headphone pin (NID 0x16)
correctly.  Add a quirk to address it, as well as chaining to the
previous fix for the microphone.

Reported-by: Håvard <hovardslill@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6811,6 +6811,7 @@ enum {
 	ALC662_FIXUP_ASUS_Nx50,
 	ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	ALC668_FIXUP_ASUS_Nx51,
+	ALC668_FIXUP_MIC_COEF,
 	ALC668_FIXUP_ASUS_G751,
 	ALC891_FIXUP_HEADSET_MODE,
 	ALC891_FIXUP_DELL_MIC_NO_PRESENCE,
@@ -7078,7 +7079,7 @@ static const struct hda_fixup alc662_fix
 		.chained = true,
 		.chain_id = ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	},
-	[ALC668_FIXUP_ASUS_G751] = {
+	[ALC668_FIXUP_MIC_COEF] = {
 		.type = HDA_FIXUP_VERBS,
 		.v.verbs = (const struct hda_verb[]) {
 			{ 0x20, AC_VERB_SET_COEF_INDEX, 0xc3 },
@@ -7086,6 +7087,15 @@ static const struct hda_fixup alc662_fix
 			{}
 		},
 	},
+	[ALC668_FIXUP_ASUS_G751] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x16, 0x0421101f }, /* HP */
+			{}
+		},
+		.chained = true,
+		.chain_id = ALC668_FIXUP_MIC_COEF
+	},
 	[ALC891_FIXUP_HEADSET_MODE] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_headset_mode,

[PATCH 4.9 011/141] ALSA: hda - Add mic quirk for the Lenovo G50-30 (17aa:3905)

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy Cline <jcline@redhat.com>

commit e7bb6ad5685f05685dd8a6a5eda7bfcd14d5f95b upstream.

The Lenovo G50-30, like other G50 models, has a Conexant codec that
requires a quirk for its inverted stereo dmic.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364
Reported-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Tested-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -867,6 +867,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410),
 	SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
+	SND_PCI_QUIRK(0x17aa, 0x3905, "Lenovo G50-30", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),

[PATCH 4.9 012/141] ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio pops

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Stanoev <alex@astanoev.com>

commit ac237c28d5ac1b241d58b1b7b4b9fa10efb22fb5 upstream.

The Creative Audigy SE (SB0570) card currently exhibits an audible pop
whenever playback is stopped or resumed, or during silent periods of an
audio stream. Initialise the IZD bit to the 0 to eliminate these pops.

The Infinite Zero Detection (IZD) feature on the DAC causes the output
to be shunted to Vcap after 2048 samples of silence. This discharges the
AC coupling capacitor through the output and causes the aforementioned
pop/click noise.

The behaviour of the IZD bit is described on page 15 of the WM8768GEDS
datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples
will cause all outputs to be connected directly to VCAP. This also
happens if 2048 consecutive zero input samples are applied to all 6
channels, and IZD=0. It will be removed as soon as any channel receives
a non-zero input". I believe the second sentence might be referring to
IZD=1 instead of IZD=0 given the observed behaviour of the card.

This change should make the DAC initialisation consistent with
Creative's Windows driver, as this popping persists when initialising
the card in Linux and soft rebooting into Windows, but is not present on
a cold boot to Windows.

Signed-off-by: Alex Stanoev <alex@astanoev.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/ca0106/ca0106.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -582,7 +582,7 @@
 #define SPI_PL_BIT_R_R		(2<<7)	/* right channel = right */
 #define SPI_PL_BIT_R_C		(3<<7)	/* right channel = (L+R)/2 */
 #define SPI_IZD_REG		2
-#define SPI_IZD_BIT		(1<<4)	/* infinite zero detect */
+#define SPI_IZD_BIT		(0<<4)	/* infinite zero detect */
 
 #define SPI_FMT_REG		3
 #define SPI_FMT_BIT_RJ		(0<<0)	/* right justified mode */

[PATCH 4.9 013/141] x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Kosina <jkosina@suse.cz>

commit 53c613fe6349994f023245519265999eed75957f upstream.

STIBP is a feature provided by certain Intel ucodes / CPUs. This feature
(once enabled) prevents cross-hyperthread control of decisions made by
indirect branch predictors.

Enable this feature if

- the CPU is vulnerable to spectre v2
- the CPU supports SMT and has SMT siblings online
- spectre_v2 mitigation autoselection is enabled (default)

After some previous discussion, this leaves STIBP on all the time, as wrmsr
on crossing kernel boundary is a no-no. This could perhaps later be a bit
more optimized (like disabling it in NOHZ, experiment with disabling it in
idle, etc) if needed.

Note that the synchronization of the mask manipulation via newly added
spec_ctrl_mutex is currently not strictly needed, as the only updater is
already being serialized by cpu_add_remove_lock, but let's make this a
little bit more future-proof.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc:  "WoodhouseDavid" <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc:  "SchauflerCasey" <casey.schaufler@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1809251438240.15880@cbobk.fhfr.pm
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/bugs.c |   57 ++++++++++++++++++++++++++++++++++++++++-----
 kernel/cpu.c               |   11 +++++++-
 2 files changed, 61 insertions(+), 7 deletions(-)

--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -33,12 +33,10 @@ static void __init spectre_v2_select_mit
 static void __init ssb_select_mitigation(void);
 static void __init l1tf_select_mitigation(void);
 
-/*
- * Our boot-time value of the SPEC_CTRL MSR. We read it once so that any
- * writes to SPEC_CTRL contain whatever reserved bits have been set.
- */
-u64 __ro_after_init x86_spec_ctrl_base;
+/* The base value of the SPEC_CTRL MSR that always has to be preserved. */
+u64 x86_spec_ctrl_base;
 EXPORT_SYMBOL_GPL(x86_spec_ctrl_base);
+static DEFINE_MUTEX(spec_ctrl_mutex);
 
 /*
  * The vendor and possibly platform specific bits which can be modified in
@@ -321,6 +319,46 @@ static enum spectre_v2_mitigation_cmd __
 	return cmd;
 }
 
+static bool stibp_needed(void)
+{
+	if (spectre_v2_enabled == SPECTRE_V2_NONE)
+		return false;
+
+	if (!boot_cpu_has(X86_FEATURE_STIBP))
+		return false;
+
+	return true;
+}
+
+static void update_stibp_msr(void *info)
+{
+	wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
+}
+
+void arch_smt_update(void)
+{
+	u64 mask;
+
+	if (!stibp_needed())
+		return;
+
+	mutex_lock(&spec_ctrl_mutex);
+	mask = x86_spec_ctrl_base;
+	if (cpu_smt_control == CPU_SMT_ENABLED)
+		mask |= SPEC_CTRL_STIBP;
+	else
+		mask &= ~SPEC_CTRL_STIBP;
+
+	if (mask != x86_spec_ctrl_base) {
+		pr_info("Spectre v2 cross-process SMT mitigation: %s STIBP\n",
+				cpu_smt_control == CPU_SMT_ENABLED ?
+				"Enabling" : "Disabling");
+		x86_spec_ctrl_base = mask;
+		on_each_cpu(update_stibp_msr, NULL, 1);
+	}
+	mutex_unlock(&spec_ctrl_mutex);
+}
+
 static void __init spectre_v2_select_mitigation(void)
 {
 	enum spectre_v2_mitigation_cmd cmd = spectre_v2_parse_cmdline();
@@ -405,6 +443,9 @@ retpoline_auto:
 		setup_force_cpu_cap(X86_FEATURE_USE_IBRS_FW);
 		pr_info("Enabling Restricted Speculation for firmware calls\n");
 	}
+
+	/* Enable STIBP if appropriate */
+	arch_smt_update();
 }
 
 #undef pr_fmt
@@ -797,6 +838,8 @@ static ssize_t l1tf_show_state(char *buf
 static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr,
 			       char *buf, unsigned int bug)
 {
+	int ret;
+
 	if (!boot_cpu_has_bug(bug))
 		return sprintf(buf, "Not affected\n");
 
@@ -811,10 +854,12 @@ static ssize_t cpu_show_common(struct de
 		return sprintf(buf, "Mitigation: __user pointer sanitization\n");
 
 	case X86_BUG_SPECTRE_V2:
-		return sprintf(buf, "%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled],
+		ret = sprintf(buf, "%s%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled],
 			       boot_cpu_has(X86_FEATURE_USE_IBPB) ? ", IBPB" : "",
 			       boot_cpu_has(X86_FEATURE_USE_IBRS_FW) ? ", IBRS_FW" : "",
+			       (x86_spec_ctrl_base & SPEC_CTRL_STIBP) ? ", STIBP" : "",
 			       spectre_v2_module_string());
+		return ret;
 
 	case X86_BUG_SPEC_STORE_BYPASS:
 		return sprintf(buf, "%s\n", ssb_strings[ssb_mode]);
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -1970,6 +1970,12 @@ static void cpuhp_online_cpu_device(unsi
 	kobject_uevent(&dev->kobj, KOBJ_ONLINE);
 }
 
+/*
+ * Architectures that need SMT-specific errata handling during SMT hotplug
+ * should override this.
+ */
+void __weak arch_smt_update(void) { };
+
 static int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
 {
 	int cpu, ret = 0;
@@ -1996,8 +2002,10 @@ static int cpuhp_smt_disable(enum cpuhp_
 		 */
 		cpuhp_offline_cpu_device(cpu);
 	}
-	if (!ret)
+	if (!ret) {
 		cpu_smt_control = ctrlval;
+		arch_smt_update();
+	}
 	cpu_maps_update_done();
 	return ret;
 }
@@ -2008,6 +2016,7 @@ static int cpuhp_smt_enable(void)
 
 	cpu_maps_update_begin();
 	cpu_smt_control = CPU_SMT_ENABLED;
+	arch_smt_update();
 	for_each_present_cpu(cpu) {
 		/* Skip online CPUs and CPUs on offline nodes */
 		if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))

[PATCH 4.9 014/141] x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: He Zhe <zhe.he@windriver.com>

commit ccde460b9ae5c2bd5e4742af0a7f623c2daad566 upstream.

memory_corruption_check[{_period|_size}]()'s handlers do not check input
argument before passing it to kstrtoul() or simple_strtoull(). The argument
would be a NULL pointer if each of the kernel parameters, without its
value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff73587c22 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2
[    0.000000] RIP: 0010:kstrtoull+0x2/0x10
...
[    0.000000] Call Trace
[    0.000000]  ? set_corruption_check+0x21/0x49
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds checks to prevent the panic.

Signed-off-by: He Zhe <zhe.he@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: gregkh@linuxfoundation.org
Cc: kstewart@linuxfoundation.org
Cc: pombredanne@nexb.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1534260823-87917-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/check.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -30,6 +30,11 @@ static __init int set_corruption_check(c
 	ssize_t ret;
 	unsigned long val;
 
+	if (!arg) {
+		pr_err("memory_corruption_check config string not provided\n");
+		return -EINVAL;
+	}
+
 	ret = kstrtoul(arg, 10, &val);
 	if (ret)
 		return ret;
@@ -44,6 +49,11 @@ static __init int set_corruption_check_p
 	ssize_t ret;
 	unsigned long val;
 
+	if (!arg) {
+		pr_err("memory_corruption_check_period config string not provided\n");
+		return -EINVAL;
+	}
+
 	ret = kstrtoul(arg, 10, &val);
 	if (ret)
 		return ret;
@@ -58,6 +68,11 @@ static __init int set_corruption_check_s
 	char *end;
 	unsigned size;
 
+	if (!arg) {
+		pr_err("memory_corruption_check_size config string not provided\n");
+		return -EINVAL;
+	}
+
 	size = memparse(arg, &end);
 
 	if (*end == '\0')

[PATCH 4.9 015/141] x86/speculation: Support Enhanced IBRS on future CPUs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sai Praneeth <sai.praneeth.prakhya@intel.com>

commit 706d51681d636a0c4a5ef53395ec3b803e45ed4d upstream.

Future Intel processors will support "Enhanced IBRS" which is an "always
on" mode i.e. IBRS bit in SPEC_CTRL MSR is enabled once and never
disabled.

>From the specification [1]:

 "With enhanced IBRS, the predicted targets of indirect branches
  executed cannot be controlled by software that was executed in a less
  privileged predictor mode or on another logical processor. As a
  result, software operating on a processor with enhanced IBRS need not
  use WRMSR to set IA32_SPEC_CTRL.IBRS after every transition to a more
  privileged predictor mode. Software can isolate predictor modes
  effectively simply by setting the bit once. Software need not disable
  enhanced IBRS prior to entering a sleep state such as MWAIT or HLT."

If Enhanced IBRS is supported by the processor then use it as the
preferred spectre v2 mitigation mechanism instead of Retpoline. Intel's
Retpoline white paper [2] states:

 "Retpoline is known to be an effective branch target injection (Spectre
  variant 2) mitigation on Intel processors belonging to family 6
  (enumerated by the CPUID instruction) that do not have support for
  enhanced IBRS. On processors that support enhanced IBRS, it should be
  used for mitigation instead of retpoline."

The reason why Enhanced IBRS is the recommended mitigation on processors
which support it is that these processors also support CET which
provides a defense against ROP attacks. Retpoline is very similar to ROP
techniques and might trigger false positives in the CET defense.

If Enhanced IBRS is selected as the mitigation technique for spectre v2,
the IBRS bit in SPEC_CTRL MSR is set once at boot time and never
cleared. Kernel also has to make sure that IBRS bit remains set after
VMEXIT because the guest might have cleared the bit. This is already
covered by the existing x86_spec_ctrl_set_guest() and
x86_spec_ctrl_restore_host() speculation control functions.

Enhanced IBRS still requires IBPB for full mitigation.

[1] Speculative-Execution-Side-Channel-Mitigations.pdf
[2] Retpoline-A-Branch-Target-Injection-Mitigation.pdf
Both documents are available at:
https://bugzilla.kernel.org/show_bug.cgi?id=199511

Originally-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim C Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Link: https://lkml.kernel.org/r/1533148945-24095-1-git-send-email-sai.praneeth.prakhya@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/cpufeatures.h   |    1 +
 arch/x86/include/asm/nospec-branch.h |    1 +
 arch/x86/kernel/cpu/bugs.c           |   20 ++++++++++++++++++--
 arch/x86/kernel/cpu/common.c         |    3 +++
 4 files changed, 23 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -213,6 +213,7 @@
 #define X86_FEATURE_STIBP	( 7*32+27) /* Single Thread Indirect Branch Predictors */
 #define X86_FEATURE_ZEN		( 7*32+28) /* "" CPU is AMD family 0x17 (Zen) */
 #define X86_FEATURE_L1TF_PTEINV	( 7*32+29) /* "" L1TF workaround PTE inversion */
+#define X86_FEATURE_IBRS_ENHANCED	( 7*32+30) /* Enhanced IBRS */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  ( 8*32+ 0) /* Intel TPR Shadow */
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -215,6 +215,7 @@ enum spectre_v2_mitigation {
 	SPECTRE_V2_RETPOLINE_GENERIC,
 	SPECTRE_V2_RETPOLINE_AMD,
 	SPECTRE_V2_IBRS,
+	SPECTRE_V2_IBRS_ENHANCED,
 };
 
 /* The Speculative Store Bypass disable variants */
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -137,6 +137,7 @@ static const char *spectre_v2_strings[]
 	[SPECTRE_V2_RETPOLINE_MINIMAL_AMD]	= "Vulnerable: Minimal AMD ASM retpoline",
 	[SPECTRE_V2_RETPOLINE_GENERIC]		= "Mitigation: Full generic retpoline",
 	[SPECTRE_V2_RETPOLINE_AMD]		= "Mitigation: Full AMD retpoline",
+	[SPECTRE_V2_IBRS_ENHANCED]		= "Mitigation: Enhanced IBRS",
 };
 
 #undef pr_fmt
@@ -378,6 +379,13 @@ static void __init spectre_v2_select_mit
 
 	case SPECTRE_V2_CMD_FORCE:
 	case SPECTRE_V2_CMD_AUTO:
+		if (boot_cpu_has(X86_FEATURE_IBRS_ENHANCED)) {
+			mode = SPECTRE_V2_IBRS_ENHANCED;
+			/* Force it so VMEXIT will restore correctly */
+			x86_spec_ctrl_base |= SPEC_CTRL_IBRS;
+			wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
+			goto specv2_set_mode;
+		}
 		if (IS_ENABLED(CONFIG_RETPOLINE))
 			goto retpoline_auto;
 		break;
@@ -415,6 +423,7 @@ retpoline_auto:
 		setup_force_cpu_cap(X86_FEATURE_RETPOLINE);
 	}
 
+specv2_set_mode:
 	spectre_v2_enabled = mode;
 	pr_info("%s\n", spectre_v2_strings[mode]);
 
@@ -437,9 +446,16 @@ retpoline_auto:
 
 	/*
 	 * Retpoline means the kernel is safe because it has no indirect
-	 * branches. But firmware isn't, so use IBRS to protect that.
+	 * branches. Enhanced IBRS protects firmware too, so, enable restricted
+	 * speculation around firmware calls only when Enhanced IBRS isn't
+	 * supported.
+	 *
+	 * Use "mode" to check Enhanced IBRS instead of boot_cpu_has(), because
+	 * the user might select retpoline on the kernel command line and if
+	 * the CPU supports Enhanced IBRS, kernel might un-intentionally not
+	 * enable IBRS around firmware calls.
 	 */
-	if (boot_cpu_has(X86_FEATURE_IBRS)) {
+	if (boot_cpu_has(X86_FEATURE_IBRS) && mode != SPECTRE_V2_IBRS_ENHANCED) {
 		setup_force_cpu_cap(X86_FEATURE_USE_IBRS_FW);
 		pr_info("Enabling Restricted Speculation for firmware calls\n");
 	}
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -959,6 +959,9 @@ static void __init cpu_set_bug_bits(stru
 	setup_force_cpu_bug(X86_BUG_SPECTRE_V1);
 	setup_force_cpu_bug(X86_BUG_SPECTRE_V2);
 
+	if (ia32_cap & ARCH_CAP_IBRS_ALL)
+		setup_force_cpu_cap(X86_FEATURE_IBRS_ENHANCED);
+
 	if (x86_match_cpu(cpu_no_meltdown))
 		return;
 

[PATCH 4.9 016/141] bpf: do not blindly change rlimit in reuseport net selftest

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 262f9d811c7608f1e74258ceecfe1fa213bdf912 ]

If the current process has unlimited RLIMIT_MEMLOCK,
we should should leave it as is.

Fixes: 941ff6f11c02 ("bpf: fix rlimit in reuseport net selftest")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/reuseport_bpf.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/tools/testing/selftests/net/reuseport_bpf.c
+++ b/tools/testing/selftests/net/reuseport_bpf.c
@@ -437,14 +437,19 @@ void enable_fastopen(void)
 	}
 }
 
-static struct rlimit rlim_old, rlim_new;
+static struct rlimit rlim_old;
 
 static  __attribute__((constructor)) void main_ctor(void)
 {
 	getrlimit(RLIMIT_MEMLOCK, &rlim_old);
-	rlim_new.rlim_cur = rlim_old.rlim_cur + (1UL << 20);
-	rlim_new.rlim_max = rlim_old.rlim_max + (1UL << 20);
-	setrlimit(RLIMIT_MEMLOCK, &rlim_new);
+
+	if (rlim_old.rlim_cur != RLIM_INFINITY) {
+		struct rlimit rlim_new;
+
+		rlim_new.rlim_cur = rlim_old.rlim_cur + (1UL << 20);
+		rlim_new.rlim_max = rlim_old.rlim_max + (1UL << 20);
+		setrlimit(RLIMIT_MEMLOCK, &rlim_new);
+	}
 }
 
 static __attribute__((destructor)) void main_dtor(void)

[PATCH 4.9 017/141] Revert "perf tools: Fix PMU term format max value calculation"

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@kernel.org>

[ Upstream commit 1b9caa10b31dda0866f4028e4bfb923fb6e4072f ]

This reverts commit ac0e2cd555373ae6f8f3a3ad3fbbf5b6d1e7aaaa.

Michael reported an issue with oversized terms values assignment
and I noticed there was actually a misunderstanding of the max
value check in the past.

The above commit's changelog says:

  If bit 21 is set, there is parsing issues as below.

    $ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/
    event syntax error: '..pi_0/event=0x200002,umask=0x8/'
                                      \___ value too big for format, maximum is 511

But there's no issue there, because the event value is distributed
along the value defined by the format. Even if the format defines
separated bit, the value is treated as a continual number, which
should follow the format definition.

In above case it's 9-bit value with last bit separated:
  $ cat uncore_qpi_0/format/event
  config:0-7,21

Hence the value 0x200002 is correctly reported as format violation,
because it exceeds 9 bits. It should have been 0x102 instead, which
sets the 9th bit - the bit 21 of the format.

  $ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/
  Using CPUID GenuineIntel-6-2D
  ...
  ------------------------------------------------------------
  perf_event_attr:
    type                             10
    size                             112
    config                           0x200802
    sample_type                      IDENTIFIER
  ...

Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ac0e2cd55537 ("perf tools: Fix PMU term format max value calculation")
Link: http://lkml.kernel.org/r/20181003072046.29276-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/pmu.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -685,13 +685,14 @@ static void pmu_format_value(unsigned lo
 
 static __u64 pmu_format_max_value(const unsigned long *format)
 {
-	__u64 w = 0;
-	int fbit;
+	int w;
 
-	for_each_set_bit(fbit, format, PERF_PMU_FORMAT_BITS)
-		w |= (1ULL << fbit);
-
-	return w;
+	w = bitmap_weight(format, PERF_PMU_FORMAT_BITS);
+	if (!w)
+		return 0;
+	if (w < 64)
+		return (1ULL << w) - 1;
+	return -1;
 }
 
 /*

[PATCH 4.9 018/141] xfrm: policy: use hlist rcu variants on insert

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 9dffff200fd178f11dd50eb1fd8ccd0650c9284e ]

bydst table/list lookups use rcu, so insertions must use rcu versions.

Fixes: a7c44247f704e ("xfrm: policy: make xfrm_policy_lookup_bytype lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/xfrm/xfrm_policy.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -659,9 +659,9 @@ static void xfrm_hash_rebuild(struct wor
 				break;
 		}
 		if (newpos)
-			hlist_add_behind(&policy->bydst, newpos);
+			hlist_add_behind_rcu(&policy->bydst, newpos);
 		else
-			hlist_add_head(&policy->bydst, chain);
+			hlist_add_head_rcu(&policy->bydst, chain);
 	}
 
 	spin_unlock_bh(&net->xfrm.xfrm_policy_lock);
@@ -800,9 +800,9 @@ int xfrm_policy_insert(int dir, struct x
 			break;
 	}
 	if (newpos)
-		hlist_add_behind(&policy->bydst, newpos);
+		hlist_add_behind_rcu(&policy->bydst, newpos);
 	else
-		hlist_add_head(&policy->bydst, chain);
+		hlist_add_head_rcu(&policy->bydst, chain);
 	__xfrm_policy_link(policy, dir);
 	atomic_inc(&net->xfrm.flow_cache_genid);
 

[PATCH 4.9 019/141] sparc: Fix single-pcr perf event counter management.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit cfdc3170d214046b9509183fe9b9544dc644d40b ]

It is important to clear the hw->state value for non-stopped events
when they are added into the PMU.  Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set.  This breaks 'perf stat' and similar use cases, causing all the
events to show zero.

This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs().  calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value.  So we have to add explicit
hw->state handling there.

Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.

Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/kernel/perf_event.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -926,6 +926,8 @@ static void read_in_all_counters(struct
 			sparc_perf_event_update(cp, &cp->hw,
 						cpuc->current_idx[i]);
 			cpuc->current_idx[i] = PIC_NO_INDEX;
+			if (cp->hw.state & PERF_HES_STOPPED)
+				cp->hw.state |= PERF_HES_ARCH;
 		}
 	}
 }
@@ -958,10 +960,12 @@ static void calculate_single_pcr(struct
 
 		enc = perf_event_get_enc(cpuc->events[i]);
 		cpuc->pcr[0] &= ~mask_for_index(idx);
-		if (hwc->state & PERF_HES_STOPPED)
+		if (hwc->state & PERF_HES_ARCH) {
 			cpuc->pcr[0] |= nop_for_index(idx);
-		else
+		} else {
 			cpuc->pcr[0] |= event_encoding(enc, idx);
+			hwc->state = 0;
+		}
 	}
 out:
 	cpuc->pcr[0] |= cpuc->event[0]->hw.config_base;
@@ -987,6 +991,9 @@ static void calculate_multiple_pcrs(stru
 
 		cpuc->current_idx[i] = idx;
 
+		if (cp->hw.state & PERF_HES_ARCH)
+			continue;
+
 		sparc_pmu_start(cp, PERF_EF_RELOAD);
 	}
 out:
@@ -1078,6 +1085,8 @@ static void sparc_pmu_start(struct perf_
 	event->hw.state = 0;
 
 	sparc_pmu_enable_event(cpuc, &event->hw, idx);
+
+	perf_event_update_userpage(event);
 }
 
 static void sparc_pmu_stop(struct perf_event *event, int flags)
@@ -1370,9 +1379,9 @@ static int sparc_pmu_add(struct perf_eve
 	cpuc->events[n0] = event->hw.event_base;
 	cpuc->current_idx[n0] = PIC_NO_INDEX;
 
-	event->hw.state = PERF_HES_UPTODATE;
+	event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
 	if (!(ef_flags & PERF_EF_START))
-		event->hw.state |= PERF_HES_STOPPED;
+		event->hw.state |= PERF_HES_ARCH;
 
 	/*
 	 * If group events scheduling transaction was started,

[PATCH 4.9 020/141] sparc64: Make proc_id signed.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit b3e1eb8e7ac9aaa283989496651d99267c4cad6c ]

So that when it is unset, ie. '-1', userspace can see it
properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/include/asm/cpudata_64.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sparc/include/asm/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -27,7 +27,7 @@ typedef struct {
 	unsigned short	sock_id;	/* physical package */
 	unsigned short	core_id;
 	unsigned short  max_cache_id;	/* groupings of highest shared cache */
-	unsigned short	proc_id;	/* strand (aka HW thread) id */
+	signed short	proc_id;	/* strand (aka HW thread) id */
 } cpuinfo_sparc;
 
 DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);

[PATCH 4.9 021/141] sched/fair: Fix the min_vruntime update logic in dequeue_entity()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Song Muchun <smuchun@gmail.com>

[ Upstream commit 9845c49cc9bbb317a0bc9e9cf78d8e09d54c9af0 ]

The comment and the code around the update_min_vruntime() call in
dequeue_entity() are not in agreement.

>From commit:

  b60205c7c558 ("sched/fair: Fix min_vruntime tracking")

I think that we want to update min_vruntime when a task is sleeping/migrating.
So, the check is inverted there - fix it.

Signed-off-by: Song Muchun <smuchun@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b60205c7c558 ("sched/fair: Fix min_vruntime tracking")
Link: http://lkml.kernel.org/r/20181014112612.2614-1-smuchun@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/fair.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3502,7 +3502,7 @@ dequeue_entity(struct cfs_rq *cfs_rq, st
 	 * put back on, and if we advance min_vruntime, we'll be placed back
 	 * further than we started -- ie. we'll be penalized.
 	 */
-	if ((flags & (DEQUEUE_SAVE | DEQUEUE_MOVE)) == DEQUEUE_SAVE)
+	if ((flags & (DEQUEUE_SAVE | DEQUEUE_MOVE)) != DEQUEUE_SAVE)
 		update_min_vruntime(cfs_rq);
 }
 

[PATCH 4.9 022/141] perf cpu_map: Align cpu map synthesized events properly.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Miller <davem@davemloft.net>

[ Upstream commit 0ed149cf5239cc6e7e65bf00f769e8f1e91076c0 ]

The size of the resulting cpu map can be smaller than a multiple of
sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event
will not be aligned properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: 6c872901af07 ("perf cpu_map: Add cpu_map event synthesize function")
Link: http://lkml.kernel.org/r/20181011.224655.716771175766946817.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/event.c |    1 +
 1 file changed, 1 insertion(+)

--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -839,6 +839,7 @@ void *cpu_map_data__alloc(struct cpu_map
 	}
 
 	*size += sizeof(struct cpu_map_data);
+	*size = PERF_ALIGN(*size, sizeof(u64));
 	return zalloc(*size);
 }
 

[PATCH 4.9 023/141] x86/fpu: Remove second definition of fpu in __fpu__restore_sig()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 6aa676761d4c1acfa31320e55fa1f83f3fcbbc7a ]

Commit:

  c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")

introduced the 'fpu' variable at top of __restore_xstate_sig(),
which now shadows the other definition:

  arch/x86/kernel/fpu/signal.c:318:28: warning: symbol 'fpu' shadows an earlier one
  arch/x86/kernel/fpu/signal.c:271:20: originally declared here

Remove the shadowed definition of 'fpu', as the two definitions are the same.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")
Link: http://lkml.kernel.org/r/20181016202525.29437-3-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/fpu/signal.c |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -309,7 +309,6 @@ static int __fpu__restore_sig(void __use
 		 * thread's fpu state, reconstruct fxstate from the fsave
 		 * header. Sanitize the copied state etc.
 		 */
-		struct fpu *fpu = &tsk->thread.fpu;
 		struct user_i387_ia32_struct env;
 		int err = 0;
 

[PATCH 4.9 024/141] net: qla3xxx: Remove overflowing shift statement

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 8c3bf9b62b667456a57aefcf1689e826df146159 ]

Clang currently warns:

drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
                    ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
                      ~~~~~~~~~~~~~~ ^  ~~
1 warning generated.

