From: Nicolin Chen <b42378@freescale.com>
To: <vinod.koul@intel.com>, <dan.j.williams@intel.com>,
<s.hauer@pengutronix.de>, <timur@tabi.org>,
<shawn.guo@linaro.org>, <broonie@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dmaengine@vger.kernel.org>,
<linuxppc-dev@lists.ozlabs.org>, <alsa-devel@alsa-project.org>,
<rob.herring@calxeda.com>, <mark.rutland@arm.com>,
<swarren@wwwdotorg.org>, <pawel.moll@arm.com>,
<ijc+devicetree@hellion.org.uk>
Subject: [PATCH v7 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi
Date: Wed, 13 Nov 2013 22:55:27 +0800 [thread overview]
Message-ID: <5bfdcb2bc7f0cd6064a3c05e592fa361bf1fe444.1384352281.git.b42378@freescale.com> (raw)
In-Reply-To: <cover.1384352281.git.b42378@freescale.com>
Use dual-fifo sdma scripts instead of shared scripts for ssi on i.MX series.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/imx51.dtsi | 4 ++--
arch/arm/boot/dts/imx53.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++++------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++++------
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 54cee65..1a71eac 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -154,8 +154,8 @@
reg = <0x70014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
- dmas = <&sdma 24 1 0>,
- <&sdma 25 1 0>;
+ dmas = <&sdma 24 22 0>,
+ <&sdma 25 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80..7208fde 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -153,8 +153,8 @@
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
- dmas = <&sdma 24 1 0>,
- <&sdma 25 1 0>;
+ dmas = <&sdma 24 22 0>,
+ <&sdma 25 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 57e9c38..6e096ca 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -223,8 +223,8 @@
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
clocks = <&clks 178>;
- dmas = <&sdma 37 1 0>,
- <&sdma 38 1 0>;
+ dmas = <&sdma 37 22 0>,
+ <&sdma 38 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
@@ -236,8 +236,8 @@
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
clocks = <&clks 179>;
- dmas = <&sdma 41 1 0>,
- <&sdma 42 1 0>;
+ dmas = <&sdma 41 22 0>,
+ <&sdma 42 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
@@ -249,8 +249,8 @@
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
clocks = <&clks 180>;
- dmas = <&sdma 45 1 0>,
- <&sdma 46 1 0>;
+ dmas = <&sdma 45 22 0>,
+ <&sdma 46 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c46651e..b32ba99 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -195,8 +195,8 @@
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
clocks = <&clks IMX6SL_CLK_SSI1>;
- dmas = <&sdma 37 1 0>,
- <&sdma 38 1 0>;
+ dmas = <&sdma 37 22 0>,
+ <&sdma 38 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
@@ -207,8 +207,8 @@
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
clocks = <&clks IMX6SL_CLK_SSI2>;
- dmas = <&sdma 41 1 0>,
- <&sdma 42 1 0>;
+ dmas = <&sdma 41 22 0>,
+ <&sdma 42 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
@@ -219,8 +219,8 @@
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
clocks = <&clks IMX6SL_CLK_SSI3>;
- dmas = <&sdma 45 1 0>,
- <&sdma 46 1 0>;
+ dmas = <&sdma 45 22 0>,
+ <&sdma 46 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
--
1.8.4
next prev parent reply other threads:[~2013-11-13 14:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-13 14:55 [PATCH v7 0/4] Add dual-fifo mode support of i.MX ssi Nicolin Chen
2013-11-13 14:55 ` [PATCH v7 1/4] dma: imx-sdma: Add sdma firmware version 2 support Nicolin Chen
2013-11-13 14:55 ` [PATCH v7 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script Nicolin Chen
2013-11-13 14:55 ` [PATCH v7 3/4] ASoC: fsl_ssi: Add dual fifo mode support Nicolin Chen
2013-11-13 14:55 ` Nicolin Chen [this message]
2013-11-22 16:31 ` [PATCH v7 0/4] Add dual-fifo mode support of i.MX ssi Nicolin Chen
2013-11-25 2:11 ` Shawn Guo
2013-11-28 8:41 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5bfdcb2bc7f0cd6064a3c05e592fa361bf1fe444.1384352281.git.b42378@freescale.com \
--to=b42378@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=s.hauer@pengutronix.de \
--cc=shawn.guo@linaro.org \
--cc=swarren@wwwdotorg.org \
--cc=timur@tabi.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).