From: Stephen Boyd <swboyd@chromium.org>
To: Rajendra Nayak <rnayak@codeaurora.org>,
agross@kernel.org, bjorn.andersson@linaro.org,
robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, mka@chromium.org,
Kiran Gunda <kgunda@codeaurora.org>,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: Re: [PATCH v3 08/11] arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
Date: Tue, 29 Oct 2019 09:38:50 -0700 [thread overview]
Message-ID: <5db86b1b.1c69fb81.be45f.0bb2@mx.google.com> (raw)
In-Reply-To: <20191023090219.15603-9-rnayak@codeaurora.org>
Quoting Rajendra Nayak (2019-10-23 02:02:16)
> diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> new file mode 100644
> index 000000000000..20eb928e5ce3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +// Copyright (c) 2019, The Linux Foundation. All rights reserved.
> +
> +#include <dt-bindings/iio/qcom,spmi-vadc.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +&spmi_bus {
> + pm6150_lsid0: pmic@0 {
> + compatible = "qcom,pm6150", "qcom,spmi-pmic";
> + reg = <0x0 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm6150_pon: pon@800 {
> + compatible = "qcom,pm8998-pon";
> + reg = <0x800>;
> + mode-bootloader = <0x2>;
> + mode-recovery = <0x1>;
Can this have status = "disabled"? Or is the idea that if the pmic power
button isn't used it should be disabled in the board dts file?
> +
> + pwrkey {
> + compatible = "qcom,pm8941-pwrkey";
> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_POWER>;
> + };
> + };
> +
> + pm6150_temp: temp-alarm@2400 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0x2400>;
> + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
> + io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
> + io-channel-names = "thermal";
> + #thermal-sensor-cells = <0>;
> + };
> +
> + pm6150_adc: adc@3100 {
> + compatible = "qcom,spmi-adc5";
> + reg = <0x3100>;
> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> +
> + adc-chan@ADC5_DIE_TEMP {
> + reg = <ADC5_DIE_TEMP>;
> + label = "die_temp";
> + };
> + };
> +
> + pm6150_gpio: gpios@c000 {
> + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
> + reg = <0xc000 0xa00>;
Drop the size?
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> + <0 0xc1 0 IRQ_TYPE_NONE>,
> + <0 0xc2 0 IRQ_TYPE_NONE>,
> + <0 0xc3 0 IRQ_TYPE_NONE>,
> + <0 0xc4 0 IRQ_TYPE_NONE>,
> + <0 0xc5 0 IRQ_TYPE_NONE>,
> + <0 0xc6 0 IRQ_TYPE_NONE>,
> + <0 0xc7 0 IRQ_TYPE_NONE>,
> + <0 0xc8 0 IRQ_TYPE_NONE>,
> + <0 0xc9 0 IRQ_TYPE_NONE>;
Isn't this supposed to go away?
> +
> + interrupt-names = "pm6150_gpio1", "pm6150_gpio2",
> + "pm6150_gpio3", "pm6150_gpio4",
> + "pm6150_gpio5", "pm6150_gpio6",
> + "pm6150_gpio7", "pm6150_gpio8",
> + "pm6150_gpio9", "pm6150_gpio10";
And this? And have gpio-ranges and use the irqdomain work. Basically,
should look like pm8998.
> + };
> + };
> +
> + pm6150_lsid1: pmic@1 {
> + compatible = "qcom,pm6150", "qcom,spmi-pmic";
> + reg = <0x1 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +};
next prev parent reply other threads:[~2019-10-29 16:38 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-23 9:02 [PATCH v3 00/11] Add device tree support for sc7180 Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 01/11] dt-bindings: qcom: Add SC7180 bindings Rajendra Nayak
2019-10-25 19:50 ` Rob Herring
2019-11-04 6:03 ` Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 02/11] arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc Rajendra Nayak
2019-10-29 16:49 ` Stephen Boyd
2019-11-04 6:15 ` Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 03/11] dt-bindings: arm-smmu: update binding for qcom sc7180 SoC Rajendra Nayak
2019-10-25 19:51 ` Rob Herring
2019-11-04 6:04 ` Rajendra Nayak
2019-10-29 16:42 ` Stephen Boyd
2019-11-04 6:11 ` Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 04/11] arm64: dts: sc7180: Add device node for apps_smmu Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 05/11] arm64: dts: qcom: sc7180: Add cmd_db reserved area Rajendra Nayak
2019-10-23 12:16 ` Sibi Sankar
2019-10-24 2:30 ` Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 06/11] arm64: dts: qcom: sc7180: Add rpmh-rsc node Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 07/11] arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device Rajendra Nayak
2019-10-29 16:41 ` Stephen Boyd
2019-10-30 6:06 ` kgunda
2019-10-30 14:37 ` Stephen Boyd
2019-11-04 6:10 ` Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 08/11] arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals Rajendra Nayak
2019-10-29 16:38 ` Stephen Boyd [this message]
2019-10-30 7:06 ` kgunda
2019-10-30 14:37 ` Stephen Boyd
2019-10-23 9:02 ` [PATCH v3 09/11] arm64: dts: qcom: sc7180-idp: Add RPMh regulators Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 10/11] arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver Rajendra Nayak
2019-10-23 9:02 ` [PATCH v3 11/11] arm64: dts: qcom: sc7180: Add pdc interrupt controller Rajendra Nayak
2019-10-25 19:47 ` Matthias Kaehlcke
2019-11-04 6:03 ` Rajendra Nayak
2019-10-29 16:50 ` Stephen Boyd
2019-10-30 19:50 ` Matthias Kaehlcke
2019-11-04 6:17 ` Rajendra Nayak
2019-11-04 6:33 ` Bjorn Andersson
2019-11-04 6:56 ` Rajendra Nayak
2019-11-04 7:10 ` Bjorn Andersson
2019-11-05 0:34 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5db86b1b.1c69fb81.be45f.0bb2@mx.google.com \
--to=swboyd@chromium.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kgunda@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).