The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in 64424509440,
well above UINT_MAX.

Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.

Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -380,8 +380,6 @@ static void fm93c56a_select(struct ql3_a
 
 	qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_1;
 	ql_write_nvram_reg(qdev, spir, ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
-	ql_write_nvram_reg(qdev, spir,
-			   ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
 }
 
 /*

[PATCH 4.9 025/141] selftests: ftrace: Add synthetic event syntax testcase

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit ba0e41ca81b935b958006c7120466e2217357827 ]

Add a testcase to check the syntax and field types for
synthetic_events interface.

Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox

Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-syntax.tc |   80 ++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-syntax.tc

--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-syntax.tc
@@ -0,0 +1,80 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event trigger - test synthetic_events syntax parser
+
+do_reset() {
+    reset_trigger
+    echo > set_event
+    clear_trace
+}
+
+fail() { #msg
+    do_reset
+    echo $1
+    exit_fail
+}
+
+if [ ! -f set_event ]; then
+    echo "event tracing is not supported"
+    exit_unsupported
+fi
+
+if [ ! -f synthetic_events ]; then
+    echo "synthetic event is not supported"
+    exit_unsupported
+fi
+
+reset_tracer
+do_reset
+
+echo "Test synthetic_events syntax parser"
+
+echo > synthetic_events
+
+# synthetic event must have a field
+! echo "myevent" >> synthetic_events
+echo "myevent u64 var1" >> synthetic_events
+
+# synthetic event must be found in synthetic_events
+grep "myevent[[:space:]]u64 var1" synthetic_events
+
+# it is not possible to add same name event
+! echo "myevent u64 var2" >> synthetic_events
+
+# Non-append open will cleanup all events and add new one
+echo "myevent u64 var2" > synthetic_events
+
+# multiple fields with different spaces
+echo "myevent u64 var1; u64 var2;" > synthetic_events
+grep "myevent[[:space:]]u64 var1; u64 var2" synthetic_events
+echo "myevent u64 var1 ; u64 var2 ;" > synthetic_events
+grep "myevent[[:space:]]u64 var1; u64 var2" synthetic_events
+echo "myevent u64 var1 ;u64 var2" > synthetic_events
+grep "myevent[[:space:]]u64 var1; u64 var2" synthetic_events
+
+# test field types
+echo "myevent u32 var" > synthetic_events
+echo "myevent u16 var" > synthetic_events
+echo "myevent u8 var" > synthetic_events
+echo "myevent s64 var" > synthetic_events
+echo "myevent s32 var" > synthetic_events
+echo "myevent s16 var" > synthetic_events
+echo "myevent s8 var" > synthetic_events
+
+echo "myevent char var" > synthetic_events
+echo "myevent int var" > synthetic_events
+echo "myevent long var" > synthetic_events
+echo "myevent pid_t var" > synthetic_events
+
+echo "myevent unsigned char var" > synthetic_events
+echo "myevent unsigned int var" > synthetic_events
+echo "myevent unsigned long var" > synthetic_events
+grep "myevent[[:space:]]unsigned long var" synthetic_events
+
+# test string type
+echo "myevent char var[10]" > synthetic_events
+grep "myevent[[:space:]]char\[10\] var" synthetic_events
+
+do_reset
+
+exit 0

[PATCH 4.9 026/141] i2c: rcar: cleanup DMA for all kinds of failure

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 31d86033a0749a0463ea654130b2de5c163154f1 ]

DMA needs to be cleaned up not only on timeout, but on all errors where
it has been setup before.

Fixes: 73e8b0528346 ("i2c: rcar: add DMA support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-rcar.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -723,8 +723,12 @@ static int rcar_i2c_master_xfer(struct i
 
 	time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE,
 				     num * adap->timeout);
-	if (!time_left) {
+
+	/* cleanup DMA if it couldn't complete properly due to an error */
+	if (priv->dma_direction != DMA_NONE)
 		rcar_i2c_cleanup_dma(priv);
+
+	if (!time_left) {
 		rcar_i2c_init(priv);
 		ret = -ETIMEDOUT;
 	} else if (priv->flags & ID_NACK) {

[PATCH 4.9 027/141] locking/lockdep: Fix debug_locks off performance problem

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Waiman Long <longman@redhat.com>

[ Upstream commit 9506a7425b094d2f1d9c877ed5a78f416669269b ]

It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.

Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks.  As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.

To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().

Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/locking/lockdep.c |    4 ++--
 lib/debug_locks.c        |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -4010,7 +4010,7 @@ void lock_contended(struct lockdep_map *
 {
 	unsigned long flags;
 
-	if (unlikely(!lock_stat))
+	if (unlikely(!lock_stat || !debug_locks))
 		return;
 
 	if (unlikely(current->lockdep_recursion))
@@ -4030,7 +4030,7 @@ void lock_acquired(struct lockdep_map *l
 {
 	unsigned long flags;
 
-	if (unlikely(!lock_stat))
+	if (unlikely(!lock_stat || !debug_locks))
 		return;
 
 	if (unlikely(current->lockdep_recursion))
--- a/lib/debug_locks.c
+++ b/lib/debug_locks.c
@@ -37,7 +37,7 @@ EXPORT_SYMBOL_GPL(debug_locks_silent);
  */
 int debug_locks_off(void)
 {
-	if (__debug_locks_off()) {
+	if (debug_locks && __debug_locks_off()) {
 		if (!debug_locks_silent) {
 			console_verbose();
 			return 1;

[PATCH 4.9 028/141] ataflop: fix error handling during setup

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

[ Upstream commit 71327f547ee3a46ec5c39fdbbd268401b2578d0e ]

Move queue allocation next to disk allocation to fix a couple of issues:

- If add_disk() hasn't been called, we should clear disk->queue before
  calling put_disk().
- If we fail to allocate a request queue, we still need to put all of
  the disks, not just the ones that we allocated queues for.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ataflop.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1933,6 +1933,11 @@ static int __init atari_floppy_init (voi
 		unit[i].disk = alloc_disk(1);
 		if (!unit[i].disk)
 			goto Enomem;
+
+		unit[i].disk->queue = blk_init_queue(do_fd_request,
+						     &ataflop_lock);
+		if (!unit[i].disk->queue)
+			goto Enomem;
 	}
 
 	if (UseTrackbuffer < 0)
@@ -1964,10 +1969,6 @@ static int __init atari_floppy_init (voi
 		sprintf(unit[i].disk->disk_name, "fd%d", i);
 		unit[i].disk->fops = &floppy_fops;
 		unit[i].disk->private_data = &unit[i];
-		unit[i].disk->queue = blk_init_queue(do_fd_request,
-					&ataflop_lock);
-		if (!unit[i].disk->queue)
-			goto Enomem;
 		set_capacity(unit[i].disk, MAX_DISK_SIZE * 2);
 		add_disk(unit[i].disk);
 	}
@@ -1982,13 +1983,17 @@ static int __init atari_floppy_init (voi
 
 	return 0;
 Enomem:
-	while (i--) {
-		struct request_queue *q = unit[i].disk->queue;
+	do {
+		struct gendisk *disk = unit[i].disk;
 
-		put_disk(unit[i].disk);
-		if (q)
-			blk_cleanup_queue(q);
-	}
+		if (disk) {
+			if (disk->queue) {
+				blk_cleanup_queue(disk->queue);
+				disk->queue = NULL;
+			}
+			put_disk(unit[i].disk);
+		}
+	} while (i--);
 
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 	return -ENOMEM;

[PATCH 4.9 029/141] swim: fix cleanup on setup error

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

[ Upstream commit 1448a2a5360ae06f25e2edc61ae070dff5c0beb4 ]

If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/swim.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -868,8 +868,17 @@ static int swim_floppy_init(struct swim_
 
 exit_put_disks:
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
-	while (drive--)
-		put_disk(swd->unit[drive].disk);
+	do {
+		struct gendisk *disk = swd->unit[drive].disk;
+
+		if (disk) {
+			if (disk->queue) {
+				blk_cleanup_queue(disk->queue);
+				disk->queue = NULL;
+			}
+			put_disk(disk);
+		}
+	} while (drive--);
 	return err;
 }
 

[PATCH 4.9 030/141] tun: Consistently configure generic netdev params via rtnetlink

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Serhey Popovych <serhe.popovych@gmail.com>

[ Upstream commit df52eab23d703142c766ac00bdb8db19d71238d0 ]

Configuring generic network device parameters on tun will fail in
presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute
since tun_validate() always return failure.

This can be visualized with following ip-link(8) command sequences:

  # ip link set dev tun0 group 100
  # ip link set dev tun0 group 100 type tun
  RTNETLINK answers: Invalid argument

with contrast to dummy and veth drivers:

  # ip link set dev dummy0 group 100
  # ip link set dev dummy0 type dummy

  # ip link set dev veth0 group 100
  # ip link set dev veth0 group 100 type veth

Fix by returning zero in tun_validate() when @data is NULL that is
always in case since rtnl_link_ops->maxtype is zero in tun driver.

Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/tun.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1570,6 +1570,8 @@ static void tun_setup(struct net_device
  */
 static int tun_validate(struct nlattr *tb[], struct nlattr *data[])
 {
+	if (!data)
+		return 0;
 	return -EINVAL;
 }
 

[PATCH 4.9 031/141] s390/sthyi: Fix machine name validity indication

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Janosch Frank <frankja@linux.ibm.com>

[ Upstream commit b5130dc2224d1881f24224c0590c6d97f2168d6a ]

When running as a level 3 guest with no host provided sthyi support
sclp_ocf_cpc_name_copy() will only return zeroes. Zeroes are not a
valid group name, so let's not indicate that the group name field is
valid.

Also the group name is not dependent on stsi, let's not return based
on stsi before setting it.

Fixes: 95ca2cb57985 ("KVM: s390: Add sthyi emulation")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kvm/sthyi.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/arch/s390/kvm/sthyi.c
+++ b/arch/s390/kvm/sthyi.c
@@ -174,17 +174,19 @@ static void fill_hdr(struct sthyi_sctns
 static void fill_stsi_mac(struct sthyi_sctns *sctns,
 			  struct sysinfo_1_1_1 *sysinfo)
 {
+	sclp_ocf_cpc_name_copy(sctns->mac.infmname);
+	if (*(u64 *)sctns->mac.infmname != 0)
+		sctns->mac.infmval1 |= MAC_NAME_VLD;
+
 	if (stsi(sysinfo, 1, 1, 1))
 		return;
 
-	sclp_ocf_cpc_name_copy(sctns->mac.infmname);
-
 	memcpy(sctns->mac.infmtype, sysinfo->type, sizeof(sctns->mac.infmtype));
 	memcpy(sctns->mac.infmmanu, sysinfo->manufacturer, sizeof(sctns->mac.infmmanu));
 	memcpy(sctns->mac.infmpman, sysinfo->plant, sizeof(sctns->mac.infmpman));
 	memcpy(sctns->mac.infmseq, sysinfo->sequence, sizeof(sctns->mac.infmseq));
 
-	sctns->mac.infmval1 |= MAC_ID_VLD | MAC_NAME_VLD;
+	sctns->mac.infmval1 |= MAC_ID_VLD;
 }
 
 static void fill_stsi_par(struct sthyi_sctns *sctns,

[PATCH 4.9 032/141] hwmon: (pwm-fan) Set fan speed to 0 on suspend

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 95dcd64bc5a27080beaa344edfe5bdcca3d2e7dc ]

Technically this is not required because disabling the PWM should be
enough. However, when support for atomic operations was implemented in
the PWM subsystem, only actual changes to the PWM channel are applied
during pwm_config(), which means that during after resume from suspend
the old settings won't be applied.

One possible solution is for the PWM driver to implement its own PM
operations such that settings from before suspend get applied on resume.
This has the disadvantage of completely ignoring any particular ordering
requirements that PWM user drivers might have, so it is best to leave it
up to the user drivers to apply the settings that they want at the
appropriate time.

Another way to solve this would be to read back the current state of the
PWM at the time of resume. That way, in case the configuration was lost
during suspend, applying the old settings in PWM user drivers would
actually get them applied because they differ from the current settings.
However, not all PWM drivers support reading the hardware state, and not
all hardware may support it.

The best workaround at this point seems to be to let PWM user drivers
tell the PWM subsystem that the PWM is turned off by, in addition to
disabling it, also setting the duty cycle to 0. This causes the resume
operation to apply a configuration that is different from the current
configuration, resulting in the proper state from before suspend getting
restored.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/pwm-fan.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -306,9 +306,19 @@ static int pwm_fan_remove(struct platfor
 static int pwm_fan_suspend(struct device *dev)
 {
 	struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
+	struct pwm_args args;
+	int ret;
+
+	pwm_get_args(ctx->pwm, &args);
+
+	if (ctx->pwm_value) {
+		ret = pwm_config(ctx->pwm, 0, args.period);
+		if (ret < 0)
+			return ret;
 
-	if (ctx->pwm_value)
 		pwm_disable(ctx->pwm);
+	}
+
 	return 0;
 }
 

[PATCH 4.9 033/141] perf tools: Free temporary sys string in read_event_files()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sanskriti Sharma <sansharm@redhat.com>

[ Upstream commit 1e44224fb0528b4c0cc176bde2bb31e9127eb14b ]

For each system in a given pevent, read_event_files() reads in a
temporary 'sys' string.  Be sure to free this string before moving onto
to the next system and/or leaving read_event_files().

Fixes the following coverity complaints:

  Error: RESOURCE_LEAK (CWE-772):

  tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting
  "sys" in "sys = read_string()" leaks the storage that "sys" points to.

  tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys"
  going out of scope leaks the storage it points to.

Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-6-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/trace-event-read.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -334,9 +334,12 @@ static int read_event_files(struct peven
 		for (x=0; x < count; x++) {
 			size = read8(pevent);
 			ret = read_event_file(pevent, sys, size);
-			if (ret)
+			if (ret) {
+				free(sys);
 				return ret;
+			}
 		}
+		free(sys);
 	}
 	return 0;
 }

[PATCH 4.9 034/141] perf tools: Cleanup trace-event-info tdata leak

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sanskriti Sharma <sansharm@redhat.com>

[ Upstream commit faedbf3fd19f2511a39397f76359e4cc6ee93072 ]

Free tracing_data structure in tracing_data_get() error paths.

Fixes the following coverity complaint:

  Error: RESOURCE_LEAK (CWE-772):
  leaked_storage: Variable "tdata" going out of scope leaks the storage

Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-3-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/trace-event-info.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -507,12 +507,14 @@ struct tracing_data *tracing_data_get(st
 			 "/tmp/perf-XXXXXX");
 		if (!mkstemp(tdata->temp_file)) {
 			pr_debug("Can't make temp file");
+			free(tdata);
 			return NULL;
 		}
 
 		temp_fd = open(tdata->temp_file, O_RDWR);
 		if (temp_fd < 0) {
 			pr_debug("Can't read '%s'", tdata->temp_file);
+			free(tdata);
 			return NULL;
 		}
 

[PATCH 4.9 035/141] perf strbuf: Match va_{add,copy} with va_end

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sanskriti Sharma <sansharm@redhat.com>

[ Upstream commit ce49d8436cffa9b7a6a5f110879d53e89dbc6746 ]

Ensure that all code paths in strbuf_addv() call va_end() on the
ap_saved copy that was made.

Fixes the following coverity complaint:

  Error: VARARGS (CWE-237): [#def683]
  tools/perf/util/strbuf.c:106: missing_va_end: va_end was not called
  for "ap_saved".

Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-2-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/strbuf.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -105,19 +105,25 @@ static int strbuf_addv(struct strbuf *sb
 
 	va_copy(ap_saved, ap);
 	len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
-	if (len < 0)
+	if (len < 0) {
+		va_end(ap_saved);
 		return len;
+	}
 	if (len > strbuf_avail(sb)) {
 		ret = strbuf_grow(sb, len);
-		if (ret)
+		if (ret) {
+			va_end(ap_saved);
 			return ret;
+		}
 		len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap_saved);
 		va_end(ap_saved);
 		if (len > strbuf_avail(sb)) {
 			pr_debug("this should not happen, your vsnprintf is broken");
+			va_end(ap_saved);
 			return -EINVAL;
 		}
 	}
+	va_end(ap_saved);
 	return strbuf_setlen(sb, sb->len + len);
 }
 

[PATCH 4.9 036/141] cpupower: Fix coredump on VMWare

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Prarit Bhargava <prarit@redhat.com>

[ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]

cpupower crashes on VMWare guests.  The guests have the AMD PStateDef MSR
(0xC0010064 + state number) set to zero.  As a result fid and did are zero
and the crash occurs because of a divide by zero (cof = fid/did).  This
can be prevented by checking the enable bit in the PStateDef MSR before
calculating cof.  By doing this the value of pstate[i] remains zero and
the value can be tested before displaying the active Pstates.

Check the enable bit in the PstateDef register for all supported families
and only print out enabled Pstates.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/power/cpupower/utils/cpufreq-info.c |    2 ++
 tools/power/cpupower/utils/helpers/amd.c  |    5 +++++
 2 files changed, 7 insertions(+)

--- a/tools/power/cpupower/utils/cpufreq-info.c
+++ b/tools/power/cpupower/utils/cpufreq-info.c
@@ -202,6 +202,8 @@ static int get_boost_mode(unsigned int c
 		printf(_("    Boost States: %d\n"), b_states);
 		printf(_("    Total States: %d\n"), pstate_no);
 		for (i = 0; i < pstate_no; i++) {
+			if (!pstates[i])
+				continue;
 			if (i < b_states)
 				printf(_("    Pstate-Pb%d: %luMHz (boost state)"
 					 "\n"), i, pstates[i]);
--- a/tools/power/cpupower/utils/helpers/amd.c
+++ b/tools/power/cpupower/utils/helpers/amd.c
@@ -103,6 +103,11 @@ int decode_pstates(unsigned int cpu, uns
 		}
 		if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val))
 			return -1;
+		if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
+			continue;
+		else if (!pstate.bits.en)
+			continue;
+
 		pstates[i] = get_cof(cpu_family, pstate);
 	}
 	*no = i;

[PATCH 4.9 037/141] mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yu Zhao <yuzhao@google.com>

[ Upstream commit 5169894982bb67486d93cc1e10151712bb86bcb6 ]

This device reports SDHCI_CLOCK_INT_STABLE even though it's not
ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading
SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the
bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 |
SDHCI_CLOCK_CARD_EN but only observed the first operand).

mmc1: Timeout waiting for hardware cmd interrupt.
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00000603
mmc1: sdhci: Blk size:  0x00000000 | Blk cnt:  0x00000000
mmc1: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000
mmc1: sdhci: Present:   0x01ff0001 | Host ctl: 0x00000001
mmc1: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x0000fa03
mmc1: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
mmc1: sdhci: Int enab:  0x00ff0083 | Sig enab: 0x00ff0083
mmc1: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps:      0x25fcc8bf | Caps_1:   0x00002077
mmc1: sdhci: Cmd:       0x00000000 | Max curr: 0x005800c8
mmc1: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
mmc1: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x00000000
mmc1: sdhci: ============================================

The problem happens during wakeup from S3. Adding a delay quirk
after power up reliably fixes the problem.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-pci-o2micro.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -334,6 +334,9 @@ int sdhci_pci_o2_probe(struct sdhci_pci_
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 		break;
 	case PCI_DEVICE_ID_O2_SEABIRD0:
+		if (chip->pdev->revision == 0x01)
+			chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
+		/* fall through */
 	case PCI_DEVICE_ID_O2_SEABIRD1:
 		/* UnLock WP */
 		ret = pci_read_config_byte(chip->pdev,

[PATCH 4.9 038/141] iwlwifi: pcie: avoid empty free RB queue

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shaul Triebitz <shaul.triebitz@intel.com>

[ Upstream commit 868a1e863f95183f00809363fefba6d4f5bcd116 ]

If all free RB queues are empty, the driver will never restock the
free RB queue.  That's because the restocking happens in the Rx flow,
and if the free queue is empty there will be no Rx.

Although there's a background worker (a.k.a. allocator) allocating
memory for RBs so that the Rx handler can restock them, the worker may
run only after the free queue has become empty (and then it is too
late for restocking as explained above).

There is a solution for that called 'emergency': If the number of used
RB's reaches half the amount of all RB's, the Rx handler will not wait
for the allocator but immediately allocate memory for the used RB's
and restock the free queue.

But, since the used RB's is per queue, it may happen that the used
RB's are spread between the queues such that the emergency check will
fail for each of the queues
(and still run out of RBs, causing the above symptom).

To fix it, move to emergency mode if the sum of *all* used RBs (for
all Rx queues) reaches half the amount of all RB's

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c |   32 +++++++++++++++++----------
 1 file changed, 21 insertions(+), 11 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1030,6 +1030,14 @@ void iwl_pcie_rx_free(struct iwl_trans *
 	kfree(trans_pcie->rxq);
 }
 
+static void iwl_pcie_rx_move_to_allocator(struct iwl_rxq *rxq,
+					  struct iwl_rb_allocator *rba)
+{
+	spin_lock(&rba->lock);
+	list_splice_tail_init(&rxq->rx_used, &rba->rbd_empty);
+	spin_unlock(&rba->lock);
+}
+
 /*
  * iwl_pcie_rx_reuse_rbd - Recycle used RBDs
  *
@@ -1061,9 +1069,7 @@ static void iwl_pcie_rx_reuse_rbd(struct
 	if ((rxq->used_count % RX_CLAIM_REQ_ALLOC) == RX_POST_REQ_ALLOC) {
 		/* Move the 2 RBDs to the allocator ownership.
 		 Allocator has another 6 from pool for the request completion*/
-		spin_lock(&rba->lock);
-		list_splice_tail_init(&rxq->rx_used, &rba->rbd_empty);
-		spin_unlock(&rba->lock);
+		iwl_pcie_rx_move_to_allocator(rxq, rba);
 
 		atomic_inc(&rba->req_pending);
 		queue_work(rba->alloc_wq, &rba->rx_alloc);
@@ -1233,10 +1239,18 @@ restart:
 		IWL_DEBUG_RX(trans, "Q %d: HW = SW = %d\n", rxq->id, r);
 
 	while (i != r) {
+		struct iwl_rb_allocator *rba = &trans_pcie->rba;
 		struct iwl_rx_mem_buffer *rxb;
-
-		if (unlikely(rxq->used_count == rxq->queue_size / 2))
+		/* number of RBDs still waiting for page allocation */
+		u32 rb_pending_alloc =
+			atomic_read(&trans_pcie->rba.req_pending) *
+			RX_CLAIM_REQ_ALLOC;
+
+		if (unlikely(rb_pending_alloc >= rxq->queue_size / 2 &&
+			     !emergency)) {
+			iwl_pcie_rx_move_to_allocator(rxq, rba);
 			emergency = true;
+		}
 
 		if (trans->cfg->mq_rx_supported) {
 			/*
@@ -1279,17 +1293,13 @@ restart:
 			iwl_pcie_rx_allocator_get(trans, rxq);
 
 		if (rxq->used_count % RX_CLAIM_REQ_ALLOC == 0 && !emergency) {
-			struct iwl_rb_allocator *rba = &trans_pcie->rba;
-
 			/* Add the remaining empty RBDs for allocator use */
-			spin_lock(&rba->lock);
-			list_splice_tail_init(&rxq->rx_used, &rba->rbd_empty);
-			spin_unlock(&rba->lock);
+			iwl_pcie_rx_move_to_allocator(rxq, rba);
 		} else if (emergency) {
 			count++;
 			if (count == 8) {
 				count = 0;
-				if (rxq->used_count < rxq->queue_size / 3)
+				if (rb_pending_alloc < rxq->queue_size / 3)
 					emergency = false;
 
 				rxq->read = i;

[PATCH 4.9 039/141] x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit d92116b800fb79a72ad26121f5011f6aa3ad94c2 ]

On OLPC XO-1, the RTC is discovered via device tree from the arch
initcall. Don't let the PC platform register another one from its device
initcall, it's not going to work:

  sysfs: cannot create duplicate filename '/devices/platform/rtc_cmos'
  CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #12
  Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014
  Call Trace:
   dump_stack+0x16/0x18
   sysfs_warn_dup+0x46/0x58
   sysfs_create_dir_ns+0x76/0x9b
   kobject_add_internal+0xed/0x209
   ? __schedule+0x3fa/0x447
   kobject_add+0x5b/0x66
   device_add+0x298/0x535
   ? insert_resource_conflict+0x2a/0x3e
   platform_device_add+0x14d/0x192
   ? io_delay_init+0x19/0x19
   platform_device_register+0x1c/0x1f
   add_rtc_cmos+0x16/0x31
   do_one_initcall+0x78/0x14a
   ? do_early_param+0x75/0x75
   kernel_init_freeable+0x152/0x1e0
   ? rest_init+0xa2/0xa2
   kernel_init+0x8/0xd5
   ret_from_fork+0x2e/0x38
  kobject_add_internal failed for rtc_cmos with -EEXIST, don't try to
    register things with the same name in the same directory.
  platform rtc_cmos: registered platform RTC device (no PNP device found)

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20181004160808.307738-1-lkundrak@v3.sk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/platform/olpc/olpc-xo1-rtc.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/x86/platform/olpc/olpc-xo1-rtc.c
+++ b/arch/x86/platform/olpc/olpc-xo1-rtc.c
@@ -16,6 +16,7 @@
 
 #include <asm/msr.h>
 #include <asm/olpc.h>
+#include <asm/x86_init.h>
 
 static void rtc_wake_on(struct device *dev)
 {
@@ -75,6 +76,8 @@ static int __init xo1_rtc_init(void)
 	if (r)
 		return r;
 
+	x86_platform.legacy.rtc = 0;
+
 	device_init_wakeup(&xo1_rtc_device.dev, 1);
 	return 0;
 }

[PATCH 4.9 040/141] cpufreq: dt: Try freeing static OPPs only if we have added them

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 51c99dd2c06b234575661fa1e0a1dea6c3ef566f ]

We can not call dev_pm_opp_of_cpumask_remove_table() freely anymore
since the latest OPP core updates as that uses reference counting to
free resources. There are cases where no static OPPs are added (using
DT) for a platform and trying to remove the OPP table may end up
decrementing refcount which is already zero and hence generating
warnings.

Lets track if we were able to add static OPPs or not and then only
remove the table based on that. Some reshuffling of code is also done to
do that.

Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/cpufreq-dt.c |   34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -32,6 +32,7 @@ struct private_data {
 	struct device *cpu_dev;
 	struct thermal_cooling_device *cdev;
 	const char *reg_name;
+	bool have_static_opps;
 };
 
 static struct freq_attr *cpufreq_dt_attr[] = {
@@ -197,6 +198,15 @@ static int cpufreq_init(struct cpufreq_p
 		}
 	}
 
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out_put_regulator;
+	}
+
+	priv->reg_name = name;
+	priv->opp_table = opp_table;
+
 	/*
 	 * Initialize OPP tables for all policy->cpus. They will be shared by
 	 * all CPUs which have marked their CPUs shared with OPP bindings.
@@ -207,7 +217,8 @@ static int cpufreq_init(struct cpufreq_p
 	 *
 	 * OPPs might be populated at runtime, don't check for error here
 	 */
-	dev_pm_opp_of_cpumask_add_table(policy->cpus);
+	if (!dev_pm_opp_of_cpumask_add_table(policy->cpus))
+		priv->have_static_opps = true;
 
 	/*
 	 * But we need OPP table to function so if it is not there let's
@@ -233,19 +244,10 @@ static int cpufreq_init(struct cpufreq_p
 				__func__, ret);
 	}
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		ret = -ENOMEM;
-		goto out_free_opp;
-	}
-
-	priv->reg_name = name;
-	priv->opp_table = opp_table;
-
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-		goto out_free_priv;
+		goto out_free_opp;
 	}
 
 	priv->cpu_dev = cpu_dev;
@@ -284,10 +286,11 @@ static int cpufreq_init(struct cpufreq_p
 
 out_free_cpufreq_table:
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-out_free_priv:
-	kfree(priv);
 out_free_opp:
-	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
+	if (priv->have_static_opps)
+		dev_pm_opp_of_cpumask_remove_table(policy->cpus);
+	kfree(priv);
+out_put_regulator:
 	if (name)
 		dev_pm_opp_put_regulator(opp_table);
 out_put_clk:
@@ -302,7 +305,8 @@ static int cpufreq_exit(struct cpufreq_p
 
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+	if (priv->have_static_opps)
+		dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
 	if (priv->reg_name)
 		dev_pm_opp_put_regulator(priv->opp_table);
 

[PATCH 4.9 041/141] Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit a357ea098c9605f60d92a66a9073f56ce25726da ]

This patch adds the device ID for the AMPAK AP6335 combo module used
in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI
chip identifies itself as BCM4339, while Bluetooth identifies itself
as BCM4335 (rev C0):

```
[    4.864248] Bluetooth: hci0: BCM: chip id 86
[    4.866388] Bluetooth: hci0: BCM: features 0x2f
[    4.889317] Bluetooth: hci0: BCM4335C0
[    4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000
[    9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268
```

Output from hciconfig:

```
hci0:	Type: Primary  Bus: UART
	BD Address: 43:39:00:00:1F:AC  ACL MTU: 1021:8  SCO MTU: 64:1
	UP RUNNING
	RX bytes:7567 acl:234 sco:0 events:386 errors:0
	TX bytes:53844 acl:77 sco:0 commands:304 errors:0
	Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
	Link policy: RSWITCH SNIFF
	Link mode: SLAVE ACCEPT
	Name: 'HUB'
	Class: 0x0c0000
	Service Classes: Rendering, Capturing
	Device Class: Miscellaneous,
	HCI Version: 4.0 (0x6)  Revision: 0x10c
	LMP Version: 4.0 (0x6)  Subversion: 0x6109
	Manufacturer: Broadcom Corporation (15)
```

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btbcm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -270,6 +270,7 @@ static const struct {
 	{ 0x4103, "BCM4330B1"	},	/* 002.001.003 */
 	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
 	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
+	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
 	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
 	{ }
 };

[PATCH 4.9 042/141] x86: boot: Fix EFI stub alignment

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

[ Upstream commit 9c1442a9d039a1a3302fa93e9a11001c5f23b624 ]

We currently align the end of the compressed image to a multiple of
16.  However, the PE-COFF header included in the EFI stub says that
the file alignment is 32 bytes, and when adding an EFI signature to
the file it must first be padded to this alignment.

sbsigntool commands warn about this:

  warning: file-aligned section .text extends beyond end of file
  warning: checksum areas are greater than image size. Invalid section table?

Worse, pesign -at least when creating a detached signature- uses the
hash of the unpadded file, resulting in an invalid signature if
padding is required.

Avoid both these problems by increasing alignment to 32 bytes when
CONFIG_EFI_STUB is enabled.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/boot/tools/build.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -390,6 +390,13 @@ int main(int argc, char ** argv)
 		die("Unable to mmap '%s': %m", argv[2]);
 	/* Number of 16-byte paragraphs, including space for a 4-byte CRC */
 	sys_size = (sz + 15 + 4) / 16;
+#ifdef CONFIG_EFI_STUB
+	/*
+	 * COFF requires minimum 32-byte alignment of sections, and
+	 * adding a signature is problematic without that alignment.
+	 */
+	sys_size = (sys_size + 1) & ~1;
+#endif
 
 	/* Patch the setup code with the appropriate size parameters */
 	buf[0x1f1] = setup_sectors-1;

[PATCH 4.9 043/141] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 69f8455f6cc78fa6cdf80d0105d7a748106271dc ]

'ret' should be returned while pmic_mpp_write_mode_ctl fails.

Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -319,6 +319,8 @@ static int pmic_mpp_set_mux(struct pinct
 	pad->function = function;
 
 	ret = pmic_mpp_write_mode_ctl(state, pad);
+	if (ret < 0)
+		return ret;
 
 	val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
 

[PATCH 4.9 044/141] brcmfmac: fix for proper support of 160MHz bandwidth

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend van Spriel <arend.vanspriel@broadcom.com>

[ Upstream commit 330994e8e8ec5d0b269a5265e6032b37e29aa336 ]

Decoding of firmware channel information was not complete for 160MHz
support. This resulted in the following warning:

  WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196
	brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
  Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ...
  CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G           O
  4.17.0-wt-testing-x64-00002-gf1bed50 #1
  Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
  Workqueue: events request_firmware_work_func
  RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
  RSP: 0018:ffffc90000047bd0 EFLAGS: 00010206
  RAX: 000000000000e832 RBX: ffff8801146fe910 RCX: ffff8801146fd3c0
  RDX: 0000000000002800 RSI: 0000000000000070 RDI: ffffc90000047c30
  RBP: ffffc90000047bd0 R08: 0000000000000000 R09: ffffffffa0798c80
  R10: ffff88012bca55e0 R11: ffff880110a4ea00 R12: ffff8801146f8000
  R13: ffffc90000047c30 R14: ffff8801146fe930 R15: ffff8801138e02e0
  FS:  0000000000000000(0000) GS:ffff88012bc80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f18ce8b8070 CR3: 000000000200a003 CR4: 00000000000206e0
  Call Trace:
   brcmf_setup_wiphybands+0x212/0x780 [brcmfmac]
   brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac]
   brcmf_attach+0x1fc/0x4b0 [brcmfmac]
   ? __kmalloc+0x13c/0x1c0
   brcmf_pcie_setup+0x99b/0xe00 [brcmfmac]
   brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac]
   request_firmware_work_func+0x36/0x60
   process_one_work+0x146/0x350
   worker_thread+0x4a/0x3b0
   kthread+0x102/0x140
   ? process_one_work+0x350/0x350
   ? kthread_bind+0x20/0x20
   ret_from_fork+0x35/0x40
  Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38
	66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f>
	0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66
  ---[ end trace 550c46682415b26d ]---
  brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50

This patch adds the missing stuff to properly handle this.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c       |   34 ++++++++++-
 drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h |    2 
 2 files changed, 35 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
@@ -77,6 +77,8 @@ static u16 d11ac_bw(enum brcmu_chan_bw b
 		return BRCMU_CHSPEC_D11AC_BW_40;
 	case BRCMU_CHAN_BW_80:
 		return BRCMU_CHSPEC_D11AC_BW_80;
+	case BRCMU_CHAN_BW_160:
+		return BRCMU_CHSPEC_D11AC_BW_160;
 	default:
 		WARN_ON(1);
 	}
@@ -190,8 +192,38 @@ static void brcmu_d11ac_decchspec(struct
 			break;
 		}
 		break;
-	case BRCMU_CHSPEC_D11AC_BW_8080:
 	case BRCMU_CHSPEC_D11AC_BW_160:
+		switch (ch->sb) {
+		case BRCMU_CHAN_SB_LLL:
+			ch->control_ch_num -= CH_70MHZ_APART;
+			break;
+		case BRCMU_CHAN_SB_LLU:
+			ch->control_ch_num -= CH_50MHZ_APART;
+			break;
+		case BRCMU_CHAN_SB_LUL:
+			ch->control_ch_num -= CH_30MHZ_APART;
+			break;
+		case BRCMU_CHAN_SB_LUU:
+			ch->control_ch_num -= CH_10MHZ_APART;
+			break;
+		case BRCMU_CHAN_SB_ULL:
+			ch->control_ch_num += CH_10MHZ_APART;
+			break;
+		case BRCMU_CHAN_SB_ULU:
+			ch->control_ch_num += CH_30MHZ_APART;
+			break;
+		case BRCMU_CHAN_SB_UUL:
+			ch->control_ch_num += CH_50MHZ_APART;
+			break;
+		case BRCMU_CHAN_SB_UUU:
+			ch->control_ch_num += CH_70MHZ_APART;
+			break;
+		default:
+			WARN_ON_ONCE(1);
+			break;
+		}
+		break;
+	case BRCMU_CHSPEC_D11AC_BW_8080:
 	default:
 		WARN_ON_ONCE(1);
 		break;
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
@@ -29,6 +29,8 @@
 #define CH_UPPER_SB			0x01
 #define CH_LOWER_SB			0x02
 #define CH_EWA_VALID			0x04
+#define CH_70MHZ_APART			14
+#define CH_50MHZ_APART			10
 #define CH_30MHZ_APART			6
 #define CH_20MHZ_APART			4
 #define CH_10MHZ_APART			2

[PATCH 4.9 045/141] kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ]

Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/kprobes.c |   27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -665,9 +665,10 @@ static void unoptimize_kprobe(struct kpr
 }
 
 /* Cancel unoptimizing for reusing */
-static void reuse_unused_kprobe(struct kprobe *ap)
+static int reuse_unused_kprobe(struct kprobe *ap)
 {
 	struct optimized_kprobe *op;
+	int ret;
 
 	BUG_ON(!kprobe_unused(ap));
 	/*
@@ -681,8 +682,12 @@ static void reuse_unused_kprobe(struct k
 	/* Enable the probe again */
 	ap->flags &= ~KPROBE_FLAG_DISABLED;
 	/* Optimize it again (remove from op->list) */
-	BUG_ON(!kprobe_optready(ap));
+	ret = kprobe_optready(ap);
+	if (ret)
+		return ret;
+
 	optimize_kprobe(ap);
+	return 0;
 }
 
 /* Remove optimized instructions */
@@ -894,11 +899,16 @@ static void __disarm_kprobe(struct kprob
 #define kprobe_disarmed(p)			kprobe_disabled(p)
 #define wait_for_kprobe_optimizer()		do {} while (0)
 
-/* There should be no unused kprobes can be reused without optimization */
-static void reuse_unused_kprobe(struct kprobe *ap)
+static int reuse_unused_kprobe(struct kprobe *ap)
 {
+	/*
+	 * If the optimized kprobe is NOT supported, the aggr kprobe is
+	 * released at the same time that the last aggregated kprobe is
+	 * unregistered.
+	 * Thus there should be no chance to reuse unused kprobe.
+	 */
 	printk(KERN_ERR "Error: There should be no unused kprobe here.\n");
-	BUG_ON(kprobe_unused(ap));
+	return -EINVAL;
 }
 
 static void free_aggr_kprobe(struct kprobe *p)
@@ -1276,9 +1286,12 @@ static int register_aggr_kprobe(struct k
 			goto out;
 		}
 		init_aggr_kprobe(ap, orig_p);
-	} else if (kprobe_unused(ap))
+	} else if (kprobe_unused(ap)) {
 		/* This probe is going to die. Rescue it */
-		reuse_unused_kprobe(ap);
+		ret = reuse_unused_kprobe(ap);
+		if (ret)
+			goto out;
+	}
 
 	if (kprobe_gone(ap)) {
 		/*

[PATCH 4.9 046/141] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 240714061c58e6b1abfb3322398a7634151c06cb ]

Bay and Cherry Trail DSTDs represent a different set of devices depending
on which OS the device think it is booting. One set of decices for Windows
and another set of devices for Android which targets the Android-x86 Linux
kernel fork (which e.g. used to have its own display driver instead of
using the i915 driver).

Which set of devices we are actually going to get is out of our control,
this is controlled by the ACPI OSID variable, which gets either set through
an EFI setup option, or sometimes is autodetected. So we need to support
both.

This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we
get for the first resp. second DMA controller on Cherry Trail devices when
OSID is set to Android.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/acpi_lpss.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -278,9 +278,11 @@ static const struct acpi_device_id acpi_
 	{ "INT33FC", },
 
 	/* Braswell LPSS devices */
+	{ "80862286", LPSS_ADDR(lpss_dma_desc) },
 	{ "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
 	{ "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
 	{ "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
+	{ "808622C0", LPSS_ADDR(lpss_dma_desc) },
 	{ "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
 
 	/* Broadwell LPSS devices */

[PATCH 4.9 047/141] pinctrl: qcom: spmi-mpp: Fix drive strength setting

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ]

It looks like we parse the drive strength setting here, but never
actually write it into the hardware to update it. Parse the setting and
then write it at the end of the pinconf setting function so that it
actually sticks in the hardware.

Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -457,7 +457,7 @@ static int pmic_mpp_config_set(struct pi
 			pad->dtest = arg;
 			break;
 		case PIN_CONFIG_DRIVE_STRENGTH:
-			arg = pad->drive_strength;
+			pad->drive_strength = arg;
 			break;
 		case PMIC_MPP_CONF_AMUX_ROUTE:
 			if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4)
@@ -504,6 +504,10 @@ static int pmic_mpp_config_set(struct pi
 	if (ret < 0)
 		return ret;
 
+	ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength);
+	if (ret < 0)
+		return ret;
+
 	val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
 
 	return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);

[PATCH 4.9 048/141] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ]

If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-mpp has the same
problem.  Let's fix it there too.

NOTE: in case it's helpful to someone reading this, the way to tell
whether to do the -EINVAL or not is to look at the PCONFDUMP for a
given attribute.  If the last element (has_arg) is false then you need
to do the -EINVAL trick.

ALSO NOTE: it seems unlikely that the values returned when we try to
get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg"
is false for that one, but I guess it's still fine to return different
values so I kept doing that.  It seems like another driver (ssbi-gpio)
uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something
similar so maybe a future change should do that here too.

Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -345,13 +345,12 @@ static int pmic_mpp_config_get(struct pi
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		arg = pad->pullup == PMIC_MPP_PULL_UP_OPEN;
+		if (pad->pullup != PMIC_MPP_PULL_UP_OPEN)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
 		switch (pad->pullup) {
-		case PMIC_MPP_PULL_UP_OPEN:
-			arg = 0;
-			break;
 		case PMIC_MPP_PULL_UP_0P6KOHM:
 			arg = 600;
 			break;
@@ -366,13 +365,17 @@ static int pmic_mpp_config_get(struct pi
 		}
 		break;
 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-		arg = !pad->is_enabled;
+		if (pad->is_enabled)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_POWER_SOURCE:
 		arg = pad->power_source;
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		arg = pad->input_enabled;
+		if (!pad->input_enabled)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_OUTPUT:
 		arg = pad->out_value;
@@ -384,7 +387,9 @@ static int pmic_mpp_config_get(struct pi
 		arg = pad->amux_input;
 		break;
 	case PMIC_MPP_CONF_PAIRED:
-		arg = pad->paired;
+		if (!pad->paired)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
 		arg = pad->drive_strength;

[PATCH 4.9 049/141] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ]

If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem.  Let's fix it there too.

Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c |   28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -260,22 +260,32 @@ static int pm8xxx_pin_config_get(struct
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		arg = pin->bias == PM8XXX_GPIO_BIAS_NP;
+		if (pin->bias != PM8XXX_GPIO_BIAS_NP)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		arg = pin->bias == PM8XXX_GPIO_BIAS_PD;
+		if (pin->bias != PM8XXX_GPIO_BIAS_PD)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		arg = pin->bias <= PM8XXX_GPIO_BIAS_PU_1P5_30;
+		if (pin->bias > PM8XXX_GPIO_BIAS_PU_1P5_30)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PM8XXX_QCOM_PULL_UP_STRENGTH:
 		arg = pin->pull_up_strength;
 		break;
 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-		arg = pin->disable;
+		if (!pin->disable)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		arg = pin->mode == PM8XXX_GPIO_MODE_INPUT;
+		if (pin->mode != PM8XXX_GPIO_MODE_INPUT)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_OUTPUT:
 		if (pin->mode & PM8XXX_GPIO_MODE_OUTPUT)
@@ -290,10 +300,14 @@ static int pm8xxx_pin_config_get(struct
 		arg = pin->output_strength;
 		break;
 	case PIN_CONFIG_DRIVE_PUSH_PULL:
-		arg = !pin->open_drain;
+		if (pin->open_drain)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-		arg = pin->open_drain;
+		if (!pin->open_drain)
+			return -EINVAL;
+		arg = 1;
 		break;
 	default:
 		return -EINVAL;

[PATCH 4.9 050/141] ixgbevf: VF2VF TCP RSS

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Basierski <sebastianx.basierski@intel.com>

[ Upstream commit 7fb94bd58dd6650a0158e68d414e185077d8b57a ]

While VF2VF with RSS communication, RSS Type were wrongly recognized
and RSS hash was not calculated as it should be. Packets was
distributed on various queues by accident.
This commit fixes that behaviour and causes proper RSS Type recognition.

Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -3419,6 +3419,10 @@ static void ixgbevf_tx_csum(struct ixgbe
 		skb_checksum_help(skb);
 		goto no_csum;
 	}
+
+	if (first->protocol == htons(ETH_P_IP))
+		type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
+
 	/* update TX checksum flag */
 	first->tx_flags |= IXGBE_TX_FLAGS_CSUM;
 	vlan_macip_lens = skb_checksum_start_offset(skb) -

[PATCH 4.9 051/141] ath10k: schedule hardware restart if WMI command times out

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Willi <martin@strongswan.org>

[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ]

When running in AP mode, ath10k sometimes suffers from TX credit
starvation. The issue is hard to reproduce and shows up once in a
few days, but has been repeatedly seen with QCA9882 and a large
range of firmwares, including 10.2.4.70.67.

Once the module is in this state, TX credits are never replenished,
which results in "SWBA overrun" errors, as no beacons can be sent.
Even worse, WMI commands run in a timeout while holding the conf
mutex for three seconds each, making any further operations slow
and the whole system unresponsive.

The firmware/driver never recovers from that state automatically,
and triggering TX flush or warm restarts won't work over WMI. So
issue a hardware restart if a WMI command times out due to missing
TX credits. This implies a connectivity outage of about 1.4s in AP
mode, but brings back the interface and the whole system to a usable
state. WMI command timeouts have not been seen in absent of this
specific issue, so taking such drastic actions seems legitimate.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1822,6 +1822,12 @@ int ath10k_wmi_cmd_send(struct ath10k *a
 	if (ret)
 		dev_kfree_skb_any(skb);
 
+	if (ret == -EAGAIN) {
+		ath10k_warn(ar, "wmi command %d timeout, restarting hardware\n",
+			    cmd_id);
+		queue_work(ar->workqueue, &ar->restart_work);
+	}
+
 	return ret;
 }
 

[PATCH 4.9 052/141] cgroup, netclassid: add a preemption point to write_classid

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.com>

[ Upstream commit a90e90b7d55e789c71d85b946ffb5c1ab2f137ca ]

We have seen a customer complaining about soft lockups on !PREEMPT
kernel config with 4.4 based kernel

[1072141.435366] NMI watchdog: BUG: soft lockup - CPU#21 stuck for 22s! [systemd:1]
[1072141.444090] Modules linked in: mpt3sas raid_class binfmt_misc af_packet 8021q garp mrp stp llc xfs libcrc32c bonding iscsi_ibft iscsi_boot_sysfs msr ext4 crc16 jbd2 mbcache cdc_ether usbnet mii joydev hid_generic usbhid intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif mgag200 i2c_algo_bit ttm ipmi_devintf drbg ixgbe drm_kms_helper vxlan ansi_cprng ip6_udp_tunnel drm aesni_intel udp_tunnel aes_x86_64 iTCO_wdt syscopyarea ptp xhci_pci lrw iTCO_vendor_support pps_core gf128mul ehci_pci glue_helper sysfillrect mdio pcspkr sb_edac ablk_helper cryptd ehci_hcd sysimgblt xhci_hcd fb_sys_fops edac_core mei_me lpc_ich ses usbcore enclosure dca mfd_core ipmi_si mei i2c_i801 scsi_transport_sas usb_common ipmi_msghandler shpchp fjes wmi processor button acpi_pad btrfs xor raid6_pq sd_mod crc32c_intel megaraid_sas sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod md_mod autofs4
[1072141.444146] Supported: Yes
[1072141.444149] CPU: 21 PID: 1 Comm: systemd Not tainted 4.4.121-92.80-default #1
[1072141.444150] Hardware name: LENOVO Lenovo System x3650 M5 -[5462P4U]- -[5462P4U]-/01GR451, BIOS -[TCE136H-2.70]- 06/13/2018
[1072141.444151] task: ffff880191bd0040 ti: ffff880191bd4000 task.ti: ffff880191bd4000
[1072141.444153] RIP: 0010:[<ffffffff815229f9>]  [<ffffffff815229f9>] update_classid_sock+0x29/0x40
[1072141.444157] RSP: 0018:ffff880191bd7d58  EFLAGS: 00000286
[1072141.444158] RAX: ffff883b177cb7c0 RBX: 0000000000000000 RCX: 0000000000000000
[1072141.444159] RDX: 00000000000009c7 RSI: ffff880191bd7d5c RDI: ffff8822e29bb200
[1072141.444160] RBP: ffff883a72230980 R08: 0000000000000101 R09: 0000000000000000
[1072141.444161] R10: 0000000000000008 R11: f000000000000000 R12: ffffffff815229d0
[1072141.444162] R13: 0000000000000000 R14: ffff881fd0a47ac0 R15: ffff880191bd7f28
[1072141.444163] FS:  00007f3e2f1eb8c0(0000) GS:ffff882000340000(0000) knlGS:0000000000000000
[1072141.444164] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1072141.444165] CR2: 00007f3e2f200000 CR3: 0000001ffea4e000 CR4: 00000000001606f0
[1072141.444166] Stack:
[1072141.444166]  ffffffa800000246 00000000000009c7 ffffffff8121d583 ffff8818312a05c0
[1072141.444168]  ffff8818312a1100 ffff880197c3b280 ffff881861422858 ffffffffffffffea
[1072141.444170]  ffffffff81522b1c ffffffff81d0ca20 ffff8817fa17b950 ffff883fdd8121e0
[1072141.444171] Call Trace:
[1072141.444179]  [<ffffffff8121d583>] iterate_fd+0x53/0x80
[1072141.444182]  [<ffffffff81522b1c>] write_classid+0x4c/0x80
[1072141.444187]  [<ffffffff8111328b>] cgroup_file_write+0x9b/0x100
[1072141.444193]  [<ffffffff81278bcb>] kernfs_fop_write+0x11b/0x150
[1072141.444198]  [<ffffffff81201566>] __vfs_write+0x26/0x100
[1072141.444201]  [<ffffffff81201bed>] vfs_write+0x9d/0x190
[1072141.444203]  [<ffffffff812028c2>] SyS_write+0x42/0xa0
[1072141.444207]  [<ffffffff815f58c3>] entry_SYSCALL_64_fastpath+0x1e/0xca
[1072141.445490] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xca

If a cgroup has many tasks with many open file descriptors then we would
end up in a large loop without any rescheduling point throught the
operation. Add cond_resched once per task.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/netclassid_cgroup.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/core/netclassid_cgroup.c
+++ b/net/core/netclassid_cgroup.c
@@ -104,6 +104,7 @@ static int write_classid(struct cgroup_s
 		iterate_fd(p->files, 0, update_classid_sock,
 			   (void *)(unsigned long)cs->classid);
 		task_unlock(p);
+		cond_resched();
 	}
 	css_task_iter_end(&it);
 

[PATCH 4.9 053/141] scsi: esp_scsi: Track residual for PIO transfers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]

If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:

scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]

The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.

The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.

Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/esp_scsi.c |    1 +
 drivers/scsi/esp_scsi.h |    2 ++
 drivers/scsi/mac_esp.c  |    2 ++
 3 files changed, 5 insertions(+)

--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1349,6 +1349,7 @@ static int esp_data_bytes_sent(struct es
 
 	bytes_sent = esp->data_dma_len;
 	bytes_sent -= ecount;
+	bytes_sent -= esp->send_cmd_residual;
 
 	/*
 	 * The am53c974 has a DMA 'pecularity'. The doc states:
--- a/drivers/scsi/esp_scsi.h
+++ b/drivers/scsi/esp_scsi.h
@@ -540,6 +540,8 @@ struct esp {
 
 	void			*dma;
 	int			dmarev;
+
+	u32			send_cmd_residual;
 };
 
 /* A front-end driver for the ESP chip should do the following in
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -426,6 +426,8 @@ static void mac_esp_send_pio_cmd(struct
 			scsi_esp_cmd(esp, ESP_CMD_TI);
 		}
 	}
+
+	esp->send_cmd_residual = esp_count;
 }
 
 static int mac_esp_irq_pending(struct esp *esp)

[PATCH 4.9 054/141] scsi: megaraid_sas: fix a missing-check bug

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wenwen Wang <wang6495@umn.edu>

[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ]

In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.

This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -6901,6 +6901,9 @@ static int megasas_mgmt_compat_ioctl_fw(
 		get_user(user_sense_off, &cioc->sense_off))
 		return -EFAULT;
 
+	if (local_sense_off != user_sense_off)
+		return -EINVAL;
+
 	if (local_sense_len) {
 		void __user **sense_ioc_ptr =
 			(void __user **)((u8 *)((unsigned long)&ioc->frame.raw) + local_sense_off);

[PATCH 4.9 055/141] RDMA/core: Do not expose unsupported counters

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]

If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.

Fixes: 35c4cbb17811 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/sysfs.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -485,7 +485,7 @@ static ssize_t show_pma_counter(struct i
 	ret = get_perf_mad(p->ibdev, p->port_num, tab_attr->attr_id, &data,
 			40 + offset / 8, sizeof(data));
 	if (ret < 0)
-		return sprintf(buf, "N/A (no PMA)\n");
+		return ret;
 
 	switch (width) {
 	case 4:
@@ -1008,10 +1008,12 @@ static int add_port(struct ib_device *de
 		goto err_put;
 	}
 
-	p->pma_table = get_counter_table(device, port_num);
-	ret = sysfs_create_group(&p->kobj, p->pma_table);
-	if (ret)
-		goto err_put_gid_attrs;
+	if (device->process_mad) {
+		p->pma_table = get_counter_table(device, port_num);
+		ret = sysfs_create_group(&p->kobj, p->pma_table);
+		if (ret)
+			goto err_put_gid_attrs;
+	}
 
 	p->gid_group.name  = "gids";
 	p->gid_group.attrs = alloc_group_attrs(show_port_gid, attr.gid_tbl_len);
@@ -1124,7 +1126,8 @@ err_free_gid:
 	p->gid_group.attrs = NULL;
 
 err_remove_pma:
-	sysfs_remove_group(&p->kobj, p->pma_table);
+	if (p->pma_table)
+		sysfs_remove_group(&p->kobj, p->pma_table);
 
 err_put_gid_attrs:
 	kobject_put(&p->gid_attr_group->kobj);
@@ -1236,7 +1239,9 @@ static void free_port_list_attributes(st
 			kfree(port->hw_stats);
 			free_hsag(&port->kobj, port->hw_stats_ag);
 		}
-		sysfs_remove_group(p, port->pma_table);
+
+		if (port->pma_table)
+			sysfs_remove_group(p, port->pma_table);
 		sysfs_remove_group(p, &port->pkey_group);
 		sysfs_remove_group(p, &port->gid_group);
 		sysfs_remove_group(&port->gid_attr_group->kobj,

[PATCH 4.9 056/141] IB/ipoib: Clear IPCB before icmp_send

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denis Drozdov <denisd@mellanox.com>

[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ]

IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:

[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G           O      4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888]  dump_stack+0x9a/0xeb
[ 1083.036031]  print_address_description+0xe3/0x2e0
[ 1083.036213]  kasan_report+0x18a/0x2e0
[ 1083.036356]  ? __ip_options_echo+0xf08/0x1310
[ 1083.036522]  __ip_options_echo+0xf08/0x1310
[ 1083.036688]  icmp_send+0x7b9/0x1cd0
[ 1083.036843]  ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018]  ? netif_schedule_queue+0x5/0x200
[ 1083.037180]  ? debug_show_all_locks+0x310/0x310
[ 1083.037341]  ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519]  ? debug_locks_off+0x11/0x80
[ 1083.037673]  ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841]  ? check_flags.part.27+0x450/0x450
[ 1083.037995]  ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169]  ? debug_locks_off+0x11/0x80
[ 1083.038318]  ? skb_dequeue+0x10e/0x1a0
[ 1083.038476]  ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642]  ? netif_schedule_queue+0xa8/0x200
[ 1083.038820]  ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996]  ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174]  process_one_work+0x912/0x1830
[ 1083.039336]  ? wq_pool_ids_show+0x310/0x310
[ 1083.039491]  ? lock_acquire+0x145/0x3a0
[ 1083.042312]  worker_thread+0x87/0xbb0
[ 1083.045099]  ? process_one_work+0x1830/0x1830
[ 1083.047865]  kthread+0x322/0x3e0
[ 1083.050624]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354]  ret_from_fork+0x3a/0x50

For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB

[  762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[  762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[  762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[  762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[  762.140269] ==================================================================
[  762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[  762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[  762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7

Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_cm.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1422,11 +1422,15 @@ static void ipoib_cm_skb_reap(struct wor
 		spin_unlock_irqrestore(&priv->lock, flags);
 		netif_tx_unlock_bh(dev);
 
-		if (skb->protocol == htons(ETH_P_IP))
+		if (skb->protocol == htons(ETH_P_IP)) {
+			memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
 			icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
+		}
 #if IS_ENABLED(CONFIG_IPV6)
-		else if (skb->protocol == htons(ETH_P_IPV6))
+		else if (skb->protocol == htons(ETH_P_IPV6)) {
+			memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
 			icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+		}
 #endif
 		dev_kfree_skb_any(skb);
 

[PATCH 4.9 057/141] tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Martinez Canillas <javierm@redhat.com>

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]

For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:

  * Active: Security chip is functional
  * Inactive: Security chip is visible, but is not functional
  * Disabled: Security chip is hidden and is not functional

When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.

Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  tpm tpm0: TPM is disabled/deactivated (0x6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  ima: No TPM chip found, activating TPM-bypass! (rc=6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random

Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.

In that case the kernel log is cleaner and less confusing for users, i.e:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: TPM is disabled/deactivated (0x6)
  ima: No TPM chip found, activating TPM-bypass! (rc=6)

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/tpm/tpm-interface.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -420,7 +420,8 @@ ssize_t tpm_transmit_cmd(struct tpm_chip
 	header = cmd;
 
 	err = be32_to_cpu(header->return_code);
-	if (err != 0 && desc)
+	if (err != 0 && err != TPM_ERR_DISABLED && err != TPM_ERR_DEACTIVATED
+	    && desc)
 		dev_err(&chip->dev, "A TPM error (%d) occurred %s\n", err,
 			desc);
 

[PATCH 4.9 058/141] VMCI: Resource wildcard match fixed

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jorgen Hansen <jhansen@vmware.com>

[ Upstream commit 11924ba5e671d6caef1516923e2bd8c72929a3fe ]

When adding a VMCI resource, the check for an existing entry
would ignore that the new entry could be a wildcard. This could
result in multiple resource entries that would match a given
handle. One disastrous outcome of this is that the
refcounting used to ensure that delayed callbacks for VMCI
datagrams have run before the datagram is destroyed can be
wrong, since the refcount could be increased on the duplicate
entry. This in turn leads to a use after free bug. This issue
was discovered by Hangbin Liu using KASAN and syzkaller.

Fixes: bc63dedb7d46 ("VMCI: resource object implementation")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/vmw_vmci/vmci_driver.c   |    2 +-
 drivers/misc/vmw_vmci/vmci_resource.c |    3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/misc/vmw_vmci/vmci_driver.c
+++ b/drivers/misc/vmw_vmci/vmci_driver.c
@@ -113,5 +113,5 @@ module_exit(vmci_drv_exit);
 
 MODULE_AUTHOR("VMware, Inc.");
 MODULE_DESCRIPTION("VMware Virtual Machine Communication Interface.");
-MODULE_VERSION("1.1.5.0-k");
+MODULE_VERSION("1.1.6.0-k");
 MODULE_LICENSE("GPL v2");
--- a/drivers/misc/vmw_vmci/vmci_resource.c
+++ b/drivers/misc/vmw_vmci/vmci_resource.c
@@ -56,7 +56,8 @@ static struct vmci_resource *vmci_resour
 
 		if (r->type == type &&
 		    rid == handle.resource &&
-		    (cid == handle.context || cid == VMCI_INVALID_ID)) {
+		    (cid == handle.context || cid == VMCI_INVALID_ID ||
+		     handle.context == VMCI_INVALID_ID)) {
 			resource = r;
 			break;
 		}

[PATCH 4.9 059/141] usb: gadget: udc: atmel: handle at91sam9rl PMC

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit bb80e4fa57eb75ebd64ae9be4155da6d12c1a997 ]

The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has
its own compatible string. Add support for that.

Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible")
Acked-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1923,6 +1923,8 @@ static struct usba_ep * atmel_udc_of_ini
 	udc->errata = match->data;
 	udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
 	if (IS_ERR(udc->pmc))
+		udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc");
+	if (IS_ERR(udc->pmc))
 		udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc");
 	if (udc->errata && IS_ERR(udc->pmc))
 		return ERR_CAST(udc->pmc);

[PATCH 4.9 060/141] ext4: fix argument checking in EXT4_IOC_MOVE_EXT

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit f18b2b83a727a3db208308057d2c7945f368e625 ]

If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.

Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around.  This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.

Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/move_extent.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -526,9 +526,13 @@ mext_check_arguments(struct inode *orig_
 			orig_inode->i_ino, donor_inode->i_ino);
 		return -EINVAL;
 	}
-	if (orig_eof < orig_start + *len - 1)
+	if (orig_eof <= orig_start)
+		*len = 0;
+	else if (orig_eof < orig_start + *len - 1)
 		*len = orig_eof - orig_start;
-	if (donor_eof < donor_start + *len - 1)
+	if (donor_eof <= donor_start)
+		*len = 0;
+	else if (donor_eof < donor_start + *len - 1)
 		*len = donor_eof - donor_start;
 	if (!*len) {
 		ext4_debug("ext4 move extent: len should not be 0 "

[PATCH 4.9 061/141] MD: fix invalid stored role for a disk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shaohua Li <shli@fb.com>

[ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]

If we change the number of array's device after device is removed from array,
then add the device back to array, we can see that device is added as active
role instead of spare which we expected.

Please see the below link for details:
https://marc.info/?l=linux-raid&m=153736982015076&w=2

This is caused by that we prefer to use device's previous role which is
recorded by saved_raid_disk, but we should respect the new number of
conf->raid_disks since it could be changed after device is removed.

Reported-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Tested-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/md.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1665,6 +1665,10 @@ static int super_1_validate(struct mddev
 			} else
 				set_bit(In_sync, &rdev->flags);
 			rdev->raid_disk = role;
+			if (role >= mddev->raid_disks) {
+				rdev->saved_raid_disk = -1;
+				rdev->raid_disk = -1;
+			}
 			break;
 		}
 		if (sb->devflags & WriteMostly1)

[PATCH 4.9 062/141] PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tonghao Zhang <xiangxia.m.yue@gmail.com>

[ Upstream commit 4c1ef72e9b71a19fb405ebfcd37c0a5e16fa44ca ]

It is a serious driver defect to enable MSI or MSI-X more than once.  Doing
so may panic the kernel as in the stack trace below:

  Call Trace:
    sysfs_add_one+0xa5/0xd0
    create_dir+0x7c/0xe0
    sysfs_create_subdir+0x1c/0x20
    internal_create_group+0x6d/0x290
    sysfs_create_groups+0x4a/0xa0
    populate_msi_sysfs+0x1cd/0x210
    pci_enable_msix+0x31c/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ---[ end trace 11042e2848880209 ]---
    Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa056b4fa

We want to keep the WARN_ON() and stack trace so the driver can be fixed,
but we can avoid the kernel panic by returning an error.  We may still get
warnings like this:

  Call Trace:
    pci_enable_msix+0x3c9/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ------------[ cut here ]------------
    WARNING: at fs/sysfs/dir.c:526 sysfs_add_one+0xa5/0xd0()
    sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:01:00.1/msi_irqs'

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
[bhelgaas: changelog, fix patch whitespace, remove !!]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/msi.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -981,7 +981,6 @@ static int __pci_enable_msix(struct pci_
 			}
 		}
 	}
-	WARN_ON(!!dev->msix_enabled);
 
 	/* Check whether driver already requested for MSI irq */
 	if (dev->msi_enabled) {
@@ -1068,8 +1067,6 @@ static int __pci_enable_msi_range(struct
 	if (!pci_msi_supported(dev, minvec))
 		return -EINVAL;
 
-	WARN_ON(!!dev->msi_enabled);
-
 	/* Check whether driver already requested MSI-X irqs */
 	if (dev->msix_enabled) {
 		dev_info(&dev->dev,
@@ -1080,6 +1077,9 @@ static int __pci_enable_msi_range(struct
 	if (maxvec < minvec)
 		return -ERANGE;
 
+	if (WARN_ON_ONCE(dev->msi_enabled))
+		return -EINVAL;
+
 	nvec = pci_msi_vec_count(dev);
 	if (nvec < 0)
 		return nvec;
@@ -1138,6 +1138,9 @@ static int __pci_enable_msix_range(struc
 	if (maxvec < minvec)
 		return -ERANGE;
 
+	if (WARN_ON_ONCE(dev->msix_enabled))
+		return -EINVAL;
+
 	for (;;) {
 		if (affinity) {
 			nvec = irq_calc_affinity_vectors(dev->irq_affinity,

[PATCH 4.9 063/141] coresight: etb10: Fix handling of perf mode

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit 987d1e8dcd370d96029a3d76a0031b043c4a69ae ]

If the ETB is already enabled in sysfs mode, the ETB reports
success even if a perf mode is requested. Fix this by checking
the requested mode.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwtracing/coresight/coresight-etb10.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -155,6 +155,10 @@ static int etb_enable(struct coresight_d
 	if (val == CS_MODE_PERF)
 		return -EBUSY;
 
+	/* Don't let perf disturb sysFS sessions */
+	if (val == CS_MODE_SYSFS && mode == CS_MODE_PERF)
+		return -EBUSY;
+
 	/* Nothing to do, the tracer is already enabled. */
 	if (val == CS_MODE_SYSFS)
 		goto out;

[PATCH 4.9 064/141] crypto: caam - fix implicit casts in endianness helpers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Horia Geantă" <horia.geanta@nxp.com>

[ Upstream commit aae733a3f46f5ef338fbdde26e14cbb205a23de0 ]

Fix the following sparse endianness warnings:

drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __le32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __le32 [usertype] <noident>
drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __be32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __be32 [usertype] <noident>

drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __le32
drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __be32

Fixes: 261ea058f016 ("crypto: caam - handle core endianness != caam endianness")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/caam/regs.h |   28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@ -68,22 +68,22 @@
 
 extern bool caam_little_end;
 
-#define caam_to_cpu(len)				\
-static inline u##len caam##len ## _to_cpu(u##len val)	\
-{							\
-	if (caam_little_end)				\
-		return le##len ## _to_cpu(val);		\
-	else						\
-		return be##len ## _to_cpu(val);		\
+#define caam_to_cpu(len)						\
+static inline u##len caam##len ## _to_cpu(u##len val)			\
+{									\
+	if (caam_little_end)						\
+		return le##len ## _to_cpu((__force __le##len)val);	\
+	else								\
+		return be##len ## _to_cpu((__force __be##len)val);	\
 }
 
-#define cpu_to_caam(len)				\
-static inline u##len cpu_to_caam##len(u##len val)	\
-{							\
-	if (caam_little_end)				\
-		return cpu_to_le##len(val);		\
-	else						\
-		return cpu_to_be##len(val);		\
+#define cpu_to_caam(len)					\
+static inline u##len cpu_to_caam##len(u##len val)		\
+{								\
+	if (caam_little_end)					\
+		return (__force u##len)cpu_to_le##len(val);	\
+	else							\
+		return (__force u##len)cpu_to_be##len(val);	\
 }
 
 caam_to_cpu(16)

[PATCH 4.9 065/141] usb: chipidea: Prevent unbalanced IRQ disable

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]

The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.

Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/otg.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -20,7 +20,8 @@ void ci_handle_vbus_change(struct ci_hdr
 static inline void ci_otg_queue_work(struct ci_hdrc *ci)
 {
 	disable_irq_nosync(ci->irq);
-	queue_work(ci->wq, &ci->work);
+	if (queue_work(ci->wq, &ci->work) == false)
+		enable_irq(ci->irq);
 }
 
 #endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */

[PATCH 4.9 066/141] driver/dma/ioat: Call del_timer_sync() without holding prep_lock

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Waiman Long <longman@redhat.com>

[ Upstream commit cfb03be6c7e8a1591285849c361d67b09f5149f7 ]

The following lockdep splat was observed:

[ 1222.241750] ======================================================
[ 1222.271301] WARNING: possible circular locking dependency detected
[ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted
[ 1222.326659] ------------------------------------------------------
[ 1222.356565] systemd-shutdow/1 is trying to acquire lock:
[ 1222.382660]  ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0
[ 1222.422928]
[ 1222.422928] but task is already holding lock:
[ 1222.451743]  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
   :
[ 1223.524987] Chain exists of:
[ 1223.524987]   (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock
[ 1223.524987]
[ 1223.594082]  Possible unsafe locking scenario:
[ 1223.594082]
[ 1223.622630]        CPU0                    CPU1
[ 1223.645080]        ----                    ----
[ 1223.667404]   lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.691535]                                lock(&(&ioat_chan->cleanup_lock)->rlock);
[ 1223.728657]                                lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.765122]   lock((&ioat_chan->timer));
[ 1223.784095]
[ 1223.784095]  *** DEADLOCK ***
[ 1223.784095]
[ 1223.813492] 4 locks held by systemd-shutdow/1:
[ 1223.834677]  #0:  (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300
[ 1223.873310]  #1:  (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660
[ 1223.913604]  #2:  (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660
[ 1223.954000]  #3:  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]

In the ioat_shutdown() function:

	spin_lock_bh(&ioat_chan->prep_lock);
	set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
	del_timer_sync(&ioat_chan->timer);
	spin_unlock_bh(&ioat_chan->prep_lock);

According to the synchronization rule for the del_timer_sync() function,
the caller must not hold locks which would prevent completion of the
timer's handler.

The timer structure has its own lock that manages its synchronization.
Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from
trying to use that device anyway, there is probably no need to call
del_timer_sync() while holding the prep_lock. So the del_timer_sync()
call is now moved outside of the prep_lock critical section to prevent
the circular lock dependency.

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/ioat/init.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -1210,8 +1210,15 @@ static void ioat_shutdown(struct pci_dev
 
 		spin_lock_bh(&ioat_chan->prep_lock);
 		set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
-		del_timer_sync(&ioat_chan->timer);
 		spin_unlock_bh(&ioat_chan->prep_lock);
+		/*
+		 * Synchronization rule for del_timer_sync():
+		 *  - The caller must not hold locks which would prevent
+		 *    completion of the timer's handler.
+		 * So prep_lock cannot be held before calling it.
+		 */
+		del_timer_sync(&ioat_chan->timer);
+
 		/* this should quiesce then reset */
 		ioat_reset_hw(ioat_chan);
 	}

[PATCH 4.9 067/141] uio: ensure class is registered before devices

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit ae61cf5b9913027c6953a79ed3894da4f47061bd ]

When both uio and the uio drivers are built in the kernel, it is possible
for a driver to register devices before the uio class is registered.

This may result in a NULL pointer dereference later on in
get_device_parent() when accessing the class glue_dirs spinlock.

The trace looks like that:

Unable to handle kernel NULL pointer dereference at virtual address 00000140
[...]
[<ffff0000089cc234>] _raw_spin_lock+0x14/0x48
[<ffff0000084f56bc>] device_add+0x154/0x6a0
[<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128
[<ffff0000084f5edc>] device_create+0x54/0x60
[<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8
[<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558
[<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8
[<ffff0000083fd81c>] pci_device_probe+0x11c/0x180
[<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8
[<ffff0000084f8a24>] __driver_attach+0xbc/0xc0
[<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98
[<ffff0000084f81b8>] driver_attach+0x20/0x28
[<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228
[<ffff0000084f93c0>] driver_register+0x60/0xf8
[<ffff0000083fb918>] __pci_register_driver+0x40/0x48

Return EPROBE_DEFER in that case so the driver can register the device
later.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/uio/uio.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -249,6 +249,8 @@ static struct class uio_class = {
 	.dev_groups = uio_groups,
 };
 
+bool uio_class_registered;
+
 /*
  * device functions
  */
@@ -780,6 +782,9 @@ static int init_uio_class(void)
 		printk(KERN_ERR "class_register failed for uio\n");
 		goto err_class_register;
 	}
+
+	uio_class_registered = true;
+
 	return 0;
 
 err_class_register:
@@ -790,6 +795,7 @@ exit:
 
 static void release_uio_class(void)
 {
+	uio_class_registered = false;
 	class_unregister(&uio_class);
 	uio_major_cleanup();
 }
@@ -809,6 +815,9 @@ int __uio_register_device(struct module
 	struct uio_device *idev;
 	int ret = 0;
 
+	if (!uio_class_registered)
+		return -EPROBE_DEFER;
+
 	if (!parent || !info || !info->name || !info->version)
 		return -EINVAL;
 

[PATCH 4.9 068/141] scsi: lpfc: Correct soft lockup when running mds diagnostics

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]

When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".

Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_sli.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3512,6 +3512,7 @@ lpfc_sli_handle_slow_ring_event_s4(struc
 	struct hbq_dmabuf *dmabuf;
 	struct lpfc_cq_event *cq_event;
 	unsigned long iflag;
+	int count = 0;
 
 	spin_lock_irqsave(&phba->hbalock, iflag);
 	phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
@@ -3533,16 +3534,22 @@ lpfc_sli_handle_slow_ring_event_s4(struc
 			if (irspiocbq)
 				lpfc_sli_sp_handle_rspiocb(phba, pring,
 							   irspiocbq);
+			count++;
 			break;
 		case CQE_CODE_RECEIVE:
 		case CQE_CODE_RECEIVE_V1:
 			dmabuf = container_of(cq_event, struct hbq_dmabuf,
 					      cq_event);
 			lpfc_sli4_handle_received_buffer(phba, dmabuf);
+			count++;
 			break;
 		default:
 			break;
 		}
+
+		/* Limit the number of events to 64 to avoid soft lockups */
+		if (count == 64)
+			break;
 	}
 }
 

[PATCH 4.9 069/141] signal: Always deliver the kernels SIGKILL and SIGSTOP to a pid namespace init

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ]

Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel.  A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.

Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/signal.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -991,7 +991,7 @@ static int __send_signal(int sig, struct
 
 	result = TRACE_SIGNAL_IGNORED;
 	if (!prepare_signal(sig, t,
-			from_ancestor_ns || (info == SEND_SIG_FORCED)))
+			from_ancestor_ns || (info == SEND_SIG_PRIV) || (info == SEND_SIG_FORCED)))
 		goto ret;
 
 	pending = group ? &t->signal->shared_pending : &t->pending;

[PATCH 4.9 070/141] dmaengine: dma-jz4780: Return error if not probed from DT

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit 54f919a04cf221bc1601d1193682d4379dacacbd ]

The driver calls clk_get() with the clock name set to NULL, which means
that the driver could only work when probed from devicetree. From now
on, we explicitly require the driver to be probed from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/dma-jz4780.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -754,6 +754,11 @@ static int jz4780_dma_probe(struct platf
 	struct resource *res;
 	int i, ret;
 
+	if (!dev->of_node) {
+		dev_err(dev, "This driver must be probed from devicetree\n");
+		return -EINVAL;
+	}
+
 	jzdma = devm_kzalloc(dev, sizeof(*jzdma), GFP_KERNEL);
 	if (!jzdma)
 		return -ENOMEM;

[PATCH 4.9 071/141] ALSA: hda: Check the non-cached stream buffers more explicitly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 78c9be61c3a5cd9e2439fd27a5ffad73a81958c7 ]

Introduce a new flag, uc_buffer, to indicate that the controller
requires the non-cached pages for stream buffers, either as a
chip-specific requirement or specified via snoop=0 option.
This improves the code-readability.

Also, this patch fixes the incorrect behavior for C-Media chip where
the stream buffers were never handled as non-cached due to the check
of driver_type even if you pass snoop=0 option.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_controller.h |    1 +
 sound/pci/hda/hda_intel.c      |   11 ++++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -155,6 +155,7 @@ struct azx {
 	unsigned int msi:1;
 	unsigned int probing:1; /* codec probing phase */
 	unsigned int snoop:1;
+	unsigned int uc_buffer:1; /* non-cached pages for stream buffers */
 	unsigned int align_buffer_size:1;
 	unsigned int region_requested:1;
 	unsigned int disabled:1; /* disabled by vga_switcheroo */
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -410,7 +410,7 @@ static void __mark_pages_wc(struct azx *
 #ifdef CONFIG_SND_DMA_SGBUF
 	if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_SG) {
 		struct snd_sg_buf *sgbuf = dmab->private_data;
-		if (chip->driver_type == AZX_DRIVER_CMEDIA)
+		if (!chip->uc_buffer)
 			return; /* deal with only CORB/RIRB buffers */
 		if (on)
 			set_pages_array_wc(sgbuf->page_table, sgbuf->pages);
@@ -1503,6 +1503,7 @@ static void azx_check_snoop_available(st
 		dev_info(chip->card->dev, "Force to %s mode by module option\n",
 			 snoop ? "snoop" : "non-snoop");
 		chip->snoop = snoop;
+		chip->uc_buffer = !snoop;
 		return;
 	}
 
@@ -1523,8 +1524,12 @@ static void azx_check_snoop_available(st
 		snoop = false;
 
 	chip->snoop = snoop;
-	if (!snoop)
+	if (!snoop) {
 		dev_info(chip->card->dev, "Force to non-snoop mode\n");
+		/* C-Media requires non-cached pages only for CORB/RIRB */
+		if (chip->driver_type != AZX_DRIVER_CMEDIA)
+			chip->uc_buffer = true;
+	}
 }
 
 static void azx_probe_work(struct work_struct *work)
@@ -1947,7 +1952,7 @@ static void pcm_mmap_prepare(struct snd_
 #ifdef CONFIG_X86
 	struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
 	struct azx *chip = apcm->chip;
-	if (!azx_snoop(chip) && chip->driver_type != AZX_DRIVER_CMEDIA)
+	if (chip->uc_buffer)
 		area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
 #endif
 }

[PATCH 4.9 072/141] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit cd6f55457eb449a388e793abd676e3a5b73510bc upstream.

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos4210.dtsi      |    2 --
 arch/arm/boot/dts/exynos4412.dtsi      |    2 --
 arch/arm/boot/dts/exynos5250.dtsi      |    2 --
 arch/arm/boot/dts/exynos5420-cpus.dtsi |   16 ----------------
 arch/arm/boot/dts/exynos5422-cpus.dtsi |   16 ----------------
 5 files changed, 38 deletions(-)

--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -52,8 +52,6 @@
 				400000	975000
 				200000	950000
 			>;
-			cooling-min-level = <4>;
-			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -33,8 +33,6 @@
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
-			cooling-min-level = <13>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -80,8 +80,6 @@
 				 300000  937500
 				 200000  925000
 			>;
-			cooling-min-level = <15>;
-			cooling-max-level = <9>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -33,8 +33,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -45,8 +43,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -57,8 +53,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -69,8 +63,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -82,8 +74,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -94,8 +84,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -106,8 +94,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -118,8 +104,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -32,8 +32,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -44,8 +42,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -56,8 +52,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -68,8 +62,6 @@
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -81,8 +73,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -93,8 +83,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -105,8 +93,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -117,8 +103,6 @@
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};

[PATCH 4.9 073/141] arm: dts: exynos: Add missing cooling device properties for CPUs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 672f33198bee21ee91e6af2cb8f67cfc8bc97ec1 upstream.

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos3250.dtsi |   16 ++++++++++++++++
 arch/arm/boot/dts/exynos4210.dtsi |   13 +++++++++++++
 arch/arm/boot/dts/exynos5250.dtsi |   23 +++++++++++++++++++++++
 3 files changed, 52 insertions(+)

--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -80,6 +80,22 @@
 			compatible = "arm,cortex-a7";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
 		};
 	};
 
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -59,6 +59,19 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x901>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -87,6 +87,29 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1700000000>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <140000>;
+
+			operating-points = <
+				1700000 1300000
+				1600000 1250000
+				1500000 1225000
+				1400000 1200000
+				1300000 1150000
+				1200000 1125000
+				1100000 1100000
+				1000000 1075000
+				 900000 1050000
+				 800000 1025000
+				 700000 1012500
+				 600000 1000000
+				 500000  975000
+				 400000  950000
+				 300000  937500
+				 200000  925000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 

[PATCH 4.9 074/141] ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindings

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit eb9e16d8573e243f8175647f851eb5085dbe97a4 upstream.

Convert Exynos5250 to OPP-v2 bindings. This is a preparation to add proper
support for suspend operation point, which cannot be marked in opp-v1.

Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos5250.dtsi |  130 +++++++++++++++++++++++++-------------
 1 file changed, 88 insertions(+), 42 deletions(-)

--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -57,62 +57,108 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
-			clock-frequency = <1700000000>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			clock-frequency = <1700000000>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1125000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <140000>;
+		};
+	};
+
 	soc: soc {
 		sysram@02020000 {
 			compatible = "mmio-sram";

[PATCH 4.9 075/141] ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit 645b23da6f8b47f295fa87051335d41d139717a5 upstream.

1 GHz CPU OPP is the default boot value for the Exynos5250 SOC, so mark it
as suspend OPP. This fixes suspend/resume on Samsung Exynos5250 Snow
Chomebook, which was broken since switching to generic cpufreq-dt driver
in v4.3.

Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos5250.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -121,6 +121,7 @@
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1075000>;
 			clock-latency-ns = <140000>;
+			opp-suspend;
 		};
 		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;

[PATCH 4.9 076/141] xen-swiotlb: use actually allocated size on check physical continuous

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Jin <joe.jin@oracle.com>

commit 7250f422da0480d8512b756640f131b9b893ccda upstream.

xen_swiotlb_{alloc,free}_coherent() allocate/free memory based on the
order of the pages and not size argument (bytes). This is inconsistent with
range_straddles_page_boundary and memset which use the 'size' value,
which may lead to not exchanging memory with Xen (range_straddles_page_boundary()
returned true). And then the call to xen_swiotlb_free_coherent() would
actually try to exchange the memory with Xen, leading to the kernel
hitting an BUG (as the hypercall returned an error).

This patch fixes it by making the 'size' variable be of the same size
as the amount of memory allocated.

CC: stable@vger.kernel.org
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christoph Helwig <hch@lst.de>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: John Sobecki <john.sobecki@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/swiotlb-xen.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -310,6 +310,9 @@ xen_swiotlb_alloc_coherent(struct device
 	*/
 	flags &= ~(__GFP_DMA | __GFP_HIGHMEM);
 
+	/* Convert the size to actually allocated. */
+	size = 1UL << (order + XEN_PAGE_SHIFT);
+
 	/* On ARM this function returns an ioremap'ped virtual address for
 	 * which virt_to_phys doesn't return the corresponding physical
 	 * address. In fact on ARM virt_to_phys only works for kernel direct
@@ -359,6 +362,9 @@ xen_swiotlb_free_coherent(struct device
 	 * physical address */
 	phys = xen_bus_to_phys(dev_addr);
 
+	/* Convert the size to actually allocated. */
+	size = 1UL << (order + XEN_PAGE_SHIFT);
+
 	if (((dev_addr + size - 1 <= dma_mask)) ||
 	    range_straddles_page_boundary(phys, size))
 		xen_destroy_contiguous_region(phys, order);

[PATCH 4.9 077/141] tpm: Restore functionality to xen vtpm driver.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dr. Greg Wettstein <greg@wind.enjellic.com>

commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream.

Functionality of the xen-tpmfront driver was lost secondary to
the introduction of xenbus multi-page support in commit ccc9d90a9a8b
("xenbus_client: Extend interface to support multi-page ring").

In this commit pointer to location of where the shared page address
is stored was being passed to the xenbus_grant_ring() function rather
then the address of the shared page itself. This resulted in a situation
where the driver would attach to the vtpm-stubdom but any attempt
to send a command to the stub domain would timeout.

A diagnostic finding for this regression is the following error
message being generated when the xen-tpmfront driver probes for a
device:

<3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62

<3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine
the timeouts

This fix is relevant to all kernels from 4.1 forward which is the
release in which multi-page xenbus support was introduced.

Daniel De Graaf formulated the fix by code inspection after the
regression point was located.

Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring")
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[boris: Updated commit message, added Fixes tag]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

---
 drivers/char/tpm/xen-tpmfront.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/tpm/xen-tpmfront.c
+++ b/drivers/char/tpm/xen-tpmfront.c
@@ -203,7 +203,7 @@ static int setup_ring(struct xenbus_devi
 		return -ENOMEM;
 	}
 
-	rv = xenbus_grant_ring(dev, &priv->shr, 1, &gref);
+	rv = xenbus_grant_ring(dev, priv->shr, 1, &gref);
 	if (rv < 0)
 		return rv;
 

[PATCH 4.9 078/141] xen/blkfront: avoid NULL blkfront_info dereference on device removal

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vasilis Liaskovitis <vliaskovitis@suse.com>

commit f92898e7f32e3533bfd95be174044bc349d416ca upstream.

If a block device is hot-added when we are out of grants,
gnttab_grant_foreign_access fails with -ENOSPC (log message "28
granting access to ring page") in this code path:

  talk_to_blkback ->
	setup_blkring ->
		xenbus_grant_ring ->
			gnttab_grant_foreign_access

and the failing path in talk_to_blkback sets the driver_data to NULL:

 destroy_blkring:
        blkif_free(info, 0);

        mutex_lock(&blkfront_mutex);
        free_info(info);
        mutex_unlock(&blkfront_mutex);

        dev_set_drvdata(&dev->dev, NULL);

This results in a NULL pointer BUG when blkfront_remove and blkif_free
try to access the failing device's NULL struct blkfront_info.

Cc: stable@vger.kernel.org # 4.5 and later
Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkfront.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -2524,6 +2524,9 @@ static int blkfront_remove(struct xenbus
 
 	dev_dbg(&xbdev->dev, "%s removed", xbdev->nodename);
 
+	if (!info)
+		return 0;
+
 	blkif_free(info, 0);
 
 	mutex_lock(&info->mutex);

[PATCH 4.9 079/141] xen: fix race in xen_qlock_wait()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Juergen Gross <jgross@suse.com>

commit 2ac2a7d4d9ff4e01e36f9c3d116582f6f655ab47 upstream.

In the following situation a vcpu waiting for a lock might not be
woken up from xen_poll_irq():

CPU 1:                CPU 2:                      CPU 3:
takes a spinlock
                      tries to get lock
                      -> xen_qlock_wait()
frees the lock
-> xen_qlock_kick(cpu2)
                        -> xen_clear_irq_pending()

takes lock again
                                                  tries to get lock
                                                  -> *lock = _Q_SLOW_VAL
                        -> *lock == _Q_SLOW_VAL ?
                        -> xen_poll_irq()
frees the lock
-> xen_qlock_kick(cpu3)

And cpu 2 will sleep forever.

This can be avoided easily by modifying xen_qlock_wait() to call
xen_poll_irq() only if the related irq was not pending and to call
xen_clear_irq_pending() only if it was pending.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/spinlock.c |   15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -45,17 +45,12 @@ static void xen_qlock_wait(u8 *byte, u8
 	if (irq == -1)
 		return;
 
-	/* clear pending */
-	xen_clear_irq_pending(irq);
-	barrier();
+	/* If irq pending already clear it and return. */
+	if (xen_test_irq_pending(irq)) {
+		xen_clear_irq_pending(irq);
+		return;
+	}
 
-	/*
-	 * We check the byte value after clearing pending IRQ to make sure
-	 * that we won't miss a wakeup event because of the clearing.
-	 *
-	 * The sync_clear_bit() call in xen_clear_irq_pending() is atomic.
-	 * So it is effectively a memory barrier for x86.
-	 */
 	if (READ_ONCE(*byte) != val)
 		return;
 

[PATCH 4.9 080/141] xen: make xen_qlock_wait() nestable

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Juergen Gross <jgross@suse.com>

commit a856531951dc8094359dfdac21d59cee5969c18e upstream.

xen_qlock_wait() isn't safe for nested calls due to interrupts. A call
of xen_qlock_kick() might be ignored in case a deeper nesting level
was active right before the call of xen_poll_irq():

CPU 1:                                   CPU 2:
spin_lock(lock1)
                                         spin_lock(lock1)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                            Interrupt happens
spin_unlock(lock1)
-> xen_qlock_kick(CPU 2)
spin_lock_irqsave(lock2)
                                         spin_lock_irqsave(lock2)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                               clears kick for lock1
                                            -> xen_poll_irq()
spin_unlock_irq_restore(lock2)
-> xen_qlock_kick(CPU 2)
                                            wakes up
                                         spin_unlock_irq_restore(lock2)
                                         IRET
                                           resumes in xen_qlock_wait()
                                           -> xen_poll_irq()
                                           never wakes up

The solution is to disable interrupts in xen_qlock_wait() and not to
poll for the irq in case xen_qlock_wait() is called in nmi context.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/spinlock.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -39,29 +39,25 @@ static void xen_qlock_kick(int cpu)
  */
 static void xen_qlock_wait(u8 *byte, u8 val)
 {
+	unsigned long flags;
 	int irq = __this_cpu_read(lock_kicker_irq);
 
 	/* If kicker interrupts not initialized yet, just spin */
-	if (irq == -1)
+	if (irq == -1 || in_nmi())
 		return;
 
-	/* If irq pending already clear it and return. */
+	/* Guard against reentry. */
+	local_irq_save(flags);
+
+	/* If irq pending already clear it. */
 	if (xen_test_irq_pending(irq)) {
 		xen_clear_irq_pending(irq);
-		return;
+	} else if (READ_ONCE(*byte) == val) {
+		/* Block until irq becomes pending (or a spurious wakeup) */
+		xen_poll_irq(irq);
 	}
 
-	if (READ_ONCE(*byte) != val)
-		return;
-
-	/*
-	 * If an interrupt happens here, it will leave the wakeup irq
-	 * pending, which will cause xen_poll_irq() to return
-	 * immediately.
-	 */
-
-	/* Block until irq becomes pending (or perhaps a spurious wakeup) */
-	xen_poll_irq(irq);
+	local_irq_restore(flags);
 }
 
 static irqreturn_t dummy_handler(int irq, void *dev_id)

[PATCH 4.9 081/141] libertas: dont set URB_ZERO_PACKET on IN USB transfer

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lubomir Rintel <lkundrak@v3.sk>

commit 6528d88047801b80d2a5370ad46fb6eff2f509e0 upstream.

The USB core gets rightfully upset:

  usb 1-1: BOGUS urb flags, 240 --> 200
  WARNING: CPU: 0 PID: 60 at drivers/usb/core/urb.c:503 usb_submit_urb+0x2f8/0x3ed
  Modules linked in:
  CPU: 0 PID: 60 Comm: kworker/0:3 Not tainted 4.19.0-rc6-00319-g5206d00a45c7 #39
  Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014
  Workqueue: events request_firmware_work_func
  EIP: usb_submit_urb+0x2f8/0x3ed
  Code: 75 06 8b 8f 80 00 00 00 8d 47 78 89 4d e4 89 55 e8 e8 35 1c f6 ff 8b 55 e8 56 52 8b 4d e4 51 50 68 e3 ce c7 c0 e8 ed 18 c6 ff <0f> 0b 83 c4 14 80 7d ef 01 74 0a 80 7d ef 03 0f 85 b8 00 00 00 8b
  EAX: 00000025 EBX: ce7d4980 ECX: 00000000 EDX: 00000001
  ESI: 00000200 EDI: ce7d8800 EBP: ce7f5ea8 ESP: ce7f5e70
  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 EFLAGS: 00210292
  CR0: 80050033 CR2: 00000000 CR3: 00e80000 CR4: 00000090
  Call Trace:
   ? if_usb_fw_timeo+0x64/0x64
   __if_usb_submit_rx_urb+0x85/0xe6
   ? if_usb_fw_timeo+0x64/0x64
   if_usb_submit_rx_urb_fwload+0xd/0xf
   if_usb_prog_firmware+0xc0/0x3db
   ? _request_firmware+0x54/0x47b
   ? _request_firmware+0x89/0x47b
   ? if_usb_probe+0x412/0x412
   lbs_fw_loaded+0x55/0xa6
   ? debug_smp_processor_id+0x12/0x14
   helper_firmware_cb+0x3c/0x3f
   request_firmware_work_func+0x37/0x6f
   process_one_work+0x164/0x25a
   worker_thread+0x1c4/0x284
   kthread+0xec/0xf1
   ? cancel_delayed_work_sync+0xf/0xf
   ? kthread_create_on_node+0x1a/0x1a
   ret_from_fork+0x2e/0x38
  ---[ end trace 3ef1e3b2dd53852f ]---

Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/marvell/libertas/if_usb.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -468,8 +468,6 @@ static int __if_usb_submit_rx_urb(struct
 			  MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
 			  cardp);
 
-	cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
-
 	lbs_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb);
 	if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) {
 		lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);

[PATCH 4.9 082/141] usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan (Samsung OSG) <shuah@kernel.org>

commit e28fd56ad5273be67d0fae5bedc7e1680e729952 upstream.

In rmmod path, usbip_vudc does platform_device_put() twice once from
platform_device_unregister() and then from put_vudc_device().

The second put results in:

BUG kmalloc-2048 (Not tainted): Poison overwritten error or
BUG: KASAN: use-after-free in kobject_put+0x1e/0x230 if KASAN is
enabled.

[  169.042156] calling  init+0x0/0x1000 [usbip_vudc] @ 1697
[  169.042396] =============================================================================
[  169.043678] probe of usbip-vudc.0 returned 1 after 350 usecs
[  169.044508] BUG kmalloc-2048 (Not tainted): Poison overwritten
[  169.044509] -----------------------------------------------------------------------------
...
[  169.057849] INFO: Freed in device_release+0x2b/0x80 age=4223 cpu=3 pid=1693
[  169.057852] 	kobject_put+0x86/0x1b0
[  169.057853] 	0xffffffffc0c30a96
[  169.057855] 	__x64_sys_delete_module+0x157/0x240

Fix it to call platform_device_del() instead and let put_vudc_device() do
the platform_device_put().

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/vudc_main.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/usb/usbip/vudc_main.c
+++ b/drivers/usb/usbip/vudc_main.c
@@ -85,6 +85,10 @@ static int __init init(void)
 cleanup:
 	list_for_each_entry_safe(udc_dev, udc_dev2, &vudc_devices, dev_entry) {
 		list_del(&udc_dev->dev_entry);
+		/*
+		 * Just do platform_device_del() here, put_vudc_device()
+		 * calls the platform_device_put()
+		 */
 		platform_device_del(udc_dev->pdev);
 		put_vudc_device(udc_dev);
 	}
@@ -101,7 +105,11 @@ static void __exit cleanup(void)
 
 	list_for_each_entry_safe(udc_dev, udc_dev2, &vudc_devices, dev_entry) {
 		list_del(&udc_dev->dev_entry);
-		platform_device_unregister(udc_dev->pdev);
+		/*
+		 * Just do platform_device_del() here, put_vudc_device()
+		 * calls the platform_device_put()
+		 */
+		platform_device_del(udc_dev->pdev);
 		put_vudc_device(udc_dev);
 	}
 	platform_driver_unregister(&vudc_driver);

[PATCH 4.9 083/141] iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luca Coelho <luciano.coelho@intel.com>

commit 3d71c3f1f50cf309bd20659422af549bc784bfff upstream.

The rs_rate_from_ucode_rate() function may return -EINVAL if the rate
is invalid, but none of the callsites check for the error, potentially
making us access arrays with index IWL_RATE_INVALID, which is larger
than the arrays, causing an out-of-bounds access.  This will trigger
KASAN warnings, such as the one reported in the bugzilla issue
mentioned below.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c |   24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
@@ -1207,7 +1207,11 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm
 	    !(info->flags & IEEE80211_TX_STAT_AMPDU))
 		return;
 
-	rs_rate_from_ucode_rate(tx_resp_hwrate, info->band, &tx_resp_rate);
+	if (rs_rate_from_ucode_rate(tx_resp_hwrate, info->band,
+				    &tx_resp_rate)) {
+		WARN_ON_ONCE(1);
+		return;
+	}
 
 #ifdef CONFIG_MAC80211_DEBUGFS
 	/* Disable last tx check if we are debugging with fixed rate but
@@ -1263,7 +1267,10 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm
 	 */
 	table = &lq_sta->lq;
 	lq_hwrate = le32_to_cpu(table->rs_table[0]);
-	rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate);
+	if (rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate)) {
+		WARN_ON_ONCE(1);
+		return;
+	}
 
 	/* Here we actually compare this rate to the latest LQ command */
 	if (!rs_rate_equal(&tx_resp_rate, &lq_rate, allow_ant_mismatch)) {
@@ -1365,8 +1372,12 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm
 		/* Collect data for each rate used during failed TX attempts */
 		for (i = 0; i <= retries; ++i) {
 			lq_hwrate = le32_to_cpu(table->rs_table[i]);
-			rs_rate_from_ucode_rate(lq_hwrate, info->band,
-						&lq_rate);
+			if (rs_rate_from_ucode_rate(lq_hwrate, info->band,
+						    &lq_rate)) {
+				WARN_ON_ONCE(1);
+				return;
+			}
+
 			/*
 			 * Only collect stats if retried rate is in the same RS
 			 * table as active/search.
@@ -3261,7 +3272,10 @@ static void rs_build_rates_table_from_fi
 	for (i = 0; i < num_rates; i++)
 		lq_cmd->rs_table[i] = ucode_rate_le32;
 
-	rs_rate_from_ucode_rate(ucode_rate, band, &rate);
+	if (rs_rate_from_ucode_rate(ucode_rate, band, &rate)) {
+		WARN_ON_ONCE(1);
+		return;
+	}
 
 	if (is_mimo(&rate))
 		lq_cmd->mimo_delim = num_rates - 1;

[PATCH 4.9 084/141] net/ipv4: defensive cipso option parsing

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Nuernberger <snu@amazon.com>

commit 076ed3da0c9b2f88d9157dbe7044a45641ae369e upstream.

commit 40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed
a possible infinite loop in the IP option parsing of CIPSO. The fix
assumes that ip_options_compile filtered out all zero length options and
that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist.
While this assumption currently holds true, add explicit checks for zero
length and invalid length options to be safe for the future. Even though
ip_options_compile should have validated the options, the introduction of
new one-byte options can still confuse this code without the additional
checks.

Signed-off-by: Stefan Nuernberger <snu@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Simon Veith <sveith@amazon.de>
Cc: stable@vger.kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/cipso_ipv4.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1512,7 +1512,7 @@ static int cipso_v4_parsetag_loc(const s
  *
  * Description:
  * Parse the packet's IP header looking for a CIPSO option.  Returns a pointer
- * to the start of the CIPSO option on success, NULL if one if not found.
+ * to the start of the CIPSO option on success, NULL if one is not found.
  *
  */
 unsigned char *cipso_v4_optptr(const struct sk_buff *skb)
@@ -1522,10 +1522,8 @@ unsigned char *cipso_v4_optptr(const str
 	int optlen;
 	int taglen;
 
-	for (optlen = iph->ihl*4 - sizeof(struct iphdr); optlen > 0; ) {
+	for (optlen = iph->ihl*4 - sizeof(struct iphdr); optlen > 1; ) {
 		switch (optptr[0]) {
-		case IPOPT_CIPSO:
-			return optptr;
 		case IPOPT_END:
 			return NULL;
 		case IPOPT_NOOP:
@@ -1534,6 +1532,11 @@ unsigned char *cipso_v4_optptr(const str
 		default:
 			taglen = optptr[1];
 		}
+		if (!taglen || taglen > optlen)
+			return NULL;
+		if (optptr[0] == IPOPT_CIPSO)
+			return optptr;
+
 		optlen -= taglen;
 		optptr += taglen;
 	}

[PATCH 4.9 085/141] libnvdimm: Hold reference on parent while scheduling async init

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Duyck <alexander.h.duyck@linux.intel.com>

commit b6eae0f61db27748606cc00dafcfd1e2c032f0a5 upstream.

Unlike asynchronous initialization in the core we have not yet associated
the device with the parent, and as such the device doesn't hold a reference
to the parent.

In order to resolve that we should be holding a reference on the parent
until the asynchronous initialization has completed.

Cc: <stable@vger.kernel.org>
Fixes: 4d88a97aa9e8 ("libnvdimm: ...base ... infrastructure")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvdimm/bus.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -424,6 +424,8 @@ static void nd_async_device_register(voi
 		put_device(dev);
 	}
 	put_device(dev);
+	if (dev->parent)
+		put_device(dev->parent);
 }
 
 static void nd_async_device_unregister(void *d, async_cookie_t cookie)
@@ -443,6 +445,8 @@ void __nd_device_register(struct device
 	if (!dev)
 		return;
 	dev->bus = &nvdimm_bus_type;
+	if (dev->parent)
+		get_device(dev->parent);
 	get_device(dev);
 	async_schedule_domain(nd_async_device_register, dev,
 			&nd_async_domain);

[PATCH 4.9 086/141] ASoC: intel: skylake: Add missing break in skl_tplg_get_token()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 9c80c5a8831471e0a3e139aad1b0d4c0fdc50b2f upstream.

skl_tplg_get_token() misses a break in the big switch() block for
SKL_TKN_U8_CORE_ID entry.
Spotted nicely by -Wimplicit-fallthrough compiler option.

Fixes: 6277e83292a2 ("ASoC: Intel: Skylake: Parse vendor tokens to build module data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/intel/skylake/skl-topology.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -1780,6 +1780,7 @@ static int skl_tplg_get_token(struct dev
 
 	case SKL_TKN_U8_CORE_ID:
 		mconfig->core_id = tkn_elem->value;
+		break;
 
 	case SKL_TKN_U8_MOD_TYPE:
 		mconfig->m_type = tkn_elem->value;

[PATCH 4.9 087/141] jbd2: fix use after free in jbd2_log_do_checkpoint()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit ccd3c4373eacb044eb3832966299d13d2631f66f upstream.

The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:

CPU0					CPU1
jbd2_log_do_checkpoint()
					jbd2_journal_try_to_free_buffers()
					  __journal_try_to_free_buffer(bh)
  ...
  while (transaction->t_checkpoint_io_list)
  ...
    if (buffer_locked(bh)) {

<-- IO completes now, buffer gets unlocked -->

      spin_unlock(&journal->j_list_lock);
					    spin_lock(&journal->j_list_lock);
					    __jbd2_journal_remove_checkpoint(jh);
					    spin_unlock(&journal->j_list_lock);
					  try_to_free_buffers(page);
      get_bh(bh) <-- accesses freed bh

Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.

Fixes: dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes: be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jbd2/checkpoint.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -254,8 +254,8 @@ restart:
 		bh = jh2bh(jh);
 
 		if (buffer_locked(bh)) {
-			spin_unlock(&journal->j_list_lock);
 			get_bh(bh);
+			spin_unlock(&journal->j_list_lock);
 			wait_on_buffer(bh);
 			/* the journal_head may have gone by now */
 			BUFFER_TRACE(bh, "brelse");
@@ -336,8 +336,8 @@ restart2:
 		jh = transaction->t_checkpoint_io_list;
 		bh = jh2bh(jh);
 		if (buffer_locked(bh)) {
-			spin_unlock(&journal->j_list_lock);
 			get_bh(bh);
+			spin_unlock(&journal->j_list_lock);
 			wait_on_buffer(bh);
 			/* the journal_head may have gone by now */
 			BUFFER_TRACE(bh, "brelse");

[PATCH 4.9 088/141] gfs2_meta: ->mount() can get NULL dev_name

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 3df629d873f8683af6f0d34dfc743f637966d483 upstream.

get in sync with mount_bdev() handling of the same

Reported-by: syzbot+c54f8e94e6bba03b04e9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/gfs2/ops_fstype.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1355,6 +1355,9 @@ static struct dentry *gfs2_mount_meta(st
 	struct path path;
 	int error;
 
+	if (!dev_name || !*dev_name)
+		return ERR_PTR(-EINVAL);
+
 	error = kern_path(dev_name, LOOKUP_FOLLOW, &path);
 	if (error) {
 		pr_warn("path_lookup on %s returned error %d\n",

[PATCH 4.9 089/141] ext4: initialize retries variable in ext4_da_write_inline_data_begin()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukas Czerner <lczerner@redhat.com>

commit 625ef8a3acd111d5f496d190baf99d1a815bd03e upstream.

Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: bc0ca9df3b2a ("ext4: retry allocation when inline->extent conversion failed")
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inline.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -860,7 +860,7 @@ int ext4_da_write_inline_data_begin(stru
 	handle_t *handle;
 	struct page *page;
 	struct ext4_iloc iloc;
-	int retries;
+	int retries = 0;
 
 	ret = ext4_get_inode_loc(inode, &iloc);
 	if (ret)

[PATCH 4.9 090/141] ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTR

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Shilong <wshilong@ddn.com>

commit 182a79e0c17147d2c2d3990a9a7b6b58a1561c7a upstream.

We return most failure of dquota_initialize() except
inode evict, this could make a bit sense, for example
we allow file removal even quota files are broken?

But it dosen't make sense to allow setting project
if quota files etc are broken.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ioctl.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -345,7 +345,9 @@ static int ext4_ioctl_setproject(struct
 	}
 	brelse(iloc.bh);
 
-	dquot_initialize(inode);
+	err = dquot_initialize(inode);
+	if (err)
+		return err;
 
 	handle = ext4_journal_start(inode, EXT4_HT_QUOTA,
 		EXT4_QUOTA_INIT_BLOCKS(sb) +

[PATCH 4.9 091/141] HID: hiddev: fix potential Spectre v1

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Breno Leitao <leitao@debian.org>

commit f11274396a538b31bc010f782e05c2ce3f804c13 upstream.

uref->usage_index can be indirectly controlled by userspace, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This field is used as an array index by the hiddev_ioctl_usage() function,
when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or
HIDIOCSUSAGES.

For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to
field->maxusage and then used as an index to dereference field->usage
array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where
uref->usage_index is checked against an array maximum value and then it is
used as an index in an array.

This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the
traditional Spectre V1 first load:

	copy_from_user(uref, user_arg, sizeof(*uref))
	if (uref->usage_index >= field->maxusage)
		goto inval;
	i = field->usage[uref->usage_index].collection_index;
	return i;

This patch fixes this by sanitizing field uref->usage_index before using it
to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in
HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load.

Cc: <stable@vger.kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
v2: Contemplate cmd == HIDIOC{G,S}USAGES case
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/usbhid/hiddev.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -521,14 +521,24 @@ static noinline int hiddev_ioctl_usage(s
 			if (cmd == HIDIOCGCOLLECTIONINDEX) {
 				if (uref->usage_index >= field->maxusage)
 					goto inval;
+				uref->usage_index =
+					array_index_nospec(uref->usage_index,
+							   field->maxusage);
 			} else if (uref->usage_index >= field->report_count)
 				goto inval;
 		}
 
-		if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) &&
-		    (uref_multi->num_values > HID_MAX_MULTI_USAGES ||
-		     uref->usage_index + uref_multi->num_values > field->report_count))
-			goto inval;
+		if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
+			if (uref_multi->num_values > HID_MAX_MULTI_USAGES ||
+			    uref->usage_index + uref_multi->num_values >
+			    field->report_count)
+				goto inval;
+
+			uref->usage_index =
+				array_index_nospec(uref->usage_index,
+						   field->report_count -
+						   uref_multi->num_values);
+		}
 
 		switch (cmd) {
 		case HIDIOCGUSAGE:

[PATCH 4.9 092/141] EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Luck <tony.luck@intel.com>

commit 432de7fd7630c84ad24f1c2acd1e3bb4ce3741ca upstream.

The count of errors is picked up from bits 52:38 of the machine check
bank status register. But this is the count of *corrected* errors. If an
uncorrected error is being logged, the h/w sets this field to 0. Which
means that when edac_mc_handle_error() is called, the EDAC core will
carefully add zero to the appropriate uncorrected error counts.

Signed-off-by: Tony Luck <tony.luck@intel.com>
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180928213934.19890-1-tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/i7core_edac.c |    1 +
 drivers/edac/sb_edac.c     |    1 +
 drivers/edac/skx_edac.c    |    1 +
 3 files changed, 3 insertions(+)

--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1711,6 +1711,7 @@ static void i7core_mce_output_error(stru
 	u32 errnum = find_first_bit(&error, 32);
 
 	if (uncorrected_error) {
+		core_err_cnt = 1;
 		if (ripv)
 			tp_event = HW_EVENT_ERR_FATAL;
 		else
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -2934,6 +2934,7 @@ static void sbridge_mce_output_error(str
 		recoverable = GET_BITFIELD(m->status, 56, 56);
 
 	if (uncorrected_error) {
+		core_err_cnt = 1;
 		if (ripv) {
 			type = "FATAL";
 			tp_event = HW_EVENT_ERR_FATAL;
--- a/drivers/edac/skx_edac.c
+++ b/drivers/edac/skx_edac.c
@@ -897,6 +897,7 @@ static void skx_mce_output_error(struct
 	recoverable = GET_BITFIELD(m->status, 56, 56);
 
 	if (uncorrected_error) {
+		core_err_cnt = 1;
 		if (ripv) {
 			type = "FATAL";
 			tp_event = HW_EVENT_ERR_FATAL;

[PATCH 4.9 093/141] EDAC, skx_edac: Fix logical channel intermediate decoding

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

commit 8f18973877204dc8ca4ce1004a5d28683b9a7086 upstream.

The code "lchan = (lchan << 1) | ~lchan" for logical channel
intermediate decoding is wrong. The wrong intermediate decoding
result is {0xffffffff, 0xfffffffe}.

Fix it by replacing '~' with '!'. The correct intermediate
decoding result is {0x1, 0x2}.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: Aristeu Rozanski <aris@redhat.com>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20181009172025.18594-1-tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/skx_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/skx_edac.c
+++ b/drivers/edac/skx_edac.c
@@ -606,7 +606,7 @@ sad_found:
 			break;
 		case 2:
 			lchan = (addr >> shift) % 2;
-			lchan = (lchan << 1) | ~lchan;
+			lchan = (lchan << 1) | !lchan;
 			break;
 		case 3:
 			lchan = ((addr >> shift) % 2) << 1;

[PATCH 4.9 094/141] PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bin Meng <bmeng.cn@gmail.com>

commit d0c9606b31a21028fb5b753c8ad79626292accfd upstream.

Add Device IDs to the Intel GPU "spurious interrupt" quirk table.

For these devices, unplugging the VGA cable and plugging it in again causes
spurious interrupts from the IGD.  Linux eventually disables the interrupt,
but of course that disables any other devices sharing the interrupt.

The theory is that this is a VGA BIOS defect: it should have disabled the
IGD interrupt but failed to do so.

See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") and 7c82126a94e6 ("PCI: Add new ID for Intel GPU
"spurious interrupt" quirk") for some history.

[bhelgaas: See link below for discussion about how to fix this more
generically instead of adding device IDs for every new Intel GPU.  I hope
this is the last patch to add device IDs.]

Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3124,7 +3124,11 @@ static void disable_igfx_irq(struct pci_
 
 	pci_iounmap(dev, regs);
 }
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0042, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0046, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x004a, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0106, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
 

[PATCH 4.9 095/141] signal/GenWQE: Fix sending of SIGKILL

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit 0ab93e9c99f8208c0a1a7b7170c827936268c996 upstream.

The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another.  It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates.   Neither of which are
guaranteed to be true.

Therefore replace caching the task_struct of the opener with
pid of the openers thread group id.  All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.

Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.

The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV.  The exact same processess
will be killed just with less work, and less confusion.  The work done
by force_sig is really only needed for handling syncrhonous
exceptions.

It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.

Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Haverkamp <haver@linux.vnet.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com>
Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/genwqe/card_base.h |    2 +-
 drivers/misc/genwqe/card_dev.c  |    9 +++++----
 2 files changed, 6 insertions(+), 5 deletions(-)

--- a/drivers/misc/genwqe/card_base.h
+++ b/drivers/misc/genwqe/card_base.h
@@ -404,7 +404,7 @@ struct genwqe_file {
 	struct file *filp;
 
 	struct fasync_struct *async_queue;
-	struct task_struct *owner;
+	struct pid *opener;
 	struct list_head list;		/* entry in list of open files */
 
 	spinlock_t map_lock;		/* lock for dma_mappings */
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -52,7 +52,7 @@ static void genwqe_add_file(struct genwq
 {
 	unsigned long flags;
 
-	cfile->owner = current;
+	cfile->opener = get_pid(task_tgid(current));
 	spin_lock_irqsave(&cd->file_lock, flags);
 	list_add(&cfile->list, &cd->file_list);
 	spin_unlock_irqrestore(&cd->file_lock, flags);
@@ -65,6 +65,7 @@ static int genwqe_del_file(struct genwqe
 	spin_lock_irqsave(&cd->file_lock, flags);
 	list_del(&cfile->list);
 	spin_unlock_irqrestore(&cd->file_lock, flags);
+	put_pid(cfile->opener);
 
 	return 0;
 }
@@ -275,7 +276,7 @@ static int genwqe_kill_fasync(struct gen
 	return files;
 }
 
-static int genwqe_force_sig(struct genwqe_dev *cd, int sig)
+static int genwqe_terminate(struct genwqe_dev *cd)
 {
 	unsigned int files = 0;
 	unsigned long flags;
@@ -283,7 +284,7 @@ static int genwqe_force_sig(struct genwq
 
 	spin_lock_irqsave(&cd->file_lock, flags);
 	list_for_each_entry(cfile, &cd->file_list, list) {
-		force_sig(sig, cfile->owner);
+		kill_pid(cfile->opener, SIGKILL, 1);
 		files++;
 	}
 	spin_unlock_irqrestore(&cd->file_lock, flags);
@@ -1356,7 +1357,7 @@ static int genwqe_inform_and_stop_proces
 		dev_warn(&pci_dev->dev,
 			 "[%s] send SIGKILL and wait ...\n", __func__);
 
-		rc = genwqe_force_sig(cd, SIGKILL); /* force terminate */
+		rc = genwqe_terminate(cd);
 		if (rc) {
 			/* Give kill_timout more seconds to end processes */
 			for (i = 0; (i < genwqe_kill_timeout) &&

[PATCH 4.9 096/141] crypto: lrw - Fix out-of bounds access on counter overflow

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ondrej Mosnacek <omosnace@redhat.com>

commit fbe1a850b3b1522e9fc22319ccbbcd2ab05328d2 upstream.

When the LRW block counter overflows, the current implementation returns
128 as the index to the precomputed multiplication table, which has 128
entries. This patch fixes it to return the correct value (127).

Fixes: 64470f1b8510 ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode")
Cc: <stable@vger.kernel.org> # 2.6.20+
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/lrw.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -132,7 +132,12 @@ static inline int get_index128(be128 *bl
 		return x + ffz(val);
 	}
 
-	return x;
+	/*
+	 * If we get here, then x == 128 and we are incrementing the counter
+	 * from all ones to all zeros. This means we must return index 127, i.e.
+	 * the one corresponding to key2*{ 1,...,1 }.
+	 */
+	return 127;
 }
 
 static int crypt(struct blkcipher_desc *d,

[PATCH 4.9 097/141] crypto: tcrypt - fix ghash-generic speed test

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Horia Geantă <horia.geanta@nxp.com>

commit 331351f89c36bf7d03561a28b6f64fa10a9f6f3a upstream.

ghash is a keyed hash algorithm, thus setkey needs to be called.
Otherwise the following error occurs:
$ modprobe tcrypt mode=318 sec=1
testing speed of async ghash-generic (ghash-generic)
tcrypt: test  0 (   16 byte blocks,   16 bytes per update,   1 updates):
tcrypt: hashing failed ret=-126

Cc: <stable@vger.kernel.org> # 4.6+
Fixes: 0660511c0bee ("crypto: tcrypt - Use ahash")
Tested-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/tcrypt.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -729,6 +729,9 @@ static void test_ahash_speed_common(cons
 			break;
 		}
 
+		if (speed[i].klen)
+			crypto_ahash_setkey(tfm, tvmem[0], speed[i].klen);
+
 		pr_info("test%3u "
 			"(%5u byte blocks,%5u bytes per update,%4u updates): ",
 			i, speed[i].blen, speed[i].plen, speed[i].blen / speed[i].plen);

[PATCH 4.9 098/141] ima: fix showing large violations or runtime_measurements_count

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 1e4c8dafbb6bf72fb5eca035b861e39c5896c2b7 upstream.

The 12 character temporary buffer is not necessarily long enough to hold
a 'long' value.  Increase it.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_fs.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -29,14 +29,14 @@
 static DEFINE_MUTEX(ima_write_mutex);
 
 static int valid_policy = 1;
-#define TMPBUFLEN 12
+
 static ssize_t ima_show_htable_value(char __user *buf, size_t count,
 				     loff_t *ppos, atomic_long_t *val)
 {
-	char tmpbuf[TMPBUFLEN];
+	char tmpbuf[32];	/* greater than largest 'long' string value */
 	ssize_t len;
 
-	len = scnprintf(tmpbuf, TMPBUFLEN, "%li\n", atomic_long_read(val));
+	len = scnprintf(tmpbuf, sizeof(tmpbuf), "%li\n", atomic_long_read(val));
 	return simple_read_from_buffer(buf, count, ppos, tmpbuf, len);
 }
 

[PATCH 4.9 099/141] hugetlbfs: dirty pages as they are added to pagecache

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Kravetz <mike.kravetz@oracle.com>

commit 22146c3ce98962436e401f7b7016a6f664c9ffb5 upstream.

Some test systems were experiencing negative huge page reserve counts and
incorrect file block counts.  This was traced to /proc/sys/vm/drop_caches
removing clean pages from hugetlbfs file pagecaches.  When non-hugetlbfs
explicit code removes the pages, the appropriate accounting is not
performed.

This can be recreated as follows:
 fallocate -l 2M /dev/hugepages/foo
 echo 1 > /proc/sys/vm/drop_caches
 fallocate -l 2M /dev/hugepages/foo
 grep -i huge /proc/meminfo
   AnonHugePages:         0 kB
   ShmemHugePages:        0 kB
   HugePages_Total:    2048
   HugePages_Free:     2047
   HugePages_Rsvd:    18446744073709551615
   HugePages_Surp:        0
   Hugepagesize:       2048 kB
   Hugetlb:         4194304 kB
 ls -lsh /dev/hugepages/foo
   4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo

To address this issue, dirty pages as they are added to pagecache.  This
can easily be reproduced with fallocate as shown above.  Read faulted
pages will eventually end up being marked dirty.  But there is a window
where they are clean and could be impacted by code such as drop_caches.
So, just dirty them all as they are added to the pagecache.

Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com
Fixes: 6bda666a03f0 ("hugepages: fold find_or_alloc_pages into huge_no_page()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mihcla Hocko <mhocko@suse.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/hugetlb.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3645,6 +3645,12 @@ int huge_add_to_page_cache(struct page *
 		return err;
 	ClearPagePrivate(page);
 
+	/*
+	 * set page dirty so that it will not be removed from cache/file
+	 * by non-hugetlbfs specific code paths.
+	 */
+	set_page_dirty(page);
+
 	spin_lock(&inode->i_lock);
 	inode->i_blocks += blocks_per_huge_page(h);
 	spin_unlock(&inode->i_lock);

[PATCH 4.9 100/141] kbuild: fix kernel/bounds.c W=1 warning

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 6a32c2469c3fbfee8f25bcd20af647326650a6cf upstream.

Building any configuration with 'make W=1' produces a warning:

kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes]

When also passing -Werror, this prevents us from building any other files.
Nobody ever calls the function, but we can't make it 'static' either
since we want the compiler output.

Calling it 'main' instead however avoids the warning, because gcc
does not insist on having a declaration for main.

Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bounds.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/kernel/bounds.c
+++ b/kernel/bounds.c
@@ -12,7 +12,7 @@
 #include <linux/log2.h>
 #include <linux/spinlock_types.h>
 
-void foo(void)
+int main(void)
 {
 	/* The enum constants to put into include/generated/bounds.h */
 	DEFINE(NR_PAGEFLAGS, __NR_PAGEFLAGS);
@@ -22,4 +22,6 @@ void foo(void)
 #endif
 	DEFINE(SPINLOCK_SIZE, sizeof(spinlock_t));
 	/* End of constants */
+
+	return 0;
 }

[PATCH 4.9 101/141] iio: ad5064: Fix regulator handling

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

commit 8911a43bc198877fad9f4b0246a866b26bb547ab upstream.

The correct way to handle errors returned by regualtor_get() and friends is
to propagate the error since that means that an regulator was specified,
but something went wrong when requesting it.

For handling optional regulators, e.g. when the device has an internal
vref, regulator_get_optional() should be used to avoid getting the dummy
regulator that the regulator core otherwise provides.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/dac/ad5064.c |   53 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 38 insertions(+), 15 deletions(-)

--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -760,6 +760,40 @@ static int ad5064_set_config(struct ad50
 	return ad5064_write(st, cmd, 0, val, 0);
 }
 
+static int ad5064_request_vref(struct ad5064_state *st, struct device *dev)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ad5064_num_vref(st); ++i)
+		st->vref_reg[i].supply = ad5064_vref_name(st, i);
+
+	if (!st->chip_info->internal_vref)
+		return devm_regulator_bulk_get(dev, ad5064_num_vref(st),
+					       st->vref_reg);
+
+	/*
+	 * This assumes that when the regulator has an internal VREF
+	 * there is only one external VREF connection, which is
+	 * currently the case for all supported devices.
+	 */
+	st->vref_reg[0].consumer = devm_regulator_get_optional(dev, "vref");
+	if (!IS_ERR(st->vref_reg[0].consumer))
+		return 0;
+
+	ret = PTR_ERR(st->vref_reg[0].consumer);
+	if (ret != -ENODEV)
+		return ret;
+
+	/* If no external regulator was supplied use the internal VREF */
+	st->use_internal_vref = true;
+	ret = ad5064_set_config(st, AD5064_CONFIG_INT_VREF_ENABLE);
+	if (ret)
+		dev_err(dev, "Failed to enable internal vref: %d\n", ret);
+
+	return ret;
+}
+
 static int ad5064_probe(struct device *dev, enum ad5064_type type,
 			const char *name, ad5064_write_func write)
 {
@@ -780,22 +814,11 @@ static int ad5064_probe(struct device *d
 	st->dev = dev;
 	st->write = write;
 
-	for (i = 0; i < ad5064_num_vref(st); ++i)
-		st->vref_reg[i].supply = ad5064_vref_name(st, i);
+	ret = ad5064_request_vref(st, dev);
+	if (ret)
+		return ret;
 
-	ret = devm_regulator_bulk_get(dev, ad5064_num_vref(st),
-		st->vref_reg);
-	if (ret) {
-		if (!st->chip_info->internal_vref)
-			return ret;
-		st->use_internal_vref = true;
-		ret = ad5064_set_config(st, AD5064_CONFIG_INT_VREF_ENABLE);
-		if (ret) {
-			dev_err(dev, "Failed to enable internal vref: %d\n",
-				ret);
-			return ret;
-		}
-	} else {
+	if (!st->use_internal_vref) {
 		ret = regulator_bulk_enable(ad5064_num_vref(st), st->vref_reg);
 		if (ret)
 			return ret;

[PATCH 4.9 102/141] iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

commit d3fa21c73c391975488818b085b894c2980ea052 upstream.

Leaving for_each_child_of_node loop we should release child device node,
if it is not stored for future use.

Found by Linux Driver Verification project (linuxtesting.org).

JC: I'm not sending this as a quick fix as it's been wrong for years,
but good to pick up for stable after the merge window.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 6df2e98c3ea56 ("iio: adc: Add imx25-gcq ADC driver")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/fsl-imx25-gcq.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -209,12 +209,14 @@ static int mx25_gcq_setup_cfgs(struct pl
 		ret = of_property_read_u32(child, "reg", &reg);
 		if (ret) {
 			dev_err(dev, "Failed to get reg property\n");
+			of_node_put(child);
 			return ret;
 		}
 
 		if (reg >= MX25_NUM_CFGS) {
 			dev_err(dev,
 				"reg value is greater than the number of available configuration registers\n");
+			of_node_put(child);
 			return -EINVAL;
 		}
 
@@ -228,6 +230,7 @@ static int mx25_gcq_setup_cfgs(struct pl
 			if (IS_ERR(priv->vref[refp])) {
 				dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.",
 					mx25_gcq_refp_names[refp]);
+				of_node_put(child);
 				return PTR_ERR(priv->vref[refp]);
 			}
 			priv->channel_vref_mv[reg] =
@@ -240,6 +243,7 @@ static int mx25_gcq_setup_cfgs(struct pl
 			break;
 		default:
 			dev_err(dev, "Invalid positive reference %d\n", refp);
+			of_node_put(child);
 			return -EINVAL;
 		}
 
@@ -254,10 +258,12 @@ static int mx25_gcq_setup_cfgs(struct pl
 
 		if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
 			dev_err(dev, "Invalid fsl,adc-refp property value\n");
+			of_node_put(child);
 			return -EINVAL;
 		}
 		if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
 			dev_err(dev, "Invalid fsl,adc-refn property value\n");
+			of_node_put(child);
 			return -EINVAL;
 		}
 

[PATCH 4.9 103/141] iio: adc: at91: fix acking DRDY irq on simple conversions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugen Hristev <eugen.hristev@microchip.com>

commit bc1b45326223e7e890053cf6266357adfa61942d upstream.

When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/at91_adc.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -278,6 +278,8 @@ static void handle_adc_eoc_trigger(int i
 		iio_trigger_poll(idev->trig);
 	} else {
 		st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb));
+		/* Needed to ACK the DRDY interruption */
+		at91_adc_readl(st, AT91_ADC_LCDR);
 		st->done = true;
 		wake_up_interruptible(&st->wq_data_avail);
 	}

[PATCH 4.9 104/141] iio: adc: at91: fix wrong channel number in triggered buffer mode

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugen Hristev <eugen.hristev@microchip.com>

commit aea835f2dc8a682942b859179c49ad1841a6c8b9 upstream.

When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/at91_adc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -247,12 +247,14 @@ static irqreturn_t at91_adc_trigger_hand
 	struct iio_poll_func *pf = p;
 	struct iio_dev *idev = pf->indio_dev;
 	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_chan_spec const *chan;
 	int i, j = 0;
 
 	for (i = 0; i < idev->masklength; i++) {
 		if (!test_bit(i, idev->active_scan_mask))
 			continue;
-		st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i));
+		chan = idev->channels + i;
+		st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, chan->channel));
 		j++;
 	}
 

[PATCH 4.9 105/141] w1: omap-hdq: fix missing bus unregister at removal

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Kemnade <andreas@kemnade.info>

commit a007734618fee1bf35556c04fa498d41d42c7301 upstream.

The bus master was not removed after unloading the module
or unbinding the driver. That lead to oopses like this

[  127.842987] Unable to handle kernel paging request at virtual address bf01d04c
[  127.850646] pgd = 70e3cd9a
[  127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000
[  127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[  127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq]
[  127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12
[  127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[  127.890441] PC is at 0xbf01d04c
[  127.893798] LR is at w1_search_process_cb+0x4c/0xfc
[  127.898956] pc : [<bf01d04c>]    lr : [<c05f9580>]    psr: a0070013
[  127.905609] sp : cf885f48  ip : bf01d04c  fp : ddf1e11c
[  127.911132] r10: cf8fe040  r9 : c05f8d00  r8 : cf8fe040
[  127.916656] r7 : 000000f0  r6 : cf8fe02c  r5 : cf8fe000  r4 : cf8fe01c
[  127.923553] r3 : c05f8d00  r2 : 000000f0  r1 : cf8fe000  r0 : dde1ef10
[  127.930450] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  127.938018] Control: 10c5387d  Table: 8f8f0019  DAC: 00000051
[  127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f)
[  127.951171] Stack: (0xcf885f48 to 0xcf886000)
[  127.955810] 5f40:                   cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00
[  127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000
[  127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000
[  127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[  127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[  128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118)
[  128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148)
[  128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8)
[  128.037017] 5fa0:                                     00000000 00000000 00000000 00000000
[  128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  128.061340] Code: bad PC value
[  128.064697] ---[ end trace af066e33c0e14119 ]---

Cc: <stable@vger.kernel.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/w1/masters/omap_hdq.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -784,6 +784,8 @@ static int omap_hdq_remove(struct platfo
 	/* remove module dependency */
 	pm_runtime_disable(&pdev->dev);
 
+	w1_remove_master_device(&omap_w1_master);
+
 	return 0;
 }
 

[PATCH 4.9 106/141] smb3: allow stats which track session and share reconnects to be reset

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <stfrench@microsoft.com>

commit 2c887635cd6ab3af619dc2be94e5bf8f2e172b78 upstream.

Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats
except the session and share reconnect counts.  Fix it to
reset those as well.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifs_debug.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -284,6 +284,9 @@ static ssize_t cifs_stats_proc_write(str
 		atomic_set(&totBufAllocCount, 0);
 		atomic_set(&totSmBufAllocCount, 0);
 #endif /* CONFIG_CIFS_STATS2 */
+		atomic_set(&tcpSesReconnectCount, 0);
+		atomic_set(&tconInfoReconnectCount, 0);
+
 		spin_lock(&GlobalMid_Lock);
 		GlobalMaxActiveXid = 0;
 		GlobalCurrentXid = 0;

[PATCH 4.9 107/141] smb3: do not attempt cifs operation in smb3 query info error path

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <stfrench@microsoft.com>

commit 1e77a8c204c9d1b655c61751b8ad0fde22421dbb upstream.

If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.

We set backup intent on open so no need for this fallback.

See kernel bugzilla 201435

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/inode.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -768,7 +768,15 @@ cifs_get_inode_info(struct inode **inode
 	} else if (rc == -EREMOTE) {
 		cifs_create_dfs_fattr(&fattr, sb);
 		rc = 0;
-	} else if (rc == -EACCES && backup_cred(cifs_sb)) {
+	} else if ((rc == -EACCES) && backup_cred(cifs_sb) &&
+		   (strcmp(server->vals->version_string, SMB1_VERSION_STRING)
+		      == 0)) {
+			/*
+			 * For SMB2 and later the backup intent flag is already
+			 * sent if needed on open and there is no path based
+			 * FindFirst operation to use to retry with
+			 */
+
 			srchinf = kzalloc(sizeof(struct cifs_search_info),
 						GFP_KERNEL);
 			if (srchinf == NULL) {

[PATCH 4.9 108/141] smb3: on kerberos mount if server doesnt specify auth type use krb5

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <stfrench@microsoft.com>

commit 926674de6705f0f1dbf29a62fd758d0977f535d6 upstream.

Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifs_spnego.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -147,8 +147,10 @@ cifs_get_spnego_key(struct cifs_ses *ses
 		sprintf(dp, ";sec=krb5");
 	else if (server->sec_mskerberos)
 		sprintf(dp, ";sec=mskrb5");
-	else
-		goto out;
+	else {
+		cifs_dbg(VFS, "unknown or missing server auth type, use krb5\n");
+		sprintf(dp, ";sec=krb5");
+	}
 
 	dp = description + strlen(description);
 	sprintf(dp, ";uid=0x%x",

[PATCH 4.9 109/141] printk: Fix panic caused by passing log_buf_len to command line

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: He Zhe <zhe.he@windriver.com>

commit 277fcdb2cfee38ccdbe07e705dbd4896ba0c9930 upstream.

log_buf_len_setup does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "log_buf_len",
without its value, is set in command line and thus causes the following
panic.

PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
[    0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[    0.000000] Call Trace:
[    0.000000]  simple_strtoull+0x29/0x70
[    0.000000]  memparse+0x26/0x90
[    0.000000]  log_buf_len_setup+0x17/0x22
[    0.000000]  do_early_param+0x57/0x8e
[    0.000000]  parse_args+0x208/0x320
[    0.000000]  ? rdinit_setup+0x30/0x30
[    0.000000]  parse_early_options+0x29/0x2d
[    0.000000]  ? rdinit_setup+0x30/0x30
[    0.000000]  parse_early_param+0x36/0x4d
[    0.000000]  setup_arch+0x336/0x99e
[    0.000000]  start_kernel+0x6f/0x4ee
[    0.000000]  x86_64_start_reservations+0x24/0x26
[    0.000000]  x86_64_start_kernel+0x6f/0x72
[    0.000000]  secondary_startup_64+0xa4/0xb0

This patch adds a check to prevent the panic.

Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com
Cc: stable@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/printk/printk.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1010,7 +1010,12 @@ static void __init log_buf_len_update(un
 /* save requested log_buf_len since it's too early to process it */
 static int __init log_buf_len_setup(char *str)
 {
-	unsigned size = memparse(str, &str);
+	unsigned int size;
+
+	if (!str)
+		return -EINVAL;
+
+	size = memparse(str, &str);
 
 	log_buf_len_update(size);
 

[PATCH 4.9 110/141] genirq: Fix race on spurious interrupt detection

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukas Wunner <lukas@wunner.de>

commit 746a923b863a1065ef77324e1e43f19b1a3eab5c upstream.

Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of
threaded irqs") made detection of spurious interrupts work for threaded
handlers by:

a) incrementing a counter every time the thread returns IRQ_HANDLED, and
b) checking whether that counter has increased every time the thread is
   woken.

However for oneshot interrupts, the commit unmasks the interrupt before
incrementing the counter.  If another interrupt occurs right after
unmasking but before the counter is incremented, that interrupt is
incorrectly considered spurious:

time
 |  irq_thread()
 |    irq_thread_fn()
 |      action->thread_fn()
 |      irq_finalize_oneshot()
 |        unmask_threaded_irq()            /* interrupt is unmasked */
 |
 |                  /* interrupt fires, incorrectly deemed spurious */
 |
 |    atomic_inc(&desc->threads_handled); /* counter is incremented */
 v

This is observed with a hi3110 CAN controller receiving data at high volume
(from a separate machine sending with "cangen -g 0 -i -x"): The controller
signals a huge number of interrupts (hundreds of millions per day) and
every second there are about a dozen which are deemed spurious.

In theory with high CPU load and the presence of higher priority tasks, the
number of incorrectly detected spurious interrupts might increase beyond
the 99,900 threshold and cause disablement of the interrupt.

In practice it just increments the spurious interrupt count. But that can
cause people to waste time investigating it over and over.

Fix it by moving the accounting before the invocation of
irq_finalize_oneshot().

[ tglx: Folded change log update ]

Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: stable@vger.kernel.org # v3.16+
Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/irq/manage.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -878,6 +878,9 @@ irq_forced_thread_fn(struct irq_desc *de
 
 	local_bh_disable();
 	ret = action->thread_fn(action->irq, action->dev_id);
+	if (ret == IRQ_HANDLED)
+		atomic_inc(&desc->threads_handled);
+
 	irq_finalize_oneshot(desc, action);
 	local_bh_enable();
 	return ret;
@@ -894,6 +897,9 @@ static irqreturn_t irq_thread_fn(struct
 	irqreturn_t ret;
 
 	ret = action->thread_fn(action->irq, action->dev_id);
+	if (ret == IRQ_HANDLED)
+		atomic_inc(&desc->threads_handled);
+
 	irq_finalize_oneshot(desc, action);
 	return ret;
 }
@@ -971,8 +977,6 @@ static int irq_thread(void *data)
 		irq_thread_check_affinity(desc, action);
 
 		action_ret = handler_fn(desc, action);
-		if (action_ret == IRQ_HANDLED)
-			atomic_inc(&desc->threads_handled);
 		if (action_ret == IRQ_WAKE_THREAD)
 			irq_wake_secondary(desc, action);
 

[PATCH 4.9 111/141] NFSv4.1: Fix the r/wsize checking

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 943cff67b842839f4f35364ba2db5c2d3f025d94 upstream.

The intention of nfs4_session_set_rwsize() was to cap the r/wsize to the
buffer sizes negotiated by the CREATE_SESSION. The initial code had a
bug whereby we would not check the values negotiated by nfs_probe_fsinfo()
(the assumption being that CREATE_SESSION will always negotiate buffer values
that are sane w.r.t. the server's preferred r/wsizes) but would only check
values set by the user in the 'mount' command.

The code was changed in 4.11 to _always_ set the r/wsize, meaning that we
now never use the server preferred r/wsizes. This is the regression that
this patch fixes.
Also rename the function to nfs4_session_limit_rwsize() in order to avoid
future confusion.

Fixes: 033853325fe3 (NFSv4.1 respect server's max size in CREATE_SESSION")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4client.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -988,10 +988,10 @@ EXPORT_SYMBOL_GPL(nfs4_set_ds_client);
 
 /*
  * Session has been established, and the client marked ready.
- * Set the mount rsize and wsize with negotiated fore channel
- * attributes which will be bound checked in nfs_server_set_fsinfo.
+ * Limit the mount rsize, wsize and dtsize using negotiated fore
+ * channel attributes.
  */
-static void nfs4_session_set_rwsize(struct nfs_server *server)
+static void nfs4_session_limit_rwsize(struct nfs_server *server)
 {
 #ifdef CONFIG_NFS_V4_1
 	struct nfs4_session *sess;
@@ -1004,9 +1004,11 @@ static void nfs4_session_set_rwsize(stru
 	server_resp_sz = sess->fc_attrs.max_resp_sz - nfs41_maxread_overhead;
 	server_rqst_sz = sess->fc_attrs.max_rqst_sz - nfs41_maxwrite_overhead;
 
-	if (!server->rsize || server->rsize > server_resp_sz)
+	if (server->dtsize > server_resp_sz)
+		server->dtsize = server_resp_sz;
+	if (server->rsize > server_resp_sz)
 		server->rsize = server_resp_sz;
-	if (!server->wsize || server->wsize > server_rqst_sz)
+	if (server->wsize > server_rqst_sz)
 		server->wsize = server_rqst_sz;
 #endif /* CONFIG_NFS_V4_1 */
 }
@@ -1053,12 +1055,12 @@ static int nfs4_server_common_setup(stru
 			(unsigned long long) server->fsid.minor);
 	nfs_display_fhandle(mntfh, "Pseudo-fs root FH");
 
-	nfs4_session_set_rwsize(server);
-
 	error = nfs_probe_fsinfo(server, mntfh, fattr);
 	if (error < 0)
 		goto out;
 
+	nfs4_session_limit_rwsize(server);
+
 	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
 		server->namelen = NFS4_MAXNAMLEN;
 

[PATCH 4.9 112/141] nfsd: Fix an Oops in free_session()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trondmy@gmail.com>

commit bb6ad5572c0022e17e846b382d7413cdcf8055be upstream.

In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/svc_xprt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -1038,7 +1038,7 @@ static void call_xpt_users(struct svc_xp
 	spin_lock(&xprt->xpt_lock);
 	while (!list_empty(&xprt->xpt_users)) {
 		u = list_first_entry(&xprt->xpt_users, struct svc_xpt_user, list);
-		list_del(&u->list);
+		list_del_init(&u->list);
 		u->callback(u);
 	}
 	spin_unlock(&xprt->xpt_lock);

[PATCH 4.9 113/141] lockd: fix access beyond unterminated strings in prints

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amir Goldstein <amir73il@gmail.com>

commit 93f38b6fae0ea8987e22d9e6c38f8dfdccd867ee upstream.

printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/host.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -340,7 +340,7 @@ struct nlm_host *nlmsvc_lookup_host(cons
 	};
 	struct lockd_net *ln = net_generic(net, lockd_net_id);
 
-	dprintk("lockd: %s(host='%*s', vers=%u, proto=%s)\n", __func__,
+	dprintk("lockd: %s(host='%.*s', vers=%u, proto=%s)\n", __func__,
 			(int)hostname_len, hostname, rqstp->rq_vers,
 			(rqstp->rq_prot == IPPROTO_UDP ? "udp" : "tcp"));
 

[PATCH 4.9 114/141] dm ioctl: harden copy_params()s copy_from_user() from malicious users

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wenwen Wang <wang6495@umn.edu>

commit 800a7340ab7dd667edf95e74d8e4f23a17e87076 upstream.

In copy_params(), the struct 'dm_ioctl' is first copied from the user
space buffer 'user' to 'param_kernel' and the field 'data_size' is
checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload
up to its 'data' member).  If the check fails, an error code EINVAL will be
returned.  Otherwise, param_kernel->data_size is used to do a second copy,
which copies from the same user-space buffer to 'dmi'.  After the second
copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'.
Given that the buffer 'user' resides in the user space, a malicious
user-space process can race to change the content in the buffer between
the two copies.  This way, the attacker can inject inconsistent data
into 'dmi' (versus previously validated 'param_kernel').

Fix redundant copying of 'minimum_data_size' from user-space buffer by
using the first copy stored in 'param_kernel'.  Also remove the
'data_size' check after the second copy because it is now unnecessary.

Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-ioctl.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1692,8 +1692,7 @@ static void free_params(struct dm_ioctl
 }
 
 static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl *param_kernel,
-		       int ioctl_flags,
-		       struct dm_ioctl **param, int *param_flags)
+		       int ioctl_flags, struct dm_ioctl **param, int *param_flags)
 {
 	struct dm_ioctl *dmi;
 	int secure_data;
@@ -1738,18 +1737,13 @@ static int copy_params(struct dm_ioctl _
 
 	*param_flags |= DM_PARAMS_MALLOC;
 
-	if (copy_from_user(dmi, user, param_kernel->data_size))
-		goto bad;
+	/* Copy from param_kernel (which was already copied from user) */
+	memcpy(dmi, param_kernel, minimum_data_size);
 
-data_copied:
-	/*
-	 * Abort if something changed the ioctl data while it was being copied.
-	 */
-	if (dmi->data_size != param_kernel->data_size) {
-		DMERR("rejecting ioctl: data size modified while processing parameters");
+	if (copy_from_user(&dmi->data, (char __user *)user + minimum_data_size,
+			   param_kernel->data_size - minimum_data_size))
 		goto bad;
-	}
-
+data_copied:
 	/* Wipe the user buffer so we do not return it to userspace */
 	if (secure_data && clear_user(user, param_kernel->data_size))
 		goto bad;

[PATCH 4.9 115/141] powerpc/msi: Fix compile error on mpc83xx

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 0f99153def98134403c9149128e59d3e1786cf04 upstream.

mpic_get_primary_version() is not defined when not using MPIC.
The compile error log like:

arch/powerpc/sysdev/built-in.o: In function `fsl_of_msi_probe':
fsl_msi.c:(.text+0x150c): undefined reference to `fsl_mpic_primary_get_version'

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Fixes: 807d38b73b6 ("powerpc/mpic: Add get_version API both for internal and external use")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/mpic.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -392,7 +392,14 @@ extern struct bus_type mpic_subsys;
 #define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
 
 /* Get the version of primary MPIC */
+#ifdef CONFIG_MPIC
 extern u32 fsl_mpic_primary_get_version(void);
+#else
+static inline u32 fsl_mpic_primary_get_version(void)
+{
+	return 0;
+}
+#endif
 
 /* Allocate the controller structure and setup the linux irq descs
  * for the range if interrupts passed in. No HW initialization is

[PATCH 4.9 116/141] MIPS: OCTEON: fix out of bounds array access on CN68XX

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaro Koskinen <aaro.koskinen@iki.fi>

commit c0fae7e2452b90c31edd2d25eb3baf0c76b400ca upstream.

The maximum number of interfaces is returned by
cvmx_helper_get_number_of_interfaces(), and the value is used to access
interface_port_count[]. When CN68XX support was added, we forgot
to increase the array size. Fix that.

Fixes: 2c8c3f0201333 ("MIPS: Octeon: Support additional interfaces on CN68XX")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20949/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/cavium-octeon/executive/cvmx-helper.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -67,7 +67,7 @@ void (*cvmx_override_pko_queue_priority)
 void (*cvmx_override_ipd_port_setup) (int ipd_port);
 
 /* Port count per interface */
-static int interface_port_count[5];
+static int interface_port_count[9];
 
 /* Port last configured link info index by IPD/PKO port */
 static cvmx_helper_link_info_t

[PATCH 4.9 117/141] TC: Set DMA masks for devices

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@linux-mips.org>

commit 3f2aa244ee1a0d17ed5b6c86564d2c1b24d1c96b upstream.

Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:

defxx: v1.11 2014/07/01  Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
        0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
        0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
        98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
        0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
        9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
        ...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---

This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.

Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1].  The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.

This removes the warning shown above.

References:

[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
    Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tc/tc.c    |    8 +++++++-
 include/linux/tc.h |    1 +
 2 files changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/tc/tc.c
+++ b/drivers/tc/tc.c
@@ -2,7 +2,7 @@
  *	TURBOchannel bus services.
  *
  *	Copyright (c) Harald Koerfgen, 1998
- *	Copyright (c) 2001, 2003, 2005, 2006  Maciej W. Rozycki
+ *	Copyright (c) 2001, 2003, 2005, 2006, 2018  Maciej W. Rozycki
  *	Copyright (c) 2005  James Simmons
  *
  *	This file is subject to the terms and conditions of the GNU
@@ -10,6 +10,7 @@
  *	directory of this archive for more details.
  */
 #include <linux/compiler.h>
+#include <linux/dma-mapping.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
@@ -92,6 +93,11 @@ static void __init tc_bus_add_devices(st
 		tdev->dev.bus = &tc_bus_type;
 		tdev->slot = slot;
 
+		/* TURBOchannel has 34-bit DMA addressing (16GiB space). */
+		tdev->dma_mask = DMA_BIT_MASK(34);
+		tdev->dev.dma_mask = &tdev->dma_mask;
+		tdev->dev.coherent_dma_mask = DMA_BIT_MASK(34);
+
 		for (i = 0; i < 8; i++) {
 			tdev->firmware[i] =
 				readb(module + offset + TC_FIRM_VER + 4 * i);
--- a/include/linux/tc.h
+++ b/include/linux/tc.h
@@ -84,6 +84,7 @@ struct tc_dev {
 					   device. */
 	struct device	dev;		/* Generic device interface. */
 	struct resource	resource;	/* Address space of this device. */
+	u64		dma_mask;	/* DMA addressable range. */
 	char		vendor[9];
 	char		name[9];
 	char		firmware[9];

[PATCH 4.9 118/141] media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hverkuil@xs4all.nl>

commit 250854eed5d45a73d81e4137dfd85180af6f2ec3 upstream.

When the OSD is on (i.e. vivid displays text on top of the test pattern), and
you enable hflip, then the driver crashes.

The cause turned out to be a division of a negative number by an unsigned value.
You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-(

Fixes: 3e14e7a82c1ef ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: <stable@vger.kernel.org>      # for v4.1 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
+++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
@@ -1650,7 +1650,7 @@ typedef struct { u16 __; u8 _; } __packe
 				pos[7] = (chr & (0x01 << 0) ? fg : bg);	\
 			} \
 	\
-			pos += (tpg->hflip ? -8 : 8) / hdiv;	\
+			pos += (tpg->hflip ? -8 : 8) / (int)hdiv;	\
 		}	\
 	}	\
 } while (0)

[PATCH 4.9 119/141] kgdboc: Passing ekgdboc to command line causes panic

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: He Zhe <zhe.he@windriver.com>

commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.

kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[    0.000000] RIP: 0010:strlen+0x0/0x20
...
[    0.000000] Call Trace
[    0.000000]  ? kgdboc_option_setup+0x9/0xa0
[    0.000000]  ? kgdboc_early_init+0x6/0x1b
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds a check to prevent the panic.

Cc: stable@vger.kernel.org
Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/kgdboc.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -133,6 +133,11 @@ static void kgdboc_unregister_kbd(void)
 
 static int kgdboc_option_setup(char *opt)
 {
+	if (!opt) {
+		pr_err("kgdboc: config string not provided\n");
+		return -EINVAL;
+	}
+
 	if (strlen(opt) >= MAX_CONFIG_LEN) {
 		printk(KERN_ERR "kgdboc: config string too long\n");
 		return -ENOSPC;

[PATCH 4.9 120/141] xen: fix xen_qlock_wait()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Juergen Gross <jgross@suse.com>

commit d3132b3860f6cf35ff7609a76bbcdbb814bd027c upstream.

Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable")
introduced a regression for Xen guests running fully virtualized
(HVM or PVH mode). The Xen hypervisor wouldn't return from the poll
hypercall with interrupts disabled in case of an interrupt (for PV
guests it does).

So instead of disabling interrupts in xen_qlock_wait() use a nesting
counter to avoid calling xen_clear_irq_pending() in case
xen_qlock_wait() is nested.

Fixes: a856531951dc80 ("xen: make xen_qlock_wait() nestable")
Cc: stable@vger.kernel.org
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/spinlock.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -8,6 +8,7 @@
 #include <linux/log2.h>
 #include <linux/gfp.h>
 #include <linux/slab.h>
+#include <linux/atomic.h>
 
 #include <asm/paravirt.h>
 
@@ -19,6 +20,7 @@
 
 static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
 static DEFINE_PER_CPU(char *, irq_name);
+static DEFINE_PER_CPU(atomic_t, xen_qlock_wait_nest);
 static bool xen_pvspin = true;
 
 #include <asm/qspinlock.h>
@@ -39,25 +41,25 @@ static void xen_qlock_kick(int cpu)
  */
 static void xen_qlock_wait(u8 *byte, u8 val)
 {
-	unsigned long flags;
 	int irq = __this_cpu_read(lock_kicker_irq);
+	atomic_t *nest_cnt = this_cpu_ptr(&xen_qlock_wait_nest);
 
 	/* If kicker interrupts not initialized yet, just spin */
 	if (irq == -1 || in_nmi())
 		return;
 
-	/* Guard against reentry. */
-	local_irq_save(flags);
+	/* Detect reentry. */
+	atomic_inc(nest_cnt);
 
-	/* If irq pending already clear it. */
-	if (xen_test_irq_pending(irq)) {
+	/* If irq pending already and no nested call clear it. */
+	if (atomic_read(nest_cnt) == 1 && xen_test_irq_pending(irq)) {
 		xen_clear_irq_pending(irq);
 	} else if (READ_ONCE(*byte) == val) {
 		/* Block until irq becomes pending (or a spurious wakeup) */
 		xen_poll_irq(irq);
 	}
 
-	local_irq_restore(flags);
+	atomic_dec(nest_cnt);
 }
 
 static irqreturn_t dummy_handler(int irq, void *dev_id)

[PATCH 4.9 121/141] media: em28xx: use a default format if TRY_FMT fails

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

commit f823ce2a1202d47110a7ef86b65839f0be8adc38 upstream.

Follow the V4L2 spec, as warned by v4l2-compliance:

	warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat.
	warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see:

warn: v4l2-test-formats.cpp(734): http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html

Cc: stable@vger.kernel.org
Fixes: bddcf63313c6 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/em28xx/em28xx-video.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -1435,9 +1435,9 @@ static int vidioc_try_fmt_vid_cap(struct
 
 	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
 	if (!fmt) {
-		em28xx_videodbg("Fourcc format (%08x) invalid.\n",
-				f->fmt.pix.pixelformat);
-		return -EINVAL;
+		fmt = &format[0];
+		em28xx_videodbg("Fourcc format (%08x) invalid. Using default (%08x).\n",
+				f->fmt.pix.pixelformat, fmt->fourcc);
 	}
 
 	if (dev->board.is_em2800) {

[PATCH 4.9 122/141] media: tvp5150: avoid going past array on v4l2_querymenu()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

commit 5c4c4505b716cb782ad7263091edc466c4d1fbd4 upstream.

The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of
the number of possible values, it requires the number of the maximum
value. In other words, the ARRAY_SIZE() value should be decremented,
otherwise it will go past the array bounds, as warned by KASAN:

[  279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676

[  279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120
[  279.839741] Hardware name:  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
[  279.839743] Call Trace:
[  279.839758]  dump_stack+0x71/0xab
[  279.839807]  ? v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839817]  print_address_description+0x1c9/0x270
[  279.839863]  ? v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839871]  kasan_report+0x237/0x360
[  279.839918]  v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839964]  __video_do_ioctl+0x2c8/0x590 [videodev]
[  279.840011]  ? copy_overflow+0x20/0x20 [videodev]
[  279.840020]  ? avc_ss_reset+0xa0/0xa0
[  279.840028]  ? check_stack_object+0x21/0x60
[  279.840036]  ? __check_object_size+0xe7/0x240
[  279.840080]  video_usercopy+0xed/0x730 [videodev]
[  279.840123]  ? copy_overflow+0x20/0x20 [videodev]
[  279.840167]  ? v4l_enumstd+0x40/0x40 [videodev]
[  279.840177]  ? __handle_mm_fault+0x9f9/0x1ba0
[  279.840186]  ? __pmd_alloc+0x2c0/0x2c0
[  279.840193]  ? __vfs_write+0xb6/0x350
[  279.840200]  ? kernel_read+0xa0/0xa0
[  279.840244]  ? video_usercopy+0x730/0x730 [videodev]
[  279.840284]  v4l2_ioctl+0xa1/0xb0 [videodev]
[  279.840295]  do_vfs_ioctl+0x117/0x8a0
[  279.840303]  ? selinux_file_ioctl+0x211/0x2f0
[  279.840313]  ? ioctl_preallocate+0x120/0x120
[  279.840319]  ? selinux_capable+0x20/0x20
[  279.840332]  ksys_ioctl+0x70/0x80
[  279.840342]  __x64_sys_ioctl+0x3d/0x50
[  279.840351]  do_syscall_64+0x6d/0x1c0
[  279.840361]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  279.840367] RIP: 0033:0x7fdfb46275d7
[  279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48
[  279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7
[  279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003
[  279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902
[  279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0
[  279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000

[  279.840515] The buggy address belongs to the variable:
[  279.840535]  tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150]

Fixes: c43875f66140 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/tvp5150.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -1527,7 +1527,7 @@ static int tvp5150_probe(struct i2c_clie
 			27000000, 1, 27000000);
 	v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops,
 				     V4L2_CID_TEST_PATTERN,
-				     ARRAY_SIZE(tvp5150_test_patterns),
+				     ARRAY_SIZE(tvp5150_test_patterns) - 1,
 				     0, 0, tvp5150_test_patterns);
 	sd->ctrl_handler = &core->hdl;
 	if (core->hdl.error) {

[PATCH 4.9 123/141] media: em28xx: fix input name for Terratec AV 350

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

commit 15644bfa195bd166d0a5ed76ae2d587f719c3dac upstream.

Instead of using a register value, use an AMUX name, as otherwise
VIDIOC_G_AUDIO would fail.

Cc: stable@vger.kernel.org
Fixes: 766ed64de554 ("V4L/DVB (11827): Add support for Terratec Grabster AV350")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/em28xx/em28xx-cards.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2093,13 +2093,13 @@ struct em28xx_board em28xx_boards[] = {
 		.input           = { {
 			.type     = EM28XX_VMUX_COMPOSITE,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = EM28XX_AUDIO_SRC_LINE,
+			.amux     = EM28XX_AMUX_LINE_IN,
 			.gpio     = terratec_av350_unmute_gpio,
 
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = EM28XX_AUDIO_SRC_LINE,
+			.amux     = EM28XX_AMUX_LINE_IN,
 			.gpio     = terratec_av350_unmute_gpio,
 		} },
 	},

[PATCH 4.9 124/141] media: em28xx: make v4l2-compliance happier by starting sequence on zero

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

commit afeaade90db4c5dab93f326d9582be1d5954a198 upstream.

The v4l2-compliance tool complains if a video doesn't start
with a zero sequence number.

While this shouldn't cause any real problem for apps, let's
make it happier, in order to better check the v4l2-compliance
differences before and after patchsets.

This is actually an old issue. It is there since at least its
videobuf2 conversion, e. g. changeset 3829fadc461 ("[media]
em28xx: convert to videobuf2"), if VB1 wouldn't suffer from
the same issue.

Cc: stable@vger.kernel.org
Fixes: d3829fadc461 ("[media] em28xx: convert to videobuf2")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/em28xx/em28xx-video.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -1290,6 +1290,8 @@ static void em28xx_ctrl_notify(struct v4
 {
 	struct em28xx *dev = priv;
 
+	dev->v4l2->field_count = 0;
+
 	/*
 	 * In the case of non-AC97 volume controls, we still need
 	 * to do some setups at em28xx, in order to mute/unmute

[PATCH 4.9 125/141] arm64: lse: remove -fcall-used-x0 flag

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tri Vo <trong@android.com>

commit 2a6c7c367de82951c98a290a21156770f6f82c84 upstream.

x0 is not callee-saved in the PCS. So there is no need to specify
-fcall-used-x0.

Clang doesn't currently support -fcall-used flags. This patch will help
building the kernel with clang.

Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Tri Vo <trong@android.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/lib/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/lib/Makefile
+++ b/arch/arm64/lib/Makefile
@@ -11,7 +11,7 @@ lib-y		:= bitops.o clear_user.o delay.o
 # when supported by the CPU. Result and argument registers are handled
 # correctly, based on the function prototype.
 lib-$(CONFIG_ARM64_LSE_ATOMICS) += atomic_ll_sc.o
-CFLAGS_atomic_ll_sc.o	:= -fcall-used-x0 -ffixed-x1 -ffixed-x2		\
+CFLAGS_atomic_ll_sc.o	:= -ffixed-x1 -ffixed-x2        		\
 		   -ffixed-x3 -ffixed-x4 -ffixed-x5 -ffixed-x6		\
 		   -ffixed-x7 -fcall-saved-x8 -fcall-saved-x9		\
 		   -fcall-saved-x10 -fcall-saved-x11 -fcall-saved-x12	\

[PATCH 4.9 126/141] rpmsg: smd: fix memory leak on channel create

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit 940c620d6af8fca7d115de40f19870fba415efac upstream.

Currently a failed allocation of channel->name leads to an
immediate return without freeing channel. Fix this by setting
ret to -ENOMEM and jumping to an exit path that kfree's channel.

Detected by CoverityScan, CID#1473692 ("Resource Leak")

Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rpmsg/qcom_smd.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1012,8 +1012,10 @@ static struct qcom_smd_channel *qcom_smd
 
 	channel->edge = edge;
 	channel->name = kstrdup(name, GFP_KERNEL);
-	if (!channel->name)
-		return ERR_PTR(-ENOMEM);
+	if (!channel->name) {
+		ret = -ENOMEM;
+		goto free_channel;
+	}
 
 	mutex_init(&channel->tx_lock);
 	spin_lock_init(&channel->recv_lock);
@@ -1062,6 +1064,7 @@ static struct qcom_smd_channel *qcom_smd
 
 free_name_and_channel:
 	kfree(channel->name);
+free_channel:
 	kfree(channel);
 
 	return ERR_PTR(ret);

[PATCH 4.9 127/141] Cramfs: fix abad comparison when wrap-arounds occur

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Pitre <nicolas.pitre@linaro.org>

commit 672ca9dd13f1aca0c17516f76fc5b0e8344b3e46 upstream.

It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cramfs/inode.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -186,7 +186,8 @@ static void *cramfs_read(struct super_bl
 			continue;
 		blk_offset = (blocknr - buffer_blocknr[i]) << PAGE_SHIFT;
 		blk_offset += offset;
-		if (blk_offset + len > BUFFER_SIZE)
+		if (blk_offset > BUFFER_SIZE ||
+		    blk_offset + len > BUFFER_SIZE)
 			continue;
 		return read_buffers[i] + blk_offset;
 	}

[PATCH 4.9 128/141] arm64: dts: stratix10: Correct System Manager register size

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thor Thayer <thor.thayer@linux.intel.com>

commit 74121b9aa3cd571ddfff014a9f47db36cae3cda9 upstream.

Correct the register size of the System Manager node.

Cc: stable@vger.kernel.org
Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi")
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -249,7 +249,7 @@
 
 		sysmgr: sysmgr@ffd12000 {
 			compatible = "altr,sys-mgr", "syscon";
-			reg = <0xffd12000 0x1000>;
+			reg = <0xffd12000 0x228>;
 		};
 
 		/* Local timer */

[PATCH 4.9 129/141] soc/tegra: pmc: Fix child-node lookup

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 1dc6bd5e39a29453bdcc17348dd2a89f1aa4004e upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent pmc node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.

Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC")
Cc: stable <stable@vger.kernel.org>     # 4.0
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/soc/tegra/pmc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -1189,7 +1189,7 @@ static void tegra_pmc_init_tsense_reset(
 	if (!pmc->soc->has_tsense_reset)
 		return;
 
-	np = of_find_node_by_name(pmc->dev->of_node, "i2c-thermtrip");
+	np = of_get_child_by_name(pmc->dev->of_node, "i2c-thermtrip");
 	if (!np) {
 		dev_warn(dev, "i2c-thermtrip node not found, %s.\n", disabled);
 		return;

[PATCH 4.9 130/141] btrfs: Handle owner mismatch gracefully when walking up tree

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qu Wenruo <wqu@suse.com>

commit 65c6e82becec33731f48786e5a30f98662c86b16 upstream.

[BUG]
When mounting certain crafted image, btrfs will trigger kernel BUG_ON()
when trying to recover balance:

  kernel BUG at fs/btrfs/extent-tree.c:8956!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 1 PID: 662 Comm: mount Not tainted 4.18.0-rc1-custom+ #10
  RIP: 0010:walk_up_proc+0x336/0x480 [btrfs]
  RSP: 0018:ffffb53540c9b890 EFLAGS: 00010202
  Call Trace:
   walk_up_tree+0x172/0x1f0 [btrfs]
   btrfs_drop_snapshot+0x3a4/0x830 [btrfs]
   merge_reloc_roots+0xe1/0x1d0 [btrfs]
   btrfs_recover_relocation+0x3ea/0x420 [btrfs]
   open_ctree+0x1af3/0x1dd0 [btrfs]
   btrfs_mount_root+0x66b/0x740 [btrfs]
   mount_fs+0x3b/0x16a
   vfs_kern_mount.part.9+0x54/0x140
   btrfs_mount+0x16d/0x890 [btrfs]
   mount_fs+0x3b/0x16a
   vfs_kern_mount.part.9+0x54/0x140
   do_mount+0x1fd/0xda0
   ksys_mount+0xba/0xd0
   __x64_sys_mount+0x21/0x30
   do_syscall_64+0x60/0x210
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

[CAUSE]
Extent tree corruption.  In this particular case, reloc tree root's
owner is DATA_RELOC_TREE (should be TREE_RELOC), thus its backref is
corrupted and we failed the owner check in walk_up_tree().

[FIX]
It's pretty hard to take care of every extent tree corruption, but at
least we can remove such BUG_ON() and exit more gracefully.

And since in this particular image, DATA_RELOC_TREE and TREE_RELOC share
the same root (which is obviously invalid), we needs to make
__del_reloc_root() more robust to detect such invalid sharing to avoid
possible NULL dereference as root->node can be NULL in this case.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200411
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |   18 ++++++++++++------
 fs/btrfs/relocation.c  |    2 +-
 2 files changed, 13 insertions(+), 7 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -9100,15 +9100,14 @@ static noinline int walk_up_proc(struct
 	if (eb == root->node) {
 		if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
 			parent = eb->start;
-		else
-			BUG_ON(root->root_key.objectid !=
-			       btrfs_header_owner(eb));
+		else if (root->root_key.objectid != btrfs_header_owner(eb))
+			goto owner_mismatch;
 	} else {
 		if (wc->flags[level + 1] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
 			parent = path->nodes[level + 1]->start;
-		else
-			BUG_ON(root->root_key.objectid !=
-			       btrfs_header_owner(path->nodes[level + 1]));
+		else if (root->root_key.objectid !=
+			 btrfs_header_owner(path->nodes[level + 1]))
+			goto owner_mismatch;
 	}
 
 	btrfs_free_tree_block(trans, root, eb, parent, wc->refs[level] == 1);
@@ -9116,6 +9115,11 @@ out:
 	wc->refs[level] = 0;
 	wc->flags[level] = 0;
 	return 0;
+
+owner_mismatch:
+	btrfs_err_rl(root->fs_info, "unexpected tree owner, have %llu expect %llu",
+		     btrfs_header_owner(eb), root->root_key.objectid);
+	return -EUCLEAN;
 }
 
 static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
@@ -9169,6 +9173,8 @@ static noinline int walk_up_tree(struct
 			ret = walk_up_proc(trans, root, path, wc);
 			if (ret > 0)
 				return 0;
+			if (ret < 0)
+				return ret;
 
 			if (path->locks[level]) {
 				btrfs_tree_unlock_rw(path->nodes[level],
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1325,7 +1325,7 @@ static void __del_reloc_root(struct btrf
 	struct mapping_node *node = NULL;
 	struct reloc_control *rc = root->fs_info->reloc_ctl;
 
-	if (rc) {
+	if (rc && root->node) {
 		spin_lock(&rc->reloc_root_tree.lock);
 		rb_node = tree_search(&rc->reloc_root_tree.rb_root,
 				      root->node->start);

[PATCH 4.9 131/141] btrfs: locking: Add extra check in btrfs_init_new_buffer() to avoid deadlock

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qu Wenruo <wqu@suse.com>

commit b72c3aba09a53fc7c1824250d71180ca154517a7 upstream.

[BUG]
For certain crafted image, whose csum root leaf has missing backref, if
we try to trigger write with data csum, it could cause deadlock with the
following kernel WARN_ON():

  WARNING: CPU: 1 PID: 41 at fs/btrfs/locking.c:230 btrfs_tree_lock+0x3e2/0x400
  CPU: 1 PID: 41 Comm: kworker/u4:1 Not tainted 4.18.0-rc1+ #8
  Workqueue: btrfs-endio-write btrfs_endio_write_helper
  RIP: 0010:btrfs_tree_lock+0x3e2/0x400
  Call Trace:
   btrfs_alloc_tree_block+0x39f/0x770
   __btrfs_cow_block+0x285/0x9e0
   btrfs_cow_block+0x191/0x2e0
   btrfs_search_slot+0x492/0x1160
   btrfs_lookup_csum+0xec/0x280
   btrfs_csum_file_blocks+0x2be/0xa60
   add_pending_csums+0xaf/0xf0
   btrfs_finish_ordered_io+0x74b/0xc90
   finish_ordered_fn+0x15/0x20
   normal_work_helper+0xf6/0x500
   btrfs_endio_write_helper+0x12/0x20
   process_one_work+0x302/0x770
   worker_thread+0x81/0x6d0
   kthread+0x180/0x1d0
   ret_from_fork+0x35/0x40

[CAUSE]
That crafted image has missing backref for csum tree root leaf.  And
when we try to allocate new tree block, since there is no
EXTENT/METADATA_ITEM for csum tree root, btrfs consider it's free slot
and use it.

The extent tree of the image looks like:

  Normal image                      |       This fuzzed image
  ----------------------------------+--------------------------------
  BG 29360128                       | BG 29360128
   One empty slot                   |  One empty slot
  29364224: backref to UUID tree    | 29364224: backref to UUID tree
   Two empty slots                  |  Two empty slots
  29376512: backref to CSUM tree    |  One empty slot (bad type) <<<
  29380608: backref to D_RELOC tree | 29380608: backref to D_RELOC tree
  ...                               | ...

Since bytenr 29376512 has no METADATA/EXTENT_ITEM, when btrfs try to
alloc tree block, it's an valid slot for btrfs.

And for finish_ordered_write, when we need to insert csum, we try to CoW
csum tree root.

By accident, empty slots at bytenr BG_OFFSET, BG_OFFSET + 8K,
BG_OFFSET + 12K is already used by tree block COW for other trees, the
next empty slot is BG_OFFSET + 16K, which should be the backref for CSUM
tree.

But due to the bad type, btrfs can recognize it and still consider it as
an empty slot, and will try to use it for csum tree CoW.

Then in the following call trace, we will try to lock the new tree
block, which turns out to be the old csum tree root which is already
locked:

btrfs_search_slot() called on csum tree root, which is at 29376512
|- btrfs_cow_block()
   |- btrfs_set_lock_block()
   |  |- Now locks tree block 29376512 (old csum tree root)
   |- __btrfs_cow_block()
      |- btrfs_alloc_tree_block()
         |- btrfs_reserve_extent()
            | Now it returns tree block 29376512, which extent tree
            | shows its empty slot, but it's already hold by csum tree
            |- btrfs_init_new_buffer()
               |- btrfs_tree_lock()
                  | Triggers WARN_ON(eb->lock_owner == current->pid)
                  |- wait_event()
                     Wait lock owner to release the lock, but it's
                     locked by ourself, so it will deadlock

[FIX]
This patch will do the lock_owner and current->pid check at
btrfs_init_new_buffer().
So above deadlock can be avoided.

Since such problem can only happen in crafted image, we will still
trigger kernel warning for later aborted transaction, but with a little
more meaningful warning message.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200405
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -8263,6 +8263,19 @@ btrfs_init_new_buffer(struct btrfs_trans
 	if (IS_ERR(buf))
 		return buf;
 
+	/*
+	 * Extra safety check in case the extent tree is corrupted and extent
+	 * allocator chooses to use a tree block which is already used and
+	 * locked.
+	 */
+	if (buf->lock_owner == current->pid) {
+		btrfs_err_rl(root->fs_info,
+"tree block %llu owner %llu already locked by pid=%d, extent tree corruption detected",
+			buf->start, btrfs_header_owner(buf), current->pid);
+		free_extent_buffer(buf);
+		return ERR_PTR(-EUCLEAN);
+	}
+
 	btrfs_set_header_generation(buf, trans->transid);
 	btrfs_set_buffer_lockdep_class(root->root_key.objectid, buf, level);
 	btrfs_tree_lock(buf);

[PATCH 4.9 132/141] btrfs: fix error handling in free_log_tree

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Mahoney <jeffm@suse.com>

commit 374b0e2d6ba5da7fd1cadb3247731ff27d011f6f upstream.

When we hit an I/O error in free_log_tree->walk_log_tree during file system
shutdown we can crash due to there not being a valid transaction handle.

Use btrfs_handle_fs_error when there's no transaction handle to use.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
  IP: free_log_tree+0xd2/0x140 [btrfs]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  Modules linked in: <modules>
  CPU: 2 PID: 23544 Comm: umount Tainted: G        W        4.12.14-kvmsmall #9 SLE15 (unreleased)
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  task: ffff96bfd3478880 task.stack: ffffa7cf40d78000
  RIP: 0010:free_log_tree+0xd2/0x140 [btrfs]
  RSP: 0018:ffffa7cf40d7bd10 EFLAGS: 00010282
  RAX: 00000000fffffffb RBX: 00000000fffffffb RCX: 0000000000000002
  RDX: 0000000000000000 RSI: ffff96c02f07d4c8 RDI: 0000000000000282
  RBP: ffff96c013cf1000 R08: ffff96c02f07d4c8 R09: ffff96c02f07d4d0
  R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000
  R13: ffff96c005e800c0 R14: ffffa7cf40d7bdb8 R15: 0000000000000000
  FS:  00007f17856bcfc0(0000) GS:ffff96c03f600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000060 CR3: 0000000045ed6002 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ? wait_for_writer+0xb0/0xb0 [btrfs]
   btrfs_free_log+0x17/0x30 [btrfs]
   btrfs_drop_and_free_fs_root+0x9a/0xe0 [btrfs]
   btrfs_free_fs_roots+0xc0/0x130 [btrfs]
   ? wait_for_completion+0xf2/0x100
   close_ctree+0xea/0x2e0 [btrfs]
   ? kthread_stop+0x161/0x260
   generic_shutdown_super+0x6c/0x120
   kill_anon_super+0xe/0x20
   btrfs_kill_super+0x13/0x100 [btrfs]
   deactivate_locked_super+0x3f/0x70
   cleanup_mnt+0x3b/0x70
   task_work_run+0x78/0x90
   exit_to_usermode_loop+0x77/0xa6
   do_syscall_64+0x1c5/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7
  RIP: 0033:0x7f1784f90827
  RSP: 002b:00007ffdeeb03118 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 0000556a60c62970 RCX: 00007f1784f90827
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556a60c62b50
  RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff
  R10: 0000556a60c63900 R11: 0000000000000246 R12: 0000556a60c62b50
  R13: 00007f17854a81c4 R14: 0000000000000000 R15: 0000000000000000
  RIP: free_log_tree+0xd2/0x140 [btrfs] RSP: ffffa7cf40d7bd10
  CR2: 0000000000000060

Fixes: 681ae50917df9 ("Btrfs: cleanup reserved space when freeing tree log on error")
CC: <stable@vger.kernel.org> # v3.13
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3016,9 +3016,12 @@ static void free_log_tree(struct btrfs_t
 	};
 
 	ret = walk_log_tree(trans, log, &wc);
-	/* I don't think this can happen but just in case */
-	if (ret)
-		btrfs_abort_transaction(trans, ret);
+	if (ret) {
+		if (trans)
+			btrfs_abort_transaction(trans, ret);
+		else
+			btrfs_handle_fs_error(log->fs_info, ret, NULL);
+	}
 
 	while (1) {
 		ret = find_first_extent_bit(&log->dirty_log_pages,

[PATCH 4.9 133/141] btrfs: iterate all devices during trim, instead of fs_devices::alloc_list

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Mahoney <jeffm@suse.com>

commit d4e329de5e5e21594df2e0dd59da9acee71f133b upstream.

btrfs_trim_fs iterates over the fs_devices->alloc_list while holding the
device_list_mutex.  The problem is that ->alloc_list is protected by the
chunk mutex.  We don't want to hold the chunk mutex over the trim of the
entire file system.  Fortunately, the ->dev_list list is protected by
the dev_list mutex and while it will give us all devices, including
read-only devices, we already just skip the read-only devices.  Then we
can continue to take and release the chunk mutex while scanning each
device.

Fixes: 499f377f49f ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -11193,8 +11193,8 @@ int btrfs_trim_fs(struct btrfs_root *roo
 	}
 
 	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
-	devices = &root->fs_info->fs_devices->alloc_list;
-	list_for_each_entry(device, devices, dev_alloc_list) {
+	devices = &root->fs_info->fs_devices->devices;
+	list_for_each_entry(device, devices, dev_list) {
 		ret = btrfs_trim_free_extents(device, range->minlen,
 					      &group_trimmed);
 		if (ret)

[PATCH 4.9 134/141] btrfs: dont attempt to trim devices that dont support it

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Mahoney <jeffm@suse.com>

commit 0be88e367fd8fbdb45257615d691f4675dda062f upstream.

We check whether any device the file system is using supports discard in
the ioctl call, but then we attempt to trim free extents on every device
regardless of whether discard is supported.  Due to the way we mask off
EOPNOTSUPP, we can end up issuing the trim operations on each free range
on devices that don't support it, just wasting time.

Fixes: 499f377f49f08 ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -11071,6 +11071,10 @@ static int btrfs_trim_free_extents(struc
 
 	*trimmed = 0;
 
+	/* Discard not supported = nothing to do. */
+	if (!blk_queue_discard(bdev_get_queue(device->bdev)))
+		return 0;
+
 	/* Not writeable = nothing to do. */
 	if (!device->writeable)
 		return 0;

[PATCH 4.9 135/141] btrfs: wait on caching when putting the bg cache

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <josef@toxicpanda.com>

commit 3aa7c7a31c26321696b92841d5103461c6f3f517 upstream.

While testing my backport I noticed there was a panic if I ran
generic/416 generic/417 generic/418 all in a row.  This just happened to
uncover a race where we had outstanding IO after we destroy all of our
workqueues, and then we'd go to queue the endio work on those free'd
workqueues.

This is because we aren't waiting for the caching threads to be done
before freeing everything up, so to fix this make sure we wait on any
outstanding caching that's being done before we free up the block group,
so we're sure to be done with all IO by the time we get to
btrfs_stop_all_workers().  This fixes the panic I was seeing
consistently in testing.

------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:6112!
SMP PTI
Modules linked in:
CPU: 1 PID: 27165 Comm: kworker/u4:7 Not tainted 4.16.0-02155-g3553e54a578d-dirty #875
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: btrfs-cache btrfs_cache_helper
RIP: 0010:btrfs_map_bio+0x346/0x370
RSP: 0000:ffffc900061e79d0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff880071542e00 RCX: 0000000000533000
RDX: ffff88006bb74380 RSI: 0000000000000008 RDI: ffff880078160000
RBP: 0000000000000001 R08: ffff8800781cd200 R09: 0000000000503000
R10: ffff88006cd21200 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8800781cd200 R15: ffff880071542e00
FS:  0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000817ffc4 CR3: 0000000078314000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 btree_submit_bio_hook+0x8a/0xd0
 submit_one_bio+0x5d/0x80
 read_extent_buffer_pages+0x18a/0x320
 btree_read_extent_buffer_pages+0xbc/0x200
 ? alloc_extent_buffer+0x359/0x3e0
 read_tree_block+0x3d/0x60
 read_block_for_search.isra.30+0x1a5/0x360
 btrfs_search_slot+0x41b/0xa10
 btrfs_next_old_leaf+0x212/0x470
 caching_thread+0x323/0x490
 normal_work_helper+0xc5/0x310
 process_one_work+0x141/0x340
 worker_thread+0x44/0x3c0
 kthread+0xf8/0x130
 ? process_one_work+0x340/0x340
 ? kthread_bind+0x10/0x10
 ret_from_fork+0x35/0x40
RIP: btrfs_map_bio+0x346/0x370 RSP: ffffc900061e79d0
---[ end trace 827eb13e50846033 ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -9952,6 +9952,7 @@ void btrfs_put_block_group_cache(struct
 
 		block_group = btrfs_lookup_first_block_group(info, last);
 		while (block_group) {
+			wait_block_group_cache_done(block_group);
 			spin_lock(&block_group->lock);
 			if (block_group->iref)
 				break;

[PATCH 4.9 136/141] btrfs: reset max_extent_size on clear in a bitmap

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <jbacik@fb.com>

commit 553cceb49681d60975d00892877d4c871bf220f9 upstream.

We need to clear the max_extent_size when we clear bits from a bitmap
since it could have been from the range that contains the
max_extent_size.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/free-space-cache.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -1693,6 +1693,8 @@ static inline void __bitmap_clear_bits(s
 	bitmap_clear(info->bitmap, start, count);
 
 	info->bytes -= bytes;
+	if (info->max_extent_size > ctl->unit)
+		info->max_extent_size = 0;
 }
 
 static void bitmap_clear_bits(struct btrfs_free_space_ctl *ctl,

[PATCH 4.9 137/141] btrfs: make sure we create all new block groups

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <josef@toxicpanda.com>

commit 545e3366db823dc3342ca9d7fea803f829c9062f upstream.

Allocating new chunks modifies both the extent and chunk tree, which can
trigger new chunk allocations.  So instead of doing list_for_each_safe,
just do while (!list_empty()) so we make sure we don't exit with other
pending bg's still on our list.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -10352,7 +10352,7 @@ error:
 void btrfs_create_pending_block_groups(struct btrfs_trans_handle *trans,
 				       struct btrfs_root *root)
 {
-	struct btrfs_block_group_cache *block_group, *tmp;
+	struct btrfs_block_group_cache *block_group;
 	struct btrfs_root *extent_root = root->fs_info->extent_root;
 	struct btrfs_block_group_item item;
 	struct btrfs_key key;
@@ -10360,7 +10360,10 @@ void btrfs_create_pending_block_groups(s
 	bool can_flush_pending_bgs = trans->can_flush_pending_bgs;
 
 	trans->can_flush_pending_bgs = false;
-	list_for_each_entry_safe(block_group, tmp, &trans->new_bgs, bg_list) {
+	while (!list_empty(&trans->new_bgs)) {
+		block_group = list_first_entry(&trans->new_bgs,
+					       struct btrfs_block_group_cache,
+					       bg_list);
 		if (ret)
 			goto next;
 

[PATCH 4.9 138/141] Btrfs: fix wrong dentries after fsync of file that got its parent replaced

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 0f375eed92b5a407657532637ed9652611a682f5 upstream.

In a scenario like the following:

  mkdir /mnt/A               # inode 258
  mkdir /mnt/B               # inode 259
  touch /mnt/B/bar           # inode 260

  sync

  mv /mnt/B/bar /mnt/A/bar
  mv -T /mnt/A /mnt/B
  fsync /mnt/B/bar

  <power fail>

After replaying the log we end up with file bar having 2 hard links, both
with the name 'bar' and one in the directory with inode number 258 and the
other in the directory with inode number 259. Also, we end up with the
directory inode 259 still existing and with the directory inode 258 still
named as 'A', instead of 'B'. In this scenario, file 'bar' should only
have one hard link, located at directory inode 258, the directory inode
259 should not exist anymore and the name for directory inode 258 should
be 'B'.

This incorrect behaviour happens because when attempting to log the old
parents of an inode, we skip any parents that no longer exist. Fix this
by forcing a full commit if an old parent no longer exists.

A test case for fstests follows soon.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |   30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -5373,9 +5373,33 @@ static int btrfs_log_all_parents(struct
 
 			dir_inode = btrfs_iget(root->fs_info->sb, &inode_key,
 					       root, NULL);
-			/* If parent inode was deleted, skip it. */
-			if (IS_ERR(dir_inode))
-				continue;
+			/*
+			 * If the parent inode was deleted, return an error to
+			 * fallback to a transaction commit. This is to prevent
+			 * getting an inode that was moved from one parent A to
+			 * a parent B, got its former parent A deleted and then
+			 * it got fsync'ed, from existing at both parents after
+			 * a log replay (and the old parent still existing).
+			 * Example:
+			 *
+			 * mkdir /mnt/A
+			 * mkdir /mnt/B
+			 * touch /mnt/B/bar
+			 * sync
+			 * mv /mnt/B/bar /mnt/A/bar
+			 * mv -T /mnt/A /mnt/B
+			 * fsync /mnt/B/bar
+			 * <power fail>
+			 *
+			 * If we ignore the old parent B which got deleted,
+			 * after a log replay we would have file bar linked
+			 * at both parents and the old parent B would still
+			 * exist.
+			 */
+			if (IS_ERR(dir_inode)) {
+				ret = PTR_ERR(dir_inode);
+				goto out;
+			}
 
 			if (ctx)
 				ctx->log_new_dentries = false;

[PATCH 4.9 139/141] btrfs: qgroup: Dirty all qgroups before rescan

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qu Wenruo <wqu@suse.com>

commit 9c7b0c2e8dbfbcd80a71e2cbfe02704f26c185c6 upstream.

[BUG]
In the following case, rescan won't zero out the number of qgroup 1/0:

  $ mkfs.btrfs -fq $DEV
  $ mount $DEV /mnt

  $ btrfs quota enable /mnt
  $ btrfs qgroup create 1/0 /mnt
  $ btrfs sub create /mnt/sub
  $ btrfs qgroup assign 0/257 1/0 /mnt

  $ dd if=/dev/urandom of=/mnt/sub/file bs=1k count=1000
  $ btrfs sub snap /mnt/sub /mnt/snap
  $ btrfs quota rescan -w /mnt
  $ btrfs qgroup show -pcre /mnt
  qgroupid         rfer         excl     max_rfer     max_excl parent  child
  --------         ----         ----     --------     -------- ------  -----
  0/5          16.00KiB     16.00KiB         none         none ---     ---
  0/257      1016.00KiB     16.00KiB         none         none 1/0     ---
  0/258      1016.00KiB     16.00KiB         none         none ---     ---
  1/0        1016.00KiB     16.00KiB         none         none ---     0/257

So far so good, but:

  $ btrfs qgroup remove 0/257 1/0 /mnt
  WARNING: quotas may be inconsistent, rescan needed
  $ btrfs quota rescan -w /mnt
  $ btrfs qgroup show -pcre  /mnt
  qgoupid         rfer         excl     max_rfer     max_excl parent  child
  --------         ----         ----     --------     -------- ------  -----
  0/5          16.00KiB     16.00KiB         none         none ---     ---
  0/257      1016.00KiB     16.00KiB         none         none ---     ---
  0/258      1016.00KiB     16.00KiB         none         none ---     ---
  1/0        1016.00KiB     16.00KiB         none         none ---     ---
	     ^^^^^^^^^^     ^^^^^^^^ not cleared

[CAUSE]
Before rescan we call qgroup_rescan_zero_tracking() to zero out all
qgroups' accounting numbers.

However we don't mark all qgroups dirty, but rely on rescan to do so.

If we have any high level qgroup without children, it won't be marked
dirty during rescan, since we cannot reach that qgroup.

This will cause QGROUP_INFO items of childless qgroups never get updated
in the quota tree, thus their numbers will stay the same in "btrfs
qgroup show" output.

[FIX]
Just mark all qgroups dirty in qgroup_rescan_zero_tracking(), so even if
we have childless qgroups, their QGROUP_INFO items will still get
updated during rescan.

Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Tested-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/qgroup.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -2498,6 +2498,7 @@ qgroup_rescan_zero_tracking(struct btrfs
 		qgroup->rfer_cmpr = 0;
 		qgroup->excl = 0;
 		qgroup->excl_cmpr = 0;
+		qgroup_dirty(fs_info, qgroup);
 	}
 	spin_unlock(&fs_info->qgroup_lock);
 }

[PATCH 4.9 140/141] Btrfs: fix null pointer dereference on compressed write path error

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 3527a018c00e5dbada2f9d7ed5576437b6dd5cfb upstream.

At inode.c:compress_file_range(), under the "free_pages_out" label, we can
end up dereferencing the "pages" pointer when it has a NULL value. This
case happens when "start" has a value of 0 and we fail to allocate memory
for the "pages" pointer. When that happens we jump to the "cont" label and
then enter the "if (start == 0)" branch where we immediately call the
cow_file_range_inline() function. If that function returns 0 (success
creating an inline extent) or an error (like -ENOMEM for example) we jump
to the "free_pages_out" label and then access "pages[i]" leading to a NULL
pointer dereference, since "nr_pages" has a value greater than zero at
that point.

Fix this by setting "nr_pages" to 0 when we fail to allocate memory for
the "pages" pointer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201119
Fixes: 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -489,6 +489,7 @@ again:
 		pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS);
 		if (!pages) {
 			/* just bail out to the uncompressed code */
+			nr_pages = 0;
 			goto cont;
 		}
 

[PATCH 4.9 141/141] btrfs: set max_extent_size properly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <jbacik@fb.com>

commit ad22cf6ea47fa20fbe11ac324a0a15c0a9a4a2a9 upstream.

We can't use entry->bytes if our entry is a bitmap entry, we need to use
entry->max_extent_size in that case.  Fix up all the logic to make this
consistent.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/free-space-cache.c |   30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -1778,6 +1778,13 @@ static int search_bitmap(struct btrfs_fr
 	return -1;
 }
 
+static inline u64 get_max_extent_size(struct btrfs_free_space *entry)
+{
+	if (entry->bitmap)
+		return entry->max_extent_size;
+	return entry->bytes;
+}
+
 /* Cache the size of the max extent in bytes */
 static struct btrfs_free_space *
 find_free_space(struct btrfs_free_space_ctl *ctl, u64 *offset, u64 *bytes,
@@ -1799,8 +1806,8 @@ find_free_space(struct btrfs_free_space_
 	for (node = &entry->offset_index; node; node = rb_next(node)) {
 		entry = rb_entry(node, struct btrfs_free_space, offset_index);
 		if (entry->bytes < *bytes) {
-			if (entry->bytes > *max_extent_size)
-				*max_extent_size = entry->bytes;
+			*max_extent_size = max(get_max_extent_size(entry),
+					       *max_extent_size);
 			continue;
 		}
 
@@ -1818,8 +1825,8 @@ find_free_space(struct btrfs_free_space_
 		}
 
 		if (entry->bytes < *bytes + align_off) {
-			if (entry->bytes > *max_extent_size)
-				*max_extent_size = entry->bytes;
+			*max_extent_size = max(get_max_extent_size(entry),
+					       *max_extent_size);
 			continue;
 		}
 
@@ -1831,8 +1838,10 @@ find_free_space(struct btrfs_free_space_
 				*offset = tmp;
 				*bytes = size;
 				return entry;
-			} else if (size > *max_extent_size) {
-				*max_extent_size = size;
+			} else {
+				*max_extent_size =
+					max(get_max_extent_size(entry),
+					    *max_extent_size);
 			}
 			continue;
 		}
@@ -2691,8 +2700,8 @@ static u64 btrfs_alloc_from_bitmap(struc
 
 	err = search_bitmap(ctl, entry, &search_start, &search_bytes, true);
 	if (err) {
-		if (search_bytes > *max_extent_size)
-			*max_extent_size = search_bytes;
+		*max_extent_size = max(get_max_extent_size(entry),
+				       *max_extent_size);
 		return 0;
 	}
 
@@ -2729,8 +2738,9 @@ u64 btrfs_alloc_from_cluster(struct btrf
 
 	entry = rb_entry(node, struct btrfs_free_space, offset_index);
 	while (1) {
-		if (entry->bytes < bytes && entry->bytes > *max_extent_size)
-			*max_extent_size = entry->bytes;
+		if (entry->bytes < bytes)
+			*max_extent_size = max(get_max_extent_size(entry),
+					       *max_extent_size);
 
 		if (entry->bytes < bytes ||
 		    (!entry->bitmap && entry->offset < min_start)) {

Re: [PATCH 4.9 000/141] 4.9.137-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 81 boots: 1 failed, 60 passed with 14 offline, 6 conflicts (v4.9.136-142-gdc28287de643)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.136-142-gdc28287de643/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.136-142-gdc28287de643/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.136-142-gdc28287de643
Git Commit: dc28287de6435c38a38eb37a44e19832497d0c63
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 43 unique boards, 20 SoC families, 16 builds out of 182

Boot Regressions Detected:

arm:

    multi_v7_defconfig:
        imx6q-sabrelite:
            lab-baylibre: failing since 1 day (last pass: v4.9.135-156-gdb1dd7ad04c4 - first fail: v4.9.136)
        meson8b-odroidc1:
            lab-baylibre: failing since 1 day (last pass: v4.9.135-156-gdb1dd7ad04c4 - first fail: v4.9.136)

arm64:

    defconfig:
        meson-gxbb-p200:
            lab-baylibre: failing since 1 day (last pass: v4.9.135-172-gcc46a1dedc8b - first fail: v4.9.136)
        qemu:
            lab-baylibre: failing since 1 day (last pass: v4.9.135-172-gcc46a1dedc8b - first fail: v4.9.136)

x86:

    x86_64_defconfig:
        qemu:
            lab-baylibre: failing since 1 day (last pass: v4.9.135-172-gcc46a1dedc8b - first fail: v4.9.136)

Boot Failure Detected:

arm:

    multi_v7_defconfig
        imx6q-sabrelite: 1 failed lab

Offline Platforms:

arm:

    omap2plus_defconfig:
        am335x-boneblack: 1 offline lab

    sunxi_defconfig:
        sun5i-r8-chip: 1 offline lab

    tegra_defconfig:
        tegra124-jetson-tk1: 1 offline lab

    bcm2835_defconfig:
        bcm2835-rpi-b: 1 offline lab

    sama5_defconfig:
        at91-sama5d4_xplained: 1 offline lab

    multi_v7_defconfig:
        alpine-db: 1 offline lab
        am335x-boneblack: 1 offline lab
        at91-sama5d4_xplained: 1 offline lab
        socfpga_cyclone5_de0_sockit: 1 offline lab
        sun5i-r8-chip: 1 offline lab
        tegra124-jetson-tk1: 1 offline lab

    socfpga_defconfig:
        socfpga_cyclone5_de0_sockit: 1 offline lab

arm64:

    defconfig:
        apq8016-sbc: 1 offline lab
        juno-r2: 1 offline lab

Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)

arm:

    multi_v7_defconfig:
        meson8b-odroidc1:
            lab-baylibre: FAIL
            lab-baylibre-seattle: PASS
        qemu:
            lab-baylibre: FAIL
            lab-mhart: PASS

    vexpress_defconfig:
        qemu:
            lab-baylibre: FAIL
            lab-mhart: PASS

arm64:

    defconfig:
        qemu:
            lab-baylibre: FAIL
            lab-mhart: PASS
        meson-gxbb-p200:
            lab-baylibre: FAIL
            lab-baylibre-seattle: PASS

x86:

    x86_64_defconfig:
        qemu:
            lab-baylibre: FAIL
            lab-mhart: PASS

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 000/141] 4.9.137-stable review

[Rafael David Tinoco]

On 11/11/18 8:24 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.137 release.
> There are 141 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue Nov 13 22:15:38 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.137-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>      Linux 4.9.137-rc1
> 
...
> Prarit Bhargava <prarit@redhat.com>
>      cpupower: Fix coredump on VMWare

Greg, maybe...

commit ef8d3a128c1f1de7ffdedb2f14e846e10fd3fec3
Author: Prarit Bhargava <prarit@redhat.com>
Date:   Mon Oct 8 12:06:19 2018

     cpupower: Fix coredump on VMWare

     [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]

should be dropped from v4.9 (and v4.4) since it causes:

$ make V=1 -C tools/power/cpupower all

gcc -fPIC -DVERSION=\"4.9.136.142.g36c7703\" -DPACKAGE=\"cpupower\" 
-DPACKAGE_BUGREPORT=\"linux-pm@vger.kernel.org\" -D_GNU_SOURCE -pipe 
-DNLS -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare 
-Wno-pointer-sign -Wdeclaration-after-statement -Wshadow -O1 -g -DDEBUG 
-I./lib -I ./utils -o utils/helpers/amd.o -c utils/helpers/amd.c
utils/helpers/amd.c: In function ‘decode_pstates’:
utils/helpers/amd.c:106:39: error: ‘union msr_pstate’ has no member 
named ‘fam17h_bits’
    if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))

Due to nonexistent CPU (flag) support.

Replied to Sasha on specific commits for both, v4.4 and v4.9.

Thanks!
-- 
Rafael D. Tinoco
Linaro Kernel Validation

Re: [PATCH 4.9 000/141] 4.9.137-stable review

[Greg Kroah-Hartman]

On Mon, Nov 12, 2018 at 08:38:44AM -0200, Rafael David Tinoco wrote:
> On 11/11/18 8:24 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.137 release.
> > There are 141 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Tue Nov 13 22:15:38 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.137-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> > -------------
> > Pseudo-Shortlog of commits:
> > 
> > Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >      Linux 4.9.137-rc1
> > 
> ...
> > Prarit Bhargava <prarit@redhat.com>
> >      cpupower: Fix coredump on VMWare
> 
> Greg, maybe...
> 
> commit ef8d3a128c1f1de7ffdedb2f14e846e10fd3fec3
> Author: Prarit Bhargava <prarit@redhat.com>
> Date:   Mon Oct 8 12:06:19 2018
> 
>     cpupower: Fix coredump on VMWare
> 
>     [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
> 
> should be dropped from v4.9 (and v4.4) since it causes:
> 
> $ make V=1 -C tools/power/cpupower all
> 
> gcc -fPIC -DVERSION=\"4.9.136.142.g36c7703\" -DPACKAGE=\"cpupower\"
> -DPACKAGE_BUGREPORT=\"linux-pm@vger.kernel.org\" -D_GNU_SOURCE -pipe -DNLS
> -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare -Wno-pointer-sign
> -Wdeclaration-after-statement -Wshadow -O1 -g -DDEBUG -I./lib -I ./utils -o
> utils/helpers/amd.o -c utils/helpers/amd.c
> utils/helpers/amd.c: In function ‘decode_pstates’:
> utils/helpers/amd.c:106:39: error: ‘union msr_pstate’ has no member named
> ‘fam17h_bits’
>    if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
> 
> Due to nonexistent CPU (flag) support.
> 
> Replied to Sasha on specific commits for both, v4.4 and v4.9.

Now dropped from both queues.

thanks,

greg k-h

Re: [PATCH 4.9 000/141] 4.9.137-stable review

[Guenter Roeck]

On Sun, Nov 11, 2018 at 02:24:19PM -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.137 release.
> There are 141 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue Nov 13 22:15:38 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 150 pass: 150 fail: 0
Qemu test results:
	total: 283 pass: 283 fail: 0

Details are available at https://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.9 000/141] 4.9.137-stable review

[Naresh Kamboju]

On Mon, 12 Nov 2018 at 19:03, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Mon, Nov 12, 2018 at 08:38:44AM -0200, Rafael David Tinoco wrote:
> > On 11/11/18 8:24 PM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.9.137 release.
> > > There are 141 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Tue Nov 13 22:15:38 UTC 2018.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > >     https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.137-rc1.gz
> > > or in the git tree and branch at:
> > >     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> > >
> > > -------------
> > > Pseudo-Shortlog of commits:
> > >
> > > Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > >      Linux 4.9.137-rc1
> > >
> > ...
> > > Prarit Bhargava <prarit@redhat.com>
> > >      cpupower: Fix coredump on VMWare
> >
> > Greg, maybe...
> >
> > commit ef8d3a128c1f1de7ffdedb2f14e846e10fd3fec3
> > Author: Prarit Bhargava <prarit@redhat.com>
> > Date:   Mon Oct 8 12:06:19 2018
> >
> >     cpupower: Fix coredump on VMWare
> >
> >     [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
> >
> > should be dropped from v4.9 (and v4.4) since it causes:
> >
> > $ make V=1 -C tools/power/cpupower all
> >
> > gcc -fPIC -DVERSION=\"4.9.136.142.g36c7703\" -DPACKAGE=\"cpupower\"
> > -DPACKAGE_BUGREPORT=\"linux-pm@vger.kernel.org\" -D_GNU_SOURCE -pipe -DNLS
> > -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare -Wno-pointer-sign
> > -Wdeclaration-after-statement -Wshadow -O1 -g -DDEBUG -I./lib -I ./utils -o
> > utils/helpers/amd.o -c utils/helpers/amd.c
> > utils/helpers/amd.c: In function ‘decode_pstates’:
> > utils/helpers/amd.c:106:39: error: ‘union msr_pstate’ has no member named
> > ‘fam17h_bits’
> >    if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
> >
> > Due to nonexistent CPU (flag) support.
> >
> > Replied to Sasha on specific commits for both, v4.4 and v4.9.
>
> Now dropped from both queues.

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.137-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: cee1cbef71e8a5ebf74ae0e7d3858739df82a4db
git describe: v4.9.136-142-gcee1cbef71e8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.136-142-gcee1cbef71e8

No regressions (compared to build v4.9.136)

No fixes (compared to build v4.9.136)

Ran 21202 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-cap_bounds-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

>
> thanks,
>
> greg k-h

Re: [PATCH 4.9 000/141] 4.9.137-stable review

[Greg Kroah-Hartman]

On Tue, Nov 13, 2018 at 10:39:56AM +0530, Naresh Kamboju wrote:
> On Mon, 12 Nov 2018 at 19:03, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Mon, Nov 12, 2018 at 08:38:44AM -0200, Rafael David Tinoco wrote:
> > > On 11/11/18 8:24 PM, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.9.137 release.
> > > > There are 141 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Tue Nov 13 22:15:38 UTC 2018.
> > > > Anything received after that time might be too late.
> > > >
> > > > The whole patch series can be found in one patch at:
> > > >     https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.137-rc1.gz
> > > > or in the git tree and branch at:
> > > >     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > > > and the diffstat can be found below.
> > > >
> > > > thanks,
> > > >
> > > > greg k-h
> > > >
> > > > -------------
> > > > Pseudo-Shortlog of commits:
> > > >
> > > > Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > >      Linux 4.9.137-rc1
> > > >
> > > ...
> > > > Prarit Bhargava <prarit@redhat.com>
> > > >      cpupower: Fix coredump on VMWare
> > >
> > > Greg, maybe...
> > >
> > > commit ef8d3a128c1f1de7ffdedb2f14e846e10fd3fec3
> > > Author: Prarit Bhargava <prarit@redhat.com>
> > > Date:   Mon Oct 8 12:06:19 2018
> > >
> > >     cpupower: Fix coredump on VMWare
> > >
> > >     [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
> > >
> > > should be dropped from v4.9 (and v4.4) since it causes:
> > >
> > > $ make V=1 -C tools/power/cpupower all
> > >
> > > gcc -fPIC -DVERSION=\"4.9.136.142.g36c7703\" -DPACKAGE=\"cpupower\"
> > > -DPACKAGE_BUGREPORT=\"linux-pm@vger.kernel.org\" -D_GNU_SOURCE -pipe -DNLS
> > > -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare -Wno-pointer-sign
> > > -Wdeclaration-after-statement -Wshadow -O1 -g -DDEBUG -I./lib -I ./utils -o
> > > utils/helpers/amd.o -c utils/helpers/amd.c
> > > utils/helpers/amd.c: In function ‘decode_pstates’:
> > > utils/helpers/amd.c:106:39: error: ‘union msr_pstate’ has no member named
> > > ‘fam17h_bits’
> > >    if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
> > >
> > > Due to nonexistent CPU (flag) support.
> > >
> > > Replied to Sasha on specific commits for both, v4.4 and v4.9.
> >
> > Now dropped from both queues.
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Great, thanks for letting me know.

greg k-h